13 best everlast e bikes

Product description

Type Heavy Bags Condition New Color Brown Model 19100800 Brand Everlast Assembled Product Dimensions (L x W x H) 13.50 x 13.50 x 53.50 Inches

• Type Heavy Bags Condition New Color Brown Model 19100800 Brand Everlast Assembled Product Dimensions (L x W x H) 13.50 x 13.50 x 53.50 Inches

User questions & answers

Question:	Can this be used outdoors
Answer:	More for ages 7-10. May be to small for 12-14.
Question:	Does it come with a Stand Post
Answer:	Not really, it’s just what ever purpose you want to use them for. 8oz is more of speed work and 16oz is more of strength. More padding on a 16oz too. And harder to keep throwing 16oz out there then 8oz. Depends on your knowledge of boxing and techniques you want to work on.
Question:	Is this bag made of real or synthetic leather
Answer:	Of course you can! These gloves are great for training all fight sports at any level. These gloves hold up to anything from your cardio based boxing class to intense heavy bag workouts.
Question:	After waiting two weeks why did you guys cancel the order
Answer:	Yes they are attached

Product description

Easy to use, boil and bite design. Lightweight for comfort. Easy to form for secure fit.Protects upper and lower teeth.

Warranty:

Everlast warrants its products to be free from defects in materials and workmanship for a period of 120 days from date of purchase, provided they have not been subjected to obvious abuse, neglect or misuse. Everlast's sole liability is limited to repairing or replacing products that are returned within this 120-day period, unless specific product literature specifies otherwise.

Please contact customer service for full details, and for replacement assistance at 1-800-821-7930.

• Center breath channel allows for unobstructed air flow.
• Used for training protection.
• BPA & Phthalate free.

User questions & answers

Question:	Does this mouthguard work with braces
Answer:	They have no leather at all. The main "leather"-like material is an fact vinyl.
Question:	How do you boil it
Answer:	They weigh in at 8oz
Question:	Does it come with a case
Answer:	Yes it would fit an average 5 to 8 year old hands
Question:	The sizes listed are "one size" and "each" what does that mean
Answer:	De 10 a 12 estas a limite. Mas pa 7 a 10

Product description

Features & Benefits Stable, smooth DC arc Low Power Consumption Professional capability with 35% duty cycle Portable with over the shoulder carrying strap Easy Hot Start for reduced electrode sticking Auto-Regulated Arc force control Standard HF and Lift Start TIG feature Digital Display for precise current setting DINSE style connectors for easy connection Impact resistant Carry case with TIG kit included as part of the standard package Foot pedal capability offers simple control over the full amp range, from 10-160 Dual Voltage 120/240 Adjustable Post Flow control for TIG .this model will not do 6010 rods

• Lightweight and portable - 35% at 160amp -- With HOT START
• IGBT Infineon Modules , inverter technology
• 160a HF TIG DC and STICK with build in valve
• 5 Year (Parts and Labor) and 30 days money back
• DUAL VOLTAGE 110v/220v

User questions & answers

Question:	Is the foot pedal provided capable of variable amperage
Answer:	I have the 160 STH not the 160i STH BY THE US MADE FOOT CONTROL TO FIT THIS MACHINE I IT WORKS AWESOME !!!
Question:	Can I Tig weld using the 110 volt option
Answer:	Yes, you can do low amp stuff on 110. Mine maxes out at 90 amp on 110 but you won't be able to weld but a couple minutes at a time at 90 amps on 110.
Question:	Can i weld aluminum
Answer:	No, this machine is DC only, AC voltage is usually required to tig weld aluminum. Technically you can possibly stick weld aluminum, but this machine will not Tig weld aluminum.
Question:	Description says "2016 everlast..." and in details section says "date first available: december 3, 2013". so is it 2013 or 2016 model
Answer:	It's a 2016 that was first introduced in 2013.

