6 best budget fans

• 1.RGB Case Fan: Unlimited color transformation, One key to change RGB color.
• 2.High Airflow: 120 mm fan tuned for high-airflow and large volume cooling.
• 3.Super Quiet: Equipped with rubber pads and hydraulic bearing, which greatly reduce operating noise and improves efficiency.
• 4.6Pin interface to provides RGB FAN safe and reliable power output,Make the lights appear bright and colorful.
• 5.Two Way Installation:Easy for installation.You can either blow warm air out of the case or draw cool air into your case.

User questions & answers

Question:	Do the fans fit on a nzxt h510i case
Answer:	None, you must purchase leds that are included as a kit with the fans because it is a different control unit.
Question:	Will the 4 pin hub work with the gigabyte 450m dsh
Answer:	Hi there, it doesn't matter in which order you plug the fans in as the outcome remains the same. The one unit does not light up at all regardless of if it is plugged into fan 1,2 or 3 while conecting the other's at the same time. regards,
Question:	What led strips can you use with this kit
Answer:	There's no software for these fans, they are controlled only with the remote. A lot of devices nowadays use those little IR remotes so make sure they aren't being picked up by another RGB device. Otherwise yes the remote takes a watch battery, a CR2025 to be exact. If your PC case is thick and behind a bunch of stuff the receiver might not be picking up the remote signal. Hope that helps!
Question:	the fans are working but is no rgb lightings
Answer:	Remote

Product features

Super Quiet:

Equipped with rubber pads and hydraulic bearing, which greatly reduce operating noise and improves efficiency.

Long life:

The hydraulic bearing self-lubricates with a high-quality, friction-reducing substance, which lowers operation noise while improving thermal efficiency. The seal cap prevents lubricant leakage and extends the lifespan of the unit.

Double LED ring:

Maintain color and brightness uniformity. The lighting effect is visible from all directions and adds aesthetics to the chassis.

Specifications:

• 3 xRGB LED case fan
• 1 x RGB Controller
• 1x Remote control board
• 24 x rubber pad
• 12 x Installing Screws

Product description

The 60-in Energy Star rated Luray Eco unites smart efficiency and modern design concepts to offer unprecedented versatility. Featuring EcoMotor and a dimmable integrated LED light fixture and six speed wall control, the damp location rated Luray Eco is ideal for enjoying indoors and in covered outdoor living spaces. The current Emerson Ceiling Fan line will be re-branded as kathy ireland HOME. While the name will change, we want to reassure our customers that the product and our core values remain the same.

• 60” indoor-outdoor ceiling fan with light damp rated
• Energy Star ceiling fans with lights featuring Appliance White housing and white ceiling fan blades in a unique 3-blade design
• Use with the dimmable integrated LED for outdoor ceiling fans with lights or with the included ‘no-light’ plate
• High CFM output makes the Luray Eco a standout among outdoor fans and wet rated ceiling fans
• 4-1/2-inch white ceiling fan down rod included for your convenience

User questions & answers

Question:	can you use the fan feature without the light on
Answer:	The light switch works independently of the fan. You can work either or.
Question:	Is this fan reversible
Answer:	Yes this fan has a reverse function on the control.
Question:	does the fan come with a receiver? I want to buy a remote and don't know if the receiver is extra too
Answer:	Mine did not come with a remote control. It does come with a wall panel.
Question:	What is the degree of spread of the light beam
Answer:	Can’t get that technical but it will light up any room even on low I have the fan in my great room with a 22 ft ceiling and it lights up my living room and the loft upstairs

Product description

Who is Mr.Canicula?

Mr.Canicula is a cool computer fan too. we have PC products including fans(cooling & RGB),Protector chassis, water liquid cooling,controller and headphones. 

PC becomes our big toy when we grow up. We make friends, search  and keep learning the new stuff here. we laugh & cry here.The ARGB fans are selling online with 6 types of Light effects so far.

SPECIFICATION:

Speed: 1200rpm±10%

Noise Level: 25DBA

Input Power: 8.4±10%W

Rated Voltage: DC12V

Input Current: 0.7AAir

Flow:47.2 CFM

Life Time: 40,000Hrs

Hub Power Interface: SATA 15 Pins

Hub ARGB Sync Interface: 3 Pins---2 types for different sync 

Fans Power Interface: 3 PINS to Mobo

Fans ARGB Sync Interface: 3 Pins(Male & Female)

PACKAGE CONTENT

5 x RGB LED case fan

1 x Hub

1 x Remote Control

20 x Installing Long Screws

20 x Installing Short Screws

1  x User Manual 

NOTE:We also have 3 Pack ARGB Fans with Hub & Remote Control / 3 Pack ARGB Fans (FANS ONLY)

Please Order Mr. Canicula 3 Pack ARGB Fans (Fans Only) instead if you would like 4 pins to Molex

Power Supply.（Without Hub & Remote）

Here is the Interface Reference for 3 Pack  Fans Only Combo.

