13 best wind turbines

• ★ Feature: Starting with low speed; high wind energy utilization; low vibration on operation, high efficiency.
• ★ Wind Blade: 23.4inch in length, made of nylon carbon fiber. The longer the blades are, the more kinetic energy they generate and the more power they produce. Nylon material waterproof, corrosion resistant, lightweight.
• ★ Generator: three-phase permanent magnet synchronous motor. Efficient and compact ac generator with high performance NdFeB permanent magnet. A fully integrated voltage regulator that automatically shuts down when the battery is fully charged. The wind generator is controlled by MPPT intelligent microprocessor, which can effectively adjust current and voltage
• ★Rotating Body: with yaw adjustment system, the wind direction position is automatically read and the rotor position is adjusted to capture the maximum wind energy. The tail fin is designed according to the aerodynamic principle.
• ★Real Parameter, Not False: Our product parameters are Real & Actual, not False. Base on designed after repeated experimental testing. Wind turbine parameters can be customized, please contact us if you have requirement.

User questions & answers

Question:	What is the rpm when generating 400w
Answer:	not sure but it takes around 32mph straight clean wind.
Question:	does my pikasola 400w wind turbine have to be welded for pole mount? or does it use nesting or reducing joint seen in some pictured
Answer:	it has a built in clamp feature with a rubber bushing. It fits on a 2" OD pipe. No need for welding.
Question:	My turbine doesn't put out anywhere near 400 watts at high winds. the most i've seen is 50-100 watts. all connections are solid too. any suggestions
Answer:	I'm in your position also. Disappointed.
Question:	What is the wire guage size
Answer:	The guage varies based on length. See their guide. I used 12. Additionally, if you are planning on their lantern type turbine.....I would note the number of poor scores from other folks. I wished I had seen the reviews before I purchased mine.

Product features

Specifications:

Rated power:400 W

Maximum power:410 W

Number of blades:3

Rated voltage:12 V

Start-up wind speed:2.5 m/s

Rated wind speed :13 m/s

Working speed:3-25 m/s

Survival wind speed:40 m/s

Wind wheel diameter: 51.18 inch

High efficiency

1.Three-phase permanent magnet synchronous motor. Efficient and compact ac generator with high performance NdFeB permanent magnet.

2. A fully integrated voltage regulator that automatically shuts down when the battery is fully charged.

3.The fan is controlled by MPPT intelligent microprocessor, which can effectively adjust current and voltage.

4.The unique magnetic circuit design makes the starting torque very small, which can effectively ensure the wind turbine's breeze starting ability.

High quality

1.The wind turbine is made entirely of high quality aluminum and stainless steel fittings. It is not only lightweight, small in size, but also compact in shape.

2.The blade material is made of high-strength plastic with 30% carbon fiber and anti-UV anti-corrosion material, which is both beautiful and durable.

3.The surface of the wind turbine is coated with a special process that provides excellent resistance to oxidation and corrosion under any harsh conditions, as well as excellent corrosion resistance, water resistance and sand resistance.

Easy installation

1． Nesting the black leather cushion inside the reducing joint of the wind turbine then putting the tower inside reducing joint. Connecting the cover of reducing joint by screws and fastening. Tightening the screws by hex key.

2． The three wires of the wind turbine are connected to the transmission cable, each pair of wires is not less than 30 mm, and the tape at the connection end is at 100 mm.

3． Connect the wind turbine's cable to the controller and the battery must be connected to the controller before wiring.

Feature:

1. Starting with low speed; high wind energy utilization; beautiful appearance; low vibration on operation.

2.Being installed by human design and easy for installation, maintenance and repair.

3.Being molded through precise injection with new process, together with the optimized design of aerodynamic contour and structure, our wind turbine blades have such advantages: high utilization of wind energy which contributes to the annual energy output.

4.Our generators, adopting patented permanent magnet rotor alternator, with a special kind of stater design, efficiently decrease resistance torque of the generators.

