10 best disk repair tool

Product description

Specifications

Material: 304mirror stainless steel

Size: 55x19mm(manual measurement)

Applicable: Allwire and oil disc adjustment

 

Function

Adjust the positionof the brake clamp so that the disc and the brake pad are parallel andsymmetrical,and the disc is protected.

 

Package

2PCS BicycleDisc Brake Pad Adjusting Tool

• This is bicycle disc brake pad alignment tool.2PCS for one order.
• By this tool,it’s very easy to adjust the gap between the brake pad and brake rotor.
• Adjust the position of the brake clamp to prevent scratching the brake rotor.
• Elliptical shape,small but practical,and it fits closely with the disc.
• Per piece size: 55mm x 19mm/2.17" x 0.75" (Approx.)

User questions & answers

Question:	Are these for adjusting mechanical or hydraulic brakes
Answer:	No, but if you tip it too much water will drop out. It is a wonderful product, I would highly recommend it.
Question:	Any reason this wouldn’t work just the same for road bike rotors
Answer:	I have just been using tap water! So either one would work!
Question:	These dont slide in between my brake pads and rotor surface, as there is not much space there. How should I use these? Thank you
Answer:	It's hard plastic. And sharp at one of its corners. I haven't injured myself on any of the knives but gouged a hole on my knuckle with its holder while attempting to keep from doing so.
Question:	Is this just for mtb? Can it be used on road disc
Answer:	No, Each has it’s own sheath to protect.

Product description

Dog River Tools shrinker disc tool fits a standard 4 1/2" angled grinder that has a 5/8" - 11 spindle thread, and discs with 7/8" hole. It is good for shrinking; smoothing, blending and relieving surface tension and can be used on steel, stainless steel, aluminum and brass. Sheet metal tools help you save money and get professional auto body results every time.

Features:

Fits on standard ⅝” angled spindle grinder

Measures 4.5” diameter .055” (1.4mm) thick material

Made from 304 Stainless Steel

Can be used on steel, stainless steel, aluminum and brass

 

• The shrinking disc allows you to repair stretched or damaged metal panels with professional results
• Works by applying heat through friction, to shrink stretched sheet metal exactly where desired
• Fits on standard 4-1/2 inch angle grinder that have 5/8" - 11 spindle thread
• Made from 304 Stainless Steel, 4.5” diameter, .055” (1.4mm) thick material
• Works great on steel, stainless steel, aluminum and brass

User questions & answers

Question:	How to use shrinking disc
Answer:	The cord is long. I just measured it with a tape measure and it is about 95-97 inches long or 8 feet.
Question:	Does this come with the backing plate and nut
Answer:	No, just with a 120v.

Product description

This OEMTools Disc Brake Pad Spreader is perfect for compressing inner brake pads and resetting pistons for easy pad replacement! Also, this OEMTools Disc Brake Pad Spreader works great in tight areas where C-Clamps cannot! Constructed from high carbon steel and high quality chrome vanadium steel for strength durability and resistance to corrosion. Large Knob for Easy Turning

From the Manufacturer

This Disc Brake Pad Spreader is made with heavy duty construction and compresses the inner brake pad and resets the piston for easy pad placement. Features all steel construction and a large knob with a fine thread driver for easy tuning. Works in tight areas where C-clamps can't.

• IDEAL BRAKE COMPRESSION TOOL: This brake pads spreader and brake piston compressor tool is perfect for compressing inner brake pads and resetting pistons on domestic cars, as well as import cars and light trucks
• CONVENIENT BRAKE PRESS TOOL: Our brake pad tool works in tight areas where C-clamps cannot, making it a more convenient brake pad compressor; Piston spreader tool includes a large knob and a fine thread driver that are easy to turn
• DURABLE DESIGN: The disc brake pad spreader tool features a heavy-duty 2 piece design for added strength; Highly durable disc caliper tool that can handle any brake caliper compression job for years to come
• MADE FROM LONG-LASTING MATERIALS: This brake caliper tool is made from high carbon steel and chrome vanadium steel to resist corrosion; Sturdy brake caliper compression tool is built to last a lifetime
• FAST AND EASY: Our brake caliper press tool makes the job of compressing inner brake pads and resetting pistons for pad replacement much more efficient; This brake piston tool helps you replace brake pads in no time

