10 best mount holders for cell phones

• 【Two Protection Ensure PRO Heavy-duty Magnetism】1st Protection: The N52 [the most powerful of neodymium magnets] Neodymium Magnets (the strongest magnetic material in industry) has been taken to forge the little compact car mount holder. 2nd Protection: the enhanced thicker metal disc ensure the super strong magnetic attrance force whilst your driving.
• 【Double Safeguard Support Reliable Position】1ST Safeguard: Enhanced Adhensive 3M LSE base can be attached to any smooth and flat surface. 2ND Safeguard: Sturdy rubber base protect efficiently the product slide off while driving. Two is better than One.
• 【No Blocking View Promots Safer Driving】Unlike the big suction cup or air vent car mount, the size of Joyroom magnetic car mount is optimized for dash installation. Our car mount installation precludes the possibility of having your view of the road obstructed by an object on the windshield.
• 【360 Hassle Free Degree Rotation】Your phone can be rotated easily to landscape and poraits as well as anywhere in between, with the low-profile magnetic car mount. This magnet car mount allow you secure your smartphone to the dashboard firmly, keeping it in place whilst the optimal viewing angle.
• 【18 Month Worry Free Warranty & Universal Fit】With our car phone mount, you'll enjoy 18-month warranty and 12 hours customer response. This cell phone car mount is fit for all phones, include iPhone 12/12 Pro/12 Pro Max/12 Mini/SE/ 11 /11 Pro /11 Pro Max /XS / XR / XS Max / X / 8 / 8 Plus / 7 / 7 Plus / SE / 6s / 6 Plus / 6 / 5s / 5, Samsung Galaxy S10 / S10+ / S10e / S9 / S9+ / S8 / S8+ /Note 10+ /Note 10 / Note 9/Note 8/ S7 / S7 Edge / S6 S6 Edge / S5 / S4, LG, Google Pixel etc.

User questions & answers

Question:	Are there scanner drivers that work with Mac Catalina
Answer:	Yes. It comes with it's own cord.
Question:	Can it use a larger than 8 gb sd card
Answer:	I have not tried it. It says it is compatible with any Bluetooth device.
Question:	does it do 8x11 pictures
Answer:	Well I have an answer, s f stands for super fine and s e is for start enjoying. Your welcome
Question:	So this unit scans an existing paper photo and converts it to digital? Not just negatives but actual photos too
Answer:	I said I could answer but when I purchased nothing worked. It has a lot of bad reviews and I should of listened. Hopefully yours will be an exception.

Product features

Resolution

Change resolution by entering the resolution menu. Press the LEFT/

RIGHT button for Resolution and press the ENTER button to confirm.

14M resolution

22M resolution

Language

Change language by entering the language menu. Press the LEFT/ RIGHT button for Language and press the ENTER button to confirm. After capture, please take out the memory card from the film scanner to download the stored images from the memory card.

Connected to computer

cable to a PC, Press the LEFT/RIGHT button for USB MSDC and press the ENTER button to confirm. The film scanner will become a mass storage device and to preview or edit images on PC.

You can also press MODE button to back to main menu.

Joyroom PRO Magnetic Car Phone Mount is one of the most stable magnetic car mount.

1.Safeguard rubber.

2.Six strongest N52 neodymium magnets.

3.Surround magnetic field.

4.Retaining screw & fixed nuts.

5.Universal adjustment ball.

6. Enhanced adhensive 3M LSE base.

Super Strong Magnetic Machnism

Updrade 6 N52 magnets (80% than N48) & 4 bigger metal discs ensure Joyroom PRO be one of the most stable car mount.

Safe Navigation Everyday

Surround magnetic field, without affecting cellphone signals. Keep your hands always on sterling wheels & enjoy safe drving.

Protect Dash Surface

Enhanced Adhensive 3M VHB base can be attached to any smooth and flat surface. 3M VHB can also be removed without any vestigital.

