Product description

PyleHome Model : PSS8

8-Ch. Stereo Speaker Selector

8 Channel High Power Stereo Speaker Selector

Up To 8 Separate Speakers Pair To Your Stereo System.

Accepts Speaker Wires Up To 14-Gauge.

Handles 100 Watts Per Channel With Speaker Systems That Have A Minimum Impedance Of 8 Ohms.

Protection Circuitry Keeps It Running Smoothly

Frequency Response: 20Hz-20KHz

Dimensions 12.8'' X 2.04'' X 6.12''

This speaker selector box allows you to play audio to up to eight different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.

• THE NUMBER 1 SELLER 6 ZONE SPEAKER SELECTOR:The New and Improved Multi Zone Speaker Selector Can Play 8 Sets of Speaker at the Same Time or What Ever Speaker You Want to Control or a Pair of Speaker from High Powered Amplifiers.
• CONTROL YOUR POWERED 6 CHANNEL AMPLIFIER:You Can Control Any Amplifier from Pyle Crown Denon Sony Panasonic Yamaha and Many More.also Control 4 10 4 6 8 Inch Speaker Box.
• PLAY ANY COMBINATION SETS OF SPEAKERS AT ONCE.:The Pyle Speaker Switch Box Is Great Help For Controlling Ceiling Speakers Wall Speakers Home Theater Rooms Monitor Speaker Loud Speakers From All Sizes 4 6 8 12 Inch
• PLUG AND PLAY EASY INSTALL.The Pyle Speaker Distribution Hub Is Passively Powered By Your Stereo - Only Need To Plug In The Wires.Its A Good Idea To Add Labels On The Buttons For The Different Speakers So You Don't Have To Remember Each Zone Is
• WORRY-FREE SHOPPING: With the Pyle multi speaker switch we are confident of the quality of our product, therefore, we offer a 30 day money back guarantee no questions asked
• Up To 8 Separate Speakers Pair To Your Stereo System
• Accepts Speaker Wires Up To 14-Gauge

User questions & answers

Question:	Does this unit have impedance matching transformer feature
Answer:	Hi, yes the unit has an impedance matching transformer feature. You may check other details of the unit by visiting our website pyleaudio.com. Type the model number on the search box PSS8 for more details. Thank you.
Question:	I currently have.l a system set up with 16 gauge speaker wires. What would happen if I used the existing speaker wires in this device
Answer:	I think you will be fine, depending on how long your wire runs are.
Question:	Can you use it the opposite way....multiple recievers to one set of speakers
Answer:	No the only way you could do that is to biamp the reciever you could get a reciever with zone 2 or zone 3 and have different sound in different aera
Question:	How can it be both new and improved
Answer:	Increase connectivity range

Product features

Premium New and Improved 8 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box

This speaker selector box allows you to play audio to up to eight different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.

THE NUMBER 1 SELLER 6 ZONE SPEAKER SELECTOR

The New and Improved Multi Zone Speaker Selector Can Play 8 Sets of Speaker at the Same Time or What Ever Speaker You Want to Control or a Pair of Speaker from High Powered Amplifiers.

PLAY ANY COMBINATION SETS OF SPEAKERS AT ONCE

The Pyle Speaker Switch Box Is Great Help For Controlling Ceiling Speakers Wall Speakers Home Theater Rooms Monitor Speaker Loud Speakers From All Sizes 4 6 8 12 Inch.

PLUG AND PLAY EASY INSTALL

The Pyle Speaker Distribution Hub Is Passively Powered By Your Stereo - Only Need To Plug In The Wires.Its A Good Idea To Add Labels On The Buttons For The Different Speakers So You Don't Have To Remember Each Zone Is.

• ZONE CONTROL: This high power speaker selector is an effective way to distribute music to eight listening zones and includes individual on/off selectors for each zone and is constructed of 14-gauge steel.
• DESIGN: The ISS8 is a single source speaker distribution system with individual on/off selectors for each listening zone which distribute one stereo speaker-level signal from your amplifier across 8 zones.
• CONNECT: The phoenix connectors on the ISS8 are easily removable to avoid frustration when connecting multiple speakers. With screw-down terminals, the speaker wire cable will never come loose.
• IMPEDANCE PROTECTION: Impedance-matching frequency protection circuitry allows one amplifier to safely power multiple pairs of speakers without your amp or receiver overheating or damaging to the equipment.
• EASY INSTALLATION: The low profile ISS8 is constructed of heavy-duty steel and allows easy access to the protection switch. The black brushed aluminum design easily fits into a cabinet or anywhere in the home.

