10 best antenna mount for cb

• Aircraft Quality Aluminum
• Stainless Steel Hardware
• ABS Material Stud
• Specifically Designed for Wilson and Heavy Shaft Oil Can Type Antennas

User questions & answers

Question:	I’ve got a 3/8 x 24 102” whip can I use it for the antenna just hook it up and go and is it tuneable
Answer:	Yes the threads are the universal type identical to the Wilson and should match up perfectly.
Question:	My chevy mirror arm is to wide for a standard antenna mount any suggestions as to what i should buy. goes on a 2013 chevy chassis rv
Answer:	Dont know off hand but there are standard for any mount ,wilson road pro ,stryker,firestick nrver had one not to fit on antenna I use a wilson gumdrop mount with a 102 inch steel whip.it want work on a magnet mount.
Question:	Can i combine this with the wilson
Answer:	No, it is only a spring, to put between the mount and antenna.
Question:	so i'm confused with the cables? what's the difference between pl259 and so
Answer:	I’m not sure.

Product features

Wilson 305-700 Aluminum CB Antenna Mount with Gum Drop Stud

The aluminum CB antenna mount with gum drop stud is specifically designed for Wilson and heavy shaft oil can type antennas. Made of aircraft quality aluminum with stainless steel hardware and an ABS material stud it also has a SO-239 connector for plug to plug hook-up.

Features:

• Aircraft quality aluminum
• Stainless steel hardware
• ABS material stud
• SO-239 connector for plug to plug hook-up

Product description

FireStik HEAVY DUTY SO-239 STUD MOUNT for CB RADIO ANTENNA (BULK) K-4A

• FOR ANY 1/2" HOLE
• FITS ALL FIRESTIK ANTENNAS AND MOUNTS
• BULK ITEM. NO RETAIL PACKAGE

User questions & answers

Question:	how many come in the package
Answer:	One and it sucks it fell apart using a 4 foot fire stick antenna
Question:	How would you mount these antennas behind the cab of a f 550 flat bed
Answer:	You would need the L-bracket to mount to the back of the cab. If you bed has the security frame at the cab you can mount to that with a bracket.
Question:	In assembling in the mounting bracket, you have 3 washers. 1 flat, 1 locking and 1 plastic isolator. as far as the isolator, top or bottom
Answer:	Plastic on the bottom next to the bracket, then the flat washer to protect the plastic from the locking washer and the lock washer on top next to the nut.
Question:	I am looking to remove my firestik and put a ham antenna there. looks like this is the adapter? 3/8-24 rf female to sma female adapter
Answer:	This is 3/8 x 24 to SO239.

Product description

SO-239 Stud Mount for any 1/2" hole. Made with Outstanding Design and Material Quality Chrome Plated Machine Brass and Nylon Insulators 3/8 X 24 THREAD. FITS ALL FIRESTIK ANTENNAS AND MOUNTS.

• SO-239 Stud Mount for any 1/2" hole.
• 3/8 X 24 THREAD
• Chrome Plated Machine Brass and Nylon Insulators
• Made with Outstanding Design and Material Quality

User questions & answers

Question:	Would this mount to a spare tire rack on a ford bronco
Answer:	It should. A lot of room for adjustment with the long bolts. Give it a go.
Question:	I'm using this with 64" whip and have some higher swr readings tried to ground it and just got worse. Any suggestions
Answer:	The SWR IS AFFECTED BY THE WHIP LENGTH, AND THE GROUND. THE ANTENNA MUST BE RESONATE THE THE FREQUENCY YOU ARE USEING. CHANGING THE WHIP LENGTH WILL CHAGE THE SWR (STANDING WAVE RACHIO). THE TYPE OF COAX IS ALSO IMPORTANT. MAKE SURE YOU ARE USING A COAX OR (FEED LINE) THAT IS WHITHIN THE RANG OF OHMS REQUIRED. MOST RADIOS REQUIRE A 50 Ohm COAX. SO IN THEORY A 50 Ohm COAX AND AN ATTENA SET AT 50 Ohms WILL GIVE YOU A 1-1 SWR. WITH LOW POWER YOU CSN GET BUY WITH A 1.5-1 SWR. I HOPE THIS WAS HELPFUL.
Question:	Can it fit coax with PL-259 barrel-style ends
Answer:	The pl-barrel is used to connect two cb cables .
Question:	Will this work with 4' pro stick
Answer:	Yes I us on a moter home works good .Glenn Moore

Product description

The TeraFlex TJ CB antenna mount provides a simple way to mount a CB antenna to your TJ. The bracket installs between the passenger side brake light and the body. Drilling is optional, but not required.

