13 best venom scissor lift jacks

• REINFORCED LIFT CAPACITY：With a hefty lift capacity of 1200 lb and dynamic lift height range from 3 3/4" to 13 2/5", it can be used to lift street bikes, cruiser bikes, and adventure touring motorcycles. It will not fit snowmobiles, ATVs, UTVs, or dirt bikes.
• DURABLE CONSTRUCTION: Heavy-duty steel body and steel sleeve with easy-adjusting lift height. The durable red coating is highly resistant to oil, grease, and dirt.
• XL DECK: The extra-wide top platform of 9.8” x 15.8” provides a large contact area for better balance and support to your motorcycles, so you can find the bike’s center of gravity without the hassle.
• NON-SLIP DECK & GLOVES: The lift deck is padded with premium rubber for extra durability and stability. Protective gloves are included for your safety. Manufactured and tested to meet all current safety standards.
• NOTE: Avoid using an impact wrench - improper use may cause damage to the nut. Lift your motorcycle easily by rotating the metal sleeve, please refer to the instructions.

User questions & answers

Question:	Can it be used for scooters , mopeds
Answer:	When the battery expires (after 7 years), you can send it in to ACR to have it replaced for $150. Or if you like taking risks with your life, you can replace it yourself for $5(it runs on 3 CR123A cells, welded and heat shrinked into a single battery pack).
Question:	Has anyone with a Milwaukee 8 used this successfully
Answer:	It works wold wide in any location as it communicates with the satellite. However once it's activated it will be transmitting signal for 24 hours. If you are in a distant location that search and rescue needs more than 24 hours to find you then we recommend getting any of our EPIRBs, GlobalFix V4, Pro, or iPro. They last from 48 to 65 hours.
Question:	Will it work with a ninja 650? And where am I supposed to position it
Answer:	The unit will keep blinking while the signal is been transmitted. There is no return confirmation only sending out. However, you are able to test the unit before going out on a trip by performing a self-test.
Question:	Honda vtx 1300 r weighs 726 lbs. big crusier motorcycle. nobody has used it like this heavy and type of motorcycle. just need to know will it work
Answer:	I'd say fairly difficult. That yellow flap on the front protects the activation mechanism and the spring is fairly robust.

Product features

Orion Motor Tech Motorcycle Scissor Jack Stand

Product description

NEW Adjustable Motorcycle Pivot Center Lift Stand. Lifts and stabilises front or back end of hard and soft tail cruiser style bikes quickly and safely. The stand is positioned under the bike, and the long high-leverage handle is rotated toward the ground; securely lifting and supporting the bike. Design of stand ensures rim and tire protection and once bike is supported, allows easy removal of front wheel.

Features:

• Adjustable Motorcycle Pivot Center Lift Stand
• Lifts and Stabilises Front or Back of Hard and Soft Tail Cruiser Style Bikes Quickly and Safely
• Use on any Bike with a Flat, Exposed Lower Frame Area 20" Wide or Less
• Removable Handle can be used on Left or Right Side of Bike

Specifications:

• Adjustable Lift Bar: 7"-10" (Ground Clearance)
• Dimensions: 20" Width x 10" Height
• Color: Black
• Material: Steel
• Condition: 100% Brand New

Installation:

• Your Motorcycle with an exposed lower frame area of 20" or less

Package Includes:

• 1x Adjustable Motorcycle Pivot Center Lift Stand
• Instructions not included

Fitment: Harley Davidson Softail Heritage Classic

• Adjustable Motorcycle Pivot Center Lift Stand
• Material: Steel
• Use on any Bike with a Flat, Exposed Lower Frame Area 20" Wide or Less
• Brand: Venom | Lifts and Stabilises Front or Back of Hard and Soft Tail Cruiser Style Bikes Quickly and Safely
• Compatible with Harley Davidson Softail Heritage Classic

