13 best cheap dishwashers

Product description

Granite Countertop Dishwasher Installation Kit facilitates the installation of an undercounter dishwasher without the need to drill holes for mounting screws. It is approved for granite, quartz, acrylic and other solid surface countertops. Kit comes with 2 dishwasher brackets and hardware.



Installation Instructions

1. Fully clean the mounting area on the underside of the countertop using an alcohol-based solution.

2. Open the dishwasher door to expose the dishwasher mounting brackets.

3. Install the adhesive tabs supplied in the kit using the supplied set screw to each of the dishwasher mounting brackets.

4. Once installed to the dishwasher, peel back a corner of the red protective liner to make for easier removal once underneath the countertop.

5. With the adhesive tabs installed, position the dishwasher underneath the countertop to the correct depth, and left to right adjustment. Once the dishwasher is in position, completely remove the red liner.

6. Firmly hand press the adhesive tabs to the countertop and hold for a 30 second count. Then with a clamping aid, clamp the adhesive tabs in place for 5 minutes. Once 5 minutes has elapsed, the bond is set and will cure to its permanent bond in one hour.

• Fits most dishwashers
• Includes 2 dishwasher brackets and hardware
• Approved for granite, quartz, acrylic, and other solid surface counter tops
• Easy install no glue, no drill, and no mess

User questions & answers

Question:	What size are the screws? Mine showed up without the screws so i just wanna pick some up
Answer:	the adhesive on the bracket is strong enough to stick to stone granite or wood ,no screws needed. I warmed the surface with a hair dryer before install.
Question:	Are their 2 brackets in this kit
Answer:	Yes 2 brackets and 2 screws
Question:	does this come with the power cable for the garbagd disposal
Answer:	some of the set ,yes(you will see the picture on the box)..but this one is no
Question:	Can I use this to hardline a countertop dishwasher so I no longer have to hook it up through the faucet
Answer:	Yes.

• Universal Dishwasher Cutlery Basket fits Kenmore, Whirlpool, Bosch, Maytag, KitchenAid, Maytag, Samsung, GE, and more
• 7 compartments + 1 handle + 1 small lid (for one compartment only)
• Partial lid enables better cleaning as select cutlery items can stand further apart
• Product Dimensions: 9.5" x 5.4"x 4.8" (240mm x 140mm x 125mm) - Check Dimensions before Ordering !!!
• Easy to use, fits almost every dishwasher

User questions & answers

Question:	Will this fit my whirlpool model #du900pcdq6? it looks like it might be too tall with the handle
Answer:	Hmm... I don't believe I have ever seen dishwasher baskets made out of anything but sturdy plastic.I don't know if a restaurant supply store might have something in metal that might suit your needs. That's the only thing which comes to mind. Good luck!
Question:	Hi, will this fit ge model zbd1800 gss
Answer:	Approx 5 in high, 5.5 in wide and 9.5 in long. If you include the handle its 9.5 high. I could not find a proper fit (without spending $30+ dollars) so bought this and just pushed it down through the vertical wires that hold up the dishes, works perfectly!
Question:	Will this basket fit my whirlpool model # wdt970sahz
Answer:	yes. those fit for my dishwasher rail at the end.
Question:	I need a dishwasher silverware basket to fit ge adorba pot scrubber #ghdt108v00ww tv708685b which one fits it on amazaon
Answer:	Hello - yes, it does. It is not built for the Bosch, but it does fit. I even have a slim version and it fits. I put it in the bottom rack and can safely wash my stupidly expensive wineglasses!

Product features

Tired of your utensils falling through the holes of your dishwasher basket? We got you covered.

Product description

This high quality Genuine OEM GE Appliances Silverware Basket (WD28X10128) rests in the lower dishrack . The Grey Silverware Basket holds small utensils such as forks and knives during the dishwashing cycle. Please be aware that it is recommended to disconnect the appliance from all utilities prior to installation of the Silverware Basket.

From the Manufacturer

This is a Genuine Replacement Part,The Model Number and Name for The Following Item: General Electric (GENF0) WD28X10128 Dishwasher Silverware Basket.

