10 best rbw fifth wheel hitchs

Product description

The CURT A25 5th wheel hitch offers smoother, quieter towing for your home-away-from-home, combining the patented technology of our A-series, an easier mounting system and the power of a 25K 5th wheel hitch. Like our A16 and A20 hitches, this 25K 5th wheel hitch uses a patented cast yoke to allow for unimpeded head movement, while providing exceptional stability for the trailer. The yoke has a set of poly-torsion inserts to suppress shock loads and reduce excessive noise, and the head features high-strength, interlocking jaws to give the trailer stability and the freedom to pivot and swivel as needed. The A25 5th wheel hitch is also engineered for easier installation. The legs are equipped with two pins to properly align with the mounting holes, and they have easy-access mounting bolts for ergonomic tightening. The 5th wheel head also has a fast, one-pin removal system to make installation and removal from the truck bed easier. This 25K 5th wheel mounts to any industry-standard 5th wheel rails, using the 5th wheel legs or a CURT 5th wheel roller. It can also be mounted into the puck system of a truck equipped with the towing prep package, using our OEM puck system legs or roller adapters. Once installed, the A25 is fast and simple to operate. It features an extra-wide head opening to increase the coupling area for the trailer, and it has a lockable, single-throw handle that self-resets to the ready-to-couple position after uncoupling. To make coupling even easier, it is equipped with a coupling indicator that is visible from the truck cab. The indicator shows the status of the connection and eliminates the need for you to check multiple times while coupling. To protect the A25 5th wheel hitch against rust, wear and whatever other threats might impede your cross-country tour, it comes with a black carbide powder coat finish and a limited lifetime warranty. We also test the A25 for safety in accordance with SAE J2638 to ensure reliability for the road ahead.

• SELF-RESETTING. This A-series 5th wheel hitch features a unique, ergonomic handle and extra-wide head to make coupling your 5th wheel trailer easier than ever. After uncoupling, the handle self-resets to the ready-to-couple position
• FULL ARTICULATION. This 5th wheel hitch provides controlled towing of your 5th wheel camper with its patented head technology. The head is built on a cast yoke with poly-torsion inserts that reduce shock loads, chucking and noise at the coupling point
• COUPLING INDICATOR. Built into this 5th wheel hitch is a 3-position indicator that shows the coupling status. It conveniently shows if the 5th wheel hitch is coupled, uncoupled or ready to tow
• TESTED STRENGTH. This 5th wheel hitch is tested and rated for 25,000 lbs. gross trailer weight and 6,250 lbs. vertical load (limited to lowest-rated towing component). It is tested according to SAE J2638 specifications
• VERSATILE FIT. This 5th wheel hitch comes with standard legs to easily and securely mount onto any industry-standard 5th wheel base rails, such as CURT base rails #16104 and #16204 (base rails and brackets sold separately)

Product features

Smart operation

All A-series 5th wheel hitches operate with a lockable handle that self-resets to the ready-to-couple position after the 5th wheel is uncoupled, removing a step from the coupling process.

Easy setup

A-series 5th wheel hitches feature alignment pegs on the hitch legs, as well as easy-access mounting bolts for simple leg-to-body attachment (select models).

Simple installation

Each 5th wheel hitch is designed for fast, one-pin head removal to make removing the 5th wheel from the truck bed easier with smaller, lighter pieces.

Reliable connection

The A-series 5th wheel head is built with high-strength, interlocking jaws that greatly reduce chucking noises. The head also has an extra-wide opening for easy coupling.

Articulating head

The fully articulating torsion head of the A-series 5th wheel offers controlled coupling and stable, quiet towing with your 5th wheel trailer.

Quiet towing

A-series 5th wheel hitches also feature a cast yoke head with poly-torsion inserts. This mechanism suppresses shock loads and further reduces chucking noises from the trailer.

High-strength construction

The A25 and A30 5th wheel hitches are constructed with a cast steel main body, providing strength to tow the largest of 5th wheel trailers and offering a more precise build.

Thoroughly tested

CURT has a dedicated in-house testing and engineering facility in Detroit, MI to confirm that all of our 5th wheel hitches pass SAE J2638 specifications for safety.

How to select a 5th wheel hitch: What size is the truck bed?

