14 best servo connectors
Servo connectors are essential components in the field of Remote App Controlled Vehicles (RC vehicles) and are widely used in the hobbyist and toy industry. These connectors play a critical role in connecting servos to the receiver and the power source, allowing for precise control of various vehicle functions.
Here are some key points about servo connectors in the context of RC vehicles and related hobbies:
Connector Types: Servo connectors come in different types and sizes to match various RC vehicles' needs. The most common connector types include JR connectors, Futaba connectors, and universal connectors. Each type has a specific design and pin arrangement, so it's important to choose the right one for your servo and receiver.
Compatibility: Ensuring compatibility between the servo connectors, servos, and receivers is crucial for proper operation. Mismatched connectors can result in poor connections or even damage to your equipment.
Wiring Configuration: Servo connectors typically have three wires: signal (usually white or yellow), power (red), and ground (black or brown). Properly connecting these wires is essential for the servo to function correctly. The signal wire carries the control signal from the receiver, while the power and ground wires provide voltage and return path for the servo's motor.
Extension Cables: Servo extension cables are also available, allowing you to extend the reach between your servo and receiver.These are handy when you need to place your servo in a location that's farther away from the receiver.
Y-Cables: Y-cables, or servo splitter cables, enable you to connect multiple servos to a single channel on your receiver. This is useful for controlling multiple functions with a single input, such as in the case of controlling both steering and throttle on an RC car.
Connector Maintenance: Regularly inspect and maintain servo connectors to ensure they are clean and free from dirt, debris, or corrosion. Dirty or damaged connectors can lead to signal interference and poor performance.
Safety: Always disconnect the power source when working on your RC vehicle's electrical connections, including servo connectors, to avoid accidental short circuits or damage.
In summary, servo connectors are vital components in the world of Remote App Controlled Vehicles and play a crucial role in ensuring precise and reliable control of servos. Choosing the right type, maintaining proper wiring, and ensuring compatibility are essential for a successful and enjoyable RC hobby experience.
Below you can find our editor's choice of the best servo connectors on the marketProduct description
Package included:
30 Sets Servo Plug
Features:
This product can be used to Plug various normal parts of RC Multirotor Quadcopter Helicopter Airplane Car.
It is compatible with Futaba and JR connector.
- Includes 30 Sets in one box. Easy to store
- It is compatible with Futaba and JR connector. Ideal for servo extensions DIY, repairing servo connectors.
- Material: brass and nickle plated. Low resistance
- Each set includes connector housing, protective connector housing and crimp pin connector.
- 2.54mm pin spacing
User questions & answers
Question: | Are these Futaba J connectors |
Answer: | It lays down flat or you can turn into a seat as shown in the picture, it has locks to secure it in place. |
Question: | Does this item ship from China or the United States |
Answer: | 8 lb |
Question: | Since each plug requires 3 pins each, male or female, I assume the kit comes with 90 male and 90 female pins |
Answer: | The yellow tough box included in the set will house a 22 piece bit set. |
Product description
Specification:
Pin Spacing: 2.54mm
Insulation material: PVC
Interface type: AC/DC
Feature: the fire/flame retardant
Application: apply to the computer
Circuits: 3
Package included:
There are 900 PCS(100 sets) Servo Connector and Male Female Crimp Pin Connector Kit
- 100% brand new, 900 PCS(100 sets) connectors, including connector housing, protective housing and male and female crimp pin.
- Circuits: 3
- Pin spacing: 2.54mm
- Each set includes connector housing, protective connector housing and crimp pin connector.
- Ideal for servo extensions DIY, repairing servo connectors.
User questions & answers
Question: | I have futaba servos. Will this kit work with them |
Answer: | The 192 piece set is the better set if you want more sockets and extensions. The 247 piece isn't really 247 if you take away all the little screwdriver bits. The only advantage to the 247 piece set is the wrenches, which the 192 piece set doesn't have. But the 192 piece set has more sockets and more extensions. If you want an all-around kit, the 247 piece is nice because you have the screwdriver set and the wrenches. But if you want a better kit of just sockets and ratchets the 192 is the better kit. |
Question: | What crimping tool is needed for these connectors |
Answer: | No , it can lay flat or fold into the z that is pictured but will not fold flat. |
Question: | Can these plugs be swapped out with current servo plugs while keeping the original servo pins? No crimping, just swap out the plastic plug piece |
Answer: | There is only one fixed position when the seat is locked. |
Question: | Do these plugs fit a spektrum receiver |
Answer: | Approximately 14.5" from the floor to the seat. |
Product description
Specification:
Pin Spacing: 2.54mm
Insulation Material: PVC
Interface Type: AC/DC
Contact Material: brass and nickle plated
Feature: the fire/flame retardant
Application: apply to the computer
Circuits: 3
Servo Wire Length: 5m/16.4inches
Package Content:
60 * Servo Connector
30 * Protective Connector Housing
30 * Male Crimp Pin Connector
30 * Female Crimp Pin Connector
5M * Servo Wire
- Servo extension wire connector kit, including connector housing, protective housing and male and female crimp pin, be applied for Futaba and JR servo.
