10 best movo dslr accessories

A movie projector for iPhones is a device that allows you to project the content from your iPhone onto a larger screen or wall. It essentially serves as an accessory that can enhance your viewing experience, making it more immersive and enjoyable. Here are some key points about movie projectors for iPhones:

  1. Compatibility: These projectors are designed to work specifically with iPhones, typically connecting via the iPhone's Lightning port. Some may also offer wireless connectivity options like Bluetooth or Wi-Fi.

  2. Portability: Many iPhone movie projectors are compact and portable, making them easy to carry around and set up wherever you want to watch a movie or video.

  3. Projection Quality: The projection quality can vary from model to model. Some projectors offer high-definition (HD) or even 4K resolution, providing sharp and clear images, while others may have lower resolutions.

  4. Brightness: The brightness of the projector is an important factor, especially if you plan to use it in well-lit environments. Higher lumens generally result in brighter projections.

  5. Audio: Some iPhone projectors have built-in speakers, while others may require external speakers or headphones for audio. The audio quality can also vary between models.

  6. Power Source: Depending on the projector, it may be powered by the iPhone itself, an external battery, or a power outlet.Consider the power source options when choosing a projector.

  7. Apps and Features: Some projectors come with companion apps that provide additional features and settings for controlling the projection. These apps can enhance the user experience.

  8. Accessories: Look for included accessories such as remote controls, tripods, and carrying cases, as they can add convenience and value to your purchase.

  9. Price Range: Movie projectors for iPhones come in a wide range of prices, so you can choose one that fits your budget and needs.

  10. Setup: Setting up an iPhone projector is usually straightforward, but it's essential to follow the manufacturer's instructions for proper installation and alignment.

  11. Content Streaming: You can use your iPhone projector to stream content from various sources, such as streaming apps, video files stored on your device, or even screen mirroring for presentations and gaming.

Keep in mind that the specific features and capabilities of iPhone movie projectors can vary, so it's a good idea to read product reviews and compare different models to find the one that suits your requirements best.

Below you can find our editor's choice of the best movo dslr accessories on the market
  

Movo VXR10 Universal Video Microphone with Shock Mount, Deadcat Windscreen, Case for iPhone, Android Smartphones, Canon EOS, Nikon DSLR Cameras and Camcorders - Perfect Camera Microphone, Shotgun Mic

Movo

Based on 6 reviews Check latest price
  • UNIVERSAL COMPATIBILITY: For iPhone, Androids, Cameras, Camcorders, Audio Recorders, Tablets, and Laptops. Use as iPhone microphone or DSLR microphone
  • PROFESSIONAL MOVO MIC: The durable aluminum construction and battery-free design includes a sturdy integrated shock mount to minimize handling noise
  • 1-YEAR WARRANTY: We’ve got your back. Our products are designed to ease your technical woes, not add to them. Our friendly US-Based support is here to help - NOTE: To reduce hiss when using the mic on a DSLR camera, we recommend using manual audio levels, accessible from your camera’s menu.
  • CREATE: Essential compact shotgun microphone for recording YouTube Vlogs, Tik Tok, interviews, family vacation trips, live music, outdoor events, tutorials.
  • INCLUDES: Furry "Deadcat" Windscreen, Soft Case, 3.5mm TRS Output Cable (For DSLR Cameras, Camcorders, Recorders), 3.5mm TRRS Output Cable (For Smartphones, Tablets, and Mac)

Movo VXR10 Universal Video Microphone with Shock Mount, Deadcat Windscreen, Case for iPhone, Android Smartphones, Canon EOS, Nikon DSLR Cameras and Camcorders (Pink Breast Cancer Awareness Edition)

Movo

Based on 152 reviews Check latest price
  • Universal Compatiblity - Works with DSLR Cameras, Camcorders, Audio Recorders, iPhone and Android Smartphones, Tablets, and Laptops
  • Durable Aluminum Construction, no-battery design
  • 1-YEAR WARRANTY: We’ve got your back. Our products are designed to ease your technical woes, not add to them. Our friendly US-Based support is here to help
  • Includes Microphone, Furry "Deadcat" Windscreen, Soft Case, 3.5mm TRS Output Cable (For DSLR Cameras, Camcorders, Recorders), 3.5mm TRRS Output Cable (For Smartphones, Tablets, and Mac), and BCA Awareness Bracelet
  • Integrated shock-mount minimizes handling noise

