11 best model train tracks

Product description

Snap-Fit E-Z Track 9” Straight Track (4/card) - Nickel Silver Rail With Gray Roadbed - HO Scale. Bachmann's exclusive E-Z Track system makes set-up quick, easy and fun.    E-Z Track is designed to Snap Together and Stay Together on Floors, Tables and Carpets.  This product features Nickel Silver Rail with Gray Roadbed, Designed to Provide Excellent Conductivity and Durability. Four pieces of 9” Straight Track build 36” of railroad.

From the Manufacturer

Bachmann's exclusive E-Z Track system makes set-up quick, easy and fun. Nickel Silver Rail. Gray Roadbed. E-Z Track System --Snaps Together, Stays Together on Floors, Tables and Carpets.

• E-Z Track System - Snaps Together, Stays Together on Floors, Tables & Carpets
• Set Up is Quick, Easy and Fun - No Nails, Screws, or Special Tools Needed
• Nickel Silver Rail with Gray Roadbed, Designed to Provide Excellent Conductivity and Durability
• Easy to Use For Both Temporary and Permanent Train Layouts
• HO Scale 1:87 - Modeled From AAR Track Engineering Dimensions

User questions & answers

Question:	Where can I get a replacement activator? I have it’s part number but can’t seem to find it anywhere
Answer:	i would think that a major or specialty model train shop would have a replacement activator. ..... make your own fastback activation track section ---- you tube.
Question:	How many pieces of track are there
Answer:	Your qustion does't give me much to go on but track is packaged in 6 pieces per pack most of the time. It comes in 5 inch and 10 inch lengths in straight track. You can buy bulk track in 30 inch lenghts and 50 pieces per box. There are a number of track package deals on the market that contain switchs, curves and straight track to form various sized layouts. This is all I can think to tell you from the question as you asked it for N scale track.
Question:	Is this track work to dcc equipped loco and dcc controller
Answer:	Yes, this track works just fine with either DC or DCC. May even be better than hand layed track as joint problems and track alinement is easier for snap-fit E-Z Track than with hand layed track. I am and have in the past ran both systems on snap-fit.
Question:	ARE ALL THE TRACKS ho GUAGE
Answer:	Yes. We received ho gauge tracks.
Question:	Dear sir i have a eztec radio control battery operated christmas train i am very keen to buy more track particularly straight pieces are any available
Answer:	This would NOT be the type of track you need as this is HO scale. Unfortunately I do not stock the product you need.
Question:	Does this same set come with gray road bed
Answer:	Yes it does, here's a link: https://www.amazon.com/dp/B01ES6EMVY
Question:	Can i use this with the santa fe ho set (without needing a different controller
Answer:	Should work with any Bachmann HO scale set
Question:	Does it come with a power pack
Answer:	no!

Product features

Discover Everything Bachmann Trains Offers to Get Started in Model Railroading

Since 1833, Bachmann has been known for providing innovative design at a good value. We are now one of the world's largest distributor, by volume, of ready-to-run train sets, locomotives, track, and accessories. Bachmann is also the only train company to offer products in all five of the most popular scales: N, HO, On30, O, and Large Scale.

As a distributor of beloved Thomas & Friends products, Bachmann brings the adventures of Thomas the Tank Engine to life with a growing line of complete train sets, separate sale items, and accessories for children from 8 to 80-just add your imagination. Thomas & Friends is available in both HO and Large Scale.

Bachmann's exclusive snap-together E-Z Track System makes track setup quick, easy, and fun. Plasticville U.S.A. and SceneScapes buildings and accessories let you add the finishing touches for the perfect layout.

If You Are Purchasing a Train Set, It Will Include

1. Locomotive
2. Cars (Rolling Stock)
3. E-Z Track – available in either black roadbed with steel alloy rail or gray roadbed with nickel silver rail
4. Terminal/Rerailer
5. Terminal Wire
6. Speed Controller
7. Power Supply
8. List of Components

Track Assembly

1. Decide where to set up your train – a dry, firm, flat surface works best!
2. To make sure you have enough working room, make a test track layout by loosely placing track in desired configuration.
3. The terminal/rerailer section will later be connected to a power pack and power supply, so place it near an outlet or power strip.
4. Install under-track magnet, if your set comes with one. If your set does not come with one, magnets are available separately (HO Item No. 78999; N Scale Item No. 78998).
5. Assemble the track by pushing together. Make sure the rail and joiners are seated properly. Be careful that the rail joiners do not slip under the rail without properly connecting. This can cause train derailments and electrical circuit interruptions.
6. After track is assembled, double-check for joint connection and fit by lightly running your fingers over the top of the rails in both directions.
7. If you detect bumps or distortion on the track surface, recheck the rail joiner fit.