- Circuits: 3
- Pin spacing: 2.54mm
- Each set includes connector housing, protective connector housing and crimp pin connector.
- Ideal for servo extensions DIY, repairing servo connectors.
Product description
* Crimping capacity: 0.1-1.0m㎡
* AWG: 28-18
* For 2.54mm 3.96mm KF2510 connector
* length :190mm
* weight :0.35kg
* Wire-electrode cutting Die sets makes the crimping more Accurate and precise
Official IWISS Counterfeit Warning: More and more frequently, counterfeit IWISS products are offered for sale through Internet or directly. Every authentic IWISS product comes with a lased IWISS logo, designed package and/or a QR code sticker on the box. IWISS team kindly remind you not to be tricked, and to report indecent selling outside Amazon IWISS exclusive store.
- Crimping capacity : 0.1-1.0m?, For 2.54mm 3.96mm KF2510 connector
- Dimensions : AWG28-18 Length : 190mm, Weight : 0.35kg. Note : Before use, please make sure that wire size meets the standard
- Open Barrel Terminals : The open barrel crimp tool is designed to crimp non-insulated, open barrel terminals, also known as OEM terminals. Wire-electrode cutting die sets promise a high-precision crimping result
- Compatible : Work with molex part 43030-0006 terminal connector
- Suitable : Good for ATX, EPS, PCIE and SATA power pins
User questions & answers
Question: | Will this crimp Delphi Weatherpack pins |
Answer: | Good days! This repair tool kit set is useful and essential tool for basic household repairs. Work perfectly for bike and excellently for car/trunk common repair too! Fit most of people. |
Question: | Will this crimper work with the jst- rcy connector |
Answer: | This set contains 62 sockets. You can view the list of whats included via our web site. |
Question: | Will it crimp molex .062 terminals |
Answer: | Yes, our manufacturing warranty would cover the tools. |
Question: | does this thing cut and dice carrots |
Answer: | Yes, the sockets may be attached to an impact. |
Product features
IWISS SN-28B MICRO TERMINAL CRIMPER TOOL
- Ideal for servo, drone, FPV, automotive & electrical wiring, SATA.
- High quality ratcheting mechanism provides a stable platform for crimping.
- Premium crimping results on JST, Dupont, Amphenol, Molex, AMP connectors.
Product description
Specification:
Pin Spacing: 2.54mm
Insulation material: PVC
Interface type: AC/DC
Feature: the fire/flame retardant
Application: apply to the computer
Circuits: 3
Package included:
400 PCS(50 sets) Servo Connector and Male Female Crimp Pin Connector Kit
- 100% brand new, 450 PCS(50 sets) connectors, including connector housing, protective housing and male and female crimp pin.
- Circuits: 3
- Pin spacing: 2.54mm
- Each set includes connector housing, protective connector housing and crimp pin connector.
- Ideal for servo extensions DIY, repairing servo connectors.
User questions & answers
Question: | Can i make ot to where i can connect 2 males into one |
Answer: | About 15 to 20 pounds |
Question: | How many different type connector |
Answer: | I used the knife to cut paper boxes. It is just a normal sharp knife that I use in my work life. I also use it as a replacement of my old knife. The blade is sharp enough to cut thin plastic sheets and the handle is easy to grab. It is really up to you on how to use it. |
Product description
【Specifications:】
- Quantity: 30 PCS
- Wire Type: 22AWG
- Connector Color: black
- Material: plastic + copper
- Cable Color: red, white and black
- Connectors: 3-pin male to female servo cable
- Wire Length: 10 cm/ 3.95 inch, 15 cm/ 5.9 inch, 30 cm/ 11.8 inch, 50 cm/ 19.7 inch and 60 cm/ 23.6 inch
【Features:】
1, These servo cable made with high quality 22 AWG wire, the contact material is pure copper, ensuring a firm connection every time.