User questions & answers

Question: Can this be used with a ring light
Answer: Of course, but you'll need the proper adapters. If you use it w a normal camera, you usually only have 1 cold shoe so just the mic can be put on.
Question: Can this be used with the canon rebel t
Answer: If it has a cold shoe & a 3.5 mm plug in.
Question: Will this mic attach to an iPad
Answer: yes
Question: Does this work with canon gx7 mark iii
Answer: if it has a cold shoe.

Product features

Movo VXR10 Universal Video Microphone

The Movo VXR10 is a universal video microphone designed to significantly improve audio quality compared to built-in microphones. Constructed entirely from aluminum with a light weight and compact design, the VXR10 is perfect for mounting directly on camera or using with a smartphone. No battery is required, simply plug in the microphone and it's ready to go.

Compact Design

The VXR10 is constructed entirely from aluminum with a light weight and compact design, making it perfect for mounting directly on camera or using with a smartphone.

Universal Compatibility

Universal video microphone designed to significantly improve audio quality compared to built-in microphones whether you're using a DSLR Cameras, Camcorder, Audio Recorder, Smartphones, Tablet, or Laptops.

Accessories

Includes a furry windscreen, shouck-mount a soft case, and both TRS and TRRS output cables.

Movo Photo PT8 Set of Two Aluminum 15mm Rods for DSLR Camera Rail System (8")

Based on 9 reviews Check latest price

Product description

A set of two 8 inch 15mm Aluminum Rods from Movo. All-aluminum construction, combined with precision machining, ensures that these industry standard 15mm rods will last a lifetime. Coated with black anodic oxidation surface treatment to resist weather, moisture and frequent handling.



Can be used with any standard 15mm rod/rail support system, allowing for attachment of on-camera accessories such as a mattebox or follow focus.

  • COMPATIBILITY: Can be used with any standard 15mm rod/rail support system for on-camera accessories such as a follow focus, matte box, and more
  • DURABLE FINISH: These rods can survive exposure to weather, moisture, and frequent handling thanks to the anodized oxidation coating
  • 1-YEAR WARRANTY: We’ve got your back! Our products are designed to ease your technical woes, not add to them. Our friendly US-Based support is here to help
  • LIGHTWEIGHT: The hollow and non-threaded design makes these easier and less strenuous to handle
  • SOLID CONSTRUCTION: The 2 pack of 8" long 15mm rods are cut with precision machining and made of high-quality aluminum to last a lifetime

User questions & answers

Question: indian ac adapter of xbox360 is very hot and stop working after sometime i play. what can i do
Answer: Order the 40c. The sizing on this is just like your regular bras.

Movo WMX-1-DUO 2.4GHz Dual Wireless Lavalier Microphone System Compatible with DSLR Cameras, Camcorders, iPhone, Android Smartphones, and Tablets (200' ft Audio Range) - Great for Teaching Tutorials

Movo

Based on 497 reviews Check latest price
  • UNIVERSAL WIRELESS SYSTEM: Record crystal-clear audio from your DSLR, camcorder, smartphone, or tablet. Perfect for filmmakers, vloggers, mobile journalists, and content creators
  • RELIABLE AUDIO: Features an upgraded RF Chipset that broadcasts on the open 2.4GHz frequency spectrum and wireless transmission up to 200' ft (60m)
  • 1-YEAR WARRANTY: We’ve got your back. Our products are designed to ease your technical woes, not add to them. Our friendly US-Based support is here to help
  • CONVENIENT: Listen to your audio in realtime with the headphone input to ensure accurate sound recording. For more control, adjust the microphone volume to reduce time in post-production. Each unit is powered by two "AAA" batteries for up to 6 hours of operation
  • IN THE BOX: Includes 2 transmitters with belt clips, receiver with belt clip and shoe mount, 2 lavalier microphones, 3.5mm TRS cable for cameras, 3.5mm TRRS cable for smartphones and tablets, and a hard case