• The GE Appliances WD28X10128 Silverware Basket is a genuine OEM (Original Equipment Manufacturer) part designed and engineered to exact specifications
• Replacement GE Appliances Dishwasher Silverware Basket in color of Grey
• GE Appliances WD28X10128 Dishwasher Silverware Basket holds small utensils such as forks and knives during the dishwashing cycle
• High quality GE Appliances OEM WD28X10128 Dishwasher Silverware Basket is manufactured with premium materials for durability and exact fit, be sure to follow instructions in owners manual when installing this part
• Repair your appliance with confidence when you choose Genuine GE Appliances Parts & Accessories

User questions & answers

Question:	Can you please confirm this fits in ge model cdwt980r30ss
Answer:	Unfortunately we do not have any adapters measuring in that size.
Question:	Are all the slots in the top cover the same size? Our current basket has slots of various sizes and most of our flatware does not fit
Answer:	Yes
Question:	Can someone please tell me the dimensions of this
Answer:	When I googled the Specs on your dishwasher's model number, it said 15/16" male end and 55/64" female end. The listed specs to this item fits.
Question:	Does this fix model GSD3360V00SS
Answer:	they have several sizes what ever threads onto your particular faucet head

Product features

Getting what you pay for...

We recommend using only genuine GE parts to repair your appliance. We engineer our appliances to precise specifications and subject them to rigorous testing.

More than Quality Parts...

At GE Appliances, our parts and filters are approved by third party regulators including Underwriters Laboratories, the National Sanitary Foundation, and the Uniform Plumbing Code. Partnering with these organizations is just one more way we strive to protect the integrity of our parts.

Reinvesting in American Manufacturing...

Behind every GE appliance is the work of thousands of dedicated Americans. From refrigerators to dishwashers, GE appliances are designed, engineered and hand-assembled with passion and care by thousands of employees in five U.S. locations.

A Better Future...

At GE Appliances, we’re not only dedicated to quality products and technologies, we’re also committed to being ambassadors of a better tomorrow for our neighbors, communities and environment.

Product description

Substitution : The manufacturer substituted part W10195360 with this new part WPW10463906

• This filter (part number WPW10463906) is for dishwashers
• Filter WPW10463906 removes food particles and debris from the water to prevent the drain from clogging
• Follow the instructions in the manual when installing this part
• Part # WPW10463906
• Replaces : W10463906, WPW10195360, W10195360, 2312301, PS11755148, AP6021820

Product description

Installation Directions

1.) Turn off power to your dishwasher in breaker box

(ABSOLUTELY CRITICAL TO AVOID SHOCK)

2.) Rotate lower access panel fasteners and remove them

3.) Remove access panel/sound dampening pad. Determine if the water supply

or power lines have enough slack to move the dishwasher. If not, you will need to

turn off water supply valve, disconnect water supply line from inlet valve & release

power line from junction box

4.) Open dishwasher door, remove the screws from the existing brackets (if present)

5.) You will next be moving the dishwasher. To do so, you may need to lower the

dishwasher by adjusting the leveling legs

6.) Carefully pull dishwasher a few inches away from the front of the cabinet

7.) Use pliers to pull up tabs in back of the bracket (if present). Pull out old brackets

8.) Insert new brackets. Use pliers to adjust the back tab to lock the brackets in place

9.) Slide the dishwasher back into the cabinet (readjusting the leveling legs, if necessary).

Replace the screws in your new brackets

10.) Reverse steps 3, 2 and 1.



This is a generic product manufactured and distributed by Impresa Products

This is not a Whirlpool, Sears, Kenmore, Amana, Jenn-Air, Crosley, Maytag

Roper, Magic Chef, Estate or Inglis OEM product and Impresa Products has no affiliation

with or endorsement from these brands. Our product is not covered under any

other manufacturer's warranty (except for Impresa Products). The Whirlpool,

Sears, Kenmore, Amana, Jenn-Air, Crosley, Maytag, Roper, Magic Chef,

brand names and logos are the registered trademarks of their owners.

