13 best floor jack for trucks

Product description

Fast Lift to the Jacking Point

Blackhawk B6350 Service Jack is a 3-1/2 ton (7,000 lbs) capacity service jack that features the unique design of fast list technology to fast lift to the jacking point with no load.

It features the swivel saddle that provides you with the easy jack positioning and user safety. Its heavy duty steel construction also provides you the safe use and long term durability.

Blackhawk B6350 Service Jack also features the bypass device that preventing the damage from over pumping.

Blackhawk B6350 Service Jack also features the built-in internal safety valve and vent plug to ensures the safe operation.

- 3½Ton (7,000 Lbs.) Lift Capacity

- Fast Lifting Technology

- Heavy Duty Steel Construction & Swivel Saddle

- Built-In Safty Valve and Bypass Device

Blackhawk B6350 Service Jack is backed by the full one year warranty from the date of the purchase.

Click the buy button now to get your long lasting professional sevice jack

• Built-in internal safety valve and vent plug ensures safe operation
• Swivel saddle provides easy jack positioning and user safety.Saddle Diameter: 4 inch
• 3.5-ton/7,000 lb. lift capacity
• Jack Size: 28 1/2" L x 13 3/4" W x 6 1/2" H
• Rugged universal joint for precise load control
• Great for working in the garage and other outdoor activities such as picnics or ball games
• Note: The hydraulic jack is designed to lift, not to support the object. Immediately after lifting, loads must be supported by a pair of appropriately rated jack stands

User questions & answers

Question:	Hi, Wondering if it will fit my new XtremepowerUS 1/2 Ton Transmission Hydraulic Floor Jack Adapter it has a 1 1/4 inch hole
Answer:	I would say no. The hole in this jack only measures 1 1/8". It would seem your adapter needs an 1 1/4" hole for the "peg" to drop into .
Question:	How high does it lift
Answer:	The lifting range on the jack is 5.5" to 22" H.
Question:	Will this fit under a low profile car like a 350Z
Answer:	It's unlikely. I have a 2006 Mustang GT. If I'm not mistaken, a Mustang has about the same ground clearance as a 350Z. The jack will not fit under my Mustang. It's about an inch or two too tall. It is a great jack in spite of this. I use it on my other vehicle.
Question:	Anyone know of any jack that has this weight capacity, but is made in the USA
Answer:	My Blackhawk B6350 I bought 3 months ago has a made in the USA sticker. For whatever that means. Maybe to sticker was made here!

Product features

Lifting Range: 5.5 inches - 22 inches

• Note: Before it uses, it needs to make sure the release valve needs to be turned clockwise until the firm resistance is felt.
• Note: Since the hydraulic jack is designed to lift, not to support the object. Immediately after lifting, loads must be supported by a pair of appropriately rated jack stands

Product description

The Torin AT83006B hydraulic trolley floor jack is constructed with heavy duty steel, providing long term durability with an industrial luster. This floor jack has a 3 ton (6,000 lb) capacity and features a minimum lifting height of 5-7/8" and a maximum height of 20-7/8", which is ideal for most cars, trucks, vans, and SUVs. The single piston quick lift pump allows you to easily raise the jack to the desired height. A safety bypass system prevents over-loading and ensures safe operation. Equipped with large steel casters and 360-degree swivel casters for smooth maneuverability. The extra long saddle neck saves time when lifting higher vehicles. A built-in carrying handle allows for the floor jack to be lifted and moved quickly. Includes a limited 1 year manufacturer warranty.

• Hydraulic trolley floor jack is constructed with heavy duty steel, providing long term durability with an industrial luster
• Features a 3 ton (6,000 lb) capacity with a minimum lifting height of 5-7/8" and a maximum height of 20-7/8"; Ideal for most cars, trucks, vans, and SUVs
• Equipped with large steel casters and 360-degree swivel casters for smooth maneuverability; Extra long saddle neck saves time when lifting higher vehicles
• Single piston quick lift pump allows you to easily raise the jack to the desired height; Safety bypass system prevents over-loading and ensures safe operation
• Built-in carrying handle allows for the floor jack to be lifted and moved quickly; Includes a limited 1 year manufacturer warranty

User questions & answers

Question:	How long is the bar used to jack it up
Answer:	It terms of measuring the length of the bar i do not know, but its long enough for normal usage on my truck.