User questions & answers

Question: Can the reciever recieve more than two transmitter signals? So the setup would be 4 people (microphones) with transmitters and one receiver at camera
Answer: Hi! The WMX-1-DUO can receive only be used with a maximum of 2 transmitters, we recommend getting a WMX-20-QUATRO if you'll be recording more than 2 people. You can check it here: https://www.amazon.com/Movo-WMX-20-QUATRO-48-Channel-Transmitters-Microphones/dp/B084H52Y7Q Feel free to message us if you have any questions! Best, -Movo Team
Question: What adaptor (if any) do I need to use this with an iPhone
Answer: You will need Apple's headphone to lightning adapter to connect it to thew newer iPhones. https://www.amazon.com/dp/B01LXJFMGF/
Question: Can this be used with a GoPro
Answer: These mic can connect to any camera, phone or recorder that can take a 3.5mm trs or trrs mini stereo jack.
Question: Is the wmx-1 system only for one lavalier mic or can i add more to it
Answer: Yes is the jack can fix the 3.5

Movo WMX-1 2.4GHz Wireless Lavalier Microphone System Compatible with DSLR Cameras, Camcorders, iPhone, Android Smartphones, and Tablets (200' ft Audio Range)

Movo

Based on 472 reviews Check latest price
  • UNIVERSAL WIRELESS SYSTEM: Record crystal-clear, distortion-free audio from your DSLR, camcorder, smartphone, or tablet. Perfect for filmmakers, vloggers, mobile journalists, and content creators
  • RELIABLE AUDIO: Features an upgraded RF Chipset that broadcasts on the open 2.4GHz frequency spectrum, allowing for interference-free and regulation-free wireless transmission up to 200' ft (60m)
  • 1-YEAR WARRANTY: We’ve got your back! Our products are designed to ease your technical woes, not add to them. Our friendly US-Based support is here to help
  • CONVENIENT: Listen to your audio in realtime with the headphone input to ensure accurate sound recording. For more control, adjust the microphone volume to reduce time in post-production. Each unit is powered by two "AAA" batteries for up to 6 hours of operation
  • IN THE BOX: Includes a transmitter with belt clip, receiver with belt clip and shoe mount, lavalier microphone, 3.5mm TRS cable for cameras, 3.5mm TRRS cable for smartphones and tablets, and a hard case

User questions & answers

Question: Can I use this in conjunction with the stereo mic or will there be an echo
Answer: If the receiver of the mike is plugged into the stereo, it should override the built in mike.
Question: I can’t get it to work on my iPhone 11 prox max help
Answer: You are incorrect. Besides the Lighting adaptor you also You need a special cable. 2 options. the Edutige EWL-001 or the Sarmonic. Otherwise it will NOT work!!!!!
Question: Will this transmit a stereo input
Answer: The WMX-1 receiver includes output cables to a 3.5mm TRS stereo mini-jack (cameras, recorders, etc), and a 3.5mm TRRS jack (smartphones, laptops, etc). It outputs a stereo signal at equal levels to the left and right channels.
Question: Can I plug the receiver into a mixer to amplify the sound of a pastor conducting a wedding
Answer: The output is a standard 3.5 mm TRS analog connector. It should be able to connect to any mixer input via the help of a 3.5 to 1/4" adapter or 3.5 to stereo RCA adapter.

Rode VideoMic GO Lightweight On-Camera Microphone with Integrated Rycote Shockmount

Rode

Based on 6 reviews Check latest price

Product description

Rode VideoMic go Light weight on-camera microphone.