User questions & answers

Question:	My Yamaha Receiver (750) has A and B speaker outputs. Would I connect the ISS4 inputs to the B outputs and then run 4 separate speaker pairs from the B side of the receiver leaving the A side for the main listening room speakers
Answer:	It really depends on the type of speaker configuration you have in your main zone. If you have a 5.1 environment in your main zone the best option is to connect the iss4's inputs to the zone 2 terminal on the back of your 750. This will allow you to listen to different sources in each zone at the same time. For instance you could watch a DVD in your main zone and in zone 2 you could be listening to an iPod or the fm tuner. Hope this answers your question, if you choose this option then remember you can only listen to analog sources in a zone 2 setup.
Question:	I can see how to select zones, how do you select the source? I have a phono amp and home theater amp I need to switch between, one set of speakers
Answer:	There is an round A/B button next to each rectangular zone button. Undepressed your are selecting source A. Press the button in and you are now selecting source B.
Question:	Can I run the 6 pairs of speakers at the same time? If this can be done, the volume drops
Answer:	Of course the volume drops. You will have 6 parallel circuits, each getting 1/6 the current. Basic rules of electricity.
Question:	I've bought this and I have connected it to 4 zones of in-wall speakers but the volume is extremely low! Do I need a receiver before the input
Answer:	What are you powering the speakers with?? In an ideal setup this device would be connected after the stereo amplifier or a/v receiver. It's is recommended to have an power source of at least 50W per channel supplying power to this volume selector. If you have impedance matching volume controls make sure the protection circuit button is in the off position(pushed out). If you have no volume controls push the circuit protection button in so that it equalizes the impedance.

Product features

Dual Source

The dual source allows you to have 2 different music sources connected, with some units offering the ability to select source per zone.

Volume Control

Using the same technology as our in-wall volume controls, most units offer volume control per zone.

Impedance Protection

Impedance protection allows a single amplifier to safely power several pairs of speakers without going below the amp’s impedance rating.

Easy to Install

Removable input/output phoenix connectors accept up to 14g wire and provide hassle-free hook-up.

OSD Audio 8-Zone Single Source Speaker Selector

The ISS8 high power speaker selector is an easy and effective way to distribute music to up to eight listening zones (eight pairs of speakers) and play any pair, a combination of pairs, or all pairs simultaneously. East to connect with a low-profile design that easily fits into a cabinet or equipment rack.

Product description

Pyle Model : PSLSW4

4-Ch. Speaker Selector System

Multi-Zone Speaker Selector, 4-Channel Audio Speaker Receiver System

Features:

Convenient Audio Control for Up to 4 Pairs of Speakers

Home Theater Stereo Amplifier System Support

Independent Audio Source Channel Volume Controls

Input/Output: Screw Type Connector Terminals

Compact Desktop / Tabletop Receiver Design

Front Panel Button Control Center

Master Power Switch

Built-in Electronic Overload Protection Circuitry

Technical Specs:

Power Handling: 100 Watt MAX Per Audio/Speaker Channel

Speaker Selector Type: 4-Channel

Speaker Cable Wire Support: Up to 14-Gauge (14 AWG)

Minimum Impedance: <8 Ohm

Frequency Response: 20Hz-20kHz

Dimensions (L x W x D): 16.9'' x 6.3’’ x 3.0'' -inches

• 100 WATT MAX: The Pyle Multi-Zone A B Speaker Selector Switch is perfect for your home theater sound system w/ 100W max power per channel. For use w/ 8ohm impedance speakers. Has a compact slim tabletop design that complements any home theater setup
• CONTROL 4 SPEAKERS: The new indoor multichannel speaker switcher controls up to 4 speaker pairs connected to a stereo amplifier at the same time or in combination. Input/output via screw type connector terminals which accept up to 14AWG speaker wire
• INDEPENDENT AUDIO CONTROL: Features independent audio source channel volume controls. The push button design lets you activate each pair individually to customize the listening experience in your home and independently control the volume to each pair
• EASY SETUP: Simply connect the left and right outputs from your amp/receiver and/or another source to the left and right A/B inputs on the mini 4-channel multizone controller, connect up to 4 pairs/8 speakers and enjoy high quality audio performance
• OVERLOAD PROTECTION: Equipped w/ front panel control switches consisting of rotary knobs for volume control and a master speaker switch. Offering high-quality audio, it also provides overload safety protection circuitry and long-term reliability