User questions & answers

Question:	What is the weight rating for this lift
Answer:	Hi friend, Yes, it will come with storage/charging case, that can protect and recharge your headphones while not in use. Hope this will help you a lot. If any other problem, pls contact via [email protected], we are glad to serve at you. Best regards, Vislla Team
Question:	Anyone use this on a dyna
Answer:	Yes. They slip into a sleeve on the chair legs. You can put into the sleeve and there's a button you can depress to put in place or remove at anytime. They do sell armless chairs if that's what you are looking for. Having this extra stability is nice though while the person lowers to sit or to get up from sitting.
Question:	Anyone using this on a heritage soft-tail with saddlebags installed? any issues? do the bags need to be removed when using
Answer:	No. I have a lightly textured tub and it did not adhere. Had to return it.

Product description

Pro lift T-6906D is a 6-ton double locking jack stands. It features a high quality cast ductile Iron Ratchet bar and sturdy stamped steel base provide durability and longevity which makes ideal for home, professional and farm use. Always used in pairs, counter weighted pawls serve as a safe secure locking device to prevent the load from accidental disengagement. An attached pin lock provides support, locking the ratchet bar in place for an additional carrying point. One piece, multi position ductile ratchet bar provides strength and durability as well as a quick adjustment mechanism that securely locks into the desired position.

• Sturdy stamped Steel Construction with 6 ton capacity
• High quality cast ductile iron ratchet bar
• Double locks mechanism with both handle locks and mobility pin
• Height adjustment mechanism allows smooth upward movement while release handle locks and mobility pin
• Meets or exceeds ANSI/PALD standards. Ideal for home, Auto, truck service, farm, and shop use
• Comes with 2 Adjustable Beam and a Single stand;It has both commercial and residential applications

User questions & answers

Question:	Is the pin attached to the back so it doesn't get lost
Answer:	I took some measurements for you. Base weight 8.6 pounds Tongue weight 4.8 pounds Weight per stand 13.4 pounds each Total weight per set of 2 jack stands 26.8 pounds Tongue head contact size 1 inch x 3-31/32 inches Number of notches in tongue 11 Distance between notches in tongue: 3/4 inch steps Base stand dimensions 9 inches x 10-3/8 inches All height measurements are from floor to lowest U shaped contact point in tongue head (true resting point) Minimum lift height tongue base resting on floor: 14-3/16 inches Minimum height to first notch (non locking): 15-7/16 inches Minimum height to first locking notch: 16-1/8 inches Maximum lift height (locking) 22-7/8 inches. Note the lift is a little higher if you add the top of the saddle points, that is if the object is not resting in the U shaped saddle but at the top of the crown-ridges Weld quality-good/acceptable box and packing o.k. capacity as stated in literature: 6 tons per pair Country of manufacture: China Based on the above, I bought a second set, as I liked the first set.
Question:	Are these 6 tons each or 2 three ton stands that equal 6 tons
Answer:	Lifting range is 6-3/8" to 22".
Question:	How high they can extend and hold
Answer:	china
Question:	Please add some more info to your listing. What's the minimum and maximum clearance? What are the dimensions on the heads? Base
Answer:	These jacks will hold 3 tons or 6,000 pounds. Since you won’t be holding the entire weight of your vehicle you should be fine. These are great light weight jacks for tire changes and auto maintenance too.

Product features

Pro-LifT Double Pin Jack

Pin style jack stands offer the ultimate in security and safety. All Black-hawk Automotive pin style stands are offer some of the best values on the market today.

• Sturdy stamped steel construction
• Height adjustment mechanism allows smooth upward movement while release handle locks into position
• Ideal for auto, truck service, farm, and shop use

Product description

Fit Under Low Ground Clearance Vehicle

Pro-Lift F-767 Grey Low Profile Floor Jack is a 2 Ton floor jack that give you better access to low ground clearance vehicle. And,give you the lifting range from 3-1/2 inches to 14 inches.

The Jack can be fit under a clearance of 3-1/2 inches and maneuvered easily into position.

Pro Lift F-767 floor jack also features the heavy duty steel construction that provides the long lasting durability.