Your truck bed length will determine the type of mounting platform you’ll need for your 5th wheel hitch: legs or a roller. 5th wheel legs are the standard option for mounting a 5th wheel hitch, but they will only fit in a long-bed truck. For short-bed trucks, extra clearance may be needed when making tight turns. A 5th wheel roller will allow the hitch to roll backward, providing enough clearance between the trailer overhang and the truck cab.

Does the truck have an OEM puck system?

If you own a truck from Chevrolet, Ford, GMC, Nissan or Ram, your truck bed may be equipped with a puck system (pictured). If your truck has a long bed with the puck system, select a CURT 5th wheel hitch with the appropriate OEM puck system legs. If your truck has a short bed with the puck system, select a CURT 5th wheel hitch with the appropriate OEM puck system roller or roller adapter.

Do you prefer permanent base rails?

If your truck does not have the OEM puck system, you will need to install 5th wheel rails. The traditional method for installing base rails is to use vehicle-specific under-bed brackets. First, select the custom under-bed brackets that fit your specific make and model, as well as a set of industry-standard base rails. Next, if you have a long-bed truck, select a 5th wheel hitch with legs. If you have a short-bed truck, select a 5th wheel hitch with a roller. Remember to always abide by the weight capacity of the lowest-rated towing component.

Would you like the option to easily remove the base rails?

Another 5th wheel mounting option is a gooseneck hitch. Using the CURT Double Lock EZr or Double Lock gooseneck and X5 adapter plate allows you to have a removable set of industry-standard 5th wheel base rails. First, select the Double Lock EZr gooseneck hitch kit that fits your specific make and model. Next, select the corresponding X5 adapter plate. Finally, if you have a long-bed truck, select a 5th wheel hitch with legs. If you have a short-bed truck, select a 5th wheel hitch with a roller.

Product description

Choosing the right trailer hitch can be a real challenge and having someone to guide you through that process can be a great help. We have access to thousands of hard-to-find parts available from leading manufacturers throughout the world.

• Built-in handles for safe, easy installation and removal
• Will not touch or scratch your vehicle
• 25,000 lbs. gross trailer weight, 6,250 lbs. pin weight capacity
• Uses the fast and secure Reese patented latching system
• Cannot be used with RBW Lil Rock'r models

User questions & answers

Question:	Will it fit 2017 ram 2500 with oem package
Answer:	Yes I have a 2017 3500 dew with factory puck system it works but you have to do a lot of adjustments to get it to lock down with no play and it is heavy I had to put it in and pull it out 10 times before it was adjusted correctly
Question:	Will this adapter work with andersen ultimate fifth wheel hitch
Answer:	Yes, It will Work. I have the Pro 20K mounted on mine.
Question:	will this fit 2017 ram 3500 factory with factory fifth wheel hitch
Answer:	The size of bolt they give which my kit had 1/2 “ bolts
Question:	Will this work with a Pro Series 15000, Part number
Answer:	Use the bottom mounting hole for better articulation and travel clearance

Product description

Choosing the right trailer hitch can be a real challenge and having someone to guide you through that process can be a great help. We have access to thousands of hard-to-find parts available from leading manufacturers throughout the world.

• Limited lifetime warranty
• 20,000 lbs gross trailer weight, 5,000 lbs pin weight capacity
• Works with most 15K, 16K or 20K standard fifth wheel hitches
• Uses the fast and secure Reese patented latching system
• Built-in handles for safe, easy installation and removal.Cannot be used with RBW Lil Rock'r models

Product description

Rails and installation kits for full-size trucks. Quick and easy installation with full truck bed access. For use on all fifth wheel hitches except Elite (formerly Signature Series).

• Rails and installation kit for full-size trucks
• Quick and easy installation
• 10-bolt design
• Included brackets and hardware
• May require additional kits, see application guide for complete fit specifications

User questions & answers

Question:	Is this considered rails and brackets that will fit the curt 16115 fifth wheel hitch
Answer:	Yes they will. That is the set-up that I have in my truck.
Question:	I dont need the rails i only need the brackets, bolts an spracers. Can u buy them in kit
Answer:	It will have left over hardware because of multi fit capacity. If I recall right it uses 10 for both bed rails. And eight for the four clips that bolt to frame. I welded my clips to the frame which saves time. My install was a 01 f250
Question:	Will the 20k Fifth wheel rails work for a 16k fifth wheel
Answer:	No, that does not come with this hitch.
Question:	DOES THIS KIT HAVE 16 BOLTS
Answer:	It will fit. You will need to buy a model specific bed rail kit.