User questions & answers

Question:	Will fit on slider rack shelf with 16 inches wide and 15 inches deep? thank you
Answer:	Good question. There are two things you should know before you pull the trigger on this. Banana plugs don’t insert far enough to stay put, and since I have this box hooked up to amplified speakers I kept getting a buzz. I bought special banana plug pig tails which I ended up removing because of said problem. What did work very well for me was to remove the banana plugs and strip and solder the speaker wires then tighten the threaded part against the inserted wire in the hole on the shaft, a very tight connection and that worked great. The other issue is you can’t turn off one the speakers which was reported in one of the comments. It is annoying but for my application one set of speakers is downstairs with their own volume control so, I just adjust the volume on them when in use. Hope this helps.
Question:	I don't understand the description. what does the a /b button at each speaker volume control mean? doesn't the speaker pairs selected play together
Answer:	Hi, I have one of these (returning the 1st one due to poor speaker terminal , I find that it will accept a 4mm and thicker Banana Plug. Amazon's model was poor fit, but MediaBridge's plug in more securely. I have not fully connected my XtremePro yet, but I hope this helps.
Question:	Can the speaker connectors take banana plugs as opposed to threading the wires
Answer:	I may not be understanding your question correctly, but with this item I am using the volume control on my amp for the front speakers and the volume on this device to control the volume on the rear speakers. So yes, I can set one set of speakers at a different volume that the other. Again, if I am understanding your question correctly.
Question:	So I can hook up 4 sets of speakers on my new Pyle unit all on one receiver without worry of damage? Looked like chart had impedence fall off to
Answer:	Yes as far as I can tell. Aka-when I only have on speaker on and flip the switch to turn another group on, the volume drops. It’s not necessarily half the volume though.

Product features

4-Ch. Speaker Selector System

This speaker selector box allows you to play audio to up to four different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch and an independent volume control. You can also hook up another amplifier. Protection circuitry keeps it running smoothly.

CONTROL 4 SPEAKERS

The new indoor multichannel speaker switcher controls up to 4 speaker pairs connected to a stereo amplifier at the same time or in combination. Input/output via screw type connector terminals which accept up to 14AWG speaker wire

INDEPENDENT AUDIO CONTROL

Features independent audio source channel volume controls. The push button design lets you activate each pair individually to customize the listening experience in your home and independently control the volume to each pair. Distribute your music to every room in your home with this 4 Channel Speaker Selector from Pyle.

EASY SETUP

Simply connect the left and right outputs from your amp/receiver and/or another source to the left and right A/B inputs on the mini 4-channel multizone controller, connect up to 4 pairs/8 speakers and enjoy high quality audio performance

Protection

Equipped w/ front panel control switches consisting of rotary knobs for volume control and a master speaker switch. Offering high-quality audio, it also provides overload safety protection circuitry and long-term reliability.

Watt

The Pyle Multi-Zone A B Speaker Selector Switch is perfect for your home theater sound system w/ 100W max power per channel. For use w/ 8ohm impedance speakers. Has a compact slim tabletop design that complements any home theater setup

Dimensions

The Pyle Multi-Zone A B Speaker Selector Switch has a (L x W x D): 16.9'' x 6.3’’ x 3.0'' dimensions.

Product description

Pyle Model : PSLSW6

6-Ch. Speaker Selector System

Multi-Zone Speaker Selector, 6-Channel Audio Speaker Receiver System

Features:

Convenient Audio Control for Up to 6 Pairs of Speakers

Home Theater Stereo Amplifier System Support

Independent Audio Source Channel Volume Controls

Input/Output: Screw Type Connector Terminals

Compact Desktop / Tabletop Receiver Design

Front Panel Button Control Center

Master Power Switch

Built-in Electronic Overload Protection Circuitry

Technical Specs:

Power Handling: 100 Watt MAX Per Audio/Speaker Channel

Speaker Selector Type: 4-Channel

Speaker Cable Wire Support: Up to 14-Gauge (14 AWG)

Minimum Impedance: <8 Ohm

Frequency Response: 20Hz-20kHz

Dimensions (L x W x D): 16.9'' x 6.3’’ x 3.0'' -inches

• 100 WATT MAX: The Pyle Multi-Zone A B Speaker Selector Switch is perfect for your home theater sound system w/ 100W max power per channel. For use w/ 8ohm impedance speakers. Has a compact slim tabletop design that complements any home theater setup.
• CONTROL 6 SPEAKERS: The new indoor multichannel speaker switcher controls up to 6 speaker pairs connected to a stereo at the same time or in combination. Input/output via screw type connector terminals which accept up to 14AWG speaker wire.
• INDEPENDENT AUDIO CONTROL: Features independent audio source channel volume controls. The push button design lets you activate each pair individually to customize the listening experience in your home and independently control the volume to each pair.
• EASY SETUP: Simply connect the left and right outputs from your amp/receiver and/or another source to the left and right A/B inputs on the mini 6-channel multizone controller, connect up to 6 pairs/12 speakers and enjoy high quality audio performance.
• OVERLOAD PROTECTION: Equipped w/ front panel control switches consisting of rotary knobs for volume control and a master speaker switch. Offering high-quality audio, it also provides overload safety protection circuitry and long-term reliability.

