9 best stanley framing nailers

Product description

How do you make the best even better? Simple, you listen to what your customers want and you make it happen. Easier to maintain…Done! Interchangeable parts with the original tool…Done! Less parts in the trigger…Done! No composite parts in the trigger…Done! Add a rafter hook…Done! The NV83A5 is not only a tool for the pro it’s also the tool that provides an answer to the pros needs. Relying on the same cylinder valve drive system as the original NV83A, the NV83A5 offers both a rapid response and some serious driving power. The side load pop-out magazine only adds convenience to an already awesome tool.

• Hitachi Power Tools has renamed to Metabo HPT. Same great tools, with only a new name.
• Tool-less depth or drive adjustment for flush fastening in varying materials
• Selective actuation on trigger allows for either sequential or contact nailing
• Cylinder valve drive system for Rapid response and increased durability
• Side load pop-out MAGAZINE for fast and easy reloads. Piston Reciprocating Action Driving System
• Hardened claw tip resists wear & grips more for driving nails at different angles

User questions & answers

Question:	Does it shoot 2 3/8 in X.113 nails
Answer:	It depends on which plan you want to make. Go to their website and look under "Jig and Fixture Components - Build-It-System" and find the one you want. I built a Bridged Crosscut Box, that required some additional parts from INCRA and some wood and screws for the fence and bridge. This needed the starter kit plus 36" T-Track Plus, a 36" and 18" board for the fence and bridge, an additional Large Build-it Panel and another Miter Slider.
Question:	Why is this 2lbs less than the Metabo
Answer:	I don't own a bench dog but I can tell you that the throw length (the push into the cutter) varies depending on the miter slot distance from the cutter. I had to make some modifications to the Kreg devise to make it work on my machine. This is a well thought out system in regards to cutting mitered frames but has very little tolerance or range in respect to all of the router table systems on the market. I needed to make at least 6 adjustments to the devise for it to work on my router table, which would probably void any warranties. I have 7 router tables, dedicated one for this devise and haven't used it in over a year. I found that coping or hand mitering the trim was faster. If I was to give this a 1 to 10 rating it would be a 3.
Question:	works to nail plywood on concrete
Answer:	The fence on the Kreg Beaded Face-Frame System is 28" long.
Question:	This nail gun will work with 15°nail gun
Answer:	If it has the same track or screw to fit your table then yes I would think so. I fitted mine to a Jessem router table
Question:	When you guys gonna have better hooks for the nail gun
Answer:	Melissa,You will need a router with a 1/2" collet. A router greater than 3hp or better is best.
Question:	What size hose does this take
Answer:	I am not sure of how your Delta saw is configured. I can't imagine a Delta saw not being in the front of the line with regard to saws that Vega would want to accommadate. I ordered the Vega system for my early 70's Craftsman 10 inch saw and ,"Yes" I was nervous since I did not take the price of the system lightly. I ordered the unit and when it arrived I was intimidated for a very brief period. Once I started the install, I became very confident that the unit would work with my saw. The Vega system is so universal that it would be difficult to not be able to install it on almost any saw. The most that may be needed on most saws may be to drill a hole or two in the saw base (table) . Once installed on my saw, I calibrated the fence and when that was done, I could use the calibrations on the Vega Fenceto make very accurate cuts. The Vega system has been one of my better investments in woodworking. Not sure I have answered your particular question but I believe in theVega system after having used it.
Question:	What all comes with it
Answer:	I don't know. The mounting hardware is very versatile so if you're willing possibly do some drilling, you can probably make it fit. I think that you must have good access under the table to get the holes drilled and bolts in. On a separate note, I'd not recommend the 50" fence because it's unnecessarily large. If I were doing it again I'd get the 42". It's amazing how much floor space the extra 8" gobbles up. It is a great fence. Sorry I couldn't be more helpful.
Question:	Hi I was wondering when you will have the ones with the adjuster
Answer:	I just bought and installed this fence on an old Craftsman table saw model 113.298030 and I had to drill 1 hole for the back rail. The 3 other bolts, 1 more on the back and 2 for the front tube fit perfectly. Overall, very easy to install. Only complaint is the need to de-burr everything before installing. Not too big of a deal though. I would recommend this fence to my friends.

