12 best tram cb radio antennas
Tram CB radio antennas are designed specifically for Citizens Band (CB) radio systems. CB radios are used for short-distance, two-way communication, often in vehicles or as base stations. Tram is a well-known brand that manufactures various types of CB radio antennas and related accessories. Here's what you need to know about Tram CB radio antennas:
Purpose: Tram CB radio antennas are designed to enhance the transmission and reception capabilities of CB radios. They are essential for improving the range and quality of CB radio communication.
Types of Antennas: Tram offers a range of CB radio antennas, including:
- Fiberglass Whip Antennas: These are flexible, durable antennas made of fiberglass.They are available in various lengths and are suitable for mounting on vehicles.
- Magnet-Mount Antennas: These antennas come with a magnetic base, making them easy to attach to the roof or trunk of a vehicle.
- Base Station Antennas: Tram also manufactures antennas designed for use as base stations, typically installed on a fixed location, such as a home or office.
Compatibility: Tram antennas are designed to work with CB radios operating within the 27 MHz frequency range, which is standard for CB communication.
Installation: Installing a Tram CB radio antenna typically involves mounting it in a suitable location, such as the roof of a vehicle or a high point for base station antennas. Proper installation is crucial to ensure optimal performance.
Cable and Connectors: Tram antennas often come with coaxial cables and connectors to facilitate the connection between the antenna and the CB radio. It's important to use high-quality cables and connectors to minimize signal loss.
Tuning: Tuning the antenna to the correct frequency is essential for optimal performance. Some Tram antennas may require adjustments to match the CB radio's frequency for maximum signal transmission and reception.
Range and Performance: Tram CB radio antennas can significantly improve the range and clarity of CB radio communication. The exact performance will depend on factors such as antenna height, terrain, and surrounding obstacles.
Maintenance: Regular maintenance, including checking for loose connections and cleaning the antenna, can help ensure consistent performance over time.
Legal Considerations: When using CB radios and antennas, it's important to comply with local regulations and CB radio licensing requirements, if applicable.
Tram is just one of many brands that produce CB radio antennas, so it's essential to choose an antenna that suits your specific needs and installation requirements. Additionally, consulting with fellow CB radio enthusiasts or professionals can provide valuable insights and guidance on selecting and installing the right CB radio antenna for your setup.
Below you can find our editor's choice of the best tram cb radio antennas on the market
TRAM 703-HC Center Load CB Antenna Kit
Tram
Product description
Get your CB connected with the Center Load CB Antenna Kit from Tram. 703-HC includes a 2" tall antenna that covers all CB frequencies, 3" magnet mount, shock spring, stainless steel whip and 9.5-feet RG58 cable with PL-259.
- Covers all CB frequencies
- Includes 3.5" magnet mount, shock spring, stainless steel whip & 17ft RG58 cable with PL-259
- Great for all your needs
- 2 Feet Tall
- Covers All Cb Frequencies
- Includes 3.5" Magnet Mount, Shock Spring, Stainless Steel Whip & 17- Feet Rg58 Cable Pl-259
User questions & answers
| Question: | is it magnetic or does it have glue |
| Answer: | The base is attached to the top of your car or truck by a strong magnet. No glue is involved. This device is designed to be easily removable and moved to another vehicle or protected from car washes. |
| Question: | Judt got this and i get just static when mounted on my truckroof |
| Answer: | Static is normal on CB radios, Some days are much clearer than others, mainly due to skip conditions. Try adjusting RF gain if your CB has one or use the squelch control. Both are forms that adjust to mask out noise but will reduce pickup ability on the receiving end. It is somewhat of an art form. Experiment with one or both. |
| Question: | will this work on Uniden 800 MHz 300-Channel Base Mobile Scanner (BC355N |
| Answer: | no, CB antenna's are tuned to 26 to 27 Mhz, You need a scanner antenna, most of which are tuned to 25 to 1300 Mhz |
| Question: | Can I tune the Antenna |
| Answer: | The top of the antenna is adjustable via a set screw to tune if you use an SWR meter. |
Tram 3700 Trucker CB Antenna, Standard Packaging
Tram
Product description
Transmit and receive signals farther than with any other center loaded mirror mount antenna! The Tram 3700 Trucker CB Antenna offers 3,700 watts power handling with a 6 in. stainless steel tapered whip, center loaded heavy-duty coil and thermoplastic round coil holder for extremely low noise reduction.
