8 best orion 5 channel amplifiers

• 100-FEET (30.5m) [FROSTED BLUE/BLACK 14 GAUGE SPEAKER WIRE ] - The lower the gauge number, the thicker the wire. Thicker wire presents less resistance to current flow.
• COPPER CLAD ALUMINUM (CCA) - CCA wiring provides a good conductor for transmitting audio. This is the most economical option when choosing speaker wire.
• RUGGED PVC JACKET - Allows free, wide and seamless adjustment of the required physical properties of this wire such as flexibility, elasticity, and impact resistance.
• EASY POLARITY IDENTIFICATION - This two color jacket allows for easy polarity identification. Making a polarity mistake could be damaging to your audio equipment.
• SOFT TOUCH JACKET - The jacket on our cable is designed with the installer in mind. The flexibility of this jacket allows for easy routing and has a low memory.

User questions & answers

Question:	Can this wire be used for in ceiling speakers
Answer:	it is regular speaker wire. i installed in wall speaker with it, which is similar. You will need to check with your local building codes on the installation. some places require all wiring to be stapled if it will impede with your travel in the attic. if you overhang some of them, you will not need to staple.
Question:	Can it handel 1000watt surround sound system
Answer:	I have it connected to a new Sony Home Theater 750 Watt System and I love the sound. My best guess is yes.
Question:	Is this thin enough to run through a drop ceiling to not effect the tiles? Want to use to run rear surround speakers
Answer:	Not exactly sure what you mean by "through a drop ceiling to not effect the tiles". If you mean without having to cut a notch in the tile, or tile framework, for the wire to run thorough--maybe. The wire dimensions are roughly 1/8" (3.175mm) by 1/4" (6.35mm), so it depends on the amount of play you have between your tiles and their framework, or the frame work and your wall depending on how you intend to route the wires. Good luck! BTW: It is more flexible than a 100% copper wire of equal gage.
Question:	Is this wire good for outdoor speakers
Answer:	Seems to me the jacket is sufficient enough to protect the wire outdoors, but you'd certainly have to take extra measures to protect the connections.

Product features

100ft of 14 Gauge Speaker Wire

• 100 feet (30.5m)
• True Spec Stranded Wire
• Rugged Blue/Black Frosted PVC Jacket
• Two Color Jacket for Easy Polarity Identification
• Copper Clad Aluminum Conductor (CCA)
• Compact Spool for Easy Storage

Perfect for Car Audio Systems

• Rugged PVC Jacket Makes it Easy to Route through Car Panels
• Easily Installs into Most Crimp Terminals
• Jacket Strips Easily for a Quick Install

Great for Home Theater Systems

• Low Memory Jacket Makes it Easy to Route Close to Wall Moldings
• Easily Installs into Most Banana Plugs
• Jacket Strips Easily for a Quick Install

Product description

Rubicon amplifiers are all new. We adopted the optimum class D performance, reliability, and footprint of the Picasso Nano platform and present to you Rubicon Nano. At first glance, you'll notice several key improvements. Rubicon Nano's signal inputs, power/ground, and speaker connections are all re-located to the leading edge of the chassis, for an easier, more appealing install. All pre-amp & crossover options are conveniently located on the top surface, making adjustment after installation possible. What you might not notice are additions to the circuit board, including increased power supply & output stage components, & monoblock bridging capability.

• High Efficiency Class D Full Range Amplifiers
• Hybrid Aluminum Alloy Heatsink for Optimum Dissipation
• 2-ohm Stereo & 4-ohm Bridged Class D Full Range
• Monoblock Bridging Capability for Double Amplifier Application
• MOSFET Power Supply w/ Audiophile Grade IRTM Transistors

User questions & answers

Question:	What are the rms wattage rating for all 5 channels? 2 ohm and 4 ohm? didn't see them listed
Answer:	4 ohms: 75 x 4 channels + 300 x 1(sub) 2 ohms: 100 x 4 channels + 500 x 1(sub)
Question:	Can this amplifier run 4subwoffers
Answer:	I wouldn't. It's only rated at 500 watts on the mono channel. I have it pushing an sa10 in my wife's car. Plus all four door speakers.
Question:	Does this sale come with a dash Mount gain control
Answer:	Yes it does come with it...
Question:	How many watts on the sub channel
Answer:	Wattage for the Sub channel is 300w 4 ohm & 500w 2 ohm.

