14 best rc crawler kits

Product description

The Gen8 is Redcat’s first vehicle to be completely designed and developed, in house, in the United States. The Gen8 has rapidly taken the RC marketplace by storm. What about those who want to use the Gen8 chassis, but would rather install their own electronics, body, wheels, and tires? That's where the Gen8 PACK comes into play. With custom builders making up a large percentage of the RC crawler community, We wanted to offer something this community could really get excited about. We at Redcat are now offering the Gen8 P-A-C-K (Pre-Assembled Chassis Kit), for those who want to run the Gen8 chassis with their own choice of electronics, wheels, tires, and body. The Gen8 PACK already includes many of the features custom builders look for, and is ready to be transformed into a high performance, one of a kind, custom rig. The Gen8 PACK uses the same chassis that makes the Gen8 International Scout II RTR vehicle so great. The Gen8 PACK is a highly competitive professional rock crawler chassis that includes many high performance design features, such as: C-channel frame rails, low center of gravity battery tray, centrally mounted divorced transfer case, lockable slipper clutch, portal axles with metal gear covers, MOD-1 gears, machined aluminum spools, front CVAs, 32 rubber-sealed ball bearings, threaded aluminum shocks, 47º steering blocks with proper Ackerman, Panhard bar, LED-ready bumpers, winch-ready front bumper, and frame mounted floor pans. The Gen8 PACK uses portal axles with 47º of steering to help the vehicle maneuver tight spaces. The additional ground clearance offered by the portal axles allows the Gen8 to roll over obstacles, that might normally hang up other vehicles with traditional axles. The Gen8’s portal axles are outfitted with MOD1 gears for increased durability. Machined aluminum spools are used to ensure, that both, the left and right tires have equal pulling power. Aluminum Panhard bars are used to keep the portal axles from shifting side to side. This setup has proven to be a very effective combination, both on the trail, and on the rocks. Portal axles provide more ground clearance without the need for big tires. On the GEN8 PACK, much of the gear reduction happens inside the portal axles, which means less chassis torque twist than traditional axle shaft driven rock crawlers. The innovative dual design slipper clutch allows the driver to set the slipper clutch to the desired tension, or completely lock it out. Locking out the slipper clutch is simple, just remove the slipper pads and springs, then reassemble. The GEN8 PACK includes Mod 1 gears in the transmission, transfer case, and portal axles. As mentioned above, the Gen8 chassis uses a divorced transfer case. There are several advantages to this setup, such as an even distribution of the weight along the centerline of the vehicle, while allowing for a very low center of gravity. This is noticeable on the trail and when attacking aggressive slopes sideways. The divorced transfer case also allows the battery to be seated lower in the chassis. This too, keeps the center of gravity low, but also creates room for a custom built cockpit. This is sure to be a huge selling point for the true-to-scale custom builders out there. Custom builders will be excited to know they can purchase the Gen8 PACK and install a motor, speed controller, radio system, steering servo, battery, wheels, tires, and body of their choice; all of which are not included with the PACK. This is a great way for drivers to create custom rigs of their own, using the new Gen8 chassis as a base. For builders looking to completely customize their Gen8 PACK, Redcat has released an ever growing collection of FREE 3D printable parts files specifically for the Gen8/Gen8 PACK. These files are available for download at thingiverse/RedcatRacing/designs. In addition to 3D printable parts, there are also many performance parts available for the PACK on the Redcat Racing website, including machined aluminum parts. Tuning options include: nine upper shock positions, threaded shock collars for quick suspension tuning, adjustable front toe angle, adjustable frame mounted bumpers to fine tune approach and departure angles, adjustable slipper clutch with lockout option, adjustable lower suspension link angle, and an adjustable wheelbase, from 312mm - 336mm. The PACK’s adjustable wheelbase is a great way to tweak performance, as well as opening up possibilities for different body styles with varied wheelbase lengths. Now drivers can find a body they like and adjust the vehicle's wheelbase to fit that body, within reason of course. The Redcat Racing Gen8 PACK is a great choice for anyone looking for high performance professional rock crawler chassis, they can add their own electronics, body, wheels, and tires too.

• Portal axles, Divorced transfer case, High strength 1.5mm C-Channel chassis rails, 4-Link suspension, Aluminum threaded shocks, Functional 1.9 beadlock wheels, CNC machined spools, Metal wheel hexes, Rubber sealed ball bearings throughout, 47º precision steering, Panhard bar, Front of chassis motor mounting location (motor not included), Shackle mount bumpers (LED ready), Plastic floor pan
• Adjustable wheel base, Adjustable ride height, Adjustable toe angle, Multiple shock positions, Adjustable approach and departure angle, Tunable suspension, Lockable adjustable slipper clutch, Many upgraded parts available, Many 3D printable parts available
• Build it the way you want it, Choose your own body, Choose you own wheels/tires, Choose you own radio system, Choose you own steering servo, Choose you own motor and ESC, Choose you own battery
• Requires: Motor, ESC, steering servo, Radio system, Battery, Body, Wheels, Tires

User questions & answers

Question:	are the parts bumpers, shocks mounts, etc plastic or metal
Answer:	Frame rails are metal, so it the motor mounting plate. Metal gears and ball bearings throughout with the exception of the spur gear. Shock bodies are aluminum, the rest is plastic.
Question:	The first bullet point in the description says it includes funcional beadlock wheels. Do those come separately or are they in the box
Answer:	Good catch in the description, but it does NOT come with any wheels of any kind. This is just the chassis already assembled. You will need to supply a body, wheels, speed control, servo, battery and a motor with a 32 pitch pinion.
Question:	Will the vatterra suburban body fit this
Answer:	Yes
Question:	Wheelbase adj is 312-336 so it fits the trx
Answer:	yes, ,but mounts are different

Product description

Create your own custom scaler!