- Center Loaded Heavy-Duty Coil
- 3,700w Power Handling
- Thermoplastic Round Coil Holder For Extremely Low Noise Reduction
- Transmits & Receives Farther Than Any Other Center Loaded Mirror Mount Antenna
- Connector type: HDMI to DVI
User questions & answers
| Question: | Intructions say to insert whip until it stops. It only goes about 1/2 inch. Is that normal |
| Answer: | With Allen set screw loose it should go in about 1 1/2" to bottom out |
| Question: | Will this screw into the antenna base located on the hood of my f150 Ford? If so, will it interfere with my stereo (radio) transmission |
| Answer: | If you are talking about your stereo antenna the answer is no it is a much thicker diameter and this is for a c b radio not a stereo. |
| Question: | is this just a "screw and play" system |
| Answer: | The tram 3700 is tune from the factory to cover legal channels. I have 1.2 to 1 SWR from channel 1 to channel 40 |
| Question: | what is the total lengthof this antenae |
| Answer: | 52 " from bracket holding it to the tip |
CB Antenna 4" Magnet Kit w/RG-58 Coax & Rubber Boot, TRAM 300
Tram
Product description
Have the option to install your CB antenna kit on your roof or your trunk with this Magnet-Mount CB Antenna Kit from Tram(R). This antenna features weather-channel capability, 300W power handling and a 26 MHz-30MHz freq range. Your kit includes a 35", stainless steel whip, 3.5" magnet, a rubber boot on the magnet for scratch resistance and a 17-ft coaxial cable.
- 35 7/16" Stainless steel tapered .100" (2.5mm) whip
- Weather channel capability
- Excellent receive and transmit.17 ft. RG58A/U low-loss precision communication RF coax cable, tinned copper braid 95% shield, stranded tinned copper center conductor and solid insulation
- Pre-tuned for all CB frequencies
- Frequency range 26-30 MHz
- 4" Heavy duty magnet
- Rubber boot on magnet for scratch resistance
User questions & answers
| Question: | Will this work with a vhf mobile radio |
| Answer: | It is a cb antenna only. |
| Question: | Uniden 510xl swr to high 2:1 have a k30 antenna should i change and what kind of antenna |
| Answer: | Thats also a good antenna its up to you. |
| Question: | how long is the antenna from the magnetic base to the tip |
| Answer: | Mine is around 39-1/2 inches bottom of the magnetic base |
| Question: | Has anyone ever not received their 35 7/16" Stainless steel tapered 100" (2.5mm) whip in their shipments before because I didn't receive mine |
| Answer: | Never received the wip! |
Tram CB Base Antenna
Tram
Product description
Choose tram for your next antenna installation Project with this CB base antenna! this 3 ft. Antenna is omnidirectional. Stay connected with tram.
- Uhf female so-239 Connector
- 500W 3ft tall
- Omnidirectional
User questions & answers
| Question: | do these have a swr adjustment on them |
| Answer: | SWR can be adjusted using an external antenna matcher or changing the coax length- |
| Question: | is there a recommended coax length for this antenna and what power can it handle |
| Answer: | Coax is any length.CB can only be 4 watts how ever i checked this antenna with SWR meter it was right on.I think for a little antenna it power could be the best you can give it. |
| Question: | I'm a ham operator, and need a stealth antenna. has anyone actually used this on 10 meters instead of cb? if so, did you need a antenna tuner |
| Answer: | There's a video about this antenna under a different name. The product is sold under various brands but seems to be the same antenna. Enter "antenna b100 erod1944" in the YouTube Search Engine. I used it on 10 Meter JT-65 with a good SWR. A SWR test on 10 meters starts at about 7:30 on the video. |
| Question: | what is the length of this antenna |
| Answer: | Overall length is 37". |
TRAM 3-B-HC Fiberglass CB Antenna (Black, 3 feet)
Tram
Product description
This tram 1,500W CB antenna has a heavy-duty fiberglass construction and a frequency range of 26-29 MHz and covers the complete CB band. It has a 3/8 inch x 24 thread mounting.
