12 best cutting torch sets

A cutting torch set is a critical tool in welding and metalworking, designed for cutting through metal using a combination of oxygen and a fuel gas, typically acetylene. These sets are used in various applications, including metal fabrication, construction, automotive repair, and more.Here's what you should know about cutting torch sets:

Components: A typical cutting torch set consists of several components, including:
- Cutting Torch: The torch is the main tool used for cutting metal. It features a handle, oxygen valve, fuel gas valve, and a cutting tip. The cutting tip is where the oxygen and fuel gas mix and ignite to create a high-temperature flame for cutting.
- Fuel Gas Regulator: The fuel gas regulator attaches to the fuel gas cylinder (usually acetylene) and regulates the flow of gas to the torch. It ensures a consistent and safe supply of fuel gas.
- Oxygen Regulator: Similarly, the oxygen regulator connects to an oxygen cylinder and controls the flow of oxygen to the torch. Oxygen is used to support combustion and intensify the cutting flame.
- Hoses: High-pressure hoses connect the regulators to the torch. These hoses are designed to handle the flow of gases safely.
- Flashback Arrestors: These safety devices are often added to the hoses to prevent the flame from traveling back into the hoses or cylinders, reducing the risk of accidents.
- Welding Goggles: Welding goggles or a welding helmet with a suitable shade are essential to protect the user's eyes from the intense light generated during cutting.
Types of Cutting Torches:
- Oxy-Acetylene Torch: This is the most common type of cutting torch set, which uses a combination of oxygen and acetylene for cutting. It offers a high-temperature flame suitable for cutting a wide range of metals.
- Oxy-Propane Torch: Some cutting torch sets use propane as the fuel gas instead of acetylene. Propane torches are often used for lighter cutting tasks but may not reach the same cutting temperatures as acetylene.
Cutting Process: To cut metal using a cutting torch, the torch operator first adjusts the oxygen and fuel gas flow rates to achieve the desired flame. Then, the torch is ignited, and the flame is directed onto the metal to be cut. The intense heat from the flame causes the metal to melt, and a high-velocity jet of oxygen blows away the molten metal, resulting in a clean cut.
Safety: Safety is paramount when using cutting torch sets. Users must be trained in their proper operation and follow safety guidelines to prevent accidents, such as ensuring adequate ventilation, wearing appropriate protective gear, and regularly inspecting equipment for leaks and damage.
Applications: Cutting torch sets are used in various applications, including cutting and shaping metal for welding, dismantling old structures, and salvaging metal components.

In summary, a cutting torch set is an essential tool for cutting metal in various industrial and welding applications. It consists of a cutting torch, regulators, hoses, and safety equipment and relies on the controlled combustion of oxygen and a fuel gas to generate the high-temperature flame needed for metal cutting tasks. Proper training and safety precautions are essential when using cutting torch sets to ensure both effective cutting and user safety.

Below you can find our editor's choice of the best cutting torch sets on the market

Genuine Victor Torch Kit Cutting Set, CA411-3, WH411C, 0-3-101 Tip, Striker

Based on 68 reviews Check latest price

WH411C Torch Handle with Built-in Check Valves
CA411-3 Cutting Attachment
0-3-101 Cutting Tip
0-UM-350 Brazing Tip
*** Torch Set has been repackaged. Items not in original packaging.

User questions & answers

Question:	What grade is this set.... light or medium duty
Answer:	No these will not work with propane in the whole different system to run propane actually it might be a little bit cheaper the other systems
Question:	Is this product from China
Answer:	You change the tip size to alter what thickness it will cut best
Question:	What is the length of this torch
Answer:	No it wont this is for big tanks only
Question:	is this kit be used with the mini torch tank set up
Answer:	You need to clarify what you mean by larger size. Are you asking about the series size as in series 3 or series 1 ? Or are you asking about the tip opening size as in 0 through 1,2,3,4,5,6 etc. Yes you can buy larger size tips, however you cannot use series 1 tips. This torch uses 3-101 series tips. not 1-101 series. It is a medium duty torch with a smaller cutting attachment. If you are cutting large thick pieces of steel regularly this may not be the right torch for you. If you need it occasionally for automotive work etc. it will be fine. Search for 3 series tips, they come in many sizes.

Stark Gas Welding & Cutting Torch Kit Oxy Acetylene Oxygen Brazing Professional Set Victor Type, Carrying Case

Based on 31 reviews Check latest price

Product description

Here's a complete oxy-acetylene welding kit to handle a broad range of cutting, welding, and heating applications. Comes with hoses, welding and cutting torches, goggles, tip cleaners and striker packed in a heavy duty molded storage case.