On the phone back cover

On the phone case

Between the case and back cover

• 【Upgraded Version】Based on the pain points of similar products "Very shaky. Sag slowly after a period and can't keep a position for your phone anymore", the arm of our gooseneck phone holder for bed adopts better materials and design. It has improvements in both stability and durability. Note: the long arm is not a super flexible type, which aims to add stability.
• 【Multipurpose Phone Holder】The gooseneck phone clamp mount is designed to: watch Netflix handsfree while lying in bed or sofa at home, use facetime with families when clipped on the desk, read recipes in the kitchen, taking selfies. And it also can be an overhead phone holder for video recording.
• 【Easy to Install】Featuring the adjustable clamp base varying from 0 to 2.36 inches (6cm), the cell phone clip holder can be securely mounted on the bed frame, bedside, headboard, nightstand, desk, end table and kitchen counter etc. A non-slip silicone base won't scratch the surface of your furniture.
• 【Stable and Durable】As for the 33.4 inches (85cm) bendable lazy long snake arm, high- quality Aluminum-magnesium alloy solid core makes the lazy arm sturdy enough to hold his phone firmly, yet flexible to bend in any direction to accommodate your view. It will be a lifesaver for protecting you from neck pain.
• 【Support 4-7'' Smartphones】The 360-degree phone lazy bracket is compatible with 4-7'' devices, namely almost all cell phones, like iPhone 12 Mini 11 Pro XS Max XS XR X 8 Plus 8 7 Plus 7 6S Plus 6S 6 SE, Galaxy S10e S10+ S10 S9+ S9 S8+ S8 S7 Edge Note 9 8, LG, Moto, Google Pixel, Moto etc.

User questions & answers

Question:	Will the clamp fit on a laptop fan
Answer:	It depends on how thick it is. Also how delicate it is. The weight of the phone plus the gooseneck clamp may be too heavy for the laptop
Question:	What’s the difference between the ls04 model and the ls05 model
Answer:	Their arms are all 85cm in length but have different designs. ①LS05's arm is a whole section, which is for adding more stability. It is more sturdy and durable. ②The arm of LS04 consists of two parts - Its upper thin arm is for adjusting angles and the bottom thick arm is for holding the whole weight. It is more flexible. Pls choose the one you prefer.
Question:	Will this reach out far enough so you can clamp this to your bedside table and lay on your back in bed and scroll on your phone
Answer:	33” - (thickness of the attached) = reach length
Question:	I could not return my phone arm on time due to being sick and corona virus it broke 2 days after I recieved it and would appreciate a return extension
Answer:	This phone holder comes with 12-month warranty. Please send your shipping address to us by [email protected]. We'd like to send you 1 pcs replacement immediately.

• Easy to Install: There are two option to use the phone clip: 1. Screw directly to the tripod with pivoting arm, being able to 360 degrees to rotate. 2. Remove the clip from pivoting arm and then mount on a tripod.
• The swivel is also easy to change the Camera,Camcorder and smartphone's orientation (360° rotation) when taking pictures.Inner padding secure your device well and protect it from damage.
• 1/4" Standard Screw: Attachable to any regular sized tripod, monopod and smartphone with standard 1/4" screw thread at the bottom.
• Compact&Portable:Helps you shoot steady video for Facebook Live, Periscope, and other microphone live streaming Vlogging platforms Its light weight design and easy portability mean that you can put it in your pocket or your briefcase and take it everywhere you go. And you will be ready for the perfect Lens picture at any time.
• Retractable&Detachable Holder: Retractable Camera,Camcorder, phone holder fits most cellphones,Cameras,Camcorders and selfie sticks(width between 56mm - 105mm )And it extremely easy to get adjusted to hold or release the phone.