- Heavy-duty fiberglass construction
- Freq: 26-29 MHz
- Covers complete CB band
- 1,500W
- 3/8-Inch x 24 thread mounting
User questions & answers
| Question: | Does this come with one or two antennas |
| Answer: | No, it only has one antenna |
| Question: | Does this antenna need to be grounded |
| Answer: | All antennas should be grounded. |
| Question: | Does this come with the stud mount |
| Answer: | No it doesn’t |
| Question: | I have a tram magnet antenna. Could I replace that antenna with this one. Both are screw ins |
| Answer: | No. The dimension of the screw is much larger than that of the magnet mount. Plus the size/resistance of the fiber glass antenna to the wind would make your magnet unstable. I do recommend the fiberglass over the one you currently have however. A couple of drill holes and a 90° adjustable connector will keep the antenna low profile when not in use. Google images of "fold over amatuer radio antenna adapter" to see what I'm talking about. Good luck. |
Tram CB 5In Magnet Mount Antenna, Black (240-B)
TRAM
Product description
Choose tram for your next antenna installation Project with this CB 5 in. Magnet mount antenna (black). this antenna uses a 3/8 in. X 24 thread mounting. Stay connected with tram.
- Black steel Magnet housing
- 17ft low-loss rg-58 a/U coax cable: tinned copper braid 95%, solid insulation, stranded tinned copper center conductor
- Pl-259 male Connector
- 3/8 inch -24 thread mounting
- With rubber boot
User questions & answers
| Question: | Will this mount be able to hold a hustler 102inch whip |
| Answer: | It will not hold a 102 inch whip without the wind blowing it over all the time. You must use a short antenna on this or by the three bass magnetic for a 102 inch whip |
| Question: | Will this work with a radio from President electronics |
| Answer: | As should as long as the radio has a SO-139 connector. |
| Question: | What additional height does this add to a 28” antenna |
| Answer: | No more than 2 inches, I think. |
| Question: | Will it work on a tram3700 trucker antenna |
| Answer: | Yes this base takes an antenna with a 3/8 inch -24 thread mounting and that’s what the tram 3700 has. Buy it your good to go!!! |
Tram 1185 Amateur Dual-Band Magnet Antenna
Tram
Product description
Stay connected with the amateur dual-band magnet antenna from tram. This 19-inch antenna has a frequency range of 144-148 MHz/435-450 MHz and easily mounts with 3-inch magnet. It also features a black finish, unity gain vhf/2.5 DBD gain uhf and a 12-foot rg-58 cable with uhf male Pl259.
- Complete with antenna, magnet & cable.
- Transmits 2 meter VHF & 70cm UHF (144-148Mhz & 430-450Mhz).
- 3" magnet mount with 12' RG-58 coaxial cable & PL-259 connector.
- Antenna unscrews from magnet with regular 5/16"-24 thread.
User questions & answers
| Question: | where manufactured |
| Answer: | To get this item as cheap as it is, do you really have to ask? It is made in China. |
| Question: | Would this work well for receiving out of band (i.e. for a police/fire/aircraft scanner, specifically a SDR USB receiver |
| Answer: | Most police, fire and aircraft are within range, not exactly sure what a SDR USB receiver is. However, where I use it more is just above 470mhz. SWR is 1.1 I can tx and rec from my repeater which is 48 miles and on the opposite side of a hill with normally no issues. Hope this was helpful |
| Question: | Will this antenna transmit properly on the band split between 164.000 and 166.000? Thanks. Silvio/Paraguay |
| Answer: | No. The reason for the 2-band utilization of this single antenna is harmonics (of wavelength in this case). It would work just mediocre on receive (almost any antenna of 50-ohm can be used for receiving, it's just a matter of how well it will work), but would not work properly on transmit and would likely burn out your finals in the radio if you tried to use it for transmitting after a few minutes (too much power would be reflected back into the radio). Don't buy this for 164-166 MHz. Find the correct antenna. |
| Question: | What is the max power rating |
| Answer: | Product Description 1/4 Wave AntennaFrequency (MHz) 144-148 & 440-450Product Narrative Magnet Mount AntennaUsable Bandwidth 4/10 MHzGain (dB) 0/2.5Maximum Power (Watts) 75Whip Length (In.) 19"Whip Material Stainless steelColor Black Base/Stainless Steel Black WhipMount Type MagnetCable 12' RG-58/UConnector PL-259 |
Tram Amateur Dual Band Base Antenna
Tram
Product description
Choose tram for your next antenna installation Project with this amateur dual-band base antenna! this 17 ft. Antenna has 2 frequency ranges: 144Mhz to 148Mhz and 430Mhz to 450Mhz. Stay connected with tram.