Any use of the Whirlpool, Sears, Kenmore, Amana, Jenn-Air, Crosley, Maytag,

Roper, Magic Chef model or any other related

designations are made solely for purposes of description.

• IDEAL FIT FOR MANY MODELS: Our brackets are a perfect fit for an array of Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) models, among others
• COMPARABLE TO OEM PARTS: Our dishwasher mounting brackets / undercounter dishwasher brackets are made from high-quality galvanized steel and are durable, robust, and made to last
• VALUE PACK: 2-pack anti-tip bracket provides a solid product at an excellent value. Brackets measure approximately 3 inches long x 1 inch wide (at the widest)
• EASY TO INSTALL: Quick and easy to install - installation instructions below. Comparable to OEM 8269145 / WP8269145, as well as AP3039168, PS393134, 830941, AH393134 and EA393134
• IF YOU HAVE ANY QUESTIONS ABOUT WHETHER THIS WILL FIT YOUR EQUIPMENT, PLEASE CONTACT US THROUGH AMAZON OR ASK A QUESTION. Please note: This is an aftermarket part produced by Impresa Products meeting OEM quality (based on in-house testing)

User questions & answers

Question:	Looking for a bracket for lg model ldt 5678 st
Answer:	Yes but not in the nipple holder part on the top. They are larger than most nipples so they would need to go in the basket.
Question:	I have a lg dishwasher, model ldt5665st. would this work
Answer:	ABout .5”
Question:	Will this fit w10311122b model
Answer:	Yes. On mine, the entire back is a magnet. First, I tried sticking mine to the smaller, upper panel and it wouldn't hold at all. But, when placed on the larger, lower panel it was quite strong. Seems that a lot of the smaller panels aren't actually a ferrous metal. Try the lower panel first. Also, try putting it on the refrigerator or stove and see if it holds. That should tell you if the magnet is truly faulty. Also, I have seen others say that double-sided tape was a solution for them. Mine has been great so far. I hope this is helpful, good luck.
Question:	I have a whirlpool 810 or 811 series, very old, from 2000, will these brackets work to mount the newly installed quartz countertop
Answer:	Yes, you could use it on any dishwasher. The item comes with two double-sided stickers to use on non-magnetic dishwashers.

• ✅ MODEL NUMBER: 165314 Dishwasher Lower Rack Wheel - PACK OF 4.
• ✅ FIT MODELS: [Kenmore] - 63016302400, 63016302401, 63016302402, 63016302403, 63016302404, 63016302405, 63016302406, 63016303400, 63016303401, 63016303402, 63016303403, 63016303404, 63016303405, 63016303406, 63016304400, 63016304401, etc. [Bosch] - B1EIN1601B, B1ESN1601B, DW246UB, B1STA4319R, DW246UW, DW44ZB, DW44ZS, DW44ZSB, DW44ZW, GM926710UC, GM926710, S35KMK16UC, S35KMK16UC-47, S35KMK17UC, S35KMK17UC-18, S35KMK17UC-27, S35KMK17UC-36, etc.
• ✅ EASY TO INSTALL: It is made exactly fit for most top name brands (Bosch, Kenmore, Gaggenau, Thermador) and replaces part numbers: 00165314, 00420198, 420198, 423232, AH3439123, EA3439123, PS3439123, PS8697067.
• ✅ PREMIUM QUALITY: The replacement part is made from durable high-quality plastic and well-tested by the manufacturer - Meets OEM standards - Ensure long-lasting and effective performance.
• ✅ MONEY-BACK GUARANTEE: For any reason you're not completely satisfied, you can ask for a replacement or full refund, no questions asked.

Product features

165314 Dishwasher Lower Rack Wheel by BlueStars

The 165314 Dishwasher Lower Rack Wheel is designed for use on the lower rack of your dishwasher, it allows the rack to roll in and out of your appliance with ease. This roller wheel includes the locking clip required for installation. The roller wheel attaches directly to the rack, you simply snap it into place on the frame of the rack, it does not include the axel. Due to how the roller wheels wear out we recommend replacing them in pairs.

