10 best gimbal head for tripods

Product description

Note: camera and tripod are not included



For camera with telephoto zoom lens, You need to buy a tripod mount ring additionally for it to work properly and for better balance.



Description:



The neewer Gimbal Head can hold up cameras weighing over 30lbs/13.6 kg, making it perfect for any photography using large telephoto lenses. Separate locks control the 360¡ã panning base and swinging arm, allowing a full range of motion ideal for covering sporting events, catching birds in flight, or any other fast moving subjects.



Large knob with Bubble Level are easy to operate, and numbered scales along the panning base and the vertical arm allow you to easily repeat your setup for various lens and camera combinations. The panning base and vertical arm capable of 360 degree rotation (horizontal and vertical)£¬can meet the photography demand of different Angle. Additionally, the lens platform can be adjusted up or down to accommodate different camera set ups.



Specifications:



Material: Aluminum alloy



Height: 220mm



Base diameter: 47mm



Maximum Load: 30lbs/13.6 kg



Screw: 1/4" suitable for most cameras



Quick release plate: Arca Swiss standard compatible



Package Contents:



1 x Gimbal tripod head

• Rugged design and construction, smooth, fast tracking horizontally and vertically
• Horizontal adjustment of the lens platform allows precise positioning to find the center of gravity of any size lens and camera system
• Calibrated scale for repeatable positioning of lenses
• The panning base and vertical arm capable of 360 degree rotation(horizontal and vertical),can meet the photography demand of different Angle.
• Includes Arca-Swiss type standard 1/4'' quick release plate and Bubble Level. Non-Skid slip design on Arca-Swiss standard quick release plate

User questions & answers

Question:	Does this head allow you to place the camera in portrait mode as well? None of the product pictures show the camera in portrait mode
Answer:	I'm sure it will. I mounted my T6i on it.
Question:	could this gimbal fit on 1/4" tripod instead of 3/8"? Do you need to buy an adaptor such as 3/8"-16 to 1/4"-20Convert Screw
Answer:	There is no zhiyun g6 max, i only know Feiyu Tech G6 max, this weebill s is thicker but small size compare the length
Question:	Can you adjust the camera position forwards/backwards on this to compensate for parralax for panoramas
Answer:	The compatibility chart says it works for Nikon D850 which is heavier and a bit more bulkier. I think in term of strength yes. I’m not sure about software as the oldest model on the list is a 2017 model. Here’s the compatibility chart: https://oss.zhiyun-tech.com/zyplay/instructions_edit/supportmodel/WEEBILL-S-Camera-Compatibility-List.pdf
Question:	Do the knobs regulate the stiffness? Do they truly lock a position? I mean: if I aimed my optics up towards zenith, could the knobs lock it in place
Answer:	Yes, Sony a6600 can work on Weebill S, but it do not support some functional control of A6500 due to Sony do not open agreement

Product features

Neewer Professional Heavy Duty Metal 360° Panoramic Gimbal Tripod Head with Arca-Swiss Standard 1/4'' QR Plate and Bubble Level

• Heavy Duty Aluminum Alloy: It can support 30lbs/13.6 kg, making it perfect for any photography using large telephoto lenses.
• The panning base and vertical arm capable of 360° rotation (horizontal and vertical) to meet the photography demand of different Angle
• Large knob with Bubble Level are easy to operate, and numbered scales along the panning base and the vertical arm allow you to easily repeat your setup for various lens and camera combinations.

Product description

About the Wimberley Gimbal Head II



The Wimberley Head is a specialized gimbal tripod head for telephoto lenses. Its gimbal head type design allows you to easily support and manipulate very large lenses for tracking birds and animals. Since its introduction in 1991, the Wimberley Head has become the industry standard for serious nature photographers.



The Wimberley Head Version II offers the same stiffness, capacity, and fluid movement of the old version in a more compact and lightweight package. The head’s redesigned panning base has zero play, and the pan locking knob has been moved to the side of the head, thus allowing the user to easily operate both knobs with the same hand. New lobed “soft-touch” knobs provide a more comfortable grip and perform better when using gloves.



In addition to the above improvements, Wimberley has examined all aspects of the head, tightening tolerances, improving friction materials and so forth. Our goal has been to make this head functionally and aesthetically better in every way than the old version and competing products.



