14 best nimh batteries chargers

• Advanced fire-proof material has been apdoted to this EBL C808 charger - freely working for 2/4/6/8 AA/AAA Ni-MH/Ni-Cd rechargeable batteries.
• Globally charger with smart LED to show its charging progress, when LED lighting green means the battery is fully charged.
• Controlled by MCU, automatically stop charging when detecting improper input voltage, defective or short circuit or non rechargeable batteries.
• Using -∆V intellectual cut-off charging method, automatically turn to trickle charge, prevent the batteries from over-voltage, over-current or over-heat.
• Constant current charging would protect the batteries against current fluctuation and keep using the charger safely.

User questions & answers

Question:	My 4 batteries were losing charge so I put them in the charger. The lights are green. Do they have to be completely dead for them to recharge
Answer:	If your batteries are a few years old (or have been over-charged routinely), they may have developed high internal resistance. When used in a photoflash unit, for example, they will give very slow refresh time since the terminal voltage is lower under load. But when you put them in a charger, the terminal voltage becomes higher due to charging current. So the EBL charger (which is not very smart) considers those batteries as fully charged, even through they are not.You should get some better quality rechargeable batteries (such as Panasonic eneloop) to use in your photoflash unit.
Question:	Can you charge different mAh batteries at a time? Lets say I have four 2000mAH and four 2300mAH batteries, do I have to charge these separately
Answer:	I would think they can be charged together. The mAh value simply is an indication of the length of time the battery will operate. It has nothing to do with out put current or voltage. The 2300 may take a bit longer to charge than the 2000, but I cannot say for sure that would be the case. I would put the 2000's together and the 2300's together. Don't put one size next to the other size.
Question:	How long does it take to fully charge batteries
Answer:	Charge time is determined by the capacity of the batteries divided by charging current. The charging current of EBL 808A is very low at 200mA. So to recharge a pair of 2800mAh batteries at 200mA will take at least 14 hours.
Question:	can it charge uneven amount of batteries (1, 3, 5...)? Can you recommend any charger to charge 3 batteries? AA or AAA
Answer:	This charger can only charge in pairs, but we do have some other chargers that can charge uneven amount of batteries, here are the links: 1. http://www.amazon.com/gp/product/B00KBQ7U102. http://www.amazon.com/EBL-Battery-Rechargeable-Batteries-Released/dp/B00OT7HSBO3. http://www.amazon.com/EBL%C2%AE-Universal-Discharger-Rechargeable-Batteries/dp/B00IHT2AUE/ref=sr_1_11?s=hpc&ie=UTF8&qid=1399165294&sr=1-11&keywordsYou can choose your favorite ,may it help you!

Product features

EBL C808 Model (Latest Version) Battery Charger - Upgraded

Compatible:

Can both charge AA and AAA Ni-MH Ni-Cd rechargeable batteries(Do not charge alkaline or Lithium batteries)



How many batteries can be charged at a time:

2/4/6/8 AA or AAA batteries together at a time, need to charge batteries in pairs, do not charge uneven amount of batteries

4 LEDs show the status of charging, never charge 1 AA + 1 AAA together at 2 slots which are controlled by 1 LED

Reasonable Circuit Layout - Worldwide Usage

Patent Trickle Charge Mode

Details Shows Professional

Better Heat Dissipation

Heat dissipation design help the EBL 808 battery charger has a better function: overheat-detection to prevent over-charging.

Product description

Valken Energy. Valken brings you yet another product with market leading quality and value. Valken, who else.

• Automatic stop full charge by Delta Peak detection
• Input voltage: 100-240VAC
• Output voltage: 8.4V-9.6VDC
• Charge current: 600mA
• Tickle current: 200mA (automatic stop after 5 hours)
• Short circuit & reverse polarity protection

User questions & answers

Question:	Will this stop charging when the battery is full
Answer:	No
Question:	I bought this charger and it blinks orange and red once plugged into my battery. Does anyone know what that means? The battery works just fine
Answer:	it has never happened to me maybe theres something wrong with your battery? try a battery that works just fine
Question:	Will this work for AA 500m Ah 9.6v
Answer:	I don't believe it will
Question:	Will thiis charger work for the imaginext spike ultra dinasaur by fisher price 9.6v, aa size 1300mah
Answer:	No the connectors are not the same size

• Individual charging status for each slot, can freely charge 1,2,3,4 Ni-MH Ni-CD AA/AAA rechargeable battery.
• Smart LCD to show its charging progress separately, the battery icon stop flashing when fully charged.
• Advanced MCU control and -∆V function, over-heat and over-current protection, short-circuit protection, non-rechargeable and defective battery detection.
• Trickle charged mode will help maximize the capacity of battery to full.
• Worldwide usage: 100-240V AC, 50/60 Hz.

