11 best tripod monopod with ball heads

• HIGH STABILITY: Low-profile ball head design create stronger locking force and higher stability. Screw knob is located on the side of the ball instead of the bottom of the ball head bring 15% down the whole center of the gravity of the Ball Head, enhance stability
• WIDE COMPATIBILITY: Equipped with 1/4 screw, the removable quick release plate is suitable for all SLR cameras. 3/8 screw hole at the bottom can be attached to tripod or monopod
• FREE ROTATION BALL HEAD: Screw knob can quickly tighten or loosen the ball and allows it to move freely in all directions
• SMALL AND PRRTABLE: Height only 68mm/ 2.68inches, Weight only 197g/ 0.43lbs, easy to carry
• STURDY AND DURABLE: Max Load up to 10 kg/ 352.74 ounce, made of aluminium alloy material, it is very strong and durable

User questions & answers

Question:	Is this Arco Swiss compatible
Answer:	The Denon AVR X4300H is the same form factor and a replacement for the 3313ci and the X4000. I have both the 3313ci and also the X4000. This fits like a glove exactly on top with no overhang. It is also totally silent, I have it in smart mode. Where before I was measuring 103F watching a 5.1 movie, I have it set to 82 degrees and it'd been keeping the receiver within 2 degrees of that set point. One great way to extend the life of expensive electronics.
Question:	What is the capacity/load for this
Answer:	Hi Aah924!Thank you for your inquiry.This may potentially be the option that you are needing, but depending on how your cabinet is configured, that would be the determining indicator on which unit would be more useful for your application.The AIRCOM T9 is primarily used in applications where the top would have openings to allow warm air to be exhausted. Quite a bit of modern cabinets tend to be designed around this design.The AIRCOM T8 is primarily used in applications where the rear of the enclosure would be exposed. This allows the air to be immediately re-directed out of that specified range. We refer to this as the "book shelf" styled layouts (due to it resembling the library book shelves).We greatly appreciate your interest and consideration in regards to our cooling products!Warm Regards,Tommy KaragiasAC Infinity
Question:	Is this 501 PL compatible
Answer:	Hi Tony! Thank you for taking the time to reach out to me with your question! The AIRCOM T9 does not come with "rack ears". These are however readily available through Amazon and other websites. I have included a link to the Amazon page specializing in these products (see below). https://www.amazon.com/Premium-Rack-Mounting-Ears-Screws/dp/B01JWJYY24 Thank you and have a wonderful day! Andrew Avila AC Infinity
Question:	Is this Arco Swiss compatible
Answer:	From my research all you need is a 1/2" of clearance from the top. It work's superbly and love it. Keeps my flagship reciever 20-30 degrees cooler. Hope this helps.

Product features

Neewer Low-Profile Ball Head 360 Degree Rotatable Tripod Head for DSLR Cameras Tripods Monopods

NOTE:Please use the low-profile ball head within its maximum bearing weight

NOTE: Tighten all knobs when using the low-profile ball head

• The prefect low-profile ball head design create stronger locking force and higher stability. The screw knob is located on the side of the ball instead of the bottom of the ball head bring 15% down the whole center of the gravity of the ball head that can enhance stability
• The removable quick release plate is Equipped with 1/4 screw that is suitable for all SLR cameras and 3/8 screw hole at the bottom can be attached to tripod. or monopods.
• Screw knob can quickly tighten or loosen the ball and allows it to move freely in all directions
• The height of the ball head is 68mm/ 2.68inches and its weight is only 197g/ 0.43lbs. It is very easy to carry.
• The max load of the ball head can up to 10 kg/ 352.74 ounce and the aluminium alloy material makes it strong and durable.

Product description

SmallRig Ball Head Mount 2796 is designed to hold small DSLRs, mirrorless, and action cameras or other accessories that weigh up to 7.7 lb. The head features a 1/4"-20 male thread on top and 1/4"-20 female thread on the bottom. The ball head is capable of 360° panning and 130° tilting for nearly unrestricted movement. The locking knob is an anti-off design that controls the angle movements. Besides, the top of the head features a rubber pad on top to prevent your rigs from scratching. Optional Cold Shoe Mount 2797 is separately available if you want to mount a microphone or lights to the top of the head.