Perfect Fit

Compatible with the top name brands (Bosch, Kenmore, Gaggenau, Thermador) and replaces part numbers: 00165314, 00420198, 420198, 423232, AH3439123, EA3439123, PS3439123, PS8697067.

Premium Quality

The product is made of strong & durable materials that prevents cracking and failing during the installation and use process.

Saving Solution

Enjoy the great feeling when your dishwasher is repaired and works properly like before - BlueStars brings DIY solutions to help you deal with any trouble.

Repair Solutions Buy With Confidence Promise

BlueStars’ replacement parts are manufactured of high-quality and durable materials free from harmful chemicals. By doing numerously strict tests and reviews performed by our experienced engineers and development team, we commit all products to meet OEM standards and are safe to use.

We also support customers with a coverage on all products and 24/7 customer services which ensure you have a happy shopping experience. All is for us to build a relationship of confidence that you can count on.

• ✅【Compatible Models】 W10195417 Dishwasher Wheels Replaces Part Numbers of most popular dishwasher brands (kitchen aid,kenmore, whirlpool, jenn-air, maytag, amana, sears, roper, etc.) and compatible with PS11750057, WPW10195417, WPW10195417VP, PS2579553, AH2579553, EA2579553.
• ✅【Package Includes】 Package include 4 PC W10195417 Dishwasher Wheels Lower Rack for whirlpool,kenmore, kitchen aid dishwasher.
• ✅【Quality Assurance】 Dishwasher Wheels Replacement Parts is made from high-grade, heat-resistance, BPA free plastic ，High quality and durable， well-tested by the manufacturer.Not OEM but quality exceeds OEM requirements.
• ✅【Easy to Install 】 No tools required, just pull out the dishwasher and replace it. It only takes 3-5 minutes to easily solve your problem, save your time and mony.
• ✅【After sales Service】 Amazon's official warehouse logistics, convenient return service. If you have any questions during use, just write us an email, and we will give you a satisfactory response immediately.

User questions & answers

Question:	will these fit a Kenmore elite model 665.12773K
Answer:	I has 4 glass holders in the outside.
Question:	Will this work for kitchenaid model kdte104ess
Answer:	Yes it does, that's how I have mine. There is a gap in the front but I put large utensils upright there to drain, because they don't fit in the box and it give you more space in the drainer. (BTW I own this product I am not guessing an answer)
Question:	will these work for Kenmore Elite Model number 66514815N
Answer:	While the dish drainer could be placed any direction, I've set mine up so that the long dimension goes from the front of the sink to the back. 12-3/4 wide by 14-1/4 long by 5-1/4 inches high.
Question:	Do you have the dimensions you can send. I hear there are some that are 2 3/4" overall height and I need the 3" ' what size are these
Answer:	Yes, mine did rust. Looking for a similar product in plastic.

Product features

After sales service

The production process is strictly required, strictly inspected before leaving the factory. We have good after-sales service. If you have any questions during use, send us email directly . we will give you a satisfactory answer immediately.

User questions & answers

Question:	How many uses per container
Answer:	Not difficult at all. My husband loves this cigar case. He uses "cigar juice" in the humidor. We've given this as a gift also because the person saw my husband's and really liked it.
Question:	Where do you place the product
Answer:	They will last for a very long time if you us a humidor humidifier tube inside..
Question:	Would this help flush any detergent remenants from the pump on my washing machine
Answer:	it is ok for travel !
Question:	Are there any English instructions anywhere
Answer:	It isn’t cedar inside case!

