14 best 3 5 ton jacks

Product description

Fast Lift to the Jacking Point

Blackhawk B6350 Service Jack is a 3-1/2 ton (7,000 lbs) capacity service jack that features the unique design of fast list technology to fast lift to the jacking point with no load.

It features the swivel saddle that provides you with the easy jack positioning and user safety. Its heavy duty steel construction also provides you the safe use and long term durability.

Blackhawk B6350 Service Jack also features the bypass device that preventing the damage from over pumping.

Blackhawk B6350 Service Jack also features the built-in internal safety valve and vent plug to ensures the safe operation.

- 3½Ton (7,000 Lbs.) Lift Capacity

- Fast Lifting Technology

- Heavy Duty Steel Construction & Swivel Saddle

- Built-In Safty Valve and Bypass Device

Blackhawk B6350 Service Jack is backed by the full one year warranty from the date of the purchase.

Click the buy button now to get your long lasting professional sevice jack

• Built-in internal safety valve and vent plug ensures safe operation
• Swivel saddle provides easy jack positioning and user safety.Saddle Diameter: 4 inch
• 3.5-ton/7,000 lb. lift capacity
• Jack Size: 28 1/2" L x 13 3/4" W x 6 1/2" H
• Rugged universal joint for precise load control
• Great for working in the garage and other outdoor activities such as picnics or ball games
• Note: The hydraulic jack is designed to lift, not to support the object. Immediately after lifting, loads must be supported by a pair of appropriately rated jack stands

User questions & answers

Question:	Hi, Wondering if it will fit my new XtremepowerUS 1/2 Ton Transmission Hydraulic Floor Jack Adapter it has a 1 1/4 inch hole
Answer:	I would say no. The hole in this jack only measures 1 1/8". It would seem your adapter needs an 1 1/4" hole for the "peg" to drop into .
Question:	How high does it lift
Answer:	The lifting range on the jack is 5.5" to 22" H.
Question:	Will this fit under a low profile car like a 350Z
Answer:	It's unlikely. I have a 2006 Mustang GT. If I'm not mistaken, a Mustang has about the same ground clearance as a 350Z. The jack will not fit under my Mustang. It's about an inch or two too tall. It is a great jack in spite of this. I use it on my other vehicle.
Question:	Anyone know of any jack that has this weight capacity, but is made in the USA
Answer:	My Blackhawk B6350 I bought 3 months ago has a made in the USA sticker. For whatever that means. Maybe to sticker was made here!

Product features

Lifting Range: 5.5 inches - 22 inches

• Note: Before it uses, it needs to make sure the release valve needs to be turned clockwise until the firm resistance is felt.
• Note: Since the hydraulic jack is designed to lift, not to support the object. Immediately after lifting, loads must be supported by a pair of appropriately rated jack stands

Product description

The Arcan ALJS3 3-Ton Steel Jack Stands has an overall 3-Ton lifting capacity and a working range of 11-5/8 in. to 17.5 in. A counterweighted pawl locks in place securely to prevent slipping, while allowing easy adjustments. A large contoured saddle with locating lugs helps support and position vehicle frame. The wide stance base delivers superior stability and includes base pads that prevents the jack from sinking into asphalt and provide stable footing for the jack stands. The welded construction and alloyed steel offer years of support. Arcan puts all of our lifting equipment through voluntary and rigorous third party safety testing, as outlined by the ASME PASE-2014 Safety Standard for Portable Automotive Service Equipment, to ensure that our products are among the safest on the market.

• COLORS MAY VARY: ALJ3T (silver) or A20018 (green)
• LIGHTWEIGHT AIRCRAFT-GRADE ALUMINUM: Allows for easy maneuverability.
• DUAL PUMP PISTONS: Quickly raises the floor jack saddle to load.
• REINFORCED LIFT ARM: Increases strength, chassis torsion control, and durability.
• VEHICLE PROTECTION: Designed with a rubber saddle and a foam handle bumper.
• SIDE-MOUNT HANDLE: Allows for convenient jack positioning.
• 2 PIECE HANDLE: Allows for easy storage.