Product description

The Torin BIG RED T83006 hydraulic trolley floor jack is constructed with heavy duty steel, providing long term durability with an industrial luster. This floor jack has a 3 ton (6,000 lb) capacity and features a minimum lifting height of 5-7/8" and a maximum height of 20-7/8", which is ideal for most cars, trucks, vans, and SUVs. The single piston quick lift pump allows you to easily raise the jack to the desired height. A safety bypass system prevents over-loading and ensures safe operation. Equipped with large steel casters and 360-degree swivel casters for smooth maneuverability. The extra long saddle neck saves time when lifting higher vehicles. A built-in carrying handle allows for the floor jack to be lifted and moved quickly. Includes a limited 1 year manufacturer warranty.

• Hydraulic trolley floor jack is constructed with heavy duty steel, providing long term durability with an industrial luster
• Features a 3 ton (6,000 lb) capacity with a minimum lifting height of 5-7/8" and a maximum height of 20-7/8"; Ideal for most cars, trucks, vans, and SUVs
• Equipped with large steel casters and 360-degree swivel casters for smooth maneuverability; Extra long saddle neck saves time when lifting higher vehicles.Handle Length:24.5 inch
• Single piston quick lift pump allows you to easily raise the jack to the desired height; Safety bypass system prevents over-loading and ensures safe operation.Rubber-tipped tongs
• Built-in carrying handle allows for the floor jack to be lifted and moved quickly; Includes a limited 1 year manufacturer warranty

User questions & answers

Question:	i actually have 2 questions. Can this lift a ford explorer and can the long neck be removed
Answer:	The height is 9 1/4"+ a fraction. If you want to say 9 3/8" to be on the safe side you should be good.
Question:	Is there a longer neck I can buy for it
Answer:	Home Depot's website says 10-1/8 to 16-3/8 in.
Question:	Made in USA
Answer:	Home Depot's website says 10-1/8 to 16-3/8 in.
Question:	With long neck attached, and jack all the way down, what is the height
Answer:	Walmart's website says the non-double pin version is made in China so I assume this version is too.

Product features

Torin BIG RED Hydraulic Trolley Service/Floor Jack with Extra Saddle (Fits: SUVs and Extended Height Trucks): 3 Ton (6,000 lb) Capacity, Red

Product description

Fit Under Low Ground Clearance Vehicle

Pro-Lift F-767 Grey Low Profile Floor Jack is a 2 Ton floor jack that give you better access to low ground clearance vehicle. And,give you the lifting range from 3-1/2 inches to 14 inches.

The Jack can be fit under a clearance of 3-1/2 inches and maneuvered easily into position.

Pro Lift F-767 floor jack also features the heavy duty steel construction that provides the long lasting durability.

Pro Lift unique patented bypass device protects against over pumping. Its built-in safety valve provides overload protection.

- Extra Low Profile

- Lifting Range from 3-1/2 inches to 14 inches

- Patented bypass device protect over pumping

- Built-In Safty Valve Provides overload protection

Pro Lift F-767 floor jack is backed with SFA 90 Days Warranty from the Date of Purchase.

Take one now to access to the areas you never access before.

• Extra low profile
• Lifting range of 3-1/2 inches to 14 inches
• Patented bypass device protects against over pumping for safe operations
• Built-in safety valve provides overload protection. Rust Resistant
• Heavy duty steel construction provides long term durability

User questions & answers

Question:	Does it come with a portable case
Answer:	No, but the box it comes in is pretty sturdy. If you remove the cardboard packing the jack easily slides back into the box. The inside bottom of the box is reinforced. Not sure how long it will hold up, but it’s better than nothing.
Question:	Will this raise a 2011 cadillac cts enough to get jack stands underneath it? i want to change transmission oil ... thanks
Answer:	A Cadillac CTS is roughly 4,300 pounds. Which is a little over the capacity of this jack. As long as you're placing it on jack stands and you don't leave the jack holding it too long, it should be okay. Although all the armchair experts on this site will implore you to buy a 3 or 4 ton jack. Just remember to always put the car on jack stands and do your work on a flat, level surface.
Question:	Can anyone tell me the outside diameter of the lifting cup? Thanks
Answer:	The cup itself is 2 1/4 inches, with the inner portion (The part that spins freely, with the 4 tabs) 1 7/8ths, and the tabs extend about 1/4 inch up from the cup. Hope this helps.
Question:	What kind of oil does this take? The screw was loose when it was shipped to me and some oil had poured out into the box. I just want to top it off
Answer:	hydraulic jack oil. The screw IS loose upon arrival. If you read the SHORT instructions....this (grey) screw is HOW TO LOWER the jack when you are done lifting and have supported the weight/vehicle with jack stands. Turning just a bit using the handle you used to pump up the vehicle - you will notice it lower ever so gently. ONCE it is fully lowered - it is best to immediately turn the screw clockwise until it stops - this prepares the jack for its next use. Do this so you will not forget it is closed. IMO - some people with oil spewing - did not 'get it' how important it is to assure the valve is closed BEFORE raising the vehicle.