- 8.3Dbd gain vhf 144mhz-148mhz
- 11.7Dbd gain uhf 430mhz-450mhz
- Omnidirectional
- Heavy-duty fiberglass construction
User questions & answers
| Question: | what connector do I need on the antenna end of my coax? Also, what diameter galvanized pipe do you suggest |
| Answer: | This antenna takes the larger PL259 coax ends, as found on most 50 Ohm coaxial cables. I ordered that from Amazon as well. Radio Shack has the cables in 20 foot and 50 foot a bit cheaper, but doesn't seem to be the same quality as what Amazon has. As far as the pipe goes, the mounting bracket that comes with the antenna will handle 1 inch to 2 inch pipe. I split the difference with 1-1/2 inch pipe. |
| Question: | Will this antenna need solder work later on, like the comet gp |
| Answer: | Dale We have two of the antenna's up now for a year and have had NO problems at all,have had to do No soldering. |
| Question: | can this antenna be used for 11 meters too |
| Answer: | for 11 meter band you need a regular cb antenna |
| Question: | Is this a tram 1480 or tram 1481? the photo seems to show a tram 1480, but the item number in the description says |
| Answer: | The item I ordered was a tram 1481 and that is what I received, just as the description stated. |
Tram 1411 Broad Band Discone/Scanner Base Antenna
Tram
Product description
Tram provides premium antenna components that provide functionality and durability of the antenna to deliver quality communication connections you depend on. Each antenna model is carefully planned and developed to ensure great transmission over many uses. The Scanner 25MHz1, 300MHz VHF/UHF Super Discone Base Antenna Plus CB Transmit Bands will offer premium service for years to come.
- Wideband reception covering 25-1300 MHz
- Transmit bands 26-27-46-49-72-144-220-440-900-1290 MHz
- Rust free stainless steel structure
- Max power 300 Watts CB / 200 Watts VHF-UHF
- SWR <1. 5: 1
- 1 3/8" maximum mast diameter
- UHF female (SO-239) connector
User questions & answers
| Question: | Will this work https://www.amazon.com/channel-master-antenna-steel-cm-1805/dp/b000sonaj6/ref=sr_1_4?ie=utf8&qid=1547360230&sr=8-4&keywords=channel+ma |
| Answer: | 1 3/8" (35mm) maximum mast diameter |
| Question: | Would this work on a 2 meter ham radio |
| Answer: | I don't have mine up yet, but it says it will. Antenna Frequency Range is 25-1300 MHz. 2 meter band operates 144-148 MHz. |
| Question: | How does this differ from the Tram 1410? I know the 1411 has a whip but what does that get you? Better transmit or additional frequencies |
| Answer: | Hi Gadget,They are both wide-band HF-VHF-UHF receive antennas. They are full broadband for receive only (like for a scanner) and are both optimized for Amateur Radio bands for transmitting. For transmitting, the 1410 is limited to VHF & UHF frequencies at 200W max. The 1411 will transmit on all three bands with 300W max on HF and 200W max on VHF & UHF; this one has tuned radials and an additional vertical whip for HF. Here's a link to look at: http://www.theantennafarm.com/catalog/antennas-191/base-antennas-193/discone-scanner-base-antennas-256/BTW: Tram is an aftermarket knockoff of Diamond Discone Antennas (as well as other manufacturers). They work, but the quality is much less than Diamond. |
| Question: | Can you use 1-1/4" conduit as a mast or does the end need to be tapered |
| Answer: | 1 1/4" emt conduit was a hair too big to fit into mine. |
Tram 269 Triple 5" Magnet CB Antenna Mount
Tram
Product description
This Tram Triple 5" Magnet CB Antenna Mount is sturdy and attractive with a black kote steel magnet housing. It comes with a 17-ft RG-58A/U coaxial cable, UHF male PL-259 and standard 0.375" x 24 thread CB mounting.