Product features

EVERLAST PowerARC 160STH 160amp HF TIG Stick IGBT Welder 110/220 Dual Voltage

Features & Benefits Stable, smooth DC arc Low Power Consumption Professional capability with 35% duty cycle Portable with over the shoulder carrying strap Easy Hot Start for reduced electrode sticking Auto-Regulated Arc force control Standard HF and Lift Start TIG feature Digital Display for precise current setting DINSE style connectors for easy connection Impact resistant Carry case with TIG kit included as part of the standard package Foot pedal capability offers simple control over the full amp range, from 10-160 Dual Voltage 120/240 Adjustable Post Flow control for TIG .this model will not do 6010 rods.

Product description

Mouth guards are needed to protect you from damaging your teeth

Warranty:

Everlast warrants its products to be free from defects in materials and workmanship for a period of 120 days from date of purchase, provided they have not been subjected to obvious abuse, neglect or misuse. Everlast's sole liability is limited to repairing or replacing products that are returned within this 120-day period, unless specific product literature specifies otherwise.

Please contact customer service for full details, and for replacement assistance at 1-800-821-7930.

• Boil & bite down design allows for custom molding of mouth guard to maximize protection and comfort
• Designed to provide unobstructed air flow

User questions & answers

Question:	what is it made out of? and is this size appropriate for ages 7 to
Answer:	I would not expose it to rain [mildew] or high direct sun [UV damage can weaken straps and discolor]
Question:	Is this mouth guard latex free
Answer:	No. It comes with gloves, bag, wraps, and chains for hook up
Question:	is this bpa free
Answer:	Synthetic
Question:	do you need to put on boiling water everytime you use it
Answer:	Mine was canceled too after nearly three weeks. They said it was damaged, and to cancel the order and reorder. When I purchased the first time it was $105. When they canceled my order, I noticed the price went up to $155. So obviously they just decided they wanted to sell for a higher price. VERY UNPROFESSIONAL.

Product description

Power and versatility top the list of features of the Power i-MIG 200. The new digital IGBT inverter design of the i-MIG welder reduces the weight and footprint of the unit making it truly portable. The dual voltage design allows the unit to be used about anywhere a receptacle is present. This unit packs more features than any MIG welder in its class. Dual digital displays feature both volt and amp readouts allowing the operator to make precise and repeatable adjustments to the parameters. The stick function adds an extra dimension of versatility and performance when a MIG welder isn't needed or practical. The Arc force control controls manages the arc characteristics in both MIG and Stick modes. In MIG mode, it controls current rise time, affecting puddle fluidity, bead contour, and penetration. In stick mode the arc force control behaves as a DIG control function and improves arc performance in short arc situations. Automatic Preflow and Postflow control improves weld quality during stops and starts helping to reduce porosity for high quality results. The new adjustable burn back control reduces trimming required so the wire is at the perfect length for each restart. When you consider all these features and performance, the all new Power i-MIG 200 is among the best you'll find in its class yielding professional level results. MIG: Weld up to a maximum of 7/16" in a single pass weld* 240V Weld up to 3/4" in multiple pass weld 240V Weld a minimum of 24 gauge 120/240V Weld a maximum of 1/8" single pass on 120V Weld a maximum of 1/4" multi-pass on 120V *Single pass welds greater than 1/4" are not generally recommended as a sound welding technique. Weld with an electrode with a minimum diameter of 1/16" 120/240V Weld with an electrode with a maximum diameter of 5/32" 240V Weld with an electrode with a maximum diameter of 3/32" 120V

• Digital IGBT Inverter design offers stable, low spatter arc performance
• Arc force control (Inductance) adjusts arc characteristics in both MIG and Stick modes
• Capable of SMAW (Stick) welding when MIG conditions aren't ideal / Flux core capable
• Eurostyle quick coupler allows easy aftermarket changeover to other MIG guns
• Weld aluminum with optional MIG gun / Automatic Preflow and Postflow / Adjustable Burn back control