Product features

Pro-Lift F-767 Grey Low Profile Floor Jack - 2 Ton Capacity

About Us:

Our ProLift hydraulic automotive jacks, lifts and garage equipment range will cater to many 'do it yourself' enthusiast. The product line includes bottle jacks, floor jacks, garage jacks, aluminum jacks. scissor jack, lawn mower lifts, utility lifts, chokes, dirt bike lift, creepers, mechanic seats and more! Explore our range on the products page.

ProLift has become a global presence in the go to automotive garage maintenance equipment with locations in the United States, The Netherlands, Taiwan and Australia. We create dependable and reliable performance hydraulic equipment.

Product description

The K Tool International 3 ton service jack provides a reliable and efficient way to lift in the shop.This service jack has the capacity to lift up to 3 tons or 6,000 lbs. This product is made of heavy duty steel and NOT Aluminum which separates our products from competitors. Nobody wants scuffed and scratched up floors. This service jack is fit with nylon wheels instead of metal wheels. This will help ensure your shop or garage floors won't scratch or scuff. Jack includes these different specs: Length: 24"; Chassis Width: 13.4"; Handle Length: 39.4"; Saddle Diameter: 3.75". Jack has built in valve system to prevent use beyond rated capacity and over extension of ram. This service jack's swivel rear casters make it easy to maneuver and position within the shop. Since 1984, K Tool International leads the market by ensuring that its products are rugged, reliable and reasonably priced. Since 1984, K Tool International leads the market by ensuring that our products are rugged, reliable and reasonably priced for any level of user and shop.

• [3 TON CAPACITY] Needing to jack your car or truck? This floor jack 3 ton is rated to lift up to 6,000 lbs.
• [LIFTING RANGE] Service jack has a lifting range of 5.5" - 18.75". This service Jack provides flexibility for a variety of automotive needs
• [BUILT-IN VALVE] The valve prevents over-extension of hydraulic ram and jack use beyond rate capacity. Added protection for the lift
• [SWIVEL CASTERS] The swivel rear casters and saddle provide smooth maneuvering and positioning around cars and trucks. Wide track front wheels provide stability while rear swivel casters provide easy maneuverability
• [NYLON WHEELS] Nylon wheels will protect the floor surface in the shop or garage. Aluminum wheels often scratch and scuff up shop and garage floors. Our wheel material prevents that

User questions & answers

Question:	Where is it made
Answer:	Well of course
Question:	what is the actual jack weight - not 65.9 pounds
Answer:	iwiss SN-28B
Question:	Jack delivered today. Inside the box was a short, fat, bolt that looks like it is a plug for the hydrolics. Where does it go
Answer:	Yes they are gold plated
Question:	Does this jack come with a box to carry around in so you do not have to carry the jack around yourself
Answer:	You have to have crimpers. No solder. Criminal on

• Safely lifts and holds unibody and body-on-frame vehicles, 3 ton capacity
• Combines jack stand and Hydraulic bottle jack in one unit, eliminating need for separate jack stand
• Height range: 11 inch to 21 inch
• Designed to safely Lift and hold both Regular and unibody cars and trucks
• Highly durable
• Safely lifts and holds Unibody and body-on-frame vehicles
• Combines jack stand and hydraulic bottle jack in one unit, eliminating need for separate jack stand
• Safety bar locks the unit desired height

User questions & answers

Question:	Will this work on a 2012 Toyota corolla
Answer:	The 6000 will need 11.25 inches of clearance to get to the lifting point. I suspect your jeep wrangler Sahara has that, but best to measure to see if you have that clearance. BTW, the lifting height of the 6000 is 11.25 to 17.5 inches.
Question:	What is the stroke length of the bottle jack on the 4000 lb model
Answer:	It's very good, lt will work on 2016 hrv
Question:	Which jack should I get for my 2017 jeep wrangler Sahara the 4000 or the
Answer:	Yes, I've tried several different flavors of the ALO brand, and they all contain pieces of aloe pulp (same consistency across each flavor, they just absorb the flavor of the beverage). Compared to another less-expensive brands (Aldi, Dollar General), this contains more aloe (and tastes better in my opinion).
Question:	Will it work on 2016 honda hrv
Answer:	If I had to rate how much it would be 30% percent but a small delicious amount very smooth

Product features

Powerbuilt 6000 Lb. Unijack Bottle Jack & Jackstand in One

The Powerbuilt Unijack is designed to safely lift and hold both regular and unibody cars and trucks.