Features:

Precision welding, cutting, brazing, soldering, hand facing and more! It'll cut up to 6" and weld or braze up to 1 / 2 " with appropriate tips
High-capacity Oxygen and Acetylene regulators, with a full 2 1/2" diam. for optimal performance
Deluxe single stage regulators with reverse flow check valves, brass torch handle and brass valve body for maximum strength and durability
Precision torch handle with dual check valves, cutting attachment and cutting tip (size No. 0)
UL-listed cutting torch and rosebud heating tip (size No. 6)
3 welding nozzles (size No. 0, No. 2, No. 4), all with a swaged tip and individual spiral mixer
Flint striker tool and goggles with a No. 5 shade
The whole Kit is constructed of stainless steel and brass for durability
Perfect for an Amateur Metalworker or a Seasoned Professional
All-brass torch handle and check valves
Brass and steel cutting torch attachment
Brass and copper welding/heating tip
This is not a Victor Brand

Specifications:

Material: Brass Torch, Poly Carrier
Nozzle Size: #0 Cutting / #0, #2, #4 Welding
Hose Length: 15ft
Cutting Capacity: 1/2"
Welding Capacity: 3/16"
Oxygen Regulator: CGA 540
Acetylene Regulator: CGA 540

Package Contents:

Precision welding, cutting, brazing, soldering, hand facing and more! It'll cut up to 6" and weld or braze up to 1/2" with appropriate tips.Perfect for an Amateur Metalworker or a Seasoned Professional
Various kinds using oxygen and gas fuel for portable welding, rivet cutting, soldering, brazing, hard-facing and metal heating process
Deluxe single stage regulators with reverse flow check valves, brass torch handle and brass valve body for maximum strength and durability. Precision torch handle with dual check valves, cutting attachment and cutting tip (size No. 0)
A complete set includes a torch handle, oxygen regulator and acetylene regulator
Victor-style welding kit includes multiple nozzles, hoses and fittings for all purpose welding, soldering, and other applications

User questions & answers

Question:	Will this work with Gas pony tanks
Answer:	No it is not an AC Tig. Appears to be the same as the Lotos LTPDC2000D 1 way to weld Aluminum is stick welding using an Aluminum electrode You can also purchase a tank of Helium which is EXPENSIVE and then Tig weld Aluminum DC a better choice for welding Aluminum in the Primeweld brand would be the AC/DC Tig 225X ( if in stock ) https://www.amazon.com/PRIMEWELD-Stick-Welder-PULSE-WARRANTY/dp/B07BXHRBQ8/ref=pd_rhf_se_p_img_1?_encoding=UTF8&psc=1&refRID=K3CXA6K5Q5HN40DGVHE9
Question:	Will this fit small tanks to
Answer:	Though I have not tried one, the foot pedal from other welders that share the same CT520D series model designation should work as long as it has the 5 Pin connector. One example being the offering from Lotos. You may want to contact Primeweld before actually hooking one up.

KUNTEC Victor Style Cutting Torch CA1350 & 100FC Acetylene Oxygen Welding Cutting Torch Set

KUNTEC

Based on 2 reviews Check latest price

Product description

Features:

High quality medium duty three piece torch kit, CA1350 cutting attachment, 100FC torch handle

Constructed with high strength alloy, heavy duty stainless steel and durable brass

Cutting torch and handle are ready for multiple gas options; Oxy-Acetylene, Propane, Butane, Natural and LP Gases, and Propane

Connection: B fitting (9/16" - 18), 1pc 3#101 cutting nozzle,built in reverse flow check valves no need for accessory check valves

Rear-mounted pressure handle switch is easy to operate

Package includes:

1 set of torch handle

1 set of cutting attachment

1 piece cutting tip

90 degree head For use with multiple gas types: Oxy-Acetylene, Propane, Butane, Natural and LP Gases, and Propane
Brass coupling nut & double o-ring tapered seal gives quick gas-tight seal without a tightening wrench.
Connection: B fitting (9/16" - 18), 1pc 3#101 cutting nozzle,built in reverse flow check valves no need for accessory check valves
Constructed with high strength alloy, heavy duty stainless steel and durable brass
Package includes: 1 set of torch handle, 1 set of cutting attachment, 1 piece cutting tip

ZenStyle Oxygen & Acetylene Gas Cutting Torch and Welding Kit Portable Oxy Brazing Welder Tool Set with Two Hose,Goggles,Regulator Gauges,Storage Case