What's Included



WH-200 Gimbal Head with platform QR clamp (WH-200)

10 Year Warranty on all products from Wimberley



This product is protected by one or more of the following Patents: #7478970 & #7600941

• Gimbal-type design allows you to rotate your lens around its center of gravity and thus easily manipulate very large lenses
• Rugged design offers stiffness, capacity and smooth pan and tilt movement in a compact and lightweight package
• Arca Swiss style clamp supports a variety of medium and telephoto lenses
• Anodized 6061 Aluminum Clamp, Powder coated Aluminum upright, Stainless Steel Fasteners
• Made in USA. Assembled in Charlottesville, Virginia

User questions & answers

Question:	I am very interesting in WH-200, but want to know where was it manufactured
Answer:	Yes they work
Question:	Will this work with a gitzo 3542ls to support a nikon
Answer:	it is compatible with FTZ adapter for Z6/7. I use it on Z6 with FTZ adapter and F-mount lenses.
Question:	Will this Gimbal head fit onto a 3 Legged Thing winston
Answer:	?? I'm using them on Nikon D 7500 and it does work. Googling that sku came up with these rings so I guess they are... https://neewer.com/products/lenses-filters-10037281
Question:	Why would I want to pay $595 for this item when I see other gimbal heads in the $200 range that look just as heavy and structurally sound
Answer:	Can't answer that. Didn't work on my d5300, so I returned them.
Question:	Will these cameras work with the lorex 4k nvr9082 2tb nvr
Answer:	Yes, you can still control the Aperture. They have the pins on it to interact with the lens and camera body for aperture, shutter, and iso.
Question:	Will this work with any 1080p DVR
Answer:	I always manual focus but remember you have to be very close to the subject. It does take some getting used to but wort the effort!
Question:	will this camera worh with samsung wisenet dvr
Answer:	I have the t6 and they work on that. Not sure about the t7.
Question:	Will these cameras work with the lorex 4k nvr9082 2tb nvr
Answer:	It should work with any canon mount

• 1.INSEESI IN-22 gimbal tripod head is designed for heavy cameras and and camcorders,manipulate telephoto lenses,especially large lenses.
• 2.Max upload weight up to 10kg/22Lb, shipping size:8.8 x 7.3 x 3.2 inches,shipping weight :3.1 pounds.
• 3.Easy to balance the lens and smooth enough to follow action,Easy to Vertical balance adjustment lever with a built-in compass
• 4.Built with standard 1/4"Screw and 360 Degree Quick Release Plate,compatible for most Canon,Nikon,Pentax.
• 5.Horizontal adjustment of the lens platform allows precise positioning to find the center of gravity of any size lens and camera.

User questions & answers

Question:	This is the chinese knockoff of the wembley ( made in usa) gimbal head right
Answer:	I sent mine back as they got stuck on my camera. When I did have it on my camera it didn't work well.
Question:	Is this workable on a monopod
Answer:	/Duration -:-Loaded: 0%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:00 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } I hope you have your auto focus on! When taking pictures with extension rings one should bear in mind that just adding the rings does not do the trick. This is because the extension rings change all the focus parameters and the camera/lens may very well be unable to focus as the focus point falls outside the focus ran… see more I hope you have your auto focus on! When taking pictures with extension rings one should bear in mind that just adding the rings does not do the trick. This is because the extension rings change all the focus parameters and the camera/lens may very well be unable to focus as the focus point falls outside the focus range of the camera/lens. For the camera to be able to focus manually/automatically you need to be almost in focus. For example if you frame a tree and focus it, and then you add an extension ring, the image of the tree will become blurred and you will most likely not be able to focus it again unless you get closer to the tree. (or remove the extension ring) I have included a brief video showing how one needs to get closer to the object if one wishes to focus with extension rings. Hope it is helpful Mench see less I hope you have your auto focus on! When taking pictures with extension rings one should bear in mind that just adding the rings does not do the trick. This is because the extension rings change all the focus parameters and the camera/lens may very well be unable to focus as the focus point falls outside the focus range of the camera/lens. For the camera to be able to focus manually/automatically you need to be almost in focus. For example if you frame a tree and focus it, and then you add an extension ring, the image of the tree will become blurred and you will most likely not be able to focus it again unless you get closer to the tree. (or remove the extension ring) I have included a brief video showing how one needs to get closer to the object if one wishes to focus with extension rings. Hope it is helpful Mench
Question:	is this a stabilizer
Answer:	Yes.They work with all D series Nikons.
Question:	How easy is this to add to my current tripod? I have a Geekoto and it's a good one but worry about the weight of both together
Answer:	I haven’t had any problems with mine yet!