User questions & answers

Question:	Will I be able to turn my phone sideways with this to record in landscape mode
Answer:	Dear buyer it can be screwed directly to the tripod with pivoting arm, being able to 360 degrees to rotate. The swivel is also easy to change the smartphone's orientation (360° rotation) when taking pictures I hope the above information is helpful.
Question:	Is this spring loaded? I don’t want to squeeze my phone into a clamp
Answer:	No. The screw pushes the plastic ends together and they hold the phone in place.
Question:	Does it come with the tripod screw
Answer:	Dear buyer, It comes with 1/4" standard screw which are attachable to any regular sized tripod, monopod and smartphone with standard 1/4" screw thread at the bottom. I hope the above information is helpful.
Question:	Can I use a regular screw to attach it to a surface? I.e. does the screw hole work for any size screw (no tripod
Answer:	Dear buyer, This item has 1/4" Standard Screw hole, so it is compatible with any regular sized tripod, monopod with 1/4" Standard screw thread I hope the above information is helpful

• Best Viewing:The base is able to rotate through 360 degrees, and the adjustable arm and ball joint makes it easy to find the ideal phone viewing angle
• Reliable Adhesion: Fixes securely to a flat surface on your dashboard. Features an additional sticker base for slightly curved or uneven surfaces
• Magnetic Attachment: Four powerful magnets securely hold your phone or GPS on your car dashboard. Just grab and go when you reach your destination. Note that wireless charging will not work when a magnetic plate is attached to your device or placed inside its case
• Easy Setup: Included circular metal plate (for smaller phones) and rectangular metal plate (for larger phones) easily slip between your phone and case or can be safely adhered to the back of your phone
• Package Contents: AUKEY HD-C49 Car Magnetic Phone Mount, Sticker Base, Circular Metal Plate, Rectangular Metal Plate, User Manual

User questions & answers

Question:	Can you put the magnet in the case or adhere it to the case if you have credit cards in the case? As in using one of those phone case wallets
Answer:	It is recommended to adhere it to the case.
Question:	Can I attach the magnet to back of my phone case
Answer:	Attach directly to back of phone. The magnet will hold.
Question:	I found two metal plates for my phone in the package. One is round and smaller while another is rectangular and bigger. What's the difference of them
Answer:	If your phone is larger than 6 inches, you may want to use the rectangular one since it will provide more magnetic power..
Question:	It is possible to reposition the sticky base many times
Answer:	Not too many times. Yes you can remove it, wash it, and place it somewhere else but it is not as sticky. I don't recommend repositioning as mine lost the thick sticky piece due to moving and now the product is useless.

Product features

Stable & Flexible Mounting

Adhesive base with suction lock fixes securely to your dashboard. Release the lock to rotate the mount 360 degrees on the base.

Adjustable Arm

90-degree-adjustable arm keeps your phone accessible without blocking your view.

Comfortable Viewing

360-degree ball joint motion makes it easy to find the ideal phone viewing angle.

Installation

Stick the magnetic plate to the back of your phone (or place it inside your case under the phone) and attach your phone to the arm of the mount.

Noted: Wireless charging will not work when a magnetic plate is attached to your device or placed inside its case.

Step 1

Peel off the white backing on the bottom of the adhesive base and stick it to your dashboard.

Step 2

Lift up the lever on the phone mount and place it on top of the adhesive base.

Step 3

Press down the lever. The mount should now firmly grip the adhesive base.

• STABLE "HOOK SHAPE" CLAMP：This car phone holder mount is designed as an innovative hook clamp, which is locked on the air outlet blade by a knob. The strength of the knob is adjustable, so it solves the common problem of mounts being easy to fall off over time and does not produce any noise when the car is running.
• 360 DEGREE ROTATABLE STAND：The 360 degree rotatable stand makes it easy to find the most suitable position. It solves the problem of blocking the air outlet and keeps your sight level higher and safer.
• LOCK YOUR PHONE FIRMLY: This is a magnetic phone car mount with 6 built-in strong magnets, and it bears up to 7lb of weight. The powerful suction keep your cellphone stay stably even when drive on a bumpy road.
• EASY INSTALLATION: This magnetic phone car mount benefits from the special design of the clamp, this vent phone holder is quite easy to install, just need to put it on the car’s outlet blades and adjust the length of clamp by turning the knob to match the outlet.
• WHAT IS INCLUDED: 1*Kaistyle magnetic phone car mount, 1*Round metal Pad, 1*Rectangular metal Pad, 1*Round PE Film , 1*Rectangular PE Film. TIPS：It is recommended to paste the metal Pad inside your phone case (not recommended for the plush material case).