• Jeep TJ/LJ / YJ / CJ CB Antenna Mount Kit Passenger Boxed TeraFlex
• Country of Origin: CHINA
• Fit type: Vehicle Specific
• Package Weight: 0.885 kilograms

User questions & answers

Question:	How thick is the metal
Answer:	About 3/16
Question:	The picture shows a driver side mount....discription says passenger
Answer:	So the 1912092 is the passenger side and the 1912091 is the drivers side.
Question:	Will these work with some metal corner guards
Answer:	You might have to get longer mounting screws, and if it's diamond plating it might not sit totally flush, but I don't see why not.
Question:	Does this bracket go under the light
Answer:	You have to remove the light and it bolts on behind it using the factory holes

Product description

Easily mount a CB antenna and a flag whip to your JL Wrangler/Unlimited with this bolt-on JL: CB Antenna & Flag Whip Mount Bracket Kit. The included Tailgate Accessory Mount Studs mount in place of the factory tailgate studs for a clean installation.

• Fits: JL Wrangler (2-door) JL Wrangler Unlimited (4-door)
• CB Antenna Mount
• All necessary hardware
• Fit Type: Vehicle Specific

User questions & answers

Question:	Does this work with aftermarket tire carrier
Answer:	It basically replaces the bolts of the factory hinge with longer ones, but wouldn't be able to confirm if they're long enough for the aftermarket tire carrier/hinges
Question:	Will the holes on this mount also fit an antenna that uses either a nmo or a so259 (uhf) connector? i am not familiar with cb antennas. thank you
Answer:	I believe the antenna mount hole is standard 5/8 inch. I went to Right Channel Radios and bought a heavy duty right angle mount (16.00) that accepts the Firestix antenna and a so259 standard cb antenna cable. I used this because standard cb type stud mount was wobbly on the bracket. A nmo style cable would provide more stability also but you have to drill out (enlarge) the 5/8 hole. As a side note you need to grind off the paint around the mount hole and provide a ground wire from the mount bracket mounting stud through the tailgate to the body or the SWR will be to high (cb will have poor signal strength and have static ). I like the bracket and the suggested mount,no rust or corrosion after a year. Go to you tube and watch videos of installation.
Question:	Where I can get the flag pole that fit this bracket
Answer:	ANY FIRESTICK ANTENNA WILL WORK. OR A WHIP FOR THE SAND DUNES WILL FIT.
Question:	Can this fit on a JK
Answer:	No. There’re is a different one for your JK. The TeraFlex 4997190 Jeep Wrangler CB Antenna Mount will fit your Jeep JK. If you happen to have the TeraFlex HD Hinged Tire Carrier, then you will want TeraFlex 4838220 works with the aftermarket TeraFlex Hinged Carrier.

Product description

The Rugged Ridge CB/AM/FM Antenna Mount Kits ingenious new design delivers crystal-clear radio reception across all bands while maintaining the benefits of the factory JK antenna location. Replacing your factory antenna with our fully welded steel antenna mount will give you a convenient location to mount your choice of CB antennas (not included). The system includes the mounting bracket and all the necessary coaxial cable, wiring, connectors and hardware to complete the install- you just supply the antenna! No more whip antennas getting in the way of your rear lift gate or having to drill unwanted holes in your JK's body. With the Rugged Ridge CB/AM/FM Antenna System, your CB antenna will maintain the look of a stock setup but give you the advantages of an aftermarket antenna.

• ANTENNA FOR JEEP: The Rugged Ridge CB/AM/FM Antenna Mount Kits ingenious new design delivers crystal-clear radio reception across all bands while maintaining the benefits of the factory JK antenna location.
• JEEP WRANGLER ANTENNA: The after market antenna system includes the mounting bracket & all the necessary coaxial cable, wiring, connectors & hardware to complete the easy install. Features 4mm steel mounting bracket.
• OFFROAD ACCESSORIES: Get serious about the drive with a variety of off road Jeep accessories from entry guards & floor liners to entry guards, snorkel kits & antennas for a customized vehicle with top grade gear.
• RUGGED RIDGE JEEP PARTS: Count on Rugged Ridge to provide you with proven Jeep parts & accessories like bumpers, lift kits, wheels, interior accessories, floor liners & more for varying Jeep models
• FIVE YEAR WARRANTY: Our Rugged Ridge products are covered by industry leading 5 year warranty & Rugged Ridge Floor Liners have Limited Lifetime Warranties providing customers with repair or replacements subject to certain common exclusions.