Product description

AeroPro CN83 / 83CN 1-3/4” to 3-1/4” x .131”

• Lightweight and well balanced for easy operation
• Superior power with a hardened one-piece piston driver.
• Open nose design for easy extraction of jammed nail
• Tool free depth-of-drive adjustment for flush or countersink drive into various materials
• Hardened claw tip reduces wear and limits slippage

User questions & answers

Question:	Is it made of magnesium
Answer:	Mine did not come with a case. It came in a clamshell package.It works great! Quick and no dust.
Question:	Is this low profile
Answer:	Fiber cement what? And what thickness? These are fiber cement siding shears, so yes, they are designed for cutting fiber cement siding. The specifications for the product state that they will cut 5/16" thick siding. That is true. I cut all of the 5/16" thick fiber cement siding on my 1,600 sq ft house with one set of blades, on one set of these shears. I hope that answers your question.

Product description

The CFRN9021 is one of the most versatile framing nailers in the industry. The CFRN9021 can be used in framing, Sheathing, Siding, Trusses, bridging, engineered lumber, strapping, fencing, exterior decks, And sub-flooring.

• Durable and lightweight Heat treated aluminum housing to last years of continuous use.
• Tool free depth adjustment makes it easy to ensure fasteners are driven perfectly every time.
• Comfortable non-slip rubber grip helps reduce hand fatigue for prolonged use.
• Contact and sequential firing modes give you the option to easily select the correct mode needed for your project.
• All Carpenter Air Tools products have a 7 year limited warranty so you can buy in confidence that you are receiving a quality product

User questions & answers

Question:	Que medida de clavos usa
Answer:	No, this is designed for cutting 5/16" (8mm) Fiber Cement Siding.
Question:	Does this gun shoot ring shanked nails
Answer:	2.6 might be a little light...mine is a 3.8 at 90 psi and it had to run almost every time I cut a board with it. It is a fantastic tool though...highly impressed with it's ability to sheer hardy board...
Question:	I live in germany is the warranty valid abroad
Answer:	Photo super misleading. I was so excited to get 4 malco extensions but just got the 12in Still need to get my 3in now
Question:	What is the warranty consist of
Answer:	From the information i have here, yes it should work with basically any drill that you have. One of our photos show a Dewalt 20V drill being used in conjunction with the turbo shear.

Product description

The Max USA Corp super framer SN883RH3 stip framing gun shoots a wide range of fastener from 2" To 3 1/4", plastic or paper collated nails. The SN883RH3 features our patented maintenance free end cap filter, weighs only 7lbs, has a comfortable rubber grip, reduced recoil engineering system, and is ony 11 7/8" Tall allowing for straight nailing between studs. The SN883RH3 now includes a rafter hook, as well as a swivel Plug. There is also a magnet in the nose that ensures the last fastener is shot straight and true.

• Lightweight only 7 lbs
• Nose magnet holds last nail
• Maintenance free end cap filter
• Tangle free swivel plug
• Aggressive nose for toe nailing
• Open nose for easy jam clearance
• Dial adjustable depth control
• Heavy duty steel rafter hook

User questions & answers

Question:	Upto what gauge nail
Answer:	Buy a new gun , it will cost almost as much to replace the piston .
Question:	Up to what gauge nails
Answer:	The SN883RH3 features a new ANSI Compliant Trigger System. The tool comes from the factory with a sequential trigger installed, and also includes a contact fire trigger in the carton box.
Question:	Where can I buy a replacement piston for the nailer
Answer:	21 and 34 degree tools are more common in the United States than the 28 degree. We take great pride in manufacturing our 28 degree, where other manufactures have moved on from doing so.
Question:	Is it can shot in a row
Answer:	No. This is a high pressure nailer. 300+ psi. It takes a special HP compressor. I doubt you want a hp blow gun

Product description

Sfr2190 features: -Framing nailer. -360° adjustable exhaust. -Finger depth adjustment. -Ergonomically designed comfort grip. Type of nailer: -Framing nailers. Type of fastener: -Framing nails. Generic dimensions: -20.75'' h x 15'' w x 5.75'' d. Dimensions: Overall height - top to bottom: -20.75 inches. Overall width - side to side: -15 inches. Overall product weight: -8.5 pounds.

• Nailed It: This 21 degree pneumatic framing nailer features a lightweight and durable magnesium body, ergonomic secure handle, and interchangeable trigger for quick fire or single shot function. It's ideal for professional construction contractors and home DIY projects.
• Versatile and Powerful: The framing nailer features depth adjustment and a no mar tip, making it adaptable for different working surfaces. It's perfect for framing, and it can also be used to install subfloors, roof decking, wood fencing, and sheathing.Minimum Recommended Air Delivery SCFM @ 90PSI:2.4
• The Right Tool for the Job: We're committed to providing outstanding value, top tier customer service and long lasting, high quality products. We make nailers and staplers for every purpose, from roofing to siding to flooring and everything in between.
• Quality and Durability: We manufacture tools with the most durable materials under strict quality control guidelines, suitable for professional contractors and do-it-yourselfers alike. Our tools are sold, distributed, serviced, and warrantied in the USA.
• Tough and Dependable: We make an array of durable construction tools and accessories, including staplers and nailers for siding, flooring, framing, finish, and roofing. Compare our products to similar items by Makita, Hitachi, Bostitch, Senco, Paslode, and Dewalt.