• Secure Stable Install: The VICSEED phone car holder with the latest improved vent clip [ Won't break & Drop off ]. The car phone mount attaches easily and securely to most of air vent. After take few seconds to install it well, if you hit a bump or a sharper turn the phone holder will stay in a place. It ensures a safe, distraction-free car environment
• Perfect Protection: Say goodbye to the easy-scratched plastic panel phone mount. VICSEED cell phone holder for car adds a upgrade high-density silicone material with excellent resilience. The car mount for phone is covered in a thick layer of silicone that will ensure your mobile device is safe from wear and tear. The unprecedented design makes leaves zero scratches on mobile devices
• Easy to Adjust & Multiple Viewing Angle: This cell phone car mount has a highly flexible ball-joint 360° rotation that provides infinite viewing angles. The samsung galaxy note 2 car mount allows quick switching between vertically and landscape view .Position your phone at the perfect angle to enjoy a more relaxed and safer drive
• Secure Grip & One-button release: This cell phone car mount vent owns the thick arms built-in anti-slip rubber pads, which makes the car mount for iphone 6 can secure grip your mobile phone. No need worry your phone will fall off from the car mount for iphone 7. It ensures a safe, distraction-free car environment. The samsung galaxy s7 car mount also features a One-button release system that enables you only take 0.1S to lock or release your phone with one hand operation
• Friendly Design: VICSEED upgrade iphone car holder owns adjustable foot, the function not ony has avoid some cell phone power or volume button will be squeezed by the clamp arm but also make the iphone holder can fit well for big phones.Fit well for all mobile phones between 4''-7''in width and most thick case

User questions & answers

Question:	can hold on Samsung note
Answer:	Yes, the car phone holder can hold on Samsung galaxy note7 Welcome to buy VICSEED
Question:	Will this work for Samsung A
Answer:	Yes, this Phone car holder can work for your mobile phone welcome to buy Best Regards VICSEED Direct
Question:	can you charge your phone while using the mount
Answer:	yes you can. The iphone car holder with a slot at the bottom where you can run a cord to your phone and plug it into your charger.
Question:	Will this fit for my iPhone Xs
Answer:	Yes, the car phone holder mount can fit iPhone XS.

Product features

VICSEED 2020 Upgrade Air Vent Clip Non-scratch Silicone car cell phone holder

Easily secure the Car Mount to your air vent with the upgraded clip, providing strong stability that wouldn't rock back-and-forth.

The phone car mount covered in a thick layer of silicone that will protect your expensive phone from scratch.

Why Choose VICSEED Car Vent Phone Mount?

• Say goodbye to bulky phone holder for car windscreen which just aren't>
• No more being distracted by your phone sliding off your dashboard.
• No more oversized car mount blocking your windshield.
• No more car suction phone holder which don't work when it's too hot or cold.

Easily to Use VICSEED Car Cell Phone Mount Clip

1:Unscrew the clip by rotaing.

2:Install the iphone holder for car into your car air vent, then close the clip by rotaing to make it fix to the air vent.

VICSEED iPhone Car Mount Main Features

• Works with all smartphones 4~7 inch mobile phones, including Apple iPhone, Samsung Galaxy, HTC, LG, Google, Motorola, Xiaomi, etc
• Easy to install and use, the android car mount can install in a few seconds
• Enough deep arms can support THICK Phone case (Thickness of the phone case’s back should be less than 0.5in.)
• Adjustable bottom for larger phones
• Release button can let you put and get phone easily
• Multi-angle & adjustable, 360 degree ball-joint rotation

Support charging while driving

There is reserve charging port, so you can charge your phone easily. Always keep your phone full of battery power. It also won't block the aux jack. You can connect your phone with your car sound equipment freely.