Based on 421 reviews Check latest price

【Top Quality】Our cutting torch and welding kit adopt high quality strong materials with heavy duty construction.Durable and sturdy for use.The set includes oxygen regulator,torch handle,acetylene regulator.
【Outstanding Performance】The oxygen & acetylene welding kit enables you to cut up to 6” and weld or braze up to 1/2” with appropriate tips. Full 2 1/2” diam high capacity oxygen and acetylene regulators provide optimal performance. Acetylene Tank Connector: CGA-510 Fits all Acetylene Cylinders EXCEPT Sizes MC and B;Oxygen Tank Connector: CGA-540 Fits all American Oxygen Cylinders.
【Considerate Design】The welder tool set comes with readable and legible dual scale 2-Inch gauges.And a large brass handle is designed for smooth,accurate adjustments.
【Complete Accessories】The portable oxy brazing welder features with hoses,welding and cutting torches,goggles,tip cleaners and spark lighter.There is a heavy duty molded storage case packing a spanner for easy carrying and transport.
【Wide Range Uses】The gas welding kit is perfect for amateur metalworker or seasoned professional with business or home application.Ideal for many occasions such as welding,soldering,brazing,rivet cutting,hard-facing and metal heating process. Tips: Take the set to your local welding supply if you don't know what tanks to buy to complete this,they will fit you proper tanks needed.

User questions & answers

Question:	Will uniweld torch tips work with this kit
Answer:	I don't know. I bought mine a while back.
Question:	Want to get these as gift. what tanks should i buy to complete this and get it ready for use? (size, name type? i have no clue) answers appreciated
Answer:	My dad in a different state need it so I got it shipped to his house. Sorry have no idea
Question:	Will these gauges fit the non-refillable oxygen and map gas bottles? Also, can i use the acetylene gauge for map gas
Answer:	No they are not and the oxygen regulator does not read accurately at the low 2-4 pound level that I need often. Had to replace it with a better guage.
Question:	Will this kit fit MC acetylene and R oxygen tanks
Answer:	This kit will just need a cutting tip designed for propane purposes. The acetylene regulator will technically work with propane as it designed to connect to another CGA-510 valve. The kit also comes with a grade t hose which is appropriate for running with fuel gases aside from just acetylene.

Genuine Victor CA1350 & 100FC Cutting Torch Set

Based on 22 reviews Check latest price

Product description

90 deg head For use with all gas types (Oxygen, Propane, Acetylene) Built-in flashback arrestors Built-in reverse flow check valves. Connection: B fitting (9/16" - 18). Spiral mixer blends oxygen & fuel. Stainless steel tubes. Brass coupling nut & double o-ring tapered seal gives quick gas-tight seal without a tightening wrench.

Genuine Victor CA1350 and 100FC

User questions & answers

Question:	small auto shop need to cut up to 1/4 " at times mostly exhaust. will pureoxe welding tips fit the end
Answer:	Yes and it's 5mm to the 2nd power.. In other words #10 awg . It's about 5' long, can be wire for 120v or 240v.. Mine has always been wired for 240volt that way I can switch between welder and plasma cutter.. You will need to furnish the male plug end..

ABN Oxygen & Acetylene Torch Kit – 10 Pc Welding Kit Metal Cutting Torch Kit, Portable Cutting Torch Set Welder Tools

Based on 131 reviews Check latest price

OXY ACETYLENE TORCH KIT: The ABN Oxygen Acetylene Torch Kit for Welding and Cutting is a 10 piece kit that comes in a heavy-duty plastic blow-molded case for easy storage and transportation; Whether you are an amateur metalworker or a seasoned professional, this gas welding torch kit is easy to use and allows you to cut, weld, braze, and solder with precision and efficiency
EASY TO USE: To use this torch, attach the appropriate tip for your project, connect the oxygen and gas tank to the torch handle, and set the PSI to the necessary positions; Once you have ignited and adjusted to a neutral flame, move the flame to the metal and push the valve handle slowly; Move the torch tip slowly along the line of your cut until the metal has fully parted
CREATING A NEUTRAL FLAME: A neutral flame creates carbon dioxide that purges air from the heated metal for easier cutting and welding; To create a neutral flame, you must find the correct relationship of oxygen to acetylene; After adjusting the pressure and connecting the oxygen and acetylene tank systems to the brazing torch kit, open the acetylene gauge and light the torch; Begin opening the oxygen valve and continue adding oxygen until sharp cones are created at the tip of the portable torch
BUILT TO LAST: Constructed of heavy-duty metal parts, this welding torch set is ideal for first-time metal workers; This brazing kit is designed with copper tips and brass fittings for strength, durability, longevity, and precision; The plastic blow molded case provides safe storage for this portable torch kit
CONTENTS: Oxygen and acetylene torch set includes the following pieces: Torch handle with regulator valve knobs, copper welding torch tips attachments, cutting attachment, iron chrome-plated igniter, brass joints, tip cleaner, and storage case; Always wear goggles or facemasks, gloves, and flame-retardant aprons or other clothing when working with this tool to protect from accidents (protective gear not included)