Power Connections

1. Power supply and speed control are plug and play; no tools are needed.
2. Power is supplied to the track and the locomotive by the power supply, speed controller, terminal wire, and E-Z Track terminal/rerailer.
3. First – turn knob on the speed controller counterclockwise until it stops (all the way to the left).
4. Next – attach terminal wire to the speed controller by plugging it in where it says 'To Track'.
5. Then – plug terminal wire into the E-Z Track terminal rerailer. Firmly push connector onto the track terminals.
6. Finally – plug the connecting wire from the power supply into jack on the speed controller labeled 'In'. Then plug power supply into a live wall outlet.
7. Some sets may come with a speed controller with two push button connectors. These are used to supply AC power to accessories.
8. To make positive and secure connections to these, push in buttons and insert each of the bare ends of the connection wire from your accessory.
9. The speed controller is capable of powering one accessory at a time.

Putting the Train on the Track

1. Put the locomotive on the track and run the wheels back and forth over the terminal rerailer track.
2. When the wheels glide smoothly over the track, you know the wheels are all on the track. If your set comes with a tender, attach it to the locomotive.
3. Add the rest of the cars that come with your set by placing them on the track and running them back and forth over the terminal rerailer until they glide smoothly. Then gently push the cars together – they will engage automatically.
4. Do not try to connect cars when positioned over an under-track magnet.

How to Use E-Z Mate Couplers (HO and On30 Scale)

1. Your set may be equipped with E-Z Mate magnetically operated knuckle couplers that let you perform real railroad switching and yard operations.
2. Coupling two cars with E-Z Mate couplers is as easy as pushing them together when they are not over an under-track magnet.
3. Uncoupling occurs only when over an under-track magnet and when there is no tension between the cars.
4. To uncouple E-Z Mate couplers, stop two couplers directly over the under-track magnet. With no tension between the cars, the couplers will open automatically.
5. If cars will not couple, check to be sure cars are not positioned over the uncoupling magnet or parked on a curve.
6. If cars will not uncouple, check to be sure the couplers are positioned directly adjacent to the magnet position indicator and that the indicator is placed in line with the center line of the under-track magnet.
7. Check that the magnet is secured to the underside of the track and fitted with the steel plate provided.

How to Run Your Train

1. Turn the knob on the speed controller clockwise until it stops (all the way to the left).
2. Plug in the power supply.
3. Begin feeding power to the track by slowly turning the knob on the speed controller clockwise.
4. Observe the direction of your train.
5. If it moves backwards when the controls indicate forward, stop the train.
6. Then simply disconnect, flip, and reconnect the terminal wire to the terminal rerailer track.
7. Remember – never leave your train running unattended!

Action Checklist (Troubleshooting If Your Train Doesn’t Run or Stops Running)

1. Is the power supply plugged in to a live receptacle?
2. Are the wheels on the track?
3. Is the wiring secure?
4. Is the track properly assembled?
5. Is the track properly seated in the rail joiner?
6. If your train stops or fails to start, a short circuit may be indicated. If this is the case, Unplug The Power Supply Immediately.
7. Common reasons for a short circuit: derailed wheels may cause a short. Check to make sure all wheels are on the track. Also check all connections and make sure there is no metal of any sort across the rails.
8. After checking everything carefully, resume operation.
9. Please note, your power supply is protected by a circuit breaker that automatically resets after a short circuit is corrected.
10. Allow up to 5 minutes for the circuit breaker to reset before resuming operation.

Keep Your Train in Top Operating Condition

1. Works better after couple hours of break-in time.
2. Train performs best under clean operating conditions.
3. Clean wheels and a clean track ensure good electrical contact.
4. After about every 8 hours of operation, wipe the track rails and exposed wheels with a soft, lint-free cloth.
5. Removal of black residue is normal.
6. Do Not Use Steel Wool To Clean Your Track.
7. Do not use common solvents, they may damage plastics - use track cleaner.
8. After 24 hours of use, light lubrication is required to keep train in top operating condition. Bachmann E-Z Lube or other hobby-grade lubricants are recommended.