Work well all year round

Constructed of durable, sturdy airliner PTFE material and rubber, this will hold your device securely in place even in extremely harsh environments.

Support big phones

The bottom tray is adjustable. If your phone is large size, you can pull the foot down. So our air vent car mount universal phone can hold your big phone better fit.

Compatible Devices

• iPhone 12 / 12 Pro / 12 Pro Max / 12 Mini / 11 / 11 Pro / 11 Pro Max / XS / XR / XS Max / X / 8 / 8 Plus / 7 / 7 Plus / SE / 6s / 6 Plus / 6 / SE / 5s / 5 / 4s / 4
• Samsung Galaxy S20 / S20+ / S20 Ultra 5G / Note10 / Note10+ / S10 / S10+ / S10E / S9 / S9+ / S8 / S8+ / Note 8 / S7 / S7 Edge / S6 / S6 Edge / S5 / S4 /A70s / A20s / M30s / M10s / A90 5G / A30s / A50s
• LG V50S ThinQ 5G / G8X ThinQ / Q70 / K30(2019) / K20(2019) / K40S / K50S / W30 Pro / W30 / W10 / Stylo 5 / V50 ThinQ 5G / G8S ThinQ / G8 ThinQ / Q60 / K50 / K40 / Q9 / V40 ThinQ
• Google Pixel 4 XL / 4 / 3a XL / 3a / 3 XL / 3 / 2 / 2 XL / XL / Pixel
• Oneplus 7 Pro/ 6T/ 6/ 5T/ 5/ X, Moto G7/ Z3, Nokia 7.1/ 6.1, etc
• Blackberry Q10 / Z10; Sony; Nokia; XiaoM; Huawei and all phones.
• What's in Box
• 2xCar Air Vent Clip
• 1x Car Phone Holder
• 1xUser Guide

• One holder for multiple purposes. More convenient, can be used in car dashboard, sun visor, rearview mirror.
• 360 Degree rotation ,Switch between horizontal and vertical screens at your will.
• Curved base design,Made with a soft,non-slip silicon pad and curved base. The phone holder can be attached to the cat dashboard or curved surface. and firmly hold your electric device order to prevent them from scratching and dropping.
• Spring buckle base can not be shaken off. Strong and sturdy.
• Broad Compatibility: designed with a spring buckle , which can be adjusted to fit mobile phones from 4 to 7 inches.

User questions & answers

Question:	Where is this product made
Answer:	I didn't check to see where it was made, buf that doesn't matter to me. I do like quality purchases though. This is a very strong and sturdy holder.
Question:	Will it fit the dash of a 2015 acura mdx
Answer:	Looking at your dashboard setup, it looks like it may be able to clip in the middle of your dashboard, but may block part of your view when you're driving. It may also clip behind your steering wheel.
Question:	Will it fit an iPhone SE 2020 with no case on it
Answer:	Yes it will. The height of the phone won’t matter. My iPhone 8 with case is 3inches. Your SE 2020 without case is 2.65inches. And there is room to spare.
Question:	Does this work after it’s exposed to the sun
Answer:	Mine does, even on the hottest of Southern California days it works just fine.

