4 best 5 channel amp for cars

A 5-channel car amplifier is a specialized electronic device designed to enhance the audio experience in a vehicle. It's a type of multichannel amplifier specifically configured to power various components of a car's audio system. Here's what you need to know about 5-channel car amplifiers:

Number of Channels: A 5-channel amp typically has five separate channels for power distribution. These channels are designed to power different components in a car's audio system.
Channel Configuration:
- Front Channels (2 Channels): These are used to power the front speakers, which are usually responsible for producing vocals and other high-frequency sounds.
- Rear Channels (2 Channels): These are for the rear speakers, which often handle the mid-range frequencies.
- Subwoofer Channel (1 Channel): This channel is specifically designed for powering a subwoofer, which is responsible for producing low-frequency bass sounds.
Power Rating and RMS: 5-channel amps come with specific power ratings measured in watts. It's important to match the power output of the amp with the power handling capabilities of your speakers for optimal performance. RMS (Root Mean Square) power is a crucial metric to consider as it indicates the continuous power that an amplifier can deliver.
Compatibility and Impedance: Ensure that the amp's impedance (ohms) matches the impedance of your speakers. Mismatched impedance can result in inefficient power transfer and may even damage the equipment.
Crossovers and Filters: Many 5-channel amplifiers come equipped with adjustable crossovers and filters. These allow you to fine-tune the frequencies that each channel sends to the speakers, ensuring that each component operates within its optimal range.
Bridgeable Channels: Some 5-channel amps have bridgeable channels, which means you can combine two channels to power a single speaker or subwoofer with more power. This can be useful for powering a high-performance subwoofer.
Size and Installation: Consider the physical size of the amplifier and ensure it fits in your car's available space.Additionally, installation should be done carefully, following manufacturer instructions and considering factors like ventilation and wiring.
Brand and Model Variations: There are various brands and models available, each with its own unique features and specifications. It's important to research and choose one that meets your specific needs and preferences.
Budget Considerations: Prices for 5-channel car amplifiers can vary widely based on brand, power output, and additional features. It's important to establish a budget and look for an amplifier that provides the best value for your specific requirements.

Remember, choosing the right 5-channel car amplifier is crucial for achieving the best sound quality in your vehicle. Consider factors like compatibility, power requirements, and desired audio performance to make an informed decision.

Below you can find our editor's choice of the best 5 channel amp for cars on the market

Skar Audio SK-M9005D Compact Full-Range Class D 5 Channel Car Amplifier, 900W

Based on 128 reviews Check latest price

Product description

The Scar Audio SK-M9005D full-range five channel amplifier offers high performance from an ultra-compact chassis. This Class D amplifier uses less power, takes up less space, and generates less heat than traditional amp designs, making it the perfect solution when space is at a premium and sound quality is the ultimate goal. Don't let its size fool you, the SK-M9005D boasts an impressive 900 Watts of RMS power output (continuous), providing the versatility to power multiple sets of speakers as well as a subwoofer in your system. The SK-M9005D provides you with the tone controls you need to tune your system so that your speakers and sub sound their best. Utilizing the high-pass filters, you can remove the extreme low bass from your full-range speakers, so they'll play more efficiently. You can adjust the subwoofer channel's low-pass filter and bass boost to get just the right bass tone. This five channel amplifier comes with a remote bass knob and cable, providing the ability to control the bass from the dash. In addition, the SK-M9005D utilizes an adapter harness for the speaker outputs allowing for an easier installation. Utilizes 8 Gauge Power and Ground Input Terminals. RMS Power @ 2 Ohms: 85 Watts x 4 + 450 Watts x 1 (14. 4v), Frequency Response: 10Hz - 20kHz for CH 1-4 & 10Hz - 500Hz for CH 5, Crossover Control: HPF / Full-Range / LPF. 4-Way Protection Circuitry Built-in (Thermal, Voltage, Speaker, DC), Remote Bass Knob and Cable Included. Amplifier's Physical Dimensions: 12. 4 in x 4. 6 in x 1. 7 in (L x W x H)

Ultra Compact MOSFET 5-Channel Class D Car Amplifier
RMS Power @ 2 Ohm: 85 Watts x 4 + 450 Watts x 1 (14. 4v)
Frequency Response: 10Hz - 20kHz for CH 1-4 & 10Hz - 500Hz for CH 5
Crossover Control: HPF / Full-Range / LPF | Built In 4-Way Protection Circuitry
Remote Bass Knob/Cable and Speaker Output Adapter Harness Included

User questions & answers

Question:	How's this for an infinity based sq setup? plan on getting kappa i plan on getting kappa 6x8's and a pair of low-profile 10-12" reference subs
Answer:	Yes you can if you seperate the wire down to 1 wire. Dont double twist them.
Question:	What is the continues power out the sub channel
Answer:	No, it is not ofc (oxygen free copper) it is the cheaper CCA (coper clad aluminum) if your pushing any really power I would advise getting a OFC kit
Question:	can I strap another amp to my room 4500 and run 2 6.5 inch subs off that if so which amp they are Skar Audio woofers
Answer:	Just like the picture. Power and ground have ring terminals on one side only.
Question:	When using hpf mode does that only filter channels 1-4 to block low frequencies, and leave channel 5 to have its 10-500hz full range still
Answer:	It will fit

KICKER KXA800.5 Car Audio 5 Channel Amp Amplifier 44KXA8005 (Renewed)