Product description

Note: camera and tripod are not included.

For the camera with a telephoto zoom lens, you need to buy a tripod mount ring additionally for it to work properly and for better balance.

Description:

The neewer Gimbal Head can hold up cameras weighing over 33lbs/15kg, making it perfect for any photography using large telephoto lenses. CNC rails allow for smooth movement, 100mm movable horizontal axis allows precise positioning to find the center of gravity of any size lens and camera system, allowing a full range of motion ideal for covering sporting events, catching birds in flight, or any other fast-moving subjects.

A large knob with Bubble Level is easy to operate, and numbered scales along the panning base and the vertical arm allow you to easily repeat your setup for various lens and camera combinations. The panning base and vertical arm capable of 360-degree rotation (horizontal and vertical) can meet the photography demand of different angles. Additionally, the lens platform can be adjusted up or down to accommodate different camera setups.

Specifications:

Material: Aluminum alloy

Height: 23cm/9.06in

Horizontal Axis Length: 10cm/3.9in

Base Diameter: 5cm/1.97in

Product Weight: 2.76lbs/1.25Kg

Maximum Load: 33lbs/15kg

Product Dimensions: 23 x 20 x 9cm / 9.06 x 7.88 x 3.55in

Screw: 1/4inches suitable for most cameras

Tripod Connection: 3/8 inches

Package Contents:

1 x Gimbal Tripod Head

• Innovative Design: CNC rails allow for smooth movement,100mm movable horizontal axis allows precise positioning to find the center of gravity of any size lens and camera system
• Wide Compatibility: The Gimbal Tripod Head bottom is 3/8 inches screw holes, which can be widely applied to various professional tripods. Removable QR plate comes with 1/4 inches screw suitable for DSLR cameras
• 360° Panoramic Head: The panning base and vertical arm are capable of 360-degree rotation (horizontal and vertical), can meet the photography demand of different angles
• Non-skid Design: Includes a standard 1/4inches QR plate and Bubble Level. Non-Skid slip design on the standard QR plate
• Anti-Oxidation Treatment: The premium Gimbal Tripod Head is made of Aluminium alloy, CNC precision machining, and surface adopts anode anti-oxidation treatment. Strong metal construction yet. Ideal for panoramic photography and close-up photography

User questions & answers

Question:	When ordering this gimbal head. can i get a second 1/4 qr plate, for my second camera
Answer:	Snaps on/off just fine. Pins are properly sprung, and the mount clicks in solidly. Little to no play, just like a native lens.
Question:	I have an ambico tripod with the quick connect shoe that screws to camera bottom. can i still use this? no way to take the original tripod head off
Answer:	Well I have a a7 w and with my experience not all third party extra work in auto mode... but personally I expect that so I no going n I most likely not have maybe auto focus or auto exposure but keep n mind when you are on a tripod and taking a macro... r u n a hurry ? Probably not so just use them as a tool to get your close up ... I’m sure it’s like that with all models unless u by close up rings from Sony but I don’t think that is there objective to create auto close up extension tubes... so I just go in knowing I will use Manuel for focus n exposure Good luck n thanks for asking Kwpstudio.com
Question:	Is this a fluid filled gimbal head
Answer:	These are extension tubes that are placed between your lens and your a6000. Every lens has a minimum focus distance... for example, a lens might focus at 10 feet but at any distances less than 10 feet it will not focus. If you add this or both of these extension tubes between your lens and camera body, you will be able to focus at distances less than that minimum focus distance. The trade-off is that you lose the ability to focus at the other end of the focus distance... no infinity focus and no focus at longer distances. This is for close-ups of insects, leaves, flowers, etc, where you are at a working distance of only inches.
Question:	How does this model compare with the almost indentical priced Neewer model with the round tube
Answer:	Yes. I used it a lot with a D3200 and the connection is exactly the same.