Product description

Specification:

Condition: New

Controller system: Electromagnetism

Started wind speed: 1.3 m/s

Cut-in wind speed: 2.5 m/s

Rated Wind Speed: 11 m/s

Max Wind Speed: ≤40 m/s

The instantaneous maximum wind speed≤45m/s

Blades quantity:2

Rotor Diameter of Blades: 0.54m

Speed regulation: The wind engle automatically

Color: White

Rated Voltage: 12 V DC

Rated Power: 400 W

Max Power: 450 W

Enerator protection grade: IP65

Work environment temperature: 25~+45℃

Over speed protection: Electromagnetic brake

Feature: Low vibration,Low start wind speed

Blade material: Glass fiber

Generator: Maglev generator

Design service life: 10~15 years

Installation Instructions: Not included



Note:

Installation Manual Is NOT Included

Professional Installation Is Highly Recommended



Package included:

1 x Vertical Wind Power Turbine Generator

1 x Charge Controller

1 x Ring Flange

4 x Screws

• ☀【 HIGH QUALITY BLADES 】The blade material is synthetically injection molded with high-strength FRP material. At the same time, the fashionable spiral blade is also designed with aerodynamics to make the rotor run smoothly, reliably and quietly. Coreless PMG provides lower start torque/wind speed and longer service life. Maximum RPM protection ( No higher than 300RPM, regardless of the wind speed ).
• ☀【 POWERFUL PERFORMANCE 】The vertical wind turbine adopts three-phase AC PMG, it boasts low torque, high-power tracking intelligent microprocessor that can effectively regulating the current and voltage. It obviously increases wind energy utilization and annual power generation.
• ☀【 COMPACT & FIXED 】With dual bearings, the fan movement is more stable. Low vibration and low noise. In addition, with its compact shape, it has the lowest starting wind speed and a larger windward area, enabling it to generate electricity at lower wind speeds.
• ☀【 EASY INSTALLATION 】All things you need for installation are included. You can also get extra installation tool (two wrenches). Humanized and convenient flange design, easy to install and maintain. It is ideally suited for boats, gazebos, cabins or mobile homes, as well as for green windmills, home, corporate and industrial energy supply.
• ☀【 BEST SERVICE 】100% Refund Guarantee, please be assured the purchase. Our products are sent from the US and can be delivered quickly. If you have any questions or quality issue,please feel free to contact us. NICE CHOOSE will do our best to help you solve the problem.

User questions & answers

Question:	How tall
Answer:	The blades alone are 34 1/2 inches tall. Turbine with blades mounted is 19 inches in diameter and approx 42 inches from top of center pole to bottom mounting disc
Question:	How loud is this turbine and how high up must it be mounted
Answer:	The speed of this Wind Turbine Generator is relatively stable and does not turn very fast, so there is basically no noise. The height of the fan pole depends on your installation environment. If there are obstacles around you installing the product, you should increase the height of the product until it is higher than the obstacle. In short, the product should be the largest area of contact with the wind resources, there will be no obstacles to block the wind.

• ★ Feature: Starting with 2.5m/s Low wind speed; Low vibration during working; High wind energy efficiency. Wind turbine kit suitable for boat, RV, cabin, home, etc.
• ★ Wind Blade: 23.8 inch in length, the longer blade will generate more power. The blades are made of Nylon carbon fiber which special on waterproof, corrosion resistant, lightweight.
• ★Wind Generator: Three-phase permanent magnet synchronous motor. Efficient and compact ac generator with high performance NdFeB permanent magnet.
• ★Rotating Aluminum Alloy Body: With yaw adjustment system, the wind direction position is automatically read and the rotor position is adjusted to capture the maximum wind energy. The tail fin is designed according to the aerodynamic principle.
• ★Real Parameter, Not False: Our product parameters are Real & Actual, not False. Base on designed after repeated experimental testing. Pls remember to contact us if you have any questions after received wind turbine. We should take charge of our product.

User questions & answers

Question:	All 3 wires coming out are black, are they all treated as hot
Answer:	Yes, 3 phase generator
Question:	If the wind generator is spining and isnt conected is it harmfull to the generator
Answer:	Arcing of the wires may happen
Question:	What wires are provided and how long are they
Answer:	3 6inch red wires about 10gauge
Question:	Has anyone seriously tested this in an off-grid situation? 33 amps at 12V seems pretty optimistic
Answer:	It don't work for me it vibrates like hell no power output stay away from this product bad news

Product features

Specifications:

Rated power:400 W

Maximum power:410 W

Number of blades:5

Rated voltage:12 V

Start-up wind speed:2.5 m/s

Rated wind speed :13 m/s

Working speed:3-25 m/s

Survival wind speed:40 m/s

High efficiency

1. Three-phase permanent magnet synchronous motor. Efficient and compact ac generator with high performance NdFeB permanent magnet.