User questions & answers

Question:	how smoothly and slow can a vehicle be lowered
Answer:	This fuel pressure reghulator is set at 43 PSI - identical to the OEM regulator. -Sean 818-574-FUEL
Question:	What is the height range
Answer:	Yes, this will fit the 2013-2018 Can-Am Maverick / Maverick Max 1000 . -Sean 818-574-FUEL
Question:	How big is the saddle and rubber pad on this jack
Answer:	This will be a 100% direct fit for the 2009-2018 Outlander 650. -Sean 818-574-FUEL
Question:	where is arcan made
Answer:	Yes, this will be a 100% direct fit for the 2013-2015 Can-Am Maverick 1000. -Sean 818-574-FUEL

Product description

This heavy-duty steel floor jack from Performance Tool has a max capacity of 7,00lbs (3.5 Tons) with a lift range of 3-1/2" to 20-1/2". The W1645 vehicle lift has a high quantity steel frame, dual pistons for faster lift, and an overload protection bypass valve, all allowing you to use this jack with confidence. The swivel saddle with rubber cushion and swivel wheels in the back allows for easy maneuverability and positioning while in confined working areas. The extra-long frame on this jack stand is designed for maximum stability and safety while the low-profile design allows users to get under almost any vehicle to lift.

• DOUBLE-PUMP MECHANISM: This swiveling vehicle lifter offers quick lifting
• RUBBER SADDLE PAD: Helps lift the vehicle safely without damaging it
• OVERLOAD PROTECTION: Bypass valve offers safety for use in any workplace
• LOAD CAPACITY: 3.5 tons, 7,000 lbs
• LIFT RANGE: Jack stand lifts from 3-1/2 to 20-1/2 inches

User questions & answers

Question:	R the wheels made of metal, or some type of non-metal (plastic
Answer:	Hi Slim, The wheels are made out of metal. This is a "beefy" jack.Hope that helps.Regards,AzNeil
Question:	Can you lower the jack from the handle
Answer:	No. Must use screwdriver (slowly, slowly) on handle end of body, to release hydraulic fluid. If the first answer is correct, Wilmar has changed the design of the jack since I bought it.
Question:	Does this jack can be lift up enough for mazda cx-5 tire change? thanks
Answer:	Yes, it will lift the corner of a Mazda CX-5 easily. I use it on a considerably heavier vehicle and have never had a problem.
Question:	where to add oil
Answer:	you would need to unscrew the pressure screw at the back, all the way out, and then use a very small funnel or a syringe. i guess it is 70 weight or so, but i have not needed to add any oil.

Product description

The K Tool International 3 ton service jack provides a reliable and efficient way to lift in the shop.This service jack has the capacity to lift up to 3 tons or 6,000 lbs. This product is made of heavy duty steel and NOT Aluminum which separates our products from competitors. Nobody wants scuffed and scratched up floors. This service jack is fit with nylon wheels instead of metal wheels. This will help ensure your shop or garage floors won't scratch or scuff. Jack includes these different specs: Length: 24"; Chassis Width: 13.4"; Handle Length: 39.4"; Saddle Diameter: 3.75". Jack has built in valve system to prevent use beyond rated capacity and over extension of ram. This service jack's swivel rear casters make it easy to maneuver and position within the shop. Since 1984, K Tool International leads the market by ensuring that its products are rugged, reliable and reasonably priced. Since 1984, K Tool International leads the market by ensuring that our products are rugged, reliable and reasonably priced for any level of user and shop.

• [3 TON CAPACITY] Needing to jack your car or truck? This floor jack 3 ton is rated to lift up to 6,000 lbs.
• [LIFTING RANGE] Service jack has a lifting range of 5.5" - 18.75". This service Jack provides flexibility for a variety of automotive needs
• [BUILT-IN VALVE] The valve prevents over-extension of hydraulic ram and jack use beyond rate capacity. Added protection for the lift
• [SWIVEL CASTERS] The swivel rear casters and saddle provide smooth maneuvering and positioning around cars and trucks. Wide track front wheels provide stability while rear swivel casters provide easy maneuverability
• [NYLON WHEELS] Nylon wheels will protect the floor surface in the shop or garage. Aluminum wheels often scratch and scuff up shop and garage floors. Our wheel material prevents that

User questions & answers

Question:	Where is it made
Answer:	Well of course
Question:	what is the actual jack weight - not 65.9 pounds
Answer:	iwiss SN-28B
Question:	Jack delivered today. Inside the box was a short, fat, bolt that looks like it is a plug for the hydrolics. Where does it go
Answer:	Yes they are gold plated
Question:	Does this jack come with a box to carry around in so you do not have to carry the jack around yourself
Answer:	You have to have crimpers. No solder. Criminal on