User questions & answers

Question:	Why did the price jump from $650 to
Answer:	Harbor freight Carrie's them
Question:	where can you find the correct spool gun for the 200 i-mig unit
Answer:	Yes
Question:	How thick material can it weld up to
Answer:	No you wont get all the power probably around 140 amps max @120. There is no way around using the full 200 amps without using 240. Buythe smaller version if you dont want to install a 240 outlet at your house. A 140 amp mig welder will do most jobs around house....i usually go up to 1/4" with my 140mig anything bigger i use my 250 amp mig welder. Dont try to convert a 240 volt welder to 120 like suggested below. This will just void any warranty lol. If you asking theses type of questions just buy a 140amp mig ....there cheaper
Question:	What is the thickest metal that should be welded when using this welder
Answer:	No .035 is max
Question:	What contact tips are compatible
Answer:	Gracias por su interes. Esto no es un láser, es solo un enrutador.
Question:	does it hold 10 pound spools
Answer:	The E3 has a 17.7" x 15.3" cutting area and a 1/4" insets on the spoilboard. The E4 has a 24" x 24" cutting area and a t-slotted spoilboard. Both assembly manuals can be downloaded and reviewed on the BobsCNC webpage.
Question:	If you have it plugged into a regular 120 outlet instead of a 240 you don’t get the full 200 amps? Is this correct
Answer:	I suppose it could be done, but it is not needed. The Nema17 stepper motors have more than enough torque. The CNC can jog at over 200 inches per minute. and has plenty of torque for cutting at cutting feed rates.
Question:	Will it take .045 wire? If no, what is the maximum wire thickness it does
Answer:	The cutting area is of the E4 is 24" x 24" so you would need to tile the work by cutting the first 24", them moving the workpiece and cutting the next 24". Also, we have a customer that modified his E4 so that it has a 24" x 48" cutting area. Please contact us thru our webpage and I will email you the pdf plans if you are interested.

Product features

Everlast PowerMIG 200 200amp MIG stick welder dual voltage 110v/220v spool gun

Includes:

Euro style quick connector.

10 ft. Series 15 MIG gun (Binzel/Trafimet compatable).

Ar/CO2 Regulator.

Work clamp with cable.

Spare consumable starter kit.

Product description

The all new PowerARC 200ST is built with the true professional in mind. With 200 amps of DC Stick/Lift TIG welding power, the compact IGBT inverter welder cuts no corners on performance or design. The unit features E6010 welding capability via a dedicated connection port on the front panel of the welder for use on pipelines, shipyards, construction sites, portable repair jobs and pressure and container vessels, and any place requiring the use of E6010 and related cellulose-based welding rods. For excellent low spatter arc performance on E7018, E7024, E7014 and even stainless class electrodes the unit features another connector port for all other welding rods. In both the 6010 and standard operating modes, the unit feature auto adaptive Hot Start, and auto regulated arc force control, which gives you the a. Although this unit is built for pros who demand the most from their welder, the PowerARC 200ST feels at home, on the farm, or in the hobbiest's garage and features 120V/240V dual voltage operation. Be sure to pick up a gas valve TIG torch and gas regulator if you want to TIG weld with this unit. Check out our 17V series TIG torch and gas regulator located in our accessories section which are ideal for this unit if you need to use the TIG function. Minimum/Maximum: Stick: Minimum 1/16" electrode (120/240V) Maximum 5/32" -3/16" electrode (240V) Maximum 1/8" electrode (120V) (Max electrode size will depend upon type and brand) TIG: Minimum .025" Steel/Stainless (No aluminum)[120/240V] Maximum Single Pass: 1/4" Steel/Stainless (No aluminum) [240V] Maximum Multi-Pass: 3/8" Steel/Stainless (No aluminum) INCLUDES Stick electrode holder with 10 ft cable and 35 series DINSE- style connector Work Clamp with cable Consumable Starter Kit (Tungsten not included) 35 Series Female DINSE Connector

• Stable, Smooth DC ARC for best Stick/TIG welds. No AC output.
• Dedicated E6010 connection port for best E6010 and cellulose rod performance
• Auto regulated Arc force control for better arc performance in short arc situations
• Digital display for precise current setting
• Auto Adaptive Hot Start for reduced rod sticking during starting