2. An intelligent wind charge controller can shut down auto when the battery is fully charged.

Which can adjust current and voltage effectively.

3. The unique magnetic circuit design makes the starting torque very small, which can effectively ensure the wind turbine's breeze starting ability.

High quality

1.The wind turbine is made entirely of high quality aluminum and stainless steel fittings. It is not only lightweight, small in size, but also compact in shape.

2.The blade material is made of high-strength plastic with 30% carbon fiber and anti-UV anti-corrosion material, which is both beautiful and durable.

3.The surface of the wind turbine is coated with a special process that provides excellent resistance to oxidation and corrosion under any harsh conditions, as well as excellent corrosion resistance, water resistance and sand resistance.

Easy installation

1.Take out the wind turbine, put the wind turbine on the tower and align it with the flange hole. Mount the four flat gaskets on the four bolts, then insert the bolts into the holes corresponding to the flange. Tightening the screws by hex key.

2.The three wires of the wind turbine are connected to the transmission cable, each pair of wires is not less than 30 mm, and the tape at the connection end is at 100 mm.

3.Connect the wind turbine's cable to the controller and the battery must be connected to the controller before wiring.

Feature:

1. Wind Turbine starting with low speed; high wind energy utilization; beautiful appearance; low vibration on operation.

2. Wind generator Blade adopt reinforced fiber nylon which more durable and strong ability of Anti-wind. With optimized aerodynamic shape and structural design, has a High wind energy utilization.

3. Our wind turbine adopting patented permanent magnet rotor alternator, with a special kind of stator design, decrease resistance torque of the generators efficiently.

4. Being installed by human design and easy for installation, maintenance and repair.

• High Quality Blade-The blade is equipped with a copper inlay part that does not damage the nylon fiber when the bolt is tightened, and is not easily deformed or broken. At the same time, the blade is also designed with aerodynamics to make the rotor run smoothly, reliably and quietly. The working temperature is -40 ° C ~ 80 ° C, do not worry about the temperature is too low and cause the leaves to freeze.
• Excellent Heat Resistance-The coil is made of teflon wire, which is resistant to high temperatures and guarantees the power generation rate. It has effective regulation of current and voltage, high wind energy utilization factor, an increase of annual power generation.
• Durable Parts-It adopts three-phase AC permanent magnet synchronous generator, free running, low noise and long service life. teflon wire is heat resistant, which is not easy to damage the wire when the machine is overloaded. It is smooth in operation, good wind resistance for double row bearing
• Wide Application-This wind turbine is ideally suited for the leisure sector and is known for charging batteries for boats, gazebos, cabins or mobile homes, as well as for green windmills, home, corporate and industrial energy supplements!
• Package Included: 1 × Wind Turbine, 1 × Charge Controller, Some Screws. If you have any question, please don't hesitate to contact us.

User questions & answers

Question:	Can you tell me some more technical data? (maximal current, maximal wind
Answer:	The manufacturer markets the unit capable of producing 800 watts. there are no documentation indicating required wind speed. i tested it in tropical weather in the Bahamas and only got a maximum of 6 watts with around 30 mph wind
Question:	Where can I get pole for this windmill
Answer:	Lame answer about the needed pole mount; "Lowes". Is that the best answer the manufacturer can come-up with? How about a standard mounting post; length, diameter, etc. Additionally, how deep in the ground should the mounting post be? Concrete or another type of mounting system? There is much detail not addressed anywhere in your advertising, and this leaves me wondering if this is the right unit for my needs.
Question:	Wher can I download or access the instillation documentation? My turbine did not come with any paperwork
Answer:	Dear， Now you can download the User Manual on Technical Specification . Of course, you can contract us via Amazon Message, and we will send you the documentation. Hope it helps Regards Beamtop
Question:	Do you ship to africa, angola
Answer:	sorry, we cannot ship to Africa

Product description

The Starter Wind Turbine Generator works well at home, for RVs, remote cabins, and camping. This high-efficiency wind turbine comes with a robust 15-inch long blade and a two-hole mounting strap. Many people around the world are using these wind turbines because they are safe, effective, and user-friendly. In addition to tower installation for charging batteries, these wind turbines work very well for testing new inventions. This wind turbine has been used on vehicles, bicycles, boats, kites, kinetic wind sculptures and to harness hydropower from a stream. Each turbine generates up to 15 watts. Power LED lights, personal electronics, air pumps, and more. These wind turbines are commonly used with solar to help keep a battery topped off. A blocking diode is required for battery charging - Blocking diode: https://amzn.to/2VlJv3h

