10 best wolverine mens riding boots

Wolverine Men's Floorhand 6 Inch Waterproof Soft Toe Work Shoe

Wolverine

Based on 4 reviews Check latest price

Product description

The Wolverine floor hand features waterproof full-grain leather with a removable full-cushion footbed to provide all day comfort. The rubber outsole will give you traction on slippery surfaces to keep you safe on the job.

Established in Rockford, Michigan in 1883, Wolverine is an iconic American brand that combines superior materials with timeless craftsmanship. Wolverine boots are built to withstand the toughest of environments and provide all day comfort. Today, Wolverine leads the industry with a relentless commitment to innovation and patented technologies including Wolverine Contour Welt, Wolverine MultiShox, Wolverine Durashocks, Wolverine Durashocks SR and Wolverine Fusion.

  • 100% Leather
  • Imported
  • Rubber sole
  • Shaft measures approximately ankle-high" from arch
  • Waterproof full-grain leather upper to keep your feet dry in wet conditions
  • Slip resistant rubber lug outsole to safely keep your footing in slippery conditions
  • Lightweight cement construction

User questions & answers

Question: do these boots have steel shanks
Answer: No
Question: my dads old work shoes say size 8M but this only had the option of size 8 would it be the same
Answer: No you can go right through the toll with it. It has a open square that goes toward the window. It’s great and looks clean on the window.
Question: If I’m a 12.5 and the 13 or to big should I get 12w or just
Answer: I live in pa. I just took my original tabs off my ex pass . Used some rubbing alcohol to get the remaining glue off. Put the ez pass in the silicone skin then put the new tabs on and put it on my windshield. I recommend cleaning the windshield where you are going to install it. Hope that helps
Question: My husband usually wears a 10.5 W, is this a 10.5E
Answer: I removed the original clear 3M Dual Lock tabs that were on my transponder to replace them with the all black ones that were included with the EZ Skin Bundle. However, the adhesive material completely failed after just six weeks. Even when putting on the black strips that came with this kit I had my reservations, because they did not seem to have as good of an adhesive material. I have since gone out and purchased black 3M Dual Lock strips from my local hardware store. I have never had any of the included clear 3M Dual Lock strips fail.

WOLVERINE Men's Hellcat Wellington Boot Construction

Wolverine

Based on 26 reviews Check latest price

Product description

Old school, meet new school. The Hellcat combines classic work boot styling and construction with revolutionary new UltraSpring cushioning for a lightweight energized ride never before experienced in a work boot.

  • Made in USA or Imported
  • Rubber sole
  • Shaft measures approximately Calf High from arch
  • Boot opening measures approximately 14 around
  • Premium waterproof full-grain leather upper. Breathable waterproof membrane with moisture wicking mesh lining
  • Removable Ortholite UltraLite full-cushioned footbed is light without sacrificing comfort
  • Revolutionary UltraSpring high rebound ETPU midsole provides energized ride

User questions & answers

Question: Are these insulated
Answer: Hello David, The power adapter for this unit is approximately 2.5 inches tall, 1.5 inches wide, and 1 inch thick. For further questions, please contact our support team via live chat or email request on our website. Have an amazing day! Haylee AcuRite Support Team
Question: Where are these boots made
Answer: The 10 inch red model that I have DOES have a dimmer which manually adjusts display brightness to 100%, 75%, 50%, 25%, or 10%. The 10% is dim enough for use in the bedroom. Additionally, it supposedly has an auto dimming setting, which does not appear to work on my unit. From what I read in product descriptions, the 14.5 inch and 18 inch models DO NOT appear to have adjustable brightness, perhaps explaining why all of the other answers to your question state no dimmer.

Wolverine Men's 1000 Mile Fashion Boot

Wolverine Heritage

Based on 290 reviews Check latest price

Product description

The original 1000 mile boot is recreated from an archival Wolverine pattern and is America's original work boot. Designed in Rockford, Michigan and handcrafted in the USA, each pair is made with meticulous attention to detail and built to last. Time-tested Goodyear welt construction allows the boots to be resoled for years of wear, and durable horween leather from Chicago gains character over time.

