9 best powersports switches

Product description

Includes:Left Handlebar Switch Assembly ×1



Manufacturer Part # 4011835



Replacement Part # 4010591 4010560 2010340 4010592 4011385



Function Include

Switch Engine RUN OFF (can't push up for start)

Headlight HI LO OFF

Switch Speedo/Reverse Override



Fit for the following Polaris vehicles:

ATP 330 2004-2005

ATP 500 2004-2005

Magnum 325 2002

Magnum 330 2003-2006

Magnum 500 2002-2003

Scrambler 500 2002-2009

Scrambler 850 2015-2019

Scrambler XP 1000 2014-2018

Scrambler XP 850 2013-2015

Sportsman 400 2002-2005 2008 2010-2014

Sportsman 450 2006-2007 2016-2019

Sportsman 500 2002-2013

Sportsman 550 2010-2014

Sportsman 570 2014-2019

Sportsman 600 Twin 2003-2005

Sportsman 700 2002-2007

Sportsman 800 2005-2014

Sportsman 850 2010-2019

Sportsman ACE 2014

Sportsman ETX 2015

Sportsman MV7 2005

Sportsman SP 570 2015-2019

Sportsman SP 850 2015-2019

Sportsman WV850 2014

Sportsman X2 500 2006-2009

Sportsman X2 550 2010-2013

Sportsman X2 570 2015-2019

Sportsman X2 700 2008

Sportsman X2 800 2007-2009

Sportsman X2 850 2011

Sportsman XP 1000 2015-2019

Sportsman XP 550 2009

Sportsman XP 850 2009-2014

Trail Boss 325 2002

Trail Boss 330 2003-2009

Xpedition 325 2001-2002

Xpedition 425 2001-2002

Xplorer 400 2002

• Manufacturer Part # 4011835
• Replacement Part # 4010591 4010560 2010340 4010592 4011385
• Function Include Switch Engine RUN OFF (Can't Push Up for Start)
• Function Include Switch Headlight HI LO OFF and Switch Speedo/Reverse Override
• Service:Please check the fitment detail before you place an order.If there is any other question to confirm,please contact me to solve it.

• [Updated Waterproof] Works Great in Foggy or Rainy Day. 12V Universal switch, fits for handlebar in diameter: 22-23mm (7/8" inch), made of Thick Aluminium Alloy and Internal opper material
• This Handlebar Toggle ON/OFF Switch can be used ON 12V DC electrical system with spotlights, fog lights
• Wire Connection:Blue(connect to the equipment,positive). Black(positive)
• Output circuit protection, overload, reverse polarity and multiple protection, safety to use
• Widely Application: Fit on all 12V motorcycles, ATVS, UTVS, Bicycle, Dirt Bike, Scooters etc

Product features

12V Universal Fits

Standard rating: DC12V/10A;

fit on most of motorcycles, ATVs, scooters, or snowmobiles, popular used for U5 headlights

Universal 7/8" handlebar

Wire Connection:Blue(connect to the equipment,positive). Black(positive)

Waterproof IP68

Output circuit protection, overload, reverse polarity and multiple protection, safe to use. Works Great in Foggy or Rainy Day.

Updated Waterproof Handlebar Switch

Widely Application

Product description

100% Brand new.

Default Color: black(There are gold/red/black/blue/green/orange options).

Universal CNC Billet kill switch for ATV, motorcycles, scooters ,quard etc with 22mm handlebars .just confirm the mounting size as pictures before buying .

The housing is CNC machined from billet aluminum.

The kill button is sealed with a rubber boot around it, keeps out dirt, water, and moisture from the switch contacts.

Sold with bottom housing clamp plate,really upgrade from old design without it and you can install it wherever you wanna.

Notice: This switch is just for engine stop or engine start using.It is not both of kill and start using,you can install 2 sets if you need stop and kill.