All Unibody vehicles have factory-approved lifting points to prevent damage when jacking up the vehicle. But with a conventional jack, it’s challenging to properly lift and hold a unibody vehicle, because once the vehicle is raised with a jack, there’s no space left to add a jackstand.

The Powerbuilt Unijack solves this problem with an ingenious design that both safely lifts and securely holds a Unibody vehicle using a single lift point. The Unijack offers both concave and flat lifting surfaces to accommodate a wide variety of lift points.

What’s more, Unijack eliminates the cost and hassle of a floor jack, it’s easier to lift, move and store and costs a lot less too.

The 6000 pound Unijack offers lift range from 11 to 21 inches, which makes it perfect for trucks, SUVs and vans.

Product description

This heavy duty 3 Ton car jack gets vehicles almost two feet off the ground. Extra-low profile reaches under most show cars. Dual piston Rapid Pump technology lifts most work loads in just 3-1/2 pumps.

• Super-tough precision welded construction with an industrial grade finish
• Industrial quality for professional mechanics and hardcore automotive enthusiasts
• Rapid Pump exclusive dual parallel pump system lifts with far fewer pumps
• Universal joint release provides precise load control in any handle position
• Extra-wide steel casters for stability

User questions & answers

Question:	Is this jack suitable to lift my motor to replace freeze plugs under the motor mounts
Answer:	The jack dose not stay up
Question:	What is the diameter of the saddle? Looking to get a rubber pad and need to know the size
Answer:	Outside diameter of the saddle pad is 4 1/4" .... There is a shoulder ( approximately 1/4" or more) to consider and inside diameter of it is 3 5/8" ... If I were putting a rubber pad on mine, I would stick with a 3 1/2" diameter... Another option, to maintain full pad diameter, would be to go with a 4 1/2" rubber pad and machine a surface just for that shoulder and the 4 dog ears that stand even a little taller. Good luck...
Question:	What is the maximum height when fully extended? In inches please. Thanks
Answer:	Maximum Lift Height (in.) 19-3/4 in.
Question:	Do i need to also purchase jack stands or will this do the job on its own
Answer:	YES. An automotive floor jack serves ONE PURPOSE: to elevate a vehicle TEMPORARILY to permit clearance for one or more floor jacks to support the vehicle. This floor jack does not come with stands. You must purchase a pair of floor jacks separately. Do not use this or any automotive floor jack to support a vehicle.

• Dimensions: 9.75"L x 9.75"W x 12.25"H. Patented design combines jack stand and bottle jack in one unit
• Safety bar locks unit at desired height. This jack is for trucks and off road type vehicles
• Portable jack designed to safely Lift and hold both Regular and unibody cars and trucks
• Highly durable. Wide steel base for stability under load. Height range is 11 inch to 21 inch, but its default lift range is 11 to 17.25 inch, it can be raised to 21 inch if adjusted manually
• Strong safety bar keeps jack from lowering once it has been raised to maximum height