Product description

The Scar Audio SK-M9005D full-range five channel amplifier offers high performance from an ultra-compact chassis. This Class D amplifier uses less power, takes up less space, and generates less heat than traditional amp designs, making it the perfect solution when space is at a premium and sound quality is the ultimate goal. Don't let its size fool you, the SK-M9005D boasts an impressive 900 Watts of RMS power output (continuous), providing the versatility to power multiple sets of speakers as well as a subwoofer in your system. The SK-M9005D provides you with the tone controls you need to tune your system so that your speakers and sub sound their best. Utilizing the high-pass filters, you can remove the extreme low bass from your full-range speakers, so they'll play more efficiently. You can adjust the subwoofer channel's low-pass filter and bass boost to get just the right bass tone. This five channel amplifier comes with a remote bass knob and cable, providing the ability to control the bass from the dash. In addition, the SK-M9005D utilizes an adapter harness for the speaker outputs allowing for an easier installation. Utilizes 8 Gauge Power and Ground Input Terminals. RMS Power @ 2 Ohms: 85 Watts x 4 + 450 Watts x 1 (14. 4v), Frequency Response: 10Hz - 20kHz for CH 1-4 & 10Hz - 500Hz for CH 5, Crossover Control: HPF / Full-Range / LPF. 4-Way Protection Circuitry Built-in (Thermal, Voltage, Speaker, DC), Remote Bass Knob and Cable Included. Amplifier's Physical Dimensions: 12. 4 in x 4. 6 in x 1. 7 in (L x W x H)

• Ultra Compact MOSFET 5-Channel Class D Car Amplifier
• RMS Power @ 2 Ohm: 85 Watts x 4 + 450 Watts x 1 (14. 4v)
• Frequency Response: 10Hz - 20kHz for CH 1-4 & 10Hz - 500Hz for CH 5
• Crossover Control: HPF / Full-Range / LPF | Built In 4-Way Protection Circuitry
• Remote Bass Knob/Cable and Speaker Output Adapter Harness Included

User questions & answers

Question:	How's this for an infinity based sq setup? plan on getting kappa i plan on getting kappa 6x8's and a pair of low-profile 10-12" reference subs
Answer:	Yes you can if you seperate the wire down to 1 wire. Dont double twist them.
Question:	What is the continues power out the sub channel
Answer:	No, it is not ofc (oxygen free copper) it is the cheaper CCA (coper clad aluminum) if your pushing any really power I would advise getting a OFC kit
Question:	can I strap another amp to my room 4500 and run 2 6.5 inch subs off that if so which amp they are Skar Audio woofers
Answer:	Just like the picture. Power and ground have ring terminals on one side only.
Question:	When using hpf mode does that only filter channels 1-4 to block low frequencies, and leave channel 5 to have its 10-500hz full range still
Answer:	It will fit

• RMS Watts @ 4 Ohm Stereo 12.6V:   1050 Watts X 1 Channel / RMS Watts @ 2 Ohm Stereo 12.6V: 1600 Watts X 1 Channel / RMS Watts @ 1 Ohm Stereo 12.6V: 2500 Watts X 1 Channel
• Nominal power output 1ohm(watts): 5000 Watts, Max music power: 10000 Watts
• Frequency Response   20Hz~250KHz
• Signal Noise Ratio: 65dB
• Hi Pass Freq. 30Hz-250Hz / Low Pass Freq.

User questions & answers

Question:	Is this a good amp to push 2 p3 15’s wired at 4 ohms
Answer:	I would wire them to 2 ohm each then bridge them for a 1 ohm load... that will slap hard...
Question:	This Mp can push two rockville destroyer 12d
Answer:	May need to get the Xtreme 4K for the destroyers
Question:	What if birth sheet comes in under rated
Answer:	My birthsheet for my xtr 2500.1dz was rated [email protected] volts at 1ohm... plenty power just make sure you have good electrical in your vehicle
Question:	What's the maximum current draw for this amplifier
Answer:	It has a maximum current draw of 250 amps
Question:	anyonw knows what the 3 fuses on this are for
Answer:	They will pop before it blows your amp. Just like a breaker in your house.
Question:	would this amp be enough to push 2 rockford p3 dual 4ohm wire to 1ohm
Answer:	The amp is 1 ohm stable. I own the exact one. And it is great. The lowest resistance u are gonna get outta the subs is gonna be around 2 ohm being that they are 4ohm docs and not 2ohm dvcs
Question:	Will this push a 12” cobalt
Answer:	Yes it will push two 12", but you have to bridge it.
Question:	Would this run 2 mtx 10” 400 watt rms 4ohm subs if im not constantly at full power
Answer:	It should be fine I have a kicker comp r 800w rms it pushes it till I cracks and still has a lot of power left