Key Features:

1.Mounts Cameras, Smartphones and other Rigs to Tripod

2.1/4"-20 Screw on Top & 1/4"-20 Thread on Bottom

3.130º Vertical Articulation, 360° Rotation

4.Aluminum-Constructed Head with Load Capacity 7.7 lb (3.5kg)

5.Adjustable Locking Knob with Anti-Off Design



Compatibility: 

Universal



Package Includes: 

1 x Ball Head



Specification：

Product Dimensions: 46.6 x 33.1 x 62.1mm

Package Dimensions: 78 x 66 x 42mm

Net Weight: 68g±5g

Package Weight: 88g±5g

Material(s): Aluminum Alloy、Silicon Rubber

• 【1/4" Wide Compatibility】1/4" thread hole at the bottom of the ball head and easy to install tripod, monopod, camera slider, and a mini tripod. With 1/4" screw on the top, for installing the camera, DV, mobile phone, telescope
• 【360 Degree Swivel Tripod Head】Ensure 130º Vertical Articulation, 360° Rotation for multi-angle adjustment including horizontal shooting and vertical shooting
• 【Aluminum Alloy Material】Made of aluminum alloy, the Max load is 7.7lbs/3.5 kg, Very strong, and durable. With rubber-padded mount on the top to protect your camera from potential scratches
• 【With Locking Knob】 Aiming and horizon leveling can be easily accomplished. You also can use the knob to adjust to the desired angle to meet your needs at different angles
• 【Light Weight & Portable】Ball head weight 68g, height 62mm, bottom diameter 33mm. Packing includes: 1 x 360-degree ball head

Product description

B collection magnesium ball heads are for photographers requiring more control, higher-level features and functionality. These triple action ball heads have individual controls for pan lock, drag and ball lock.

• Can hold up to 22 lb, stands at 3.9" high, and weighs in at 14.5 oz
• Features a large locking knob that enables control of the ball's motion and 360 Degree panning, and a separate knob that adjusts friction control.
• A numbered scale on the base of the ball head assists with accurate repeat pans, and a bubble helps ensure that the head is level to the horizon.
• A 90 Degree notch helps you to quickly switch your camera to portrait mode.
• Ideal for location shooting or for studio use.

User questions & answers

Question:	What is the difference between a 1B1 and B1 ball head
Answer:	Interesting question. If you keep the center of gravity mostly directly over top I suspect this to be a non issue. At 90 degrees I had a mirrorless camera with a 70-180 on it and it didn’t move. I’ve also mounted a tracker additional head and camera with no issues but I generally always try and keep center of gravity as close to directly over top as possible. I shoot mirrorless so that saves weight and I use an L bracket instead of tilting it 90 degrees.
Question:	Will a Wimberly Sidekick gimbal tripos head with arca swiss release plate work with this Benroe
Answer:	It should with no problems....Good luck!
Question:	does it come with a plate
Answer:	It feels a little more than 12 ounces however it's all metal. 👍🏻
Question:	What's the base diameter of the IB
Answer:	Yes it is! I have the same !

Product description

Easy to adjust the working height of tripod from 2. 76"" To 47. 2"" Instantly. quick release plate can be adjusted and screwed with the fixing screws for horizontal balance. package includes: camera tripod ball head carrying bag stainless steel spikes adjustment lever instruction manual

• Basic detail: model: am-225; color: Black; material: carbon fiber; weight: 1. 6lbs (tripod) + 0. 45lbs (ball head); max Load: 13. 2lbs
• Functional characteristics: easy adjustment: 5-section column legs with twist leg locks enables you to adjust the working height from 2. 76" To 47. 2" Instantly; loosen and remove the rubber feet, and replace them with the stainless steel spikes
• Material characteristics: The whole set weights only 2. 05 lbs. , So it is easy to carry and suitable for trip shoot or outdoor shooting; except for its lightweight and portability, there are other characteristics of excellent corrosion resistance, high temperature resistance, stability, flexibility and load capacity
• Excellent process: The mounting screw is interchangeable from 3/8" To 1/4"

User questions & answers

Question:	does the AM-223 version comes with the center column
Answer:	It does not.
Question:	Arca-swiss/ RRS compatible
Answer:	Yes. The head is Arca Swiss compatible. For light and moderate weights it works fine. For a DSLR with a big lens, it can work but that is pushing the limit of the head. I actually replaced the head immediately given my usual use cases. I wish they sold just the legs. I actually replaced the head with a more heavy duty head with a RRS quick release clamp to handle heavier loads. The legs are great. Rock solid. With the heavier duty head and an RRS clamp plate, this has become my favorite ‘always have a travel Tripod’ as I generally have in my bag at all times.
Question:	Can the feet be replaced
Answer:	Yes. Replacement spike feet come with tripod.
Question:	Can the am-254 hold a canon 70-200 2.8 steady enough for 30sec exposures? please only answer if you have experience trying this. thanks
Answer:	I have the am-284 (rated very similar to the am-254) and it held my Pentax K1, lens, and filter kit for upwards of 80 secs in moving water. I’d say you’d be safe as long as you aren’t in extreme conditions. The head also plays a huge role in stability.