User questions & answers

Question:	I lost the jack arm, how can i get a replacement
Answer:	I purchased the jack to jack up my utility trailer. Tractor Supply used to carry this jack, they no longer carry it., so I went on line & Found that Powerbuilt is the manufacturer.... Google them, & send them a note, about needing the jack arm.
Question:	How do you release the safety latch? Help
Answer:	Raise the jack, lift the latch while lowering the jack.
Question:	What is the exact measurement of this jack? For storage purpose
Answer:	I measured it in half light so do not bet the farm on the answer but it should be close. The base is 9"X9" and it is nearly 13" tall. That will get you close.
Question:	I see a lot of bad reviews on quality, does anyone know if they are better built now? Has there been a quality control or design improvement
Answer:	You must be working for a company that does not make or represent the Powerbuilt name. By your question about quality, you are going off of rumors and gossip.I have been in the very dangerous employment of glazing, sandblasting, industrial coating, waterproofing, painting, industrial and commercial building repair, and skyscraper window washing. Safety and quality of tools for myself and my crew is my first concern. I actually was a consultant for Landa Pressure Washers,and many Industrial Chemical Companies like Shermiin Williams and Miller Paint. Many things can go wrong when you'r 80 feet up on a crane at the shipyards,or sandblasting, testing , and coating a Bridge in Portland Oregon, or just fixing your truck or car. Powerbuilt tools, and especially this #640912 keeps me verysafe, better than a car jack alone or a jack stand alone. Look up what the Fire Departments and first responders use at your local Safety Equipment Supplier.Look up the Fisk Descender, a safety device made by my previous employer and inventor, Brian Fisk. We used this safety device to descend from buildings andCranes, and Holding Tanks at the Refineries. I pressure washed 8 to 10 story buildings hanging to prep them for coating or waterproofing or caulking. When I needthe safest support product I know to crawl under and work on a heavy machine or vehicle or industrial motor at Frito Lay or a support beam at Robinson Dairy, you'llsee this Powerbuilt 640912 keeping me safe. Now that I am retired from the Industrial world, I will continue to stand by and consult and train people with manyother Powerbuilt products.

Product features

Powerbuilt 3 Ton All-in-One Jackstand/Bottle Jack

The Powerbuilt 3 Ton All-in-One UniJack is designed to safely lift and hold both regular and unibody cars and trucks.

All Unibody vehicles have factory-approved lifting points to prevent damage when jacking up the vehicle. But with a conventional jack, it’s challenging to properly lift and hold a unibody vehicle, because once the vehicle is raised with a jack, there’s no space left to add a jackstand.

The Powerbuilt 3 Ton All-in-One solves this problem with an ingenious design that both safely lifts and securely holds a Unibody vehicle using a single lift point. The Unijack offers both concave and flat lifting surfaces to accommodate a wide variety of lift points.

What’s more, it eliminates the cost and hassle of a floor jack, it’s easier to lift, move and store and costs a lot less too.

The 6000 pound All-in-One offers lift range from 11 to 21 inches, which makes it perfect for trucks, SUVs and vans.

Product description

1 to 2 Strokes to Allow You to Lift Immediately to Your Desired Load Height

Pro-Lift G-737 Garage Jack is a 3-1/2 garage jack that features speedy lift function. It allows you to immediately lift to your desired load height with 1 to 2 strokes.

It also features universal joint release mechanism to provide precision control of load descent in any handle position.

Pro Lift G-737 Garage Jack is built with the rolled side frame to add strength and reduce twisting. And, its rear swivel casters give you the easy jack positioning. In addition, it features the rubber saddle pad to protect the vehicle while working with the jack

Plus, there is a magnetic tool tray built - in. It gives you the place to keep small parts around the job site for convenience.

- Rubber Saddle Pad to Protect the Vehicle While Working with the Jack

- Universal Joint Release Mechanism to Provide Precision Control

- Magnetic Tool Tray for Convenience, Also Speedy Lift Technology

- Rolled Side Frame and Rear Swivel Casters

Specifications

- Capacity: 3-1/2 Ton

- Lift Range: 5-1/2 to 22 inch

- Package Dimension: 30.3 x 6.9 x 15.75 inch

- Item Weight: 90 Lbs

Pro Lift G-737 Garage Jack is backed with SFA 90 Days Warranty from the Date of Purchase.

Click the buy button now to get your Speedy Lift Garage jack

• The product is 3-1/2 ton garage jack
• Easy and simple use kit
• The product is manufactured in china
• Rubber saddle protects the vehicle while lifting the vehicle
• Universal Joint release mechanism provides precision control of load descent in any handle position
• Magnetic tool tray keeps the small parts around the job site for convenience
• Rolled side frame adds strength to reduce twisting; professional grade
• Foam handle provides comfort to the user while pumping