Product description

Pro lift T-6903D is a 3-ton double locking jack stands. It features a high quality cast ductile Iron Ratchet bar and sturdy stamped steel base provide durability and longevity which makes ideal for home, professional and farm use. Always used in pairs, counter weighted pawls serve as a safe secure locking device to prevent the load from accidental disengagement. An attached pin lock provides support, locking the ratchet bar in place for an additional carrying point. One piece, multi position ductile ratchet bar provides strength and durability as well as a quick adjustment mechanism that securely locks into the desired position.

• Sturdy stamped Steel Construction with 3 ton capacity
• High quality cast ductile iron ratchet bar
• Double locks mechanism with both handle locks and mobility pin
• Height adjustment mechanism allows smooth upward movement while release handle locks and mobility pin
• Meets or exceeds ANSI/PALD standards. Ideal for home, Auto, truck service, farm, and shop use
• Fit type: Universal Fit

User questions & answers

Question:	Where can I buy just the locking pin
Answer:	Max 16 1/2 min 11 inches
Question:	what is the extended maximum height
Answer:	It mounts to the Smittybilt Pivot hinge, so it will clear most aftermarket bumpers as long as they don’t have an integrated tire carrier.
Question:	Does it come with 2 or just one jack
Answer:	No
Question:	What are the max and min lift dimensions
Answer:	I use an insulator for the handle but the mount is very secure and makes little to no noise compared to my old one.

Product features

Pro-Lift Double Pin Jack Stands - 3 Ton

Features:

• Sturdy stamped steel construction
• High quality cast ductile iron ratchet bar
• Height adjustment mechanism allows smooth upward movement while release handle locks into position
• Ideal for auto, truck service, farm and shop use

Product description

The Torin BIG RED T80501 hydraulic floor jack is ideal for lifting heavy trucks, buses, agriculture and construction equipment. The long frame extends past the overhang of commercial vehicles. It features a 5 ton (10,000 lb) capacity and a lift range between 5-15/16" to 22". This service jack is constructed of durable, high-strength steel and has a powder-coated finish for rust resistance. The foot pedal control provides quick set-up and rise. Equipped with large steel casters and 360-degree swivel casters for smooth maneuverability. In terms of safety, this Torin service jack even comes with a built-in safety overload system which prevents use beyond load capacity. Wide stance provides added stability under load. Meets ASME PASE safety standards and includes a limited 1 year manufacturer warranty.

• Hydraulic floor jack is ideal for lifting heavy trucks, buses, agriculture and construction equipment
• Long frame extends past the overhang of commercial vehicles; Foot pedal control provides quick set-up and rise
• Features a 5 ton (10,000 lb) capacity and a lift range between 5-15/16" to 22"; Wide stance provides added stability under load
• Equipped with large steel casters and 360-degree swivel casters for smooth maneuverability
• Features a built-in safety overload system prevents use beyond load capacity; Meets ASME PASE safety standards

User questions & answers

Question:	Does this jack come shop air ready or is it manual only
Answer:	Manual only
Question:	How much does this jack weight? The item weight in the description shows 360 lbs but that seems like almost double what it should be
Answer:	this jack is extremely heavy
Question:	Where can I find some replacement back casters for this jack
Answer:	Try Tractor Supply - Grainger is guaranteed to have the highest prices.
Question:	How much is neede to lift a front tire of a semi or a loaded trailer to jack up the tire? Thnaks
Answer:	A normal semi weighs 27K pounds total. My jack picked up the semi front without a problem. Each front drive tire holds the weight of approximately 5-7K pounds. If your lifting a trailer that's loaded, it depends on the weight of what's on the load.