Product description

3-way Elec Crossover

• 3-way Electronic Crossover
• 2/4/6 Channel Input
• 6-Channel / 5 Volt RCA Outputs (Front/Rear/Subwoofer)
• Front/Rear/Subwoofer Lever Control
• Subwoofer Equalizer and Boost Level Controls
• 6/4/2 Channel RCA Inputs
• 6-Channel / 5 Volt RCA Outputs (Front/Rear/Subwoofer)

User questions & answers

Question:	Is the actual "crossing-over" done with those adjustable restistors used to select the frequency? Are those of equal quality to a fixed crossover
Answer:	All I can tell you is I have had this crossover multiple times over the last 15 or so years and this time when I first installed it, it worked just fine for the money but it seems like over time it loses it's ability to do it's job and then it just stops. The highs will just go out and the bass boost and lows will work just fine. I think it is a design flaw that they will never correct because you don't pay them enough money for a really good product I guess. But as long as you just want medium performance this think is ok but it's not the best.
Question:	Just I whant now Shipping weight
Answer:	Hello, Just to be on the safe side, let's say 7 pounds. Thank you.
Question:	May i use this in home studio to send low freq( 20hz-15ohz) to sub, the rest to monitors
Answer:	Yes. Just make sure the crossover outputs aren't so high that it causes your amplifier to distort.
Question:	Can I connect the speakers directly to this crossover or is an amp required? I'm not looking to rattle anyone's windows
Answer:	You will need an amplifier. Preferably an amplifier with RMS power least abilities so the amp will be less. The crossover is an addition to the amplifiers frequency and bass gain! Extremely a game changer when adding it to your amplifier. It can diliver deep bass that is unreachable with just an amplifier alone.

Product features

Clarion MCD360 2/3-Way 6-Channel Electronic Crossover w/ 5-Volt RCA Outputs + Subwoofer Equalizer

This versatile 3-Way Electronic Crossover offers inputs for two- or three-way system setups with rear fader control. Users also get a wired remote subwoofer level control.

• 2/4/6 Channel Input
• 6-Channel / 5 Volt RCA Outputs (Front/Rear/Subwoofer)
• Front/Rear/Subwoofer Lever Control
• Subwoofer Equalizer and Boost Level Controls
• High-Pass Crossover Frequency Multiplier
• Remote Subwoofer Level Control (Included)
• Gold Plated Terminals
• Dimensions:6″(W) × 3/4″(H) × 7″(D)

• Mono: 1 x Taramps Electronics MD5000.2 Full Range 2 Ohms 5000W Amplifier
• Operation Class: Class D Channels - 2 Ohms: 5000W
• Input Impedance: 10K Ohms Output Impedance: 2 Ohms
• Bass Boost: 0 to 10.5dB(50Hz)
• MD 5000.2 amplifier from Taramp's is intended for high-performance automotive audio systems and high-performance engineering

User questions & answers

Question:	Hi can this amp push 2 star audio , one at 1500 rms and another one at 1250 rms
Answer:	Takes 3 plus hours for a full charge.
Question:	Will this amp be good for 2 audiopipe 2 ohm peak power 2200 and rms
Answer:	I dont know but what i do know is that this battery dies very very quickly.
Question:	Is the 2 ohm model safe to run at 1 ohm
Answer:	dont compare to my dewalt drill battery
Question:	Does it come with the clip monitor
Answer:	At higher pressures, the compressor shuts off. For example, at around 35psi (goes to around 45psi for me) it shuts off, at below that, it pretty much stays on all the time.