Product features

Neewer Professional Metal Gimbal Tripod Head 360°Panoramic Head

Neewer Professional Metal Gimbal Tripod Head 360°Panoramic Head

Note: camera and tripod are not included.

The neewer Gimbal Head can hold up cameras weighing over 33lbs/15kg, making it perfect for any photography using large telephoto lenses. CNC rails allow for smooth movement, 100mm movable horizontal axis allows precise positioning to find the center of gravity of any size lens and camera system, allowing a full range of motion ideal for covering sporting events, catching birds in flight, or any other fast moving subjects.

Details

Applications

User questions & answers

Question:	I want to use this with a sony a7iii and a sony 200-600mm lens. it will not balance with the included plate. how long of a plate do i need
Answer:	It works on my a6000 so it should, technically, work on the a6400 or other E-mount cameras, as well.

Product features

SIRUI PH-10 Gimbal Head-Little Body, Heavy Duty

SIRUI PH-10 Carbon Fiber Gimbal Head

Specifications: Brand: SIRUI Material: 10-layer Carbon Fiber Max. Load: 15kg / 33lbs Product Weight: 0.98Kg / 2.16lbs Max Loading: 15Kg / 33lbs Accessory Screws: 1/4", 3/8" Screw Port: 3/8" Size: 208 x 172 x 70mm / 8.19 x 6.77 x 2.76 inches (Height x Length x Width)

High Stability with 10-Layer Carbon FIber

10-Layer high strength, 0.98KG lightweight, supports up to a 15kg/33lbs load, ideal for bird watching, sports photography, telescope and other outdoor scenarios.

Ultra-Smooth and Steady

Quality built with ergonomically structure, the gimbal head smoothly moves even when attached with a large heavy camera lens and counter balance your camera and lens as you turn the head.

Advanced Locking System

Easily attach a compatible photo/video equipment to the quick release plate and slide the platform with precision scale marks up or down to vary shooting height and your sights. Manually adjust position setting with the four independent locking knobs for track, base, sliding platform and quick release plate controls.

Product description

The Benro GH2 Gimbal Head is a specialized tripod head designed for photographers who want comfort, stability and smooth control with their heavier zoom lenses. This is something that you just can’t get with the standard ball head. The GH2 allows you to rotate your lens around its center of gravity enabling easy manipulation of large lenses up to 600mm. If its sport or wildlife photography, maneuverability and speed are two very important factors which the Benro GH2 supports, allowing photographers to capture those all important unpredictable moments. It comes with a QR plate which can be quickly removed by turning the knob on the side. The lens is set flat when using the GH-2, whereas a lens attached to the GH-1 is in an upright position. The GH2 is compatible with the international-style QR plates such as the Arca Swiss and the Benro PL Series special lens plates.

• Designed for extreme tilt angles and effortless balanced shots with or without utilizing the oversized locking knob.
• Compatible with the universal Arca-Swiss QR system, the newly designed safety lock ensure great security for your equipment.
• Features a specialized clamp for quick attachment/release of your camera.
• Stands at 9.5", weighs in at 3 lbs. and can hold up to 50 lbs.
• Limited 3-Year Warranty (Extended to 5-Years with Online Registration).

User questions & answers

Question:	Does the gh2 come with the pl100 plate as shown in the photo
Answer:	Yes. This lens work with iPhone 7/8/x/xr/11 perfectly.
Question:	What is the diameter of the base plate where it attaches to a tripod
Answer:	The small black cylinder is the fish eye lens. This set consists of three lenses, and a spring-loaded clip to hold hold the chosen lens(es) against the smartphone's camera.
Question:	Do tilting the knobs give variable tightness? The current gimbal head I have is either locked or unlocked. When it's unlocked there any jiggle play
Answer:	It depends on which seller you choose. After purchase we found out that the seller we bought from is a gray market, however they did give us a one year warranty and have facilitated in a repair after the aperture blades got stuck during normal use. Hope that helps.
Question:	I see that it has 360 panning ability, and it swings front to back, but how do you adjust the horizon? Do you have to adjust you tri-pod legs
Answer:	So far I use it this lens to Nikon 810 and Nikon 800 works great for both models.