Product features

Torin BIG RED Long Frame Heavy Duty Floor Jack, 5 Ton (10,000 lb) Capacity

• Constructed with heavy-duty steel, providing long term durability with an industrial luster
• Features a 5 ton (10,000 lb) capacity, a minimum lifting height of 5-15/16", and a maximum height of 22"
• Safety bypass system prevents over-loading and ensures safe operation
• Equipped with large steel casters and 360-degree swivel casters for smooth maneuverability
• Foot pedal control provides quick set-up and rise
• Powder coated for rust resistance

• Car Lift Jack Electric: 5 Ton (11000lbs) lifting capacity, can lift the car in less than 2 minute, perfect for roadside tire change and repair. Remove the screws by the wrench, change a tire quickly, ideal for vehicle repairing and tire replacing.
• Electric Hydraulic Jack Set: The car jack electric has a built-in inflator pump and LED light, it also comes with an extra safety hammer. High stability and premium quality, an easy solution for vehicle / tire emergency.
• Stability & Safety: 11000 lbs capacity, lifting height ranges from 4.72 inch to 20.47 inch (120mm-520mm). Used to lift up sedans or suvs under 5 tons, but please don't use it on trucks or vehicles beyond 11000 lbs (5 tons). Easy to operate and work efficiently, please use it on the flat ground and don't get too close while it is working to avoid unexpected injury
• Necessary Car Tools: This car jack is necessary for every car.With this tool set in your trunk,you can replace the tire easily by yourself,no worry for long trip any more .
• Portable and convenient tool set, easy to use and carry with. The package box designed with warning triangle which can act as a warning sign

User questions & answers

Question:	Will this work for a 2008 Chevy avalanche
Answer:	Yes I lift trucks with mine all the time but sometimes it needs a few more inches so I will stack a couple of 2 by eights that I have cut down to 1' blocks the most of ever had to use was 3 but normally it's 1 or 2 if I even need it
Question:	Will this lift a Yukon denali
Answer:	Our jacks used to lift up sedans or suvs under 5 tons, you can refer to the tonnage of the car you purchased.
Question:	what is lift range? Picture says 6" to 17.7". Text says 4.7" top
Answer:	Haven't actually measured. But does lift one wheel up on 01 Denali on 17" rim with no wood block needed
Question:	Is this package includes jump starter
Answer:	No. The jack and impact wrench have an adaptive connector to the car battery if needed, but nothing that would work to jump start an engine.

Product features

Highly Efficient Lift The Car

Using an electric car jack to lift the car in less than 2 minute.

Car Floor Jack Set 5 ton will automatically stop working after reaching the height limit.

The self-locking deconstruction of the jack can prevent the car from falling suddenly and ensure the safety of the vehicle and the person.

The jack head uses a non-slip design a cross-shaped groove plus particles protruding from the surface to increase friction.

Jack Lift

The hydraulic jack has a Impact wrench with LED light, air pumps and safety hammer can be used in emergency situations.

The built-in inflation hose of the jack can provide enough gas for the tire.

You can monitor the tire pressure at any time through the digital display on the jack.

lift Hight

Lfit the car to its maximum height (lifting range: 6.1-7.7 inches) in just 2 minute.

Designed to work on 5T 12 Volt DC car, truck.

Multifunction-Jack

Pump and LED Flashlight can meet multiple demands.

Matching with the relevant complete small tools,safety hammer, gloves, BMC packing, engineering ABS shell.

Electric impact wrench

Electric impact wrench to tighten/unscrew the screws and replace the tires.

Easy to operate , perfect car tire repair tool for car with roadside emergencies, it may change the tire in 5 minutes.

Red Triangle Warning Sign

Jack box can be used as a warning road sign when repairing on the highway.

The Velcro outside the box prevents the toolbox from sliding inside the trunk of the car.

Product description

The Torin BIG RED T83006 hydraulic trolley floor jack is constructed with heavy duty steel, providing long term durability with an industrial luster. This floor jack has a 3 ton (6,000 lb) capacity and features a minimum lifting height of 5-7/8" and a maximum height of 20-7/8", which is ideal for most cars, trucks, vans, and SUVs. The single piston quick lift pump allows you to easily raise the jack to the desired height. A safety bypass system prevents over-loading and ensures safe operation. Equipped with large steel casters and 360-degree swivel casters for smooth maneuverability. The extra long saddle neck saves time when lifting higher vehicles. A built-in carrying handle allows for the floor jack to be lifted and moved quickly. Includes a limited 1 year manufacturer warranty.

