11 best mighty accessories

Product description

Gate opening sensor, allows hands free exit from property, adjustable sensitivity range, magnetic sensor detects metal mass in motion, works in conjunction with all Mighty Mule accessories, compatible with Fm700 & Fm702 gate Openers only, simple do-it-yourself installation, includes 50' of direct Burial cable.

From the Manufacturer

Direct burial Gate Opening Sensor (also referred to as a Probe or Wand). Wires directly to the Gate Opener Control Box and senses mass metal in motion.This unit is recommended for use on the inside of the property for hands free exit by vehicles.It comes with a 50-Foot cable that should be trenched and placed next to your drive and buried no more than 12-Inches deep and no closer than 30-Feet from the gate. It will detect vehicles (cars, trucks, ATV's, motorcycles, etc.) as they cross over the 12-Foot magnetic field from the sensor and automatically open the gate as you exit.

• The 50 ft. Driveway Vehicle Sensor (FM138) allows a vehicle to drive past the sensor's 12 ft. magnetic field and will open your gate automatically, allowing guests the ability to exit without a Remote (FM135).
• Works with single and dual gates.
• Easy DIY (Do It Yourself) installation.
• Can be installed 3-50 ft. away from the gate.
• Also available are longer lengths including 100 ft. Vehicle Sensor (FM140) and 150 ft. Driveway Vehicle Sensor (FM141).
• Mighty Mule Wireless Driveway Vehicle Sensor (FM130) also available for wireless installation.
• Backed by a 12 month Mighty Mule Warranty and Technical Support.

User questions & answers

Question:	it's compatible with. aleko ac
Answer:	The light dose not come with it, you need to buy a blacklight!!! You can get one at Walmart for $10 or cheaper every else
Question:	Does it work with a solar only powered opener or does it need constant power
Answer:	I would say most are. The green, orange, yellow and pink definitely. The blue and purple are a little darker than what I would consider neon.
Question:	Anyone has a diagram to wire this thing
Answer:	Not waterproof.
Question:	This is the same sensor that comes with the wireless driveway alarm so why is it $60.00 more expensive
Answer:	Not waterproof.

Product description

EnviroCare Replacement Vacuum Bag Mighty Mite 3670 and 3680 Series Canisters Replaces part number 60295A and 60295B Traps Microscopic Particles and Allergens 99.7% Filtration. Universal, Eureka, Mighty Mite, designed to fit EUREKA by enviorcare, For Eureka.

Set Contains:

1 pack of cut level gloves size small

• EnviroCare Replacement Vacuum bags Designed to fit Eureka Mighty Mite 3670 and 3680 Series Canisters
• Replaces part number 60295A and 60295B
• Traps Microscopic Particles and Allergens
• 99.7% Micro Filtration

User questions & answers

Question:	Is this fit on sharp ec-tu
Answer:	No - if you go onto Amazon and enter in your vacuum model number you will find the bags. I found Ultra Light N vacuum bags that are probably what you need. Hope this helps.
Question:	eureka model 980 parts nr
Answer:	If your vacuum uses Y filter then yes. You should check the old filter inside vacuum to make sure or look inside manual.
Question:	where are these bags made (country of manufacture stated)? thanks
Answer:	I don't know about the mask. No fragrances, info says it has Allergen Filtration, traps 99% dust & pollens down to 5 microns.
Question:	My vacuum is 3670G.Does it fit
Answer:	These bags are exactly 6 3/8" wide X 16 3/4 tall.

Product description

The Digital Keypad is designed to control access to all Mighty Mule automatic gate openers. It can be programmed to use up to 25 different personal identification number (PIN) codes, and each code can be set up as a temporary or permanent security access code. Each code is face programmable with additional security features built in. This Digital Keypad can be easily installed wirelessly within 50 feet of your gate opener control box. Requires 3-AA batteries (not included).

From the Manufacturer

The Digital Keypad is designed to control access to all Mighty Mule automatic gate openers. Wireless requires 3-AA batteries, sold separately. Wired applications require 16-gauge, low voltage wire (RB509), sold separately.

• Wireless weatherproof keypad.
• Numeric keypad for controlled access with simple programming that can hold up to 25 access codes. Additionally, you can have temporary codes that can be programmed to expire within one to seven days.
• The Mighty Mule Digital Keypad is designed to work with all Mighty Mule Automatic Gate Openers; this is an ideal accessory for convenience and security.
• Easy DIY (Do It Yourself) programming for your Mighty Mule Automatic Gate Opener system.
• Backed by a 12 month Mighty Mule Warranty and Technical Support.