User questions & answers

Question:	I want to use this on two sets of speakers, one set for front height & second set for side surrounds and switch between the two. Is it possible
Answer:	While you can connect up to four pairs of speakers, this device will not work as a surround sound device like having front, rear, center channels like a Dolby or DTS system. This only splits a stereo signal to multiple pairs of the same exact stereo signal.Hopefully this helps.
Question:	Does this switch allow me to control sets of speakers independently
Answer:	You can control up to 4 sets of speakers independently or play all at the same time! I have switch A for patio speakers, switch B for inside house, sometimes I play A or B or A+B
Question:	One person indicated what they believed the protection button was. Does anybody know? Pyle technical support apparently doesn't exist
Answer:	In modern amplifiers the protection button is actually used to simulate a safe ohm load to the amplifier, not mask the lack of a load. When you connect multiple speakers of certain ohm ratings in series or parallel, it alters the ohm load presented to the amplifier. The switch allows you to attach multiple speaker sets while presenting and "buffering" a consistent/safe ohm load instead of the actual load. 2 x 8 ohm speakers in parallel on the same channel would show up as 4 ohm (divide ohm rating of speaker by number of speakers), which could cause your amplifier to fail (it needs to work harder) if not designed to drive speakers with that ohm rating. If you are using more than 2 pair of 8 ohm speakers simultaneously you would turn on the protection mode to present an ohm load of ~4 ohm instead. Most protection solutions present a 4.5 ohm load in this scenario. Understand that ohm loads are AC and thus are constantly fluctuating during playback. Speaker ohm levels typically will "change" @ different volume levels etc. Low impedance allows for a more efficient electric signal. Typically speakers are rated 4, 6 or 8 ohms. Lower end receivers can sometime have issues driving low impedance 4 or 2 ohm speakers.
Question:	How do I hook this up to my 5.1 receiver
Answer:	Hello Dan,This device is for other areas of a home where you have additional speakers and is not made to be used with the surround sound system. It can be used with "Stereo Receivers" or with 7.1 A/V Receivers where your only using the 5.1 portion of the receiver. What that means is if you have a surround sound system in your home, then all the speaker outputs of the receiver are dedicated to the surround sound and at that point there are no more speaker terminal outputs to be used.However, if your receiver is a 7.1 A/V receiver and your only using it as a 5.1 Surrond Sound System, then you will have 2 additional speaker outputs that aren't being used.At that point you can attach those terminals (via 2 speaker wires a left & a right) to the Pyle 4 Channel Speaker Selector. Now connect the other rooms to the outputs on the Pyle Speaker Selector. ***Make sure you have the correct speakers paired to each individual room when you connect these wires. You can easily determine this by taking a battery from your remote control and placing the ends of the speaker wires to the battery. Positive end of the wire + to the positive end of the battery and the negative end off the same wire to the negative end of the battery, You can hold the negative wire tight to the battery with your thumb while you release and then retouch and release and retouch the positive end a few times. you should hear a popping sound coming out of the speaker. This will let you know which wire goes to which speaker in which room or area. I usually use a "Sharpie" Marker and label the wire "Living Rm" or "Dining Rm" or what ever the room is that the wire goes to. *****Now, and this is most important or you will "FRY" your Pyle unit, make sure the negative wire that is connected to the Pyle output is the same negetive wire that is connected to the speaker terminal in the room where that wire goes and the positive does the same. IF YOU CROSS THE WIRES AND PUT THE NEGATIVE WIRE IN THE POSITIVE TERMINAL, YOU MOST LIKELY WILL GET BAD RECEPTION TO THAT SPEAKER OR FRY (DAMAGE) THE PYLE UNIT AND MAYBE EVEN YOUR RECEIVER. ALSO, MAKE SURE NO BRAIDS OFF OF THE SPEAKER WIRES TOUCH THE CHASSIS OF THE RECEIVER OR EACH OTHER. THIS WILL SHORT THE UNIT.Finally, you may have to go into the setting of your A/V Receiver and select the "Speaker Settings" and scroll to where the "Surround Back" or "Zone 2" Speaker set up is and select "NO". This will deactivate the use of those speakers to be used in the room where the Surround Sound is and will allow them to be used for "Stereo Music" to other rooms.In about 90-100% of all A/V Recievers have to use "Analog" or "RCA Cables" from the device you want to hear the music or sound from in the rooms that the Pyle is hooked up to. FM Tuner (or radio stations), Pandora and Internet Radio Stations are already incorporated in the receiver and will play with no problem.Now just select "Zone 2" on the Receiver and press the "Input" selection you want to hear in those other rooms. Raise the Zone 2 Volume Level for those rooms and you should hear music or audio. Please note that some receivers have a time period of 5-6 seconds for you to do these steps, so when making your audio selection and volume level, know where your audio selection button is that you want before performing these steps or your Receiver timer will time out and you will have to permorm them again. It can be frustrating at first for a novice. It was for me. Sometimes still is. LOLA couple of things to know. I would only use this device if I had "Individual Volume Controllers" in each of the rooms or areas where I want Music or Sound. If you don't, then the "volume level" will be the same in all those areas. Volume Controls allow you to do what they say, they can "Control" the volumes level. If the Music or Sound is too High in one room, it might be too Low in an other room. Volume Controls correct that.If you don't have individual Volume Controls in the rooms where your speakers are, then you want to purchase the Pyle Home PSPVC4 4-Channel High Power Stereo Speaker Selector with volume Control. http://www.amazon.com/Pyle-PSPVC4-4-Channel-Speaker-Selector/dp/B0013CH7UK/ref=sr_1_1?ie=UTF8&qid=1376744129&sr=8-1&keywords=Pyle+Speaker+Selector+with+Volume+Controls If you have any issues getting the sound to pass through Zone 2 of your Receiver, contact the units manufacturer and ask for tech support.I hope this helps.Ken Nichols, PresidentSIGHTS & SOUNDS OF SOUTH FLORIDA, INC.3801 Environ Blvd.Fort Lauderdale, FL 33319305-788-1895