Product description

Towever 85000 Fifth Wheel Base Rail Kit

• 【Description】 Install your fifth-wheel trailer hitch with this universal, 10-bolt kit. Rails, brackets and hardware are included. Rails mount on top of truck-bed floor.
• 【Application】Universal mounting brackets fit most applications,Compatible hitches: Curt, Draw-Tite, Hidden Hitch, Reese, Valley and Husky
• 【Feature】 Base rails provide necessary attachment points for 5th-wheel trailer hitches Multiple mounting holes for different frame sizes. Adapter brackets can be used to ease installation on certain vehicles.
• 【Heavy Duty】 For reliable weather resistance, this gooseneck hitch adapter is shielded in a durable black powder coat. This tough finish easily outlasts exposure to rain, snow, dirt . Package Includes Rails, brackets and hardware
• 【Notice】Package Includes Rails, brackets and hardware. Pls follow the installation instruction,

User questions & answers

Question:	Will it fit my 2002 chevy silverado 1500 Hd
Answer:	This is a standard rail kit and can fit hitches to 25K (Possibly Higher). I have a similar set on my Freightliner FL60 that I tow a 36' 5th wheel and a boat behind that. These should work fine for a 20K hitch with the pin tabs that drop through the plate.
Question:	Will this fit a 2020 k1500 Silverado with a 5.8 bed
Answer:	Not sure on that new of truck. Lots of holes in the brackets. How many do you want to drill in to your trucks frame? I would order truck specific.
Question:	What is the max capacity on the product? I'm looking for 20k lbs capacity
Answer:	Per the manufacturer website, the models that fit your vehicle are 16031 and 16033. You may want to contact them directly for further assistance.
Question:	Will these fit a 2021 3500 chev
Answer:	Rails & hardware not included. Just pins to fasten 5th wheel to rails. Rails were already installed on my truck when purchased.

Product description

B and W Companion 5th wheel hitch adapter part RVK3500 is considered by most experts to be the best 5th wheel hitch money can buy.

Engineered to eliminate sloppiness, the Companion series offers the smoothest ride on the road. The Companion attaches to your Turnoverball under-bed mounting system, which means you can pull a fifth-wheel or gooseneck hitch with the same system! Just like the Turnoverball, the Companion gives you easy install and removal without sacrificing sturdiness, reliability, or towing power.



Fully articulating head allows front to back and side to side pivoting.

Cam action latching handle for easy release, even when parked on unlevel sites.

No mounting rails means using your truck for more than towing.

Wide stance, engineered for improved stability and strength.

1" thick, wrap-around jaws fit kingpin perfectly, eliminating sloppy starts and stops.

Polyurethane bushings provide a quiet, rattle free towing experience.

20,000 lb GTW/5,000 lb VTW

Limited Lifetime Warranty



Product Weight: Base 131 lbs; Coupler 75 lbs

Footprint: 30.5" Wide x 36" Deep

Measurement: Center of hitch post to front edge (cab-side) of hitch: 14.5" (18.5" for alternative post position for select truck models)

Three vertical adjustments from 16.25" to 18.25"

4" of front to back adjustment with three coupler positions.

• Fully articulating head allows front to back and side to side pivoting.
• Cam action latching handle for easy release, even when parked on unlevel sites.
• Polyurethane bushings provide a quiet, rattle-free towing experience.
• Three vertical adjustments from 16.25" to 18.25", 4" of front to back adjustment with three coupler positions
• 20,000 lb GTW/5,000 lb VTW, Limited Lifetime Coverage