- Black Kote Steel Magnet Housing
- 17-ft Rg-58a/u Coaxial Cable
- Uhf Male Pl-259 Installed
- Standard 0.375" X 24 Thread Cb Mounting
User questions & answers
| Question: | Will this hold a 102 whip |
| Answer: | It holds my 102" wipe with the monster spring |
| Question: | Can this mag mount hold yaesu atas 120a |
| Answer: | I seriously doubt that ATAS-120A would work with this mount. First, the connector here is a CB mount connector and not UHF connector. Second, ATAS 120A requires direct connection to the body of the vehicle since the antenna is tuned by DC current and not AC. Unlike RF, DC cannot pass through the rubber and roof paint. |
| Question: | What ham radio antennas will work with the this? I'm looking for 2m/70cm. Thanks |
| Answer: | For a 2m/70cm antenna, you do not need this beefy of a mount. A 1/4 wavelength antenna is about 19 inches high. I use a Diamond MR77 mag mount that works great. If you were to use a 5/8 wavelength 2m antenna, something like a 5" mag mount would be good. This is more suited to a 7 1/2 foot HF type fiberglass whip or "maybe" one of the CB whips. I have one as a backup and like it. As of this writing, my primary HF antenna is a series of MFJ Hamtennas and a Diamond K-400 mount. Just make sure with this mount that you minimize capacitive reactance as good as possible if running HF or with an amp. I would put two mix 31 toroids in-line with about 6 turns each to make sure there is no RF on the coax if you use it for HF. For a 2m/70cm antenna, don't worry about any chokes. And also, for 2m/70cm, you do not need anywhere near the ground plane that HF requires. |
| Question: | Does this mag mount come with rubber covers on the magnets to protect the paintwork on the car roof |
| Answer: | Rubber covers would increase capacitive reactance...defeating any ground plane your car could offer as the other half of the antenna. The mount needs to make contact with the metal in order for the vehicle to serve as the other half of the antenna. While I'm sure it would have some effectiveness being close to the metal, it will not establish a ground properly. It does have a Mylar film on the bottom of the magnets, but moisture and scratches will get under any mag mount. Over time, any mag mount will rust around the edges where the Mylar film meets it. Some the contaminants are regular grit and grime, while some is brake dust and other components. I have this as a backup mount for vacations in other cars, etc. It would be possible to use it as a base antenna mount if 1/4 wavelength radials were fun out from the base. I use a Diamond K-400 mount as my primary mount. The mount is only part of the equation. It requires a decent antenna. My own antennas are an inexpensive answer. I use MFJ Hamtennas (fiberglass whips) for each HF band I use. They are about 7 1/2 feet high, but with a quick disconnect, it is closer to 8 feet high, plus the height of what they are mounted on. I would like a Scorpion screwdriver antenna if I had a spare $900 laying around... Any mag mount is only so strong. If mounted on the roof, I would recommend a cable to your rack in case you have a frontal collision. The mount would turn into a missile. That super grip is on thick metal in the ham radio or CB store. While it seems like a strong mount when you are trying to pull it loose from the roof of a car, it is in fact not nearly as strong. |
Tram 1607-HC 46-Inch VHF Marine Antenna
Tram
Product description
Covers all marine band frequencies 3 DBD gain heavy duty fiberglass construction complete with nylon ratchet mount for easy lay down stainless steel hardware 20ft rg-58 cable easy screw off pl-259 connector for small hole installation
- Covers All Marine Band Frequencies
- 3 DBD Gain
- Heavy Duty Fiberglass Construction
- Complete With Nylon Ratchet Mount For Easy Lay Down
- Stainless Steel Hardware
User questions & answers
| Question: | Will this work with a uniden um380bk |
| Answer: | Yes it will. |
| Question: | Does it work as FM antenna with the combination adapter |
| Answer: | Yes you can buy a splitter for your FM reception needs |
| Question: | why does this antenna require a battery |