Product features

Premium New and Improved 4 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box

This speaker selector box allows you to play audio to up to eight different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.

Product description

Switch selector volume control switch box hub distribution box for multi channel high powered amplifier control 6 pairs of speakers

• Up to 6 Separate Speaker Pairs to your Stereo System
• Accepts Speaker Wires Up to 14- Gauge
• Handles 100Watts Per Channel with Speaker Systems that have a Minimum Impedance of 8 Ohms
• Up to 6 Separate Speaker Pairs to your Stereo System - Support Two Stereo Amplifiers
• Accepts Speaker Wires Up to 14- Gauge - Frequency Response: 20Hz-20KHz
• Handles 100Watts Per Channel with Speaker Systems that have a Minimum Impedance of 8 Ohms - Dimensions: 16.92- Inches(W) x 3.03- Inches(H) x 6.29- Inches(D)
• Protection Circuitry Keeps it Running Smoothly
• Individual Speaker Volume Control

User questions & answers

Question:	can this replace my Pyle Pro PT
Answer:	No, not the devices have the same functions!
Question:	Ok, I bought the PT510 amplifier, and the PSPVC6 speaker selector, but not sure how to connect them together. Can anyone help
Answer:	Ok I'm going to try and keep it simple. Normally, once the amp is connected the 'sound' travels out of the red/white or left/right speaker connectors that are attached then to the speaker system. In your case, think of the speaker box as a 'conjunction' (like the words 'and/ but' in a sentence)..so just connect the 'speaker out' on your amp to the 'speaker in' on the speaker selector box...then connect the speaker box to the 6 speakers...be ready with a small flat head screw driver to open each the speaker connection ports...it's a bit more tedious but assures a professional non clip in/out connection...good luck...and make sure every thing is off to avoid 'blowing out' of the speakers and/or unit.
Question:	Does this have impedance protection - control against low ohms driving multiple speakers
Answer:	http://manuals.pyleusa.com/PDF/PSPVC4-6.pdf The last few pages of manual shows impedance of turning on combinations of speakers It is the amp that needs to be 4 ohm stable, I have a Denon AVR 3300 and AVR 2500. The more speakers active, the lower the impedance, (ohms Law) and the more power needed from the amp According to Crutchfield, we need a 4 ohm stable amp, and the Denon family provides overload protection, and the Denon amps have a 8 ohm (default) and a4 ohm setting I already fried an Onkyo amp, running all the speakers at once, for an extended period.
Question:	Is the Pyle PT510 240 Watt Amplifier a good receiver to use with this. I want to put sound in many rooms in my office
Answer:	I am by no means an AV expert. This amplifier was recommended to me by our AV guy in order to amplify the sound for distribution into several rooms in which we have speakers. We primarily use this amp in connection with an Apple TV device to play music from our iPhone or iPad in our kitchen, den, family room and outside speakers. Hope this response is helpful for you. Kind Regards, Robert

Product features

Premium New and Improved 6 Zone Channel Speaker Switch

Features:

• Multi-Channel High Powered Amplifier
• Up to 6 Separate Speaker Pairs to your Stereo System
• Accepts Speaker Wires Up to 14- Gauge
• Protection Circuitry Keeps it Running Smoothly
• Individual Speaker Volume Control
• Support Two Stereo Amplifiers
• Rugged & Durable Housing Construction, Cabinet Heatsink
• Control Powered 6 Channel Amplifier
• Plug and Play Easy Install

Technical Specs:

• Power Output: 6 x 100 Watts, Power Supply: 120/240V Voltage Selector
• Amplifier Design: 6-Channel, Minimum Impedance: 8 Ohms
• Frequency Response: 20Hz - 20KHz, Signal to Noise Ratio: >81dB
• Channel Separation: 80 dB, Crosstalk between Channels: 50 dB
• Speaker Terminal Wire Size: 14-22 gauge
• Max. Amplifier Input: 100W RMS, 150W AVG
• Max. Output per Speaker: 18W RMS, 50W AVG
• Product Dimension (L x W x H): 6.29'' x 16.92'' x 3.03'' -inches