User questions & answers

Question:	Wha is the range of the remote? (how far from gate will it work
Answer:	The one I bought was 18 inches, not as long as the picture, about to the shoulder.
Question:	Can the fm137 - digital keypad be used with liftmaster gate openers? the lm gate opener is simply plastic junk
Answer:	I would say it is a thick texture that may be best for African American consumers. It may also work well for people who prefer thick soft, and course curls with heavy volume. You can always include the desired nationality and texture of hair in your search to obtain a diverse selection of hair textures and selections.
Question:	does this need a receiver to operate
Answer:	Of course! Which length do you need? Pls message me on amazon.
Question:	Do we need 2 keypads one for inside the gate and one for outside the gate. We have UPS deliveries and we want the driver to have access both ways
Answer:	Yes! Unprocessed human hair, more soft.

Product description

Recreate the action from the sonic video games. Articulated for ultimate pose ability! Includes a collectible accessory. Collect all the Sonic The Hedgehog 4" figures! Each sold separately. Suggested for ages 3+

• Recreate the action from the sonic video games
• Articulated for ultimate pose ability!
• Includes a collectible accessory
• Collect all the Sonic The Hedgehog 4" figures! Each sold separately
• Suggested for ages 3+

Product description

Push Button Control (FM132) for Mighty Mule Automatic Gate Opener

From the Manufacturer

The Mighty Mule Push Button Opener (FM132) is an affordable, convenient way to activate any Mighty Mule or GTO/PRO Automatic Gate Opener from up to 1000ft away. Can be installed indoors or outdoors. Wires directly to the gate opener control board with the use of low voltage wire, required (RB509 not included).

• Can be installed indoors or outdoors for convenient one touch access.
• Adds convenience by allowing homeowner to open the gate for guests, while still maintaining the security and safety that Mighty Mule Gates and Gate Openers provide.
• Simple and affordable alternative to multiple transmitters or a mounted keypad option.
• Easy DIY (Do It Yourself) installation for your Mighty Mule Automatic Gate Opener system.
• Backed by a 12 month Mighty Mule Warranty and Technical Support.

User questions & answers

Question:	Is it normally open or normally closed
Answer:	Same size and I love them! Great price!
Question:	Can I attach two push buttons controls to my control box? One for either side of the gate
Answer:	It’s on the longer side for an angled brush. However, you can always trim an angled brush to your liking. I’ve done it before with an other brush and it worked great.
Question:	I recieved this today. Where are the instructions for installation
Answer:	About 8 inches is the full length
Question:	Per comment above, can you really just get a doorbell and extra wire from big box store that would be compatible with the MM360? Thanks
Answer:	Hello , answer from lakeerie13 They are between 5-6" 2 of them are 5" inch 2 of them are 6" inch Thanks and God bless 🙏

Product description

Entry transmitter is standard equipment with Mighty Mule systems, has adjustable Codes, identical to unit included with the gate Openers, fits on visor of vehicles, battery included.

From the Manufacturer

An unlimited number of remotes can be added to your system by simply adjusting the code on the new Remote to match your existing gate system. Comes with a visor clip for placement in your vehicle or great for key chain use.

• The Single-Button Gate Opener Remote is a great accessory for a replacement or for an additional user to compliment your Mighty Mule Automatic Gate Opener.
• Easy DIY (Do It Yourself) programming for your Mighty Mule Automatic Gate system.
• Mighty Mule also offers the 2-button gate opener remote (FM134) and the 3-button remote (RB743) for easy use with a second Gate Operator or garage door. Garage door openers require the Universal Receiver (RB709U-NB).
• Backed by a 12 month Mighty Mule Warranty and Technical Support.
• NOTE: If the dip switch sequence is not matched up to the operator / other transmitter, the transmitter will not send the correct signal.