User questions & answers

Question:	Will this work for a 2014 subaru wrx
Answer:	This ironing board unit is extremely heavy in comparison to comparable units of lighter gauge (weight). The best methodology is to ensure you have adequate “backing” within your wall cavities prior to installing. If you only use plastic/metal drywall anchors I guarantee the unit will pull from the wall...taking into account the products weight and imposed live loads from the act of ironing clothes. I suggest carefully cutting a drywall opening just enough to install horizontally a new 2x4 or 2x6 block (backing) between the existing 2x wall studs with utility knife. The drywall piece removed will be rectangle in shape and new blocking shall be installed flush with outer face of existing studs. Reinstall drywall piece and inject either sparkle or caulking around the edges (leaving a flush and clean look). You don’t have to fasten drywall with screws or nails, it only serves to fill the void. Install ironing board per the provided instructions into your existing wall studs and new blocking (backing). The ironing board mounting plate will conceal all the work performed installing the new blocking.
Question:	What are the dimensions of the knob
Answer:	The base has lines showing how much water you put in it. Also check your rice instructions and put x amount of water in the rice bin along with the rice.
Question:	How long is the manufacturer warranty
Answer:	At top brown button. Lift up
Question:	will this work on dual piston calipers
Answer:	It has a flip switch for 100-220v.

Product features

Oemtools 25265

Works in Tight Areas

Includes a Large Knob and Fine Thread Driver That are Easy to Turn.

For Use on Domestic and Import Cars and Light Trucks

Ideal for Compressing Inner Brake Pads and Resetting Pistons.

2 Piece Design for Added Strength

Made From High Carbon Steel and Chrome Vanadium Steel to Resist Corrosion.

• Ideal for 4 wheel drive cars/trucks
• Includes left and right handed thrust bolt assemblies
• The kit includes 18 adapters which fit a variety of modern car brands
• 24Pc kits rotates piston back into caliper for fitting of new brake shoes and pads
• Storage case and a pair of gloves included.

User questions & answers

Question:	Hi. Will this work on a 2007 volkswagen passat
Answer:	http://assets.rockler.com/media/catalog/product/cache/1/thumbnail/65x65/9df78eab33525d08d6e5fb8d27136e95/5/6/56868-02-1000.jpg
Question:	Will this work for vehicles that don't require the notches on the adapters? I.e. will this work to compress pistons without rotating
Answer:	Marc and I agree: 5 1/4". I'd allow 6". The unit goes straight up. When put into position, the ironing board swings. My wife really likes it.
Question:	work on a 2010 Jag XF and subaru 2015?? Thanks
Answer:	The board mounting bracket measures a little more than 12 3/4 inches which doesn't leave you much room for ironing. They'll fit and you'll be able to open the board straight down but you won't be able to swivel the board left or right. This is a well made product if you can use it.
Question:	Is it made in the us
Answer:	Mounting instructions: http://www.hafele.com/us/documents/ironfix_568.66.700.pdf

Product features

8MILELAKE Brake Caliper Wind Back Tool 24pcs Professional Disc Brake Caliper Tool Set

• IDEAL FOR MECHANICS: 24pcs pad and caliper wind back set to replace brake pads and rotate pistons back into the caliper.
• UNIVERSAL DESIGN: includes 19 adapters fitting hundreds of vehicle makes and models including American, European and Japanese. See Product Description below for some of the many compatible vehicles.
• IM INCLUDE: Each kit includes detailed use instructions with an illustrated parts diagram making operation a breeze.
• DURABLE: Designed for repeated use with high quality materials.
• BMC for easy storage and a pair of gloves.
• NOTE: The compatibility is NOT limited to specific models listed. Works with most vehicles from the brands below. Names after the dash are just a handful of specific older vehicles.

Specification:

0 Compatible for General Motors, Cadillac Seville, Eldorado

2 Compatible for Citroen XM, Xantia and other

3 Compatible for Alfa Romeo, Audi, Austin, BMW 318 iS, 320 i, 325 TD, 518 i, 525 i, 740 i, 850 ci, M5, Ford Fiesta, Honda Concerto, Jaguar XJ6, XJ40, Mercedes-Benz 190 , 200 , 300 , 420 , 560 , Mitsubishi Colt, Nissan Micra, Stanza, Sunny, Range Rover, Toyota Camry, VW Passat, Golf GTI, Volvo

4 Compatible for Alfa Romeo 164 2.0 , Fiat, Ford Telstar, Laser, General Motors Saturn, Grand Prix, Lumina, Honda Prelude, CRX, Mazda, Saab 9000 , Subaru