User questions & answers

Question:	will it take any brand of nails
Answer:	I have used two different brands so far. As long as the nails are plastic coated, 21 degree I believe any brand would work. The best prices I have found on nails is at harbor freight. 2500 nails for around $28. I have used 2 1/2" and 3 1/2"
Question:	How come just below the nailer specs they say "often bought with this product"....22 degree nails....not
Answer:	I used some of the 22 degree without a problem. I've used Bostich guns for 30 years prior to this gun & this is as good as any I've used.t's a great nailer
Question:	do the nails have to be plastic coated
Answer:	Plastic coated? No. But I do believe they have to be Plastic Collated, that is, they need to be bound together with plastic. I'm not sure if paper collated nails will work.
Question:	What kind of air compressor do you recommend for this nailer
Answer:	It really depends on how you're using it. If you're intermittently nailing with in and not imitating a machine gun- you can use a pancake or similar small compressor. The working pressure of the nailer is 70-115 PSI. I run mine at 100 PSI. Any portable compressor should be able to hit that pressure. The real question is duty cycle. If you're nailing every few seconds then you'll need a compressor capable of keeping up with the volume of air being consumed OR you'll have to slow down until your compressor stops running before firing the next nail. I run mine on 2 different compressors and don't have any issues- one is a 40 gallon shop compressor- the CFM is infinite compared to the gun. The other compressor is 2.6 CFM. I don't rapid fire when I'm using it and I can fire several nails before the compressor has to cycle. As long as you're not continuing to fire when the compressor is running you should be OK.

Product features

Numax 21º Full Head Framing Nailer

It's time to tackle a new project - and we have just the tool to get it done. The SFR2190 is perfect for framing, but did you know you can also use a framing nailer to install sub-floors, roof decking, wood fencing, sheathing, and more? We designed this nailer with you in mind, so it has all of the premium features you need to get started.

Step 1: Choose Firing Mode

Your framing nailer comes with a black single-fire trigger already assembled. This is the best choice if you haven't used a framing nailer before, or if you want accurate nail placement.

Follow the manual instructions to install the red bump-fire trigger if you want quick successive firing.

Step 2: Connect to Compressor

Set your compressor to 70 PSI and use the quick-connect fitting on your air hose to connect your framing nailer. If you have a really dense material, you can increase the pressure up to 115 PSI.

Put a few drops of oil into the fitting before connecting to a compressor to keep things running smoothly!

Step 3: Load Nails

Pull the side lever back along the magazine until it snaps into place.

Drop the nails into the open channel on the top of the magazine. The angle of the nails should match the angle of the nose of the nailer.

Lift the lever at the back of the magazine to release the side lever and secure the nails.

Step 4: Adjust and Go!

This nailer is loaded with features that let you customize for any project. Change the depth adjust, 360º air exhaust, or remove the no-mar tip for extra holding power.

Pro Tip: Use piece of scrap material to test out your nailer before starting on the real thing!

21º Plastic Collated Full-Head Framing Nails

A 'plastic collated nail' just means that the nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the SFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

21º Plastic Collated Full-Head Framing Nails

Plastic collated nails are held together with a thin strip of plastic. They are great for DIY projects because there are no issues with glue or sharp pieces of metal flying around when you're working. We suggest you use 21º nails for the best performance, but the PFR2190 can use any nail from 20º - 22º. The magazine fits nails from 2" to 3-1/2" long and is compatible with any generic brand, which is perfect if you have nails left over from other projects! If you don't have any leftover nails, we've listed some fasteners here that have worked for our customers in the past.

Product description

The NR90AF(S1) framing nailer drives wire weld collated nails from 2" up to 3-1/2" in length and features Metabo HPT's next generation "industrial design." The redesigned head guard allows for faster and easier disassembly process, saving valuable time during tool maintenance. Weighing only 7.3 lbs, it is easy to use all day, while still providing the power of a bulkier, heavier nailer. It can be used for floor and framing, truss build-up, window build-up, sub flooring, roof decking, wall sheathing and housing construction.