2, These servo extension lead wires featured with 3 pins, and each has an angle, in case you will install incorrectly, convenient use design.
3, These servo extension lead wires can be applied for Futaba and JR Servo, remote control car, plane, helicopter and drones servo connection or receiver connection.
【Package Included:】
<1> 10 cm Long servo cable connector-----------------6 Pieces
<2> 15 cm Long servo cable connector-----------------6 Pieces
<3> 30 cm Long servo cable connector-----------------6 Pieces
<4> 50 cm Long servo cable connector-----------------6 Pieces
<5> 60 cm Long servo cable connector-----------------6 Pieces
【Total: 30 Pieces 3-Pin Extension Cable Cord Male to Female Lead Wire Connectors】
- 【HIGH QUALITY】--- Made with high quality 22 AWG wire, the contact material is pure copper, ensuring a firm connection every time, which can ensure long time using.
- 【SIZES】--- 5 different lengths of 10 cm/ 3.95 inch, 15 cm/ 5.9 inch, 30 cm/ 11.8 inch, 50 cm/ 19.7 inch and 60 cm/ 23.6 inch, each length has 6 pieces servo extension cords, different sizes can meet your different needs.
- 【DESIGN】--- the connector of these wires are style connector with 3 pins, featured with female connector on one side and male connector on the other side, can be connected to the receiving set and steering engine, and it has an angle, in case you will install incorrectly, very convenient.
- 【PACKAGE】--- This package includes 30 pieces of female to male servo extension cable, 5 different lengths and each length has 6 pieces, enough for you to use, different length can meet your different needs.
- 【WIDE APPLICATIONS】--- These servo extension leads can be applied for Futaba and JR servo, plane and helicopter servo connection or receiver connection, remote control car, RC Car. The kit has lots of different sizes, which can meet the maximum of requirement for you.
Product description
Item: Linkage Stoppers D1.3mm
Package Include:
25xLinkage Stoppers D1.3mm
1 x hex wrench
Features:
Diameter of the Hole:1.3mm
Suitable for Pushrods 1.0 / 1.1 / 1.2 / 1.3mm
Only work for linear movement, not on servos
Compatibile with:RC Airplane
Note:Check your specific model's manual for compatibility,or Contact us.
- Diameter of the Hole:1.3mm Compatible with Pushrods 1.0 / 1.1 / 1.2 / 1.3mm
- Net Weight:Approx 0.7g/pc
- Pack of 25pcs Push Connectors +1 Piece hex wrench
User questions & answers
Question: | May I ask where (country) this product is manufactured |
Answer: | Yes, it includes 90 male and 90 female pins |
Question: | What is the metalic composition of the linkage stopper |
Answer: | No there are no hinges, It is one piece. However, it plastic so it would easy to separate each section. |
Question: | How many actual connectors are included? It says 25 pcs, but each connector is 5 pcs. So only 5 connectors |
Answer: | They are metric and imperial, but you will not be able to put them in order on these holes. Very inaccurate sizes. |
Question: | What size is the alen head? I lost mine |
Answer: | Hammer in not included |
Product description
Specification:
Pin Spacing: 2.54mm
Insulation Material: PVC
Interface Type: AC/DC
Contact Material: brass and nickle plated
Feature: the fire/flame retardant
Application: apply to the computer
Circuits: 3
Servo Wire Length: 5m/16.4inches
Package Content:
60 * Servo Connector
30 * Protective Connector Housing
90 * Male Crimp Pin Connector
90 * Female Crimp Pin Connector
5M * Servo Wire
- Servo extension wire connector kit, including connector housing, protective housing and male and female crimp pin, be applied for Futaba and JR servo.
- Circuits: 3.
- Pin spacing: 2.54mm
- Each set includes connector housing, protective connector housing, crimp pin connector and servo wire, ideal to make your own several extension wires.
- Ideal for servo extensions DIY, repairing servo connectors.
Product description
Specification:
Number of needles: 3 needles.
Length: 1m.
Packing quantity: 5 PCS servo extension cord.
Feature
Made of high-quality materials, durable and long service life.
The servo cable has a female connector on one side and a male connector on the other side, which can be connected to the receiving device and the steering engine.
A connector with 3 pins, if you install it incorrectly, please tilt it at an angle for ease of use.
Can be used for RC airplane, and the servo connection or receiver connection of helicopter.