5 Compatible for with 3/8 inches square drive

6 Compatible for Nissan Primera, VW Golf 4

7 Compatible for Audi 80 and 90, V8 and 100 , Coupe, Ford Sierra ABS, Granada and Scorpio from 1985 , Honda Prelude, Nissan Silvia 1.8 Turbo, Blue Bird Primera 2.0 i, LS, GS, GSX, Rover 8000 , Saab 9000 , Subaru L and Z Peugeot 405 1 .9Gi, Gri, Sri, GTXI, MI16, 605 2.0 Sri, Toyota Celica, Corolla GT, MR2, VW Golf and Passat Cl, Gl, GT, GT 16V, 16V Corrado, Scirocco GTX 16V, Jetta Synchro , Jetta, GTI 16V

8 Compatible for GENERAL MOTORS

9 Compatible for General Motors, Cadillac Seville, Eldorado

10 Compatible for VW

A Compatible for Renault R21, Laguna

E Compatible for Cefrio Nissan, Maxima

F Compatible for Opel Corsa, Astra, Zafira and Vectra

Product description

Use the 12-piece Disc Brake Pad Kit to rotate pistons back into the caliper for pad clearance and prevent any damages. This kit is designed to be used on almost all makes of vehicles.

• [APPLICATION]: This tool set works to rotate the piston back into the caliper to enable proper fit for new brake pads on your vehicle during car repair and fits all domestic (Ford, Chevy, GMC, etc.), European (BMW, Mercedes, Audi, etc.), Japanese (Honda, Toyota, etc.) and Korean (Hyundai, KIA, etc.) cars.
• [VERSATILE]: This automotive repair kit comes with 10 different piston adapters that will fit and work on all types of vehicles for brake pad jobs at home or garage.
• [DESIGN]: The T-Handle tool has a thrust bolt and reaction plate to easily push the piston back into the caliper without causing any damage and is the right tool for any mechanic working on brakes.
• [QUALITY]: All of the CNC machined alloy steel parts are rust-resistant with a sand blasted finish to stand up to repeated use giving it long lasting life and use for years.
• [INCLUDES]: High impact heavy duty blow-molded case for convenient storage in your tool collection while staying organized on the job.

User questions & answers

Question:	made in USA or china
Answer:	I think so, as long as you have the plug adapter
Question:	I just
Answer:	At least 5 feet
Question:	will this work on my 2010 grand caravan and chevy impala
Answer:	Not sure exactly but it get the job done. I always Tkd when I travel an for some special Clothes at home.
Question:	Will this tool work on a 2006 mazda 3 rear brake caliper
Answer:	I bought as a gift, and never unraveled the cord, so not sure.

• EASY OPERATION: For brake pad and shoe replacement and rotating pistons back into the caliper on your car, truck or 4-wheel drive disc brake vehicle. Includes both right-handed and left-handed thrust bolt assemblies.
• UNIVERSAL COMPATIBILITY: This multi-disc brake caliper wind back tool kit includes 18 adapters fitting hundreds of vehicle makes and models including American, European, and Japanese. See the Product Description section below for a more complete list.
• HEAVY-DUTY DURABILITY: Carbon steel construction with a rust-proof blasted finish, these components will stand up to heavy use and accidental drops. It’s perfect for everyone from DIY novices to professional mechanics.
• CONVENIENT CARRY CASE: Includes an ABS carrying case with pre-sized slots for every component - right and left-handed thrust bolts, 2 retaining plates, and 18 disc adapters.
• TECHNICAL SUPPORT: Each kit includes a detailed user manual with an illustrated parts diagram. We pursue outstanding quality and professional technical support. If you are not satisfied with this product or if you have any questions, please let us know.

Product features

Universally Compatible with a Wide Range of Vehicles

NOTE: The compatibility is NOT limited to specific models listed. Works with most vehicles from the brands below. Names after the dash are just a handful of specific older vehicles.



Fitment:

• European Models
• Audi - (F), 80, 90, V8 100, Coupe E (R)
• Austin - Metro, 200 & 400 Series, Maestro, Montego (F),
• BMW - 318is, 320i, 325TD, 518i, 525i, 1x, 740i, 850ci, M5(F),
• Citroen - XM, Xantia (F/R), C5
• Fiat/Alfa Romeo (F) - 1642 (R)
• Jaguar - XJ6, XJ40 (F/R)
• Opel
• Peugeot - 405. 1.9Gi, Gro, Sri, Gtxi, MI, 2.0 Sri (R)
• Range Rover - 800
• Renault - R21, Laguna
• Saab - 9000 (R)
• Volvo (F)
• VW - Passat CL, GL, GT, Golf IV, GTI (F), Jetta, Synchro, Corrado, Scirroca, GTX

• American Models
• Ford - (F), AU & NZ, Fiesta, Telstar, Laser (R), Sierra, Grananda, Scorpio (R)
• General Motors - Cadillac Seville, El Dorado, Saturn, Grand Prix, Lumina (R)
• Jeep - Wrangler JK, TJ