  • 100% Leather
  • Made in USA
  • Leather sole
  • Shaft measures approximately 6" from arch
  • leather
  • solid
  • leather-sole
  • round-toe

User questions & answers

Question: How can i ensure mine are authentic? bought them from amazon services llc
Answer: Random colors
Question: Will I look good in these running from the cops
Answer: I would assume so. My cat is in the 10-13 pound range and managed to wiggle his way out of it. I think he's too small.
Question: Are these dressy enough to wear with a suit
Answer: I think it works for any size of dogs. Sharp blade in one cut.
Question: Will I grow metal claws and the ability to heal if I buy these boots
Answer: Super accurate. I have the largest one, the error is only several seconds per year. Most accurate quartz clock I ever had.

Harley-Davidson Men's Tremont 6.5-Inch Motorcycle Boots, D96226 (Black

Wolverine

Based on 5 reviews Check latest price

Product description

Harley-Davidson Men's Riding Appropriate* Tremont 6.5-InchBlack Motorcycle Sneakers, D96226. Harley-Davidson Ashmont riding sneakers for men, part of the Black Flash Series. Built with a high-visibility reflective underlay to help you ‘Be Seen’, these sneakers offer a distinct Waterproof Reflective Leather with a natural raised grain made from optical grade glass. This is a complete unique look – using leather that is currently the only product on the market of its kind. Cement-constructed and made with waterproof full-grain leather and a breathable Hydro-Guard waterproof member that works to block any moister intrusion, they keep your feet dry and comfortable. The Tremont’s tough rubber outsole delivers the safe and reliable traction you demand, wherever your ride takes you, with top-rated performance that stands up to abrasion, slippage, and oil. Shaft height: 6.5", Heel height: 1.". Sizes US: M 7-12, 13. Manufacturer Part Number, D96226.

*Riding Appropriate – Abrasion, slip, and oil-resistant boots, ideal for riding motorcycles.

  • 100% Leather
  • Leather sole
  • Shaft measures approximately 6.5" from arch
  • Heel measures approximately 1 inches"
  • Waterproof full-grain leather with flash reflective upper
  • Breathable Hydro-Guard waterproof membrane lining
  • Cement construction

Harley-Davidson Men's Garston 6-Inch Black Motorcycle Boots D96188

Wolverine

Based on 6 reviews Check latest price

Product description

Harley-Davidson Men's Riding Appropriate* Garston 6-Inch Leather Motorcycle Boots, D96188. These full-grain leather boots have a color-changing overlay on the upper shaft that makes them distinctively different - the overlay is in the shape of flames and changes color. A debossed Bar & Shield logo faces the outside on the lower part of the shaft. With a smooth, rounded toe, a metal Harley-Davidson badge is on the bottom lace. There are six logo eyelets with one logo speed hook to finish off the lacing, which is made easy with YKK locking inside zippers with logo pull-tab. A padded tongue with a debossed Bar & Shield means your foot's chin remains comfortable throughout the day. A full-length mesh lining means you'll enjoy hours of carefree comfort, walking, standing, or riding with these boots. The boot's sole, insole and upper are bound using resoleable Goodyear Welt construction processes, the most labor intensive and durable construction method available. Rubber outsoles make for a nice and easy stride. Tread elements are enhanced with embossed logo graphics – Harley-Davidson is spelled out in orange. A circular Bar & Shield is embedded on the heel. Shaft height: 6-Inches, Heel height: 1.25-inches. Sizes US: M 7-12, 13. Manufacturer Part Number D96188.

*Riding Appropriate – Abrasion, slip, and oil-resistant boots, ideal for riding motorcycles.