Product description

ORION Cobalt 4 Channel Amplifier 2500 Watts for Car Audio Speakers Subwoofers

• Features – The 4 channel bass boost amplifier has features like - Frequency Response: 10HZ-30KHZ, Remote Bass Knob, 2-way protection, hi/low pass crossovers, hi/low level inputs, MOSFET Power Supply, Thermal Protection, Gain Control, 2 Ohm Stable
• Class A/B – This multichannel subwoofer amplifier exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class b amplifier has no current flowing.
• Quality - This Class A/B 4 channel amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others.
• Power – This Class A/B 2500 watt Amplifier has a power rating distribution as followed 625 X 4 MAX @ 2 OHMS. The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design.
• Low/High Level Inputs – The multichannel amplifier for car speakers come with low/high level inputs. A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers

• RMS Watts @ 4 Ohm Stereo 12. 6V:   600 Watts X 1 Channel / RMS Watts @ 2 Ohm Stereo 12. 6V: 975 Watts X 1 Channel / RMS Watts @ 1 Ohm Stereo 12. 6V: 1500 Watts X 1 Channel
• RMS Power Watts:       6000 Watts
• Frequency Response   20Hz~300KHz
• Signal Noise Ratio:       90dB
• Hi Pass Freq.    30Hz-250Hz / Low Pass Freq. 30Hz-250Hz

User questions & answers

Question:	Will this amp power 3 12 orion
Answer:	Asus Rampage III Gene motherboard based on Intel 1st generation Core i7 processors and X58 chipset supported low density DDR3 memory up to 24GB in 6 slots. It does not work with high density DDR3 HyperX FURY memory. Please upgrade Rampage III Gene with Kingston ValueRAM low density DDR3 1333MHz 4GB DIMM, part number KVR1333D3N9/4G. Install two (2) 4GB modules for a total of 8GB upgrade. Unfortunately low density HyperX products compatible with the board are out of production. Thank you.
Question:	I see one review mentioned overheating, has anyone else experienced any overheating issues
Answer:	You should be okay, I have been using them for awhile. these memories are volatile(ram), so doesn't affect when overclocking for gaming. What affects overclocking is a low speed CPU and of course you have to have some memory but the one compatible with your motherboard.
Question:	Enough for 2 Kicker 12” L7’s at 1 ohm
Answer:	The one can be cheaper than the two. I bought the one so later on down the road I could purchase another one.
Question:	How many channels
Answer:	Hello Tuhin,Although we have not tested this configuration it looks as if it should work based on your PC specifications. Keep in mind your system may default to the maximum of memory speed of 1600Mhz as you may need to adjust the speeds in your BIOS. You can also check out the following: KVR16E11/8HB. or further questions feel free to contact us at the following number: 800-435-0640 M-F 6AM-6PM PST Reference case: SR287781.Thank you for considering Hyper-X,Felinni M. @ Kingston Technology
Question:	when you turn up your volume does the amp distort your speakers
Answer:	Hello SUNIL, HyperX Impact HX424S14IBK2/32 meets MSI GS73VR 6VR Stealth system specifications and works well with the laptop. GS73VR clocks the Impact modules to system supported memory speed. Install the Impact kit to reach maximum 32GB RAM. Thank you!-Kai @ HyperX TS
Question:	How much true rms watts does this amp push out if i put 4 mids on it
Answer:	Hi Carlos, HyperX Impact DDR4 32GB laptop memory kit, HX424S14IBK2/32, meets Asus ROG GL502VS system specifications and works in the laptop just fine. Install the Impact kit to reach system maximum 32GB RAM. Thank you.
Question:	Do it have out put on it
Answer:	I just fnished answering a similar question on the GL502VS and during that research, I found this product continually pooping up as being compatible.This will work fine and run at 2400MHz,The total you can put in is 64GB
Question:	what are the dimemsion of this unit orion has some rare information
Answer:	This RAM is compatible with new iMac 2017, but it is not compatible well with Apple original RAM, if you want to upgrade RAM to 40GB by add 2 x 16GB RAM, it will make all RAM speed down to 2133MHz. If you intend to only use this RAM alone, not mix with Apple original RAM, you can buy this RAM and it is compatible with the new iMac 5K 2017. Also, my Apple original RAMs were in DIMM0 slots, system couldn't boot when I simply install Kingston RAMs to DIMM1 slots, so I swap Apple original RAMs to DIMM1 slots and Kingston RAMs to DIMM0 position, it now can boot successfully. Hope this answer helps.