  • Delivers clear, crisp, directional audio with incredible ease of use
  • Rode designed the videomic go with a tight pickup area that focuses directly in front of the mic
  • Reduces other surrounding sounds, ensuring that your subject is isolated from background noise
  • The integrated Rycote lyre shock mount isolates the video mic go from bumps and vibrations
  • No complicated switches or settings and is powered by your camera's external microphone input, required

User questions & answers

Question: does this mic record stereo sound or just mono? and does it let the onboard mic record as well or not
Answer: The microphone is a dual mono microphone and thus not stereo, unless you get into the very expensive stereo microphones I think you'll be pleased with the frequency response and quality. Once plugged in, the on-board microphone is cancelled out.
Question: Can you attach this to a boom pole
Answer: I believe rode sells a boom pole for this mic. You will need an extension cable as well to plug it in.
Question: Does this work with Canon 70d? Thanks
Answer: Yes it does I have the rode mic pro lyre version and it works perfectly I will say if you can afford the pro get it it cause this relies on the power of the camera so the sound isn't as good as the pro
Question: Should I get a used Rode Video Mic Shotgun Microphone or The rode Videomic go? assume I can't go far over 100$ in budget
Answer: Best qualities of the Videomic Go: Small, no battery (powered from the camera), easy to transport. Best qualities of the Rode Videomic over the Videomic Go: Battery powered (better range), high pass filter, PAD switch (for reducing sensitivity on louder recordings). Not having a battery can be nice (using the GO), but the camera you use has to be able to power over the 1/8" mic input. The high pass filter and PAD switch are nice on the Videomic, but not always necessary. If you don't think you'll need them, then the Videomic GO is the way to go.

Product features

Rode VideoMic GO

Compact and light weight by design, the VideoMic GO delivers clear, crisp, directional audio with incredible ease of use. Its tight pickup area focuses directly in front of the microphone and reduces other surrounding sounds, ensuring that your subject is isolated from distracting background noise.

The integrated Rycote Lyre shock mount isolates your microphone from bumps and vibrations that could otherwise interfere with your sound.

Constructed from a single piece of hard-wearing thermoplastic, the Lyre provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.

The VideoMic GO has no complicated switches or settings and is powered by your camera's external microphone input, requiring no batteries to operate, ensuring you never miss a great shot.

The VideoMic GO is designed and made in Australia.

CAMVATE DSLR Camera with Cage Top Handle Wood Grip for 600D 70D 80D

CAMVATE

Based on 78 reviews Check latest price
  • Camera Cage for 70D 80D
  • Wooden handgrip (right hand)
  • Have one cold shoe on the top handgrip
  • Have standard 1/4"-20 & 3/8"-16 screw hole on the cage for DIY accessories
  • We provide two rod on the package,one is 125mm,the other is 145mm, the 125mm side pipe is compatible with Canon650D,600D,550D,500D,450D,760D,750D,700D,100D,1200D; Nikon D3200,D3300,D5200,D5500; Sony a58,a7,a711; Panasonnic GH4/GH3/GH2;the 145mm is compatible with Canon80D, 60D,70D,50D,40D,30D,6D,7D,7D Mark11,5D Mark11,5D Mark111,5DS,5DSR; Nikon D7000,D7100,D7200,D300S,D610,DF; Sony A99

User questions & answers

Question: Will this fit nikon
Answer: Yes,this camera cage can fit nikon D5200.
Question: Can you flip the grip to the left side
Answer: yes but the contour for your thumb that’s on the top of handle will be flipped as well. I bought the left side handle. CAMVATE DSLR Wood Wooden Handle Grip Mount Support for DV Video Cage Rig (Left Hand) https://www.amazon.com/dp/B01GB9L7YQ/ref=cm_sw_r_cp_api_Pm9qAbJKTRDQV
Question: Will it work for GH
Answer: We are not sure about this,but this one is fit for GH5:https://www.amazon.com/dp/B01BPVIROS
Question: will this fit a 800D or t7i
Answer: Yes,This cage can fit the Canon 800D(t7i).

Product features

DSLR Camera Cage

The top handle comes with a single rod clamp and a hot shoe mount, which allows you to extend and DIY. It also provides a plenty of 1/4"-20 and 3/8"-16 thread holes. Two 20cm aluminum rods included, allows you to easy mount capability for follow focus, matte box and more. All knobs comes with adjustable design.