Product description

Spread your music everywhere. One of the most popular trends in home audio is whole house audio distribution. Unfortunately True multi-zone distribution systems are normally built into only the higher end receivers or require an expensive audio distribution network. Monoprice brings everything within reach of the average homeowner by offering a wide selection of home audio distribution accessories. A key element of any home audio distribution system is a speaker selector. The speaker selector allows you-inch distribute your source signals-inch several sets of speakers distributed throughout your home. Additionally a good speaker selector like our 4-Channel A/B Selector listed here will allow you-inch have different source audio sent-inch different rooms so that someone in one room can be listening-inch something different in another room. Most importantly a speaker selector provides impedance matching which ensures that the additional speakers do not overload or damage your Amps. The Monoprice msv-4 is a dual source 4 zone speaker selector with built in independent volume controls for each source. This device can handle up-inch 100 watts per channel. It supports a frequency range of 20hz-inch 20Khz. Accepts wire gauges up-inch 14AWG and maintains load at 8 ohms. Installation is straight forward and simple. This is part of making your dream sound system into a reality.

• Will allow you-Inch have different source audio sent-Inch different rooms so that someone in one room can be listening
• It supports a frequency range of 20Hz-Inch 20kHz.
• Accepts wire gauges up-Inch 14AWG and maintains load at 8 Ohms
• Refer user manual below.

User questions & answers

Question:	Also anyone experience problems with it maintaining an 8 ohm load with the volume knobs set to different levels? I've heard thats a common problem
Answer:	Absolutely Laurie, that is one of the things I liked about this speaker it is very universal on speaker mounting and sound positioning angles as I wanted to be able to point them downward from the higher locations. I definitely recommend these as an (addition) to an existing surround system.
Question:	Can I use this to power a sub woofer through one of the channels
Answer:	This is a single speaker. (I bought 1 and learned that so I bought another)It is worth the price for a pair. They are pretty good above 75-80hz and handle mids and highs well. They take a 30-40w amp. I like them for the money.
Question:	Is this speaker selector Autofromer based or Resistor based
Answer:	They lock perfectly. Not very strong sound, but for some music they do the job well
Question:	I don't see a power cable? Does it not require any
Answer:	Speaker wire is NOT included. You will need your own wire to connect to an amp / receiver.

Product features

Monoprice 4-Channel A/B Speaker Selector

Product Description

One of the most popular trends in Home Audio is whole house audio distribution. Unfortunately, true multi-zone distribution systems are normally built into only the higher end receivers or require an expensive audio distribution network. Monoprice brings everything within reach of the average homeowner by offering a wide selection of Home Audio Distribution accessories.

A Key element of any home audio distribution system is a speaker selector. The speaker selector allows you to distribute your source signals to several sets of speakers distributed throughout your home.

Additionally, a good speaker selector like our 4-channel A/B selector listed here, will allow you to have different source audio sent to different rooms so that someone in one room can be listening to something different in another room.

Product description

Theater Solutions by Goldwood TS8 Eight Zone Passive Speaker Selector Box

Traditional Passive Design splits the incoming signal and power to engaged zones

One to all zones can be engaged ON/OFF at the same time

Single Pair Direct button bypasses the internal impedance protection for 1 zone high volume

Connect 8 pair or 16 speakers at 8ohm speakers and handles 300 watts RMS per channel

Spring loaded raw wire connectors fit 14 to 22 gauge speaker wire

Steel housing has rubber feet and a compact size of (H x W x D) 2.1875" x 17" x 4.875"

Included pre-printed zone labels for clear and easy connection and identification



Theater Solutions C500-16-2 CL3 Rated 2 conductor 16 gauge 500 foot speaker wire

65 Strand count with 2 SRPVC insulated wires for use with Class 2 and 3 Circuits

UL Listed, ROHS Compliant, ETL Certified and Oxygen Free Copper (OFC)



System Requirements

Any home audio receiver or amplifier with raw speaker wire outputs



Applications

Whole House Audio Systems

Business or Retail Installations



What's in the boxes

1 Passive Speaker Selector Box

Instruction Manual

1 Case of 500 Foot 16 Gauge 2 Conductor Speaker Wire

• 8 ZONE SPEAKER SELECTOR BOX AND CL3 WIRE SET - Traditional passive design splits the incoming signal and power to engaged zones, one to all zones can be engaged ON/OFF at the same time
• ZONE FLEXIBILITY - Connect 8 pair or 16 speakers at 8ohm speakers and handles 300 watts RMS per channel, spring loaded raw wire connectors fit 14 to 22 gauge speaker wire
• IMPEDANCE PROTECTION - Single pair direct button bypasses the internal impedance protection for 1 zone high volume, included pre-printed zone labels for clear and easy connection and identification, steel housing has rubber feet and a compact size of (H x W x D) 2.1875" x 17" x 4.875"
• SYSTEM REQUIREMENTS - Any home audio receiver or amplifier with raw speaker wire outputs. Includes one case of C500-16-2 CL3 Rated 2 conductor 16 gauge 500 foot speaker wire
• WHAT'S IN THE BOXES - 1 Theater Solutions by Goldwood TS8 passive speaker selector box with instruction manual and 1 case of C500-16-2 CL3 speaker wire. Use for whole house audio systems, outdoor business or retail installations