Product features

SIRUI AM-2 TravelLegs Pro - Amaze the Professionals

The legs are made of 10-layer carbon fiber, which activates three factors: lightness, vibration immunity and temperature neutrality

• Light carbon fiber tubes
• Reversible cap screw 1/4"<-> 3/8"
• Large aluminium head mounting plate
• No centre column - higher stability (centre column SL-200 optional)
• Semi-automatic leg angle lock
• Twist locks 1/2 turn - enough for loosening
• Exchangeable rubber feet and metal spikes
• 1/4" accessory connector for flex arms, microphones etc.

Small but oho

AM-223 with B-00K - if there is no room at all, then the AM-223 still fits in the luggage.

The right SIRUI AM-2 tripod in every case

All tripods of the AM-2 series have the same functions and the same equipment.

Accessory connection, snap hook and Co.

Accessory connection, snap hook and Co.

The practical and helpful accessory connection allows the mounting of equipment with 1/4" threads. And the snap hook serves for loading when it is a little windy.

With centre column higher up

If you need it a little higher, the SL-200 centre column can be purchased separately. Just screw it on and you're good to go. And also for people up to 190cm hig;)

Product description

VEO 3GO 265HCB ultra-tall carbon fiber tripod folds down into a compact, 26mm, 5 section travel tripod kit with a ball head optimized to carry camera capacities up to 22 pounds. For ease of portability, this travel tripod folds down to just 16.1" and weighs 3.1 pounds. This tripod extends up to 65.5", making it perfect for those that need additional height. As well as traditional tripod shots, this travel tripod allows you to shoot low angles or simple macro shots by either reversing the 2-section column, or removing the ball head to attach the head to the included Low Angle Adapter. This ability is enhanced using the three easy set leg angles (21°, 50° and 80°) that also allow you to set-up the tripod for maximum stability on any terrain. Where you don’t need a tripod, a leg can be removed in seconds and attached to the central column to create a monopod, vlogging stick or a selfie stick. The rapid set twist leg locks allow the tripod to be deployed in seconds. In addition, these leg locks have been designed to be easy to dismantle, clean and reassemble. The tripod also comes with a choice of rubber or spiked feet, allowing you to choose the best set-up for the conditions. Windy? No problem. Simply mount a camera bag or additional weight to the retractable hook located at the base of the center column. The Arca Swiss compatible BH-102 ball head allows you to use any Arca Swiss compatible quick release plate (QS-60 V2 included). The BH-102 ball head has an ergonomic locking knob that makes it easy to lock the head. It also includes a separate pan-lock so you can set your level and take 360° panoramic shots with ease. If you want to get the most from your smartphone camera, this travel tripod kit includes a smartphone connector for any smartphone up to 3.4 inches wide. To maximize stability (or to allow you to use the monopod as a selfie stick) there is also a Bluetooth remote shutter trigger so you don’t need to touch the phone as you take the photo.

• Folds down to just 16.1 inches and weighs just 3.1 pounds for easy portability. Extends to 65.5 inches, with a maximum load capacity up to 22 pounds.
• Monopod leg that extends to 66.9 inches that is fast and easy to deploy. Arca Swiss compatible BH-102 Ball Head with independent pan-lock. Reversible center column, or use the Low Angle Adaptor, for low angle/macro photographs
• Three easy set leg angles (21°, 50° and 80°) for maximum stability on any terrain. Rapid set and easy to clean twist locks. Includes rubber and spiked feet allow for easy set-up on different types of terrain
• Retractable hook to add weight for extra stability. Includes a tripod bag. Reversible thread to allow heads with 1/4” or 3/8” thread to be attached with ease
• Includes smartphone connector for any smartphone up to 3.4 inches wide. Bluetooth remote shutter trigger allowing the monopod leg to be used as a selfie stick

Product features

Freedom of Choice

Wherever your work (or play) takes you, the Vanguard VEO 3GO series tripod kits provide the options, dependability, and functionality you need for photo, video, and more. Use it as a tripod, monopod, or selfie/vlogging stick. An included smartphone holder and Bluetooth remote let you set up stable shots away from the tripod stand. Set your legs at one of three angles to adjust your perspective, or utilize the central column to capture low or macro shots.