User questions & answers

Question:	Does this use A or B hose fittings
Answer:	It has a standard US 120V plug, and it comes with an adapter to plug into a 6-50R style 240V 50amp socket. The leads for stick welding are 5 feet long - annoying short. The TIG lead is longer.
Question:	Is it Victor compatible
Answer:	No rods but two short tungstens. If like me you are new to TIG welding you may mess them up so plan on getting more and longer ones. Also learn to shsrpen them, I went tu YouTube to learn. Hope this helps.
Question:	What sizes are the included welding tips
Answer:	It comes with a #9 Tig torch, with a thumb switch zip-tied to the handle of the torch. The #9 torch is rated for 125amps, so keep that in mind as the welder goes up to 200. There is no tungsten included, but there is one collet body and two collets for 1/16th rod, and two small #4 cups. It also includes the stick holder, ground clamp, and a length of clear hose with two hose clamps, as the gas input has only a barb and does not take a standard inert gas hose.
Question:	Is this the same as the Victor J series
Answer:	Yes the ct520dp has the pilot arc, the ct520d has the scratch start.

Product features

About the ABN 10-Piece Oxygen & Acetylene Welding & Cutting Torch Kit

The ABN Welding and Cutting Torch Kit Acetylene Oxygen Torch Set is a 10-piece gas torch kit that comes in a heavy-duty plastic blow-molded case for easy storage and transportation.

*Always wear goggles, gloves, and flame-retardant aprons or other clothing when working with this tool.

A Closer Look

This kit is easy to use and allows you to cut, weld, braze, and solder with precision and efficiency.

EASY TO USE

Attach an appropriate tip, connect the oxygen and gas tank to the torch handle, and set the PSI to the necessary positions. Once you have ignited and adjusted to a neutral flame, move the flame to the metal and push the valve handle slowly. Move the torch tip slowly along the line of your cut until the metal has fully parted.

BUILT TO LAST

Constructed of heavy-duty metal parts, this brazing kit is designed with copper tips and brass fittings for strength, durability, and longevity.

Genuine Victor Torch Kit Cutting Set, CA411-3, WH411C, 0-3-101 Tip, 20' Hose

Based on 61 reviews Check latest price

WH411C Torch Handle with Built-in Check Valves
CA411-3 Cutting Attachment
0-3-101 Cutting Tip
0-UM-350 Brazing Tip
20' x 3/16" Grade R Torch Hose, Goggles and Striker

User questions & answers

Question:	What other Brazing tips fit this handle I see it comes with a zero our larger ones available in what series would that be
Answer:	Please buy from ASIN B07F3DLPF9
Question:	Does this model have a built in Spark Arrestor
Answer:	prime get free shipping.
Question:	which rosebud works with this handle
Answer:	These are not DOT approves so you may have some difficulty it just depends on where you fill the item
Question:	How thick of metal does is this torch able to cut
Answer:	tanks are not DOT approved
Question:	Can i get cutting torch only
Answer:	It is imporant that the threads match and the fitting seals, otherwise you are likely to have a gas leak and possible back fire. Note that this is a heavy duty, 300 series. Medium duty nozzles have a smaller thread on the coupling and will not fit onto this handle.
Question:	can someone tell me the approx. shipping weight of this kit
Answer:	This is a heavy duty torch，the total length of it is 20 inch.
Question:	If the tanks are not DOT approved is it going to be difficult to have them filled
Answer:	Yes, it is.
Question:	Are the tanks DOT certified
Answer:	Which part

Product features

Oxy Welding Cutting Weld Torch Tank Kit

Light duty acetylene (VLAR-18) and oxygen (VLOR-18) rear mount regulators
Medium duty torch handle (VTHM-22) and cutting attachment (VCAM-22)
Cutting tip (0-3-101) cuts up to 1/2"
Welding nozzle with mixer (0-W-1) welds up to 5/64
12.5 feet of 3/16" twin “T” grade hose with CGA “B” fittings
Glasses, Spark Lighter & Check Valves

FlameTech - AZ-VMCATH-CS VMCATH-CS Medium Duty Torch Handle and Cutting Attachment Set, Victor Compatible

Flame Technologies, Inc.