  • 100% Leather
  • Lace-Up closure
  • Full-grain leather color-changing overlay upper
  • YKK locking inside zipper
  • Rubber outsole
  • Goodyear welt construction
  • Shaft height: 6", Heel height: 1.25"

Harley-Davidson Men's Lensfield 6.5-Inch Motorcycle Boots, D96204 (Black

Wolverine

Based on 9 reviews Check latest price

Product description

Harley-Davidson Men's Riding Appropriate* Lensfield 6.5-Inch Black Motorcycle Boots, D96204. These boots are vented and include Harley’s TFL COOL SYSTEM leather technology, which keep the boot’s surface temperatures up to 54-degrees cooler than standard leather when exposed to the sun rays over time. The heat resistant leather reflects infrared radiation for improved long-term thermal comfort. Additionally, the boot’s upper is constructed of breathable materials to allow air to flow in and out, providing even more comfort to the feet. The boots feature blacked out styling, suitable for motorcycling or any black ops mission tasking. A black metal Harley-Davidson medallion is on the bottom lace. The outside face of the boot has a black, classic Bar & Shield badge. With ribbed cushioning panels composing the top part of the shaft, and with a padded tongue, these boots are ready for whatever miles there are to be endured. Donning these boots is made easies with YKK locking inside zippers. Made with full-grain leather and mesh uppers with a full-length mesh lining. The boot's sole, insole, and upper are bound using resoleable Goodyear Welt construction processes, the most labor intensive and durable construction method available. With lightweight EVA and rubber outsoles, rated "BEST" for slip resistance, each step is carefree and easy. A Harley orange logo is embedded on the street side instep. Shaft height: 6.5", Heel height: 1.25". Sizes US: M 7-12, 13. Manufacturer Part Number, D96204.

*Riding Appropriate – Abrasion, slip, and oil-resistant boots, ideal for riding motorcycles.

  • 100% Leather
  • Leather sole
  • Shaft measures approximately 6.5" from arch
  • Heel measures approximately 1.25 inches"
  • Full-grain heat resistant leather and mesh upper; full-length mesh lining
  • YKK locking inside zipper
  • Goodyear welt construction with rubber abrasion toe cap

User questions & answers

Question: Are these steel toe
Answer: I have been using this kind of silicon claw caps for a long time, and I have't noticed any effection on my cat. So I think it's safe. But it's super glue, just be careful not to touch the skin or fur.
Question: how much do these boots weigh
Answer: No, you can't. But the package includes variety of colors, both for male and female are OK.

Harley-Davidson Men's Riddick 8-Inch Lace-UP Black Motorcycle Boots D98308

Wolverine

Based on 372 reviews Check latest price

Product description

Harley-Davidson Riding Appropriate Men's Riddick 8" lace-up black leather motorcycle boots. Full grain leather upper with Harley Bar & Shield badging on sides and a debossed Harley logo on the heels. Eight pair metal reinforced eyelets for secure fit. Abrasion resistant Tech Tuff overlays, providing high abrasion resistance, oil and stain resistance, and is more breathable and durable than traditional leather. Poron ankle protection is the top choice for extreme impact protection. Poron is built into the boots and is comfortable, flexible and lightweight while still absorbing more than 90% of energy when impacted at high strain rates. Shaft height: 8", Heel height: 1.5".  Features industry's best YKK locking inside zippers and an external YKK outside air vent zipper. Rubber outsoles designed to provide optimum traction, comfort and performance. The boot's sole, insole and upper are bound using resoleable Goodyear Welt construction processes, the most labor intensive and durable construction method available. Manufacturer Part Number D98308.

  • 100% Leather
  • Lace-Up closure
  • Full grain leather upper with Harley Bar & Shield badging on sides and a debossed Harley logo on the heels; Abrasion resistant Tech Tuff overlays, providing high abrasion resistance, oil and stain resistance
  • Built in Poron ankle protection is the top choice for extreme impact protection--comfortable, flexible and lightweight while still absorbing more than 90% of energy when impacted at high strain rates
  • Features industry's best YKK locking inside zippers and an external YKK outside air vent zipper
  • Rubber outsoles designed to provide optimum traction, comfort and performance; The boot's sole, insole and upper are bound using resoleable Goodyear Welt construction processes, the most labor intensive and durable construction method available
  • Shaft height: 8", Heel height: 1.5"

User questions & answers

Question: How tall is the boot
Answer: Yes, it is good quality.
Question: how long does shipping take? should I order my true size I wear a size 10 in most boots
Answer: I've been using them for 5 months and they are very sharp and easy to handle being short. Hope this helps.
Question: Do these boots have steel toes
Answer: Yes, you can easily cut your cat's nails.
Question: Are these available in widths
Answer: We put them on all claws.

