10 best monopod with rc2 heads

Product description

☸ Specifications:

☞  Quick release plate suits for  DLSR / mirrorless camera / camcorder / telecamera / telescope / action camera

☞ Port Compatable with ① 1/4" tripod or tripod ball head,②3/8" tripod or tripod ball head with a screw adapter,③tripod ball head with quick release plate slot.

☞ Max loading: 22lb/10kg

☸ Features:

☞ Material: Aluminum alloy

☞ Color: Black(body and plate)

☞ Quick plate size:1.97inch * 1.58inch(50mm*40mm)

☞ Size (L*W*H): 3.03〞×2.48〞×1.18〞(77mm × 63mm × 30mm)

☞ Item weight: 0.31lb (140g).

☸ Package includes:

☞ 1 xQuick release plate adapter body

☞ 1 x 200PL-14 Plate

☞ 2 x 1/4" to 3/8" Conversion Adapter

☸ Warranty Policy:

☞Life time warranty, spare part free(exclude shipping)

• 【Dual Fail-Safe】Once quick plate was pushed inside goove, finger wrench will be locked by a spring equipment , and also we can lock finger wrench with a hasp again
• 【Compatible Quick Plate】The quick release plate design is similar to manfrotto 200-PL14, compatible with manfrotto XPRO
• 【Universal Compatibility】Portable with 2 pieces 1/4" conversion adapter to easily/quickly mount camera or other equipment with 3/8" screw, also the rapid adapter can mount on Manfrotto tripod or tripod ball head
• 【Spirit Bubble Level】Easily make level for quick release plate
• 【Loading Capacity】Body and QR plate is made of aluminium alloy, max loading: 22lb/10kg

User questions & answers

Question:	Will this fit the manfrotto compact light aluminum 4-section tripod kit with ball head
Answer:	No I don't think so, you would probably have to get some masonry toggles with matching bolts.
Question:	Will this fit on a sima st 30 c
Answer:	Yes i think its 38" each of them. hope this helps
Question:	Does the 323 qr clamp accept peak design plates
Answer:	The description says 4 straps. Yes I was able to place an upper and lower strap.
Question:	Does the 323 QR plate have a D-ring on the underside or do you need a screwdriver to attach it to camera
Answer:	If you have studs or wood backing behind the stucco it could work. The kit comes with 4 lag bolts and flat washers to anchor to studs (or whatever).
Question:	Wat is the overall height of the head
Answer:	Hello. This unit heats water by 16°F at a flow rate of 1.5 GPM (and a proportionately lower temperature rise with a higher flow rate, and higher temp. rise with lower flow rate). All tankless water heaters operate on the same principle. Therefore for example, at 1.5 GPM when the incoming water temperature is 70°F or more, the output temperature will be at least 105°F. (70 + 35 = 105. And 105°F is what many people feel is a comfortable hand washing temperature.) Kitchen sink flow rates vary from 1.5 to 2 GPM. Add together the flow rates of all the points of hot water use that you will definitely be using simultaneously. Then compare that GPM with the 35°F temperature increase at 1.5 GPM potential to see if it will produce at least 105°F. But you may want to wash dishes in hotter than 105°F. If it will not get to 105°F at your incoming water temperature, and your needed flow rate(s), then choose another model with more kW and amps, and ensure that you can supply it with the required electrical capacity. Not sure now? Then please read our article here which explains this in full: https://blog.gadgetsgo.com/how-to-buy-an-electric-tankless-water-heater (or blog.GadgetsGo dot com and find the article "How to Buy an Electric tankless water heater", if the link doesn't work). If this heater won't work for you, please gather the info in #1 thru #4 in our article, and we can suggest some alternatives. Feel free to ask us any other questions. GadgetsGo is an Authorized Eemax Distributor. Kind Regards, John M. GadgetsGo
Question:	Does this head rotate on the monopod without rotating the monopod itself
Answer:	Yes, it will fit any size water heater up to 80 Gallons.
Question:	the 2 first product pictures here are from different products
Answer:	Yes, each strap is 90'' long. Thank you for your inquiry,
Question:	What size replacement plates do i need? mine broke. does manfrotto just sell the plates
Answer:	Personally I would never use it one a 1200 watt sub but that’s me. i follow a rule myself so that my subs last longer than most. for a 1200 watt sub i would use a 1000 watt amp just to ensure you don’t blow your sub. example i’m using this amp on a 1400 watt 12” boss and it’s almost too much for the sub. Hope this helps!