User questions & answers

Question:	Is this b&w 5th wheel hitch better than the reese goosebox gen2? i own a duramax with a 6.5ft standard bed
Answer:	No. Get the under bed gooseneck hitch / turn over ball specific to your truck. Not really hard to install it by yourself, does take a few hours or it did me. The companion / 5th wheel hitch slides into the hole in bed where the gooseneck ball would go. Release pin thru it and tighten the locking bolt to 60 ft lbs. Takes longer to lift it outta the bed of the trk than to get it ready to remove. Top plate comes off stand, then lift stand out. The stand is much heavier than the top plate but nothing one man can’t handle. Wouldn’t want to carry it very far but from the trk bed to the shop where I store it when not in use is no big deal. I have a plastic bed liner and had to cut strips in it for the frame feet strips to set in the bed corrugations. U don’t have to do that with spray in liner or no liner. I’m very happy with the easy and fast swap from a flat truck bed to gooseneck hitch or 5th wheel hitch & vice versa.
Question:	is this rated for 20,000 lbs towing capacity
Answer:	Your latch will drop back into place and you tighten the bolt, after you tighten the bolt double check you pull for the goose neck, it won't release because of the pressure put on it from tightening the bolt. After I pulled my fifth wheel couple times I double checked the bolt. good to go.
Question:	Does the under bed mounting system come with the hitch
Answer:	No. you will need to buy a rail kit. This is an above the rail hitch. The above kit is here: https://www.etrailer.com/Fifth-Wheel/Dodge/Ram+Pickup/2011/C16420-204.html?vehicleid=2011642656Good below hitch with rail kit is here:https://www.etrailer.com/5w-2011_Dodge_Ram+Pickup.htm?style=2500+Series,+8+Foot+Bed&furl=
Question:	So I pull the pin and remove the ball and this hitch just drops in and just tighten bolts and good to go
Answer:	Not sure where you got 52 pounds. That might be for just the head. Hitch is two pieces Base is heavy and I guess about eighty pounds for base. Two pieces together is well over 100 pounds. I always take my hitch out of truck when returning from trip and I use a rope hoist (7 to 1 ) ratio. Being 77 years old weight is too much to easily lift.

Product description

Designed to fit the Ford OEM hitch platform, this Companion hitch is known for its effortless installation and removal, thanks to a cam-actuated latching mechanism and simple two-piece design. Other features, like 1" thick cast-locking jaws, provide a strong connection and a smooth ride. It's everything you'd expect from our Companion series. 20,000 GTW/5,000 VTW Product Weight: Base 78; Coupler 75 Footprint: 33.5\" Wide x 16.5\" Deep Distance between puck holes: 30\" Wide x 13\" Deep Three vertical adjustments from 16.75\" to 18.75\" 2\" of front to back adjustment with three coupler positions.

• Fits 4 pucks in Ford truck bed, Fully articulating head allows front to back and side to side pivoting.
• Cam action latching handle for easy release, even when parked on unlevel sites.
• Polyurethane bushings provide a quiet, rattle-free towing experience.
• Three vertical adjustments from 16.75" to 18.75", 2" of front to back adjustment with three coupler positions
• 20,000 lb GTW/5,000 lb VTW - Limited Lifetime Coverage

User questions & answers

Question:	the 3300 in new ford setts too high adjusted all the way down and hitch pin up do they make shorter adjustment arms
Answer:	I have mine at the lowest setting,so I can use my sliding cover and I have about 5 inches above my bed, slider wouldn't help I think,just make sure with ur box, ur fifthwheel is high enough to clear the box..
Question:	what hitch and means of attachments do I need for my 2000 F350 ford long bed truck
Answer:	This is for Ford equipped with the factory puck system, and they did not make that in 2004, or you would have to buy the under bed mounting system. So no this will not work on your truck
Question:	I have a long bed f350 with a Weathergaurd Saddlebox 117 30" toolbox, will i need a slider to back the trailer or will it clear with the rigid hitch
Answer:	My answer is the same as the other folks. It comes with pins to hook it to the bed mounted rails which are purchased separately to fit your bed and style of attachment to that bed. Some bolt to the bed and others use factory mounted puck systems. It depends upon your individual truck and preference.
Question:	Will this work in a 2004 Ford F250 Super duty
Answer:	My truck had a Reese fifth wheel rated at 15,000. I unpinned and placed my 24,000 Curt right in the existing rails. No modifications.

