2 best mosfet amplified with remote subwoofers

A MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor) amplifier can be used to power remote subwoofers in car audio systems. MOSFET amplifiers are commonly used in car audio setups due to their efficiency and reliability.

Here's how a MOSFET amplifier can be used with remote subwoofers in a car audio system:

MOSFET Amplifiers: MOSFET amplifiers are a type of transistor amplifier that use Metal-Oxide-Semiconductor Field-Effect Transistors to control the flow of current between the source and the drain terminals. They are popular in car audio systems because of their ability to provide high-quality audio output with minimal power loss.
Mono Amplifiers: When it comes to driving subwoofers, mono amplifiers are commonly used. These amplifiers are designed to produce a single-channel (mono) audio output, which is ideal for powering subwoofers that typically require low-frequency signals. Mono amplifiers are capable of delivering the power needed to produce deep bass tones.
Remote Subwoofers: Remote subwoofers, in the context of car audio, typically refer to subwoofers that are placed in a separate enclosure or location within the vehicle. These subwoofers are often used to enhance the low-frequency response of the audio system and are controlled separately from the main speakers.They are especially popular in car audio installations where space constraints or aesthetic considerations dictate their placement.
Wiring and Integration: To use a MOSFET amplifier with remote subwoofers, you'll need to wire the amplifier to the subwoofer(s). This typically involves connecting the amplifier's output to the input of the subwoofer enclosure or subwoofers themselves. Additionally, you may need to connect a remote bass control knob to the amplifier to adjust the subwoofer's output level on the fly.
Tuning and Adjustments: Tuning the amplifier is essential to ensure that the subwoofers produce the desired bass response. This involves adjusting settings like gain, crossover frequency, and phase to match the rest of the car audio system and your preferences.
Power Requirements: MOSFET amplifiers can vary in power output, so it's crucial to choose an amplifier that can provide enough power to drive your remote subwoofers effectively. Ensure that the amplifier's RMS (root mean square) power rating matches the subwoofers' specifications for optimal performance.
Protection and Safety: It's important to install the amplifier and subwoofers properly to prevent overheating and damage. Adequate ventilation and securing all wiring connections are crucial for safety and longevity.

In summary, MOSFET amplifiers are a popular choice for powering remote subwoofers in car audio systems. Mono amplifiers are specifically designed for subwoofer applications, and proper installation, wiring, and tuning are essential to achieve the best audio performance from your car audio setup.

Below you can find our editor's choice of the best mosfet amplified with remote subwoofers on the market

BOSS Audio Systems R3002 - Riot 600 Watt, 2 Channel, 2 4 Ohm Stable Class AB, Full Range, Bridgeable, Mosfet Car Amplifier with Remote Subwoofer Control

BOSS Audio Systems

Based on 3 reviews Check latest price

Product description

Drive your in-vehicle audio experience up a level with the Boss Audio Riot R3002 Class A/B 2-Channel Full Range Amplifier. This 2-Ohm stable amplifier features 600 Watts Max Power with a MOSFET power supply to pump out your playlists. Customize the sound with Fixed High Pass Crossover, Variable Low Pass Crossover and Bass Boost. Control those Bass vibes with the Remote Subwoofer Control. Bridge channels for more power and flexibility. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add Bass, enhanced sound and performance to their system at an affordable price. Get your vehicle rocking with the Boss Audio R3002. For further product details, please scroll down.

300 W MAX Power @ 2 Ohm x 2 Channels
150 W MAX Power @ 4 Ohm x 2 Channels
600 W MAX Bridged Power @ 4 Ohm x 1 Channels
Full-Range, Class A / B Topology, MOSFET Power Supply
Low and High Level Inputs, Variable Filter, Variable Bass Boost
Remote Subwoofer Control
Dimensions: Depth 9.2” x Width 10.4” x Height 2.3”
6 Year Platinum Online Dealer Warranty

User questions & answers

Question:	will this amp power 2 6x9 500 watt door speakers and 2 rear pillar speakers
Answer:	It takes anywhere from 10 to 15 seconds depending on the object and temperature you are measuring.
Question:	Can you support two 10" subs with this one amp
Answer:	It can be used under the broiler or in any cooking mode, but it must be inserted into the center of the cut of meat you are preparing.
Question:	Can you hook 4 speakers and a sub to this amp? Or just 4 speakers and I'd need a separate one for the sub? Thanks in advance
Answer:	No hotter than you can stand to be around. It's plastic... to much heat and it melts!
Question:	whats rhe size of the amplifier
Answer:	Maybe two feet or more. Probe is in the oven and thermometer sits on counter.