Product description

The XPRO Monopod Aluminium 4-section with Fluid Video Head is a professional full fluid video monopod made to satisfy videographers who leverage the height of their monopod to get above crowds and to achieve a wide range of shooting angles. These state-of-the-art Manfrotto legs have inherited the perfect combination of rigidity and locking safety of professional tripod ranges, like the 190 collection and 055 collection. This monopod is equipped with Manfrotto’s full fluid base (MVMXPROBASE) featuring the innovative FLUIDTECH system that makes Manfrotto XPRO Monopod+ the first of its kind on the market to feature 3D fluidity. The FLUIDTECH video base enables the ultimate shooting smoothness on pan, tilt and swivel for an expanded range of perspectives. The three retractable feet make it extremely portable when folded and allow the monopod to be easily carried everywhere. The new D-shaped aluminium tubes greatly improve anti-rotation resistance throughout the monopod, following the videographer’s rapid rotation movements. Combined with the Quick Power Lock (QPL) which strongly locks the lever onto the monopod tube’s flat side, this eliminates unwanted jerky movements. The newly designed leg warmer guarantees exceptional grip and full footage control with a special version of the successful Manfrotto 500 video head . The MVMXPRO500 replaces the Manfrotto MVM500A

• FLUIDTECH base for smooth movements in all directions
• Quick power lock reliably secures & ensures super-fast set up.Maximum Working Height: 79.9 inches. Folded Length: 30.7 inches
• Newly designed rubber leg warmer for fast & secure movement
• Great operating height for overhead shooting. Dedicated professional video head
• The MVMXPRO500 has one Easy Link 3/8 inch connector to fit an external monitor or other accessories and it comes with the Manfrotto 500PLONG video camera plate

User questions & answers

Question:	How does this compare to the carbon fiber version
Answer:	Cheaper maybe a tad heavier
Question:	Several reviewers mentioned that you can't pan with one hand using a handle. But since it is a monopod, can I twist the whole tripod around to pan
Answer:	Yes you can
Question:	What is the length closed
Answer:	Approx. 26 1/2" from end to end.
Question:	Do I need to secure the camera with one hand all the time
Answer:	On flat or mostly even ground, you don't. If you want to do any kind of panning you will need to hold it.

Product features

Manfrotto XPRO Monopod+

The Manfrotto XPRO Monopod+ family of photo and video monopods brings to the market the innovative FLUIDTECH Base for smooth footage and the possibility to convert photo monopods in video monopods.

Thanks to the improved fluidity and the superior performance of the leg, the XPRO Monopod+ ensure incredibly smooth footage, ultra-sharp photos and creative shooting perspectives.

FLUIDTECH Base

First of its kind, the full Fluid Video Base delivers the ultimate smoothness in an extremely compact solution for advanced video shooting.

Quick Power Lock

Quick Power Lock system ensures extreme locking grip released with the movement of a single hand for a rapid and easy set up.

Ergonomic and easy to carry

The new aluminium d-shaped tubes together with the leg warmer guarantee excellent ergonomic grip and full control during the movement.

Versatile: Photo and Video

Thanks to the removable FLUIDTECH Base, the monopod can be easily used for both photo to video application.