User questions & answers

Question:	Where can I get replacement batteries
Answer:	Honestly, I have had this for a couple of years and have not had to replace a battery yet. I see that A23 12 volt batteries are common - about $4 for a 2-pack at Home Depot, Walmart, Target, etc. There are many options on Amazon of course also.
Question:	Are these remotes in a watertight case? I need one for my 4-wheeler that will still work if it gets wet and muddy
Answer:	This does not look watertight. Its the typical small screw secured case with unsealed button. It's also a bit larger than I expected ~1.25 x 2 x .6", and has a visor clip.
Question:	Can I program this to my apartment complex gate myself? I want this as an alternative to my access card and gate code
Answer:	Hi, this remote is only compatible with Mighty Mule gate openers. We would suggest that you check to see which gate opener your apartment complex is using to ensure it is a Mighty Mule. But someone from your apartment complex will likely have to assist in setting this remote up, the remote is programmed using dip switches that must match the remote.
Question:	How does weather effect remote distance
Answer:	I find my remote works from farther away during the colder months. That’s not so much a remote issue as it is a receiver issue.

Product description

Enables control and monitoring of your Mighty Mule Smart Gate Opener from anywhere Check the status of your gate open or close it using the MMS100 and the Mighty Mule Smartphone app Can be used on gates installed up to 1/2 mile from your home

• Required accessory to control and monitor the MM371W MM372W MM571W or MM572W from anywhere using your smart device
• The Mighty Mule App can be used for controlling and monitoring both your Mighty Mule automatic gate operator as well as your Mighty Mule garage door operator to provide a complete perimeter access solution
• Mighty Mule App available at the Apple App Store or Google Play Store
• Easy to install plug in connect with your home router and gate control box to get started
• Backed by a 12 month Mighty Mule and Technical Support
• Note: This item is not intended for Solar Applications

User questions & answers

Question:	Will this work with the hd272 gate opener
Answer:	You need some electrical knowledge OR the circuit diagrams to determine this
Question:	will this notify me if someone opens my gate
Answer:	It works perfect as long as it is powered by a continuous 120v. To expand with answer, I would say it would work fine with solar as long as you have sufficient power reserved for evening and night time! The amperage is minimal, but the 120v is critical for monitoring the passing of metal masses (cars and bicycles).
Question:	Will this work with the SL2000 gate opener
Answer:	Hi, this product includes a installation manual in the box. If you need a copy before hand, please either visit MightyMule.com and go to Support
Question:	I'm in Hawaii - why can't this unit be shipped here
Answer:	I have the same question. I have the wireless driveway alarm which works great and only cost about $50, why are these gate opener sensors in the $150 range? I'd love to know if a driveway alarm can be used in this application.

Product features

How to make your 70 Series Mighty Mule Gate Operator Smart

The Mighty Mule MMS100 is a required accesory needed to make the new 70 Series Mighty Mule Gate Operators smart. Only the Medium and Heavy Duty models are smart capable with the addition of the MMS100 Smart Connectivity System. 1/2 mile (direct line of site) range makes the complete Mighty Mule system the perfect choice for your next generation perimeter access needs.

How to make your 70 Series Mighty Mule Gate Operator Smart

1/2 mile (direct line of site) range makes the complete Mighty Mule system the perfect choice for your next generation perimeter access needs.

How to make your 70 Series Mighty Mule Gate Operator Smart

Works with the Mighty Mule MM571W and MM572W HEAVY DUTY 70 series models.

How to make your 70 Series Mighty Mule Gate Operator Smart

Works with the Mighty Mule MM371W and MM372W MEDIUM DUTY 70 series models.

Product description

Mighty Mule gate keypad mounting post, decorative, Gooseneck, aluminum, Mighty Mule, suitable for use with: Mighty Mule Fm137 digital keypad and Fm136 wireless intercom, powder coated. Decorative " gooseneck" post for Mighty Mule keypad. Mount your digital keypad or wireless intercom/keypad on this attractive black, powder coated pedestal to allow easy " drive up" access from inside your vehicle. This modular in-ground design is easy to install.

From the Manufacturer

The Keypad Mounting Post is designed to mount the Mighty Mule and GTO/PRO Keypads and Intercom/Keypads, as well as other access control devices for your gate automation system. The mounting post is a rust-proof, extruded aluminum construction with a black anodized finish. The post can be surface-mounted or sunk into concrete. Its modular design makes it easy to install and the mounting post can be set to almost any height, depending on the slope of your driveway and the type of vehicle that will be passing through your gate. The Mighty Mule Keypad Mounting Post is a great addition to any property entrance.