Camera Rig

We provide two rod on the package,one is 125mm,the other is 145mm, the 125mm side pipe is compatible with Canon650D,600D,550D,500D,450D,760D,750D,700D,100D,1200D; Nikon D3200,D3300,D5200,D5500; Sony a58,a7,a711; Panasonnic GH4/GH3/GH2;the 145mm is compatible with Canon 60D,70D,50D,40D,30D,6D,7D,7D Mark11,5D Mark11,5D Mark111,5DS,5DSR; Nikon D7000,D7100,D7200,D300S,D610,DF; Sony A99.

 

Package include:

1 x camera cage

1 x 145mm side rod

1 x 125mm side rod

Rode VideoMicro Compact On-Camera Microphone with Rycote Lyre Shock Mount

Rode

Based on 12 reviews Check latest price

Product description

VideoMicro Compact Directional On-Camera Microphone. The VideoMicro is a compact microphone designed to improve the audio quality of your videos. The VideoMicro reduces distracting peripheral sounds and focuses on the audio in front of the camera. Its pickup is more forgiving than other on-camera microphones, providing a more natural sound when recording indoors. The microphone body is made from aluminum, giving it a high level of RF rejection, and is finished in RØDE’s high-grade ceramic anti-glare black coating. Included with the VideoMicro is a camera shoe mount featuring a Rycote Lyre shockmount. Featuring a suspension structure composed of a rugged thermoplastic, it is far more effective at minimizing unwanted vibrations, handling and cable-borne noise than traditional elastic suspensions. He follows cameras unfortunately do not support the VideoMicro are Nikon D7000, Canon T3/1100D, Canon C100, C300, C500, Canon VIXIA HFR500, Canon VIXIA HFG20, HFG30, Canon XA-10, Canon Vixia G10, Canon Legria HF G25.

  • Buy only from Amazon.com (labelled ‘shipped and sold by Amazon.com’)
  • Compact microphone designed to improve the audio quality of your videos - only 80 millimeter (3") long and 42gm (1.5 ounce)
  • No battery required (powered by camera plug-in power - min 3V)
  • Includes Rycote lyre shock mount and deluxe furry windshield

Product features

Rode VideoMicro

The VideoMicro is a compact microphone designed to improve the audio quality of your videos. It incorporates a high-quality cardioid condenser microphone capsule for great quality audio recordings when used with a wide range of cameras. A directional microphone, the VideoMicro reduces distracting peripheral sounds and focusses on the audio in front of the camera. Its pickup is more forgiving than RØDE’s other on-camera microphones providing a more natural sound when recording indoors. Perfect for capturing incredible audio to accompany inspiring vision. The microphone body is made from aluminum, giving it a high level of RF rejection, and is finished in RØDE’s high-grade ceramic anti-glare black coating. Included with the VideoMicro is a camera shoe mount featuring a Rycote Lyre shock mount.

Featuring a suspension structure composed of a hard-wearing thermoplastic, it is far more effective at minimising unwanted vibrations, handling and cable-borne noise than traditional elastic suspensions. Virtually indestructible, the Rycote Lyre will never sag, snap, wear out or require rethreading to maintain its effectiveness. Also included is the WS9 synthetic furry wind shield with foam inner cell, designed for use in outdoor scenarios where wind and environmental noise can inhibit recordings. Optionally available is the RØDE SC7, a TRS to TRRS cable that allows the VideoMicro to be used with smartphones, to capture crystal clear, directional sound for video and video applications such as Periscope.