• Japanese Models
• Honda - Concesto (F), Prelude, CRS, 16i,
• Mazda (R)
• Mitsubishi Colt (F)
• Nissan - Cefira, Micra, Stanza, Sunny (F), Bluebird, Silvia, Primera, Maxima
• Subaru - L, Z (R)
• Toyota - Camry (F), Celica, Corolla, GT, MR2 (R)

A Complete Brake Caliper Tool Set

You will get:

18 x Disc Adapters (#0, #2, #3, #4, #5, #6, #7, #8, #9, #10, #A, #E, #F, #K, #K1, #K2, #M, #N)

2 x Handed Thrust Bolt Assemblies (Left & Right)

2 x Retainer Plates (#O, #1)

1 x User Manual (Step by Step Operation Guide)

2 x Rubber Coated Gloves

The Long-Lasting Brake Caliper Tool

Our tool kit is constructed with ultra-strong carbon steel to endure years of heavy use and accidental drops - perfect for professional mechanics.

Instructions Included

We've included a detailed parts diagram and step by step instructions for a smooth piston wind-back process - even if you’re a DIY novice.

Afraid it might not be compatible with your vehicle?

No worries. Give it a try and if you realize you have one of the few vehicles that it doesn't fit, just let us know.

Product description

sanding Disc – 25 Piece Set of Heavy Duty and Durable 3 inches 24 Grit Sander - Automotive, Tools & Equipment, Body Repair Tool - By Katzco

Wanted to get your surface prep job done and have a clean finish? All you need is here!

Our Sanding Disc is made up of premium quality materials proven and tested for its durability and functionality.

It has a special Feature that allows an easy, quick and convenient disc change plus these will finish your job faster with its quick sanding feature.

Sanding discs come with 2 inch roll lock style holder.

Threaded backs screw securely onto the mandrel for convenient and quick disc changes.

This will be a great tool for wood working, ideal for surface prep and finish work, Also Quickly Removes Paint and Rust for Refinishing.

Use with any air or electric drill, die grinder, and other rotary tools for the utmost sanding control.

Discs will sand, grind, level and strip surfaces quickly and efficiently.

Remove rust and prep soft and hard woods, chip boards, fiber boards, non-ferrous metals, plastic, cork, rubber, and minerals.

This package includes 25 pieces of Heavy Duty and Durable Sander.

This is a 3 inch 24 Grit Sanding Disc.

Include this in your tools and equipments.

This will give great results to your work and will surely last longer!

What are you waiting for? Place your order now!

• WHAT YOU GET – 25 pieces of heavy duty and durable sander. This is a 3-inch 24 Grit Sanding Disc. Include this in your tools and equipment’s. This will give great results to your work and will surely last longer!
• ROLL LOCK STYLE- sanding discs come with 2-inch roll lock style holder. Threaded backs screw securely onto the mandrel for convenient and quick disc changes. This will be a great tool for wood working, ideal for surface prep and finish work, Also Quickly Removes Paint and Rust for Refinishing. Use with any air or electric drill, die grinder, and other rotary tools for the utmost sanding control.
• QUALITY MATERIALS –Our roll lock sanding disc is made up of premium quality materials proven and tested for its durability and functionality. It has a special Feature that allows an easy, quick and convenient disc change plus these will finish your job faster with its quick sanding feature.
• QUICK SANDING - discs will sand, grind, level and strip surfaces quickly and efficiently. Remove rust and prep soft and hard woods, chip boards, fiber boards, non-ferrous metals, plastic, cork, rubber, and minerals.
• SATISFACTION GUARANTEED – Be a confident buyer! Money back manufacturer’s warranty included when purchased from Katzco. You are protected with our 100% No Questions Asked Guarantee for either a replacement or refund. We care about only putting out high quality products that satisfies your needs. If there is anything you need that we don't offer, we go and find the best for you.

Product description

sanding Disc – 25 Piece Set of Heavy Duty and Durable 3 inches 60 Grits Sander - Automotive, Tools & Equipment, Body Repair Tool - By Katzco

Wanted to get your surface prep job done and have a clean finish? All you need is here!

Our Sanding Disc is made up of premium quality materials proven and tested for its durability and functionality.

It has a special Feature that allows an easy, quick and convenient disc change plus these will finish your job faster with its quick sanding feature.

Sanding discs come with 2 inch roll lock style holder.

Threaded backs screw securely onto the mandrel for convenient and quick disc changes.