Pro Lift unique patented bypass device protects against over pumping. Its built-in safety valve provides overload protection.

- Extra Low Profile

- Lifting Range from 3-1/2 inches to 14 inches

- Patented bypass device protect over pumping

- Built-In Safty Valve Provides overload protection

Pro Lift F-767 floor jack is backed with SFA 90 Days Warranty from the Date of Purchase.

Take one now to access to the areas you never access before.

• Extra low profile
• Lifting range of 3-1/2 inches to 14 inches
• Patented bypass device protects against over pumping for safe operations
• Built-in safety valve provides overload protection. Rust Resistant
• Heavy duty steel construction provides long term durability

User questions & answers

Question:	Does it come with a portable case
Answer:	No, but the box it comes in is pretty sturdy. If you remove the cardboard packing the jack easily slides back into the box. The inside bottom of the box is reinforced. Not sure how long it will hold up, but it’s better than nothing.
Question:	Will this raise a 2011 cadillac cts enough to get jack stands underneath it? i want to change transmission oil ... thanks
Answer:	A Cadillac CTS is roughly 4,300 pounds. Which is a little over the capacity of this jack. As long as you're placing it on jack stands and you don't leave the jack holding it too long, it should be okay. Although all the armchair experts on this site will implore you to buy a 3 or 4 ton jack. Just remember to always put the car on jack stands and do your work on a flat, level surface.
Question:	Can anyone tell me the outside diameter of the lifting cup? Thanks
Answer:	The cup itself is 2 1/4 inches, with the inner portion (The part that spins freely, with the 4 tabs) 1 7/8ths, and the tabs extend about 1/4 inch up from the cup. Hope this helps.
Question:	What kind of oil does this take? The screw was loose when it was shipped to me and some oil had poured out into the box. I just want to top it off
Answer:	hydraulic jack oil. The screw IS loose upon arrival. If you read the SHORT instructions....this (grey) screw is HOW TO LOWER the jack when you are done lifting and have supported the weight/vehicle with jack stands. Turning just a bit using the handle you used to pump up the vehicle - you will notice it lower ever so gently. ONCE it is fully lowered - it is best to immediately turn the screw clockwise until it stops - this prepares the jack for its next use. Do this so you will not forget it is closed. IMO - some people with oil spewing - did not 'get it' how important it is to assure the valve is closed BEFORE raising the vehicle.

Product features

Pro-Lift F-767 Grey Low Profile Floor Jack - 2 Ton Capacity

About Us:

Our ProLift hydraulic automotive jacks, lifts and garage equipment range will cater to many 'do it yourself' enthusiast. The product line includes bottle jacks, floor jacks, garage jacks, aluminum jacks. scissor jack, lawn mower lifts, utility lifts, chokes, dirt bike lift, creepers, mechanic seats and more! Explore our range on the products page.

ProLift has become a global presence in the go to automotive garage maintenance equipment with locations in the United States, The Netherlands, Taiwan and Australia. We create dependable and reliable performance hydraulic equipment.

Product description

The Torin BIG RED T10152 steel scissor lift jack car kit is a collapsible, compact jack can be used as a rugged replacement jack or as an extra utility jack that can be stored in the trunk of your car. Engineered using a drop forged alloyed steel construction for quality and durability and features a lifting range of 4-1/8" to 15-1/8" with a 1.5 ton (3,000 lb) capacity. It's equipped with an extra-wide base which adds stability and strength. The 1 piece handle delivers on-the-spot quick response and speed to get the job done quickly and safely. This unit is 100% factory tested for reliability and safety to meet and comply with ANSI/ASME PASE safety standards. Includes a limited 1 year manufacturer warranty.