Bachmann hopes you enjoy your train for many years to come!

• This wood model kit is made of premium 4mm thickness snap-together birch plywood by laser cut technology, precise and clean, fine in structure and durable, no glue required during assembling
• This wooden mechanical puzzle comes with detailed illustrated manual and easy-removable precut pieces on the stencil boards. You can follow it to assemble this 3d puzzles quickly and correctly. It is advised to smooth the burrs and gears by sand paper and wax before constructing(wax is not include)
• It is a wood DIY project kit for teens to build. Not only can bring a lot of fun but also cultivate your patience and attention, improve logic, problem-solving skills, promote abstract thinking and imagination
• A wooden train model will come out after construction, ideal for collection and decoration. It can run for about 10 meters one time when fully motivated. A good way to spend leisure time with your child at home. Or just enjoy the quiet time alone, focusing and releasing yourself in peace for reducing stress and improving an overall mood
• This locomotive train toy includes 221 pieces. It needs 4-6 hours to build for beginners. The finished model size is: 9 x 3.8 x 7.9 inch. Great gifts idea for birthday, Christmas, Valentine’s Day, Thanksgiving, and some other special days. For boys and girls under 14 years old, it is advised to build with the help of parents

Product features

GuDoQi 3D Wooden Models Collection

We focus on nice and creative 3D models made in premuim quality natural wood. While bringing fun to customers, also promote abstract thinking and imagination. A great family game with educational, entertainment and collection value. Good gift for holiday, brithday and Christmas etc

Laser Cut Technology

All the wooden pieces are cut by laser, precise and clean. Moreover, the built up model is firm and sturdy, good for long-term display and collection

4mm Thickness Board

The wood we have used for this steam locomotive train model is quality birch wood, thickness about 4mm, first class level in this field

Metal Engine

This steam locomotive model uses a metal spring engine instead of rubber band, which makes it strong enough to run for about 8 meters and more

Wooden mechanical puzzle

Classic design, a worthy addition to collection

Brain teaser games, with educational and entertainment value

Great parent and child time when building together STEM (Science, Technology, Engineering and Math) toy

Art and collection value, woodcraft and memory pass from generation to generation

Specifications:

Material: Birch plywood

Weight: About 2.4 lb

Built-up track size: 2.8 x 63 inch

Built-up model size: 9 x 3.8 x 7.9 inch

Product description

A true Disney classic, the magic of Frozen can be enjoyed all year long. Kids will not want to let this battery-powered, remote-controlled train set go. Join Olaf & Sven as they ride along on an animated flatcar for a frozen adventure.

• Set Includes: Battery-powered General-style locomotive and tender, Olaf & Sven Animated Flatcar, Boxcar, 24 curved and 8 straight plastic track pieces, RC Remote Control
• Locomotive Features: Battery-powered General style locomotive, Authentic train sounds including bell and whistle, Movie Sound Clips, Working headlight, Requires six C cell batteries (not included)
• Rolling Stock Features: Animated Flatcar – Olaf Spins! , Fixed knuckle couplers
• LionChief Remote Features: Forward and reverse speed control knob, Three buttons to whistle sound, bell, and special announcements, Requires three AAA alkaline batteries (not included)
• Ready-to-Play | Set Length: 50" x 73" | Recommended Age: 4 years +

User questions & answers

Question:	How do you turn volume down on frozen train set
Answer:	Yes but not necessary. Very cute by itself.
Question:	Are you able to add to it? with Tracks and other trains
Answer:	not sure. Ours has been played with often for over a week and still going strong so it's not a battery sucker.
Question:	How long will this run on 1 set of batteries
Answer:	Not sure. The switch on the top of the engine will conserve the battery, and makes a noise when it is on to ensure that you turn off the locomotive.
Question:	Approximately how long do the. 6 C batteries last
Answer:	Dear Anju, Thanks for inquring our Retroid Pocket 2 Android handheld game console. The retroid pocket 2 comes with open android as default, you can contact us once you recevie your parcel and we will send you the manual for how ot activate the games list. Thanks Retroid Pocket

Product description

Climb onto the Hogwart’s Express from King’s Cross Station Platform 9 3/4 and head off to Hogwarts School of Witchcraft and Wizardry. Same as in the films, this locomotive sports the running number 5972. Harry Potter has been bringing the magic back to the world’s imagination since they were first published in 1997 and brought to life on the big screen by Warner Brothers in 2001, capturing the hearts of children and adults alike. Bring the magic to life in your own living room with this train set that comes with everything needed to run it right out of the box!