• Hydraulic trolley floor jack is constructed with heavy duty steel, providing long term durability with an industrial luster
• Features a 3 ton (6,000 lb) capacity with a minimum lifting height of 5-7/8" and a maximum height of 20-7/8"; Ideal for most cars, trucks, vans, and SUVs
• Equipped with large steel casters and 360-degree swivel casters for smooth maneuverability; Extra long saddle neck saves time when lifting higher vehicles.Handle Length:24.5 inch
• Single piston quick lift pump allows you to easily raise the jack to the desired height; Safety bypass system prevents over-loading and ensures safe operation.Rubber-tipped tongs
• Built-in carrying handle allows for the floor jack to be lifted and moved quickly; Includes a limited 1 year manufacturer warranty

User questions & answers

Question:	i actually have 2 questions. Can this lift a ford explorer and can the long neck be removed
Answer:	The height is 9 1/4"+ a fraction. If you want to say 9 3/8" to be on the safe side you should be good.
Question:	Is there a longer neck I can buy for it
Answer:	Home Depot's website says 10-1/8 to 16-3/8 in.
Question:	Made in USA
Answer:	Home Depot's website says 10-1/8 to 16-3/8 in.
Question:	With long neck attached, and jack all the way down, what is the height
Answer:	Walmart's website says the non-double pin version is made in China so I assume this version is too.

Product features

Torin BIG RED Hydraulic Trolley Service/Floor Jack with Extra Saddle (Fits: SUVs and Extended Height Trucks): 3 Ton (6,000 lb) Capacity, Red

Product description

This heavy duty 3 Ton car jack gets vehicles almost two feet off the ground. Extra-low profile reaches under most show cars. Dual piston Rapid Pump technology lifts most work loads in just 3-1/2 pumps.

• Super-tough precision welded construction with an industrial grade finish
• Industrial quality for professional mechanics and hardcore automotive enthusiasts
• Rapid Pump exclusive dual parallel pump system lifts with far fewer pumps
• Universal joint release provides precise load control in any handle position
• Extra-wide steel casters for stability

User questions & answers

Question:	Is this jack suitable to lift my motor to replace freeze plugs under the motor mounts
Answer:	The jack dose not stay up
Question:	What is the diameter of the saddle? Looking to get a rubber pad and need to know the size
Answer:	Outside diameter of the saddle pad is 4 1/4" .... There is a shoulder ( approximately 1/4" or more) to consider and inside diameter of it is 3 5/8" ... If I were putting a rubber pad on mine, I would stick with a 3 1/2" diameter... Another option, to maintain full pad diameter, would be to go with a 4 1/2" rubber pad and machine a surface just for that shoulder and the 4 dog ears that stand even a little taller. Good luck...
Question:	What is the maximum height when fully extended? In inches please. Thanks
Answer:	Maximum Lift Height (in.) 19-3/4 in.
Question:	Do i need to also purchase jack stands or will this do the job on its own
Answer:	YES. An automotive floor jack serves ONE PURPOSE: to elevate a vehicle TEMPORARILY to permit clearance for one or more floor jacks to support the vehicle. This floor jack does not come with stands. You must purchase a pair of floor jacks separately. Do not use this or any automotive floor jack to support a vehicle.

• Dimensions: 9.75"L x 9.75"W x 12.25"H. Patented design combines jack stand and bottle jack in one unit
• Safety bar locks unit at desired height. This jack is for trucks and off road type vehicles
• Portable jack designed to safely Lift and hold both Regular and unibody cars and trucks
• Highly durable. Wide steel base for stability under load. Height range is 11 inch to 21 inch, but its default lift range is 11 to 17.25 inch, it can be raised to 21 inch if adjusted manually
• Strong safety bar keeps jack from lowering once it has been raised to maximum height