User questions & answers

Question:	can you reverse the positive and negative leads without doing damage
Answer:	Yes it covers it and makes sure it doesn't get damaged
Question:	how many amps can it output on 120v? cheers, stephen
Answer:	Fill a 2qt. Sauce pan half way with water. Bring it to a boil. Get a 1.5 or 2 qt bowl and fill it with tap cold water. You need enough to fully submerge the mouthpiece. Lay out a towel on the counter so you can set it down and let it dry after the cold rinse. Follow the instructions. They give the boil time. When you put it in your mouth, it won't burn you. Bite, push with your tongue, and tighten your lips. A little suction might also help. Use metal tongs to get the mouthpiece out of the saucepan.Best advise, watch at least 3 different YouTube videos that shows a guy (or girl) doing it. You might get other good tips there.
Question:	What is included with the welder
Answer:	Nop
Question:	What is the duty cycle
Answer:	Not sure! But from all the ones I've bout even though it's one size they have fit me comfortably even tho after get a new I mild them even more

Product description

Hand wraps protects your muscles, joints and tendons from punishing use while hitting a heavy bag or your opponent

User questions & answers

Question:	Does this come in a pair, for both hands? Or just one hand
Answer:	The mouth guard is made of a transparent thermoplastic material that becomes totally malleable when put in boiling water for 30 seconds and then dropped cold water for a few seconds. It is designed for a teenaged/adult mouth and I don't know if you can purchase child sized ones however you can use household scissors to cut the excess length and/or height from this as you go through the molding process. (I use these guards to make small "jigs" that align and separate my teeth when my TMJ acts up and so am used to cutting off both length and extra height.) The most important thing is o get a good, tight mold that covers and protects the upper teeth all the way back to the molars. It my take more than one pass through the molding process and you might want o purchase two jut in case you mess up the first one. (The material gets very floppy when heated.)
Question:	Is this for one hand or both hands
Answer:	I'm not 100% sure, but I believe it is latex free.
Question:	Does the wraps have a valcro to strap it at the end
Answer:	Yes, here is the info from the Mfg: Boil and bite design allows for custom molding of mouthguard to maximize protection and comfort. Used primarily for training protection. 100% EVA. BPA & Phthalate free.
Question:	Is this a pair (2) of wraps or a single (1) wrap
Answer:	No follow the direction to boil it and drop it in cool water for a second then do your best to fit it to your mouth. You may have to boil it more than once to get a good fit but once it's done it's done. You shouldn't have to boil it again.

Product description

You don’t have to pick one over the other. There are times where one welding process is simply a better choice than another. With the PowerARC 210STL, you won’t have to worry about that issue with both Stick and TIG capability. The PowerARC 210STL is a perfect choice for the fab shop, pipeline or even farm. It has more than enough power to handle 5/32” welding rods. Super smooth E7018 stick welds can be obtained with the use of the adjustable arc force control and hot start controls. If an E6010 electrode is required, the welder is a good performer and can be adjusted to improve the aggressiveness of the arc. But we know stick isn’t the answer for everything. So, we’ve really polished the unit’s capability as a TIG welder. The Lift Start capability of the machine is one example. Lift starting the TIG arc is a good choice in sensitive electronic environments, where a high frequency start may interfere with operation of vital equipment. The unit also features DC TIG, which essentially allows you to TIG weld almost every weldable metal except Aluminum and Magnesium. To further bolster TIG capability, the optional foot pedal allows you initiate the lift start and then to modulate amperage remotely. Or if preferred, you can use the torch switch to control arc initiation to initiate the arc and control amperage on the panel. However, if you are on a ladder, the live lift function operates without a torch switch or a foot pedal.