Maximum Versatility

Three easy-set leg angles (21°, 50° and 80°) allow you to adapt to your terrain. The rapid-set twist leg locks allow you to pick up and set down without losing valuable time to capture your shot.

Maximum Control

Shoot low angles or simple macro shots by either reversing the central column or removing the ball head to attach the Low-Angle Adapter (LAA), which is included with some models (235AB/CB and 265HAB/HCB only).

Maximum Portability

VEO 3GO tripods fold down easily and securely, so you can pack them and go without sacrificing space. Check out Vanguard's extensive line of photography bags for more packing options.

Smart Functionality

This kit includes a smartphone connector for any smartphone up to 3.4 inches wide. To maximize stability, utilize the Bluetooth remote shutter trigger, so you don’t need to touch the phone as you take the photo.

Converts to a Monopod/Selfie Stick

When you don’t need a tripod, you can remove the leg in seconds and attach it to the central column to create a monopod, vlogging stick, or selfie stick.

Stay Grounded

With included spiked feet on some models (235AB/CB and 265HAB/HCB only), you can plant down firmly on sketchy terrain.

Windy? No problem. Simply mount a camera bag or additional weight to the retractable hook located at the base of the center column.

• Rotatable Horizontal Center Column: The center column can be used vertically (0° /22.5° / 45° / 67.5° / 90°) or horizontally. Photographers can more easily achieve panoramic shooting, macro shooting and low-angle shooting. Please note: the calibration lines must be aligned to lock or the column is unstable
• Practical & Adjustable: the length of the 4 legs can be easily adjusted with a screw-type knob. You can flexibly adjust the working height from 24 inches/60 cm to 75 inches/191 cm in a few seconds, which is easy to carry. The central axis screw can be quickly disassembled and converted into a monopod or cane to provide another convenient shooting method
• Precise & Flexible: The bubble level can help you quickly find the balance point of the rack. The specially designed ball head is equipped with a 360-degree panoramic view and a metal rotating ball to ensure the accuracy of photography, so that you can get the perfect shooting and order every time. Breathtaking panorama
• High Quality Structure & Strong Stability: The maximum 25mm large diameter magnesium-aluminum alloy tube, the load capacity is up to 22.04lbs, and the anti-slip foot design provides safety and stability support for DSLR cameras
• Upgraded Design: The angle of each leg can be flexibly adjusted, so it can be used on uneven ground, steps, rocks and other places. With hooks, you can hang sandbags or other heavy objects to increase stability; the 1/4-inch screw hole under the bubble level allows you to use more photographic equipment, such as magic arms, monitors and LED lights

User questions & answers

Question:	does the arm go horizontal enough to not see the tripod legs? At what focal length and distance from the ground
Answer:	Do not know I purchased the RT-90C and have no problems or flex with it.
Question:	Can I use this with gopro camera
Answer:	The classic 3 locking position
Question:	How long is the horizontal arm
Answer:	The RT90C i purchased in December 2019 did have everything included in the first picture. However, when i unboxed the tripod, I initially missed finding the bowl adapter head. It was stored in a pouch in bottom of the carrying case.
Question:	Can I use this tripod with a celestron travel scope
Answer:	Dear friend, the silver plate and bowl of LT364c cannot be used on other tripods; the silver plate of RT90C can't be used on other tripods, but the bowl BW75 and bowl adapter BL75 of RT90C can be used with most tripods.

Product features

The era of omnidirectional shooting

360°Panorama and Ball Joint

Lightweight material and Easy to carry

Flexible monopod and Easy to travel

Multi-Environment use function

Reverse folding design and close to nature

High-quality, strong and luxurious

91cm maximum height design

Product description

Sirui A1205Y Tripod + Y-11Head, Gray, A-1205Y

• Load Capacity: 22 lb
• Maximum Height: 55.1"
• Minimum Height: 10.2"
• Folded Length: 14.6"
• 180° Reverse-Folding Legs

• Compact 23mm, 5-section carbon fiber travel tripod folds down to just 15.8”, extends to 57.1” and weighs just 3 pounds. Patented magnesium rotating center column for compact travel mobility and easy setup
• Low angle/ macro shooting with reversable center column, or included Low Angle Adaptor. 3-easy set leg angles (21°, 50°, 80°) for maximum stability in any position
• Easy to open and clean twist leg locks with clear “click” notification when locking mechanism is released. Rubber or anti-rust stainless-steel spiked feet for ultimate stability on any terrain
• One leg transforms into a monopod in seconds. Monopod folds down to 17” and extends to a maximum of 59.5” with the use of the center column
• VEO 2 BP-50 Ball/Pan Head with a maximum pay load of up to 13.2 pounds. Incudes a removable telescopic pan handle to transition into an action-following pan head for video shooting or spotting scope use