Product description

Fits Following Models

Kenmore

58714000100 58714000101 58714000102 58714001990 58714001991 58714001992 58714001993 58714002990 58714002991 58714002992 58714002993 58714003100 58714008001 58714008002 58714008003 58714009100 58714009101 58714009102 58714012400 58714012401 58714012402 58714012403 58714012404 58714012405 58714012406A 58714012407A 58714012408A 58714013400 58714013401 58714013402 58714013403 58714013404 58714013405 58714013406 58714013407A 58714013408A 58714013409A 58714014400 58714014401 58714014402 58714014403 58714014404 58714014405 58714014406A 58714014407A 58714014408A 58714019400 58714019401 58714019402 58714019403 58714019404 58714019405 58714019406A 58714019407A 58714019408A 58714022200A 58714023200A 58714024200A 58714028200A 58714029200A 58714102800 58714112400 58714112401 58714112402 58714113400 58714113401 58714113402 58714114400 58714114401 58714114402 58714119400 58714119401 58714119402 58714131100 58714131101 58714131102 58714132100 58714132101 58714132102 58714134100 58714134101 58714134102 ect.



Kenmore

1031-005A 1032-005A 1041-002A 1071-003A 1081-000A 61-1014-00 61-1072-10 68-1075 68-1085 763 766 775 787 789 BADMODEL1 BF18P2 DW1085KW2 DW1100PW1 DW1800LW1 DW1800LW2 DW1800LW3 DW1800V1 DW1800Y0 DW1805KW1 DW1805KW4 DW2508A1 DW2508PW1 DW2508PW2 DW2558A1 DW2558PW1 DW2558PW2 DW3200PW1 DW3400PW1 DW4600PW1 DW5000A1 DW5100P*1 DW5100PW1 DW5200A1 DW5700PW1 DW5800PW1 DW5900PW1 DW6000AWW1 DW6250A1 DW6300AWW1 DW6500AWW1 DW9000AWW1 F71C12PHS1 F71C24RJB1 F71C44EJB0 F71C44EJS0 F71C663BB0 F71C663BD0 F71C663BS0 F71C765BB0 F71C765BS0 F71C765BT0 F71C885BB0 F71C885BS0 F71C885BT0 FBD2400KB0 FBD2400KB2A FBD2400KB3A FBD2400KB4A FBD2400KQ0 FBD2400KQ2A FBD2400KQ3A FBD2400KQ4A FBD2400KS0A FBD2400KS1A FBD2400KS2A FBD2400KW0 FBD2400KW2A FBD2400KW3A FBD2400KW4A ect.

• Package Includes: 4 x Wheels & Bracket Assembly.
• ✅[Ideal Replacement]: Want new 154174501 Frigidaire dishwasher rack wheels that matches the original? This replacement Wheels & Bracket Kit was specifically designed to look and function the same as the original Wheels & Bracket Assembly on your dishwasher. While this is NOT a original part, it is a direct replacement and it will appear, fit and work like the factory part.
• ✅[REPLACEMENT 154174501 Wheels & Bracket Assembly] - Dishwasher Wheel & Bracket Kit For Lower Dishrack. Includes 4 roller wheel and 4 axle clip.Dishrack roller 154174501 attaches to the dishrack and allows you to roll the dishrack in and out. Wear work gloves to protect your hands when installing this part. Direct replacement for a proper fit and easy installation, quality materials used, 100% tested before shipping.
• ✅【Compatible】: Designed to fit specific Frigidaire & Kenmore manufactured dishwasher models, also including Gibson Kelvinator Tappan White Westinghouse . Works with more models listed in Product description.You can send us Dishwasher models number, we can help you to confirm if it can work or not.
• ✅[Replaces Part Number]: 154174501, 154174401, 154174502, 154294801, 3202777, 612977, 5300809640, AH452448, AP2135554, EA452448, PS452448 EAP452448, this kit is a direct replacement for Wheels & Bracket on your dishwasher models.
• ✅[Buy with Confidence]: Order from KONDUONE, you can return or exchange within 3 months, true worry-free shopping experience. If the Wheels & Bracket Assembly ever fails on your Dishwasher simply contact us for a replacement.

User questions & answers

Question:	What is the wheel diameter
Answer:	1.5 inches
Question:	Will this fit fridgidare mdl # ffid2426ts
Answer:	I am not sure
Question:	Will this fit frigidaire gld2445rfco
Answer:	Yes
Question:	Will this fit frigidairie model number # gld2250rdc0 ? also, does this come with the bracket / clip to hold the wheels
Answer:	Yes this product does come with the bracket/ clip that holds the wheel on. From what I googles it should fit just fine, and I was very satisfied with this product.