User questions & answers

Question:	If I were to wire a 220v outlet what size breaker would I use and gauge of wire for this machine to run properly
Answer:	Yes. The leads are inter changeable and you can weld reverse polarity.
Question:	What is the duty cycle of this machine
Answer:	120 AMPS but to run at that output you will need a 20 amp circuit with nothing else on it. Hope that helps.
Question:	Is a 10k watt generator enough power to run this machine
Answer:	1 Power unit. 1 Electrode holder. 1 Ground clamp. 1 240 to 120 volt cord adapter. Owners manual.
Question:	what is the total shipping weight of this machine
Answer:	Great machine! I'm a pro welder and it performs as well as any machine I have used over the last 40 years. The performance exceeds the needs of most hobbyist and general repairmen.

Product description

Warranty:

Everlast warrants its products to be free from defects in materials and workmanship for a period of 120 days from date of purchase, provided they have not been subjected to obvious abuse, neglect or misuse. Everlast's sole liability is limited to repairing or replacing products that are returned within this 120-day period, unless specific product literature specifies otherwise.

Please contact customer service for full details, and for replacement assistance at 1-800-821-7930.

Quality hand wraps are an essential piece of equipment for boxing workouts, helping to protect the bones and tendons of the hands while providing support to the knuckles and wrist. Made of a heavy 100% cotton weave, Everlast Hand Wraps feature built-in thumb loops that make self-wrapping easy and a Velcro closure for a secure, comfortable custom fit. The hand wraps are designed to meet professional and amateur requirements.

About Everlast

The name Everlast is synonymous with boxing. Renown internationally as a manufacturer of boxing equipment, Everlast started out as a swimwear manufacturer in 1910. Headquartered in the Bronx, NY, the company was founded by 17-year-old Jacob Golomb. The son of a tailor and an avid swimmer, Jacob Golomb was dissatisfied with the durability of swimsuits because they barely lasted a season, so he began making suits that he guaranteed would last for a full year. He proudly gave them the name, Everlast. Although the swimsuits did not last through the years, the name did.

Over the next years, Golomb expanded his company into a small retail store that carried a full line of sports equipment. In 1917, a young fighter named Jack Dempsey introduced boxing to Golomb and Everlast. Dempsey asked Golomb to construct protective headgear that would last more than 15 rounds of intensive boxing training. Golomb specially designed the training gear for Dempsey. In 1919, Dempsey won the worlds heavyweight championship wearing boxing gloves made for him by Golomb. Everlast became the headquarters for boxing equipment throughout the world. In 1925, Golomb designed elastic-waist trunks to replace the leather-belted trunks then worn by boxers. These trunks, now known as boxer trunks, immediately became famous. Jacob Golomb ran the business until he passed away in the early 1950s and his son, Dan, took over. In 1958, Ben Nadorf joined Everlast and purchased 50% of the company from the Golomb family. When Dan Golomb passed away in 1995, Nadorf purchased the familys remaining 50% interest. Nadorf remained the President and Principle Share Holder of Everlast until October 24, 2000.

Everlast mens and womens apparel and accessories continue today to be tremendously successful both inside and outside the ring. In addition, Everlast boxing trunks and equipment remain the proud and undefeated champion of the boxing industry for more than 90 years. The history continues, as the name states. Everlast has a traditional past and a knockout future.

Whats in the Box?

Three pairs of hand wraps

Manufacturer Warranty

1 year

• Made of machine-washable 100% durable cotton-weave
• Convenient thumb loop with Velcro closure for easy and secure wrapping
• Meet professional and amateur requirements

User questions & answers

Question:	Are these washable
Answer:	Yes. I wash mine all of the time by placing in a garment bag and throwing in the washing machine. Hand washing is another option that may extend the life of the wraps.
Question:	whats the length of each individual wrap that come in the pack of
Answer:	They are 2" x 108" so 9 feet in length.
Question:	How many wraps total
Answer:	This kit provides 3 pairs, so a total of 6 wraps. They are 108" and are shorter than others, but I find they work great for under MMA gloves.
Question:	fingers
Answer:	hi, this is too short for me. I have a relatively small hand but all three packs are still too short. I would suggest you to buy the longer one which was what happened to me. Therefore, I basically got three packs of those wraps in my home useless.