• Collapsible, steel scissor lift jack has a compact design that can be used as a rugged replacement jack or as an extra utility jack that can be stored in the trunk of your car
• Features a lifting range of 4-1/8" to 15-1/8" with a 1.5 ton (3,000 lb) capacity
• Engineered using a drop forged alloyed steel construction for quality and durability
• Equipped with an extra-wide base which adds stability and strength; 1 piece handle delivers on-the-spot quick response and speed
• Meets ANSI/ASME PASE safety standards and includes a limited 1 year manufacturer warranty

User questions & answers

Question:	Can you tell me the width of the base on this jack? Thanks. RMW
Answer:	The base is 6&1/2" wide, is 4&1/2" deep at the ends, but narrower at the middle. Realize that made-in-China items can quickly change depending on their latest vendor, i.e., low-bidder. I'm happy with mine, although the picture for mine showed it had a flat top, and mine has two small bumps that protrude--although only a very little bit. These might provide stability in some situations, don't pose a problem in most, but I'd have peferred that the top be flat.
Question:	what is the fully collapsed height -- will it fit within a gap of 3-3/4 inches
Answer:	Yes. It will clear that distance. Its collapsed height is 3 1/2 inches.
Question:	Can you tell me about the length of the jack when it closed , I want to see if it match it's place in my car ( Toyota Camry
Answer:	When completely closed, as flat as can be, this item measures 5" high, 5" wide and 18" long.
Question:	Will this jack for toyota corolla le 2009 model
Answer:	I'm sure it will work for the 2009 Toyota Corolla. The limit on the Jack is 3,000 pounds. This jack should easily lift the weight from one side or one corner. Be sure the jack is firmly under a frame member. I would recommend a Jack stand or blocks to place under the frame in the event of a mishap.

Product features

Torin BIG RED Steel Scissor Lift Jack Car Kit, 1.5 Ton (3,000 lb) Capacity

Product description

Fast Lift to the Jacking Point

Blackhawk B6350 Service Jack is a 3-1/2 ton (7,000 lbs) capacity service jack that features the unique design of fast list technology to fast lift to the jacking point with no load.

It features the swivel saddle that provides you with the easy jack positioning and user safety. Its heavy duty steel construction also provides you the safe use and long term durability.

Blackhawk B6350 Service Jack also features the bypass device that preventing the damage from over pumping.

Blackhawk B6350 Service Jack also features the built-in internal safety valve and vent plug to ensures the safe operation.

- 3½Ton (7,000 Lbs.) Lift Capacity

- Fast Lifting Technology

- Heavy Duty Steel Construction & Swivel Saddle

- Built-In Safty Valve and Bypass Device

Blackhawk B6350 Service Jack is backed by the full one year warranty from the date of the purchase.

Click the buy button now to get your long lasting professional sevice jack

• Built-in internal safety valve and vent plug ensures safe operation
• Swivel saddle provides easy jack positioning and user safety.Saddle Diameter: 4 inch
• 3.5-ton/7,000 lb. lift capacity
• Jack Size: 28 1/2" L x 13 3/4" W x 6 1/2" H
• Rugged universal joint for precise load control
• Great for working in the garage and other outdoor activities such as picnics or ball games
• Note: The hydraulic jack is designed to lift, not to support the object. Immediately after lifting, loads must be supported by a pair of appropriately rated jack stands

User questions & answers

Question:	Hi, Wondering if it will fit my new XtremepowerUS 1/2 Ton Transmission Hydraulic Floor Jack Adapter it has a 1 1/4 inch hole
Answer:	I would say no. The hole in this jack only measures 1 1/8". It would seem your adapter needs an 1 1/4" hole for the "peg" to drop into .
Question:	How high does it lift
Answer:	The lifting range on the jack is 5.5" to 22" H.
Question:	Will this fit under a low profile car like a 350Z
Answer:	It's unlikely. I have a 2006 Mustang GT. If I'm not mistaken, a Mustang has about the same ground clearance as a 350Z. The jack will not fit under my Mustang. It's about an inch or two too tall. It is a great jack in spite of this. I use it on my other vehicle.
Question:	Anyone know of any jack that has this weight capacity, but is made in the USA
Answer:	My Blackhawk B6350 I bought 3 months ago has a made in the USA sticker. For whatever that means. Maybe to sticker was made here!