• 【Compact but Durable】 Premium materials with aluminum, more lightweight, more max load weight.A folded length of 26", weighing only 3.9 lb and max load 13.2 lb , this video monopod kit is ideal for travel and fast moving situations like sporting events,travel and outdoor shooting
• 【Pivoting Mini Metal Tripod】The monopod base enables 360° swiveling, 45° tilting in all directions and 90° drop-notch allows easily switch from landscape to portrait modes; locked in the upright position via its patented Vertical Lock, the removable base can be used as a small table-top tripod
• 【Multi-function Pan Tilt Head】Features pre-set counterbalance, pan/tilt locking with 3/8" easy link connector for accessories, offers 360° panning and +90° / -70° tilt; Integrated Flat Base with 3/8"-16 thread makes the head versatile for most tripod, slider, jib or crane
• 【Easy Set Up】This Camera Monopod Suitable for all SLR, DSLR, Video Cameras plus Camcorders up to 13.2 lbs. The 5-section aluminum monopod leg extends to 73" fully equipped with ergonomic flip lock providing fast leg extension; by using a supplied Y-style key, the tightness of each flip-lock on the monopod leg can be adjusted according to the respective requirements
• 【Specifications】 8-years warranty | Adjustable Height: 26" to 73" | Tilt Range: -75° to +90° | Pan Range: 360° | Max Load: 13.2 LB | Carrying Bag | Fluid Head | Monopod Leg | 3-Leg Tripod Base and Monopod Travel Bag Included

User questions & answers

Question:	Nikon p1000? Anyone tried with this mono
Answer:	I have the Sony A7iii camera with 1/4" thread hole that fit with the screw on the monopod.
Question:	Is there a way to remove the tri-folding feet
Answer:	Yes it unscrews rather easily
Question:	I am considering using this with the 360fly 4k, but I'm concerned the pan bar & handle will be in the image; Can the pan bar & handle be detached
Answer:	The pan bar and handle can be detached (and it actually comes detached), but it can also be adjusted so that it doesn't show up in your image.
Question:	Is the quick release plate interchangeable with a manfrotto
Answer:	The Coman plate is NOT compatible with Manfrotto 2" slide clamps, such as the one on the Manfrotto 562B-1. The Coman is a 1 and 13/16th" slide clamp, so it's 3/16" too narrow to use with my Manfrotto clamps. Even when the clamps are fully tightened, the space is still 1/8" too wide, so the plate will slide right off. I'll post pictures with my review.

Product features

COMAN Professional Camera Tripod

Lightweight, highly durable, quick and easy to set up

KX3232 monopod + Q5 Fluid Head + 3-leg unipod holder to give you a versatile still or video camera support system.

Smooth fluid movements combined with an advanced balancing system – 360° horizontally and +90°/-75° vertically, the best choice for recording with a video camera, camcorder, or DSLR.

Q5 Fluid Head

KX3232 Monopod

Product description

The Manfretto 234RC is a Simple tilt head to allow a camera on a Monopod to be turned 90° to provide either vertical or horizontal format. With quick release camera plate system and secondary safety lock.

• Allows vertical photography from a monopod
• Built in quick release

User questions & answers

Question:	Is it sturdy enough to support a Canon 5D Mark II with 100mm macro lens vertically (lens pointed at ground
Answer:	Hello, if the zomei m8 has 1/4" screw hold,then it will fit.
Question:	Would this fit a Canon monopod
Answer:	I am sorry, we are not sell the base at present.
Question:	Why do I need a Monopod Head quick release for my monopod
Answer:	Hello, the quick release plate has 1/4" screw hole on the bottom, if the vivitar vpt1200 have the 1/4" screw interface, then it will fit it. Thanks.
Question:	Would this head fit onto Manfrotto tripod
Answer:	Hello, it is a base mount and a quick release plate.

Product description

The cleverly adaptable fluid camera head. Getting perfect results quickly is hassle free thanks to the Manfrotto 128RC Micro Fluid Video Head. This smart camera head is specially designed for cameras weighing up to 4kg, and it has plenty of design friendly features to make every shoot a doddle. Professional fluidity on both the pan and tilt axes make your movements super smooth and sure. A quick release camera plate comes as part of the package, so you can set up in moments and get your camera connected fast. This video head is made to look good and last. The painted black aluminium body is designed to withstand even heavy use, and it’s versatile too. The flat base enables you to connect a variety of tripods, so you can mix and match as needed depending on the job in hand.

