10 best oxygen tank for welding

Product description

This handy oxygen regulator easily replaces the worn out regulator in your welding kit! An ideal item to have on hand for any welder, the oxygen regulator displays accurate pressure and includes 2" diameter gauges.

Inlet: 0-4000 PSI

Outlet pressure: 0-100 PSI

2'' diameter gauges

Inlet thread: CGA 540 female

Note: please kindly contact us if you find any problem with the product, thanks!

• This handy oxygen regulator easily replaces the worn out regulator in your welding kit! An ideal item to have on hand for any welder.
• High Quality Oxygen Regulator includes 2" diameter gauges and one valve to displays accurate pressure.
• Inlet(CGA-540) pressure range: 0-4000 psi; Outlet pressure range: 0-100 psi;Units of measure: kPa and psi.
• Regulator body is constructed of forged brass.durable and reliable to use.An T adjustment handle makes it easy to adjust pressure by hand.
• Wide Use:Designed for heavy-duty applications where high outlet pressure is required.Such as Cutting and welding.

User questions & answers

Question:	Will this fit a Victor Advantage tote kit? That uses #1 bottles
Answer:	Yes, it fits.
Question:	fit 151 oxegen tank
Answer:	I do not know for sure. I use it on a small welding tank for a.c. work.
Question:	What is the fitting that goes on the side for? Pop off valve or is the for a Argon tank
Answer:	There's one fitting for your oxygen hose. The other is a safety valve.
Question:	Does the regulator have "b" fittings
Answer:	I don't know what a "B" fitting is but it has standard fittings that fix a cutting rig.

Product description

High-quality 150 cu ft steel industrial oxygen cylinder. Heavy-duty construction with thick walls and durable painted finish. The tank has great low-temperature delivery. Guaranteed date of manufacture or hydro test within 180 days. DOT, ISO/UN, and TC approved. Please be sure to use a regulator that fits the cylinder valve, and that is correct for your application of use. Product note: compressed gas cylinders can be dangerous if used improperly. Please be careful, know the correct procedures for use, and exercise caution when connecting and using any compressed gas device. All cylinder ship empty. Please consult your local compressed gas supplier for filling needs.

• New, high-quality 150 cu ft steel oxygen cylinder with CGA540 valve
• DOT, ISO/UN, and TC approved. Thick walled steel tank, with the durability to stand up to any work site
• 7″ diameter, 47″ in height with valve - approximately
• All cylinder ship empty. Please consult your local compressed gas supplier for filling needs.
• Perfect for Welding, industrial, and medical applications.

Product description

All HP cylinders come with a 10 year hydrotest date stamped. All HP cylinders are within 2 years of stamped date. Meets DOT and/or ISO regulations. DOT number is stamped on the tank. Rated Safety on Valve: 3,360 psi. Manfacturer's Cylinder Specifications: 80 cu/ft Steel High Pressure Gas Cylinders: Working Pressure = 3AA2015, Test Pressure = 3360, Diameter = 7-1/4", Length = 32-1/2", Weight = 35 lbs. It is advised to contact your local gas supplier(s) to verify their policy on re-filling customer-owned cylinders. No Return on Full or Empty cylinders due to DOT regulations associated with the transport of the cylinders. In cases where damage occurs during transit, Weldfabulous will do our best to correct the issue. Please contact us for any questions or concerns. Shipping only available to Continental US (Lower 48 States).Understanding date stamps: The "hydrotest date" is the number stamped before the " + * " markings. The "service pressure" is the number stamped before the "SPUN" marking.

• All HP cylinders come with a 10 year hydrotest date stamped.
• All HP cylinders are within 2 years of stamped date.
• Meets DOT and/or ISO regulations.
• DOT number is stamped on the tank.
• Shipping only available to Continental US (Lower 48 States).

User questions & answers

Question:	Does it come with papers saying this is yours
Answer:	A place that fills welding tanks is looking for two things: 1. Is the tank a rental? 2. Is the tank not a rental? If the tank is a rental they will take the tank. If the tank is not a rental they will take your tank and exchange it for a full one.
Question:	Is this a mix gas bottle of 75argon 25co
Answer:	Have to ask the guy that is selling the bottle.
Question:	is this product made in US
Answer:	I'm not sure. I purchased it as a gift.
Question:	What is the weight of the tank
Answer:	An empty tank weights ~50 lbs.