Product description

Input Voltage/Hz/Phase 220/240V 50/60 Hz 1Ph -- TIG Output Amps 5 to 210A DC; 10 to 210A AC --Stick Output Amps 10 to160A--Duty Cycle @ Rated Amps 40% @ 210A -- Wave Form Control Sine Advanced ,Square and Soft Square --AC Frequency 15 to 200 Hz-- AC Balance -30 to +30% (20-80% of EP) --Tig Start Type Lift and HF start --Pulse Type Standard (for AC and DC use) Advanced (for AC use only)--Pulse Frequency DC .5 to 500 Hz AC .5 to 10 Hz --Pulse Time On % ( Pulse Width/Balance) 20 to 80% --Pulse Amp (base) Adjustment 1 to 99% of Welding Amps--Pre-Flow Time .1 to 9.9 Seconds--Post-Flow Time 0 to 25 Seconds -- Start Amps 1 to 100% of Welding Amps--End Amps 1 to 100% of Welding Amps--Up Slope 0 to 10 Seconds--Down Slope 0 to 25 Seconds--Adjustable Hot Start Time (Stick) .5 to 5 Seconds--Adjustable Arc Force Control (Stick) 0 to 100%--Adjustable HF Start Time Yes .5 to 5 Seconds--2T/4T Torch Control Yes --Adjustable Lift Start Amps Yes

• Microprocessor control offers precise management of welding parameters and functions
• 3 types of wave form for AC welding: Sine Wave, Advanced Square Wave, and Soft Square Wave
• programmable Stick functions which include hot start time, hot start intensity and arc force control
• IGBT TECHNOLOGY - standard type pulse feature for AC and DC, and a special Advanced Pulse for AC
• Ideal for generator use with a Power Factor Correction (PFC) of greater than 99-Percent

User questions & answers

Question:	Is the torch that comes with this set air cooled or water cooled
Answer:	Both torches are air cooled.
Question:	Can this be ordered with a torch cooler as a combo
Answer:	You can get it separately plus a water cooled torch
Question:	Does it come with the crappy steel ground as pictured or a tweeco style ground
Answer:	It comes with a tweco style
Question:	what style torches are included
Answer:	I just confirmed with an Everlast sales rep that the Amazon 210 EXT is a repackaged assemblage DIFFERENT than that sold on the Everlast site...which is similar in practice that you may find at Costco. So caveat emptor and be aware that Everlast confirmed that the Amazon buy only has a single torch. 12/26/19

Product features

2017 Everlast PowerTIG 210EXT Inverter-based IGBT Technology Welder

If you are wondering what having digital microprocessor control can mean, just ask anyone who has used it. The benefits are numerous, whether its increased productivity, or increased weld quality, or the ability to make precise settings, and fine tune them to the exact standards required. This is all part of the benefit of owning a PowerTIG 210 EXT. This TIG/Stick welder from Everlast also features IGBT inverter technology which offers the best in arc stablity and performance while reducing size and weight.

IGBT Technology - standard type pulse feature for AC and DC, and a special Adva

The unit features wave form control with three distinct wave forms: Advanced Square wave, Soft Square wave, and Triangular. These help to offer flexibility while welding Aluminum. But that's just part of the story. This TIG/Stick welder also features programmable memory, adjustable AC Frequency, and adjustable AC balance control. It also works quite well as a stick welder featuring items like adjustable hot start and arc force control for maximum welding flexibility. The heavy duty HF arc start design reduces traditional HF component maintenance issues. The unit also features two pulse modes, standard and advanced pulse. In the advanced pulse mode the welder oscillates between AC and DC- polarity allowing fine fast freeze control on thin gauge aluminum, and greater penetration on thick plate aluminum. Although the unit may seem quite complex in its list of features, it's really quite simple due in part to the intuitive design which leads to quick and easy to setup whether you are a welding professional or just an enthusiast.