| Answer: | It does not require a battery. The description is wrong. |
| Question: | Can this antenna be used on a gmrs radio |
| Answer: | I am amateur radio operator N8VJM. I use antennas like this one and its "Big Brother" the 8' (co-phase) version. They tune up well enough to be used on 2 m (144-148 MHz Amateur Radio Band) a-well-as on 70 cm (420–450 MHz Amateur Radio Band). I run up to 50 watts without damaging the finals in my transceivers and more power with external amplifiers. GMRS and FRS have many channels at power levels of 5 w and lower, but some are as high as 50 w. Don't be fooled by thinking that SWR readings are an accurate measure of how useful an antenna and transmission line system are. The gain you achieve with a 46" antenna (in this case) should far outweigh the losses of the mismatch (as shown by higher-than-normal SWR) versus a 6.3" plain whip intended for GMRS/FRS use. I don't gamble, but I would be willing to bet money that people in-the-know (experienced radio operators, techs, and engineers) are using similar antennas successfully. The seller cannot recommend that you try using this antenna OOB (out-of-band) because they would then be liable if it didn't work well for you or damaged your equipment. You might even try a split ferrite bead about 6 or 7 inches down the coax from the antenna. It should serve to lower your SWR to protect your finals and may even improve performance. Bottom line, this is a $40-something antenna. I think you can probably shell out that much for an experiment. Worse case scenario, sell it on eBay for just about what you paid for it (if it doesn't work well for you). |
TRAM 1480 Amateur Dual-Band Base Antenna
Product description
Reduce your precipitation static and lower your background noise with the Tram Amateur Dual-Band Antenna. This 8 ft. , 2-section antenna features a heavy-duty fiberglass base station, an insulated conductor, a 144 to 148 MHz/440 to 450 MHz frequency range, 6 dBd gain VHF/8 dBd gain UHF, and a power capacity of 200 watts. Accepts mast diameters from 1. 81 in. to 2. 44 in. . Includes bracket and three 20. 5 in. radials.
- 8-ft tall
- Heavy-duty fiberglass construction
- 144-148 MHz/430-450 MHz
- 6 dBd gain VHF/8 dBD gain UHF 200 watts max
- 2 sections
User questions & answers
| Question: | Does anyone know if the elements in this are end fed or center fed |
| Answer: | End feed. The radiator is center fed. The ground plane is end feed. |
| Question: | what is the overall length of the Tram |
| Answer: | Just a little over 6 feet in length. The mass assembles by a coupling in the middle. The radials are about 10 inches in length. The gain on the antenna is excellent. I read the reviews on line but needed to check this out. The antenna works very well on both band. I have Cushcraft and other name brand antennas and the Tram rates well against their performance. |
| Question: | looked around the net and found that this antenna does have an so-239 connector. does anyone know if it is adjustable for swr |
| Answer: | Yes. The antenna can be broken down into two halves, and the antenna inside the hard (and quite durable outer casing) is adjustable. The inner antenna connect in the middle and the connector is tightened with a provided hex wrench. The casing has screw together connector that can be tightened by hand. By the way, the antenna has markings to show exactly where the two halves come together for a very close if not spot on swr. I followed the indicator and had a low ratio. |
| Question: | OK on the 2 clamps (that's good). But is the base termination PL-259? A cable? A NMO mount? The picture just shows an unknown stub w/o description |
| Answer: | The TRAM 1480 antenna has a SO-239 connector so you need a coaxial cable with a PL-259 connector. The picture shown is not the TRAM 1480. The TRAM 1480 is a two sections antenna. |
Latest Reviews
View all
Monopod With Rc2 Heads
- Updated: 09.03.2023
- Read reviews
Extra Large Cork Board
- Updated: 03.03.2023
- Read reviews
Foldable Cooler
- Updated: 20.01.2023
- Read reviews
Value Brass Nozzles
- Updated: 06.05.2023
- Read reviews
Weight Loss Smoothies
- Updated: 27.05.2023
- Read reviews