User questions & answers

Question:	I lost the jack arm, how can i get a replacement
Answer:	I purchased the jack to jack up my utility trailer. Tractor Supply used to carry this jack, they no longer carry it., so I went on line & Found that Powerbuilt is the manufacturer.... Google them, & send them a note, about needing the jack arm.
Question:	How do you release the safety latch? Help
Answer:	Raise the jack, lift the latch while lowering the jack.
Question:	What is the exact measurement of this jack? For storage purpose
Answer:	I measured it in half light so do not bet the farm on the answer but it should be close. The base is 9"X9" and it is nearly 13" tall. That will get you close.
Question:	I see a lot of bad reviews on quality, does anyone know if they are better built now? Has there been a quality control or design improvement
Answer:	You must be working for a company that does not make or represent the Powerbuilt name. By your question about quality, you are going off of rumors and gossip.I have been in the very dangerous employment of glazing, sandblasting, industrial coating, waterproofing, painting, industrial and commercial building repair, and skyscraper window washing. Safety and quality of tools for myself and my crew is my first concern. I actually was a consultant for Landa Pressure Washers,and many Industrial Chemical Companies like Shermiin Williams and Miller Paint. Many things can go wrong when you'r 80 feet up on a crane at the shipyards,or sandblasting, testing , and coating a Bridge in Portland Oregon, or just fixing your truck or car. Powerbuilt tools, and especially this #640912 keeps me verysafe, better than a car jack alone or a jack stand alone. Look up what the Fire Departments and first responders use at your local Safety Equipment Supplier.Look up the Fisk Descender, a safety device made by my previous employer and inventor, Brian Fisk. We used this safety device to descend from buildings andCranes, and Holding Tanks at the Refineries. I pressure washed 8 to 10 story buildings hanging to prep them for coating or waterproofing or caulking. When I needthe safest support product I know to crawl under and work on a heavy machine or vehicle or industrial motor at Frito Lay or a support beam at Robinson Dairy, you'llsee this Powerbuilt 640912 keeping me safe. Now that I am retired from the Industrial world, I will continue to stand by and consult and train people with manyother Powerbuilt products.

Product features

Powerbuilt 3 Ton All-in-One Jackstand/Bottle Jack

The Powerbuilt 3 Ton All-in-One UniJack is designed to safely lift and hold both regular and unibody cars and trucks.

All Unibody vehicles have factory-approved lifting points to prevent damage when jacking up the vehicle. But with a conventional jack, it’s challenging to properly lift and hold a unibody vehicle, because once the vehicle is raised with a jack, there’s no space left to add a jackstand.

The Powerbuilt 3 Ton All-in-One solves this problem with an ingenious design that both safely lifts and securely holds a Unibody vehicle using a single lift point. The Unijack offers both concave and flat lifting surfaces to accommodate a wide variety of lift points.

What’s more, it eliminates the cost and hassle of a floor jack, it’s easier to lift, move and store and costs a lot less too.

The 6000 pound All-in-One offers lift range from 11 to 21 inches, which makes it perfect for trucks, SUVs and vans.

• 3 inch Low profile for easy placement under lowered vehicles
• Dual pump system lifts saves efforts and pumps
• Two piece knurled steel handle for a sure grip, equipped w/ foam bumper to prevent damage to vehicle
• Strengthened rubber pad for better protection and friction

User questions & answers

Question:	Is this jack made in the USA
Answer:	Are you kidding at this price. It is made in communist china. High quality USA made unit will cost about 425 and up, BUT they will last FOREVER.
Question:	Does this jack really take 15 pump to reach full height
Answer:	Tried mine with no load on it and full strokes and it reaches full height in 8 pumps.
Question:	Are the wheels plastic
Answer:	Yes they are. I really like this..... would purchase it again.
Question:	Is this the same Liftmaster that makes garage door openers, etc? I'm guessing not, but just curious
Answer:	No it is not. The Amazon page is linked to the wrong manufacturer. I called the garage door company and they confirmed they have no connection to floor jacks.

Product features

3" Ultra Low Profile fits lowered chassises

3" Ultra Low entry point of the lifting pad can go under almost any road legal cars.

20" High Lifts ideal for SUVs and elevated chassises

20" Max lifting tights can raise big SUVs or those with elevated chassis.

Dual Pumps for effortless strokes

Dual pump quick-lift hydraulic system for a quick and easy lift up.

Product description

This is a necessary car repair tool whenever faced with a roadside emergency,such as changing tires and checking the bottom of the car

Suitable for sedans,SUV under 3 Ton

Farewell to laborious and tedious manual dismounting

Simple operation, strong practicability and high safety factor

Avoid potential risks that may occur in traditional tire replacingr



3 Ton:

Car Jack Box Includes

electric jack : 1pcs

plastic tool box: 1pcs

battery clamp connecting cable 1pcs

3.5MPower cable:1pcs

fuse 3pcs

crank handle:1 pcs

steel saddle:2pc

instruction manual:1pcs



Specifications

Lifting Range: 12-37cm/17-42cm

Rated Load Capacity: 3T

Control Method: Wire

Voltage: DC 12V or Vehicle battery power supply

Rated Current: 10A

Output Power: 120W OC Protection: 15A



Attention:

1.Absolutely do not go over the stated limits and restrictions. This product is only applicable to small and medium vehicles (within 3T), the lifting of larger ones beyond 3 tons is not supported. The manufacturer is not responsible for incorrect use.