• High Performance Emergency Backup Power
• Necessary Clean Energy in Today's Climate
• At Home DIY Wind Power
• Helpful Project Support

User questions & answers

Question:	what is the diameter of the motor shaft? can I bay just motors without the rotor and what will be the price
Answer:	The shaft diameter is 1/8" and yes you can buy the motors at https://www.amazon.com/gp/product/B01KMZQT1Q?ref_=bb_dp_usw2_LRest
Question:	Is there a watt rating on this turbine
Answer:	Rafael, I don't know precisely. But I measured in the scale of mA with a strong wind and I got almost 500mA.Using the 10A range (almost short-circuit) and it measured 250mA.
Question:	Where may see the specs: starting wind speed and rated wind speed? Thank you
Answer:	Startup Wind Speed: 8 mph Rated Wind Speed: 24 mph Survival Wind Speed: 50 mph Rotor type: Horizontal axis Rotor diameter: 15″ Generator type: Brushed 30 volt DC motor Battery charging: 12 volt DC Charging rpm: 500 to 2000 rpm
Question:	Is it rain proof
Answer:	They can handle light to moderate rain. The back of the housing is open and can be sealed with caulking to make them more waterproof.

Product description

Our fourth generation wind turbine kit! Build a realistic wind turbine to harness power out of thin air. Wind is one of the most promising sources of clean, renewable energy available today. Wind energy has been used for centuries to pump water and crush grain in windmills, and is increasingly being used to generate electricity to power our modern world. Assemble a wind turbine complete with electric generator and adjustable rotor blades. The blades are designed with complex aerodynamic curves to look and work like modern-day wind turbine blades. Conduct experiments with your wind turbine, including experiments to optimize its performance by adjusting the angle of the blades and the placement of the turbine. Use the wind turbine to light up an LED and charge a rechargeable battery. Convert the generator into an electric motor and assemble a small electric car to demonstrate a tangible application for stored solar electricity. Discover how the sun makes the wind, providing us with an endless source of energy. Read about different types of wind turbines and windmills, the history of this technology, and how wind energy can be used to power homes and electric cars. The full-color, 32-page manual offers illustrated instructions and scientific information.

• Build and experiment with a real, working 3-foot tall wind turbine to learn how wind is one of the most promising sources of clean, renewable energy available today.
• Single-piece blade construction for improved durability and better aerodynamics.
• Generate electricity to charge a battery and power a small model car.
• New weatherproof battery box can be left outside!
• Includes stakes to secure the turbine to the ground.
• 2021 The Toy Association's Outdoor Toy Of The Year Finalist

User questions & answers

Question:	What types of batteries does it charge
Answer:	Thank you for your question. Wind Power 4 charges a rechargeable AA battery.
Question:	Can this be assemble, disassembled and reassembed again? I am thinking of using it for a stem project in my library surrounded by wind farms
Answer:	Thank you for your question. Wind Power 4 can be assembled and disassembled, and the chassis (generator motor and housing) can be reconfigured into an electric car. You can take a look at the full manual here: https://www.thamesandkosmos.com/manuals/full/627929_WP4_Manual.pdf

Product features

About Thames & Kosmos

From science experiment kits to board games to craft kits and magic sets, Thames & Kosmos products offer wholesome entertainment and engaging educational experiences for people--and families!--of all ages. T&K STEM (Science, Technology, Engineering & Math) kits cover these scientific areas and more:

• Physics
• Chemistry
• Biology
• Engineering
• Robotics & Programming
• Preschool science and and early learning
• Alternative energy

Product description

Celebrate green energy innovation with the LEGO Creator Expert 10268 Vestas Wind Turbine set. Developed in partnership with Vestas, this detailed, motorized LEGO model captures the elegance and graceful movement of a traditional wind turbine and features a new-for-January 2019 spruce tree manufactured from sustainably sourced plant-based plastic. At approximately 39” (1m) high, the structure towers above a wooded hill and a house with furnished patio, mailbox, flowers and a white picket fence. Turn the nacelle left or right and switch on the included Power Functions motor to rotate the adjustable wind turbine blades and illuminate the cottage’s porch light. This collectible science toy has been designed to provide a challenging and rewarding building experience with a touch of nostalgia and makes a great display piece for the home or office. This big LEGO set also includes a Vestas service vehicle and 3 minifigures: 2 Vestas service technicians kitted out with safety helmets and a woman, plus a dog figure.