Kicker

Based on 18 reviews Check latest price

Product description

Class D Power Plant
SHOCwave Bass Restoration Processor
KXARC Wireless Remote Included
Gain Control With Optimal Input Indicator
Variable 24dB Subsonic Filter
FIT2 (Fail-Safe Integration Technology) Circuitry
Variable 24dB Crossover
DSP-Controlled Preamp
KickEQ 18dB Variable Bass Boost
Audio Control Compartment With Cover
Black Anodized Aluminum Chassis
Top-Mounted Red LED Light Pipe
Power Handling
Frequency Response:
- AMPS 1 - 2: 10Hz-20kHz
- SUB: 10Hz-160Hz
Signal-to-Noise Ratio: 95dB
Input Sensitivity: 250mV-10V
KickEQ Bass Boost: 0-18dB @ 40Hz, Center Frequency-20Hz-80Hz, Bandwidth 1-5
Bass Remote: Inlcuded
CEA Power Rating: 50W x 4 @ 4 ohms (10Hz-20,000Hz), 200W x 1 @ 4 ohms (40Hz-160Hz)
Dimensions:
- Length: 12-3/4"
- Height: 2-1/8"
- Width: 8-5/16"

KICKER® KX amplifiers are as diverse as they are powerful. Five mono amplifiers and four multichannel amps put control and power at your fingertips. This KX 800-watt five channel amplifier is a full system in a single package. This amp also features FIT2™ (Fail-Safe Integration Technology) – giving you superior power, clarity and dependability with nearly any stock or aftermarket radio.This item is Certified Refurbished.
SHOCwave Bass Restoration Processor
KXARC Wireless Remote Included
Gain Control With “Optimal Input” Indicator
Variable 24dB Subsonic Filter

User questions & answers

Question:	Is this 2ohm stable
Answer:	don't really know I have a 2012 badboy ZT with a 27hp kohler engine and it worked perfect.Sorry can't be of more help.

Kicker 46CXA6605 Car Audio 5 Channel Amp Speaker & Sub 1200W W/Kicker 43CXARC Bass Remote Control

Based on 1 reviews Check latest price

Product description

Five Channels of Fun The CXA660.5 Amplifier is built to be the complete package in one cool-looking amp. The CXA660.5 Amplifier uses powerful Class A/B technology to power four mid/high-range channels and an ultra-efficient Class D power plant for the bass channel. The amp also comes equipped with FIT+ (Fail-safe Integration Technology-PLUS), giving you superior clarity and dependability. KickEQ variable bass boost gives you as much as a 6dB of extra bump with a simple turn of the knob. A powerful 12dB crossover and 24dB subsonic filter is also included. Feature Highlights: Class A/B full-range channels Class D bass channel included for one amp to run an entire system Three-second turn-on/off delay to eliminate unwanted interference Variable 12dB crossovers provides control to dial in perfect sound KickEQ 6dB variable bass boost for those additional low frequencies FIT+ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio Accepts up to 40-volt input signal Small footprint for easier installation Vertical mounting hardware included for another unique look Specifications: MODEL:CXA660.5 Power (watts/ch) 4 Ohm Stereo: 65x4 Power (watts/ch) 2 Ohm Stereo: 90x4 Power (watts/ch) 4 Ohm Mono: 180x2 Power (watts/ch) 4 Ohm Mono Sub Ch: 150x1 Power (watts/ch) 2 Ohm Mono Sub Ch: 300x1 CXRC Remote Bass Capable (sold sep.): yes Dimensions (in, cm): (all models 2-3/8, 5.9H x 6-3/4, 17 W x ...L): 14-1/8, 35.7 Frequency Response (Hz): 10Hz-20kHz Frequency Response (Hz – Sub Ch.): 25Hz-200Hz Input Sensitivity: 250mV-10V (Low Level) 1V-40V (High Level) Signal-to-Noise Ratio: 90dB Active Crossover: Amp 1-2: High Pass 10-200Hz @ 12dB/Octave Sub Channel: Low Pass 50-200Hz @ 12dB/Octave Subsonic Filter: 25Hz @24dB/Octave KickEQ Boost: Variable 0-6dB @40Hz

Class A/B full-range channels
Class D bass channel included for one amp to run an entire system
Three-second turn-on/off delay to eliminate unwanted interference
Variable 12dB crossovers provides control to dial in perfect sound, KickEQ 6dB variable bass boost for those additional low frequencies
Comes with Kicker 43CXARC Bass Remote Control

Rockville RVF-2 1200w Peak/300w CEA RMS 4 Channel Car Amplifier Stereo Amp

Based on 270 reviews Check latest price

Features: Rockville RVF-2 1200w Peak/300w CEA RMS 4 Channel Car Amplifier, 2 Ohm: 75 Watts x 4 Channel <1% THD+N, 4 Ohm: 55 Watts x 2 Channel <1% THD+N
4 Ohms bridged: 150 Watts x 2 Channel <1% THD+N, High-Speed MOSFET Power Supply, Fully Adjustable 6dB / Octave Crossover with Differential Circuitry, Low Pass Filter: 50Hz - 200Hz
High Pass Filter: 50Hz - 1.2KHz, Full IC-Controlled Protection Circuitry, Fully Adjustable 12dB Bass Equalizer, Mute and Delay Soft Start System
Status Mode LED Indicator, Minimum THD at Rated Power: 90dB, Under Voltage Protection at 9V
Over Voltage Protection at 16V, Frequency Response: 20Hz – 20KHz, Damping Factor: >150 @ 100Hz, Fuse: 20A x 2, Dimensions: (L x W x H) 12.2" x 8.5" x 2.24", Weight: 6.1 lbs