Product features

Plenty of Power

Boost your in-vehicle audio experience with the Boss Audio Riot R3002 Class A/B 2-Channel Full Range Amplifier. With 600 Watts Max Power and MOSFET power supply, you get clean, high quality sound. This 2-Channel Amplifier can power a pair of speakers or two subwoofers @4-Ohms or two pairs of speakers or four subwoofers @2-Ohms. Customize the sound with Fixed High Pass Crossover, Variable Low Pass Crossover, Bass Boost and Remote Subwoofer Control. Bridge channels for more power and flexibility. Amplifiers in the Riot Series are perfect for first time car audio buyers looking to add bass, enhanced sound and performance to their system at an affordable price.

MOSFET and Class A/B

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

Bridgeable and 2 Ohm Stable

Combine the channels of a 2 or 4 channel amplifier to provide a dramatic increase in power output.

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

Variable Low Pass Filter and Fixed High Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Fixed high-pass filter gives you the ability to filter the frequencies that pass through to the full range speakers from a fixed frequency point.

Subwoofer Level Control and Bass Boost

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

High and Low Level Inputs

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.

Illuminated BOSS Logo

The BOSS Logo is backlit in a cool blue on this Riot Series Amplifier.

Sound Storm EVO1500.1 EVO 1500 Watt, 2 Ohm Stable Class A/B, Monoblock, MOSFET Car Amplifier with Remote Subwoofer Control

Sound Storm Laboratories

Based on 282 reviews Check latest price

Product description

Enjoy the sonic power of the Sound Storm EVO1500.1 Monoblock Class A/B Amplifier. This 2-Ohm stable Amplifier features 1500 Watts Max Power with a MOSFET power supply to rock your audio system. Customize the sound with Variable Low Pass Crossover and Bass Boost. Crank up the Bass with the Remote Subwoofer Control. The EVO Series offers visually and sonically stunning Amplifiers built to deliver outstanding performance and immense power for incredible fidelity and flexibility. Shift audio gears with the Sound Storm EVO1500.1 For further product details, please scroll down.

1500 W MAX Power @ 2 Ohm x 1 Channel
750 W MAX Power @ 4 Ohm x 1 Channel
High and Low Level Inputs
Variable Low Pass Crossover, Variable Bass Boost
Remote Subwoofer Control
Dimensions: Depth 9.7” x Width 10” x Height 2.3”
6 Year Platinum Online Dealer Warranty

User questions & answers

Question:	Will this amp push 2 15 kicker cvx
Answer:	The short answer is no they don't tip over when nothing is in them; however, the 1/4 and 1/3 cup are a little more unstable, and if pushed could kind of fall back on the handle and rest there.
Question:	Can this amp use as a mid range amp
Answer:	The dial is about 1.75" in diameter. If you are worried about the size, Escali recommends a thermometer with a smaller dial such as the AH2.
Question:	in 2 ohms, how much rms does this amp (woofers
Answer:	This thermometer does not require a battery for use.
Question:	Can it ran 15teens
Answer:	This thermometer is safe to use for candy making though it is not its recommended use. This thermometer can read temperatures up to 220 degrees F. Most candy specific thermometers read up to 500 degrees. Escali offers a line of thermometers designed for candy making. The most popular thermometers are the AHC1 and AHC3.

Product features

Clear Sound

Ramp up your music experience with the Sound Storm EVO1500.1 Monoblock Class A/B Amplifier. With 1500 Watts Max Power and MOSFET power supply, this amplifier provides strong bass every time. Customize the sound with Variable Low Pass Crossover, Bass Boost and Remote Subwoofer Control. The EVO Series offers visually and sonically stunning amplifiers built to deliver outstanding performance and immense power for incredible fidelity and flexibility.

MOSFET and Class A/B

Metal Oxide Semiconductor Field-Effect Transistors quickly switch from full to non-conduction for high efficiency output.

Our Class-A/B amplifiers feature specific linear circuitry that increases sound quality and power output while reducing distortion and improving efficiency.

2 Ohm Stable and High and Low Level Inputs

2-Ohm stable comfortably powers speakers or subwoofers when in use at 2-Ohms, resulting in more power and volume.

High-level inputs accept speaker output signals and low-level inputs accept pre-amp output signals to allow for the addition of amps and processors to standard factory or aftermarket source units.

Variable Low Pass Filter

Variable low-pass filter gives you control over the frequencies that pass through to the subwoofer.

Bass Boost

Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.

Subwoofer Level Control

A wired remote lets you easily control the subwoofer level for customized output and superior sound.

Short Protection

Automatic shut-off protects the amplifier if it gets too hot or if speakers fail causing a short.

Switchable Input Sensitivity

Switchable input sensitivity provides adjustable control over the input signal from the head unit to achieve customized balance between power and sound quality.

Variable Input Control

The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly.