14 best niles audio speaker selectors
Niles Audio is a well-known brand in the realm of audio and home entertainment. They offer a range of speaker selectors and distribution systems designed to enhance audio experiences in both residential and commercial settings. Here's what you should know about Niles Audio speaker selectors:
Audio Distribution: Niles Audio speaker selectors are primarily used for distributing audio from a single source to multiple speaker zones throughout a building. This allows users to listen to music or other audio content in different rooms simultaneously or independently.
Multi-Zone Systems: Niles Audio provides speaker selector products that support various zones or rooms, allowing users to control the audio in each zone individually. This is commonly used in multi-room audio setups in homes and commercial spaces.
Speaker Impedance Protection: Niles Audio speaker selectors often feature impedance-matching technology.This helps protect the amplifier from the load created by multiple speakers, ensuring optimal audio performance and preventing damage to the system.
Volume Control: Some models may include volume control options for each zone, enabling users to adjust the volume in different areas of their space without needing to access the main amplifier.
Automatic Protection Circuits: Niles Audio's advanced speaker selectors are equipped with automatic protection circuits that safeguard the connected speakers and the amplifier in case of overloads or short circuits.
A/B Switching: Certain Niles Audio models offer A/B switching capability, allowing users to select between two different audio sources for a specific zone or room.
Construction and Design: Niles Audio speaker selectors are typically built to high standards, featuring sturdy and durable construction. They are designed to fit seamlessly into audio racks or custom installations.
Compatibility: These speaker selectors are compatible with various types of speakers, including in-wall, in-ceiling, and outdoor speakers, making them versatile for different installation scenarios.
Custom Installations: Niles Audio products are often favored by professional installers for custom audio systems in homes, restaurants, and other commercial establishments.
Accessories: Niles Audio provides accessories and components such as volume controls, IR repeaters, and wall plates to complement their speaker selector systems.
Niles Audio is recognized for its commitment to delivering high-quality audio distribution solutions. Whether you are setting up a multi-room audio system in your home or creating a complex audio distribution system for a commercial space, their speaker selectors and distribution products are designed to provide reliable and customizable solutions for your audio needs.
Below you can find our editor's choice of the best niles audio speaker selectors on the market
Niles SSVC-6 Speaker Selector, Color
Niles
Product description
The Niles name is synonymous with premier whole home audio solutions. For nearly four decades, Niles has delivered innovative products that enable simple and easy access to home entertainment, and we are now creating audio solutions that seamlessly integrate with lighting and climate control.
- Power Handling: 100 Watts Per Channel RMS; 200 Watts Peak
- Selectable Impedance Magnification For 1, 2, 3/4, 5/6 Pairs Of Speakers
- Individual Room On/off Selector Switches
- 12-step Controls; 54dB Maximum Attenuation
- Removable screwless connectors accommodate up to 12-gauge wire
- Accommodates 6 pairs of speakers
- Power handling - 100 watts per channel RMS; 200 watts peak
User questions & answers
| Question: | Can this selectror control volume |
| Answer: | Hi, Each speaker will have its own volume control independently. Will ship right away. Please order. Thanks. |
| Question: | Is this speaker switch temperature sensitive i.e. can I set one up in my attic and would possible temperature fluctuations affect its functionality |
| Answer: | The unit isn't much more than switches and potentiometers, so I don't think it would be sensitive to ambient temperature unless the temperatures encountered were EXTREME. As the other reviewer noted, your primary concern with an attic set-up would be accessibility. The whole point of the selector is to control a distributed audio system, so if you couldn't get to it easily it would be a waste of effort. I am very pleased with my selector. It works as advertised in my system and has never given me any trouble. |
| Question: | I have receiver ( sony strdh750 7.2 channel 4k av receiver) by what channel should i go to this speaker selector, i have center, front a, etc |
| Answer: | Hi,Unless you have speaker A and B selection on your Sony. Otherwise i wouldn't suggest you taking the main channel to speaker switcher. Thx. |
| Question: | Could this be used for 3 different speaker zones inside and 3 more outside with volume control for each zone? Using a Sonos amp |
| Answer: | I have to disagree with this answer. I have two of these units and they do control 6 pairs of speakers, this equals 12 total, not 6. Again the Niles SSVC 6 will control 12 speakers in pairs of two for right and left channel. It does have volume control as well as on/off control for each of the 6 pairs. This unit includes labels for each zone. It does send equal signal to each speaker set to balance out the ohm load on your amp or receiver to prevent over load. |
Niles SS-6 Speaker Selector
Niles
Product description
Niles SS-6 speaker selector
- Niles SS-6 speaker selector
- Protection circuit safeguards receiver/amplifier
- Separate left and right ground paths for compatibility with all amplifiers
- Removable connectors accommodate up to 14-gauge wire
- 10 year limited
- Handles up to 100 watts per channel RMS
- Protection circuit safeguards receiver / amplifier
User questions & answers
| Question: | Can this model handle 8-ohm speakers? Niles' website states that 4-ohm speakers should be used |
| Answer: | i used 8 ohm speakers. didn't realize there was a recommendation. |
| Question: | Could I run 5 surround sound speakers from my living room plus 4-6 other speakers throughout the house through this selector and my receiver |
| Answer: | If you are talking about using the Zone 2 on your receiver to power 4-6 other speakers you could but it would not be the best thing to do. one thing you have to make sure is that your speakers all have the same Ohm rating and that your receiver is capable with that that certain resistance. You would probably be safe with running 2 pairs of speakers but I would definitely not do 3 pairs. I would look into a 4 zone amplifier for that. Hope this helps! |
| Question: | I have a sonos amp and 8 ceiling speakers. Dont know the ohms of the speaker. Will this work |
| Answer: | It should work,range of ohms for niles 2-16 ohms it will match your 4 sets of speakers fine. |
| Question: | How does it connect from the receiver if your "outs" are only plugs |
| Answer: | The plugs (1-zone Each) have (4-each) set-screws with holes for 2 Pos & 2 Neg each speaker wires from receiver, or Amp SPEAKER output |
Niles SS-4 Speaker Selector
Niles
Product description
Niles SS-4 speaker selector
- Niles SS-4 speaker selector
- Separate left and right ground paths for compatibility with all amplifiers, including Bridged designs
- Removable Screwless connectors accommodate up to 14-gauge wire. Rugged all metal chassis construction.
- Non-skid feet won't scratch furniture and ensure unit stability during operation 72 adhesive-backed room identification labels requires an amplifier that is compatible with a 4 Ohm load
- 10 year limited
- Handles up to 100 watts per channel RMS
- Protection circuit safeguards receiver / amplifier
User questions & answers
| Question: | My amplifier is capable of one pair of 4 ohms load. Can I use this to connect 2 pairs of speakers, each pair are 4 ohms load |
| Answer: | No |
| Question: | watts per channel handling.—Does this mean the input can only be 100 watts or that her output can be 100 watts per channel from 400 watt source |
| Answer: | It means that the maximum input can be 100 watts per channel. Now if you have a 400 watt amplifier, it can still work as long as you don't crank it up past 100 watts output. |
| Question: | I have a receiver Denon E400 that has 175W per channel, worked well with these speaker selector |
| Answer: | What matters is the impedance. Most Amps are 8 ohm as are speakers. When you hook multiple speakers in parallel the impedance goes down. The selector ensures that the impedance is at least 4 ohms even when as many as eight speakers are hooked in parallel (and would otherwise present 1 ohm of impedance). On my Yamaha receiver there is a switch that allows for a 4 ohm load and that is the key. You can probably run a 4 ohm load from an 8 ohm driver, it just means that more energy is dissipated in the amp than in the speakers but hopefully not so much as to do damage |
| Question: | Can I control volumes on two different speakers independently with this device |
| Answer: | No, there's no volumes controller on this device. You need a controller like ''Niles VCS100R White FG00956 100 Watt InWall Volume Control " (http://www.amazon.com/Niles-VCS100R-White-FG00956-Control/dp/B0001W1I58/ref=pd_sim_e_3) for each pair of speakers. |
Niles SSVC-2 Speaker Selector
Niles
Product description
Niles SSVC-2 speaker selector
- Niles SSVC-2 speaker selector
- Selectable impedance magnification for 1, 2, 3/4, 5/6 pairs of speakers
- Individual room on/off selector switches
- 12-Step controls; 54dB maximum attenuation
- 10 year limited
- Accommodates two pairs of speakers
- Power handling - 100 watts per channel RMS; 200 watts peak
User questions & answers
| Question: | I have a pair of 8-ohm (advent) and a pair of 4-ohm (ads) speakers. can i play both of them concurrently through my relatively new yamaha amp |
| Answer: | I am not sure what your question is. The input for this switch is your amplifier whose output is 8 ohms. You can connect a set of 4 ohm speakers to be controlled by the switch-gear. The switch-gear will always be sure that the amplifier never experiences anything greater than an 8 ohm load. This is very important as you would burn out your amplifier. I have a pair of Bose 4 ohm, a pair of Marantz Imperial 7, 8 ohm and a Yamaha speaker bar all powered from one channel of my amplifier. If you are in doubt about what your amplifier and switch-gear can handle, contact the technical help line for Niles (800-289-4434.) I did speak with their technical rep prior to connecting my reference quality amplifier to ensure that no harm would be done. Better yet, you can download the manual as it explains amplifier load factors. In my opinion, this is the best speaker selector. |
| Question: | Can I connect a pair of 4-ohm and a pair of 8-ohm speakers |
| Answer: | Yes. |
| Question: | My yamaha receiver has a&b connections. can i run one set of speakers to a and niles to b and listen to 3 sets of speakers at the same time |
| Answer: | Waqar,The dimensions of the products are as follows: 17"W x 2-1/16"H x 8-5/8"DYou can assume there will be 1"-2" of packaging materials and original display box.I hope this information helps!Mark P.iElectronics |
| Question: | what is the best amp to get for this product? I know it has to be at least a 4ohm |
| Answer: | They’re small little inset screws that probably aren’t too hard to find. I didn’t have too much trouble with the screw stripping but more difficulty getting enough bite to hold the wires securely. |
Niles HPS-4 Speaker Selector
Niles
Product description
Four-pair high-power speaker selector; packaged for retail display.Niles is focused on providing high-quality products that integrate and distribute home entertainment for the residential and commercial markets. Niles has played a major role in transforming whole-house audio/video and home theater.
- Power handling: 250 watts per Channel RMS protection circuit safeguards receiver/amplifier
- Separate left and right ground paths for compatibility with all amplifiersrear-panel switch for constant or selectable impedance protection
- Removable connectors accommodate up to 12-gauge wire rugged all metal chassis construction
- Non-skid feet won't scratch furniture and ensure unit stability during operation72 adhesive-backed room identification labels
- 10 year limited
- Handles up to an awesome 250 watts per channel RMS
- Protection circuit safeguards receiver / amplifier
User questions & answers
| Question: | Can this switch 4 amps into one set of speakers |
| Answer: | I just finished install of mine to switch between a Rogue tube amp and my Denon AVR. I cannot tell any degradation in sound quality. I used the largest wire that would insert into the terminal strip of the switch and kept the wiring as short as possible I routed the wire through a speaker switch as well so I could use heavier speaker wire and bi-wire to my Vandersteen speakers. The terminal strip on the switch would not have accommodated the wiring I currently used with the speakers. |
| Question: | I notice it mention's having seperate "ground paths". My question is will this work properly with a fully balanced amplifier? Both + and - active |
| Answer: | Use pin style plugs. Search for the product in Amazon, see example below. 4 pins total Hi-end Copper Speaker Plugs / Pin Screw Type Plug with Heat Shrink Tubing Wv-spcpps2 Conwork 4-Pair 2mm Banana Plug Screw Type Audio Speaker Cable Connector Copper Gold Plated |
| Question: | what is the shipping carton dimensions |
| Answer: | There may be some bleed thru of current but, it is minimal and should not damage your amp. I use this unit with a 250 watt solid state amp and a tube amp. |
Niles SSVC-4 Speaker Selector, Black
Niles
Product description
Niles SSVC-4 speaker selector, black
- Power Handling: 100 Watts Per Channel RMS; 200 Watts Peak. Separate left and right ground paths for compatibility with all amplifiers
- Selectable Impedance Magnification For 1, 2, 3/4, 5/6 Pairs Of Speakers
- Individual Room On/off Selector Switches
- 12-step Controls; 54dB Maximum Attenuation
- 10 year limited
- Accommodates 4 pairs of speakers
- Power handling - 100 watts per channel RMS; 200 watts peak
User questions & answers
| Question: | Can this switch be run "in reverse"? (four amplifiers to one pair of speakers by being careful to have only one circuit at a time "on |
| Answer: | That sounds kind of sketchy I would not try it. Running this in reverse is not worth the damage it may cause. |
| Question: | How does this nile compare to osd for the same item |
| Answer: | What do you mean by osd? |
| Question: | Can I stack my Yamaha 6750 amp/receiver on top of this speaker selector |
| Answer: | Yes, but it will get a little warm. I originally put the speaker selector on top of the receiver and that was worse - the receiver would shut down after about 5 minutes.I now have the speaker selector on a separate shelf with my DVD player on top of it. |
| Question: | The description says black, but the pic is grey. so what is it |
| Answer: | This picture is badly shot. The unit is Black. |
Niles DPS1 Black (FG00003) Amplifier/Speaker A-B Selector
Product description
Amplifier / speaker A-B selector
- Black
- Enables you to play either of 2 amplifiers through a shared pair of loudspeakers
- Power handling - 350 watts per channel
- Connectors accommodate up to 14 gauge wire
- Table-top unit
User questions & answers
| Question: | Are the (easily stripped) screws securing each wire replaceable |
| Answer: | yes |
| Question: | Does using a switcher degrades sound quality, comparing to speakers directly connected to an amp |
| Answer: | Around 3-4 hours. I extend that when stationary using a USB C power bank. |
| Question: | Will this unit receive banana plug speaker wire terminators |
| Answer: | La bocina tiene 16w, suena muy bien. Alta fidelidad y resistencia..Saludos |
| Question: | Some Amps tend to still push power even when power swich is turned off. If this happends, does this swich have protection so I dont fry my other amp when switching |
| Answer: | The LG IPX7 Water Resistant Portable Bluetooth Speaker with Meridian Technology, Model # PK3 has a microphone on it that can be used with voice commands from Google Assistant, Google Now etc., or Siri on your smartphone. It cannot be used to communicate with Amazon Alexa devices...^IFV |
Niles SI-1650 16-Channel Fully-Configurable Power Amplifier - Black
Niles
Product description
IP Configurable EQ Adjustment, Volume Level and High/Low Pass SelectionWith the convenient web based IP Configuration utility you can easily provide independent EQ adjustments and volume levels to each individal amplifier or make adjustments to entire speaker groups. A High/Low Pass Filter setting for each channel accommodates passive subwoofers and small full range speakers. Installers can now acoustically optimize each speaker for both its type and individual location using a web browser connected via WiFi.
Real World PowerThe Sl–1650 is a 16–channel amplifier that delivers a solid 50 watts per channel RMS into 8 ohms and 100 watts per channel RMS into 4 ohms. A dual digital power supply with a massive toroidal transformer provides the energy necessary to efficiently deliver solid, deep, controlled bass response to a house full of speakers.
Sixteen to Eight Channel Configurable PowerWant more power in a single zone or larger room? Each of the Sl–1650's eight adjacent speaker output pairs are configurable into a single high power output. Using the web based IP configuration utility, you can create up to eight 100 watt channels enabling the allocation of greater power to specific locations, such as more great room or outdoor applications.
IP Configurable BusMatrix SelectorA web based IP configuration utility provides control of the BusMatrix selector giving you the flexibility to assign each speaker channel to any of the sixteen signal inputs. Adjacent signal input pairs can also be combined and assigned to a speaker channel for mono sound applications. With BusMatrix, routing surround sound to the master bedroom, stereo to the den and mono to the powder room is as simple as flicking a switch. BusMatrix makes the Sl–1650 an ideal multi–room or multi–zone amplifier and offers exciting new features and system design possibilities to the professional installer.
- Fully Configurable 16-Channel Amplifier 50 Watts RMS Per Channel Into 8 Ohms 100 Watts RMS Per Channel Into 4 Ohms High Power Mode Configures Amplifier To 8 Channels X 100 Watts RMS Into 8 Ohms
- Auto Switching 110V-230V Power Supply Unique Web Browser Configuration Allows Each Channel To Select From Any Of 16 Inputs Or Combination Of Inputs IP Web-based Configurable EQ Adjustment, Volume Level And High/low Pass Selection Three Turn-on Modes: Music Sense, Voltage Trigger, And Manual
- Audio Circuitry Constructed With The Finest Parts Available, Including 1% Metal Film Resistors, High Quality Capacitors And Oversized Heat Sinks For Clear And Uncolored Sound Independent Thermal And Short Circuit Protection On Each Channel Status Display For Troubleshooting
- Voltage Trigger Input Accepts 3-24VAC/DC 12-volt Control Out Removable Line Cord Rack Mount Ears Included
- Tested And Certified To US, Canada, EU , And Australian Safety And EMC Standards Overall Dimensions: 17.25" (43.81cm) Wide ? 5.75" (14.47cm) High (including Feet) 16.25" (41.11cm) Deep Weight: 35 Lb. (15.8 Kg)
User questions & answers
| Question: | Can i set it up whit Alexa |
| Answer: | you need a sterio Reciever you hook up main speakers from sterio to main of the unit then hook speakers to multiple new unit. |
| Question: | who can help me set this up |
| Answer: | This amp have 16 input rca and 16 output rca, output for subwoofer not available, but if configure via web-interface output for subwoofer frequency, i think you can connect subwoofer |
| Question: | Does this unit have an output for a powered sub-woofer ( i believe it's an rca connection |
| Answer: | Dear Martha,Yes you may definitely use it around the eyes even the most sensitive eyes. It is even recommended, since this delicate area benefits greatly from these ingredients.Dr Sivak, our scientist says that it works wonders on the eyelids too.We recommend taking photos and then comparing after one month, two, six months after consistent use. |
Niles VCS100K Volume Control
Niles
Product description
Niles VCS100K volume control
- Niles VCS100K volume control
- Make-before-break switch design delivers 12-step, pop-free control for a wide range of listening volumes
- Premium-quality parts and construction ensure high-fidelity sound, 100W continuous power handling with flat frequency response (+/- 1.2dB)
- Includes designer-approved screw less wall plates in four colors to blend seamlessly into any decor and accommodates standard one-gang electrical boxes
- Ten-year limited parts-and-labor warranty
User questions & answers
| Question: | At church I have 2 front facing speakers + a monitor in back for choir. Monitor's wired to the left front speaker. Can this control the monitor vol |
| Answer: | white |
| Question: | For install 1 pair of speakers (8 ohm). On what position should be the little switch that is in front of the vol control. 8x, 4x, 2x and 1k |
| Answer: | It is not meant to operate that way. You need something like this. https://www.amazon.com/SVC405-Impedance-Matching-Theater-Switchable/dp/B003BKZ2DG/ref=sr_1_14?ie=UTF8&qid=1548858722&sr=8-14&keywords=dual+source+speaker+selector |
| Question: | How do I used the 1x,4x8x switch on the side of this thing? I am hooking up 5 pairs of 8ohm speakers to the receiver |
| Answer: | Two individual speakers, not two sets of stereo speakers. Bummer. |
| Question: | When I have the volume turned down very low, I can hear distorted music/popping coming from this module inside of the wall. Is this normal |
| Answer: | yes it has left and right input feeds for stero volumr control |
OSD 6 Zones Speaker Selector w/Volume Control 300W Impedance Matching Dual Input On/Off SSVC6
OSD Audio
- SOUND QUALITY: The audio stays at a consistent quality with the SSVC6D to manage your speakers with volume controls to raise or lower the volume of each listening zone for perfect sound.
- IMPEDANCE PROTECTION: Impedance-matching frequency protection circuitry allows one amplifier to safely power multiple pairs of speakers without your amp or receiver overheating or damaging to the equipment.
- POWER: This speaker selector allows you to distribute an amplified signal for up to six zones throughout the house, letting you choose which source is playing in each designated zone.
- DESIGN: Front mounted master a/b switches are dual source for each separate zone to conveniently input and switch from one music source to another with on and off buttons.
- EASY INSTALLATION: The SSVC6D includes a removable phoenix connectors that accept up to a 14 gauge speaker cable to avoid frustration when connecting multiple speakers.
User questions & answers
| Question: | Can you tell me what the warranty is on this product |
| Answer: | This is just a simple switch - there are no delay elements in it. If you are experiencing echo, reverb, or feedback, the problem must be somewhere else in your setup. |
| Question: | Can I connect this to my receiver via bluetooth |
| Answer: | This won’t do what you’re trying to accomplish. This is a brilliant, yet simple, A/B switch. I use A for my PC audio out and B for my cell audio out to one set of headphones. |
| Question: | what is the maximum continuous amplifier power for which this product is compatible? The SSVC6 says 300W, but I can't find a spec for this one. THXS |
| Answer: | Short answer: Yes. Longer answer: You had me curious as to the answer, so I just hooked mine up the way you describe. I connected one PC going INTO the front headphones-out port, and another PC going INTO the speaker-out in the rear. Then I hooked up my speakers to INPUT B, and my headphones to INPUT A. That turned the A/B switch into an output selector and the front switch into an input selector. Everything worked fine, but for the completeness of the answer, I have to point out that the first time I connected things this way I got a 60Hz hum in my speakers, but disconnecting and reconnecting fixed that problem. I tested the speaker, volume, mic, and mute functionality, and they all worked well. Again, for the completeness of this answer, if I connect my Dell G7 laptop to a Type-C docking station (handling the audio, too), and the docking station connects to the Nobsound, and my headphones (with mic) are plugged into the Nobsound's headphones-out, then the laptop doesn't detect my headphones' mic. But that doesn't really bear on the answer you are looking for ( it's probably just a config I haven't sussed out yet); it's just something to be aware of. |
| Question: | What do I need to look for in a receiver to pair with this volume control selectors |
| Answer: | While you can connect up to four pairs of speakers, this device will not work as a surround sound device like having front, rear, center channels like a Dolby or DTS system. This only splits a stereo signal to multiple pairs of the same exact stereo signal.Hopefully this helps. |
Product features
Dual sourcec
The dual source allows you to have 2 different music sources connected, with some units offering the ability to select source per zone.
Volume Control
Using the same technology as our in-wall volume controls, most units offer volume control per zone.
Impedance Protection
Impedance protection allows a single amplifier to safely power several pairs of speakers without going below the amp’s impedance rating.
Easy to Install
Removable input/output phoenix connectors accept up to 14g wire and provide hassle-free hook-up.
OSD Audio 6-Zone Dual Source Speaker Selector
The SSVC6 speaker selector lets you add up to six speaker pairs around your house with individual volume controls for each speaker pair. Features removable input-output connector blocks for easy, yet secure wiring. Full impedance protection to protect your amplifier from low impedance when multiple speaker pairs are selected.
Premium New and Improved 4 Zone Channel Speaker Switch Selector Volume Control Switch Box Hub Distribution Box for Multi Channel High Powered Amplifier Control 4 Pairs Of speakers - Pyle PSPVC4
Pyle
Product description
Up to 4 Separate Speaker Pairs to your Stereo System Accepts Speaker Wires Up to 14- Gauge Handles 100Watts Per Channel with Speaker Systems that have a Minimum Impedance of 8 Ohms Protection Circuitry Keeps it Running Smoothly Individual Speaker Volume Control Support Two Stereo Amplifiers Frequency Response: 20Hz-20KHz Dimensions: 16.92''(W) x 3.03''(H) x 6.29''(D) Sold as: Unit Weight: 9.32 lbs. This speaker selector box allows you to play audio to up to four different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch and an independent volume control. You can also hook up another amplifier. Protection circuitry keeps it running smoothly. Accepts speaker wires up to 14 gauge.
- BEST PERFORMANCE SPEAKER SWITCH WITH VOLUME CONTROL:The new and Improved Multi Channel stereo speaker selector with volume control can control the volume and select what speaker you want to play without have to go to the amplifier each time.
- CONTROL POWERED 4 CHANNEL AMPLIFIER: With the 4-channel a/b/c/d speaker selector w/ volume control You Can Control the volume and Switch on of each speaker or play all speakers at the same time.From and high power and low powered stereo amplifiers
- PLAY ANY COMBINATION SETS OF SPEAKERS AT ONCE.:The Pyle speaker switch box Volume Control Is great help for controlling ceiling speakers Wall Speakers home theater rooms monitor speaker loud speakers from all sizes 4 6 8 12 inch
- PLUG AND PLAY EASY INSTALL.The Pyle speaker distribution hub Is powered by your stereo - Just plug in the wires to Control any High Powered Amplifiers from Pyle Crown Denon Sony Panasonic Yamaha and Many More.Control 4 10 4 6 8 inch Speaker Box.Frequency Response: 20Hz-20KHz
- WORRY-FREE SHOPPING: With the Pyle multi speaker switch and Volume Control we are confident of the quality of our product, therefore, we offer a 30 day money back guarantee no questions asked.
User questions & answers
| Question: | Is this rack mountable |
| Answer: | Hi, no it is not mountable. However, you may customize your own rackmount. Thank you. |
| Question: | can I use this amp with my sony str 1030 reciever to add additional power |
| Answer: | This is not an amp. It takes an output to speakers and can run different sets of speakers. If you do not have enough power in your receiver to run the speakers it will not work. Each time you turn on a set of speakers it will drop the power by a percentage. Some receivers can not handle more then three sets. |
| Question: | Can one of the zones I hook to be a powered subwoofer (which itself feeds a pair of small speakers |
| Answer: | No you cannot hook up a powered sub woofer to a speaker selector |
| Question: | Will this work with an old devon dra 35v receiver from the mid 80s? i have 4 pairs of speakers and might need to use at least three pairs at a time |
| Answer: | I do not recognize the Receiver you are referring to but the connections are very simple. The speaker wires that are driving your speakers will be shortened and then connected to the Pyle Home speaker selector. Then your speakers will be connected to the Pyle Home speaker selector to each of the different four zones that you have in your home/office/whatever. I am presently driving three pairs of speakers with one zone unused. I have had perfect performance. |
Product features
Premium New and Improved 4 Zone Channel Speaker Switch Selector Volume Control Switch Box Hub Distribution Box
This speaker selector box allows you to play audio to up to four different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch and an independent volume control. You can also hook up another amplifier. Protection circuitry keeps it running smoothly. Accepts speaker wires up to 14 gauge.
- Up to 4 Separate Speaker Pairs to your Stereo System
- Accepts Speaker Wires Up to 14- Gauge
- Handles 100Watts Per Channel with Speaker Systems that have a Minimum Impedance of 8 Ohms
- Protection Circuitry Keeps it Running Smoothly
- Individual Speaker Volume Control
- Support Two Stereo Amplifiers
- Frequency Response: 20Hz-20KHz
- Dimensions: 16.92''(W) x 3.03''(H) x 6.29''(D)
Premium New and Improved 4 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box for Multi Channel High Powered Stereo Amplifier A/B/C/D Switches | 4 Pairs Of speakers - Pyle (PSS4), Black
Pyle
Product description
Premium New and Improved 4 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box for Multi Channel High Powered Stereo Amplifier A/B/C/D Switches 4 Pairs Of speakers - Pyle (PSS4) Product description (optional) : PyleHome Model : PSS44-Ch. Stereo Speaker Selector4 Channel High Power Stereo Speaker Selector Up to 4 Separate Speaker Pairs to Your Stereo System Accepts Speaker Wires up to 14-Gauge Handles 100Watts per Channel w/ Speaker Systems That Have Minimun Impedance of 8 Ohms Protection Circuitry Keeps It Running Smoothly Frequency Response: 20Hz-20KHz Dimensions: 7.48''(W) x 1.97''(H) x 4.72''(D) This speaker selector box allows you to play audio to up to four different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.
- THE NUMBER 1 SELLER 4 ZONE SPEAKER SELECTOR:The New and Improved Multi Zone Speaker Selector Can Play 4 Sets of Speaker at the Same Time or What Ever Speaker You Want to Control or a Pair of Speaker from High Powered Amplifiers
- CONTROL YOUR POWERED 4 CHANNEL AMPLIFIER:You Can Control Any Amplifier from Pyle Crown Denon Sony Panasonic Yamaha and Many More.also Control 4 10 4 6 8 Inch Speaker Box
- PLAY ANY COMBINATION SETS OF SPEAKERS AT ONCE.:The Pyle speaker switch box Is great help for controlling ceiling speakers Wall Speakers home theater rooms monitor speaker loud speakers from all sizes 4 6 8 12 inch
- PLUG AND PLAY EASY INSTALL.The Pyle speaker distribution hub Is passively powered by your stereo - only need to plug in the wires.Its a good idea to add labels on the buttons for the different speakers so you don't have to remember each zone is
- WORRY-FREE SHOPPING: With the Pyle multi speaker switch we are confident of the quality of our product, therefore, we offer a 30 day money back guarantee no questions asked
User questions & answers
| Question: | I want to use this on two sets of speakers, one set for front height & second set for side surrounds and switch between the two. Is it possible |
| Answer: | I have speakers throughout my house. The Pyle Six-zone box allows me to have music in most every room. Hook each speaker you have to the Pyle and hook the Pyle to your receiver, speaker A or B. I have mine on B. Connect your receiver audio to your TV audio. There is a separate button on the Pyle that you should always keep positioned to on (button in). That is the easiest I can make it for you. This box works perfect for me and has never shut off. Good luck to you. |
| Question: | Does this switch allow me to control sets of speakers independently |
| Answer: | I am running an older Technics amp 2x100 6 pairs of speakers at times so I would say yes. Just remember you are putting this amp to a lot of work if you're running 6 pairs of speakers so watch the temps on the amp. |
| Question: | One person indicated what they believed the protection button was. Does anybody know? Pyle technical support apparently doesn't exist |
| Answer: | Maybe. The more speakers that you connect the lower their effective impedance as seen by the amplifier. And the lower the effective impedance the higher the current that the amplifier must generate in order to drive the speakers to a specific listening level without distortion.Most speakers, particularly the less costly ones, have a nominal 8 ohm impedance. So if you are driving one set of such speakers the amplifier will be seeing an 8 ohm load. But if your amplifier is driving 2 sets of such speakers the amplifier will be seeing 1/(1/8 + 1/8) = a 4 ohm load; if your amplifier is driving 3 sets of such speakers the amplifier will be seeing a 1/(1/8 + 1/8 + 1/8) = 2.7 ohm load, etc. With 6 speakers your amplifier will be seeing a 1.3 ohm load. And this would be a nominal and typically maximum load; in practice the load fluctuates depending on frequency and is effectively lower for short periods of time.Some amplifiers are designed to drive such low loads but many are not. If you try to do that with such a low current amplifier for a long period of time you will burn up the amplifier. That is why speaker selectors like this one have a protection button which basically adds a resistance in series with the speakers in order to increase the impedance seen by the amplifier. This will reduce the overall efficiency and you will notice that you have to increase the volume to get the same amount of sound as with the protection button off.So, if your amplifier has a sufficient current capability to drive those 6 speakers to your desired listening levels, great. If it doesn't, and if the listening level is too low for your tastes with the protection button on, you will need to either settle for lower volume or get a more powerful amplifier. |
| Question: | How do I hook this up to my 5.1 receiver |
| Answer: | The sound is great there is no distortion. |
Product features
Premium New and Improved 4 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box
This speaker selector box allows you to play audio to up to eight different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.
SPW8 Whole House Audio 8-Zone Speaker Distribution Panel Single Audio Input 300W Per Channel - OSD Audio
Product description
The SPW-8 is a stereo (two channel), one input, eight output, broad frequency response, volume control distribution hub. It provides a simple solution in complex speaker installations providing an easy way to connect from two to eight volume controls and pairs of stereo speakers to a single stereo receiver/amplifier. All outputs are labeled easing both connection and troubleshooting of a system
Specifications
- Power handling: 150 watts RMS per channel (suitable for use with 300 watt per channel rated receivers/amplifiers)
- Frequency Response: 20 Hz - 22kHz (+0dB, -0dB)
- Wire size acceptance: 2 or 4 conductor, stranded, 16 AWG to 14 AWG
- Dimensions: L 3.40 in. x W 1.70 in. x H 7.00 in
- Maximum Number of Volume Control/Speaker
- Connections: 8 pairs
- Must be used with impedance matching volume controls
- MAXIMUM NUMBER OF SPEAKERS - We recommend using no more then 8 pairs of speakers for this unit
- 150W POWER HANDLING - 150 Watts RMS, Will work with Amplifier Rated up to 300 Watts
- SPEAKER WIRE ACCEPTANCE - 2 or 4 Conductor, Stranded, 16 AWG to 14 AWG
- EASY INSTALLATION - With removable input and output connectors, set up will take minutes. Once you have the speaker wires connected, they will not come out with our screw-down design
- COMPACT DESIGN - Simple compact design measuring at 3.4" X 1.7" X 7"
User questions & answers
| Question: | This unit does not have impedance matching transformers. correct |
| Answer: | About 9 inches deep |
| Question: | Can i use this to combine zones for a 2003 nuvo distribution amplifier (nv-e6m? the nuvo only has 12 zones and i have more than that in the home |
| Answer: | It's a pair |
| Question: | Can I connect use inwall volume switch with this |
| Answer: | You can't do it by just plugging them to the Audio. These speakers require a power amp of sorts and the Audio out of a TV just provides signal to and Amplifier. You could by acquiring an Amplifier/ plugging the TV into the Amplifier, then running the Speaker output to these speakers. |
| Question: | Can I connect this to the small Pyle inwall amplifier systems to power additional speakers |
| Answer: | matches semi-gloss white ceiling paint |
Premium New and Improved 8 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box for Multi Channel High Powered Stereo Amplifier A/B/C/D Switches | 6 Pairs Of speakers - Pyle (PSS8)
Pyle
Product description
PyleHome Model : PSS8
8-Ch. Stereo Speaker Selector
8 Channel High Power Stereo Speaker Selector
This speaker selector box allows you to play audio to up to eight different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.
- THE NUMBER 1 SELLER 6 ZONE SPEAKER SELECTOR:The New and Improved Multi Zone Speaker Selector Can Play 8 Sets of Speaker at the Same Time or What Ever Speaker You Want to Control or a Pair of Speaker from High Powered Amplifiers.
- CONTROL YOUR POWERED 6 CHANNEL AMPLIFIER:You Can Control Any Amplifier from Pyle Crown Denon Sony Panasonic Yamaha and Many More.also Control 4 10 4 6 8 Inch Speaker Box.
- PLAY ANY COMBINATION SETS OF SPEAKERS AT ONCE.:The Pyle Speaker Switch Box Is Great Help For Controlling Ceiling Speakers Wall Speakers Home Theater Rooms Monitor Speaker Loud Speakers From All Sizes 4 6 8 12 Inch
- PLUG AND PLAY EASY INSTALL.The Pyle Speaker Distribution Hub Is Passively Powered By Your Stereo - Only Need To Plug In The Wires.Its A Good Idea To Add Labels On The Buttons For The Different Speakers So You Don't Have To Remember Each Zone Is
- WORRY-FREE SHOPPING: With the Pyle multi speaker switch we are confident of the quality of our product, therefore, we offer a 30 day money back guarantee no questions asked
- Up To 8 Separate Speakers Pair To Your Stereo System
- Accepts Speaker Wires Up To 14-Gauge
User questions & answers
| Question: | Does this unit have impedance matching transformer feature |
| Answer: | Hi, yes the unit has an impedance matching transformer feature. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PSS8 for more details. Thank you. |
| Question: | I currently have.l a system set up with 16 gauge speaker wires. What would happen if I used the existing speaker wires in this device |
| Answer: | I think you will be fine, depending on how long your wire runs are. |
| Question: | Can you use it the opposite way....multiple recievers to one set of speakers |
| Answer: | No the only way you could do that is to biamp the reciever you could get a reciever with zone 2 or zone 3 and have different sound in different aera |
| Question: | How can it be both new and improved |
| Answer: | Increase connectivity range |
Product features
Premium New and Improved 8 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box
This speaker selector box allows you to play audio to up to eight different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.
THE NUMBER 1 SELLER 6 ZONE SPEAKER SELECTOR
The New and Improved Multi Zone Speaker Selector Can Play 8 Sets of Speaker at the Same Time or What Ever Speaker You Want to Control or a Pair of Speaker from High Powered Amplifiers.
PLAY ANY COMBINATION SETS OF SPEAKERS AT ONCE
The Pyle Speaker Switch Box Is Great Help For Controlling Ceiling Speakers Wall Speakers Home Theater Rooms Monitor Speaker Loud Speakers From All Sizes 4 6 8 12 Inch.
PLUG AND PLAY EASY INSTALL
The Pyle Speaker Distribution Hub Is Passively Powered By Your Stereo - Only Need To Plug In The Wires.Its A Good Idea To Add Labels On The Buttons For The Different Speakers So You Don't Have To Remember Each Zone Is.
Latest Reviews
View all
Soap Savers
- Updated: 11.07.2023
- Read reviews
Toddler Sun Hat
- Updated: 30.04.2023
- Read reviews
Powered Subwoofers
- Updated: 05.04.2023
- Read reviews
Airbrush Paints
- Updated: 27.04.2023
- Read reviews
Book Beads Teen Fictions
- Updated: 23.06.2023
- Read reviews