Start with your favorite radio control scale trail chassis – the Axial SCX10 II. Top it off with your choice of body, tires, and wheels (all sold separately). Now you've got a custom rig with proven performance and a look that's all yours: the Axial SCX10 II Raw Builder's Kit!

The SCX10 II Builder's Kit lets scale trail enthusiasts aviod the technical hurdles of scratch-building and instead focus their attention on other things, like visually personalizing their rig. It retains the essence of Axial's original SCX10 builders kit and metal frame rail chassis - but adds scale AR44 high pinion axles, a chassis-mounted servo, redesigned transmission, front mounted battery tray, all aluminum suspension links, suspension designed for nearly zero bump steer, and more. It has all of the chassis features of the current SCX10 II platform, without body, wheels, and tires, so you can customize.

AX10 Transmission

• Scale looks on the outside - strong, all-metal Axial gears on the inside!
• Mimics a real transmission with bell housing, oil pan, and 4X4 transfer case
• 56T spur gear and 15T pinion - 32-pitch for durability
• Final drive ratio (FDR) 40.44 with a range from 33.69 - 54.15
• Efficient driveline with improved driveshaft angles to reduce stress on moving parts
• Includes a full set of ball bearings

AR44 Single Piece Axles

• Single piece axle housing for strength
• Small pumpkin for increased clearance and scale realism
• Optimized gear ratio (3.75) for reduced torque twist
• High pinion gears for added ground clearance, better driveshaft angles, and increased durability

CMS (Chassis Mounted Servo)

• Servo is moved from the top of the axle onto the chassis, just as a full-size truck's steering box is located on the frame
• Enhances scale looks with proper suspension geometry
• Anodized aluminum links included with M4 rod ends
• Adjustable servo mounting system allows a wide range of servos to be used
• Properly designed suspension for nearly zero bump steer

All Aluminum Suspension Links

• All links are metal, including the steering
• 4-Link rear suspension geometry reduces axle steer and torque twist
• Custom tapered center - flared ends design
• Large M4 rod ends
• Gray anodized aluminum

Includes:

• Axial SCX10 II Raw Builders Kit

Requires (Sold Separately):

• Radio System: 2-3 channel
• Steering Servo: High-torque
• Motor: Brush equipped, water resistant
• ESC: To match selected motor
• Battery: 6-cell NiMH or 2S LiPo
• Battery Charger: To match selected battery
• Wheels: 1.9" off-road with 12mm hex (such as Axial Method 1.9")
• Tires: All-terrain
• Body: 1/10 scale
• LiPo charging bag (if using LiPo battery)
• Track equipment

• Create your own custom radio control scaler, starting with proven performance of the SCX10 II chassis
• Features AX10 transmission, AR44 single pieces axles, chassis mounted servo, and all aluminum suspension links
• Top it off with electronics and your choice of body, tires, and wheels (all sold separately) for a custom rig
• Includes: Axial SCX10 II Raw Builders Chassis Kit
• Requires: Radio System (2-3 Channel), Steering Servo, Motor, ESC, 6C NiMH or 2S LiPo Battery, Charger, Tires, Wheels, Body, Charging Bag and Track Equipment

User questions & answers

Question:	does it come assembled
Answer:	Yes, it comes fully assembled like you see it in the pictures. It actually comes in a factory axial box. Not just a regular brown box.
Question:	does it come with the gears for the motor
Answer:	Yes
Question:	Could i use this kit for a rally car set up instead of a crawler
Answer:	I wouldn’t recommended it honestly it has super low gears it’s not very fast even if you put a big motor.
Question:	Does it have a deans plug
Answer:	This is just the builders KIT, it does not include electronics. You would have to purchase a esc, a motor, a servo, a battery, and a rx/tx to have every else needed. It does NOT come with electronics or a body

Product features

Axial SCX10 II Raw Builder's Scale Trail RC Chassis Kit

Start with your favorite scale trail chassis - the Axial SCX10 II. Top it off with electronics and your choice of body, tires, and wheels. Now you’ve got a custom rig with proven performance and a look that’s all yours: the Axial SCX10 II Raw Builder’s Kit!

In 2008 Axial introduced its first SCX10 as a builder’s kit that avoided the technical hurdles of scratch-building. Scale trail enthusiasts could focus their attention on other things, like visually personalizing their rig. The SCX10 chassis platform proved to be a highly effective driving machine. Standout features included an all-metal twin C-channel frame, solid transmission, and axles with realism and capabilities to match.

With the SCX10 II, Axial kept the essence of the SCX10 and its metal frame rail chassis, but added scale AR44 high pinion axles, a chassis-mounted servo, redesigned transmission, front mounted battery tray, all aluminum suspension links, suspension designed for nearly zero bump steer, and more.