Product features

Lifting Range: 5.5 inches - 22 inches

• Note: Before it uses, it needs to make sure the release valve needs to be turned clockwise until the firm resistance is felt.
• Note: Since the hydraulic jack is designed to lift, not to support the object. Immediately after lifting, loads must be supported by a pair of appropriately rated jack stands

Product description

Warning: These stabilizer jacks are for RV stabilizing and leveling purpose only. NEVER use for lifting, changing tires or supporting weight of any vehicles. Improper use can result in property damage, serious injury or death and will void the warranty!

• Stablizing and leveling your RV/Trailer, Remains steady on soft surfaces because of wide bow-tie base
• Includes 4 steel jacks and 1 crank handle, Also include a 3/4" hex magnetic socket to raise/lower jack faster by power drill!
• Aslo include 16 pcs 3/8" mounting screws & matching 9/16" socket, a 11/36" mounting hole drill bit, one set of drilling guide sticker, everything you need for install!
• Extended height: 24", Retracted height: 4", retracted length: 26-1/2", width: 7.5"
• Capacity: 5,000 lbs per jack, bulit by same material as other brand's "up to 7500lbs"

User questions & answers

Question:	the 40lb item weight, is that for all
Answer:	Yes, I purchased them and they actually weighted about 11lbs each jack...
Question:	How far apart are two top bolts/scissor-arm-axles, center to center? Want to use existing welded plates on frame
Answer:	Hello, If you talking about the bolts in the mounting plate. They are 2 inches apart. Front to back. That is center of bolts. Hope that helps.
Question:	Do these have to be mounted in order to use as stabilizer
Answer:	Yes, have to be mounted either by bolts or by welding, it’s for the safety
Question:	What is the retracted length, is it 12" or 26 ½? Please reply soon
Answer:	I can only verify information on items sold by classacustoms Extend Height: 24" Collapsed Height: roughly 4" Collapsed Length: roughly 27" (this includes screw) If the distance between the ground and your trailer frame is less than 20 inches you should use 24 inch jacks (not 30 inch jacks) Do Not use the scissors jack to lift excessive weight or tires off the ground. Jack is made to stabilize your unit, not lift unit off the ground. Vehicle frame and door jam damage may result. Do Not use these scissors jack as a tire changing jack.

Product description

Great Addition to any Garage and Home

Pro-Lift B-004D Grey Hydraulic Bottle Jack is a 4-ton bottle jack that is ideal for auto, truck service, farm and shop use. With the heat treated critical stress areas, it ensures long life performance. In addition, the carrying handle makes it so easy to carry around wherever need it.

It features the steel lifting saddle that is engineered to hold load securely.

With the extension screw, it allows Pro Lift B-004D Bottle Jack to be adjusted to accommodate desired work height.

Pro Lift B-004D Bottle Jack also features Built-In bypass system to protect against ram over-travel.

- Steel Lifting Saddle Engineered to Hold Load Securely 

- Extension Screw Adjusts to Accommodate Desired Work Height 

- Built-In Bypass System to Protect against Ram Over-Travel 

- Heat Treated Critical Stress Areas 

- Designed to Meet the Latest ANSI/PALD Standards

Specifications

- Capacity: 4 Ton 

- Lifting Range: 8 x 15-3/8 inch 

- Carrying Handle: No 

- Item Weight: 9 Lbs

Pro Lift B-004D Bottle Jack is backed with SFA 90 Days Warranty from the Date of Purchase.