2. Electric car jack must be used on flat ground.

3. To ensure sufficient electricity, it is better to start the vehicle before the actual operation.

4. When the electric car jack is working, please do not get too close to the car and use a finger to touch it to avoid any personal injury.

5. In the lifting process of the electric car jack, if it suddenly stops working, you can insert the hand crank into the hole of the gear case cover backside and rotate it in an anticlockwise direction to decline. (Prohibit the use of hand crank to lift up).

6. Please pay attention to the battery plus and minus, when the battery clip is connected to the car battery (dc 12v), do not reverse the position.

• 【Higher Stability and Safety】Our electric jack flat wtit tooth design,has a heavy-duty thickening steel plate,whole anti-oxidation painting body,which is anti-rust, wear-resistant.Large base for larger contact suface and compact triangle design for extra stability,reinforced solid screw rod makes the electric car jack will not easily be torn apart or twisted.It will automatically stop working when it reaches the height limitation (42 cm)
• 【Perfect for Sedan & SUV】2 removable raised heads are respectively designed for Sedan and SUV. Vehicles under 3 ton can be easily lifted, but DO NOT use it on the trucks and those beyond 3 ton.Two-way power supply(Battery clips with 12V DC outlet or car cigarette lighter) in case of failing to use when one of the power source is unstuck.Just push button controller with long enough line, plugs into car 12 volt power outlet
• 【Large Capacit&Built-in flashlight for Night Use】: 6600 lbs capacity, lifting height ranges from 4.7 inch to 16.53 inch (120mm-420mm). The convenient built-in flash LED light enables operation at night or in the dimmed light without any additional lighting tools.Besides it’s totally water-proof so you can use it even on rainy day.
• 【Simple Operation】Our scissor lift jack set is a necessary car repair tool whenever faced with a roadside emergency. It takes as short as 2 minutes to reach maximum height (42cm),change your tire with ease. Especially, including a newly developed jump starter,the car repair tool let you no more fighting with an old-fashioned hand jack or the dark of a night.Just power on the jump starter and touch a button for smooth lift.
• 【Professional Double-Purpose Tool Box】: All the electric jacks are equipped with a powerful, firm suitcase, which helps keeping the components and parts well organized, and conveniently fits in your vehicle.By the time, it can also act as a road sign when you stand it behind the car, just for fear of the unexpected accident.Please use our product in a plat ground.

User questions & answers

Question:	Will this 5-ton rated jack work to lift a 2014 Tesla Model S (4600 lbs) that has only 6” ground clearance and a 12v cigarette lighter outlet
Answer:	If you mean by "in the field" that you can use it wherever you need to I would say yes if you have 12V power available. The vehicle must be properly chocked so as not to shift position. This jack is not all that stout and will not take that much side load. Also, the manual crank did not work on mine.
Question:	how many inches of lift will this provide
Answer:	It's about 4.72 inches.
Question:	will it pick up my 2011 silverado 1500 WT long bed model
Answer:	Yes, the jack can lift more than 4000 lbs.
Question:	what size is the fuse. length and width
Answer:	This car jack lifting height range: 4.72-13.77 inches.

Product description

Case Iron Lift Arm and Pump Base for Durability and Strength

Hein-Werner HW93652 Hydraulic Service Jack is a 3 Ton service jack assembled in USA. It features cast iron lift arm and pump base to increase the strength. With flanged side plates and the wider frame, it provides the stability and strength under a load.

Hein-Werner HW93652 Service Jack features in - line pump assembly to assure long life and no off - center forces for ease in pumping, aligning and reduce wear.

At the same time, Hein-Werner HW93652 features U-Joint release mechanism for precise load control. With one piece handle, it eliminates bending, and making the lifting process with the ease.

In addition, it has the sealed hydraulic pump built in, which gives you the long lasting service.