Product description

The Eastman 6-foot dishwasher kit comes with everything you need for a fast and easy dishwasher installation. The supply line features a PVC core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304-Stainless Steel braided exterior that is designed to prevent kinking and crimping, corrosion-resistant. 3/8-inch compression x 3/8-inch compression connection. The kit comes with a 3-prong straight power cord, 3/8-inch male iron pipe elbow and a 3/4-inch female hose elbow. The supply line in this kit is lead-free compliant for potable water applications. UPC approved.

• The stainless steel water connector measures 6 feet in length and is equipped with 3/4 inch Comp connections
• Constructed of a heavy-duty PVC core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304-stainless steel braided exterior
• Designed with a working pressure of 125 PSI and a maximum pressure of 1500 PSI
• The working temperature is 15-degrees F to 158-degrees F
• The kit includes 6 ft stainless steel dishwasher supply line, 6 ft 3-prong straight power cord, 3/8 inch MIP elbow, 3/4 inch FHT elbow, wire nuts, teflon tape, stainless steel hose clamp, and romex connector

Product description

4 Pack W10195417 Dishwasher Wheels Lower Dish rack Wheel

Package Includes:

4 pack Dishwasher Wheels Lower Rack

What problems can the product solve:

1. Not washing properly

2. Dishrack will not pull out

3. Dishrack will not push in

Replacement Part Number:

PS11750057    WPW10195417    WPW10195417VP    PS2579553    AH2579553    EA2579553

Dear customers, the following models are only part of the replaceable product models. There are more not listed. 

Whirlpool: 

IUD7555DS1   IUD7555DS2   IUD7555DS3   IUD8555DX0   IUD8555DX1   IUD8555DX2   IUD8555DX3  IUD8010DS1 etc.

Kitchen aid:

KDFE104DBL0   KDTE104EWH1   KDFE104DBL1   KDTE204DBL1   KDFE104DBL2   KDTE204DSS1   KDFE104DBL3 etc.

Kenmore:

66513922K011   66514053K012   66513932K013   66513922K013   66514059K010   66513943K010   66513923K011 etc.

Jenn-air:

JDB9000CWB1   JDB9000CWB2   JDB9000CWB3   JDB9000CWP1   JDB9000CWP2   JDB9000CWP3   JDB9000CWS1 etc.

We provide one year free replacement and full refund service, if you have any questions, please contact us, we will definitely give you a satisfactory solution.

• 1. PERFECT COMPATIBILITY: The W10195417 Dishwasher Wheel replaces part is made exactly fit for most top name brands (whirlpool, kitchen aid, kenmore, jenn-air, maytag, amana, sears, roper) . It was tested carefully by our development team to ensure it replaces perfectly the originals. Dish rack replacement part number AP4538395 PS2579553 WPW10195417 AH2579553 EA2579553.
• 2. PERMIUM QUALITY: The replacement part is made of durable high quality BPA free plastic that is high-grade, heat-resistance and well-tested by the manufacturer. It is not original aftermarket part, but it fits OEM quality standards! Guaranteed to exceed OEM requirements!
• 3. Package Includes: Package includes 4 pcs upgraded W10195417 dishwasher wheel for whirlpool, kitchen aid and kenmore dishwasher.
• 4. SUPERIORITY: Easy to Install, just pull out the dishwasher and replace it, even no tools required. It only takes less than 5 minutes to easily solve your problem. Also, it can save your time and effort, and a large amount of maintenance costs.
• 5. GUARANTEE: We provide one year free replacement and full refund service, if you have any questions, please contact us, we will definitely give you a satisfactory solution.

User questions & answers

Question:	will these fit kitchenaid dishwasher BXW
Answer:	Says they will.. look pretty universal.. take one off and compare it to these..
Question:	What is the height from the bottom of the wheel to the top of the triangle? Picture in description is 2.83" / mine is approx 3.75" - Kitchenaid brand
Answer:	I measured it and it’s 3.75 on mine so it should fit. So super to install too
Question:	Will these work for kitchenaid model kdte104ess
Answer:	Not sure, it works on my KitchenAid, and it said they are universal.
Question:	Do these fit whirlpool model wdt730pahz
Answer:	Yes but the quality wasn’t as expected.