• Ultra Sticky Suction Pad:Firm suction pad sticks tightly on the dashboard or most surfaces. Remove easily by pulling the suction pad without leaving any nasty mark on your dash.(NOTE:We DO NOT recommend to apply the dashboard car mount on leather, wall or filmed glass surfaces as the suction cup is designed with strong viscosity and attraction)
• Extendable Arm:Telescopic arm can extend from 4.6in to 6.6in and pivot up or down for optimal viewing height. Prevent from blocking your view while driving.
• 360°Rotations:Swivel ball head ensures 360° free rotations to your desired viewing angle. Quick to adjust for a safe and effortless drive. As summer approaches and days are getting hotter, please avoid direct exposure to the sun as this may affect the function of your car mount
• Flexible Arm Lock: Simply press the button to adjust arm width that ranges from 1.6-3.5in (4-8.8cm). Our car mount holder is compatible with most smart phones up to 6 inches.
• All-Around Protection:There are sponge cushions on the car phone mount for secure and wobble-free fit for your cell phone. Foldable holding feet allow hassle-free charging for your cellphone. Note: Please avoid the car mount if you use a pop grip. It cannot hold phones with your Pop Mount/Pop out stand/expanding stands.

Product features

Broad Compatibility

Works with most smartphones and cases. The arms present a firm grip to hold the latest iPhone series, Galaxy series, phones from Motorola, Sony, and any other mobile phone brands with width in a range of 1.8in/4.5cm and 3.7in/9.3cm.

Sticky Suction Cup

The suction cup has a coating of sticky gel that prevents air gaps and ensures a secure hold on the dashboard, windshield, or desktop. Note: Works on smooth and flat surfaces. Do not attach it to the windshield in hot summer.

Anti-fall Adjusting Knob

You can easily adjust the length of the arm by turning the knob, and customize the distance between your phone and you as needed. The knob has been upgraded and uses an anti-fall design, it will not fall off during the adjustment process.

Anti-skid and Anti-scratch

There are sponge pads on the arms, bottom feet and surface, which can protect your device from being scratched. Also. The cushioned car mount absorbs the vibration during bumps, and holds the phone securely in place.

Rinse and Reuse

If the sticky suction cup gets dirty or loses its stickiness, simply rinse it with water and let it air dry, it will stick like new. You can easily remove the car phone mount holder from vehicle to vehicle and re-attach it as you want.

Warm Prompt

The total thickness of the combination of phone and phone case should not exceed 13mm/0.5in. To ensure a firm grip, please remove the ultra-thick phone case, pop grip, and phone ring holder when using this car phone holder.

• COMPLEMENTARY WIXGEAR DESIGNS: The complementary design of the magnetic mount is one that fits into the back of any smartphone. The magnetic mount is has a smooth surface that is perfectly suitable for mounting and holding any smartphone in place. magnetic car mount holder
• POWERFUL MAGNETIC MOUNTS: The reinforced magnetic holder of this mount is what sets it apart from other mounts. This Universal magnetic holder produces an intensive force of attraction that will hold any smartphone. Including Android, Apple, Blackberry and Microsoft devices.
• SWIVELS YOUR DISPLAY: Rotate your smartphone and swivel your display as you please. The base of the mount remains stick on you dashboard of your car and does not move, no matter how much swiveling or rotation you do. This guarantees that your smartphone will always remain in your preferred position.
• WIXGEAR STURDY BASE: The high quality rubber construction of the base of the mount is unique and very functional as well. It guarantees that the base of the mount will solidly hold the magnetic head of the mount, to help keep your smartphone in place, regardless of road vibrations or impacts
• WILL NOT BLOCK THE AIR VENTS: and the windshield of the car. Its 5 times easier to use than any other mounts just stick it on your car and you are good to go.

• Widely Compatibility : The dashboard cell phone holder is suitable for most kinds of cell phones or GPS devices which are between 6-12mm thick. Including iPhone 11/11 Pro/11 Pro Max/ XR/ XS/ XS Max/ X/8/8 Plus/7/7 Plus/ 6s /6s plus/6/6 plus/5Se/5s/5/4s, Samsung Galaxy Note 8 /9/10 /10 pro/20 ultra, S20/S 8 /9 /10, S 20 plus/ 8 plus / 9 plus /10 plus, S 7 Edge, Nexus, Pixel, LG, Sony, HTC, IPAD, Huawei, Mi, Garmin and so on
• Stable & Slip free : Dependents on its soft silicone-textured bottom and sticky pads, it can protect phone against bumping, scratching or flying out whenever there is an emergency braking, sudden stop and sharp turn
• Washable & Reusable : The bottom of the car phone holder is made from high-tech adhesives. Just rinse with water and dry it, it will be the same as the new one
• Use Tips : Peel off the sticky film on the bottom of the car phone holder and ensure your car dashboard surface being dry and clean (no dust) before laying the holder on