- Made of high-quality materials, durable and long service life.
- The servo cable has a female connector on one side and a male connector on the other side, which can be connected to the receiving device and the steering engine.
- A connector with 3 pins, if you install it incorrectly, please tilt it at an angle for ease of use.
- Can be used for RC airplane, and the servo connection or receiver connection of helicopter.
- Number of needles: 3 needles. Length: 1m. Packing quantity: 5 PCS servo extension cord.
Product description
Ideal accessories for RC Servo.
Widely used on Futaba JR Servo,RC Car,RC helicopter,trucks, airplanes,High-Tech, and FlySky receivers and servos
Package Includes
10 X 300mm/12In Servo Cable for Futaba JR Servo.
- Male to Female RC Servo Extension Lead Wire
- 300mm/12In Futaba Servo Extension Lead Wire
- Used for Futaba JR Servo,RC Car, plane and quadcopters,tricopters,helicopter servo connection or receiver connection.
- Aslo for debug UART build,FPV Quad build
User questions & answers
Question: | Will these extension support an esc |
Answer: | it is perfectly compatible with Futaba connectors |
Question: | Is a universal cables |
Answer: | ship from the United States |
Product description
QLOUNI 620Pcs 2.54mm Pitch JST Connector
QLOUNI JST SM Pins tool -- High Quality Connector
Dupont Crimp Pin Connector is made of durable plastic and metal, tin plating, internal pure copper to increase the conductivity, the surface coating antioxidant, increase the life.
QLOUNI Male / Female Pin -- Variety Complete
1x 1 pin Plug Housing x 50 pcs
1x 2 pin Plug Housing x 40 pcs
1x 3 pin Plug Housing x 20 pcs
1x 4 pin Plug Housing x 20 pcs
1x 5 pin Plug Housing x 20 pcs
1x 6 pin Plug Housing x 20 pcs
2x 2 pin Plug Housing x 10 pcs
2x 3 pin Plug Housing x 10 pcs
2x 4 pin Plug Housing x 10 pcs
2x 5 pin Plug Housing x 10 pcs
2x 6 pin Plug Housing x 10 pcs
200PCS Male Pin Crimp Terminal
200PCS Female Pin Crimp Terminal
All kits are in a transparent box for storage and carry
- [Dupont Connectors Kit] 620 pcs male and female JST SM connectors assortment kit by QLOUNI for DIY project
- [Pin & Pin Pitch] JST SM 1 / 2 / 3 / 4 / 5 / 6 pin terminals, 18-26 AWG wire, Pin Pitch: 2.54mm
- [Easy to Use] Just put the crimps in the tool and press them, make the crimp the insulation are all the way toward the wire
- [Use Range] Compatible with Arduino and breadboard style pin connectors and sockets, like 3d printer boards etc.
- [Delivery] 200 pcs female crimp pins; 200 pcs male crimp pins; 10 pcs 2x5p, 10 pcs 2x4p, 10 pcs 2x3p, 10 pcs 2x2p, 20 pcs 1x6p, 20 pcs 1x5p, 20 pcs 1x4p, 20 pcs 1x3p, 40 pcs 1x2p, 50 pcs 1x1p
User questions & answers
Question: | Can someone tell me the exact measurements of the connectors? I am mostly interested on the flat five and six pins connectors |
Answer: | Yes they do make them for futaba.if you get the JR you would have to trim the little tab from the side of the servo plug. I have done that and it works |
Question: | Where would I find 50 pieces of one type? I only need the 1x4 pin housings |
Answer: | Iwiss XH2.0mm XH2.54mm XH3.96mm... https://www.amazon.com/dp/B00YGLKBSK?ref=yo_pop_ma_swf This one worked great! Did several servos and esc’s. |
Question: | Where can I find the spec sheet for these connectors |
Answer: | Yes, if you take like a pin or point of a exacto knife, you can gently pry it up and the pin will slide out, and you can just slide in the new pin |
Question: | could you just plug in two ends of a 4pin leds into this and would it work |
Answer: | They DON'T fit my Spektrum AR8010T. These aren't truly Hitec/JR. They measure .305 inch in width. Hitec are .297" - .300 inch. In order to fit this receiver, you'd have to do some sanding. I'm considering returning these because they don't work unless you modify them. Plus the plastic box arrived with a corner shattered. I know that's not Amazon's fault- just adds insult to injury. |
Product features
QLOUNI 620Pcs 2.54mm Pitch JST SM 1 2 3 4 5 6 Pin Housing Connector
Package includes:
1x 1 pin Plug Housing x 50 pcs
1x 2 pin Plug Housing x 40 pcs
1x 3 pin Plug Housing x 20 pcs
1x 4 pin Plug Housing x 20 pcs
1x 5 pin Plug Housing x 20 pcs
1x 6 pin Plug Housing x 20 pcs
2x 2 pin Plug Housing x 10 pcs
2x 3 pin Plug Housing x 10 pcs
2x 4 pin Plug Housing x 10 pcs
2x 5 pin Plug Housing x 10 pcs
2x 6 pin Plug Housing x 10 pcs
200PCS Male Pin Crimp Terminal
200PCS Female Pin Crimp Terminal
All kits are in a transparent box for storage and carry
Product description
Specification:
Pin Spacing: 2.54mm
Insulation material: PVC
Interface type: AC/DC
Contact material: brass and nickle plated
Feature: the fire/flame retardant
Application: apply to the computer
Circuits: 3
Package included:
Each kit includes:
As the second picture shows.