• Build an icon of wind energy with the collectible LEGO Creator Expert Vestas Wind Turbine, complete with Power Functions motorized blades, trees and greenery, cozy cottage and a Vestas service van!
• This big LEGO set also includes 3 minifigures: a woman and 2 Vestas service technicians, plus a dog figure
• Measures approximately 39-inch (100 cm) high, 24-inch (62cm) wide and 12-inch 31cm) deep
• 826 pieces – For boys and girls aged 12+ and for fans and big kids of all ages
• This LEGO Creator Expert Vestas Wind Turbine 10268 set can be built together with all other original LEGO sets and LEGO bricks for creative building

User questions & answers

Question:	Is the Vestas logo a sticker you put on after the fact or is it printed on the actual lego
Answer:	Vestas logo printed on the actual LEGO pieces.
Question:	Does the turbine spin fast enough where it would actually create a breeze in the room, similar to a fan on low setting maybe
Answer:	Hi there, While the LEGO® Vestas Wind Turbine blades are adjustable and it has the power to illuminate the porch light, it doesn't provide a breeze like a fan. - Jane, LEGO® Customer Service
Question:	How loud is the motor
Answer:	It's not to loud but it is noticable, it doesn't bother me to much so you will be fine. Hope this helps!
Question:	How Tall Is It
Answer:	Hi there! The total height of this set is about 39" inches tall (including the blades). Kind regards, Matt - LEGO® Customer Service

Product features

Includes Power Functions!

Motor makes turbine spin.

New sustainable plastic!

Spruce tree made from plant-based material.

You’re in control!

Adjust the nacelle and turn on the power.

Lights on!

Power Functions motor turns on porch lights

Take a break!

Enjoy the beauties of nature.

Back to work!

Slide out the tool compartment.

Product description

👉👉👉Please note before Purchase: In order to improve the display effect, the turbine needs to be driven by a fan or blower at a right angle instead of natural wind. Natural wind needs to be relatively large to generate electricity. The greater the wind energy, the greater the power generated by the generator. If the wind is small, the leaves will rotate slowly, although it will generate electricity, but the output voltage and current will be small, and the light bulb will not turn on. (The natural wind is too small to light up the led, which has nothing to do with product quality.)

💝 Specifications:

✅ Large fan blades: Scrub the injection molding process, the blades diameter 17.5cm/6.9inch, has 11 blades, the wind is very strong, Whether it’s an electric fan blowing, or electricity used in wind power conversion effect is very good.

✅ Power generation motor: 280 motor. With fan blades, the output current, voltage is also high. Under the fan, max output about 5.5v 80ma current. Actual measurement. If it is blowing in the hair dryer, current and voltage estimates will be higher.

✅ 5V 5W LED light: The led light has a wiring clip, the red clip is the positive pole, and the black clip is the negative pole. The operating voltage is between 2.4v and 6v. The light can be on when 2.4V. Fully brightened at 5v. The power of this led light is 5 watts. So the brightness is very good, much brighter than the average 3w. 

✅ Other Parts Specification: Fixed angle bracket 125x125x2mm, mounting hole is about 4.5mm; Screw nut and screw flat washer are M4, screw length 20mm; Ties is 4.6*150mm.  Wind motor generator can simultaneously power 8pcs 5V 5W LED lamps.

👉 Package Included:

1 x Fan Blades

1 x Motor with one Fixing Bracket

1 x 5W LED with wiring clip 

1 x Fixed Angle Bracket

4 x Ties

12 x Screw set

• 👉 👉 【PLEASE NOTE BEFORE PURCHASE】: In order to improve the display effect, the turbine needs to be driven by a fan or blower at a right angle instead of natural wind. Natural wind needs to be relatively large and stable to generate electricity. The greater the wind energy, the greater the power generated by the generator. If the wind is small, the leaves will rotate slowly, although it will generate electricity, but the output voltage and current will be small, and the lights will not turn on.
• ❤️【Large Fan Blades】: Nubuck Process, Fan blade diameter 17.5cm/6.9inch, a blade has 11 leaves. the wind is very strong, whether it is made of fan blades, the output wind, or electricity used in wind power conversion effect is very good.
• ❤️【Power Generation Motor】: 280 motor. 0~36V all can use. 3800rpm@12V, 7600rpm@24V. used with fan blades, the output current, voltage is also high. Under the fan, the maximum output of about 5.5v 80ma current. Actual measurement. If it is blowing in the hair dryer, current and voltage estimates will be higher. (The sunken circle mark on the tail is the positive pole of the motor.)
• ❤️【5V 5W LED Light】: The led light has a wiring clip, the red clip is the positive pole, and the black clip is the negative pole. The operating voltage is between 2.4v and 6v. The light can be on when 2.4V. Fully brightened at 5v. The power of this led light is 5 watts. So the brightness is very good, much brighter than the average 3w. The quality is very good.
• ❤️【Widely Application】: Good choice for teaching physical DC wind power generation principle, It also a great teaching tool to develop children's hands-on ability and develop interests. Not only for testing and teaching purposes, but also for many practical DIY purposes. Such as bicycle wind power lighting. As the model is packaged by completely accessory sets, the delivery kit is as shown in the first picture. you need to assemble by yourself, just enjoy the DIY fun.

• 1.（-Safety-）: 5-leaf double-axis vertical blade design, which looks like a Red lantern. Safety factor is high due to blades be fixed inside by a flange, then not risk of blade falling off.
• 2.（-High Wind Energy Utilization-）: Wind blades adopt reinforced fiber nylon which more durable and strong ability of Anti-wind. Especially with optimized aerodynamic shape and structural design, has a High wind energy utilization. Wind turbine can start by breeze and adapt to 360° wind, no yaw system is needed.
• 3. (-Quietly-): The vertical wind turbine is quieter than horizontal axis turbine. Double bearings make it more stable and not easy to shake when wind generator is running. Silent rotation, suitable for home, boat, marine, monitoring use, solar and wind hybrid street lighting system.
• 4. (-Excellent Generator-): Permanent magnet three-phase alternating current can reduce the resistance torque of wind generator effectively. Also make the wind wheel and the generator matching better and then running more reliability.
• 5. (-Installation convenience-): Vertical axis wind turbine can use a screw pile foundation. It is a cost reduction and easy&quick installation compare with concrete foundation installation. Screw pile foundation can be fully recycled at the end of life. An environmentally friendly and low carbon emission way.

User questions & answers

Question:	How strong of wind can it Handel? Say driving downward the road at 65mph
Answer:	I don’t think I’ve had that high of winds yet. It’s more about your pole then the turbine. Best I’ve had is 58 and all went well.
Question:	Can this be mounted hanging upside down with the mounting bracket on top
Answer:	Don't see why not
Question:	This will charge a 12v dc battery right
Answer:	Yes, but you need some strong, steady winds. I have ended up using both wind and solar PV.
Question:	does it come with a rectifier
Answer:	It comes with a charge controller, is that what you mean.

Product features

Specifications:

Rated power:200 W

Maximum power:220 W

Number of blades:5

Rated voltage:12 V

Start-up wind speed:1.5 m/s

Rated wind speed :11 m/s

Safe wind speed: 45m / s

High quality

1. Wind turbine blade is made of reinforced fiber nylon, which more strong flexibility and high safety factor. The optimized aerodynamic shape and structural design, make the wind energy utilization coefficient is high, and increasing more power generation.

2. Double bearings make it low vibration operation and quietly. Also let wind generation can start in low wind speed, silent rotation in stably, high utilize rate of wind energy.

3. The surface of the wind turbine with special spraying treatment that provide excellent resistance to oxidation and corrosion under any harsh conditions. As well as excellent corrosion resistance, water resistance and sand resistance.

High efficiency

1.Three-phase permanent magnet synchronous motor. Efficient and compact ac generator with high performance NdFeB permanent magnet.

2. A fully integrated voltage regulator that automatically shuts down when the battery is fully charged.

3.The wind is controlled by intelligent microprocessor, which can effectively adjust current and voltage.

4.The unique magnetic circuit design makes the starting torque very small, which can effectively ensure the wind turbine's breeze starting ability.

Easy installation

1.Take out the wind turbine, put the wind turbine on the tower and align it with the flange hole. Mount the four flat gaskets on the four bolts, then insert the bolts into the holes corresponding to the flange. Tightening the screws by hex key.