These are some of the features that make the SCX10 II optimized for performance. Now, with the Raw Builder’s Kit version, you can drive a machine that’s as personal as it is capable!

AR44 Single Piece Axles

• Single piece axle housing for strength
• Small pumpkin for increased clearance and scale realism
• Optimized gear ratio (3.75) for reduced torque twist
• High pinion gears for added ground clearance, better driveshaft angles, and increased durability

AX10 Transmission

• Scale looks on the outside strong, all-metal Axial gears on the inside!
• Mimics a real transmission with bell housing, oil pan, and 4X4 transfer case
• 56T spur gear and 15T pinion 32-pitch for durability
• Final drive ratio (FDR) 40.44 with a range from 33.69 - 54.15
• Efficient driveline with improved driveshaft angles to reduce stress on moving parts
• Includes a full set of ball bearings

AR44 Universal Axle Set

• Universal joint axles allow up to 45 degrees of steering and provide smoother action for a higher performing, efficient drivetrain
• Hardened steel construction

CMS (Chassis Mounted Servo)

• Servo is moved from the top of the axle onto the chassis, just as a full-size truck's steering box is located on the frame
• Enhances scale looks with proper suspension geometry
• Anodized aluminum links included with M4 rod ends
• Adjustable servo mounting system allows a wide range of servos to be used
• Properly designed suspension for nearly zero bump steer

Product description

Prevail on any trail. axial’s 1/10 scale truck kit for experienced RC drivers features the unrelenting SCX10 II chassis with an aggressive forward cab body with many military-inspired scale features. It has a full-scale truck's aggressive approach and departure angles and includes military-style 1. 9 MW19 bead lock wheels and 1. 9 MT45 tires, as well as a functional spare tire. Produced in kit form, It gives you the freedom to customize and add your preferred radio and electronics (both sold separately) for a Trailblazing machine that's all your own. an optional 2-speed gear set (ax31440) is available separately For builders who'd like to install a functional low/high speed transmission. An additional servo for the shifting fork is also required. new, realistic body design scaled after forward cab military style trucks plenty of locations for mounting LED lighting included options for customizing interior details> new rear Cage hinged design allows easy access to interior components> optional 2-speed gear set provides a functional low/high transmission when paired with optional servo SCX3 10 transmission mimics a Real transmission and includes full ball bearings and metal gears> chassis mounted servo for scale looks and close to zero bump steering AR44 single piece axle with high Pinion gear Set For a much lower gear ratio new military-style MW19 bead lock wheels and MT45 tires, including a functional, mounted spare all aluminimum suspension links> adjustable battery tray WB8 HD wildboar 3-piece driveshaft's with updated design and larger diameter> waterproof receiver box high strength, c-channel frame rail chassis includes: Axial SCX10 II umg10 RC rock crawler kit (unassembled) product manual needed to complete: 2 or 3 channel Surface radio system's> steering servos> ESC with on/off switch 540 size motor> 2-cell lipo or 6-cell NiMH battery> appropriate battery charger> polycarbonate paint for car body AA batteries (may be required for transmitter> miscellaneous tools (see manual for more information)

• 1/10 scale RC rock Crawler kit with rugged off-road performance and impressive climbing ability over rocks and rough terrain.
• Military-inspired forward-cab body and aggressive approach angle attacks steep inclines with ease.
• Primed for performance with Axial proven ax10 transmission, WB8 HD wildboar driveshaft's, AR44 single piece axle, dual slipper clutch, and more.
• Scale details include molded plastic mirrors, snorkel, door handles, windshield wipers, and functional MT45 Spare tire mounted on MW19 bead lock wheel.
• Complete the kit with your favorite radio and electronics (all sold separately) and prevail on any trail.

User questions & answers

Question:	What’s the wheelbase
Answer:	11.4"/288mm. Is is Axial's short wheelbase.
Question:	Is it hard to put together
Answer:	More difficult build than most other builds but am very happy with the kit. Although, quality control missed a couple minor parts that I didn't need cause I bought aftermarket shocks anyways.
Question:	Does it come RTR
Answer:	No, it’s a roller. You’ll need a radio, ESC, motor, and steering servo. But that’s all the things that usually get replaced and upgraded anyway.
Question:	Does it come with a gear to put on the motor
Answer:	Yes, it has a 15t pinion for the motor

Product features

Axial SCX10 II UMG10 4WD RC Rock Crawler Electric Unassembled Off-Road Kit

Axial introduces a 1/10 scale truck kit for experienced drivers that features the unrelenting SCX10 II chassis with an aggressive forward cab body. Trick out the kit to your personal specs - an optional 2-speed gear set is also available - and prevail on any trail!

Features:

• Kit completion level gives experienced drivers the ability to customize the vehicle with their favorite equipment
• New, realistic body design scaled after forward cab military style trucks
• Plenty of locations for mounting LED lighting
• Included options for customizing interior details
• New rear cage hinged design allows easy access to interior components
• Optional 2-speed gear set provides a functional low/high transmission when paired with optional servo
• SCX10 transmission mimics a real transmission and includes full ball bearings and metal gears
• Chassis mounted servo for scale looks and close to zero bump steering
• AR44 single piece axle with high pinion gear set for a much lower gear ratio
• New military-style MW19 beadlock wheels and MT45 tires, including a functional, mounted spare
• All aluminimum suspension links
• Adjustable battery tray
• WB8 HD Wildboar 3-piece driveshafts with updated design and larger diameter
• Waterproof receiver box
• High strength, C-channel frame rail chassis

AR44 SINGLE PIECE HI-PINION AXLES

The AR44 axle features a high pinion gear set for a much lower gear ratio than most cars, plus a smaller pumpkin and added strength. The gear set overcomes the torque twist often associated with smaller gear sets. The axle itself retains the durability associated with the SCX10, despite being delivered in a smaller axle housing.