• Ready to attend Hogwarts School of Witchcraft and Wizardry this year? The best way to get there is with the Hornby Hogwarts Express Train Set!
• In brilliant Hogwarts Red and containing a DCC Ready 5972 locomotive with working headlight, plus two coaches, this set makes a perfect gift or addition for any Harry Potter fan!
• The gift of a Hornby train set is the gateway to a whole new experience, a world of model railways where nostalgia is shared between generations and new memories are forged. Hornby is a household name and is famous as an international brand LEADER in the model railway hobby.
• Comes with everything needed to run the train right out of the box. Perfect to run around the base of a Christmas tree or to display with your other Harry Potter collectibles!
• This train set is OO scale while the track can also run HO scale. The set is electric and comes with a US Transformer that plugs directly into the wall.

User questions & answers

Question:	Is it able to use oil for smoke
Answer:	The train is really awesome, but it isn't a steam engine. It's incapable of producing smoke.
Question:	How do you set it up
Answer:	Set up was straight forward , assemble the track in an oval making sure that each track section is smooth . The transformer just plugs in and your ready to put the engine and cats on and start running. The only thing that was new to me was that the couplers were strange to me and I had to get used to how they hook up.
Question:	Comparison to the lionel Hogwarts train set that is half the cost
Answer:	This is half the size and half the features. -Nicholas Smith Trains
Question:	How big of a circle , oval or size of the assembled tracks are? 30 Inches, 65 Inches how big a space do you need
Answer:	I have not set it up yet, but the box graphics show 1550mm X 1130mm. This works out to 61 in X 44.5 inches.

Product description

Each section combines track and roadbed into a single unit, with snap-fit assembly and plug-in wiring to provide instant railroad fun. A hidden locking feature holds sections securely together until you're ready to take them apart. Easy to set up on any surface, including floors and rugs: no special tools, nails or boards are needed. A great system for Christmas, displays or permanent layouts.

• This is an HO SCALE product
• Snap fit assembly
• Steel Alloy rails with black roadbed
• New in original package
• You get one left and one right switch

User questions & answers

Question:	Do switches have to control direction
Answer:	Yes
Question:	Will it connect to standerd track
Answer:	It will, but I am not sure why you would want to. You can get the same thing is Atlas code 100 track without the roadbed
Question:	Do these have the small y part of plastic on the actual track like the ones I have, so that the engine is NOT conducting on that side as it passes
Answer:	Yes. They have insulated "frogs" and internal jumpers so that both the straight and diverging routes are powered no matter which direction the trains take. These are also know as "DCC Ready". Older types of switches have to be wired so that the polarity of the frog follows the train (so called power routing switches).
Question:	Will these work with a DCC controller
Answer:	No, you need special turnouts to integrate into a DCC system. Bachmann product numbers are 44130 and 44131

Product description

This is a Box of Five 36\"\" HO Nickel Silver Superflex Train Track Pieces from Atlas. It's for beginning or advanced train modelers. FEATURES: Five 36\"\"-pieces of HO flexible track. Track is so flexible it may be used as straight or curved. Five 36"-pieces of HO flexible track. Track is so flexible it may be used as straight or curved, though it is straight while in its natural state. Nickel silver rails and black ties that resemble wood. Track pieces are sturdy, well crafted, bendable to the side, and realistic.