• ✓ Universal CNC Billet kill switch for ATV,motorcycles,scooters ,quard etc with 22mm handlebars
• ✓ Two Wires avaliable to use for kill or stop of engine(only for kill or only for stop,not for both of them)
• ✓ The housing is CNC machined from billet aluminum,same color of top and bottom plate
• ✓ The kill button is sealed with rubber boot around it,keeps out dirt,water,and moisture from the switch contacts
• ✓ Sold with bottom housing clamp plate,really upgrade from old design without it and you can install it wherever you wanna

User questions & answers

Question:	can i purchase just the back plate
Answer:	Some sellers list the front switch half only, but I have not seen the back part sold separate. Contact a seller that lists the complete part and ask them.
Question:	Does it works for big foot scooter
Answer:	I don’t see why it won’t it’s designed the same way with a two stroke engine,just attach one wire to the ignition and one to ground and that about does it.
Question:	How long is the wire? Over 3.5 feet
Answer:	Mine was 22 inches.
Question:	Can these be used as a switch for fog lights on a mptorcycle? If not, which one can be used
Answer:	No, it's a momentary push-button switch like a horn button. Could use it as a momentary "flash-your-brights" switch, though, parallelled with your normal on-off switch. It has been done.

Product description

Application: suitable Compatible For Motorcycle Motorbike ATV Sport Dirt Electric Bike



Cable length: 60cm



Light Color: Red/Blue/Green



Size:As picture show



Feature:Waterproof



>>,Manual-return(latching action)ON-OFF button, can be use Compatible For general lights, hazard light, fog light, head light and power outlet Compatible For mobile devices



>>,Self-return(momentary action) button, can be use as horn, turn signal, enginee power, start kill switches.

Kaixinuo

• Item Type:Motorcycle Switches. 12v 10A
• Manual-return(latching action)ON-OFF button, can be use Compatible For general lights, hazard light, fog light, head light and power outlet Compatible For mobile devices
• Self-return(momentary action) button, can be use as horn, turn signal, enginee power, start kill switches.
• Waterproof design, suitable Compatible For rainy day
• Stainless steel + copper wires

Product description

Brand new, genuine Polaris Accessory Light Switch Assembly. This is a factory original equipment part, not aftermarket..

• SKU: 4014558
• Sold Each
• Please verify your own fitment

User questions & answers

Question:	do this have this for both side of the handle bar. Left & right side
Answer:	Yes You can send us a message after ordering Want a left and a right
Question:	Trying to wire this to neon lights, the switch has 3 wires ( blue,brown,black ) and the neon lights have ( red,black ) how do i wire
Answer:	Tie the brown wire to a hot source, 12VDC+, tie the blue wire to chassis ground, tie the black wire to the positive side of the lights, ground the 12VDC- side of the lights to chassis ground.
Question:	Does each button work independently? Meaning if I push the left button in and out I can control 1 light then the right button will control another
Answer:	The one I purchased only had one switch, With this unit it has two separate switches which would control two separate devices. Yes this should do what you want.
Question:	How many amps is this rated for
Answer:	I have no idea how many amps the switch is rated at. I plan to use these for horn switches in conjunction with a relay switch so amps are kept at a minimum .

Product description

                                             4 Wires Ignition Switch Key with Cap+ Left Handlebar Switch Assembly +A7TC Plug Spark

4 Wires Ignition Switch Key with Cap for 50cc 70cc 90cc 110cc 150cc 200cc 250cc TaoTao SUNL Chinese ATV 125cc Apollo Dirt Bike Scooter Parts

Universal Left Handlebar Switch Assembly fit for 50cc 70cc 90cc 110cc 125cc 150cc engine ATVs Dirt Bikes Go Karts Quad Bikes Pit Bikes Trail Bikes Off Road Motorcycle, 8 pin 2 male plug,3 function,handlebar grips size:7/8''(about 22mm)

A7TC Plug Spark for 50cc-125cc horizontal Engine ATV, Dirt Bikes & Go Karts, GY6 150CC ATV Go Karts and GY6 50CC, 125CC, 150CC Engine Scooters / Moped

100% brand new, high performance accessories.One week money back guaranteed if not satisfied

Packaging includes:  Left Switch Assembly * 1,1Pcs key ignition switch with 2Pcs keys，A7TC spark plug * 1.

Please compare this product with your stock keys,especially for the connector

• 4 Wires Ignition Switch Key with Cap for 50cc 70cc 90cc 110cc 125cc 150cc 200cc 250cc ATV Dirt Bike .
• Left starter Switch Assembly fits for 50cc 70cc 90cc 110cc 125cc 150cc engine ATVs Dirt Bikes Go Karts Quad Bikes Pit Bikes Trail Bikes Off Road Motorcycle. 8 pin 2 male plug,3 function,handlebar grips size:7/8''.
• Please compare this product with your stock keys,especially for the connector.
• Product introduction: Left Switch Assembly * 1,1Pcs key ignition switch with 2Pcs keys，A7TC spark plug * 1.
• 100% brand new, high performance accessories.One week money back guaranteed if not satisfied