• High pinion gears for added ground clearance and better driveshaft angles
• High pinion design increases gear surface contact for greater durability
• Larger load bearings around the gear set reduce flex and strengthen the drivetrain
• Single piece axle housing adds strength
• One-piece all-metal locker front and rear
• Small pumpkin for increased clearance and a more scale look
• Optimized gear ratio reduces torque twist

CAB FORWARD BODY DESIGN

The kit comes with a realistic, military based, cab forward body. The aggressive approach angle created by its front end design enables the UMG10 to take on steep inclines. It's 11.4" (288mm) wheelbase helps with agility in challenging terrain.

NEW REAR CAGE DESIGN

Features a spare tire carrier and hinge design that allows easy access to the battery and on-board components. The body and cage are bolted together. The hinge at the rear of the chassis will tilt the body and cage up and out of the way.

INTERIOR DETAILS

Detail your UMG10 kit's interior with the parts provided. Choose from three hat styles for the driver's plastic molded head. Shift levers, a steering wheel, and a variety of decals are also included.

LED MOUNTING

A total of eight mounting locations for LEDs are found throughout the vehicle. Four lights can be mounted in the front grille, two in the front bumper, and two in the rear frame plate. (LED lights are not included)

CHASSIS MOUNTED SERVO (CMS)

For scale looks, Axial moved the servo off the top of the axle and onto the chassis, just as a full size truck has its steering box located on the frame. The front suspension design comes as close as possible to zero bump steer, to help give you the best driving experience possible.

• Scale looks with proper suspension geometry
• Anodized aluminum links included with M4 rod ends
• Adjustable servo mounting system allowing a wide range of servos to be used
• Properly designed suspension for nearly zero bump steering

1.9 MW19 BEADLOCK WHEELS

The UMG10 kit features a full set of 1.9 MW19 beadlock wheels, along with a spare mounted on the back of the truck – five in total. It's a three piece wheel design, utilizing six screws which help the wheel firmly grip the MT45 tires. The wheel nut cap resembles a receptacle for a simulated central tire inflation system. The wheels are molded in black plastic and feature a standard 12mm wheel hex hub.

1.9 MT45 TIRES

Keeping the truck on course and climbing difficult terrain are a set of MT45 tires molded in our sticky R35 compound rubber. The big block symmetrical tread pattern provides plenty of grip for climbing steep obstacles.

• 4.6" x 1.4" / 1.9 (117mm x 35.6mm)
• R35 compound

DUAL SLIPPER CLUTCH

Dual slipper design uses a pad on each side of the spur gear for added surface area. This allows for more precise tuning and holding power. The spur gear features strong, 32 pitch gearing for high torque applications.

• Slipper design uses a pad on each side of the spur gear for added surface contact area
• More precise tuning and holding power
• Strong 32P gear pitch for high torque applications

• Two version are optional (A: with wheels B: without wheels)
• Steel frame rails adjustable wheelbase
• Injection molded nylon axle housing, Steel internal gears and driveshaft, durable in use
• Lower the center of gravity forward, make RC Crawler more stable

User questions & answers

Question:	What pitch are the pinion and spur gears
Answer:	32p
Question:	what axles are shaft are in the axle
Answer:	Not the same as the scx10. Scx10 is rectangular into the diff these are perfectly square. Now scx10 axle shafts will work but you have to modify them to squares
Question:	What is the wheel hex size
Answer:	12mm
Question:	Does it come with a battery and charger
Answer:	No battery no charger

Product features

Version A:with Wheels

Up to 45 degrees of steering

Smooth action for an efficient drivetrain

Compact yet durable design

Hardened steel construction

Version B:with Wheels

Up to 45 degrees of steering

Smooth action for an efficient drivetrain

Compact yet durable design

Hardened steel construction

Length & Wheelbase

Wheelbase:12.3inch(313mm)

Length:17.1inch(435mm)

Width

Width:226mm/8.9 inch

Durable Frame

Steel frame rails

Adjustable wheelbase

C-Channel frame can be used to hide wiring

Well Made Gearbox & Motor

Exquisite workmanship, smooth and durable complete gearbox

with gear

35T motor provide great power

120mm 1.9 Crawler Tires & Wheels

INJORA 120mm tires & wheels offering great grip on dirt,mud,rock

Well Made Axle

Upgrade gear & drive shaft

Injection molded nylon axle housing

Product description

Axial Capra 1. 9 Unlimited 4WD RC Rock Crawler Trail Buggy Unassembled Chassis Kit. Radio, Battery, Charger, and Electronics are all sold separately.