User questions & answers

Question:	What is the operating voltage & frequency 120v, 50hz or 220v, 60hz or 120-220v, 50hz-60hz
Answer:	EBL-907 shows 100 to 240 volts AC - 50/60 hz
Question:	will it charge 2/3 aa size battery
Answer:	No, it is for standard aa/aaa sized batteties.
Question:	Does it come with the rechargeable batteries
Answer:	NO! NO! NO! It does NOT come with the rechargeable batteries!
Question:	Does the EBL 907 charger work with non-EBL batteries like the Amazon Basic batteries
Answer:	It will work with any Brand Nickel Cadmium and Nickel Metal Hydride cell. It will not work with Rechargeable Alkaline (RAM), Nickel Zinc, or Lithium Ion. I used this on Panasonic Eneloop Nickel Metal Hydride cells.

Product features

EBL 907 Model Smart Individual Battery Charger

Model

EBL 907 is professional on AA, AAA Ni-MH/Ni-CD rechargeable battery.

Individual function helps to charge batteries in pairs and single.

Compatible:

Can both charge 1,2,3,4 AA and AAA Ni-MH Ni-CD rechargeable batteries individually.(Do not charge alkaline or Lithium batteries)

Features of charger

Input: 100-240V AC, 50/60 Hz 500mA Max

Output:

1x AA 1.2VDC 2000mA, 1x AAA 1.2VDC 2000mA;

2x AA 1.2VDC 1000mA, 2x AAA 1.2VDC 1000mA;

3x AA 1.2VDC 500mA, 3x AAA 1.2VDC 500mA;

4x AA 1.2VDC 500mA, 4x AAA 1.2VDC 500mA;

Product description

• Specifications : Input voltage for AC/DC adapter: 100-240 VAC , Charging current range: 200 mA - 1800 mA . Power Requirements : Display : AC power adaptor included , Dimensions : Display : 3.00 x 1.50 x 5.10 (are in inches )
• Lcd shows capacity for each battery when charging is complete
• Charges aa and aaa rechargeable batteries simultaneously
• Select different charging current for each channel: charge, discharge, refresh, test; automatically switches to trickle charge when charging is complete to ensure maximum battery capacity
• Overheat detection to protect over-charging
• Works with all nicd and nimh "AA" and "AAA" rechargeable batteries; charges AA and AAA rechargeable batteries simultaneously
• LCD shows capacity for each battery when charging is complete

User questions & answers

Question:	Does the model accurately charge C or D size batteries
Answer:	I have only used it to charge AAA and AA. It comes with with adapters for C and D batteries that the AA fit into. Based on the size I do not believe C and D batteries will charge properly. Also from the manual "charging unit which enables quick and optimum charging to AA and ―AAA rechargeable batteries"
Question:	Does this charger have the ability to charge 1 battery or 3 batteries at a time? Or do you have to have a 2 in each bank
Answer:	I own 3 of these. You can charge anywhere from 1 to 4 batteries at a time, and they can be mixed type. For example, you can charge 3 AAA and 1 AA at the same time. I love these chargers.
Question:	Can someone tell me whether the batteries that come with this pack are low self-discharging (LSD
Answer:	They are the ordinary (high-self-discharge) type. The AA cells are not that great, as they were tested to around 2200mAh only. The AAA cells are around 900mAh.
Question:	What are the benefits of the BC1000 over the BC-700? Are they worth paying extra for
Answer:	I have both. The BC1000 can also charge at 1000, 1500 & 1800mA. 2 batteries only at 1500 & 1800mA. The problem I'm running into is at anything above 700mA, the thermal cut out kicks in and the charger stops charging until the batteries cool down. All my batteries are Eneloop or Amazon high capacity. (the Amazon batteries are Eneloops) So if you already have a BC-700...IMO I don't think it's worth upgrading unless you need a second charger.

Product description

The Tenergy TN438 16-Bay charger is our largest consumer charger to date. With Smart circuit detection, all 16 channels function independent of each other, allowing for any combination of AA/AAA or NiCD/NiMH to be charged at once, with a clear LCD display of current charge status.



The large volume of channels eliminates the need for multiple chargers, and cuts down on charging time. Whether your large family needs batteries for toys or portable devices quickly, or a small business needs stock of power supplies, this rugged and compact charger will keep you prepared.



Specifications: Input: AC 100V~240V 50HZ/60HZ

Output: 12V DC 2A

Rated Charging Current (Normal Charging): AA: 500mA; AAA: 250mA.

discharging current: 200~300mA

Applicable battery type: AA/AAA NiMH/NiCd rechargeable batteries

Product Weight: 14.5oz (charger only)

Product Size: 12 x 4.1 x 1.2 in



Package Contents:

1 x Tenergy TN438 16-Bay AA/AAA NiMH/NiCd Battery Charger

1 x AC Wall Adapter

1 x Car Adapter

1 x Manual



Estimated Charging Time Table:

AAA 700mah - 3.7 hrs

AAA 800mah - 4.2 hrs

AAA 900mah - 4.7 hrs

AA 1000mah - 2.6 hrs

AA 1600mah - 4.2 hrs

AA 2000mah - 5.2 hrs

AA 2500mah - 6.5 hrs



*The charging time is just for reference, and actual times may slightly vary. This charger is capable of charging higher mAh rated batteries, but will take longer than the longest stated time in this table.

• SAVE TIME & CHARGE MORE - Tenergy TN438 AA, AAA smart battery charger offers 16 different channels allowing you to charge any combination of AA/AAA NIMH/NICD rechargeable cells. Eliminate the need for multiple household AA/AAA battery chargers.
• LARGE LCD SCREENS - The easy-to-read LCD panel on this rechargeable battery charger displays the charging/discharging status of each individual battery.
• SMART CHARGE TECH - Built-in Smart Technology provides full protection against overcharging, overheating, short-circuiting, over-current, and reverse-polarity on the Tenergy NiMH/NlCd battery charger. Additionally, the eight hour safety protection will help save energy and prolong battery life.
• OPTIONAL REFRESH CYCLE - Easy to use cycling feature fully discharges and charges your cells to extend their overall lifespan and performance.
• ON-THE-GO CHARGING - We included a worldwide 100~240v AC adapter and car charger to make this truly a universal charger for AA/AAA batteries, the ultimate unit in portability. Includes one year warranty.

User questions & answers

Question:	Hi can we use eneloppe panasonic rechargeable batteries with the charger
Answer:	This Tenergy TN438 Smart Battery Charger will work with other brands of batteries as long as they are rechargeable AA/AAA size and are NiMH/NiCd type.
Question:	How long does it take to charge batteries
Answer:	this will depend on the capacity of the battery and the state of charge it currently has.
Question:	Will it charge any brand of battery
Answer:	I have several brands of rechargeable AA and its works for all of them. They will not all recharge by the same time. I try to keep the same type together.
Question:	what does charge error mean? It is not addressed in the instructions
Answer:	It mean that the charger has analyzed the voltage change between charging and discharging. It is constantly performing tests on the batteries. It has decided that the battery is not holding a charge as well as it expected the battery to do. Unfortunately, this charger is too sensitive and gives up on batteries that still have a lot of useful life left in them. You can't use this to charge batteries that are more than a couple of years old or batteries made by different manufacturers. I don't think there is a way to defeat the error message and still charge the batteries.

Product description

Conveniently charges 4 AA or AAA NiMH rechargeable batteries at the same time.3-5 hour charge time with auto shutoff to prevent overcharging and battery damage. Manufactured in China .The charger is equipped with audio and visual alerts. A red light means that charging has started, and you will hear an audible beep when charging begins. A yellow light appears when charging is 50 percent complete and charging is continuing. A green light means charging is complete, and the batteries are 100 percent full. You will hear an audible beep upon completion. If a bad battery is detected, a red X will illuminate, and the charger generates a repetitive audible beep upon detection. Audio and visual alerts:Red light - Charging has started; audible beep when charging begins. Yellow light - Charging is 50% complete and charging. Green light - Charge is complete and batteries are 100% full; audible beep upon completion. Bad Battery Detection Alert - If a bad battery is detected a red ‘x’ will illuminate; repetitive audible beep upon detection

• Charges 2 or 4 AA or AAA NiMH rechargeable batteries at once (4 AA batteries included)
• State of the art Charge Status Indicator system visually and audibly alerts on your batterie's charge levels
• Get a full charge in 4 hours with the rapid charging power of Recharge Pro (times may vary by NiMH battery)
• Auto safety shut off and overcharge protection features prevent damage from overcharging, helping to maximize battery life
• Built in, fold out plug design allows you to easily store the Pro Charger Battery Charger when not in use
• Compatible with all AAA and AA NiMH rechargeable batteries (Energizer Recharge batteries recomillimeterended)
• The world’s No.1 recharge brand (according to market survey data)
• Note: For any troubleshooting steps please refer product user manual in technical description

User questions & answers

Question:	Can you use the charger on the Energizer Power Plus NiMH AA Rechargeable Batteries rated at 2300 mAh
Answer:	You could if it actually worked. This charger stopped working within a month. I returned mine. Also you might want to consider more battery slots. 4 seems ok at first but now I got 1 with 8 slots and I think it's too small.
Question:	Does this charger only charge in pairs? Is it possible to charge 1 cell (at a time) with this charger
Answer:	I have owned this. The universal charger WILL charge batteries individually. There are 4 charging 'points' and you can choose to put one small battery (AA or AAA) in one point. Of course, you can also put two small batteries in each point to get the full 8-at-a-time figure. This also only applies to the small batteries. Cs and Ds are charged individually in each point, so their max is only 4 at a time total.
Question:	Can this charge aa and aaa at the same time
Answer:	Yes. AAA on one side and AA on the other. Not on the same side at the same time.
Question:	Can i use Energizer CHRPROWB4 Pro Charger with 240 volts 50 Hz AC input
Answer:	Hi Nikhil Singh, over at the Energizer web site they have some additional information. Look under batteries and then battery chargers. You can download the user manual for this model. The user manual clearly indicates that 240V 50Hz power is OK. The only problem you will have is the plug. The two-prong plug is designed for U.S. outlets. Of course, any plug adapter will solve that problem.Basically, the answer is yes.

Product features

Delta V Auto Shut-Off

The Pro Charger automatically shuts off the circuit when batteries are fully charged.

Overcharge Protection

Prevents against overcharging, which can shorten the life cycle of your rechargeable battery.

Maximizes Battery Life

These safety features make sure that you get the most of out of your battery performance.

• Fast charge - NiCd/NiMH battery pack charger that provides 1Amp or 2Amp options. Quickly charge your battery packs; 1Amp is recommended for 1000-1800mAh packs, and 2Amp is recommended for any pack over 2000mAh.
• Universal smart charger - Charges battery packs based on automatic voltage detection. Charges your NiMH or NiCd battery packs that are 6V, 7.2V, 8.4V, 9.6V 10.8V, and 12V battery packs.
• Easy-to-use - A great airsoft battery charger or RC car battery charger with simple LED indicators for charging status. Green light for fully charged and red light for charging.
• Hobby battery charger - Power all your hobbies with one charger. Charge your NiMh/NiCd battery packs for Airsoft, RC Cars, and or remote controlled toys. Includes standard size Tamiya connector, standard to mini Tamiya adapter, standard Tamiya to Alligator Clips adapter.
• Tenergy safe - To give you peace of mind, Tenergy's chargers meet rigorous American UL 60950-1 safety standards. For added security, the charger also includes a temperature sensor to prevent over-heating while charging. Buy with confidence, your charger includes a 12-month warranty.

User questions & answers

Question:	what type of connectors does this have
Answer:	You will have to buy or make ends to convert to ic3 the charger does not come with ic3 plugs standard.
Question:	can this charge batteries with a mini connector
Answer:	Hi, it can discharge 1s battery.
Question:	I am getting a 12v cb radio, will i be able to hook this to the red and black (with the converter) and it will power the radio while i test it
Answer:	Yes, but it is better that you can set the parameter smaller than 10 amps, if the 10 amps is the full, because charging 10 amps in the long time, it won't be very good for your battery. And you can charge 2 different batteries at the same time, because dual battery charger.
Question:	Will this work for charging Fisher Price Spike the Ultimate Dinosaur battery pack? LH 130-2A51MC8HROT 9.6v, AA Size, 1300mAh
Answer:	Of course, it does.

• Compact charger - A smart battery charger for NiMH battery packs of 8.4V-9.6V(7-8 cells) and capacity range of 600mAh-2500mAh. NOTE: This charger is only for recharging NiMH batteries, do not charge LiPo batteries.
• Hobby battery charger - Power many hobbies with one charger. Charge NiMH 8.4V-9.6V battery packs for your airsoft guns, RC cars, and or remote controlled toys. Includes a mini Tamiya connector, mini to standard Tamiya adapter.
• Easy-to-use - The LED indicators helps you quickly determine your battery status; green light for fully charged and red light for charging. This airsoft battery charger can activate over-discharged cells, detect malfunctions, and bad batteries.
• Advanced protections - This RC battery charger has built-in safety protections against reverse polarity, short circuit, and over-charge. It will also automatically stop charging when the battery pack is fully charged through Delta Peak detection. 
• Tenergy warranty - The universal 100-240V AC input enables this charger to be used anywhere. Buy with confidence, this Ni-MH rechargeable battery charger features CE, UL certification and also includes 12-month warranty.

User questions & answers

Question:	This will stoop charging when it’s done or will it keep going
Answer:	It will automatically stop charging when it is fully charged,which is why it is called a "smart charger ".
Question:	Will it work on a 9.6 volt battery for a airsoft gun
Answer:	The one my son used for airsoft gun too
Question:	will it work on a 9.2 battery
Answer:	Only if it fits the chemical NiMH. 9.2 seems not to be NiMH. 7.2 8.4 9.6 (1.2 steps)
Question:	How long does it take to charge a 9.6v battery
Answer:	For me it was 3 hours+ but that is typical standard for a battery of higher voltage and the charger still works like a charm, if you're worried about it just charge it overnight.

• Independent Battery Charger - EBL universal LCD AA AAA C D battery charger, independent charging channels, 8 bays for 1/2/3...7/8 pieces AA/AAA Ni-Mh rechargeable batteries or 4 slots for 1/2/3/4 pieces C/D Ni-MH rechargeable batteries.
• LCD Display Rechargeable Charger- Rechargeable AA AAA C D Battery charger with smart LCD screen indicates the whole charging process for the AA AAA batteries and C D rechargeable batteries. "CHG" indicates charging. "ERROR" indicates battery damaged or installation error, support battery repair function.
• Fast Battery charger: USB 5V/2A and Type C Input, backup input port, improves your charger more adaptability, give you more choices to fulfill your batteries, saving the long waiting time for charging. （Please use 2.0A Adapter ONLY, Adapter not included. For Free Adapter, Please go to PROMOTION)
• Safety Guarantee - Advanced MCU control and -∆V function, over-heat and over-current protection, short-circuit protection, non-rechargeable and defective battery detection.
• Intelligent control - Latest battery detection technology, automatically turn to trickle charge when batteries are nearly full charged.

User questions & answers

Question:	Can this charge 2 D batteries at once
Answer:	I found a trick online that RESTORED ALL MY BATTERIES. It looks like magic but it worked for me on 8 batteries. You can google it and find the videos. Basically: find two short wires. Connect a bad battery with a good battery for 3-4 seconds (male to male, female to female). This will resurrect the bad battery but drain the good one. Now charge them both. Again, this trick salvaged 8 batteries I already put for recycling.
Question:	Will this charge lir123a batteries
Answer:	You don't need to charge in pairs, you can charge one battery.
Question:	Will this charge 6 D batteries at the same time
Answer:	Mine is more than 24hrs but its still on one bar of charging my C batteries😤
Question:	Will this charge all types of batteries (not just ebl
Answer:	I cannot get this device to charge EBL 9V NiMH batteries. I tried 2 of them and the red light inside the charger lights up, but no charging, no voltage occurs. This is an EBL charger and EBL batteries! The charger will charge other EBL batteries like AAAs and AAs. Is it defective?

Product features

EBL LCD Universal Battery Charger for AA AAA C D Rechargeable Batteries with Type C Input, AA AAA Battery Charger

EBL, since 1998, professional on batteries and chargers for more than 20 years.

EBL always persistently providing high quality products for everyone.

Compatible with

EBL-C9008TC can charge 8 pieces of AA/AAA Ni-MH batteries or 4 pieces of C/D Ni-MH batteries freely.

Both types of batteries can be charged at the same time.

Working Environment Condition

Working temperature: 0℃ - 35℃

Storage temperature: -10℃ -50℃

Surface temperature of Charger: 35℃-80℃

Surface temperature of Battery: 25℃-60℃

• Warm Tips: Go to Promotion to Get a USB Adapter

Super Fast Charging Technology

Specfication:

Input: DC 5V 2A(Micro USB/Type-C)

Output: DC 1.2V 1800mA(D/C 1800mA AA/AAA 900mA)

1Pcs AA/AAA/C/D Ni-MH Batteries Charging Time Cable:

(Charging faster than other name-brand LCD Charger)

AAA 800-1100mAh: 0.8-1.2 hours

AA 2300-2800mAh: 2.5-3 hours

C 5000mAh: 2.7 hours

D 10000mAh: 5.5 hours

Adopt super fast charging technology, （NOTE: Fit for 2.0A adapter only, DO NOT use 1.0A adapter. For Wall Adapter, Please go to PROMOTION）save your time and save your batteries' life.

Screen Protector

The Screen Protector film protects the screen from scratch during transportation.

You can choose remove it or not as they liked.

It will help our items far away from scratches better and make sure what customer got are brand new!

Upgraded Independent Cycle Tech

The Battery Charger can charge 1-8 Ni-MH/Ni-CD AAA/AA rechargeable batteries or 1-4 Ni-MH/Ni-CD C/D rechargeable batteries respectively.

Every Slot has their own cycle, you will never worry about having to find two Low-power batteries for charging.

Intelligent Auto-detection Technology

Our Charger can Intelligently auto-detect batteries' status.

Faulty or Incompatible battery will be indicated by LCD display with "ERROR".

Two Charging Ways - More Convenient

USER-FRIENDLY DESIGN!

Plus one more Type C input port on charger. More User friendly!

It improves your charger more adaptability.

This design gives you more choices to fulfill your batteries.

Help you avoiding the awkward situation, if one type USB cable isn't with you, just find another cable and charge your batteries!

Product description

Charging time:

1-8 pcs 2100mAh AA recharger batteries:It takes about 10 hours to fully charge

1-8 pcs 1000mAh AAA recharger batteries: It takes about 4.8 hours to fully charge



Input:DC 5V 2A

Output:1.4V 250mA



Precautions:1. It is forbidden to charge the battery that is not rechargeable. 2. Please ensure the battery installed is correct: make the +/- pole of the battery is match for the +/- pole of the charger 3. Keep the charger in an empty Place when charging



Package:1 x POWEROWL battery charger

1 x user manual

1 x Micro USB charging cable(No AC plug)

• POWEROWL smart charger passed US safety certification comes with chip control, when the battery is fully charged, it will automatically stop charging, and with LED indicator
• Scientific and reasonable battery charging position design, high quality materials effectively protect the battery from normal charging
• Charge any number of AA AAA rechargeable batteries to make your charging easier
• With a USB input interface, you can use a laptop, car charger, mobile phone charger, etc. to charge the battery
• AA AAA batteries charger uses trickle charge to extend battery life and charge up to 99%

User questions & answers

Question:	This charger input 220v
Answer:	This kit is manufactured in China.
Question:	Can you charge any brand
Answer:	DCB115 is what came in my package; which is a great charger.
Question:	Can this charger charge duracell and energizer rechargeable batteries or does it only charge powerall rechargeable batteries
Answer:	Yes, you may use any DEWALT 20V battery with this charger.
Question:	What does it mean that you shouldn’t charge pairs? Does it mean don’t charge just 2 at once? I thought you could charge any number of batteries
Answer:	It's 1 battery, 1 charger that charges only 1 battery, and a bag.

• Ideal AEG battery power - Fits popular models of airsoft guns like M4, Crane Stock, M110, SR25, M249, M240B G36, M14, RPK, PKM, L85, AUG, G3, G36C, M4A1-RIS, M4A1, CAR15, MP5A5, MC51, FNP90, AUGRT, AUGM, G3A4, G36, STEYR. For use in ERA002, ERA004, ERICS13, EROA002, EROA003, SDGE0507R2, SDGE0501R2, upgraded and/or modified AEGs, we recommend measuring the gun compartment for best fit.
• Trusted performance - The Tenergy 9.6V NiMH battery pack features rapid charge up, with high capacity rating of 1600mAh that provide more playtime for your airsoft rifles.
• Advanced protections - The smart battery charger includes reverse polarity protection, short circuit protection, and over-charge protection. (Note: This charger is only for recharge for NiMH batteries, do not charge for LiPO batteries.)
• Hobby battery charger - Tenergy intelligent battery charger is great for most popular airsoft guns and RC hobbies batteries because it has a standard size Tamiya connector and a standard to mini Tamiya adapter. Works great for any 8.4V or 9.6V NiMH battery packs in airsoft, RC cars/airplanes that use a standard or mini Tamiya connector.
• Compact dimensions - Our electric airsoft guns battery is designed from 2/3A NiMH battery cells, stick shape butterfly battery dimensions are: 20mm (diameter) with 117mm (length) and 20mm (diameter) with 117mm (length) and can fit most airsoft guns. The charger has standard size and mini Tamiya connector for 8.4V-9.6V batteries. Buy with confidence, your charger includes a 12-month warranty.

User questions & answers

Question:	Does it come with a charger
Answer:	You may either select just the battery or battery and charger combo. Battery is 17 combo is 32
Question:	When I use this battery the charge only last around 10 seconds why is that
Answer:	Did you use a smart charger or a standard wall charger? Because using a smart charger will ensure that it charges better
Question:	how long do you think it will take to ship to south carolina
Answer:	2-3 days as long as order is placed prior to 3:00 pm eastern during Monday thru Friday.
Question:	Will this fit the G&G FN SCAR-L CQB AEG
Answer:	Yes but will be very tight. If cables are packed in just right wint get all stock to collapse all the back in. With the SCARs I would only run a 9.6.

Product description

The Traxxas 2984 charger/battery completer pack contains a powerful #2926x 8.4V 3000Mah NiMH hump pack battery and a #2969 2-amp AC wall charger. The AC 2-amp NiMH fast charger uses a wall outlet to charge your 5-7 Cell (6 - 8.4V) NiMH batteries quickly and efficiently. The powerful 2-amp output makes quick work of charging and a status LED informs you when your charging is complete. The 2969 charger is for NiMH batteries only and should never be used to charge lipo batteries. Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. This product is made from high quality materials and designed for long-lasting performance. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.

• Charger/battery completer pack contains a powerful #2926x 8.4V 3000Mah NiMH hump pack battery and a #2969 2-amp AC wall charger
• Powerful 8.4-Volt battery provides powerful acceleration and high speeds while the large 3000Mah Capacity provides long run times
• Powerful 2-amp charger output is up to 10x faster than trickle Chargers and makes quick work of charging
• Charger features LED status light and charges 6-volt up to 8.4-Volt NiMH batteries only (not compatible with LiPo batteries)
• LiPo batteries max out the potential of 1/10 scale vehicles like Slash, E-Revo, Summit, Spartan, and M41 with powerful acceleration and long run times

User questions & answers

Question:	Does it work with slash 4x
Answer:	Yes it will.
Question:	This battery suitable for Traxxas e revo vxl
Answer:	no, it is is too big for 1/16
Question:	How long does the battery last
Answer:	Depends on what vehicle you are using it in and how you are driving, 10 - 15 minutes is probably average.
Question:	Are you supposed to remove plastic wrap around the battery
Answer:	No do not remove the plastic wrapped around the batteries.

• Multi-Function: This charger cannot charge 1.5V batteries. Independent charging slot. It can random charge up to 4 batteries of 1.2V AA/AAA/C/D size, or 2 batteries of 9V Ni-MH/Ni-CD rechargeable batteries at the same time. One battery charged at one time is workable
• LCD Display: You can observe the charging process of the batteries directly & clearly through the LCD and the LED is only for 9V li-ion Battery, please note the LED will be light all the time when charging Ni-MH 9V battery （Whether the batteries are fully charged or not）and LED will be turn off when charge 9V li-ionbattery are finished. The charging time depend on the capacity of the battery.
• Super Rapid Charging Time: Charging the battery AA/AAA/C/D with the current 1A, making charging 5 times faster than the normal one. Less than 5 hours to fully charged the AA/AAA/C/D batteries, and less than 12 hours to fully charged the 9V batteries
• Smart Switch & Clamshell Cover Design: Press the discharge button to discharge the battery, and the charger will restore to charging mode when discharging is completed; Special clamshell cover design can well protect children and the old from danger, also prevent the interference from the outside environment when charging
• Over Temperature Protection: This battery charger will automatically power off when the battery's or charger's temperature exceeds 60℃. No need to guard and can ensure security anytime.