• AWARD: Rated the Pro Preferred Nailer for 7 years running (2014 - 2020) by Builder and Developer Magazine
• LIGHTWEIGHT: 7.3 lbs and well-balanced for ease of maneuverability and less user fatigue
• FASTENERS: Accepts 2" up to 3-1/2" wire weld collated framing nails
• SELECTIVE ACTUATION: Selective actuation switch allows for quick transitions between sequential and contact nailing with the simple flip of a switch
• DEPTH ADJUSTMENT: Tool-less depth adjustment dial allows the user to countersink or flush drive nails into a variety of materials without having to adjust the pressure at the compressor
• EXHAUST PORT: 360-Degree fully adjustable exhaust port directs air exhaust away from the user or work piece
• AIR DUSTER: Ideal for clearing away dust and debris from the work surface

User questions & answers

Question:	dos it shot clip head nails
Answer:	no I haven't , but may not do the tight turn. may be better off with hand crimpers.

Product description

The NR90AE(S1) framing nailer drives plastic collated nails from 2" to 3-1/2" in length and features Hitachi's next generation "Industrial Design". The newly redesigned head guard allows for a faster and easier disassembly process, saving you valuable time during tool maintenance. The NR90AE(S1) weighs only 7.5 pounds, making it easy to use all day, while still providing the power of bulkier, heavier nailers. A selective actuation switch adds the convenience of being able to quickly change between bump or sequential fire and the tool-less depth of drive eliminates the need to adjust the pressure at the compressor. The simple two-step loading makes fastener replenishment quick and easy, reducing downtime. Includes Safety Glasses (875769). Air Pressure PSI: 70 – 120, Air Consumption @ 100 PSI scfm .09, Applicable Nails Diameter in: .113 – .148, Length in: 2 – 3-1/2, Nail Capacity: 64 (.131), Magazine Angle: 21 Degrees, Magazine Loading: Rear, Actuation: Selective, Depth Adjustment: Tool-less, Jam Clearing: Open Nose

• Hitachi Power Tools has renamed to Metabo HPT. Same great tools, with only a new name.
• New head guard design allows for quicker disassembly during tool maintenance
• Lightweight and well balanced for ease of maneuverability and less user fatigue
• Selective actuation allows for quick changes between sequential and contact nailing with the flip of a switch
• Tool less depth adjustment to countersink or flush drive into a variety of materials
• Two piece anodized aluminum magazine making repairs or replacements easy and with minimal expense
• Two step nail loading allows for quick and easy reloads
• Rubber grip provides comfort and ensures a secure grip

User questions & answers

Question:	will it fit between studs or joists that are 16" o.c? Or does anyone know how big the nailer is from the tip to the top of the gun
Answer:	50 inches to the right side of the blade.
Question:	How do you oil this nailer? And how often
Answer:	mine worked great. I did put pipe dope on it.
Question:	Is this gun for full round head nails
Answer:	No
Question:	What is the difference between this one and the old one (nr90aes
Answer:	This kit comes with a flip-top white carton box that holds all the contents.

Product description

The Makita 3-1/2” framing nailer (model AN924) combines durable construction and robust performance with ease-of-use features for commercial framing applications. The AN924 is engineered for a range of applications including framing walls, floors, and roofs, construction of sub-flooring, roof and floor decking, floor and wall sheathing/Siding. It is ideal for framers, roofers and carpenters. The AN924 accepts full round-head nails, 2” - 3-1/2”, with up to . 148” (16D) shank diameter, and the 2-mode selector switch (bump, sequential) provides increased convenience. The AN924 is engineered for longer tool life and ease-of-use, with a built-in air filter to minimize dust and debris from entering. Additional features include an anti-dry mechanism that stops the tool when three nails remain in the magazine, a solid rear-loading aluminum magazine for longer service life, and rubber hand-grips to provide more comfortable handling.

• Faster nail driving speed for maximum performance
• Large capacity air chamber for increased power to drive nails up to 3-1/2" X. 148 in diameter
• Drives 21º plastic collated framing Nails from 2" To 3 1/2" In length and. 113 too. 148 in diameter
• Lightweight design at only 8. 3 lbs
• Solid top-loading aluminum MAGAZINE for longer life

User questions & answers

Question:	Why is mine making a whoopie custion sound when it fires
Answer:	Sounds like a seal or o ring is out
Question:	Does it come with rafter hook
Answer:	Yes it does come with a hook
Question:	does this Makita come with a carrying case
Answer:	No caring case Great nail gun.
Question:	New to nail guns. Are the nails proprietary to the manufacturer or can you use other brands
Answer:	you can use other brands works great

Product features

Makita AN924 21º Full Round Head 3-1/2" Framing Nailer

The 21º Full Round Head 3-1/2" Framing Nailer (model AN924) combines durable construction and robust performance with ease-of-use features for wood framing applications. The AN924 is engineered for a range of applications including framing walls, floors and roofs, as well as construction of roof and floor decking, floor and wall sheathing/siding, and sub-flooring. It is ideal for framers, roofers and carpenters.