Product description

Part Information

Dishwasher Dishrack slide rail stop WPW10508950 （W10508950）-2 Pcs

High durable dishwasher parts - dishrack stop used in Whirlpool KitchenAid dishwashers.

Function: Prevents the upper dishrack from sliding completely off the slide rail.

Location: It 's located on each end of the rails.

Fits Kenmore Elite 665; Whirlpool 7GU, DU, GU, WDF WDT; Maytag MDB; KitchenAid KUDE, Amana ADB; Ikea IDF, IUD IUT

Fits Whirlpool: DU1245XTSB0,DU1245XTSQ0,DU1248XTSB0,DU1248XTSS0,ADB1400PYW2,ADB1400PYB2,ADB1400PYS2,ADB1400PYD2,GU2800XTVS3,GU2800XTVQ2,GU2800XTVQ3,GU2800XTVY2,GU2800XTVY3,GU2800XTVB3,GU2800XTVT3,GU2800XTVB2,GU2548XTPT0,GU3600XTVB1,GU3600XTVQ1,GU3600XTVY0,GU3600XTVB0,GU3600XTVQ0,GU2500XTPQ7,GU2500XTPB7,GU2500XTPT7,GU2500XTPS7,GU2600XTPQ6,GU2600XTPB0,GU3600XTRB0,GU3600XTRY0,GU3600XTRQ0,GU3600XTVS0,GU3600XTVT0,GU2700XTSY1,GU2700XTSS1,GU2700XTSB1,GU3600XTRB1,GU3600XTRY1,GU2700XTSQ1,GU2700XTST1,GU3600XTRQ1,GU2600XTPQ7,GU2600XTPB7,GU2600XTPT7,GU2600XTPS7,GU2700XTSQ0,GU3600XTSY1,IUD7500BS1,IUD7500BS0,IUD8500BX0 , etc Fits Maytag: MDB6709AWS2, MDB6709AWS3, MDB6709AWS4, MDB6709AWW0, MDB6709AWW1, MDB6709AWW2, MDB6709AWW3, MDB6709AWW4, MDB6769AWB0, MDB6769AWQ0, MDB6769AWS0, MDB6769AWW0, MDB7609AWB0,etc Fits Kenmore: 66513472K901, 66513472K902, 66513473K900, 66513473K901, 66513473K902, 66513479K900, 66513479K901, 66513479K902, 66513632K900, 66513632K901, 66513632K902, 66513632K903, 66513633K900, 66513633K901, 66513633K902, 66513633K903, 66513639K900, 66513639K901,etc Fits Ikea: IDF330PAGW0, IDT830SAGS0, IDT870SAGX0, IUD7500BS0, IUD7500BS1, IUD7500BS2, IUD7555DS0, IUD7555DS1, IUD7555DS2, IUD7555DS3, IUD8010DS0,etc Fits Amana: ADB1700ADB2, ADB1700ADB3, ADB1700ADB4, ADB1700ADS1, ADB1700ADS2, ADB1700ADS3, ADB1700ADS4,etc

• Model Number: W10508950 Dishwasher Stop, replaces W10199682 8562015 W10508950 2684662 AP6022472 PS11755805 ap6013365
• Fits Kenmore Elite 665 dishwasher rack stop; Whirlpool 7GU, DU, GU, WDF WDT; Maytag MDB; KitchenAid KUDE, Amana ADB; Ikea IDF, IUD IUT
• Fits whirlpool dishwasher rack stop: DU1245XTSB0,DU1245XTSQ0,DU1248XTSB0,DU1248XTSS0,ADB1400PYW2,ADB1400PYB2,7GU3600XTSY1,GU2548XTPQ3,GU2548XTPS3,GU2548XTPS1,GU2548XTPQ1,GU2800XTVS2,GU2800XTVS3,GU2800XTVQ2,GU2800XTVQ3,GU2800XTVY2,GU2800XTVY3,GU2800XTVB3,GU2800XTVT3,GU2800XTVB2,GU2548XTPS7,,WDT910SSYW1,WDT910SAYE2,WDT910SAYM2,WDT910SAYH2,WDT910SSYB2,WDT910SSYM2,WDT910SSYW2,GU3600XTVY3,GU3600XTVY2,GU3600XTVY4,GU3600XTVY1,IUD7500BS1,IUD7500BS0,IUD8500BX0, etc
• Dishwasher Dishrack slide rail stop WPW10508950 prevents the upper dishrack from sliding completely off the slide rail and it 's located on each end of the rails.
• If our dishwasher rack stop fail to deliver on what you expect of the dishwasher slide cap simply return it and we will issue full refund…no questions asked