Product description

Specifications



Theater Solutions TS8 Eight Zone Passive Speaker Selector Box

Connects up to 8 pairs of speakers at 4 to 16Ohm

One to all zones can be engaged at the same time

Handles up to 300 watts RMS per channel

Amplifier/Receiver Impedance Protection

Accommodates 14 to 22 gauge speaker wire

Spring Loaded Wire Connectors

Dimensions (H x W x D): 2.1875" x 17" x 4.875"

Steel housing and rubber feet

Passive Design, No Power Required

Pre-printed zone labels for easy speaker connection and identification

Designed and Engineered in the USA

Full Instructions Included



Theater Solutions Roll of C100-14-4 Wire

100 Feet of CL3 Rated Four Conductor Speaker Wire

14 Gauge, 105 Strand and SRPVC Ultra Flexible Insulation

UL Listed, Sunlight Resistant and Burial Grade for All Outdoor Speakers

Use for All Class 2 and 3 Circuits

ROHS Compliant, ETL Certified and Oxygen Free Copper (OFC)



Applications:

Home Audio Systems

Whole House Audio Systems

Business / Office Audio Systems



This Listing and Price is for 1 Speaker Selector Box and 1 Roll of Wire

• Theater Solutions TS8 passive 8 zone speaker selector box, connects up to 8 pairs of speakers at 4 to 16ohm, one to all zones can be engaged at the same time
• Handles up to 300W RMS per channel, amplifier or receiver impedance protection, accommodates 14 to 22 gauge speaker wire, spring loaded wire connectors
• Dimensions are (H x W x D) 2.1875" x 17" x 4.875", steel housing and rubber feet, passive design, no power required, pre-printed zone labels for easy speaker connection and identification
• Theater Solutions 100 foot roll of C100-14-4 CL3 rated 4 conductor speaker wire, 14 gauge, 105 strand, SRPVC ultra flexible insulation, sunlight resistant, burial grade for indoor or outdoor speakers
• Use for home audio systems, whole house audio, business or office audio, this listing and price is for 1 speaker selector box and 1 roll of wire

Product description

Specifications



Theater Solutions TS8 Eight Zone Passive Speaker Selector Box

Connects up to 8 pairs of speakers at 4 to 16Ohm

One to all zones can be engaged at the same time

Handles up to 300 watts RMS per channel

Amplifier/Receiver Impedance Protection

Accommodates 14 to 22 gauge speaker wire

Spring Loaded Wire Connectors

Dimensions (H x W x D): 2.1875" x 17" x 4.875"

Steel housing and rubber feet

Passive Design, No Power Required

Pre-printed zone labels for easy speaker connection and identification

Designed and Engineered in the USA

Full Instructions Included



Theater Solutions Roll of C100-16-2 Wire

100 Feet of CL3 Rated Two Conductor Speaker Wire

16 Gauge, 65 Strand and SRPVC Ultra Flexible Insulation

UL Listed, Sunlight Resistant and Burial Grade for All Outdoor Speakers

Use for All Class 2 and 3 Circuits

ROHS Compliant, ETL Certified and Oxygen Free Copper (OFC)



Applications:

Home Audio Systems

Whole House Audio Systems

Business / Office Audio Systems



This Listing and Price is for 1 Speaker Selector Box and 1 Roll of Wire

• Theater Solutions TS8 passive 8 zone speaker selector box, connects up to 8 pairs of speakers at 4 to 16ohm, one to all zones can be engaged at the same time
• Handles up to 300W RMS per channel, amplifier or receiver impedance protection, accommodates 14 to 22 gauge speaker wire, spring loaded wire connectors
• Dimensions are (H x W x D) 2.1875" x 17" x 4.875", steel housing and rubber feet, passive design, no power required, pre-printed zone labels for easy speaker connection and identification
• Theater Solutions 100 foot roll of C100-16-2 CL3 rated 2 conductor speaker wire, 16 gauge, 65 strand, SRPVC ultra flexible insulation, sunlight resistant, burial grade for indoor or outdoor speakers
• Use for home audio systems, whole house audio, business or office audio, this listing and price is for 1 speaker selector box and 1 roll of wire

Product description

Specifications



Theater Solutions TS8 Eight Zone Passive Speaker Selector Box

Connects up to 8 pairs of speakers at 4 to 16Ohm

One to all zones can be engaged at the same time

Handles up to 300 watts RMS per channel

Amplifier/Receiver Impedance Protection

Accommodates 14 to 22 gauge speaker wire

Spring Loaded Wire Connectors

Dimensions (H x W x D): 2.1875" x 17" x 4.875"