• Box of Five 36" HO Nickel Silver Superflex Train Track
• Nickel silver rails and black ties that resemble wood.
• REQUIRES: Rail Joiners

User questions & answers

Question:	Can the Life Like HO train run on this track rather tan the power loc track that came with the train
Answer:	Yes
Question:	Do the plastic ties have spaced holes to nail the track down? If not how do i adhere to wood substrate
Answer:	There are holes approximately 10 ties apart. some are single and others in pairs 4 ties apart. The holes are sized for track nails. You need to be careful if you are nailing into plywood, as the wood is hard and the nails are easily bent. If this is a problem, drilling a pilot hole in the wood before setting the track nail will make the task easier.
Question:	how tight of a radius can you make with this
Answer:	You can go down to about 8 inch radius (tram layout)
Question:	Was told Hornby 00 joiners work, the joiners seem to be very close but cant slip them on the rails by hand. Is it ok to tap them on
Answer:	you can try but atlas rail joiners are so cheap why not just buy a package

Product description

Each section combines track and roadbed into a single unit, with snap-fit assembly and plug-in wiring to provide instant railroad fun. A hidden locking feature holds sections securely together until you're ready to take them apart. Easy to set up on any surface, including floors and rugs: no special tools, nails or boards are needed. A great system for Christmas, displays or permanent layouts. Twelve sections of curved 18" radius track make a full circle; 16 sections of curved 22" radius track make a full circle

• Unique snap fit design
• Can be operated on floors, carpet or table top
• HO (1:87) Scale
• Nickel Silver rails with Gray Roadbed
• We are authorized Bachmann dealers

Product description

One of the most beautiful trains to grace the railway is back in our Ready-to-Run line-up and better than ever, the Santa Fe Super Chief! Last produced in 2013 by Lionel, we have taken this iconic set and additional rolling stock to a new level by adding our LionChief remote and Bluetooth technology giving you multiple ways to operate your set. You are not going to want to miss putting this beauty on your layout!

• Set Includes: Santa Fe FT diesel locomotive, Two coach cars, Observation car, Eight curved O36 FasTrack track sections, one 10" straight FasTrack, Plug-Expand-Play power lock-on section, one FasTrack terminal section, and two 10" straight, Wallpack power supply, LionChief remote
• Locomotive Features: Electric locomotive controlled by LionChief remote or Bluetooth LionChief app, On/Off switch for sound, RailSounds RC sound system with diesel revving and background sounds, horn, bell, and user-activated announcements, Operating directional headlight, Two powerful maintenance-free motor, Operating couplers, Illuminated cab interior
• Passenger Car Features: Die-cast metal trucks and operating couplers, Illuminated and detail interior, Flexible diaphragms between cars, Opening doors
• LionChief Remote Features: Forward and reverse speed control knob, Three buttons to activate horn, bell, and special announcements, Requires three AAA alkaline batteries (not included)
• Minimum Curve: O31 | Set Length: 52 1/2" | Recommended Age: 10 years +

User questions & answers

Question:	Descripción del producto
Answer:	Lots of train accessories @train world.com
Question:	Where do I find the tunnels and stations ect
Answer:	I added three extra passenger cars and a small amount of extra track. The engine pulls with ease on a flat service. I posted a video recently and ran the train very slowly to capture close ups as I also added passengers to the cars. The engine was only at 15% power. At 60% it flies. Clean track and good solid connections are key. This is using the wall wart power supply which is included with the set.
Question:	Can it pull the 2 extra add ons
Answer:	Won’t let me leave a video in the comment, or I would. This a great set though. I even went and got the two additional cars.
Question:	Does anyone who has purchased this train set mind posting a video of the train in action? It would be great to hear the horn, bell, announcements
Answer:	If the switch for smoke is in the on position per guide pages 11 and 15 and you have added smoke fluid then smoke should operate when the locomotive starts to run. I have found with other locos that if smoke fails to appear after a short period carefully blow down the chimney to clear a possible airlock. I am not saying this works every time but worth a try.

Product description

Each section combines track and roadbed into a single unit, with snap-fit assembly and plug-in wiring to provide instant railroad fun. A hidden locking feature holds sections securely together until you're ready to take them apart. Easy to set up on any surface, including floors and rugs: no special tools, nails or boards are needed. A great system for Christmas, displays or permanent layouts. Twelve sections of curved 18" radius track make a full circle; 16 sections of curved 22" radius track make a full circle

• Unique snap fit design
• HO (1:87) Scale
• Steel alloy Rails with Black Roadbed
• N/A
• N/A