• 4 Wires Ignition Switch Key with Cap for 50cc 70cc 90cc 110cc 125cc 150cc 200cc 250cc ATV Dirt Bike
• Left starter Switch Assembly fits for 50cc 70cc 90cc 110cc 125cc 150cc engine ATVs Dirt Bikes Go Karts Quad Bikes Pit Bikes Trail Bikes Off Road Motorcycle. 8 pin 2 male plug,3 function,handlebar grips size:7/8''(about 22mm)
• Please compare this product with your stock keys,especially for the connector
• Product introduction: Left Switch Assembly * 1,1Pcs key ignition switch with 2Pcs keys，A7TC spark plug * 1.
• 100% brand new, If you have any questions about the product, you can contact us. 3-year warranty.

Product features

OTOHANS AUTOMOTIVE Brand Key Ignition Switch+Left Switch Assembly+Spark Plug

• 100% Brand New, OTOHANS AUTOMOTIVE Brand Upgrade Accessories, Easy To Install And Ignition, Long-Term Durability.
• Packaging includes: Left Switch Assembly * 1,1Pcs key ignition switch with 2Pcs keys，A7TC spark plug * 1.
• Please confirm the model is compatible before purchasing.Please compare this product with your stock keys,especially for the connector

Compatible With:

Universal Left Handlebar Switch Assembly fit for 50cc 70cc 90cc 110cc 125cc 150cc engine ATVs Dirt Bikes Go Karts Quad Bikes Pit Bikes Trail Bikes Off Road Motorcycle, 8 pin 2 male plug,3 function,handlebar grips size:7/8''(about 22mm)

Compatible With:

4 Wires Ignition Switch Key with Cap for 50cc 70cc 90cc 110cc 150cc 200cc 250cc TaoTao SUNL Chinese ATV 125cc Apollo Dirt Bike Scooter Parts

Compatible With:

A7TC Plug Spark for 50cc-125cc horizontal Engine ATV, Dirt Bikes & Go Karts, GY6 150CC ATV Go Karts and GY6 50CC, 125CC, 150CC Engine Scooters / Moped

Service purposes

We will do our best to help you to solve it. And 90 Days Return goods Guarrantee! Lifetime maintenance Against Manufacturer Defect!

Product description

Manufacturer Part # 4110192



Package：Handlebar Switch Assembly × 1



Function:

1.Switch Engine Start

2.Switch Engine Run Stop

3.Switch Headlight High Low

4.Switch Override



Fit for following Polaris ATV



▶Sport 400L 1996-1998

1996 SPORT 400L-W968540

1997 SPORT 400L-W97BA38C

1998 SPORT 400L-W98BA38C



Trail Blazer 250 1996-1998

1996 TRAIL BLAZER 250 ES-W967827

1997 TRAIL BLAZER 250-W97BA25C

1998 TRAIL BLAZER 250-W98BA25C

• Manufacturer Part # 4110192
• Fitment: Polaris ATV ▶ Sport 400L 1996-1998 ▶ Trail Blazer 250 1996-1998
• Function:1.Switch Engine Start 2.Switch Engine Run Stop 3.Switch Headlight High Low 4.Switch Override
• Feature: OEM specifications with durable spring and reliable wire by rigorous testing.Exact connector , no need change harness, plug and play.
• Service:If there is any product problem within 1 year, please contact us to solve it for you.We provide product service.

Product description

Manufacturer Part#5TG-83973-09-00



Replacement Part# 5TG-83973-00-00



Package

Left Handlebar Switch ×1



Function:

Switch Start

Switch Engine Run Off

Switch Headlight Hi Lo Off



Left Handlebar Switch fit for the following Yamaha vehicle



▶YFZ450 2004-2005

2004 YFZ450 - YFZ450S

2004 YFZ450 LIMITED EDITION - YFZ450LES

2005 YFZ450 - YFZ450T

2005 YFZ450 SPECIAL EDITION - YFZ450SET

• Manufacturer Part # 5TG-83973-09-00 Replacement Part# 5TG-83973-00-00
• Fitment: ▶YFZ450 2004-2005
• Function: 1.Switch Start 2.Switch Engine Run Off 3.Switch Headlight Hi Lo Off
• Feature: OEM specifications by rigorous Testing，no need change harness, plug and play.
• Service:If there is any product problem within 1 year, please contact us to solve it for you.We provide product service.