There are 900 PCS(100 sets) Connector and Male Female Crimp Pin Connector Kit
- 100% brand new, 900 PCS(100 sets) connectors, including connector housing, protective housing and male and female crimp pin.
- Circuits: 3Pin
- Pin spacing: 2.54mm
- Each set includes connector housing, protective connector housing and crimp pin connector.
- Ideal for servo extensions DIY, repairing servo connectors.
User questions & answers
Question: | Are these Gold Pins or are they stainless steel |
Answer: | This don't work for Delphi Weatherpack pins. |
Question: | Do these connect male to male |
Answer: | Yes. |
Question: | do they have the gold coating |
Answer: | I am not 100% certain. If the wire gauge is within the range of the crimper, (Molex .062 are 18-30 gauge) it should crimp them well. The design of the molex terminals is very similar to what I had to crimp and I had excellent results. |
Question: | Are these connectors keyed? Some servo plugs have a small flat spot that sticks out that indicates the signal side |
Answer: | No. This plier is a crimping tools, not cut tools. |
Product description
Apex RC Products is a company of radio control hobby enthusiasts that creates and carries products we use ourselves. All of our products are high quality at a great value.
Apex RC Products 10 Male / Female JR / Hitec Style Servo Connectors #1505
- Includes 10 Sets Of Connectors - 10 Male and 10 Female
- As good as or better than OEM JR Style Connectors!
- Great For Making Your Own Servo Extensions or Repairing Servo and ESC Connectors
- 2.54mm Pin Spacing
User questions & answers
Question: | Are these pins plated like the picture shows |
Answer: | 25 individual connectors |
Question: | What size crimping tool do you need |
Answer: | Not sure but any metric allen key set I believe has the required size. Take one int your local hardware store and test fit it |
Question: | Will this plug into the spektrum ar610 jr receiver |
Answer: | the black body you can use male or female pins . the pins make the gender you need the tool to crimp the pins but it is very dificult to make up the conectors. |
Question: | Are these connectors compatible with Airtronics Z connectors |
Answer: | They are all of the same 'Type'. There is enough pieces to make 50 complete connections. |
Product description
Apex RC Products is a company of radio control hobby enthusiasts that creates and carries products we use ourselves. All of our products are high quality at a great value.
- INCLUDES - 15 Feet Servo Wire, 10 Male Connectors & 10 Female Connectors - Makes 10 Servo Extensions
- As good as or better than OEM JR Style Connectors
- 2.54mm Pin Spacing
- 22awg High Quality Super Fleixble Silicone Wire
- Tri-Color For Easy Wire Identification
User questions & answers
Question: | what model # iwiss crimping tool needed for these |
Answer: | Yes they are. |
Question: | Are the pins gold-plated? if not, do you offer |
Answer: | Do not know, but the price is right and high quality. Best guess is China. |
Question: | Do you have to solder them |
Answer: | plated metal |
Latest Reviews
View all
Travel Hair Dryer With Diffusers
- Updated: 11.05.2023
- Read reviews

Razor Of New Orders
- Updated: 16.05.2023
- Read reviews

Corn For Deer Feed
- Updated: 28.03.2023
- Read reviews

Presents For Men
- Updated: 17.01.2023
- Read reviews

Digital To Analog Tvs
- Updated: 17.04.2023
- Read reviews