User questions & answers

Question:	What is the measurement between the rails
Answer:	The best answer that I can give is the measurement from outside edge of each rail. In inches it's .75. In centimeters it's 1.9.
Question:	Does this product work
Answer:	Hi - Not sure what you mean by work. My first layout HO Layout amd it was on carpet. It was NOT EZ Track. It did loosen up. This is Bachmann EZ Track - they interlock to each other tracks. Regardless if it is Curved, Styraight, Switch or any other Bachmann EZ Track? Is this your first HO Layout? If it is you will not go wrong. We carry all Track, Power Supply, Cars, Locomotives and layout ready items. We have been in business since 1999 and selling on Amazon since 2002. We only sell what you need. We are here to help you in any way possible -- Tom
Question:	Does this track have electrical connection
Answer:	Hi Thomas - No, this is just Straight EZ Track. If you need a Track with electric connection you will need a #44410 - 9" Straight Terminal/Re-Railer or a 18"R #44402 - Terminal/Re-Railer. My competition is offering Free Shipping. I will be listing this afternoon an oval track set that is 35" X 65". Thai is a complete oval selling for $49.95 + Shipping. Hope this helps and thank you for your interest in our product Tom
Question:	Can these tracks be used with a blue hat north pole junction christmas train
Answer:	Hi - No, I am sorry but the Blue North isrra1004 toy train manufactured in Japan. I might suggest Google the Manufacturer. Most companies in Japan translate emails. With the time difference you may not get a reply till the next day. Hope this helps and good luck -- Tom
Question:	Can I make an oval if I buy straight teach separately
Answer:	You sure can. I just got these and the 12-piece straight track for my kids for Christmas to do exactly that. Just forme a circle and separate in the middle and add the straight tracks to make the oval as big as you want.
Question:	Does one of the pieces have a terminal for the power hookup
Answer:	No
Question:	What is the roadbed color
Answer:	black
Question:	i already have 36" of Bachman track. what do i need to make this into a figure
Answer:	You need a four way cross over piece that looks like an "X" but turned on its side.

Product description

All aboard for brand New adventures on rails! The Lionel trains Pennsylvania flyer ready-to-play train set is leaving the station on a non-stop run to fun. This electric RC locomotive set features a detailed and ruggedly built berkshire-style locomotive with working headlight, smoke, and sounds. The set includes a steam locomotive and tender, 3-domed tank car, boxcar, and caboose. Download the Bluetooth app to control you train from your phone, and prepare for non-stop adventure with the Lionel trains Pennsylvania flyer.

• Set Includes: 0-8-0 locomotive and tender, Three-dome tank car, Boxcar, Caboose, Eight curved O36 FasTrack track sections, one 10” straight FasTrack Plug-Expand-Play power lock-on section, one FasTrack terminal section, and two 10” straight FasTrack sections, 54W Wall-Pack Power Supply, LionChief remote for locomotive
• Locomotive Features: Electric locomotive controlled by remote or Bluetooth LionChief app, Operating headlight, On/Off switches for smoke and sound, RailSounds RC sound system with steam chuffing and background sounds, and useractivated whistle, bell, and announcements, Puffing smoke, Powerful maintenance-free motor, Operating couplers, Chuffing sounds in synch with puffing smoke
• Rolling Stock Features: Operating couplers, Opening doors on boxcar, Metal handrails and ladders on tank car
• LionChief Remote Features: Forward and reverse speed control knob, Three buttons for whistle sound, bell and special announcements, Requires three AAA alkaline batteries (not included)
• Minimum Curve: O31 | Set Length: 45" | Recommended Age: 10 years +

User questions & answers

Question:	Why won't the smoke work
Answer:	Yes, each section has 1 or 2 holes which go right through the plastic through which screws can be put through into wood or anything else underneath. Do not screw it down to solid as if the temperature goes up and down then the track expands and contracts and the track can be distorted. I find a screw here and there is enough.
Question:	can the tracks be secured to plywood
Answer:	The cars have a plastic top and a steel pressed chassis with metal wheels and axles. The tender is the same with the loudspeaker only in it. The locomotive has a die cast upper removable body. The chassis is a mixture of metal and composite plastic. All the electronics are in tge locomotive.
Question:	Is the engine die cast metal
Answer:	I recently bought one of these sets and it was made for the 2017 season. The associated books are copyright 2017. We are now in 2017 and it looks like Lionel do a Lioncheif extra for some models with more facilities on the remote and better announcements. However this works well and the bell,, whistle, and chuff work very well. The volume of the sound can be changed from the handset with even more changes possible on bluetooth. Bluetooth seems to only work on an i phone or android.
Question:	What year is this model? Is it the most current? There is another one listed for $227.99, what is the difference
Answer:	Good luck finding it, we never did. Ordered 3 of them, 2 for the grandkids. Set up ours before xmas and was VERY disappointed in it. I was told there was a switch, but could not find it. Could not keep train on the track. Thought the cars were very light and cheaply made. We returned all 3 sets. Asked others for their opinions, and they all thought it was pretty much junk. I was excited for this for the kids, but knew it was junk.