Steel housing and rubber feet

Passive Design, No Power Required

Pre-printed zone labels for easy speaker connection and identification

Designed and Engineered in the USA

Full Instructions Included



Theater Solutions Roll of C100-16-4 Wire

100 Feet of CL3 Rated Four Conductor Speaker Wire

16 Gauge, 65 Strand and SRPVC Ultra Flexible Insulation

UL Listed, Sunlight Resistant and Burial Grade for All Outdoor Speakers

Use for All Class 2 and 3 Circuits

ROHS Compliant, ETL Certified and Oxygen Free Copper (OFC)



Applications:

Home Audio Systems

Whole House Audio Systems

Business / Office Audio Systems



This Listing and Price is for 1 Speaker Selector Box and 1 Roll of Wire

• Theater Solutions TS8 passive 8 zone speaker selector box, connects up to 8 pairs of speakers at 4 to 16ohm, one to all zones can be engaged at the same time
• Handles up to 300W RMS per channel, amplifier or receiver impedance protection, accommodates 14 to 22 gauge speaker wire, spring loaded wire connectors
• Dimensions are (H x W x D) 2.1875" x 17" x 4.875", steel housing and rubber feet, passive design, no power required, pre-printed zone labels for easy speaker connection and identification
• Theater Solutions 100 foot roll of C100-16-4 CL3 rated 4 conductor speaker wire, 16 gauge, 65 strand, SRPVC ultra flexible insulation, sunlight resistant, burial grade for indoor or outdoor speakers
• Use for home audio systems, whole house audio, business or office audio, this listing and price is for 1 speaker selector box and 1 roll of wire

Product description

PyleHome Model : PSS6

6-Ch. Stereo Speaker Selector

6 Channel High Power Stereo Speaker Selector

• Up to 6 Separate Speaker Pairs to Your Stereo System
• Accepts Speaker Wires up to 14-Gauge
• Handles 100Watts per Channel w/ Speaker Systems That Have Minimun Impedance of 8 Ohms
• Protection Circuitry Keeps It Running Smoothly
• Frequency Response: 20Hz-20KHz
• Dimensions: 9.05''(W) x 1.85''(H) x 5.90''(D)

This speaker selector box allows you to play audio to up to six different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.

• THE NUMBER 1 SELLER 6 ZONE SPEAKER SELECTOR:The New and Improved Multi Zone Speaker Selector Can Play 6 Sets of Speaker at the Same Time or What Ever Speaker You Want to Control or a Pair of Speaker from High Powered Amplifiers.
• CONTROL YOUR POWERED 6 CHANNEL AMPLIFIER:You Can Control Any Amplifier from Pyle Crown Denon Sony Panasonic Yamaha and Many More.also Control 4 10 4 6 8 Inch Speaker Box.
• PLAY ANY COMBINATION SETS OF SPEAKERS AT ONCE.:The Pyle speaker switch box Is great help for controlling ceiling speakers Wall Speakers home theater rooms monitor speaker loud speakers from all sizes 4 6 8 12 inch
• PLUG AND PLAY EASY INSTALL.The Pyle speaker distribution hub Is passively powered by your stereo - only need to plug in the wires.Its a good idea to add labels on the buttons for the different speakers so you don't have to remember each zone is
• WORRY-FREE SHOPPING: With the Pyle multi speaker switch we are confident of the quality of our product, therefore, we offer a 30 day money back guarantee no questions asked

User questions & answers

Question:	I am installing in-wall speakers in multiple rooms. My question is what is the best cheapest in-wall volume controller that would work with this speaker selector
Answer:	There is no difference in for the install if you mount speakers in the wall or ceiling.
Question:	Several questions, How do you hook it to your stereo, I am hard of hearing so I hooked 3speakers to my stereo system,this is hooked to my tv when I turn it up some times it turns off by it self I do not understand that I would like more speakers all the 5 star reviews makes this product sound real good. the receiver
Answer:	I think so. They mount with a screw and clamp. The screw is accessible behind the removable front grill. The speaker comes with a template so you know what size to cut out in the wall or ceiling. After you insert the speaker into the recess, as you turn the screw, it tightens the clamp onto drywall, securing it in place. Although it is designed for drywall, I think it will work on anything with approximately the same thickness (~3/4 inch thick).
Question:	How Do You Hook A PSS6 Speaker Selector To A Pyle PCAU46A
Answer:	I would recommend a 5.1 home audio receiver.
Question:	can i play all 6 speakers at the same time
Answer:	The pyle pta44bt would be a good amp for the speakers.

Product features

Premium New and Improved 6 Zone Channel Speaker Switch Selector Switch Box Hub Distribution Box

This speaker selector box allows you to play audio to up to six different stereo speaker sets. It easily handles up to 100 watts per channel with speaker systems that have a minimum impedance of 8 ohms. Each input has an on/off switch. Protection circuitry keeps it running smoothly and prevents speaker burn-out. Accepts speaker wires up to 14 gauge.