User questions & answers

Question:	Is this jack "speedy" with weight on it? Or only until you get it started
Answer:	Capacity: 3-1/2 Ton- Lift Range: 5-1/2 to 22 inch- Package Dimension: 30.3 x 6.9 x 15.75 inch- Item Weight: 90 Lbs
Question:	How long is the handle
Answer:	The saddle w/rubber pad is removable and I suppose if you had a trans adapter that mounts the same. I would check with the manufacture, Shinn Fu America.
Question:	What is the range of lift height in inches
Answer:	This is a 6000 lbs jack with lifting range 11 - 21 inches mainly for truck and large SUV. Toyota Corolla is a small car and the bottom height seems not high enough to put this jack underneath. You may look at other Powerbuilt lower profile jack such as below links https://www.amazon.com/Powerbuilt-620484-Inflactor-Electric-inflator/dp/B01N7RFSGG/ref=sr_1_8?dchild=1&keywords=powerbuilt+jack&qid=1610355068&sr=8-8 https://www.amazon.com/Powerbuilt-240076-Profile-Fast-Floor/dp/B07FSTQ944/ref=sr_1_2?dchild=1&keywords=powerbuilt+jack&qid=1610355233&sr=8-2
Question:	Can the saddle be removed to install a trans jack adapter
Answer:	The 4000 pound Unijack offers lift range from 8-5/8 to 18-3/8 inches, which makes it perfect for sedans, minivans and crossovers. Read more at https://www.powerbuilt.com/products/4000-lb-unijack-bottle-jack-jackstand-in-one#RhgJ8m0L7kYgLlRe.99

Product features

Pro-LifT G-737 Grey Speedy Lift Garage Jack - 3-1/2 Ton Capacity

• Innovative design of Speedy Lift technology offers a quick lift for professional performance
• Swivel saddle provides easy jack positioning and user safety
• Heavy duty, steel construction provides safe use and long term durability
• Bypass device prevents over pumping
• Built-in internal safety valve ensures safe operation
• Rear caster for easy jack positioning

Product description

3 Ton Heavy Duty Ultra Low Profile Steel Floor Jack with Rapid Pump Quick Lift

Capacity: 3 Ton (7000LBS)

Saddle lifts: 5-1/4'' to 18-1/4'' (133mm to 465mm)

Saddle diameter: 4-1/4''

Saddle swivel: 360 degrees

Overall dimensions: 27''L x 1/2''W x 6-1/8''H

Front wheel diameter: 3-1/6'' x 2'' wide

Rear wheel diameter: 2-3/8'' x 1'' wide

• Dual pump pistons are shielded to prevent contaminants from damaging the hydraulic system

• Internal by-pass valve protects the hydraulic system from over pumping

• Complete with long two piece handle for ease of operation and reduced operator fatigue

• Heavy gauge construction features rolled edges for added strength

• Robust and durable steel body provides rigidity and stability

• Upgraded casters allow greater maneuverability and easy positioning of the jack

• Full cover rubber saddle pad protects the vehicle from damage during lifting

• Complies with ASME PASE/2014 Safety Standard

• POWERFUL & CONVENIENT: Robust and durable steel body provides rigidity and stability. Points of the vehicleSwivel saddle for convenient positioning under the vehicle
• 2 PIECE HANDLE: Complete with long two piece handle for ease of operation and reduced operator fatigue.
• VEHICLE PROTECTION: Rubber cushion on the saddle prevents marring of the lift. Cushion on handle prevents damage to the vehicle
• OVERLOAD PROTECTION: Built-in safety valve protects against overloading of jack at 120% of capacity
• COMPLIES WITH ASME PASE-2014 SAFETY STANDARD: Our lifting equipment through rigorous safety certification process
• Complies with ASME PASE/2014 Safety Standard

User questions & answers

Question:	are the casters steel
Answer:	Yes they are steel wheels and the jack is very well built !
Question:	What’s the plastic bag of Orings for
Answer:	It's a seal kit if it starts to seep fluid due to banging the jack around !

Product features

3-Ton Heavy Duty Steel Floor Jack with Double Pump Quick Lift

3Ton (7000LBS) Lift Capacity

Heavy Duty Steel Construction & 360 degrees Swivel Saddle

Built-in safety valve protects against overloading

Heavy-duty swivel rear castors for smooth movement and positioning

Hydraulic oil by-pass system protects ram from being over extended

Dimensions: (27× 13-1/2× 6-1/8) inches

Double Pump Mechanism:

Dual parallel pump system lifts with far fewer pumps.Quickly raises the floor jack saddle to load.

Saddle Prevents：

Rubber cushion on the saddle prevents marring of the lift points of the vehicle.