Product description

A lightweight medium duty portable cutting/welding/brazing outfit with carrying stand. For commercial heating, ventilation, air conditioning and plumbing applications. Outfit Includes: Oxygen Regulator, Acetylene Regulator, Front Valve Torch Handle with Check Valves, Type17 #0, #2 Weld/Braze Tips, CA100 Cutting Attachment, and CT100-0 Cutting Tip. Packaging also includes oxygen and acetylene cylinders (shipped empty). Cylinders are UN/ISO Stamped, DOT and TC Approved. The UN/USA high-pressure cylinders are manufactured to UN-ISO-9809-1 and 2 specifications. An ISO certified cylinder is a universally accepted cylinder, and as such supersedes the DOT certification and can be filled/used under virtually any governing jurisdiction, including DOT and TC Canada. Physically they are the same cylinders that have been used for years. The cylinders have the same metallurgy, valves, and safeties. The markings however are different. The stamping layout details the marking scheme of the new ISO/UN/USA. A notice published by DOT several years ago informing the public of PHMSA (Pipeline and Hazardous Material Safety Administration) adoption of HM-220E. The adoption of HM-220-E allows a shipper to use either a DOT specification cylinder or a UN standard pressure receptacle, as appropriate for individual gases, and circumstances in the USA. Below is the public notice link to the DOT website: Guide To HM-220E Final Rule - ISO/UN/TC Cylinders.://.phmsa.dot.gov/staticfiles/PHMSA/DownloadableFiles/Files/PHH50_0078_0706_UN_Cylinders.pdf

• Weld up to 1/8" steel and Braze copper tubing up to 1" with supplied tips.
• Cut up to 1/2" steel with supplied tip
• Braze copper tubing up to 1" with supplied tips
• Outfit also includes: safety goggles, 12.5-Feet twin hose set, "A" connection, flint lighter, tank key, R Oxygen tank and Mc Acetylene tank, plastic carrying stand.
• Cylinders included: 20 cubic feet "R" Oxygen cylinder (empty) and 10 cubic feet "MC" Acetylene cylinder (empty)
• Cylinders are UN/ISO Stamped, DOT and TC Approved.

User questions & answers

Question:	How big are these tanks
Answer:	No, as long as the thank is at least 1/2 way empty !!! If is too low it might affect the performance of your work ...
Question:	made in china
Answer:	3b and 4b are the same they just come with different tips x-3b comes with A3 and A11 which would work good for what you are asking x-4b I believe comes with A5 and A14 tips
Question:	what is the gas capacity of the oxygen and acetylene tanks
Answer:	For a small refrigerator in confined space I would use a A-3 tip smaller flame and safer, but if the line is 3/8 to a 1/2 inch I would use a A-11, I suggest going to Home Depot buy a small roll of copper tubing and practice first once you are comfortable with your brazing skills then start the job every HVAC tec / welder takes time to practice.
Question:	Los tanques traen carga
Answer:	Not going to my truck to measure but it's really long, I'm using the kit for the smaller tank (gotta double-check that) and I have too much length.
Question:	Need a new tank amount gage for my turbo torch
Answer:	I have no idea. It's still in the case and I've never used it!
Question:	Which one for hvac brazing this the x-3b or x-4b? brazing with silver rod typically on 1" and smaller copper tube
Answer:	The tip that comes with this kit will work fine. Big does not mean better.
Question:	What size tip is the best or recommended for small lines on a refrigerator? For compressor and evaporator replacement
Answer:	Unsure what the question is?
Question:	Do they make a.6ft hose turbo torch
Answer:	Not familiar with hooking the hose to that type of gas source. Never seen that hook up before. I really don't think that is compatible. The red gas hose has left handed threads. The green for oxygen is right hand threads. Hope this helps.

Product description

A lightweight medium duty portable welding/brazing outfit with carrying stand. For commercial heating, ventilation, air conditioning and plumbing applications. Unitized packaging includes Oxygen and Acetylene cylinders (shipped empty). Cylinders are UN/ISO Stamped, DOT and TC Approved. The UN/USA high-pressure cylinders are manufactured to UN-ISO-9809-1 and 2 specifications. The industry, for years has been purchasing/using cylinders built to, tested to and approved to a DOT domestic code. An ISO certified cylinder is a universally accepted cylinder, and as such supersedes the DOT certification and can be filled/used under virtually any governing jurisdiction, including DOT and TC Canada. Physically they are the same cylinders that have been used for years. The cylinders have the same metallurgy, valves, and safeties. The markings however are different. The stamping layout details the marking scheme of the new ISO/UN/USA. A notice published by DOT several years ago informing the public of PHMSA (Pipeline and Hazardous Material Safety Administration) adoption of HM-220E. The adoption of HM-220-E allows a shipper to use either a DOT specification cylinder or a UN standard pressure receptacle, as appropriate for individual gases, and circumstances in the USA. Below is the public notice link to the DOT website: Guide To HM-220E Final Rule - ISO/UN/TC Cylinders.

http://www.phmsa.dot.gov/staticfiles/PHMSA/DownloadableFiles/Files/PHH50_0078_0706_UN_Cylinders.pdf

• Weld up to 1/8" steel and Braze copper tubing up to 1" with supplied tips.
• 12 piece outfit includes: Oxygen regulator, Acetylene regulator, front valve torch handle, Type17-0 and Type17-2 weld/Braze tips.
• Outfit also includes: safety goggles, 12.5-Feet twin hose set, "A" connection, flint lighter, tank key, R Oxygen tank and Mc Acetylene tank, plastic carrying stand.
• Cylinders included: 20 cubic feet "R" Oxygen cylinder (empty) and 10 cubic feet "Mc" Acetylene cylinder (empty).
• Cylinders are UN/ISO Stamped, DOT and TC Approved.