Harley-Davidson Men's Reland 5-Inch Motorcycle Boots, D96229 (Black

Wolverine

Based on 2 reviews Check latest price

Product description

Harley-Davidson Men's Riding Appropriate* Reland 5-Inch Blacked Out Motorcycle Boots, D96229. These boots are vented and include Harley’s TFL COOL SYSTEM leather technology, which keep the boot’s surface temperatures up to 54-degrees cooler than standard leather when exposed to the sun rays over time. The heat resistant leather reflects infrared radiation for improved long-term thermal comfort. Additionally, the boot’s upper is constructed of breathable materials to allow air to flow in and out, providing even more comfort to the feet. The boots feature blacked out styling, suitable for motorcycling or any black ops mission tasking. A black metal Harley-Davidson medallion is on the bottom lace. The outside face of the heel’s counter has a debossed Bar & Shield logo. A ribbed cushion collar at the cuff and a padded tongue provide additional comfort for prolonged missions. Made with full-grain leather and mesh uppers with a full-length mesh lining. The boot's sole, insole, and upper are bound using resoleable Goodyear Welt construction processes, the most labor intensive and durable construction method available. With lightweight EVA and rubber outsoles, rated "BEST" for slip resistance, each step is carefree and easy. A Harley orange logo is embedded on the street side instep. These ready for anything boots will soon become your favorite choice. Shaft height: 5", Heel height: 1.25". Sizes US: M 7-12, 13. Manufacturer Part Number, D96229.

*Riding Appropriate – Abrasion, slip, and oil-resistant boots, ideal for riding motorcycles

  • 100% Leather
  • Leather sole
  • Shaft measures approximately 5" from arch
  • Heel measures approximately 1.25 inches"
  • Full-grain leather and mesh upper and a full-length mesh lining
  • Heat Resistant Leather, Ventilation
  • Goodyear welt construction with rubber abrasion toe cap

Harley-Davidson Men's Brake Light Motorcycle Boots, Twin Zippers. Wide D91680

Wolverine

Based on 96 reviews Check latest price

Product description

Harley-Davidson Riding Appropriate* Men's black leather motorcycle boots. Uppers made from full grain leather with an oil-resistant rubber outsole. The boot features a comfortable full-length soft cushioned lining affording hours of fatigue-free wear. Shaft height: 6.25", Heel height: 1.5".  They also feature undeniably reliable and durable YKK locking twin zippers for ease of putting on and taking off.  Soles finished using Goodyear Welt construction processes, adding years of use with proper care. These boots are riding appropriate. Manufacturer Part Number D91680.

*Riding Appropriate-Welt construction, abrasion and oil-resistant, re-soleable footwear ideal for riding motorcycles.

  • 100% Leather
  • Shaft measures approximately 6.25" from arch
  • Uppers made from full grain leather with an oil-resistant rubber outsole
  • The boot features a comfortable full-length soft cushioned lining affording hours of fatigue-free wear
  • They also feature undeniably reliable and durable YKK locking twin zippers for ease of putting on and taking off
  • Soles finished using Goodyear Welt construction processes, adding years of use with proper care
  • Shaft height: 6", Heel height: 1"