• The Mighty Mule Keypad Mounting Post is ideal for gate entry and exit devices. Compatible with Mighty Mule Digital Keypad (FM137) or Mighty Mule Wireless Intercom (FM136).
• Easy DIY (Do It Yourself) installation to your Mighty Mule Automatic Gate Opener system.
• Sturdy powder coated aluminum design is weatherproof and made to withstand hot and cold temperatures.
• Backed by a 12 month Mighty Mule Warranty and Technical Support.

User questions & answers

Question:	What is the post height
Answer:	Yes. It works fine with iPhone 11 pro.
Question:	What's the distance of the four mounting holes on the mounting plate
Answer:	There are 5 pairs x Ear tips: XS/S/M/L/XL, 3 pairs x Ear Fins: S/M/L, 1x Cord Management Clip, 1 x Cord Shirt Clip, 1 x USB charging cable, 1 x Carrying Pouch and User Manual.
Question:	i need a gooseneck that has more of a reach
Answer:	I think the call quality is kinda bad.
Question:	Is this compatible with a keypad that requires 2 vertically aligned/centered screws spaced 5" apart
Answer:	If they are different weights, I can't tell. The good part is that by putting the battery in the earpieces, they don't have the effect where the battery pack pulls on one side. It's now evenly spread to both ears and I hardly notice the weight much.

Product description

Take your home perimeter security to the next level with the Mighty Mule MM136 wireless keypad/intercom system. Now, easily communicate and grant access to visitors without leaving the comfort of your favorite spot in your home.

• Allows the homeowner to speak and screen visitors from the safety of their home
• The wireless gate entry intercom system reaches a distance of up to 500-feet from gate opener's control box and provides Crystal clear communication
• The stand-alone keypad accepts up to 25 entry codes and is very easy to program. Additionally, temporary codes can be programmed to expire within one to seven days
• Gate entry system includes an indoor base station with a speaker and intercom/keypad
• Mighty Mule keypad mounting post () is recommended with the wireless intercom/keypad
• Backed by a 12 month Mighty Mule warranty and technical support

User questions & answers

Question:	Will mm136 work with a mighty mule
Answer:	Hi, Thank you for your attention for Wuloo wireless doorbell chime. No, this doorbell system uses FM wireless transmission technology without wifi. If you have any other questions, please feel free to contact us, we will solve the problem for you within 24 business hours. Have a nice day. Wuloo Customer Service Team
Question:	Why does the gate keep closing then instantly opens again ? It's been hooked up right! I was told this unit is and upgrade newer with more range
Answer:	Hi, Thank you for your attention for Wuloo wireless doorbell chime. Yes, 2 outdoor transmitters can communicate with each other as long as their code setting are the same. However, it have to press CALL button first to activate outdoor machines from sleep state, and then you can only communicate. If you have any other questions, please feel free to contact us, we are always happy to service for you. Have a nice day. Wuloo Customer Service Team
Question:	Can the mm136 be used with a chamberlain garage door opener remote or with "car 2 u" or "homelink" in car garage door openers
Answer:	Hi, Thank you for your attention for Wuloo intercom doorbell. Yes, there are 3 volume levels available, the highest volume will be loud enough to get your attention so that you don't miss any visitors. After clicking CALL button, the outdoor unit is activated and then it will send or get the information. But note that the outdoor unit will automatically go into sleep mode if no action is detected for 25 seconds, in this case, you need to activate it again by click CALL button if necessary. If you have other questions, please feel free to contact us, we are always happy to service for you. Have a nice day. Wuloo Customer Service Team
Question:	Will this work with a ghost controls gate opener
Answer:	can not be used as a monitor, because the unit will go into a "sleep" mode. You have to press the "talk" button to initiate the conversation. After approximately one minute of no activity, the unit will return to "sleep"mode.

Product description

"Mityvac is a brand of automotive diagnostic and service repair tools since 1971. Beginning with the design and patent of a single hand-held vacuum pump intended for medical applications, its uses broadened to include automotive diagnostics and service as well as industrial and consumer applications.

Mityvac fluid evacuators are ideal for removing fluids from small tanks and reservoirs. These units are lightweight and portable and include integrated reservoirs with capacities ranging from 1.9 qt. (1.8 l) to 2.3 gal. (8.8 l). Applications include evacuating engine oil, coolants, transaxle grease and power steering, transmission and brake fluid from automobiles, motorcycles, small engines, boat motors, RVs, ATVs and machinery.