Product description

Balance and maneuver large telephoto lenses effortlessly with the Oben GH-30 Gimbal Head. An ideal support for sports and wildlife photographers, this head is capable of handling a 44 lb payload and allows fluid movement on both vertical and horizontal axes. Because of the head's independent pan lock and 360° range of movement, it allows you to capture fast-moving objects.

General:



Head Type: Gimbal Head



Base Mount: 3/8"-16 Thread



Camera Mounting Screw: 1/4"-20 Male & 3/8"-16 with Bushing



Quick Release Plate Type: Arca-Type



Load Capacity: 44 lb / 19.96 kg



Number of Bubble Level(s): None



Friction Control: Yes



Independent Pan Lock: Yes



Material: Aluminum



Pan & Tilt Range:



Panning Range: 360°



Physical:



Dimensions: H: 9.0 x W: 9.3" / H: 22.9 x W: 23.6 cm



Weight: 3.2 lb / 1.45 kg

• Load Capacity: 44 lb * Height: 9" * Weight: 3.2 lb
• Arca-Type Compatible * 360° Pan with Independent Lock * Ideal for Sports or Wildlife Photography
• Balance and Maneuver Large Tele Lenses * 3/8"-16 Tripod Mounting Socket * Plate with Two 1/4"-20 Mounts & Bushings
• Numbered Scales for Repeated Set Up

User questions & answers

Question:	Can I remove one screw from the plate if I want
Answer:	No, this lens is for Canon RF Mounts only
Question:	That does not look like a quick release plate... What gives
Answer:	It does not have IS built into the lens but you can use your R series camera's in body image stabilization. Also, longer focal length lenses need IS more than an ultra wide angle lens like the 14mm.
Question:	Does it have fluid movement
Answer:	Yes, it works with iPhone X.
Question:	How do you mount the plate to a sigma 600mm lens
Answer:	Yes. It works with Google Pixel 3a.

Product description

The MOVO GH800 MKII Gimbal Head can hold up cameras weighing over 30 lbs, making it perfect for any photography using large telephoto lenses. Separate locks control the 360° panning base and swinging arm, allowing a full range of motion ideal for covering sporting events, catching birds in flight, or any other fast moving subjects.



The "gravity-balanced" gimbal head makes even the bulkiest camera and lens combos seem almost weightless. The Arca-Swiss-compatible quick-release plate (included) is 120 mm long, providing ample support of most telephoto lenses. For extreme telephoto lenses longer base plates can be easily substituted.



Large, lobed knobs are easy to operate even through gloves or in dark conditions, and numbered scales along the panning base and the vertical arm allow you to easily repeat your setup for various lens and camera combinations. The panning base and vertical arm capable of 360 degree rotation (horizontal and vertical). Additionally, the lens platform can be adjusted up or down by 4" to better accommodate different camera set ups.



Specifications:

Dimensions: 10" x 5.9" x 9.1" (25.3 x 15 x 23.2cm)

Weight: 2.75 LBS (1.25KG)

Max Camera Weight: 33 LBS (15KG)

• FLUID PANNING & TILTING - Precision bearings make capturing a moving subject a breeze - Ideal for wildlife photography, birding, & other outdoor uses
• SMOOTH "WEIGHTLESS" FLOW - Arca clamp & plate are horizontally & vertically adjustable to balance almost any camera & telephoto lens combination
• HEAVY DUTY CONSTRUCTION - Superior carbon-fiber build easily supports up to 30 lbs (13.6kg), while gimbal head itself is relatively light at 2.75 lbs
• EXCELLENT VALUE - Whether you're a hobbyist or pro this DSLR gimbal head is a wise quality investment
• WARRANTY - 1 Year Movo Warranty with Fast & Friendly Support Based in the U.S.A.

User questions & answers

Question:	Will this work with a manfrotto mk294 tripod
Answer:	No. It is designed specifically for Canon R series mirrorless cameras which us a RF mount. The Rokinon FE14M-C 14mm F2.8 Ultra Wide Lens for Canon (Black) is the same basic lens but is designed in a Canon EF mount to fit directly onto your t7i / 800d and any Canon DSLR EF mount camera. ROKINON Full Frame lenses will work great on crop sensor cameras with the advantage of you able to still use them if you move up to a Full Frame sensor camera. On your T7i it will yield a view equivalent to approximately a 22mm lens on a Full Frame Camera.
Question:	What are the differences between mark i vs mark ii
Answer:	Lighter and I prefer a native mount. I have both the EF and the RF version of this lens and they are both fantastic!