Product description

- Easy low amp 5 amp start DC, 20 amp AC. - Compact inverter design makes it one of the lightest and smallest AC/DC IGBT based inverter welders in its class. (Compare to Miller Diversion series.) - Now with STICK function - Simple, yet fully functional controls allow any user to make high quality welds. - Smooth stable arc in DC or AC with excellent wet in. - Automatic pre-flow greatly simplify setup and operation. 0Manual Pre flow , up to 10 seconds - Digital readout for precise control of welding amps in 2T mode. - 2T Function with the torch switch or the optional Foot pedal gives operator choices in out of position welding situations. - DINSE 25/50 style connectors allow easy adaptation of aftermarket torches and quick setup. -For portable use: Requires a Generator designated as "Clean Power" and capable of a MINIMUM 5000 W of continuous output. May require higher output, for best results

• Lightweight and portable ACDC and STICK wedler
• IGBT Infineon Modules, Many updates on 2016 model
• 185AMP @ 35% duty cycle on 220v /// 105AMP @ 35% duty on 110v
• 5 Year (Parts and Labor)
• 1/4 weld on single pass on alloy and 5/8 on steel

User questions & answers

Question:	Can the tig ac/dc 201 pulse d high frequency alununum tig 200 amp canaweld also weld stainless steel
Answer:	They come as a pair. One for each hand. These work the best becuase of the length.
Question:	Is there a thumb wheel controller that replaces the foot pedal a available
Answer:	Both! - it comes with two wraps
Question:	What is included in this combo pack
Answer:	Yes.
Question:	Is this the 2016 model
Answer:	I just got got this in the mail. It is indeed 1 single wrap.

Product features

Everlast PowerTIG 185 DV AC / DC TIG Stick Welder 110/220 Volt Inverter-based

- Easy low amp 5 amp start DC, 20 amp AC. - Compact inverter design makes it one of the lightest and smallest AC/DC IGBT based inverter welders in its class. (Compare to Miller Diversion series.) - Now with Stick function - Simple, yet fully functional controls allow any user to make high quality welds. - Smooth stable arc in DC or AC with excellent wet in. - Automatic pre-flow greatly simplify setup and operation. Manual Pre flow.

Minimum/Maximum:

Weld steel to a maximum of 5/16" single pass (240V)

Weld steel to a maximum of 3/16" single pass (120V)

Weld steel to a maximum of 1/2" multi-pass(240V)

Weld steel to a maximum of 3/8" multi-pass (120V)

Weld aluminum to a maximum of 1/4" single pass (240V)

Weld aluminum to a maximum of 1/8" single pass (120V)

Weld aluminum to a maximum of 3/8" multi-pass (240V)

Weld aluminum to a maximum of 1/4" multi-pass (120V)

Weld to a minimum of .007" Steel

Weld to a minimum of .020" Aluminum

Product description

Boil and bite design allows for custom molding of Mouthguard to maximize protection and comfort. Center breath channel allows for unobstructed air flow. Used for training protection. 100% EVA. BPA & Phthalate free.

User questions & answers

Question:	The discription of this mouthguard is suppose to be clear. In the picture why is it black
Answer:	Everlast manual states inrush amperage of 37 amps, so, a 40 amp circuit. Gage wire, copper or aluminum? Google NEC wire gage requirements .
Question:	if i have braces in my mouth, can i also wear this mouthguard
Answer:	120 V: 240 V: 35% @ 120A/24.8V 35% @ 200A/28V 60% @ 90A/23.6V. 60% @ 160A/26.4V 100% @ 55A/22.2V 100% @ 130A/25.2V
Question:	does this have a max air flow like shock doctor mouth guard
Answer:	I power this power with a 7500kw generator, but I only run it at 125 amps max for stick welding. Usually I have it at 90amps for 7018 and 6010 rods, welder runs great! If you want more than 160 amps or full power on the welder then you’ll probably need a 12kw generator. Just my advice do your own research please.
Question:	Does it have a center breath channel like max airflow shock doctor mouth guard
Answer:	15 pounds