The MV7300 operates on compressed air to create a powerful venturi vacuum for draining fluids from tanks and reservoirs. Compressed air hose attaches at base for stability. Includes accessories for draining engine oil or transmission fluid directly through the dipstick tubes. Also includes brake/clutch bleeding kit (Model MVA7205) for vacuum bleeding hydraulic brake and clutch systems.

Mityvac offers the products and systems you need for any brake and clutch bleeding application, air induction cleaning and compression testing, cooling system evacuation or refill application, for fluid handling and diagnostic applications."

• Includes brake/clutch bleeding kit (Model MVA7205) for vacuum bleeding hydraulic brake and clutch systems
• Integrated reservoir with large base with foot stabilizer
• Automatic overflow prevention with quick-drain pour spout
• Integrated 2.3-gallon capacity reservoir and includes accessories for draining engine oil or transmission fluid directly through the dipstick tubes
• Applications include evacuating engine oil, transaxle oil, coolants, power steering fluid, transmission and brake fluid

User questions & answers

Question:	Will this work on European cars? Preferable on oil removal of a 2006 Audi A4 with the 2.0T motor
Answer:	It should I use it with a 2013 Mercedes E 350. And it is not model specific. As Lind as the hose fits into dip stick tube it will work. The hose is made to fit in several different size tubes.
Question:	Will gas hurt this
Answer:	Yes it will damage the evacuator reservoir and turn the fittings gummy over time. We had two separate evacuators at my shop- one for oil and the old one my boss destroyed was only to be used for gas. It basically collapsed the tank. It didn’t leak, but looked horrible and it still worked fine. Also, I did not get blown up. Any mechanic will tell you, a customers fuel pump never goes out with a 1/4 tank of gas in the car. Usually, its full or 3/4 of the way full. 20-30 gallons in the tank makes removing the tank a little difficult without sucking some gas out first. Advice: buy two, or immediately transfer gas to a proper storage container and clean out the evacuator and fittings.
Question:	MB owner, synthetic oil: some reviews indicate the unit is not compatible with synthetic oils? Has the unit been upgraded/problem solved
Answer:	I have 2 Mercedes, both use Mobil 1 as called for and I use the Mityvac on both no problem.There are a few things you need to do so this works. 1) call Mityvac and ask for the longer tubes. I could not reach the bottom of my pan with the short tubes unless I lifted the Mityvac off the floor. AWKWARD!! They are in St Louis MO and are really nice. Explain the problem and they will take care of you.2) WARM UP YOUR CAR FIRST!!! a 3 minute trip around the block and your oil is warm enough to flow easily, but not too hot that it will burn you!3) remove the FILTER! cover hole with a rag, not stuff it in, cover to prevent debris from falling in. 4) PUMP 8-10x to get the oil moving. Empty 1/2 way up you will need the room! 8 quarts in my MBZ!5) drain and have patience it takes 5-8 minutes to get it all out.6) Wipe out filter and oil fill area, reassemble filter, pour new oil in filter housing,reinstall filter. I Usually put in 7 1/2 quarts, run for 3 min, let sit for 5 and check level/add oil as necessary. I hope this helps!
Question:	Has anyone used it to do a complete transmission flush,and if so how
Answer:	The idea of using Mityvac is to avoid mess. Yes I used it for complete flush, replaced 3.8 qt of fluid four times within 100 miles, fluid is bright pink even after 800 miles and not a single drop on the floor. Have patience, this thing will do the trick. Alternatively you can disconnect fluid outgoing line to trans, start the car wait for 1/4 of your tranny fluid to be collected, stop the car, replace the fluid with new, repeat 4 times and you are done, but there may be spills and you don't require a MityVac, it just does your job easy and clean. Pick your choice.

Product features

Additional Information

Vacuum is created quickly and efficiently by manual pump operation, offering superior mobility by eliminating the need for electricity or compressed air. The MV7400 is ideal for draining fluids from reservoirs on boats, RVs, ATVs, snowmobiles, farm equipment or motorcycles. Includes accessories for draining engine oil or transmission fluid directly through the dipstick tubes.

Mityvac offers the products and systems you need for any brake and clutch bleeding application, air induction cleaning and compression testing, cooling system evacuation or refill application, for fluid handling and diagnostic applications.