Product description

The Eaz-Lift Gooseneck Stabilizer helps reduce movement on your horse trailer, gooseneck trailer or 5th wheel that has a gooseneck adapter installed. It hooks up to the gooseneck and adjusts in height from 30-44 inches. The Gooseneck Stabilizer features a heavy duty steel construction and is powder-coated for maximum rust protection. It also has durable zinc-plated chain and large footpads for added stability. Maximum load capacity 7500 lb.

• Helps reduce movement on trailer or 5th wheel with gooseneck adapter installed
• Heavy duty steel construction, powder-coated for maximum rust protection
• Durable zinc-plated chains and large footpads
• 7500 lb. weight capacity
• Adjustable from 30-44 inches

Product features

Eaz-Lift 48850 Heavy Duty Gooseneck Stabilizer

The Eaz-Lift Gooseneck Stabilizer helps reduce movement on your horse trailer, gooseneck trailer or 5th wheel that has a gooseneck adapter installed. It hooks up to the gooseneck and adjusts in height from 30-44 inches. The Gooseneck Stabilizer features a heavy duty steel construction and is powder-coated for maximum rust protection. It also has durable zinc-plated chain and large footpads for added stability. Maximum load capacity 7500 lb.

• Helps reduce movement on trailer or 5th wheel with gooseneck adapter installed
• Heavy duty steel construction, powder-coated for maximum rust protection
• Durable zinc-plated chains and large footpads
• 7500 lb. weight capacity
• Adjustable from 30-44 inches

Product description

The Companion Slider utilizes the BW Turnoverball under-bed mounting system (Sold Separately, does not work with all turnoverballs, check your fit). 12\" of movement, for turning and maneuvering clearance in shortbed trucks. Automatically latches in both directions- only get out of the truck once to move into maneuvering position. Three vertical adjustments, 17\", 18\", 19\". Fully articulating coupler head allows front to back and side to side pivoting.

• The Companion Slider utilizes the B&W Turnoverball under-bed mounting system (Sold Separately).
• 12" of movement, for turning and maneuvering clearance in shortbed trucks.
• Automatically latches in both directions- only get out of the truck once to move into maneuvering po
• Three vertical adjustments, 17", 18", 19".
• Fully articulating coupler head allows front to back and side to side pivoting.

User questions & answers

Question:	Will the companion slider with an existing non B&W turnoverball underbed system
Answer:	No it will only work for BW. Other sliders are available. Call Us!
Question:	What is the minimum distance forward of the turnover ball hole required to fit this in bed? F350 short bed with auxiliary fuel tank (top below bed rai
Answer:	The turnoverball needs to be installed exactly as the instructions say. And depending on what year f350 you have it will vary, best thing to do is go to b&w site and get the manual for your turnoverball that fits your truck and it will give you the measurement on where the ball needs to be installed.
Question:	Will this fit directly on a 2020 ford f-250 with puck system without any modification or purchasing of extra pieces
Answer:	Nope, this is designed to be used in a B&W gooseneck hitch.
Question:	What is a maximum weigh limit
Answer:	20,000 lbs total trailer weight and 5,000 lbs pin weight.

Product description

Adapts your Gooseneck hitch to tow your 5th-Wheel trailer. Poly cushions absorb shock for a smooth ride. Adjustable heights fit multiple applications. 20,000 GTW.

• Towing capacity: 20,000 lb.
• Pin weight capacity: 4,000 lbs.
• Reduces bounce and vibration
• Minimal wear and tear on both trailer and vehicle
• Durable cast-steel construction

User questions & answers

Question:	Do I need to drill holes for this product
Answer:	You need a gooseneck ball for this to work
Question:	Is there a lock available for this
Answer:	You don't mention what your towing but i have a 2008 GMC long bed. I tow a 35ft 5Th wheel and i have plenty of clearance. I use this adaptor and love it
Question:	I have a 3012 f350 with fiver tow prep package. One ad that I read stated this would not work with factory prep packages. Is that correct
Answer:	I used it on 2016 ram 3500. 2017 ram 2500 should be the same
Question:	I have a long bed 2012 F350 with ball directly over the axle. Do I need an offset for this gooseneck
Answer:	If your Andersen mounts on regular Reese in bed rails, it will fit this mount. Reese say this fits ALL standard 5th wheel units.