2.The three wires of the wind turbine are connected to the transmission cable, each pair of wires is not less than 30 mm, and the tape at the connection end is at 100 mm.

3.Connect the wind turbine's cable to the controller and the battery must be connected to the controller before wiring.

Feature:

1. Starting with low speed; high wind energy utilization; beautiful appearance; low vibration on operation.

2.Being installed by human design and easy for installation, maintenance and repair.

3.Wind Turbine Blade be molded precise injection with new process, together with optimized design of aerodynamic contour and structure. Which can make Blade in high utilization of wind energy, and then generate more energy output.

4.Our generators, adopting patented permanent magnet rotor alternator, with a special kind of stater design, efficiently decrease resistance torque of the generators.

Note：We are equipped with common controls. If you want to make wind-solar complementary system, you can buy wind-solar complementary controller to replace

• 1.★Beneficial to Solar or Wind System:On cloudy or windless days when your battery gets low, it will automatically switch to grid power, protect your battery.
• 2.★Works like an opposite direction UPS: The ATS controller will switch to grid power when batteries votagle are lower than cut off point,it will switch back to battery power when the batteries votagle are higher than recovery point.
• 3.★Auto distinguish:DC 12/24/48V,AC 100-120V 60HZ / 220-240V 50HZ auto distinguish.User can define the Cut-Off and Recovery Voltages.Recovery voltage must be higher than Cut-off voltage. Battery type: Suitable for Sealed,Gel,Lead-acid,Lithium battery and so on. as long as the voltage of your battery are within the voltage ranges in the followings.9-17V at 12V system;18-30V at 24V system; 30-60V at 48V system.
• 4.★Big Power:5.5kw(110V) or 11KW(220v),Fast Transfer time:Inverter transfer to public power ≤10ms,public power transfer to inverter ≤16ms.
• 5.★LCD display:Battery real-time voltage;working status of public power,inverter and battery.

User questions & answers

Question:	Is this compatible for grid power 220v 60hz? because the grid power in our area is 220-240v 60hz
Answer:	It says 220-240 50hz but it will work with 60hz as it doesn’t monitor the frequency. It’s just a big switch which switches between supplies when the batteries supplying your inverter reach a preset level.
Question:	is this transfer unit fused? If not what size fuse do I need
Answer:	The unit is not fused. The internal switching relays can handle 50 Amp I would recomend a 40Amp circuit breaker at the public power input. The inverter should go into overload protection, should a short occur at the output, while it is swiched to inverter input.
Question:	Can this switch be wired with two 120v (split phase power) inputs in lieu of 120v and neutral? The neutral would be hot1 the other input hot
Answer:	I use one as live and one as neutral for 120 volts, but it (the included instructions) seems to indicate you can use them as both live to get 240 volts and it says it can handle up to 11KW this way. However, I have not tried it to see if it works.
Question:	Can i have the correct wiring diagram becuse the manual is showing that the Neutral is going to the line side on the public power
Answer:	White wire to white wire black to black green to green . Watch this video https://www.youtube.com/watch?v=ni0A_ZdH7aU

Product features

Product Instroduction

This dual power transfer controller ATS-11KW is used between an off-grid system and public power.The controller is separately connected with public power,inverter,battery and load.On the top of the controller,there is an on/off switch,please turn on the controller after ensuring all cables are well connected.

Works like an opposite direction UPS

• The ATS controller will switch to grid power when batteries are lower than the user define.
• Auto distinguish:DC 12/24/48V,AC 100-120V 60HZ / 220-240V 50HZ auto distinguish.
• User can define the Cut-Off and Recovery Voltages.

Beneficial to solar and wind system

• When cloudy or windless days and your battery get low,automatic switching to grid power,Take over your battery.
• BIG POWER:5.5kw(110V) or 11KW(220v),
• Fast Transfer time:Inverter transfer to public power ≤ 10ms,public power transfer to inverter ≤ 16ms
• Please tie the ground wire together.

Application Area

• In applications where there is a stand-alone solar or wind system with an available AC mains supply(utility power),one can choose to use the energy stored in the battery(IES) first and when the inverter disconnects due to a low voltage battery,the controller automatically transfers the loads to the mains(utility power).

Adjustable Cut-Off and Recovery Voltages

1.LV-SW:setting the switching voltage function.