Based on 16 reviews Check latest price

Product description

Flame Tech Medium duty torch handle and cutting attachment set is compatible with Victor products. Set of 1 each medium duty torch handle and cutting attachment. Lower price point than individual items. Always Includes free size zero medium duty cutting tip. Free item included (subject to change). Specifications. VTHM-22 with Check Valves. VCAH-22. 0-3-101.

Set of 1 each medium duty torch handle and cutting attachment
Compatible with Victor products
Lower price point than individual items
Available in clamshell packaging

User questions & answers

Question:	Will this torch accept Victor tips
Answer:	The temp protect feature seems faulty in some units. If it ever comes on, it may never function again. I had to return mine because it stopped working on the first day and never worked again.

Victor Type CA2460 Cutting Attachment 315FC Torch Handle Oxygen/Acetylene Cutting Welding Torch Tool Set

Based on 20 reviews Check latest price

Product description

Package includes:

1*315FC torch handle

1*CA2460 cutting attachment

Made from high strength alloy, heavy duty stainless steel and durable brass

Heavy Duty cutting torch set
Including 1 cutting attachment and 1 torch handle
Match Victor 1-101 series,GPN series cutting tips

User questions & answers

Question:	Is this a Victor made torch
Answer:	We have it on a 20gal 1 horse compressor. It only meeds 30-35 comtinuous psi.

Genuine Victor CA2460+ & 315FC+ Cutting Torch Set - BRAND NEW

Based on 6 reviews Check latest price

Product description

Genuine Victor CA2460+ & 315FC+ Cutting Torch Set - BRAND NEW MPN: 0381-1928, 0382-0093 Model: CA2460+, 315FC+ CA2460+ (0381-1928) 90 deg head For use with all gas types (Oxygen, Propane, Acetylene) Die-forged brass head Spiral mixer blends oxygen & fuel Smooth cutting valve (push type) Stainless steel tubes Length: 10" Weight: 1.75 lb 315FC+ (0382-0093) Works with all fuel gases (Oxygen, Acetylene, Propane) Built-in flashback arrestors Built-in reverse flow check valves Connection: B fitting (9/16" - 18) Length: 9 in Weight: 1.5 lbs

CA2460 Torch - Esab Part# 0381-1928
315FC Handle - Esab Part# 0382-0093

User questions & answers

Question:	is this it compatible with victor mod.1056c
Answer:	L6-30P

4 Pieces Torch Tip Cleaner Set Carb Carburetor Jet Cleaner for Cleaning Welding Cutting Nozzles/Tips, Gas Orifices, Sprinklers and Shower Heads, 13 Wire Set

Based on 159 reviews Check latest price

What you will get: 2 pieces 5 inches (130 mm) and 2 pieces 3 inches (75 mm) tip cleaners; Each welding tip cleaner includes 13 wire files in different lengths, which can meet your different need; All includes a flat file
Quality material: the torch tip cleaner tool is made of quality stainless steel and comes with a lightweight, compact aluminum carrying case, a practical tool are easy to carry and use,13 pieces wires set with spiral knurling for cleaning common size jets and carb body holes passages
Different diameters and lengths: the carburetor cleaning kit comes with 13 different diameters, especially designed to clean out the tiny jets and carb passages from dirt; The wire sizes are 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1, 1.2, 1.3, 1.4, 1.5, 1.6 mm; The length of small set is 2.6 inches (66 mm) and big set is 4.5 inches (112 mm)
Wide application: these carb cleaning tools are useful to clean small orifices such as nozzles, air tools, camping stoves and so on; And they are suitable for most auto motorcycles, ATV, welder, tattoo device, lawn equipment and many other power sport carburetor
Resuable cleaning tools: the carbon jet cleaner can be applied multiple times as long as you use it correctly; Quality stainless steel materials are not rusty and easy to clean; This supply will last the life of your carburetor and other machines

384-0947 Victor Portable Tote Torch Kit Set Cutting Outfit Without Cylinders

Victor ESAB

Based on 18 reviews Check latest price

G150-60-540R Oxygen Regulator, G150-15-200R Acetylene Regulator
CA1260 Cutting Attachment, SKH-7A Torch Barrel
SKW-2 and SKW-0 Nozzle. 0-3-101 Cutting Tip
Grade "RM" Hose. Striker. Goggles
Cylinder Wrench with Chain. Rugged molded plastic carrying case

User questions & answers

Question:	I assume this holds 20cf oxygen r and 10cf acetylene mc cylinders
Answer:	No. Good for small weeds in driveway cracks. Great for starting fires in smoker or fire pit.