Power Interface:3 PINS to Mobo / 4 PINS to Molex

ARGB Interface: 3 Pins(Male & Female)

• 💿【Wide Compatibility】Mr.ARGB Pc fans with hub and remote could easily adapt to ASUS AURA/ MSI Mystic/ Gigabyte Fusion motherboard to sync.Fans with ARGB 3 pin plugs to sync.
• 💿【Easy to Install and Use】Mr.ARGB Case Fans with Interface:3 pin to mobo power, 3 pins (Female & Male) port for ARGB to sync.Hub Interface: Sata 15 pins, 2 kinds of 3 pins for MSI ASUS & Gigabyte.
• 💿【Cooling Down ARGB Case FAN】Case Fans cooling PC with high-airflow 120mm ARGB fan.Reaching the PC cool down with 1200±10% RPM & Offering awesome gaming lights effect.
• 💿【Ultra Quiet & High Efficient】55 CFM ± 10% Airflow with 24.8 decibels,the super silent building material & design can reduce the maximum noise to keep efficient.
• 💿【Worry-free Customer Service】We are always behind you.Please don't hesitate to write to us whenever before or after pruchase from Mr.Canicula ARGB Fans if you have doubt.

User questions & answers

Question:	How to control fan colors
Answer:	If you have a mother board with RGB controls or buy fans with remote control.

• Fan Blades Design:The 9 blades are designed for high-volume air delivery. They’re translucent, with a frosted texture, so the light from the LEDs adds a dramatic effect.
• Perfect Cooling Performance:Tuned for high-airflow, large volume cooling, silent operation as an excellent choice for case cooling.
• Long Service Life:Wear resistant hydraulic bearing construction makes the fan run noiseless and the air aolume larger with an astounding service life of more than 40,000 hours.
• PWM Control:The PWM function allows the motherboard to run the fan precisely at its necessary speed. This assures the required cooling and minimises the noise level.
• Two Way installation:Easy for installation.You can either blow warm air out of the case or draw cool air into your case.

User questions & answers

Question:	How long are the power cables
Answer:	nope
Question:	Any idea why the led only pops on for 2 seconds then slowly fades out? Happens on all three in the box
Answer:	No different plug
Question:	can i instal it in any cooler master case front pannel
Answer:	This kit used to come with a remote. I ordered it a couple months ago and it had it. It looks like they don’t include it anymore for whatever reason. I noticed even the ad picture when I bought it showed the remote. If you have a MB that can control rgb than the remote is pointless, but if you are using it on a lower end board without it than this kit is pointless. I also bought this other kit that was better and it came with 3 RGB fans and 2 magnet back rgb strips and a remote For roughly the same price. It’s easy to install and has held up well. The link for that one is.- https://www.amazon.com/gp/aw/d/B079JFHQMS?psc=1&ref=ppx_pop_mob_b_asin_title
Question:	So I’m gonna use these to keep a amplifier cool which wire is hot and which is ground
Answer:	Each fan only has 1 (4 pin) power cable which goes to the main controller. The main controller only has 1 cable which goes connects to a power supply.

Product features

Powerful LED illumination:

1. Low-profile WHITE LED, gives you bright and clean visual experience.
2. Stylish design with both LED (white, blue, red,green) options.
3. 12 high brightness LED lights for impressive lighting magic.

Powerful LED illumination:

1. Low-profile RED LED, gives you bright and clean visual experience.
2. Stylish design with both LED (white, blue, red,green) options.
3. 12 high brightness LED lights for impressive lighting magic.

Powerful LED illumination:

1. Low-profile BLUE LED, gives you bright and clean visual experience.
2. Stylish design with both LED (white, blue, red,green) options.
3. 12 high brightness LED lights for impressive lighting magic.

Powerful LED illumination:

1. Low-profile GREEN LED, gives you bright and clean visual experience.
2. Stylish design with both LED (white, blue, red,green) options.
3. 12 high brightness LED lights for impressive lighting magic.

Optimized Cooling Performance：

1. Balanced airflow and air pressure designed for perfect compatibility with your case or cooler.
2. 120mm PWM controlled fan with unique 9 blades design is engineered to generate higher airflow without compromising on ultra-silent operation.
3. Long life sleeve bearing for longer life expectancy.
4. Strong air flow to fortify cooling efficiency.
5. Silent operation as an excellent choice for case cooling.