User questions & answers

Question:	I did not receive an instruction sheet with the charger, but the label on the bottom says: "the lcd will be on and show its background color for 2 sec
Answer:
Question:	What batteries do i need to buy to use with this device? will amazon basics work
Answer:
Question:	Can you use different brands of rechargeable batteries for this
Answer:
Question:	can i charge just one battrie
Answer:

Product features

Bonai LCD Universal Battery Charger

Notice：

This charger cannot charge 1.5V Lithium Batteries and 3.7v Lithium Batteries.

You can observe the charging process of the batteries directly & clearly through the LCD and the LED is only for 9V li-ion Battery, please note the LED will be light all the time when charging Ni-MH 9V battery （Whether the batteries are fully charged or not）and LED will be turn off when charge 9V li-ionbattery are finished. The charging time depend on the capacity of the battery.

Compatible Models:

Independent charging slot, can charge different compatible batteries freely.

For Ni-MH Ni-CD rechargeable batteries: 1/2/3/4 AA, AAA, C, D and 1/2 9V batteries.

Environment Conditions:

Using Environment: Temperature: 0-40℃; Humidity:≤85%

Storage Environment: Temperature: -10-40℃; Humidity:≤60%

Work Temperature:

Surface temperature of charger≤60℃

Surface temperature of battery≤45℃

• SAVE TIME & CHARGE MORE - The Tenergy TN160 1.2V AA, AAA smart battery charger offers 12 different channels allowing you to charge any combination of AA/AAA NIMH/NiCd rechargeable cells. Eliminate the need for multiple household AA/AAA battery chargers.
• LARGE LCD SCREENS - The easy-to-read LCD panel on this AA/AAA battery recharger displays the charging/discharging status of each individual battery.
• SMART CHARGE TECH - Built-in Smart Technology provides full protection against overcharge, overheating, short circuit, over-current, and reverse-polarity on the Tenergy NiMH/NiCd battery charger. Additionally, the eight hours safety protection will help save energy and maintain battery life.
• OPTIONAL REFRESH CYCLE - Tenergy TN160 12 slots rechargeable AA/AAA batteries charger features easy to use cycling feature fully discharges and charges your cells to extend their overall lifespan and performance.
• ON-THE-GO CHARGING - We included a worldwide 100~240V AC adapter make this a smart charger for AA/AAA batteries. Buy with confidence, the charger features CE, CEC, FCC certification and also includes a 12-month warranty.

User questions & answers

Question:	Why when I insert batteries to charge I see on the monitor-"Error
Answer:	There can be various reasons for this: Are you using *rechargeable* batteries? Are the batteries inserted fully into the slots? Are the batteries inserted with the correct polarity? ...i.e. wth the top of the battery inserted into the "+" slot. Since I cannot actually SEE what you are doing, this is the best that I can offer. Bottom line: this device took very long (as much as 12 hours to recharge), so I gave it away, as it was too late to return for refund or exchange.
Question:	Charger is new and does not appear to charge the batteries.Have put batteries in for hours.There is no read out to indicate charging and no results
Answer:	There is a visual on the screen. When you insert the batteries, make sure they have good contact with the charger by wiggling them. Once they begin to charge the screen will show the image of a battery progressively being filled (three segmented bars). When a battery is completely charged, the screen shows the same battery, but full
Question:	will this work with panasonic eneloop pro AA and AAA batteries
Answer:	We've been using ours for a variety of different battery types in AA and AAA sizes, and they seem to be getting the charges they need so far. We've been using them in 2 way radios.
Question:	Can this charger charge 12 AA batteries at once or only 6 AA and 6 AAA at once
Answer:	12 AA at the same time. I never charge AAA batteries in mine, but I'm sure I could.