Product description

How to use:

● Vertical balance adjustment lever with a built-in compass

The clamp with quick release of this gimbal head could be moved up or down through adjusting the vertical balance adjustment lever. Adjust the up or down displacement by locking the vertical balance adjustment lever in counter-clockwise direction while tighten the lock knob in clockwise direction is to fix the displacement.

●Tilt knob

When the mounting plate lock lever is locked, the quick release system could be adjustable for 360° by loosen the upper pivot bearing lock knob in counter-clockwise direction. Lock the quick release system by locking the tilt knob in clockwise direction.

● Horizontal balance adjustment lever

The base mount could be rotate 360°by loosening the panning lock knob in counter-clockwise direction. While locking the base mount by locking the panning lock knob is clockwise direction. 

Specifications: 

Material: Aluminium Alloy 

Lock hole: 3/8" 

Camera screw: 1/4" 

Quick Release Plate size : 70*38*10mm 

Dimension: 240*200*90mm

Base diameter: 45mm 

Max. load: 12kg 

Net weight: 1.2KG

Packing list:

1 X Q45 Gimbal Head with quick release plate

(Camera/Video/Tripod NOT included)

• The use of high-strength aluminum grade build, hard anodized surface, wear anti-scratch, texture and beautiful.
• Panoramic gimbal head, 360 degree panoramic capture, adjust freely, help you save catch every moment, realize the most beautiful.
• With one bubble level for angles adjustment . International universal quick-release plate, comes with 1/4 "screw, suitable for all SLR cameras. 3/8" screw on base for tripod
• Easy to manipulate telephoto lenses,especially large lenses: It can help you to rotate your telephoto lens easily and keep the focus of the entire unit so that you can choose the best angle you like without worrying about the heavy lenses and the stability.

User questions & answers

Question:	Does this use the arca style clamp system
Answer:	the A6000 is designed to take e-mount lenses. It is an e-mount camera.
Question:	Does the gimbal have enough clearance for a large lens like the Sigma 150-600 sport
Answer:	That is certainly NOT the length of the lens. It is almost certainly the minimum focus distance. I have this lens for Micro 4/3, which means mine might be slightly different length than yours, but only slightly. Mine is about 3.25 inches long. WIth the lens caps on, from back of the rear cap to front of the front lens cap is about 3.5 inches. The lens shade is 2 and 1/8 inches deep, so when it's on it adds about 2 inches to the length. By the way, the MFT version shortest focal length is 0.9 meters.
Question:	Can you make a adjustments to make the arm swing or turn loosely
Answer:	It does include a lens hood
Question:	can you purchase the quick release plate locking knob separate?, it comes loose and I lost mine
Answer:	With mirror lenses you have one and only one aperture. In this case it's f/6.3. At 300mm, f/6.3 is going to be a relatively shallow depth of field, and the "hyperfocal" setting won't be very deep. In other words, there's very little margin for focusing error.

Product description

Essential for long heavy lenses the GH5C Carbon Fiber Gimbal Head from Benro supports up to 66.0 lb (30.0 kg) and weighs only 2.4 lb (1.1 kg). The GH5C gimbal is ideal for live sports photography wildlife photography and bird watching. The camera plate clamp is Arca-Swiss compatible and allows for quick attachment and release of your camera and lens. The blue anodized aluminum PL100LW lightweight camera plate has been machined to reduce as much mass as possible. A vertical scale and a 360 panoramic scale allow for easy adjustments and repeatable pans while a large pivot tension knob enables smooth tilts. A separate knob locks the panning motion for more complete adjustment control.

User questions & answers

Question:	I bought this and returned it as the plate it came with wouldn't properly hold my Sigma 150-600mm lens. Any suggestions
Answer:	No
Question:	Do I just need tripod legs for this? No ball head right
Answer:	With the Nikon adapter for f series lenses yes.
Question:	Has anyone used this successfully with a platform spider tripod? The female screw coupling is recessed so it won't make a secure fit on mine
Answer:	No
Question:	What is the best tripod to use with this product? I would be using a Nikon d7200 with a Sigma 150-600mm lens
Answer:	Manual