• Smooth fluid movement
• Secure quick release system for easy installation and removal of cameras
• Adjustable for left or right handed operation
• Supports up to 8 pounds

User questions & answers

Question:	Would this head support a 24-inch slider and a sony a7s and the 16-35mm lens? Or would I have to mount the slider directly to the tripod legs
Answer:	Yes, you can. And we recommend it, then you can monitor 7/24.
Question:	Does this stay level without tightening down with a full sized scope or big telephoto lens
Answer:	No, it can not record sound. please note.If you really need it,you can contact our customer service.
Question:	I will be using this for filming soccer games for my son on an old Bogan tripod. I concerned about the horizontal panning left to right
Answer:	Sorry, it can't be used as a real smoke detector.It just a hidden camera which looks like smoke detector.
Question:	Will fit properly on a slik 700dx tripod. will the bases line up properly. what is the diameter of the base where it meets the tripod
Answer:	It takes micro.

Product description

The quick release plate has a 1/4" screw for all cameras. Additional QR plate available.Base has a 3/8" screw thread for universal mounting to tripods and monopods. If your pod has a 1/4" screw, we can provide step-up adapter to make it fit.

• Professional ball head with quick release
• Smooth 360 degree movement
• Single lever control for quick action
• Load capacity: 9 lbs

User questions & answers

Question:	How does a buyer request the 1/4" adapter the seller says it will provide
Answer:	I would too!!! but maybe direct from Andoer?
Question:	Can someone link me to an adapter so this item will fit my normal sized tripod
Answer:	Yes, it will fit. Understand the supposedly Arca type clamp is far smaller than a standard Arca-Swiss clamp and plate. My question is how securely this wilool hold a D7000 and a 70-300 lens. Decent qualoity heads start at $150-$200. At this rice point I would not bet on it holding.
Question:	i'm planing on using this ball head on a dslr (d7100) slider mostly i will be using the slider for timelapse shooting. do you think its stable enough
Answer:	All cameras work. Almost every single DSLR or smaller camera made takes a 1/4" screw.
Question:	Is the down hole 1/4" to atach to a monopod or need an adapter
Answer:	Beike Camera Quick Release Plate Universal Mount for Tripod Ball Head BK-03 Q999 Q666 Q555 Rangers Koolehaoda Pergear Head.with 1/4 Inch Standard Screw Arca Swiss Compatible https://www.amazon.com/dp/B0725YYSXF/ref=cm_sw_r_cp_api_i_CdeICbEZVF9WD

• Patenet CLAW quick release design and creative cold shoe design--ULANZI patent design offers camera quick release, vlog microphone mount solution.
• Slide lock, safe and secure--Slide lock to avoid damage of mistouch.
• Available for CLAW system--Quick release top cap mount could connect CLAW series products, swtich easily and quickly.
• 20KG bearing load--Metal CNC processing supports up to 20KG weights.
• 1/4 to 3/8 Screw Adapter and a 3/8 " bottom screw thread--You can attach it to your tripod, monopod or camera slider for adding more flexibility in angle changing.

• HIGH STABILITY: Low-profile ball head design create stronger locking force and higher stability. Screw knob is located on the side of the ball instead of the bottom of the ball head bring 15% down the whole center of the gravity of the Ball Head, enhance stability
• WIDE COMPATIBILITY: Equipped with 1/4 screw, the removable quick release plate is suitable for all SLR cameras. 3/8 screw hole at the bottom can be attached to tripod or monopod
• FREE ROTATION BALL HEAD: Screw knob can quickly tighten or loosen the ball and allows it to move freely in all directions
• SMALL AND PRRTABLE: Height only 68mm/ 2.68inches, Weight only 197g/ 0.43lbs, easy to carry
• STURDY AND DURABLE: Max Load up to 10 kg/ 352.74 ounce, made of aluminium alloy material, it is very strong and durable