2.BAT-V:normal displaying battery voltage.

3.HV-SW:setting the recovery voltage

4.12V,24V,or 48V:displaying after the system indentification.

5.LCD digital:a.battery voltage,b.low voltage setting switching voltage,c.low voltage recovery to set switching voltage.

6.Right arrow:shows low voltage switch to mains status.

7.Left arrow:shows the low pressure is restored to the inverter state.

8.LCD red no function control display,fixed display after power on.

the battery icon is low battery status

Parameter

Rated Power:5.5kw(110V) or 11KW(220v),

Input Voltage:Auto distinguish:AC 100-120V or AC 220-240

Output Voltage:Auto distinguish:AC 100-120V or AC 220-240

Transfer time:Inverter transfer to public power ≤ 10ms,Public power transfer to inverter ≤ 16ms

LCD display:Working status of Public power,inverter and battery

System voltage:Auto distinguish:12V or 24V or 48V

BAT.Low Cut-down:Default 11V/22V/44V,adjustable

BAT.Low Recovery:Default 13.5V/27V/54V,adjustable

Battery type:Suitable for Sealed,Gel,Lead-acid Lithium battery and so on. as long as the voltage of your battery are within the voltage ranges in the followings.9-17V at 12V system;18-30V at 24V system;30-60V at 48V system.

Application:Off-grid solar or wind system

Product description

Specifications:

Colors: white

Rated power: 600W

Nominal voltage: 24V

Start-up wind speed: 2m/s

Rated wind speed: 13m/s

Survival wind speed: 45m/s

Package weight: 13kg

Wind wheel diameter: 0.9M

Number of blades: 5

Blades material: Nylon fiber

Nylon fiber: Three phase ac permanent magnet generator/Maglev generatorsThree phase ac permanent magnet generator/Maglev generators

Controller system: Electromagnetic

Speed regulation: The wind Angle automatically

Working temperature: -40℃～80℃



Package included:

1 x Wind Turbine Generators(with controller)

1 x Stainless steel U-type nuts

1 x Blade Hub

1 x Stainless Steel Plate

4 x Flange Bolts

1 x Flange plate (other supplier may not supply)

10 x Blade Bolts

• ☀ Using reinforced nylon fiber on wind wheel blades and the aerodynamic lantern shape design, the coefficient of wind energy utilisation is increased, so as increased annual electricity generation capacity.
• ☀ Easy installation, low maintenance. Using high-power tracking intelligent microprocessor control, effective regulation of current and voltage.
• ☀ Low start up wind speed, high efficiency, small size, low vibration. The shell is made of stainless steel die-casting, with double bearing carrier, anti-typhoon capacity is stronger, safe and reliable operation. Easy installation, low maintenance.
• ☀ Wind Turbine using permanent magnetic generator together with the special stator design, effectively reduces the generator resistance torque, while allowing wind turbines and generator has better matching characteristics, hence increases the reliability of the wind turbine.
• ☀ For home use, For monitoring use, For boat / marine use, For wind solar hybrid streetlight use.

Product description

Specifications: Material: ABS engineering plastics Base size: approx. 110*110*35mm/4.33*4.33*1.37'' Blade diameter: approx. 120mm/4.72'' Height: approx. 240mm/9.44'' Roundel Diameter: approx. 85mm/3.34'' Net weight: approx. 146g Note: Please allow 1-3mm differs due to manual measurement. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. 1 x Solar Powered Rotating Base 1 x Tray 1 x windmill

• A great replica of a Wind Powered Turbine, which is powered by sunlight shining on a solar panel in the base
• It is a great desk model for an executive or an educational item to assist children understands the change between Solar Power and wind power
• It is a great gift for your child, for your friend, for your client, and everyone who is interested in this product. Easy assemble
• No glue required, No battery required
• Material: ABS engineering plastics

User questions & answers

Question:	Hello, can it power with a led terrarium light
Answer:	I don't see any output connection, so I am guessing no.
Question:	What purpose does the disk have
Answer:	The disk is there is you want to use it as a tray table. The box we got had a wrist watch sitting on it for example. Not really sure why someone would use it that way since it is a toy wind turbine, but that is what I think it is. I got rid of mine because my son just wants it for the turbine part.
Question:	is this item durable
Answer:	My grandson had 2 and they lasted about 1 day unfortunately. Not durable enuff for a 4 year old