Product description

Bachmann Trains E-Z TRACK CROSSING GATE - HO Scale. This authentic looking crossing gate will add action and detail to your E-Z Track layout. Gates automatically lower as train passes by. Compatible with steel alloy or nickel silver E-Z Track.

From the Manufacturer

Add action to your E-Z Track layout with this automatic crossing gate. Authentic looking crossing grate. For use with Bachmann E-Z Track. Repair inquiries, or general inquiries may also be sent to: Bachmann Customer Service 1400 East Erie Avenue Philadelphia, PA 19124 Bachmann's Service Department is available Monday through Friday from 9 am to 4 pm (All Times Eastern). Customer Service for all scales can be reached toll free by US and Canadian customers at 800-356-3910 or Fax at 215-554-6734. Customers from all other countries should call [Exit Code]-1-215-533-1600.

• Authentic Looking Crossing Gate
• Adds Action and Detail to Your Train Layout
• Gates Automatically Lower As Train Passes By
• Compatible with Bachmann Steel Alloy or Nickel Silver E-Z Track
• HO Scale 1:87

User questions & answers

Question:	is the track on this item made of silver/nickle or steel? i know its compatible with either
Answer:	T=I think it's the nickle type.I had problems with my diesel engine going over it.
Question:	Why did it take 6 days to ship out my order
Answer:	Postal clearance
Question:	The picture shows to gray pieces that elivate the level of the track going in and out.. I did not find them in my kit. Should they be included
Answer:	The gray pieces are track sections show for illustrative purposes. They are not included with this set.
Question:	Will this work with track on the auto reversing trolley set ? The trolley set claims to work with only auto reversing track
Answer:	I think the track has to be connected to an auto-reversing track section or unit of some sort; if that's the case, I imagine this crossing gate could be used with it.

Product features

Discover Everything Bachmann Trains Offers to Get Started in Model Railroading

Since 1833, Bachmann has been known for providing innovative design at a good value. We are now one of the world's largest distributor, by volume, of ready-to-run train sets, locomotives, track, and accessories. Bachmann is also the only train company to offer products in all five of the most popular scales: N, HO, On30, O, and Large Scale.

As a distributor of beloved Thomas & Friends products, Bachmann brings the adventures of Thomas the Tank Engine to life with a growing line of complete train sets, separate sale items, and accessories for children from 8 to 80-just add your imagination. Thomas & Friends is available in both HO and Large Scale.

Bachmann's exclusive snap-together E-Z Track System makes track setup quick, easy, and fun. Plasticville U.S.A. and SceneScapes buildings and accessories let you add the finishing touches for the perfect layout.

If You Are Purchasing a Train Set, It Will Include

1. Locomotive
2. Cars (Rolling Stock)
3. E-Z Track – available in either black roadbed with steel alloy rail or gray roadbed with nickel silver rail
4. Terminal/Rerailer
5. Terminal Wire
6. Speed Controller
7. Power Supply
8. List of Components

Track Assembly

1. Decide where to set up your train – a dry, firm, flat surface works best!
2. To make sure you have enough working room, make a test track layout by loosely placing track in desired configuration.
3. The terminal/ Rerailer section will later be connected to a power pack and power supply, so place it near an outlet or power strip.
4. Install under-track magnet, if your set comes with one. If your set does not come with one, magnets are available separately (HO Item No. 78999; N Scale Item No. 78998).
5. Assemble the track by pushing together. Make sure the rail and joiners are seated properly. Be careful that the rail joiners do not slip under the rail without properly connecting. This can cause train derailments and electrical circuit interruptions.
6. After track is assembled, double-check for joint connection and fit by lightly running your fingers over the top of the rails in both directions.
7. If you detect bumps or distortion on the track surface, recheck the rail joiner fit.