User questions & answers

Question:	Is it a kenmore dishwasher rack stop
Answer:	Yes it works on Kenmore. The color is slightly darker so if that is important you should replace all of them
Question:	Would this work for model w10632082a
Answer:	Works great as a replacement part.
Question:	Will this fit model # wdt730pahz
Answer:	Dear friend, this dishwasher clip will fit your # wdt730pahz0, pls buy with confidence, thanks for your question!
Question:	Will the whirlpool dishwasher top rack parts work with my gu2548xtpq0 undercounter dishwasher well
Answer:	This worked for our undercounted dishwasher

• Dishwasher Parts Upper Rack : 6 Packs , Height 6.69 inch,Suitable for kitchen Aid,whirlpool,kenmore Lite kitchen aid Dishwasher parts top rack.w10350374,w10195840,kuds30ixss4,kuds30fxss5
• Package contains:W10350376 (2pcs) W10195839 (2pcs) W10195840 (2pcs) for kitchenaid whirlpool kenmore elite dishwasher part
• W10350376 Replaces Part Numbers: PS10064063, AP5956100, W10238418, W10253546, W10350376, W10712394VP, WPW10350376.
• W10195839 Replaces Part Numbers:WPW10195839, PS11750092. [W10195840 Replaces Part Numbers:1872228, AH3407016, EA3407016, PS3407016, WPW10195840, LP16233.
• Before installing, learn related tutorials on YouTube that will save you a lot of time.The replacement part is made from durable high quality material ,to match and/or exceed specifications of OEM product.Our products provide warranty and full refund services. If you encounter any problems in the use of the product, please contact us by email and we will definitely give you a satisfactory solution.

User questions & answers

Question:	Does this fit Kenmore
Answer:	Sorry, 665.15595792 is not compatible with our product
Question:	need to replace dishwasher top rack adjuster for w10502127a which number is compatible
Answer:	Dear customer, thank you for your inquiry, w10502127a model and our accessories are compatible, you can rest assured to buy
Question:	Will this fit model number 665.1278 or
Answer:	Dear customer, thank you for your inquiry, 665.1278 or 665.1277 is compatible with our accessories, you can buy with confidence
Question:	Will this work on Kenmore 665.12763k
Answer:	My model is either 665.1277 or 6651278 I'm guessing the difference is color.

Product features

Dishwasher Top Rack Parts

• It is made exactly fit for Kitchenaid Whirlpool Kenmore elite Dishwasher Top Rack Parts
• Needed to review a YouTube video first to avoid wasting time and possible breaking of parts during disassembly.
• When re installing the adjuster and cover, make sure the adjuster tabs near the top fit under the tines, otherwise the cover won't go on correctly/completely. If the cover is bowed when snapped home then the adjuster isn't seated properly

kenmore, kitchenAid , whirlpool ,maytag ,Dishwasher top rack parts

• W10350376 Replaces Part Numbers: PS10064063, AP5956100, W10238418, W10253546, W10350376, WPW10350376.
• Please measure the size of the original parts of the dishwasher before purchase to match our products.
• W10195839 Replaces Part Numbers:WPW10195839, PS11750092.
• W10195840 Replaces Part Numbers:1872228, AH3407016, EA3407016, PS3407016, WPW10195840, LP16233.