Movo WMX-20-DUO 48-Channel UHF Wireless Lavalier Microphone System with 1 Receiver, 2 Transmitters, and 2 Lapel Microphones Compatible with DSLR Cameras (330' ft Audio Range)

Movo

Based on 270 reviews Check latest price
  • HIGH-GRADE QUALITY: Capture professional audio with ease and universal functionality. Fully compatible with DSLRs, camcorders, smartphones/tablets and other recorders. Ideal for filmmakers, broadcasters, and vloggers.
  • TECHNICALLY VERSATILE: Optimal for both live sound and recording. Dynamic range that picks up a wide frequency spectrum (35 Hz to 18 kHz) with a distance of up to 330’. Operates on UHF spectrum in 2 groups of 48 channels (up to 96 unique frequencies).
  • 1-YEAR WARRANTY: We’ve got your back. Our products are designed to ease your technical woes, not add to them. Our friendly US-Based support is here to help
  • USER-FRIENDLY: Setup your mic in minutes. Lightweight, portable, and easy-to-use interface makes it accessible for the hobbyist or the seasoned pro. Runs on AA batteries (up to 6 hours of run-time).
  • WHAT'S INCLUDED: 2 wireless bodypack transmitters with belt clips, 2 lavalier microphones, portable receiver camera shoe mount, XLR cable, 3.5 mm TRS cable, durable carrying case

User questions & answers

Question: can both mics be used at the same time
Answer: Yes. They can if used with a zoom - I'm not sure if it works the same connected directly to a camera - but I don't see why it wouldn't work.
Question: Does the transmitter and recei ver have XLR inputs
Answer: No they have 3.5 mm (headphone) inputs. You can use and XLR adapter out of the receiver. They are meant to be used with a lav mic
Question: Anyone know if this receiver outputs the two mics into two seperate channels or does it merge them into one? -thanks
Answer: The WMX-20 Duo receiver has both "mono" and "stereo" modes. The mono mode combines the two mics and outputs the same signal on both left and right channels. The stereo mode outputs the A and B mics separately on the left and right channels of the TRS connector. I bought a 3rd-party 3.5mm TRS to 2 XLR connector cable and run the receiver output into two separate XLR inputs on my audio interface That way, I have two separate mono inputs that I can amplify and record independently
Question: Does this pro version support recording each channel separately (aka multitrack recording) or does it mix both together
Answer: Yes, the WMX-20-DUO has both stereo and mono output modes so that you can post-process individual channels.

Amazon Basics Lightweight Camera Mount Tripod Stand With Bag - 16.5 - 50 Inches

Amazon Basics

Based on 41 reviews Check latest price

Product description

An Amazon Brand

  • Adjustable-height tripod made of lightweight aluminum; weighs just over a pound
  • 3-way head allows for tilt and swivel motion; portrait or landscape options
  • Quick-release plate helps ensure fast transitions between shots
  • 3-section, lever-lock legs for easy height adjustments; zippered storage bag included
  • Measures 16.5 inches (collapsed); extends up to 50 inches
  • Not recommended for use with heavy, high-end DSLR cameras (total equipment weight should not exceed 4.4 pounds)

User questions & answers

Question: Does any iPhone adapter work for this tripod? I have an iPhone 6s
Answer: It would need to have the 1/4" threads on the iPhone adapter, this one will work: https://www.amazon.com/dp/B06XJFCD8L
Question: My plate broke .. where can i get an extra one
Answer: Yes, you can buy that part, it is called a quick release plate, and one that fits it can be found here: https://www.amazon.com/dp/B083613WCT
Question: can this hold a nikon l340 and a sony hdr cx
Answer: I'm not sure what size they are but it held nikon dl3100 just fine. It's basic but everything tightened up nicely. The husband sends to think we need a stronger one but I'm ok with this one. Hope this helps
Question: Does Amazon sell spare quick release plates for this tripod
Answer: You can buy spare quick releae plates for this tripod here: https://www.amazon.com/dp/B083613WCT

Product features

3-Way Head

Get the perfect shot with the tripod’s smooth tilt mechanism and explore panoramic possibilities with 360-degree swiveling. Turn knobs to secure.

Quick-Release Plate

A quick-release mounting plate makes it easy to remove your camera from the tripod, helping to ensure fast transitions between shots.

Adjustable Height

The tripod's legs can be individually adjusted as needed or all 3 can be raised to the full height of 50 inches. Includes rubber feet for stability.

Lightweight Design

Made of strong yet lightweight aluminum, the tripod transitions effortlessly from one spot to another and transports easily. Includes carrying case.).

Latest Reviews

View all