Swivel saddle for convenient positioning under the vehicle

Fast Lifting Technology:

Quick start technology ensures that after the 1st stroke, the hydraulic floor jack moves up 3 times more than the standard jack

Product description

The Torin TCE TCET825051 hydraulic trolley floor jack is constructed with heavy duty steel, providing long term durability with an industrial luster. This floor jack has a 2.5 ton (5,000 lb) capacity and features a minimum lifting height of 3-3/8" and a maximum height of 14-15/16", which is ideal for most cars, trucks, and SUVs. A safety bypass system prevents over-loading and ensures safe operation. Equipped with large steel casters and 360-degree swivel casters for smooth maneuverability. A built-in carrying handle allows the floor jack to be lifted quickly for ultimate portability. Includes a limited 2 year manufacturer warranty.

• Hydraulic trolley floor jack is constructed with heavy duty steel, providing long term durability with an industrial luster
• Features a 2.5 ton (5,000 lb) capacity with a minimum lifting height of 3-3/8" and a maximum height of 14-15/16"
• Ideal for most cars, trucks, and SUVs; Safety bypass system prevents over-loading and ensures safe operation
• Equipped with large steel casters and 360-degree swivel casters for smooth maneuverability
• Built-in carrying handle allows for the jack to be lifted quickly; Includes a limited 1 year manufacturer warranty

User questions & answers

Question:	Does this jack has a 2yr warranty or 1yr warranty, in one area of the description it says 2 and in another area it says
Answer:	This jack is 2 year warranty.
Question:	Is this floor jack made in China
Answer:	Yes, mine was.
Question:	I need to raise a shed. Could I use this jack to lift it at the corners
Answer:	It depends on the weight of your shed and the height you need to lift，If your shed weighs less than 4000 lbs and the max lift height is less than 14-15/16", it can be used.
Question:	does it come with a case
Answer:	A case? You mean something to store it in? If this is what you mean, then NO it does not come with a case, but it does have a handy carrying handle.

Product description

Pro lift F-2315PE hydraulic trolley jack has the 3000 lbs. capacity. It gives you the ability to lift from 5.25" to 12". it is built with All welded steel frame construction and rust-resistant. Large steel casters and swivel casters provide easy maneuverability.

• Min. Height: 5.25", Max. Height: 12"
• All welded Steel frame Construction with rust resistant
• Large Steel casters and swivel casters for easy maneuverability
• Sturdy carrying handle
• Blow mold case for easy storage

User questions & answers

Question:	Is it good for a 2016 lexus is 200t fsport
Answer:	This is a small jack that is good for something the size of a Camry. I did use it once on a Toyota Prado Land Cruiser with blocks of wood and it struggled. It is not commercial quality. and
Question:	Is this good for a 2012 chrysler
Answer:	good for any car with the clearance. always check your manufacturer owners manual for auto jack lift points. many cars use unibody construction and serious damage can occur if jack placed incorrectly.
Question:	Is it good for changing tire on riding lawnmower
Answer:	Don’t buy it... i did and it works only two times 👎
Question:	Is it good to use on a 2003 subaru outback wagon
Answer:	It’s garbage. Don’t waste your money. Spend a little more and get something that you can trust. Mine failed the first time trying to lift a compact car.

Product features

Pro-LifT

Our lifting equipment products have consistently led the industry in quality and innovation. Designed after professional grade equipment standards, Pro-Lift equipment is kept under close quality control standards from factory to your home. Our products provide a unique twist to your garage maintenance needs.

Product description

High Lift jacks, ideal for SUVs, VANs, Pickups and any raised chassis vehicles. May not fit under regular sedans or small sized cars.

• 21 inches High Lift suitable for SUVs and off road vehicles
• Capacity: 3 Tonne
• Lifting range 190-530mm (7.5-21inches)
• New Improved Hydraulics will last 10X more lifts operations, if your jack hydraulics failed in the 3 years warranty period, we will replace it for free
• 3 years warranty on any Hydraulic failures and 1 year on all other parts

User questions & answers

Question:	Can the saddle be completely removed? If so, what size is the hole where it is screwed in; in mm
Answer:	Nope Mine won’t unscrew to that point
Question:	Does it come with a case
Answer:	Mine did not come with a case.
Question:	I bought this item and did not received a warranty paper. Comes in the box
Answer:	Me either
Question:	I ordered this jack and right out of the box it wont lift. The grey screw in the middle is tightened, but jack still wont lift. Help me plz
Answer:	Send a message directly to the company via your orders page. They responded quickly yo a question I had. My jack did not have this problem.