Product features

Vanguard VEO 2X Compact Travel Tripods

VEO started with travel in mind and has evolved into a collection of market leading products for multi-faceted users. VEO 2X series is the ultimate 4-in-1 travel tripod kit that switches from tripod to monopod, and transforms from ball head to ball head with pan handle so that you can shoot stills or video with your DSLR or mirrorless (CSC) cameras, as well as being able to support sporting optics such as a spotting scope.

NEW Ball/Pan Head

The unique Arca Swiss compatible Ball Head is ideal for everyday photography, while a Pan Handle can be easily fitter (or removed) to expands the versatility of the head for video applications (as well as sporting optics application).

New Quick Twist Lock System

Advanced Quick Twist lock system for fast position setting. Extend the 4 sections in a matter of seconds. Clean-up is a snap too! The new open to click twist leg locks allow for easy fresh water rinsing after working in most demanding environments.

Quick Set-Up Center Column

Exclusive and innovative Central Column system that allows to set the central column and tripod legs in less than 15 seconds.

Monopod Leg

Like to use a monopod? The VEO 2X has a standalone monopod option with choice of ball/pan head, when lighter and more flexible mobility is called for. Transform into the monopod mode in seconds by simply unscrewing the individual TPU gripped monopod leg, attaching to the center column (or remove the head if the extra height is not needed).

The Veo Collection

The new VEO 2x series is designed to be the ultimate travel Tripod kit ready for any eventuality! VEO 2x is introduced to the VEO Collection with X-TRA features. With its Patented rapid rotating center column designed for travel this new series will be extremely feature rich and comes with many extras. Compact, lightweight and built to travel! All VEO 2x tripods have the capability of having one leg detach and become a monopod. The leg with the TPU grip easily converts to a monopod along with the center column top plate and head. Attach the center column to the individual TPU gripped monopod leg to increase the monpod height even more! The VEO 2x incorporates new click style twist leg locks that allow for easy disassembling and reassembling. Security of the head and central column top plate is a feature that many tripods with a monopod leg feature do not have, but Vanguard has incorporated it into its design to keep gear safe and secure!

Product description

Specification:



Main Material: Aluminum Alloy

Camera Connecting Thread: 1/4"

Tripod Connection Thread: 3/8"

Ball Diameter: 45mm

Height: 105mm

Bubble Level: 2

Maximum Load: 20kg

Net Weight: 550g





Package including:



1 x SYS-90 Professional Tripod Ballhead

1 x Quick Release Plate

• High-quality all-metal ball head, the sphere’s diameter is 45mm, CNC super machining, multi oxidation treatment on the surface, with a very smooth hand feel and excellent durability.Comaptible with Arca Swiss.
• 360 ° horizontal rotation panoramic head, double locking knob design, flexible operation
• Removable quick-release plate, comes with 1/4” screw and safety lock, suitable for all SLR cameras; the ball head comes with 3/8” screw mount, can be widely applied to various professional tripods
• Built in dual bubble level indicators: Aiming and horizon leveling, can be accomplished as one instinctive motion
• Scale on the pan for panoramic shoots

User questions & answers

Question:	Can this support a full frame camera and a 70-200 f2.8 lens to shoot the moon without drooping
Answer:	I have a Canon EOS Rebel T7i which is a crop sensor camera; however, I have used it with a 100-400 lens which is quite heavy. You have to make sure that everything is tight. I used it to shoot the first three songs of a concert from the soundboard and it did fine for me then once I tightened everything properly. I don’t know how it would do for long time spans though.
Question:	How can I purchase extra Quick release plate
Answer:	We will list extra quick-release plate for sale recently
Question:	What is the diameter of the base
Answer:	About 60mm.
Question:	Plate acra Swiss
Answer:	compatible with arca swiss

Product description

XB-25 is the smallest of XB series ballheads with low center of gravity and high locking strength.

Elaborately CNC machined from T6061 aero-space grade aluminum, Type-III hard-anodized finish ensures it’s corrosion and abrasion resistant.

Its screw-knob clamp type guarantees wide compatibility with different QR plates, works with Arca-Swiss and RRS standards QR plates.