User questions & answers

Question:	Does heat effect the secure hold & does it leave any residue when removed
Answer:	Just got it few days ago but were out all day yesterday in heat of sun and it stayed secure. I had wondered about residue too and just went out and checked and it it does not! I am sold now! I put it in center of dash which I like better then off to side or the ones that fit in your cup holder so you would be looking down.
Question:	Could someone please provide the dimensions of the base pad area? (Length and width
Answer:	The length is 5.1 in,and the width is 5 in.The holder can support the phone firmly.
Question:	Can it be used with the phone vertical
Answer:	I am afraid that it can not be used with the phone vertical. It can be used with the phone horizontal conveniently.
Question:	Will this fit a phone in an otterbox
Answer:	It fit my phone in an Otterbox. It stands up straighter with the Otterbox case on, but it stays put.

Product features

Loncaster Cell Phone Holder for Car, To make your drive easier

Note

Compatible devices：

1. The dashboard car phone holder is suitable for all cell phone devices with 6mm-12mm thickness. Including compatible for: iPhone 11/11 Pro/11 Pro Max/ XR/ XS/ XS Max/ X/8/8 Plus, Samsung Galaxy Note 8 /9/10 /Note 20 Ultra , S20/S9 /S10, S20 Plus / Nexus, Pixel, LG, Sony, HTC, IPAD, Huawei, Mi and other more devices.

2. It needs a smooth flat area(5 x 5.1 inches) on your dashboard for installation. Besides, it won't work well if your devices covered a thick case, especially the otterbox, life-proof and pop socket.

3.Applies to the most majority of dashboards, except some curved surfaces like 2016 Subaru Impreza, 2016 Nissan Frontier, mini cooper, 2016 Audi Q7, Honda Civic, 2009 Honda Accord, 2010 Honda CRV, 2008 Toyota Yaris, Toyota Rav 4 2018, Toyota Corolla, BMW i3, 2013 Audi A7, Scion XD, 2011 Tacoma, 2006 Jeep Wrangler, Jeep Cherokee, 2016 Nissan Sentra, 2018 golf GTI, 2019 Prius, Ford Fiesta 2016, Hyundai Genesis Coupe, Mercedes Benz CLA 250, 06 Acura MDX, etc.

One-hand Operation

Easy to mount, release and operate the phone with one hand. No distraction while driving.

No Harm To Your Device

Designed without magnets, full silicone material avoid your phone be scratched. A gel pad is easy to clean. no leave residue on the dashboard.

Stable & Non-Slip

Premium Silicone-Made, Non-Slip Technology holds your phone tightly to keep driver and cell phone safe.

Multi-purpose Phone Stand

Frequently Asked Questions :

Q: Will it fit with a pop socket attached to the back of the iPhone?

A : No. There is a solid panel behind the phone when it is placed in the holder.

Q : Can I use it with a fuzzy dash cover? Is the back part weighted at all?

A : No, the back is not weighted and it would not work with a fuzzy dash cover.

Q:Can this be placed on a curved or carpeted dashboard navigation mat?

A : No, this appliance has a peel layer and under is adhesive on bottom of unit.

Q: Can I take it back and forth from the car to the house?

A: Yes, it doesn't permanently stick to anythin. You can take the holder with washable rubber back and forth from the car to the house. It can be used repeatedly.

Q :Will it be better than a magntic holder or suction holder to the window or dashboard？

A: Yes, absolutely better than magnetic. It won't budge and hold the phone in a horizontal position securely.