Power Connections

1. Power supply and speed control are plug and play; no tools are needed.
2. Power is supplied to the track and the locomotive by the power supply, speed controller, terminal wire, and E-Z Track terminal/rerailer.
3. First – turn knob on the speed controller counterclockwise until it stops (all the way to the left).
4. Next – attach terminal wire to the speed controller by plugging it in where it says 'To Track'.
5. Then – plug terminal wire into the E-Z Track terminal rerailer. Firmly push connector onto the track terminals.
6. Finally – plug the connecting wire from the power supply into jack on the speed controller labeled 'IN'. Then plug power supply into a live wall outlet.
7. Some sets may come with a speed controller with two push button connectors. These are used to supply AC power to accessories.
8. To make positive and secure connections to these, push in buttons and insert each of the bare ends of the connection wire from your accessory.
9. The speed controller is capable of powering one accessory at a time.

Putting the Train on the Track

1. Put the locomotive on the track and run the wheels back and forth over the terminal Rerailer track.
2. When the wheels glide smoothly over the track, you know the wheels are all on the track. If your set comes with a tender, attach it to the locomotive.
3. Add the rest of the cars that come with your set by placing them on the track and running them back and forth over the terminal rerailer until they glide smoothly. Then gently push the cars together – they will engage automatically.
4. Do not try to connect cars when positioned over an under-track magnet.

How to Use E-Z Mate Couplers (HO and On30 Scale)

1. Your set may be equipped with E-Z Mate magnetically operated knuckle couplers that let you perform real railroad switching and yard operations.
2. Coupling two cars with E-Z Mate couplers is as easy as pushing them together when they are not over an under-track magnet.
3. Uncoupling occurs only when over an under-track magnet and when there is no tension between the cars.
4. To uncouple E-Z Mate couplers, stop two couplers directly over the under-track magnet. With no tension between the cars, the couplers will open automatically.
5. If cars will not couple, check to be sure cars are not positioned over the uncoupling magnet or parked on a curve.
6. If cars will not uncouple, check to be sure the couplers are positioned directly adjacent to the magnet position indicator and that the indicator is placed in line with the center line of the under-track magnet.
7. Check that the magnet is secured to the underside of the track and fitted with the steel plate provided.

How to Run Your Train

1. Turn the knob on the speed controller clockwise until it stops (all the way to the left).
2. Plug in the power supply.
3. Begin feeding power to the track by slowly turning the knob on the speed controller clockwise.
4. Observe the direction of your train.
5. If it moves backwards when the controls indicate forward, stop the train.
6. Then simply disconnect, flip, and reconnect the terminal wire to the terminal Rerailer track.
7. Remember – never leave your train running unattended!

Action Checklist (Troubleshooting If Your Train Doesn’t Run or Stops Running)

1. Is the power supply plugged in to a live receptacle?
2. Are the wheels on the track?
3. Is the wiring secure?
4. Is the track properly assembled?
5. Is the track properly seated in the rail joiner?
6. If your train stops or fails to start, a short circuit may be indicated. If this is the case, UNPLUG THE POWER SUPPLY IMMEDIATELY.
7. Common reasons for a short circuit: derailed wheels may cause a short. Check to make sure all wheels are on the track. Also check all connections and make sure there is no metal of any sort across the rails.
8. After checking everything carefully, resume operation.
9. Please note, your power supply is protected by a circuit breaker that automatically resets after a short circuit is corrected.
10. Allow up to 5 minutes for the circuit breaker to reset before resuming operation.

Keep Your Train in Top Operating Condition

1. Works better after couple hours of break-in time.
2. Train performs best under clean operating conditions.
3. Clean wheels and a clean track ensure good electrical contact.
4. After about every 8 hours of operation, wipe the track rails and exposed wheels with a soft, lint-free cloth.
5. Removal of black residue is normal.
6. Do Not Use Steel Wool To Clean Your Track.
7. Do not use common solvents, they may damage plastics - use track cleaner.
8. After 24 hours of use, light lubrication is required to keep train in top operating condition. Bachmann E-Z Lube or other hobby-grade lubricants are recommended.

Bachmann hopes you enjoy your train for many years to come!