This will be a great tool for wood working, ideal for surface prep and finish work, Also Quickly Removes Paint and Rust for Refinishing.

Use with any air or electric drill, die grinder, and other rotary tools for the utmost sanding control.

Discs will sand, grind, level and strip surfaces quickly and efficiently.

Remove rust and prep soft and hard woods, chip boards, fiber boards, non-ferrous metals, plastic, cork, rubber, and minerals.

This package includes 25 pieces of Heavy Duty and Durable Sander.

This is a 3 inch 60 Grit Sanding Disc.

Include this in your tools and equipments.

This will give great results to your work and will surely last longer!

What are you waiting for? Place your order now!

• WHAT YOU GET – 25 pieces of heavy duty and durable sander. This is a 3-inch 60 Grit Sanding Disc. Include this in your tools and equipment’s. This will give great results to your work and will surely last longer!
• ROLL LOCK STYLE- sanding discs come with 2-inch roll lock style holder. Threaded backs screw securely onto the mandrel for convenient and quick disc changes. This will be a great tool for wood working, ideal for surface prep and finish work, Also Quickly Removes Paint and Rust for Refinishing. Use with any air or electric drill, die grinder, and other rotary tools for the utmost sanding control.
• QUALITY MATERIALS –Our roll lock sanding disc is made up of premium quality materials proven and tested for its durability and functionality. It has a special Feature that allows an easy, quick and convenient disc change plus these will finish your job faster with its quick sanding feature.
• QUICK SANDING - discs will sand, grind, level and strip surfaces quickly and efficiently. Remove rust and prep soft and hard woods, chip boards, fiber boards, non-ferrous metals, plastic, cork, rubber, and minerals.
• SATISFACTION GUARANTEED – Be a confident buyer! Money back manufacturer’s warranty included when purchased from Katzco. You are protected with our 100% No Questions Asked Guarantee for either a replacement or refund. We care about only putting out high quality products that satisfies your needs. If there is anything you need that we don't offer, we go and find the best for you.

User questions & answers

Question:	Will this work on a 2014 Ford Escape front disk calipers
Answer:	Yes, the Micro ARC Reactor in the Chest has an LED light. Also the Eyes, Hands and Circular Figure Stand each have LED lights with individual battery compartments and hidden on/off switches inside the Figurine. The parts are movable and interchangeable with extra parts that come with the Figurine. Batteries installation and parts assembly should be done by an adult.
Question:	Will this work on a 2004 mustang gt
Answer:	Yes..The box comes sealed and taped.. Brand new..
Question:	Este producto me sirve para toyota camry
Answer:	Hi, yes, we still sell this figure
Question:	Will this tool work on the rear brakes of a 2012 ford explorer
Answer:	No it is not dual voltage

Product description

Description



Are you looking for a professional, yet affordable padlock tool? Are you in search of a sturdy, trustworthy tool that can do multiple work at once? If yes, look no further! Our professional padlock tool must meet your needs. It is one of the best choices for you.



Features

- Size: 11. 50X1. 30X1. 30cm/ 4. 52X0. 51X0. 51 inch.

- Color: Silver and blue.

- Material: Metal.

- Made of great quality material, durable and safe for long lasting use.

- This padlock tool is very easy to use, giving you a lot of convenience.

- The product is in a simple design, but very useful and practical.

- The perfect workmanship will give you an excellent use experience.

- The surface is polished so that it won' t hurt your hands, it' s very safe to use.



Package Including

2 x locksmith tools

• Made of great quality material, durable and safe for long lasting use.
• The perfect workmanship will give you an excellent use experience.
• The surface is polished so that it wont hurt your hands, its very safe to use.
• This padlock tool is very easy to use, giving you a lot of convenience.
• The product is in a simple design, but very useful and practical.

Product description

Specificationsl



Material: metal



Package size: approx. 21 * 12 * 5cm / 8.3 * 4.7 * 2inch



Package weight: approx. 690g / 24oz

• For using on disc brake calipers fitted to most European and Japanese Cars with right handed thread,
• Suitable for use on Alfa Romeo, Audi, Citroën, Fiat, Ford, Honda, Jaguar, Nissan, Peugeot, Renault, Rover, Saab, Seat, Subaru, Volkswagen, Volvo ,Ford, Mazda, Mitsubishi & Toyota
• An essential tool for the removal and installation of new brake pads
• Complete with reaction plate and reversible 3/8" drive dual pin head
• Quenched Chrome vanadium steel, harder, not easy to get deformed

User questions & answers

Question:	would this work for 2017 chevrolet equinox
Answer:	Yes, it is diecast.