• Unassembled, radio control trail buggy chassis kit designed for advanced RC drivers and engineered for cutting-edge rock crawling
• Currie F9 portal xxles with metal gears and ball bearings add substantial ground clearance at diff pumpkin while providing excellent 7. 39: 1 gear ratio
• Newly designed Dig transmission lets you switch from 4WD to FWD directly from your 3-channel transmitter to lock rear axle for a tighter turning radius
• Scale detail: roof-mount LED light bar, realistic interior, molded plastic front grille, clear headlight lenses and light buckets (LEDs not included)
• REQUIRES (not included): Radio System, Steering Servo, ESC, Motor, Battery, Charger, Micro Servo for Dig, 1. 9 Mounted Tires, Paint for Body

User questions & answers

Question:	Is this waterproof
Answer:	This is an unassembled kit with no motor, esc, servos and radio gear included. Its up to you to install waterproof electronics. Why would you want to run it in water anyways?
Question:	How come ic3 battery connection? no one makes a lipo with ic3 connnection, most are xt60. and no one makes an adaptor for ic3 to xt60. what to do
Answer:	Buy a battery with no connector and solder on a ic3.
Question:	Would a hobbywing 540 can axe combo work in this
Answer:	Yes it can. Space is tight in the chassis so keep that in mind while installing.
Question:	Is there anywhere on the front and rear for a bumper wirh wench
Answer:	There are winch mounts available and more custom parts come out everyday.

Product features

Axial Capra 1.9 Unlimited 4WD RC Rock Crawler Trail Buggy Unassembled Chassis Builder's Kit

The Axial Capra 1.9 Unlimited Trail Buggy Builder's Kit is a "new from the ground up" design that any advanced RC enthusiast eager for cutting-edge crawling will appreciate. Its Currie F9 Portal Axles provide extra ground clearance at the diff pumpkin for the best crawling performance. With the included Dig transmission, you can also switch on the fly between 4WD and FWD directly from your 3-channel transmitter - locking the rear axle whenever you need the tighter turning radius of front drive power. The Capra features a realistic tube chassis design and metal gears everywhere, from the center transmission to the lockers and portal axles. It rides on licensed Raceline 3-piece molded beadlock wheels that can be fitted with whatever 1.9 tires you prefer. For pioneering performance in an RC trail buggy kit, choose the Axial Capra.

Features:

• Newly designed transmission with Dig function enables a tighter turning radius by locking the rear axle for FWD power only
• Currie F9 Portal Axles increase ground clearance at the diff pumpkin for the best crawling performance
• Includes all-metal gears, from the center transmission to the lockers and portal axles
• Tube chassis design offers optimum clearance plus realistic scale looks
• All pivot points are on stainless steel balls for a durable, long-lasting suspension point
• Includes injection-molded, 3-piece, licensed Raceline beadlock wheels
• Adjustable oil-filled shocks feature hard anodized, threaded shock bodies, a single coilover spring, and a cap with a bleed port
• All-metal front universal axles provide smooth action and 45 degrees of steering angle for an efficient, high-performance drivetrain
• Durable, machined aluminum universal
• Finely tuned suspension geometry delivers the best crawling capabilities

CURRIE F9 PORTAL AXLES

The Currie F9 Portal Axles add substantially more ground clearance at the diff pumpkin while also providing an excellent 7.39:1 gear ratio. Completely ball bearing driven, and metal gears throughout for durability.

HI-PINION GEARS

The ring and pinion gears are machined steel, including the locker. The design utilizes a six bolt design for durability.

UNIVERSAL AXLE SET

Universal joint axles allow up to 45 degrees of steering and provide smoother action for a higher performing, efficient drivetrain.

• Up to 45 degrees of steering
• Smooth action for an efficient drivetrain
• Compact yet durable design
• Hardened steel construction

WB8 HD WILDBOAR DRIVESHAFTS

WB8 HD Wildboar front and rear driveshafts feature a larger diameter cross pin (2x11mm) along with an M4 Screw Shaft (2mm hex drive) for greater strength. A center splined slider floats between each end and has added material to reduce flex and fatigue.

6MM STAINLESS STEEL LINKS

Strong 6mm stainless steel links with high grade plastic rod ends for durability. All links are metal including the steering.

STAINLESS STEEL PIVOT BALLS

All pivot points are on stainless steel balls that provide a durable, long-lasting suspension point.

LARGE BORE ALUMINUM SHOCKS

The oil-filled shocks are an all-new design with hard anodized, threaded shock bodies and a single coilover spring. Their increased bore size creates more fluid volume for better performance. A bleed screw helps to bleed air from the shock during assembly for greater consistency. The shocks are also tunable so you can achieve the best dampening rate.

STAINLESS STEEL STEERING LINKS

The steering links are also made from 6mm stainless steel, offering precise steering and durability.

HOOD RELEASE

Remove the clips hidden on the underside of the tube frame to raise the hood up and gain access to the battery tray.

4-LINK SUSPENSION

We've fine-tuned the suspension geometry with multiple mounting locations for the upper link mounts to provide the best crawling capabilities.

GRILLE AND HEADLIGHT BUCKETS

The molded plastic front grille features two clear plastic headlight lenses with light buckets (optional LED lights not included). Behind the grille, under the hood, are two hood mounts with clips. Remove the clips to raise the hood up and gain access to the battery tray.

BATTERY TRAY

The battery tray is forward mounted, and located under the hood. The tray size is built for shorty packs, at a maximum size of 26mm x 98mm x 47mm.