User questions & answers

Question: i have womens brake light boot in a 9. what size will i take in a mans size ? i tried my husbands men in 9. way too large
Answer: My cat is 11 lbs and one year old. He has been wearing this Soft Claws for many months. There aren't any nail marks or indentations on our floors or fabric. He still stretches and scratches on his scratching pad and my furniture but his nails just glide over the fabric. He doesn't hurt us our our pet bunny either because these are literally "soft claws". He acts like a normal cat but without super sharp needles for claws. Highly recommend!
Question: I am 9.5, what would be my size
Answer: No, the cats would not be able to climb trees with these because the covers are a soft rubber tip and prevents the tip of the claw form poking into things. If the cat did try to climb a tree the covers might let them get so much of a distance but not much because the its a smooth soft texture where the grip could not hold contact. But one bad thing about the covers are after a while they pop off and if your cat chews them off they come easier that way too. And there is no dumb question.
Question: Yes but they dont have 9.5 as an option on sizes
Answer: How Do I Remove Soft Claws? The soft claws paws nail caps fall off with the natural growth of your pets claws. As the nail grows, the outer layer of the claw sheds. You may have seen this in some of the soft claws paws nail caps that have already come off. Normally the nail caps fall off in about 4-6 weeks. Some may stay on longer and this is usually not a problem. The only problem that can occur is if the nail grows too long. Pets claws grow in a curved manner. If they are not worn down and grow too long, the nail will start to curve under the paw pad and may start to grow into the bottom of the pad. This usually occurs if the soft claws paws nail caps have been on for more than 10-12 weeks To Prevent this from happening, check your pets claws periodically to be sure they are not getting so long as to curve under the pad. If they are getting too long, just trim the tip of the nail cap. This will loosen the seal of the soft claws paws nail caps so you can remove it. If it does not easily come off, do not worry, leave it for a few days and it will generally come off on its own. You may want to gently try to remove the nail cap periodically. By trimming the tip, you will prevent the potential problem of the nail growing into the bottom of the pad. One note: You may find the outer layer of your pet's nail in the soft claw nail cap that is removed. This is normal because it is being shed with the nail cap. Once the nail tip is trimmed, you should be able to pull off the remainder of the cap. If not, the soft claw nail caps will fall off in a couple of days after the tips are trimmed. If you are unable to trim the tip on your own because the tip has grown so far into the pad, you will need to contact your veterinarian. If the Soft Claws Paws nail caps do not come off, another way to remove them is to trim away small amounts of the top part of the nail cap so that basically you "butterfly" the nail cap open. Trimming away the top ridge will allow you to peel open the soft claws nail cap and remove it from the nail. If you have not already done so, trim the tip of the soft claws nail cap first then start trimming the top ridge. The best type of clippers to use are the clippers specifically made for cats and Dogs. They like regular small scissors except the tips are crescent shaped instead of straight. Trim only small amounts of the soft claws paws nail caps away so you are basically "whittling" the nail cap away. Do not trim into the nail.
Question: Is there a size
Answer: Yes, I think it's suitable for small and medium sized pets.

Wolverine Men's Floorhand Waterproof 10" Soft Toe Work Boot

Wolverine

Based on 2 reviews Check latest price

Product description

This waterproof work boot is designed to withstand the tough demands that you face while on the job, all while keeping your feet comfortable with a removable full-cushioned footbed and rubber midsole.

Established in Rockford, Michigan in 1883, Wolverine is an iconic American brand that combines superior materials with timeless craftsmanship. Wolverine boots are built to withstand the toughest of environments and provide all day comfort. Today, Wolverine leads the industry with a relentless commitment to innovation and patented technologies including Wolverine Contour Welt, Wolverine MultiShox, Wolverine Durashocks, Wolverine Durashocks SR and Wolverine Fusion. Moisture wicking mesh lining to keep feet cool.

  • 100% Leather
  • Imported
  • Synthetic sole
  • Shaft measures approximately 10.75" from arch
  • Heel measures approximately 1.75"
  • Platform measures approximately 1.25 inches
  • Boot opening measures approximately 15" around

User questions & answers

Question: would you recommend these boots for working out in the southern California summer heat
Answer: They are very study. I have old JBl 4301’s on mine. Also have JBL 4311’s on the 28 in versions. Had no problems. Granted I don’t have children or pets. Didn’t use the carpet spikes, as we have hard wood floor.
Question: Will these work with a high instep
Answer: No, it's powder-coated mild steel just like the rest of the stand.
Question: How warm do these boots get working around 85-100 degree weather
Answer: The stand is 32" tall. I apologize for the confusion
Question: I work in rain, puddles, water spray, etc. Will these boots keep my feet dry after 8 hours of being wet
Answer: We are the distributor for the Soft Claw/Paw brand. They are the exact same thing. Some think paws are for dogs and claws are for cats but that's not right. Usually we sell Paws to Vets and Claws to consumers and Groomers. You are free however to order either .

Latest Reviews

View all