Key Features:

• Bearing Type:Hydraulic Bearing
• Fan Dimension:120*120*25mm.
• Max Airflow: 21.7-49.7CFM (each)
• Fan Speed: 600-1700rpm±10%
• Rated Voltage: 12V
• Noise: 16.1-27.7db.A
• Connection: PWM 4PIN
• Life Expectation:40000H
• Weight:150 g

• 【Premium Cooling Fan】Increasing more colorful in the user's case by add the awesome RGB light in the FX-120 RGB Case Fan. Each 120MM rgb fan comes with 6 high-brightness LED lamp beads. Three 120MM fans provide excellent heat dissipation, add fun and bring you better gaming experience.
• 【Special Threaded Blade Design】The special 9-blade special thread design can minimize resistance and further improve fan performance. The output air flow reaches 31.68CFM under the standard of 1200 rpm, which effectively optimizes the air duct of the chassis and helps dust removal.
• 【Effective Shock Absorption Design】FX-120 case fan is surrounded by 4 soft silicone cushions which widely decreased the noise from fan vibration under high speeds.Highly optimised low-noise design provides outstanding quietness of operation. The maximum noise of the fan is only 18dBA. Quiet sound like falling leaves. The noise reduction technology and heat dissipation performance are greatly help customers to build a perfect case cooling system.
• 【High Performance Hydraulic Bearings】FX-120 fan adopts hydraulic bearing technology. High-performance sleeve bearing with high-performance and lasting bearing technology. It can absorb and conserve lubricating oil. Reducing wear and noise effectively. The bearing life can reach more than 40,000 hours.
• 【Simple Installation】RGB case fan is compatible with all types of chassis and easy to install. Humanized power supply interface design, two interfaces of small 3PIN on the motherboard and 4PIN for power supply D-type Port. Please do not connect 4PIN and 3PIN at the same time to avoid short circuit! Tips: FX-120 Case fan does not have ARGB function, and there is no remote control and controller. Please do not connect them to the controller.

Product features

Static Color LED SilentPro Fan

Each 120MM case fan with 6 ultra-bright RGB LED lights to create a colorful case for you Easily. Smart Choice for your Case's Cooling Solution.

FX-120 Case Fan Phantom Series

Product Size:120x120x25mm

Product Weigh:125g

Rated Voltage:12VDC

Rated Current:0.18土0.02A

Speed of the Fan :1200+10%RPM

Air Flow Range:31.68士10%CFM

Noise:18dBA

Bearing Type:Hydraulic Bearing

Screw Specifications:4.6x10mm

Threaded Blade Design

The 9 blades with special thread design bring strong wind pressure. Keep your system cool with powerful fan speeds up to 1, 200 RPM, pushing up to 31.68 CFM of air.

Shock Absorption Silent Fan

Four sound-absorbing cushions are used around the fan to effectively reduce the noise of the fan. The actual measured noise rate is below 18dBA.

High Performance Hydraulic Bearings

FX-120 fan adopts hydraulic bearing technology. It can absorb and conserve lubricating oil and improve the efficiency of the product.

Product description

Lace-up jogger with memory foam



메모리 폼이 있는 레이스업 조깅용

• Leather and Textile
• Imported
• Synthetic sole
• Shaft measures approximately low-top from arch
• Memory Foam Insole
• Flexible sole

User questions & answers

Question:	Does anyone have the extra wide fit? Is it wide in the heel as well
Answer:	Great shoe for me. I'm 6'4" and 325lbs.
Question:	I normally wear 10-m (43 europe) regular shoe, what do you recommend i order? 10-m or 10.5-m
Answer:	whenever i have my feet measured they say 10 but that's never wide enough for me,I ordered a 10wide and that fits my foot like a glove, most of the time a 10.5 is too sloppy and my foot moves around in them.some times the 10w feels small but these shoes are light weight and comfy,good memory foam,try the 10wide,I'll think you'll be happy.
Question:	Where are these madehere are these made
Answer:	Made in Vietnam, according to multiple pictures that other reviewers have posted.
Question:	Do the shoes tie - or are the 'laces' shown semi-permanent elastic for slip-on
Answer:	They tie.
Question:	New to led fans, does the 3 pin connector power both the lights in the fan and the fan or just the fan
Answer:	Both the 3-pin motherboard connector and 4-pin Molex peripheral connector (you can only plug one in) power both the LED lights and the fan.
Question:	Watts for a single fan
Answer:	Around 4 watts
Question:	Can you plug the fans into each other
Answer:	Yes, if you use the 4-pin Molex connectors you can daisy-chain the fans together.
Question:	Is it possible to daisy chain these fans by plugging one 3-pin connector into the motherboard, and use the 4-pin molex to power another fan
Answer:	You can only use one or the other connector on a single fan. If you want to daisy-chain them together, you can plug one Molex plug into one of another fan. You can do this with all the fans. However, you cannot plug both the 3-pin motherboard and 4-pin Molex plugs on the same fan.