Product description

Assemble Video: bit.ly/3ckuQQI. Product Parameters

Model: T101

Size: 19*16.5*5.7cm

Weight: 0.53kg

Track: plastic

Motor: 6-12V

Wheel: metal

Frame Material: 2mm aluminum

Surface treatment: sandblasting oxidation

Wheel Paramters

Driving Wheel Size: 48.03*31.85mm

Bearing Wheel Size: 48*37mm

Track: 52 joints

Motor Paramters

Voltage Range: 6v-12v

No-Load Speed: 170-350rpm

Rated Voltage: DC 12v

No-Load Current: 100mA

Motor Weight: 100g

Shipping List

Panel: 1pcs

Motor: 2pcs

Track: 2pcs

Bearing wheel: 2pcs

Driving wheel: 2pcs

Screw: 1set

Free

Acrylic plate: 1pcs

couplings: 2pcs

Hexagon wrench: 3 different types

Reminder

Please be careful to your hand and body when installing the car chassis.



FAQ:

Q: Where can I find the documents?

A: The document can be find at OUR BLOG gitnova dot com, and there we have the refered source code for Arduino.

Q: If the track is too long for the car, how to solve it?

A: The track is connected one joint by one joint. So, the track can be adjusted any length by using some tools similar to the Tweezers.

Q: What is the working voltage for the motor?

A: The working voltage can be 6-12V.

Q: How about the bearing load?

A: The car is mainly used to the scientific study research. So the bearing load is not big, about 1-3kg. If need much big load, please contact us.

Q: Which controllers are suitable for this car?

A: Many controllers can be used to control this car, e.g., Arduino, Raspberry pi, STM32, Micro Bit, and so on.

• Solid but Cheap: Assemble Video: bit.ly/3ckuQQI. The car panel is metal, which is different from the plastic/acrylic, but the price is almost the same.
• Convenient Use: The tank car chassis can be controlled by any other controllers, e.g., Arduino, Raspberry, STM32.
• Good Help for Your Project: When you want to do some robot model function realization. This smart car chassis is very suitable for you.
• Updating Richful Documents: Visit our blog gitnova.com, you can find many installation document or referred source code.
• Provide the Referred Controlling Example: We provide the illustrative controlling example with differe wireless controll mode: bluetooth, wifi, and ps2.

Product description

The Gecko X10 is a high quality, performance 1/10 scale 4WD Off-Road Chassis designed forTrails, Rock Crawling, and Scale Off Road Driving. It features full Aluminum and Alloy Steel Construction, for bomb-proof durability - In the Box! Rock Lizard Crawlers has provided every popular upgrade as equipped - with no additional upgrades needed. This provides immense value over the competition, while maintaining compatibility with other popular platforms on the market.

• performance 1/10 scale 4WD Off-Road Chassis
• full Aluminum and Alloy Steel Construction, for bomb-proof durability
• Rock Lizard Crawlers has provided every popular upgrade as equipped

User questions & answers

Question:	Is this a rtr rig? Is there no electronic
Answer:	It doesn't come with any of the electronics
Question:	Is the servo chassis mounted
Answer:	No. It is axle mounted
Question:	what does this weigh as it sits in the picture? is it axial compatible for upgrades? Thank you
Answer:	I am not sure of the weight. This is my first crawler and I didn't put any thought into that. So far I have put an RZXYL servo relocator in and that fit as it should and accepted the bumper in the picture just fine. I also put in an RCLions Carbon Fiber Battery Holder/ESC Relocation Mount for scx10 ii and that was no problem as well and lowered the center of gravity a bit. Its pretty high up in its stock location on this chassis and that kit also keeps the weight up front. The only thing I have modified are the body mounts. Everything else has fit without modification. Hope this helps and happy crawling.
Question:	Does it come with a Pinion gear? If so what is the shaft hole diameter for it
Answer:	I honestly can't remember if it came with my chassis or my axial 27t motor and I believe it should be 3mm

Product description

Note: The color of the item may vary slightly due to photography and your own computer /Phone

There's some little error from human measuring.

Customer Satisfaction Guarantee

If you are not 100% completely satisfied with our products, please do not hesitate to contact us to request a refund or exchange!



Note:Check your specific model's manual for compatibility,or Contact us.

• ✔500pcs in total,Various Size,A must have for your RC Vehicles Trucks Buggy, Short Course,Crawlers, On-Road,Off Road,etc.
• ✔Packed in Transparent Box(Approx 175x100x21mm) ,Keep your screws organised Easy to take and use
• ✔Compatible with:Spare Parts for Mostly Brands 1:8 1/10 1/12 1/16 Scale Models,Such as TRAXXAS / HPI / Team Associated / Redcat Racing / Axial / Exceed RC / Losi / RC4WD / HSP / Himoto / Tamiya,HobbyPark ,etc
• ✔Package include: 500pcs in total,M3 & M4 Screws (Flat head & Round head, Hex Drive),M3 Flat washers, 3mm & 4mm Lock Nuts Body Clips, E-clips,Pins, O-circle
• ✔100% New,Genuine HobbyPark RC Products,Exquisite workmanship & Durable

User questions & answers

Question:

can you list out the types of screws in the pack

Answer:

Total rough estimate in both unit count and unit sizes, but it should give a good idea of what's included and how many of each: 25-Body Clips 22-4x.7 Nylon Lock Nuts 21-2x.5 Nylon Lock Nuts 23-Rubber o-ring (~6mm) 26-8mm Metal Washer 38-6mm Metal Washer 37-Metal Posts (~9mm) 23-C-Clips 22-Set screws  (small) 22-Set screws (large) 20-4x13mm Buttonhead 21-4x10mm Buttonhead 30-3x15mm Buttonhead 33-3x13mm Buttonhead 27-3x10mm Buttonhead 31-3x8mm Buttonhead 21-4x13mm Countersink 20-4x8mm Countersink 34-3x8mm Countersink 29-3x10mm Countersink 33-3x13mm Countersink 32-3x15mm Countersink

Product description

Features

• Behind-the-axle (BTA) steering
• Aluminum steering plates
• Integrated servo winch mount
• Threaded aluminum shock bodies
• CMS (Chassis Mounted Servo)
• Adjustable front track bar
• Universal front drive axles
• Stamped steel frame rails
• Enclosed water-resistant receiver box
• 12mm wheel hexes
• Adjustable front and rear bumper mounts
• Adjustable width rock sliders
• Two battery boxes: one standard and one shorty

• Aluminum motor plate
• Adjustable body posts
• Optimized ball cups for more fluid axle articulation
• Adjustable rear shock mount positions
• Telescopic driveshafts front and rear
• Extruded aluminum driveshaft splines
• One-piece rear axle design
• Splined front axle with adjustable caster
• Machined input pinion gear
• Metal ring gear
• Machined steel top shaft
• Heavy duty 5mm diameter steel links
• Metal ball bearings included

A Performance Rig Built To Endure

When hitting the trail, you want to do it with confidence and the answer is the all-new Enduro Builder's Kit!

At the heart of the Enduro is our revolutionary Stealth X gearbox. Although the exterior appears to have a conventional 3-gear transmission look, the inside is far from conventional. The Stealth X features the ability to adjust the rear drive ratio independently from the front drive in 3 levels:

• Stock (with 27T and 53T gears, above) overdrives the front end 5.7%.
• Option 1 (with 28T and 52T gears, below left) provides a one-to-one drive ratio front to rear.
• Option 2 (with 26T and 54T gears, below right) overdrives the front end 11.83%

User questions & answers

Question:	Does it come with Electronics
Answer:	Hey watts up ? Unfortunately it doesn’t come with anything just frame, shocks, transmission, axles .
Question:	Does this not support a brushless motor and esc
Answer:	Yes it does, it’s up to you to choose what motor you want to put in the kit.
Question:	Will a 550 brushed motor fit in this chassis
Answer:	Yes it will.
Question:	Can you change the overdrive options? with the controller or is that something i have to choose as i am putting it together
Answer:	Must change the gearing in the transmission as you are building the kit.

Product description

The headlight is for 1/10 RC Rock Crawler Axial SCX10 RC4WD Traxxas TRX-4 Cars.

With 12 kinds of light modes, meet your needs for a wide range of light colors.

Features:

Direct remote control three-channel control.

The outer diameter of the headlight is 19 mm, and the outer ring is protected by super thick silicone sleeve ring.

Cold white light source in inner ring and color light in outer ring, highly simulated.

Adopt RGB colored lamp bead, the program sets a variety of luminous colors, and the luminous is uniform, soft and not dazzling.

This headlight has 12 modes, various colors, gradients, flash, scroll and more.

Designed perfectly for 1/10 RC Rock Crawler Axial SCX10 RC4WD Traxxas TRX-4 Cars.

Specifications:

Product Name: Headlight

Voltage: 5-8V

Power: 2W

Waterproof rating: IP6

Access mode: Remote control receiver

Diameter: 19mm

Product weight: 26g

Wire length: 58cm

Package information:

Package size: 8*8*2cm

Package weight: 28g

Package List: 1*Headlight set

• Direct remote control three-channel control.Designed perfectly for 1/10 RC Rock Crawler Axial SCX10 RC4WD Traxxas TRX-4 Car
• The outer diameter of the headlight is 19 mm, and the outer ring is protected by super thick silicone sleeve ring.
• Cold white light source in inner ring and color light in outer ring, highly simulated.
• Adopt RGB colored lamp bead, the program sets a variety of luminous colors, and the luminous is uniform, soft and not dazzling.
• This headlight has 12 modes, various colors, gradients, flash, scroll and more

User questions & answers

Question:	How do they mount
Answer:	Dear customer The lights are connected to the 3&4 channels of the receiver, and then the 3&4 channels of the remote control are used to control the lights
Question:	do i understand this correctly? the bright white center lite(like a typical headlte) can not come on except in the flashing mode
Answer:	The lights cycle through several different settings. The main lights can be off, flashing, or steady on. It will go through all the ring colors in order, then do the rainbow ring, then a slow fade through all the colors. It will do ONLY one function at a time though. If the outer rings are on, the main lights do not come on. It is bright enough that you would not see the outer rings anyway.
Question:	Will these lights work with rc4wd light controller... i can get white lights to come on and off but halos wont work
Answer:	Dear customer Compatible with rc4wd, the LED light cable is plugged into the receiver's 3 channel, and it is controlled by the remote control's 3 channel switch. Each time you press the 3 channel switch, the light will change a mode
Question:	Do you make light strips that change colors. Would be perfect compliment to halos
Answer:	/Duration 0:15Loaded: 0.00%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:15 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } The middle light will be on in the burst flash mode, but not in the colorful light mode