User questions & answers

Question:	Is this Arco Swiss compatible
Answer:	The Denon AVR X4300H is the same form factor and a replacement for the 3313ci and the X4000. I have both the 3313ci and also the X4000. This fits like a glove exactly on top with no overhang. It is also totally silent, I have it in smart mode. Where before I was measuring 103F watching a 5.1 movie, I have it set to 82 degrees and it'd been keeping the receiver within 2 degrees of that set point. One great way to extend the life of expensive electronics.
Question:	What is the capacity/load for this
Answer:	Hi Aah924!Thank you for your inquiry.This may potentially be the option that you are needing, but depending on how your cabinet is configured, that would be the determining indicator on which unit would be more useful for your application.The AIRCOM T9 is primarily used in applications where the top would have openings to allow warm air to be exhausted. Quite a bit of modern cabinets tend to be designed around this design.The AIRCOM T8 is primarily used in applications where the rear of the enclosure would be exposed. This allows the air to be immediately re-directed out of that specified range. We refer to this as the "book shelf" styled layouts (due to it resembling the library book shelves).We greatly appreciate your interest and consideration in regards to our cooling products!Warm Regards,Tommy KaragiasAC Infinity
Question:	Is this 501 PL compatible
Answer:	Hi Tony! Thank you for taking the time to reach out to me with your question! The AIRCOM T9 does not come with "rack ears". These are however readily available through Amazon and other websites. I have included a link to the Amazon page specializing in these products (see below). https://www.amazon.com/Premium-Rack-Mounting-Ears-Screws/dp/B01JWJYY24 Thank you and have a wonderful day! Andrew Avila AC Infinity
Question:	Is this Arco Swiss compatible
Answer:	From my research all you need is a 1/2" of clearance from the top. It work's superbly and love it. Keeps my flagship reciever 20-30 degrees cooler. Hope this helps.

Product features

Neewer Low-Profile Ball Head 360 Degree Rotatable Tripod Head for DSLR Cameras Tripods Monopods

NOTE:Please use the low-profile ball head within its maximum bearing weight

NOTE: Tighten all knobs when using the low-profile ball head

• The prefect low-profile ball head design create stronger locking force and higher stability. The screw knob is located on the side of the ball instead of the bottom of the ball head bring 15% down the whole center of the gravity of the ball head that can enhance stability
• The removable quick release plate is Equipped with 1/4 screw that is suitable for all SLR cameras and 3/8 screw hole at the bottom can be attached to tripod. or monopods.
• Screw knob can quickly tighten or loosen the ball and allows it to move freely in all directions
• The height of the ball head is 68mm/ 2.68inches and its weight is only 197g/ 0.43lbs. It is very easy to carry.
• The max load of the ball head can up to 10 kg/ 352.74 ounce and the aluminium alloy material makes it strong and durable.

• 📹 Red Dot Design Award Winner: IFOOTAGE Corba 2 Series Monopods; 2017 Red Dot Design Award Winner (product design award); designed for easy operation and longevity. This monopod is ideal for travel and outdoor shooting.
• 📹 Detachable Design: 4 section design allows for flexibility in use. Our award winning quick release plate and removable trippod stand provide 3 options: 1) Fixed video monopod with adjustable feet, 2) Portable monopod, 3) Low angle camera pod for a variety of uses.
• 📹 Telescopic design: Award winning buckle design make it to easy extend from 5.3 inches to 71 inches. Suitable for all SLR, DSLR, Video Cameras plus Camcorders up to 22 lbs. Premium materials with Carbon fiber, more lightweight, more max load weight.
• 📹 Pivoting Tripod: The monopod base enables 360° swiveling, 90° tilting in all directions and allows easy switches from landscape to portrait modes.
• 📹 Quick Lock and Unlock Release: Single hand operation. No buttons, no twisting, just a simple slide down to release and slide up to lock.The perfect suitable fluid head with ASIN: B07GR211GZ.

User questions & answers

Question:	how difficult should the quick reales be to screw into sony A7iii? Does not seem to want to go on straight for me
Answer:	I haven’t tested with that camera. However I was looking to get that camera. Might need an adaptor. I’m currently using it with an Sony AX-53 and have no issue. Have you tried just attaching the quick release plate by itself?
Question:	Is the Manfrotto 502AH too big for it
Answer:	please check the screw hole of your manfrotto 502AH is 3/8" or 1/4", the screws of our monopod is 3/8" and 1/4" changeable. It can support both 3/8" and 1/4" screw hole.
Question:	Does this work as a monopod for the Go Pro 360 Max
Answer:	It should. I use it with the Ricoh Theta V 360 camera all the time and love it. It’s the best monopod I have ever used!
Question:	will this work with zhiyun Crane
Answer:	It is working perfectly with My Pilotfly h2.