Grab one now to add to your home tool set

• The product is 4Ton bottle jack
• Easy and simple use kit
• The product is manufactured in china
• Steel lifting saddle engineered to hold load securely
• Extension screw adjusts to accommodate desired work height
• Built-in bypass system protects against ram over travel
• Heat treated critical stress areas ensure long life performance
• Designed to meet ANSI/PALD standards

User questions & answers

Question:	What is the diameter of the jack pad on the top of the pad
Answer:	Without going to the garage, I would guess 1 1/4"
Question:	How tall is it closed
Answer:	In the product description it states this - Lifting Range: 8 x 15-3/8 inch So I would think that it is 8" closed and lift up to 15-3/8 inches Plush the top screws up & down some?
Question:	is there anything we can fix the bottom to make sure it doesnt fall to side
Answer:	It shouldn't fall. But if your still concerned you could drill holes on the base and mount it to a piece of wood.
Question:	Do i need to buy the oil seperate
Answer:	no

Product features

Pro-Lift Grey Hydraulic Bottle Jack

Our lifting equipment products have consistently led the industry in quality and innovation. Designed after professional grade equipment standards, Pro-Lift equipment passes current standards and is kept under close quality control from factory to your home. Our products provide a unique twist to your garage maintenance needs.

• Steel lifting saddle cleared for load gripping power
• Extension screw adjusts to accommodate work height
• Heat treated critical stress areas ensure long life performance

Product description

The Arcan ALJS3 3-Ton Steel Jack Stands has an overall 3-Ton lifting capacity and a working range of 11-5/8 in. to 17.5 in. A counterweighted pawl locks in place securely to prevent slipping, while allowing easy adjustments. A large contoured saddle with locating lugs helps support and position vehicle frame. The wide stance base delivers superior stability and includes base pads that prevents the jack from sinking into asphalt and provide stable footing for the jack stands. The welded construction and alloyed steel offer years of support. Arcan puts all of our lifting equipment through voluntary and rigorous third party safety testing, as outlined by the ASME PASE-2014 Safety Standard for Portable Automotive Service Equipment, to ensure that our products are among the safest on the market.

• COLORS MAY VARY: ALJ3T (silver) or A20018 (green)
• LIGHTWEIGHT AIRCRAFT-GRADE ALUMINUM: Allows for easy maneuverability.
• DUAL PUMP PISTONS: Quickly raises the floor jack saddle to load.
• REINFORCED LIFT ARM: Increases strength, chassis torsion control, and durability.
• VEHICLE PROTECTION: Designed with a rubber saddle and a foam handle bumper.
• SIDE-MOUNT HANDLE: Allows for convenient jack positioning.
• 2 PIECE HANDLE: Allows for easy storage.

User questions & answers

Question:	how smoothly and slow can a vehicle be lowered
Answer:	This fuel pressure reghulator is set at 43 PSI - identical to the OEM regulator. -Sean 818-574-FUEL
Question:	What is the height range
Answer:	Yes, this will fit the 2013-2018 Can-Am Maverick / Maverick Max 1000 . -Sean 818-574-FUEL
Question:	How big is the saddle and rubber pad on this jack
Answer:	This will be a 100% direct fit for the 2009-2018 Outlander 650. -Sean 818-574-FUEL
Question:	where is arcan made
Answer:	Yes, this will be a 100% direct fit for the 2013-2015 Can-Am Maverick 1000. -Sean 818-574-FUEL

Product description

Product Dimensions:17.6 " x 10.6" x 4.5" Minimum Height: 3.25" Maximum Height: 13.25" Weight Capacity: 1100 lbs. Platform Dimensions: 16" x 10"

• Solid steel construction in a blue and black powder coated finish
• Simple crank operation
• Designed to fit most motorcycle models
• For use in the garage, shop, or at the track
• 10.6 Inch Wide Deck

User questions & answers

Question:	Does this roll
Answer:	I would suggest using this in the fx loop of your amp
Question:	Will this lift front end of a harley tri glide?Also will it block getting to oil drain hole
Answer:	Yes, you can have any combination of the effects running at the same time: 1, 2, or all 3.
Question:	How many threads per inch on the shaft
Answer:	No. You dial on the echo repeat rate with the little knob.
Question:	How many turns of the crank are required to raise the jack to full height
Answer:	Yes. You can use any guitar pedal with bass but the frequencie spectrum isn't meant for it.