User questions & answers

Question:	has anyone tried this with a HAM radio
Answer:	Depending on what ham antenna you intend to use, you would have to modify the mount to fit a NMO mount or UHF mount, get an adaptor 3/8” -> NMO or UHF, or use a 3/8” mount style dual band antenna. Also, that Multiplexer will be useless for a CB radio since it won’t allow you to xmit on 2m or 70cm. There are better ways to install a ham radio antenna than this product.
Question:	Will this work for a jeep yj
Answer:	No you would have to drill holes for the antenna mount. The YJ antenna is different
Question:	Will this fit a JT
Answer:	Yes it will
Question:	Is this compatible with the new JL’s
Answer:	Yes! I mounted it in my 2018 JLUR. I had it in my JK, but before I sold the JK I took it out so I could put it in my new JL.

Product description

Firestik Screw-On Flat Universal CB Antenna Mount Stainless Steel - Firestik SS-124A.

• FIRESTIK Screw-On Flat Universal CB Antenna Mount - Stainless Steel SS-124A

User questions & answers

Question:	Does anyone know the size of the bolt that actually attaches the mount to the car/truck
Answer:	3/8" bolt is what I used. Length depends on what your mounting to.
Question:	Can this connect to a firestick fire ring connector
Answer:	This mount would require a different stud to connect a fire ring cable. The correct stud is a K4R.
Question:	how long is it
Answer:	About 3.5inches with a bolt on one side
Question:	Will this be able to withstand a 102in. whip
Answer:	Yes. I have one with a whip. It will will need a spring for when you hit things (trees, drive throughs, etc).

• 16 Gauge Copper Wire for Handling 1000 Watts
• Computer Measured Copper Wire for Maximum Output and Reception
• Hermetically Sealed Coax Cable for Extra Protection
• 100 percent Non-Corrosive Clear Anodized Mounts with Stainless Steel Hardware

User questions & answers

Question:	Are the antenna ends 3/8-24 thread
Answer:	I would say no because in the folded position the transmit field would be distorted and the polarity of the antenna would be changed.Receive, maybe. Transmit NO.
Question:	How long is the wire
Answer:	12 feet of coax in the package I received today, 01-07-21.
Question:	Can you hook these up individually
Answer:	using a signal meter... not that expensive, it comes with specific instructions
Question:	Do these have to be grounded with a separate ground wire
Answer:	Yes they do! I put them on the bed rails of my pickup and ran it through the cab to the cb, hooked right up to the back of the cb like normal! No adapters!

• 16 Gauge Copper Wire for Handling 1000 Watts
• Computer Measured Copper Wire for Maximum Output and Reception
• Hermetically Sealed Coax Cable for Extra Protection
• 100 percent Non-Corrosive Clear Anodized Mounts with Stainless Steel Hardware

User questions & answers

Question:	How many feet are the coax cables
Answer:	Product Dimensions 2.5 x 0.2 x 2.3 inches
Question:	How do you tune these
Answer:	It worked great on mine
Question:	Do both antenna cable go from the 2 into 1. Hooking both up to one port on the CB
Answer:	No, its meant for mounting on the mirror arm of trucks. The hard plastic washer you see is an insulator for the antenna and not for any type of sealing
Question:	How far is the range of the antenna
Answer:	Yes. I believe it requires a 3/8" hole.

Product description

Stryker sr-a10mm magnetic mount Cb/10 meter radio Antenna

• 6 Gauge Solid Copper 100% Silver Plate Wire
• Extremely Efficient High “Q” Coil
• Powerful 5" diameter magnetic base
• 10,000 Watts Power Handling Capability
• 2 Year Warranty

User questions & answers

Question:	How long is the coax
Answer:	16-18’
Question:	Can you use this with gmrs systems
Answer:	For gmrs you're going to want a genuine Nagoya UT-72. Btech has the genuine article. I swept it with a VNA and it has very low SWR through the GMRS band. I also have a Nagoya mag mount with the SMA connector - the UT-308UV and it's not as broad on UHF. Good for the 70cm ham band, but it's SWR doesn't stretch into GMRS range as well.
Question:	can this be used on a DX2547 base radio
Answer:	Your gonna find its a damn great antenna but most base stations have a taller antenna but paired with my Stryker 497 getting 17 miles roughly
Question:	How would this work on a cobra
Answer:	I run a Cobra 29 LX w/ an Astatic RD104 mic and this Stryker antenna. SWR’s are near flat across all 40, TX & RX are amazing. I definitely recommend this antenna.