Product features

IFOOTAGE Cobra 2-C180

Lightweight, highly durable, quick and easy to set up -- IFOOTAGE offers three adjustable feet and IFOOTAGE’s patented quick release system on our new 3-in-1 monopod. One minute it’s a true monopod reseting on its removable rubber foot, the next it’s standing tall on it’s own three feed allowing 360° controlled movement via its tension control/lock at its base. Traditional tripods now have a serious rival!

Product description

The compact advanced 3-way head features an inventive, foldable three-way head for great stability and accuracy in framing your subject. This tripod is target at more advanced photo enthusiasts who own an entry level DSLR with standard zoom lenses up to 200mm. This three-way head has two Independent, ergonomic levers. One controls both pan and tilt movement simultaneously whereas the second controls leveling. With these two control-levers, you can easily obtain level, well-framed images and regulate all movements independently. This head has been specifically designed to minimize dimensions and maximize portability. A unique mechanism allows the levers to be folded when the head is not in use, making the tripod easier and more convenient to carry. The high performance three-way head combined with reinforced, five-section tubes make this tripod The optimal solution for rigidity whilst also being able to reach the superior height of 165cm/65in when extended. rapid center column closed length 17.32 in column tube diameter 22mm front tilt -30 degree/ +90 Degree panoramic rotation 360 Degree

• Quick release
• Foldable 3-Way Pan/Tilt Head
• Supports up to 6.6lbs

User questions & answers

Question:	What is the maximum weight this tripod can support
Answer:	As Alfar 3 said, it is about 2.2 inches, or if you prefer metric, 5.715cm.
Question:	will it hold canon 7d n 18-200 lens securely
Answer:	No, the head does not rotate around the long axis of the monopod. It only tilts about 90 degrees either right and left or up and down depending on how your camera is mounted.
Question:	Can this tripod be used to take macro shots of flowers/insects/etc on the ground
Answer:	Not sure what you are asking. All three came in the package I received and the two spare plates fit the bracket just fine.
Question:	Is it sturd
Answer:	Yes they do, and there are also third parties who make less costly replacement plates. The standard Manfrotto plate is: Manfrotto 200PL https://www.amazon.com/Manfrotto-200PL-14-Connect-Mounting-4-Inch/dp/B001A1RMXG/ref=sr_1_3?ie=UTF8&qid=1510849084&sr=8-3&keywords=Manfrotto+200PL Here's a less costly compatible plate from another source: https://www.amazon.com/Release-Connect-Adapter-MANFROTTO-498RC2/dp/B005IWZYA6/ref=sr_1_1?s=electronics&ie=UTF8&qid=1510849174&sr=1-1&keywords=zaykir+rc2+quick+release+plates

Product features

Manfrotto Compact Light

Born to Be With You Always

Ultra lightweight, portable, and effortless to use, the Compact Light is an indispensable tripod for any circumstance. It's time to get the best out of your compact system cameras.

Manfrotto Compact Action

Made for Photos and Movies

Super intuitive, ergonomic, and versatile, with the Compact Action you can finally realize the potential of your entry-level DSLR. Your images and movies will never look the same again.

Manfrotto Compact Advanced

Great Stability and Precision

Rock solid, precise, and portable, the Compact Advanced with 3-Way Head will support your standard zoom lens and entry-level DSLR so you can take your photography to new heights.

Manfrotto Compact Smart

Universal Smartphone Clamp

The Universal Smartphone Clamp is featured with the Compact Smart, and it is designed to attach your smartphone to a tripod thanks to the two 1/4'' female threads located at the base and on the back of the clamp.

Protective Bag

Padded bag for safe and comfortable transportation.

Compactness and Intuitiveness

Flexible, lightweight, and optimized for CSC and DSLR cameras.

Stability Across the Range

Leg structure you can rely on for sharp and detailed images every time.