Product description

Specification

Material: steel

Color: black & red

Overall Dimensions: 12.4"L x 11.8" W x 10.4"H

Rising height: 3.9”

Net Weight: 14.2lbs

Weight Capacity: 330 lbs

Package include: 1 x Motorcycle Lift Table.

• Fully adjustable deck height allows fit for most bikes. Adjustable range: 25.2 cm (9.92 in) - 46 cm (18.11 in). The adjustable top plate is secured with a lock nut to ensure safety.
• Maximum lifting weight is 150 kg (330 lbs); Top plate size: 28 cm (11 in) *17.5 cm (6.9 in).
• Easy to assemble. The safety pin is connected to the arm so that it won't get lost.
• Made of solid steel. The durable anti-slip pad helps prevent bike slippage.
• Allows easy and controlled lifting of your off-road motorcycle

Product description

Arcan 2 Ton Extra Long Reach Low Profile Steel Floor Jack A20016 / XL2T

• COLORS MAY VARY: XL2T = A20016
• LIFT RANGE Provides the lowest low height (2 75”) and the highest high height (24”) compared to the average jack
• LOW PROFILE FRAME For easy access under low ground clearance vehicles
• DUAL PUMP PISTONS Quickly raises the floor jack saddle to load
• STEEL CONSTRUCTION For heavy duty use
• UNIVERSAL JOINT RELEASE MECHANISM Provides precise control of jack
• 32” EXTRA LONG CHASSIS

User questions & answers

Question:	What is the outer diameter of the saddle
Answer:	The outside diameter of the saddle on the floor jack is 3 13/16".
Question:	Product warranty/ replacement parts
Answer:	1 year warrantyRepair or replace any part or unit that proves to be defective in material or workmanship. 1-800-879-7316
Question:	Does this jack have overload protection? I had one that did so by breaking the piston
Answer:	Yes, the manufacturer's website states that there is a relief valve for overload protection. Source: http://www.powerstationusa.com/brands/Arcan/product.php?mod=XL2TI bought this jack about a year ago and have enjoyed using it on cars, heavy duty trucks and our zero turn mowers. It is a fantastic product!
Question:	Recommendations for rubber pad accessory that fits snugly or rubber padded saddle replacement that fits into pintle hole
Answer:	I used this and this fit perfectly into the hole. I didn't want the underside to get damaged so I got this. I'm thinking about buying two for the hell of it. A little slippery but I'm sure you can spray some grip spray and it'll work even better.https://www.amazon.com/gp/product/B000NSMXPY/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1

Product description

Sunex's 3-ton aluminum jack with 2 3-ton aluminum jack stands provides you with solutions that fit almost any application. Its features include a low profile, quick-lift technology, lightweight aluminum body, and rapid rise technology that reaches max height in only 7 pumps.

• Lightweight aluminum body nearly half the weight of steel jacks
• Rapid rise technology reaches max height in only 7 pumps without load
• Includes pair of 3 ton aluminum jack stands
• Low profile

User questions & answers

Question:	Could this be stored outdoors since it’s aluminum
Answer:	Short press MFB on side for play/pause or to answer or end phone call
Question:	How high does this go
Answer:	Yes they are
Question:	What does the hydralic jack alone weigh
Answer:	Hi, Thanks for your time on us. Sure friend, you can easily skip to next track or back to previous song through the multifunction button. Next track： Quick Double-Click on R earbud Volume +： Quick Triple-Click on R earbud Previous Song：Quick Double-Click on L earbud Volume - ：Quick Triple-Click on L earbud Hope this will help you a lot. If any other problem, pls contact via [email protected], we are glad to serve at you. Best regards, Vislla Team
Question:	Does it come with a case or is a case available? If not, not buying since it needs to be portable and stowable for me
Answer:	You can use just one. I do it all the time.

Product features

Vehicle Protection

Designed with a rubber saddle and a foam handle bumper.

Easy Jack Storage

Handle can be seperated into two pieces for easier storage.

Rapid Rise Technology

Dual pump pistons quickly raise the floor jack saddle to load.