- Assembled in the USA

- Cast Iron Lift Arm and Pump Base for strength and durability

- U-Joint for Precise Load Control; and Large Front Wheels and Rear Casters for Easy Maneuvering

- Flanged Side and Plates and Wide Frame for Stability

Specifications

- Capacity: 3 Ton

- Min Height: 5 inch; Max Height: 23-1/2 inch

- Lifting Height: 18-1/2 inch

- Saddle Diameter: 6-3/4 inch

- Handle Length: 50 inch

- Chassis Length: 31-1/2 inch

- Chassis Height: 7-1/4 inch

- Wheel to Wheel Width: 11-3/4 inch

- GW: 107 Lbs

Hein-Werner HW93652 is backed by 2 years warranty from the date of purchase

Click the buy button now to get your long lasting professional service jack

• Item may ship in more than one box and may arrive separately
• Made in the USA
• Cast iron lift arm and pump base for strength
• U-joint for precise load control
• Sealed hydraulic pump
• Flagged side plates and wide frame for stability; Pressure relief valve prevents overloading

User questions & answers

Question:	How many full pumps does it take to raise sadle to maximum height with and without weight on jack
Answer:	I don't know. Some of the pumps are small when pumping
Question:	What are the wheels made of? Steel or some sort of composite
Answer:	The larger load bearing wheels and the rear casters are steel or alloy. None appear composite.
Question:	How many full pumps does it take to raise jack to maximum height
Answer:	The Hein-Werner Professional Service Jack should take about 30 pumps to raise it completely.
Question:	is this made in the USA
Answer:	The sticker on top of the jack says "Assembled in the US from US and Global components". Probably as close to made in the USA as you can get these days.

• 【JACK CAPACITY-3.0T/6600LB】- Weight capacity of 3 ton (6600 lbs) and lifting height 12.5-37cm (5"-14.6") low saddle, 17-42cm (6.7"-16.5") high saddle. With a 12V vehicle power outlet. Powerful and time-saving toolset with Wireless Remote.
• 【EASY TO USE】- Simple operation, highly practical and high safety factor. Farewell to laborious and tedious manual dismounting.
• 【RUGGED CONSTRUCTION】- Made with premium materials and innovated technology, it is very durable and trustworthy.
• 【PORTABLE CASE】- Comes with a plastic storage case for easy transport and storage. The scissor jack comes with an impact wrench for tire replacing and an inflator pump.
• 【WIDELY USED】- Suitable for sedans, off-road vehicles, vans, light-duty trucks or any vehicle suits its capacity. It is also a favorable tool for garages, repair shops, and families.

User questions & answers

Question:	How much torg lbs does impact have
Answer:	Look at the hinge on the inside. They are at the bottom of the lid.
Question:	What is the shipping weight on this product
Answer:	Nope
Question:	Can i use for my rav
Answer:	I use it for the first time this week, and it work perfect i will give five star.
Question:	The air pump is for the car?? Cause it does not have enough pressure
Answer:	The image shows an adapter for the plug to clip to the battery. See images

Product features

Strong Performance

Weight capacity of 3 ton (6600 lbs) and lift range: 12.5-37cm (5"-14.6") low saddle, 17-42cm (6.7"-16.5") high saddle. With 12V vehicle power outlet. Powerful and time saving tool set with Wireless Remote.

Non-Slip Cross Recessed Ejector

This is solid and stable anti-slip ejector, free to adjust the height and starting height effortlessly, but also to stabilize the vehicle, ensure your safety and efficiency.

Easy to Use

One-button control. Simple operation, highly practical and high safety factor. Farewell to laborious and tedious manual dismounting.

Standard Accessory

With Inflator Pump, Tow Rope, Battery Clip, Wireless Remote, Multifunction Electric Hammer, Low Saddle, High Saddle, Suitcase and other accessories.

Carrying Case

Comes with a plastic storage case for easy transport and storage.

Wide Application

Suitable for sedans, off-road vehicles, vans, light-duty trucks or any vehicle suits its capacity. It is also a favorable tool for garages, repair shops, and families.

3 Ton Scissor Electric Jack

Electric scissor jack plus impact wrench set is able to work with car cigarette lighter power or car battery. By controlling lift switch, the mechanical part of the jack can be adjusted freely and smoothly, thus lifting car tires fast. Meanwhile, electric wrench can conveniently disassemble or fasten the fixing nut of different wheels and vehicles, only by a simple press of its start switch.