Product description

If you are looking for an all around performer in the your fab shop, or need a go to unit on the work site, the PowerMTS 211SI has more than enough capability to handle most daily chores. As one of the newest multi-process welders in the Everlast PowerMTS line, the unit has been completely redesigned with the user in mind. This new digital inverter model features all the capability of previous generations but also adds synergic capability to the MIG component of the MIG/TIG/Stick welder. The synergic offers quick setup and use of the welder based off of user input of wire diameter and metal type. Manual override is always a choice when operating the unit in the Synergic mode so that the operator can fine tune the settings to the perform to his or her expectations. The unit features a standard MIG mode as well and setup is fully controlled by the operator. The welder is also equipped with a synergic spool gun mode for those that need it. Minimum/Maximum: MIG: Weld up to a maximum of 3/8" single pass* Weld up to a maximum of 5/8" multi-pass Weld a minimum of 24 gauge * Single pass welds greater than 1/4" are not recommended as a sound welding technique. TIG: Weld up to a maximum of 1/4" single pass Weld up to a maximum of 5/8" mult-pass Stick Weld with a maximum of 1/8" diameter electrode Weld with a minimum of 1/16" diameter electrode INCLUDES: 10 ft. Trafimet Series 15 MIG torch with Euro style quick connect fitting Stick electrode holder with 10 ft cable and 35 series DINSE-style connector Work clamp with 10 ft. cable and 35 series DINSE-style connector 12 ft. 26 Series TIG torch with cable and 35 series DINSE-style connector Spare consumable starter kit (does not include tungsten) Ar/CO2 Gas Regulator

• All digital DC CC/CV Multi-Process inverter design offers the perfect welder for nearly every task.
• Light weight design makes the unit extremely portable, ideal for jobsites and motorsports.
• Easy to use, operator friendly panel to select features.
• Adjustable Arc Force Control allows the user to dial in desired Stick welding performance.
• Adjustable Burn back control keeps wire energized after feeding stops to burn back the wire to a perfect length without needing to trim wire for restarts.

User questions & answers

Question:	Will the mig gun that comes with this unit work with 0.030 flux core or solid wire or do you have to buy different size
Answer:	unknown-
Question:	Does this unit run both ac and dc
Answer:	It comes equipped with a standard 120V NEMA 15-5P plug which works in pretty much any standard outlet. I have been using it on a standard 15A outlet with no tripping of the breaker and excellent welding performance.
Question:	Can you use mig tig stick on 110v or do you need 220v for some settings? On 110v about how thick can it weld (mild steel
Answer:	It would be set to DC+ same as mig wiring. You could run the wire through the normal gun but expect issues as I have found any gun length over about 4ft to be useless us less it is 4043 aluminum as it is more stiff.
Question:	is the acutual unit weight close to 80lbs listed by amazon? I'd like something portable
Answer:	SOMEONE IS STROKING U. IT DON'T COST THAT MUCH. PUT ON YOUR GLASSES ON. I KNOW THAT YOU HAVE TO PUT UR EYE GEAR ON TO PROTECT YOUR EYES.

Product features

Everlast PowerMTS 211Si MIG TIG Stick 200amp 110v/220v Multi Process new Welder

If you are looking for an all around performer in the your fab shop, or need a go to unit on the work site, the PowerMTS 211SI has more than enough capability to handle most daily chores. As one of the newest multi-process welders in the Everlast PowerMTS line, the unit has been completely redesigned with the user in mind. This new digital inverter model features all the capability of previous generations but also adds synergic capability to the MIG component of the MIG/TIG/Stick welder.

Includes :

- 10 ft. Trafimet Series 15 MIG torch with Euro style quick connect fitting.

- Stick electrode holder with 10 ft cable and 35 series DINSE-style connector.

- Work clamp with 10 ft. cable and 35 series DINSE-style connector.

- 12 ft. 26 Series TIG torch with cable and 35 series DINSE-style connector.

- Spare consumable starter kit (does not include tungsten).

- Ar/CO2 Gas Regulator.