Base 3/8” thread socket, compatible with most tripods available in the market, with 1/4”-3/8” adapter bushing, it’s also compatible with tripods of 1/4” studs. Model: XB-25

Ball Diameter: 25mm

Base Diameter: 40mm

Height: 61mm

Net Weight: 138g.

Load Capacity: 5KG.

Base Thread Socket: UNC3/8”

Clamp type: Screw-knob Clamp

• ✪Aluminum material main body, type-III hard-anodized finish ensures it's corrosion and abrasion resistant.
• ✪25mm ball diameter, mini size and weighs only 138 gram, very easy to carry. Load capacity of up to 5KG.
• ✪10-15% lower in height compared with similar products, making the center of gravity lowers more than 15% for better stability.
• ✪Elongated Main knob with ratchet mechanism makes it easier to lock the ball. The main konb can be pulled out and relocated at any position desired when needed.
• ✪QR plate PT-26R included in the package, with rubber pad on the plate surface to protect your camera from scratches.

Product description

The AT-3565 Aluminum Tripod and BZ-217T Triple-Action Ball Head from Oben is a 5-section support, which has twist locks that open and close with just a quarter turn. Each section extends along with the center column to a maximum height of 61.8". With three variable leg angles, it allows you to splay the legs out and replace the regular center column with the included low-angle center column, so the tripod can go to a minimum height of 9.1" to help with macro photography.



5-Section Tripod Legs

The aluminum telescoping legs open and close by turning the twist locks a quarter turn.



Variable Leg Angles

The legs lock at three different angles for stable support on uneven terrain or at low angles. The leg angle adjustment lock also allows the legs to fold up 180° to a compact size for transport or storage.



Two Center Columns

The rapid center column, which is reversible, extends and locks into place via its twist lock. An included low-angle center column allows you to get those macro shots that are close to the ground.



Integrated Monopod

The tripod's detachable leg converts into a working monopod with a maximum height of 64.1".



Triple Action Ball Head

The Arca-type BZ-217T ball head, which includes the QR-20 quick release plate, can support cameras that weigh up to 20 lb. The head features three knobs, one to control the movement of the ball, one for the pan, and the tension control knob to add or decrease drag on the ball.



Bubble Level

The integrated bubble level on the ball head enables you to accurately align your horizon within the camera's viewfinder.



Spiked Feet

The retractable rubber feet expose spikes that can be driven into softer terrain to add stability and rigidness to the tripod.

• Load Capacity: 20 lb, Maximum Height: 61.8"
• Minimum Height: 9.1", Folded Length: 16.1"
• Leg Sections: 5, Weight: 3.7 lb
• Reverse-Folding Aluminum Legs, Detachable Leg Converts into Monopod
• BZ-217T Ball Head & Arca-Type QR Plate

User questions & answers

Question:	Is anything made of plastic, such as the knobs
Answer:	It's made in Thailand, sorry for the slow response
Question:	Does the base rotate too
Answer:	That has not happened to me. Could you provide more information, please? Was the pot empty or on high heat?
Question:	What does the allen screw do exactly? it has the provided allen wrench for the screw but not sure what purpose the allen screw has
Answer:	Hi! According to one reviewer who researched the origin of the pot on Le Creuset's website, these pots are made in Thailand. I've had great luck with my cookpot: been using it every day for at least 3 years now, and have had no problems with leaching, chipping, cracking, or metal distortion. I've dropped the lid a few times, and no chipping! The inside of the pot does get discolored with use, but an occasional scrub with baking soda takes off the discoloration safely and easily. I wash it by hand, so don't know how it would do in a dishwasher. I have the yellow one, which stays on my range at all times, and the color is still as brilliant as the day it was purchased.
Question:	Will this work with a phone/tablet holder
Answer:	This product is made in Turkey. My wife loves it.

Product features

UTEBIT 2 PACK Mini Ball Head with 1/4'' Removable Hot Shoe Mount Adapter, 360° Aluminum Small Tripod Ball Heads, Light Swivel Micro Ball Head

With 1/4'' Screw, compatiable for DSLR Camera, Smart Phone, Flash Light, LED Light and other camera devices and accessories with standard 1/4" thread hole.

360°Panning and From -90°to +90° Tilting

For panoramic photography, to give you different angle positions.

Bottom With 1/4" Thread Hole

Can work with light stand , tripod and hot shoe adapter.

With Locking Knob & Heavy Duty

Using the knob to adjust to the desired angle.

Max. Load : 2.5kg