User questions & answers

Question:	Are both oxygen and acetylene tanks DOT certified
Answer:	Hi, Good morning Yes
Question:	Will regular size regulators and hoses fit and connect to these small bottles
Answer:	United refrigeration
Question:	Will the acetylene regulator handle MAP gas without damaging its internals
Answer:	I had to replace acetylene regulator mine did not work on any tank from praxair. So no good everything else work ok the hose that come with it is cheap but it works

Product description

***READ THIS BEFORE YOU BUY*** Please check all the Pictures with the Dimensions of the Connectors, and make sure that these Regulators fit your Tanks and Hoses. Small regulator for portable Oxy-Acetylene Welding and Cutting Kits Rear Connector CGA-540 fits all Oxygen Tanks and CGA-200 fits Acetylene MC Tanks Solid machined brass body Standard 9/16" - 18 RH & LH Outlet Hose Fittings Oxygen Delivery Gauge: 0-100 PSI / Acetylene Delivery Gauge: 0-30 PSI

• ***PLEASE READ THIS INFORMATION CONCERNING THIS REGULATOR´S CONNECTORS***: Select any of the options of regulators; Oxygen, Acetylene, or Propane and carefully check, read and make sure you understand the information shown in picture #2. Check all the Pictures with the Dimensions of the Connectors, and make sure that these Regulators fit your Tanks and your Hoses.
• ***READ THIS***: Small Oxygen Regulator fits all American Oxygen Tanks with CGA-540 Valve, (It will NOT fit any disposable oxygen canisters) - Oxygen Delivery Gauge: 0-100 PSI
• ***READ THIS***: Small Acetylene Regulator fits ONLY Small Acetylene MC tanks with CGA-200 valve. (It will NOT fit larger acetylene tanks, it will NOT fit any propane tanks and it will NOT fit any disposable MAPP or Propane Canisters) - Acetylene Delivery Gauge: 0-30 PSI
• ***READ THIS***: Small Propane Regulator fits ONLY industrial or grill style Propane tanks with CGA-510 valve. (It will NOT fit small MC or B acetylene tanks, and it will NOT fit any disposable MAPP or Propane Canisters) - Propane Delivery Gauge: 0-30 PSI
• ***READ THIS****: The hose connectors on these regulators are Type B - 9/16" - 18 RH & LH. This regulator will NOT fit small hoses with small Type A - 3/8" connectors.

User questions & answers

Question:	what size are the gauges
Answer:	Normal size for gauges, not smaller or larger than normal.
Question:	does it work for medicinal oxygen
Answer:	No they Do not medical oxygen regulators are more precise
Question:	npt connection or 1/4"bsp connection to the propane flare
Answer:	None of them. The outlet connector is 9/16"-18LH, check all the pictures for more information
Question:	My screws into the oxgen bottle not over it do you sell one that screws in the bottle
Answer:	Hello. All American Oxygen Cylinders have CGA-540 valves and this regulator will fit on those. If you check the valve of your oxygen tank it must has written CGA-540.

Product description

High-quality 60 cu ft steel oxygen cylinder. Heavy-duty construction with thick walls and durable painted finish. The tank has great low-temperature delivery. Guaranteed date of manufacture or hydro test within 180 days. DOT, ISO/UN, and TC approved. Please be sure to use a regulator that fits the cylinder valve, and that is correct for your application of use. Product note: compressed gas cylinders can be dangerous if used improperly. Please be careful, know the correct procedures for use, and exercise caution when connecting and using any compressed gas device. All cylinder ship empty. Please consult your local compressed gas supplier for filling needs.

• New, high-quality 60 cu ft steel oxygen cylinder with CGA540 valve
• Thick walled steel tank, with the durability to stand up to any work site
• 7″ diameter x 22.5″ in height with valve - approximately
• All cylinder ship empty. Please consult your local compressed gas supplier for filling needs.

Product description

All HP cylinders come with a 10 year hydrotest date stamped. All HP cylinders are within 2 years of stamped date. Meets DOT and/or ISO regulations. DOT number is stamped on the tank. Rated Safety on Valve: 3,360 psi. These are filled at industry standard of 2,015 psi. Prior to shipping, we test each cylinder for 2,015 psi to ensure there are no leaks. Manfacturer's Cylinder Specifications: 125 cu/ft Steel High Pressure Gas Cylinders: Working Pressure = 3AA2265, Test Pressure = 3775, Diameter = 7-1/4", Length = 41-1/2", Weight = 50 lbs. It is advised to contact your local gas supplier(s) to verify their policy on re-filling customer-owned cylinders. No Return on Full or Empty cylinders due to DOT regulations associated with the transport of the cylinders. In cases where damage occurs during transit, Weldfabulous will do our best to correct the issue. Please contact us for any questions or concerns. Shipping only available to Continental US (Lower 48 States). All full cylinders are shipped via FedEx Ground with Signature Required by the person on the shipping address, at the time of delivery. Please provide a first and last name, and a physical address for shipping (no PO Boxes). Orders without a first and last name, and a physical address will automatically be canceled.Understanding date stamps: The "hydrotest date" is the number stamped before the " + * " markings. The "service pressure" is the number stamped before the "SPUN" marking.

• All HP cylinders come with a 10 year hydrotest date stamped.
• All HP cylinders are within 2 years of stamped date.
• Meets DOT and/or ISO regulations.
• DOT number is stamped on the tank.
• Shipping only available to Continental US (Lower 48 States).

User questions & answers

Question:	How is this cylinder shipped full
Answer:	It has a metal shroud, threaded over the valve to protect it. Mine came full and beautiful and quick!
Question:	Hi, could i use this tank for mig welding (argon+co
Answer:	Wrong value connection, look for one for Co2
Question:	El tanque viene lleno
Answer:	Hola amigo, viene vacio el tanque de oxigeno.
Question:	Cuántas libras pesa el tranque
Answer:	Ese cilindro pesa como 59lb

Product description

Oxypropane BRAZING TORCH

This is a professional high heat cutting oxymapp torch, it is fueled by MAPP/MAP PRO/Propane with Oxygen, it can reach a super higher temperature (6432℉/3000℃) compare with the torch fueled without Oxygen. The tank is shown on the picture.

The gas valve equip pressure gage on it, you can working without extra pressure gage.

Since the torch will connect to the gas tank and oxygen tank, the pressure difference between gas tank and oxygen tank will lead to back fire, for this torch, we design a anti-back fire system in the valve, and with the pressure gage on the valve, you can ajust the pressure, both of these make this torch extreme safety.

The nozzle is shown on the picture, made by high standard brass, pin point tip flame nozzle, 100% anti-backfire.

It has two set of valves, you can adjust the gas/oxygen near the tank or on the handle.

Specification:

Material: Brass

Temperature: 6432℉ (3000℃)

Notice: the tank is not included, and make sure that you choose the right gas tank, the gas tank is shown in the picture.

Inside the package:

Oxygen Mapp Torch X1. If you'd like the torch with gas cylinder stand rack, you can find in our store.

• 100% ANTI-BACKFIRE| The fire won't back to the gas tank since the safety design of the valve, extreme safe
• SELF-PRESSURE MEASURE| The gas valve equip pressure gage on it, you can working without extra pressure gage
• HIGH TEMPERATURE| Up to 6432℉ (3000℃)
• SECOND VOLVE ON THE HANDLE| Convenient to gas adjustment on handle
• PRECISE FLAME

Product description

MAPP & OXYGEN BRAZING TORCH SET

This is a professional high heat cutting oxymapp torch, it is fueled by MAPP/MAP PRO/Propane with Oxygen, it can reach a super higher temperature (6432℉/3000℃) compare with the torch fueled without Oxygen. The tank is shown on the picture.

The nozzle is shown on the picture, made by high standard brass, pin point tip flame nozzle, 100% anti-backfire.

It has two set of valves, you can adjust the gas/oxygen near the tank or on the handle.

Specification:

Material: Brass

Temperature: 6432℉ (3000℃)

Notice the tank is not included

Inside the package:

Oxygen/MAPP Cutting/Welding Torch X1

Cylinder Stand Rack X1

Flint Spark Lighter X1

Glassed X1

• HIGH TEMPERATURE| Up to 6432℉ (3000℃)
• 100% ANTI-BACKFIRE| The valve is anti backfire design, prevent the tank from exploding, More secure
• SECOND VOLVE ON THE HANDLE| Convenient to gas adjustment on handle
• Come with Cylinder Stand Rack X1, Flint Spark Lighter X1, Glasses X1
• The nozzle won't be burned after long time use

User questions & answers

Question:	Does this come with tanks
Answer:	No it dosen't come with tank. It come with 1torch, 1 glasses, 1 tank stand, 1 Flint Spark Lighter