The AN924 drives 21º plastic collated framing nails from 2" to 3 1/2" in length and .113 to .148 in diameter. It has a 2-mode selector switch (bump, sequential) for increased convenience. The AN924 has a lightweight design (only 8.3 lbs.) with durability features that include a heat-treated S7 steel driver blade, a solid aluminum top-loading magazine, and a nail lock-out mechanism that protects the tool and work surface from dry-fires. Added features include tool-less depth adjustment for flush or countersink nailing, added tool hook, and an ergonomic rubberized grip.

Product description

Remember when you had three nailers in one? Find the perfect angle with the WEN 3-in-1 Framing Nailer. Our unique design allows users to switch from 21 degrees to 28 degrees to 34 degrees depending on the needs of the task at hand. Fire 2 to 3-1/2 inch plastic-collated round-head framing nails at 21 degrees, or 2-3/16 to 3-1/2-inch wire- or paper-collated clipped-head framing nails at 28 or 34 degrees. Connect the air compressor of your choice to the 1/4-inch NPT air inlet, the nailer requiring 5.8 CFM of air at 90 PSI. The spacious magazine holds up to sixty 21-degree nails at a time, or up to ninety 28 or 34-degree nails. The removable non-marring tip prevents damage to your workpiece, while the firing selector lets you go from single to sequential firing modes with the simple flip of a switch. The hard-bodied carrying case provides an easy storage and transport solution between uses. The 9.4-pound body combines with the ergonomic rubber-backed handle to limit fatigue during long days on the job site. Onboard depth adjustment lets users select the exact depth they want their nail to fire. This nailer accepts smooth, ring, or screw shank nails ranging from .113 to .131 inches in diameter. And because it’s a WEN product, your 3-in-1 framing nailer comes backed by a two-year warranty, a stocked inventory of replacement parts, and a friendly technical support team, all to make sure you remember WEN.

• Switch the firing angle between 21 degrees, 28 degrees, and 34 degrees
• Flip a switch to easily change shooting modes from single to sequential firing
• Shoot 21-degree plastic-collated round-head framing nails between 2 to 3-1/2 inches in length
• Fire 28 or 34-degree paper- or wire-collated clipped-head framing nails between 2-3/16 to 3-1/2 inches in length
• Includes a removable non-marring tip, a rubber-grip handle, adjustable air exhaust, a hard-bodied carrying case, and a two-year warranty

User questions & answers

Question:	Where do you get extra parts from especially drivers
Answer:	Yes, it works with the foodsaver bags. I ordered a roll when I ordered the sealer, and cut the rolls down to smaller sizes when I need them. The only problem I have run into is sometimes I dont get a side sealed correctly when I cut them down, and the sealer will just keep vacuuming and not seal. Now I know to just reseal the side I cut, and once I do that it works perfectly.
Question:	Can this shoot paslode - 650385 round head 3-inch by .120 by 30 degree paper ta
Answer:	Buy small bags (quart size). Depends how small your food is, starting place the food on the bottom of the bag, shake the bag, then begin to do your sealing process. You then can place the new load in the same procedure and seal. You now have your food stack or lined up in separate compartments but one bag. The food then can be trimmed to separate them or leave it in one bag then freeze them
Question:	how long warranty
Answer:	The bags that come with the unit actually doesn't seal as well as some no-brand bag roll I bought. They are not just slightly less tightly sealed -- they are NOT sealed at all after the 1st pass! FYI, I bought this roll from Amazon: http://www.amazon.com/gp/product/B0063HZVBC It's 100% sealed in the first pass.
Question:	Is parts interchangeable with Hitachi
Answer:	Replacement shafts are available
Question:	is this nail gun similar to Hitachi nail gun
Answer:	I’ve crimped up to 20 gage sheet metal fittings, I’ve also had a co-worker crimp a 26 gage piece of spiral right over the bead and it didn’t stop this crimper. I don’t recommend doing that, but it’s made rugged and well constructed a must have.
Question:	Does it have dry fire lockout
Answer:	From Malco: This sheet metal crimping attachment is designed to work with a minimum 12 volt DC cordless or maximum 7 amp AC corded IMPACT DRIVER. No set up or adjustment is needed. Attention: Use Impact Driver Only! Minimum 12V DC Impact Driver With Quick Release 1/4 in. Hex Chuck.