Product description

Features: The kit version is an empty version. The car is all parts and needs to be assembled by diy. The frame is equipped with a plastic steering gear, standard with soft tires.The frame has improved the steering gear seat, which is perfectly compatible with the 17g steering gear.No other electronic equipment is included in the package except steering gear and power motor.No remote control, no receiver, no batteries, no switches The frame is equipped with a plastic steering gear, standard with soft tires The frame has improved the steering gear seat, which is perfectly compatible with the 17g steering gear Made of plastic, it is durable and practical Specification Types: C24-1, C24-1 kit(need self assembly), C24 1 Kit Metal(need self assembly) Model: WPL C24-1 Material: Plastic Color: White Size(L x W x H): About 31 x 14.1 x 14cm/12.2 x 5.55 x 5.5inch Car battery: 7.4V 500mAh rechargeable battery (included) Charging mode: USB charging, charging light red Charging time: 2 hours Battery of remote control: 2pcs 1.5V AA battery (not included) Play time: 20-30 minutes Remote control distance: Over 35 meters Package included: Choice A: 1pc x RC car 1pc x Built in battery 1pc x Remote controller 1pc x Charger 1pc x English user manual Choice B: 1 set of RC car parts and accessories (C24 1 Kit, C24 1 Kit Metal type) Notice: Due to the light and screen difference, the item's color may be slightly different from the pictures. Please allow 0.5-2cm differences due to manual measurement.

• Made of plastic, it can hold up well through lots of crashes. Smooth flexible wheels can reduce the friction between the tyre and floor.
• The frame is equipped with a plastics steering gear, standard with soft tires
• The frame has improved the steering gear seat, which is perfectly compatible with the 17g steering gear
• Package included: Choice A (C24-1) : 1pc x RC car, 1pc x Built in battery, 1pc x Remote controller, 1pc x Charger, 1pc x English user manual. Choice B: 1 set of RC car parts and accessories (C24 1 Kit) The kit version is an empty version. The car is all parts and needs to be assembled by diy.
• It's not like the other ordinary and small RC car. The body design is manificent and beautiful, which is very popular with children. Simple operation, it is the first choice for off-road remote control car enthusiasts. Also it's a perfect birthday or festive gift for children.

User questions & answers

Question:	Does the kit version include a controller
Answer:	Yes
Question:	Is it prebuilt
Answer:	Yes

Product description

Product description

M3 and M4 Hex Flat And Button Head Screws Kit Tool Set with M3 Bolt Washer, Lock Nut, Shell Clip, E-Clip, Pins and O-Circle

Hardware Fastener For 1/8 1/10 RC Cars.

Material: High Quality Metal, High Hardness and Durable..

Store in different grids in a plastic case for easy Organization and usage.

Package List:

Flat Head M3 Screw:



8mm X30

10mm x30

12mm x30

16mm x30

Flat Head M4 Screw:



8mm x20

12mm x20

Round Head M3 Screw:



8mm X30

10mm x30

12mm x30

16mm x30

Round Head M4 Screw:



10mm x20

12mm x20

Jackscrew

M3 3mm x20

M4 4mm x20

M3 Bolt Washer x20

E buckle x 20

Shell buckle x20

M4 screw nuts x20

M3 screw nuts x20

Anti-shedding ring x20

Pin X20

Note: Please check the manual of your model for compatibility before placing an order.

• 1. Material: High Quality Metal. Various Size Screws idea for RC Models.
• 2. Compatibility: Fit for 1/8 1/10 RC Model Cars.
• 3. Easy Organization and Portable: Classify and Store in different grids in a plastic case for easy usage.
• 4. A must have for RC Model Cars Vehicles Trucks Buggy, On-Road Off Road, Short Course and Crawlers.
• 5. Package List: M3 and M4 Screws (Flat and Round Head), M3 Bolt Washers, Lock Nut, Shell Clip, E-Clip, Pins and O-Circle. 500Pcs totally.

Product description

Description:

100% brand new and high quality

Features

1. The kit empty version needs to be assembled by yourself for it is composed of components and parts. A plastic steering gear and standard soft tire are included.

2. The product contains metal frame, steering gear and 17 g server 180 metal power motor + copper gear. Other electronic devices are not included.

3. The remote control, receiver, battery, recharger and ESC are not included. You can buy a better configuration as you like for more fun.



Specifications:

Material: Plastic + Metal

Color: Red, Blue

Proportion: 1:16

Drive Type: 4 WD

Functions: Climb

Size: app.31x14.1x14cm/12.2x5.55x5.51''

Quantity: 1set

Note:

Transition: 1cm=10mm=0.39inch

No retail package.

Please allow 1-2cm error due to manual measurement. pls make sure you do not mind before you bid.

Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!



Package includes:

1 x Car toy kit set(other accessories demo in the picture is not included.)

• Material: Plastic + Metal
• Drive Type: 4 WD
• Functions: Climb
• Size: app.31x14.1x14cm/12.2x5.55x5.51''
• 100% brand new and high quality

Product description

Aluminum Alloy Rod Link Linkage Kit for 1/24 RC Crawler Car Axial SCX24 Upgrade Parts