10 best forney blow guns

Product description

The Forney 75529 Deluxe Air Blow Gun Kit is an all-purpose deluxe blow gun kit with four interchangeable nozzles for cleaning and deflating. Complete with standard nozzle, rubber tip nozzle, tapered nozzle and ball inflator. Perfect for blowing sawdust and grass clippings, drying surfaces or inflating balls, rafts and air mattresses. Forney Industries is one of America’s longest operating family-owned metal working product companies. Founded in 1932, Forney offers more than 5,000 products for the hardware, automotive, farm & ranch and do-it-yourself markets. For more information, visit www.forneyind.com. If you’ve got metal working questions, we’ve got answers. We’re committed to your success regardless of location size or needs. Please contact our team at [email protected]. Deluxe Air Blow Gun Kit. For use on a regulated air line with a pressure setting not to exceed 30 PSI. Claims for warranty must be made within 90 days of the date of purchase. Proof of purchase required. This warranty does not cover any product that has been subject to misuse, neglect, negligence or accident, or that has been used in any way contrary to the purpose intended.

• All-purpose deluxe blow gun kit with four interchangeable nozzles for cleaning and deflating
• Complete with standard nozzle, rubber tip nozzle, tapered nozzle and ball inflator
• Perfect for blowing sawdust and grass clippings, drying surfaces or inflating balls, rafts and air mattresses
• Always handy around the home
• For use on a regulated air line with a pressure setting not to exceed 30 PSI

User questions & answers

Question:	I usually have my air gun pressure set at about 100 psi. I assume that I will only get 30 psi from this gun
Answer:	I also use this when my compressor is set to 125 psi without a problem. The rubber protective tip will fly off at the higher pressure settings, its not a big problem and only exposes the metal tip.

Product description

The Forney 75337 lever-type blow gun with 4 foot extension and rubber tip is zinc alloy with blue zinc coating. Extension is aluminum with oxidized finish. For use on regulated compressed air lines. Forney Industries is one of America's longest operating family-owned metal working product companies. Founded in 1932, Forney offers more than 5,000 products for the hardware, automotive, farm and ranch and do-it-yourself markets. If you've got metal working questions, we've got answers. Were committed to your success regardless of location size or needs. Lever-type blow gun with 4-foot (101.6mm) extension and rubber tip. Recommended working pressure of 90 PSI. Max working pressure is 150 PSI. Claims for warranty must be made within 90 days of the date of purchase. Proof of purchase required. This warranty does not cover any product that has been subject to misuse, neglect, negligence or accident, or that has been used in any way contrary to the purpose intended.

• Recommended working pressure of 90 PSI
• Max working pressure of 150 PSI
• Blow gun is zinc alloy with blue zinc coating
• 4-foot extension is aluminum with oxidized finish
• For use on regulated compressed air line

User questions & answers

Question:	does this tool come apart in half
Answer:	no it does not
Question:	Is it possible to connect two together to make an 8 foot extension
Answer:	you can if you cut the bit of angled tube off the tip. then re-thread the tube and use a union. unless you want that particular angle to the tube length.
Question:	how to assemble a 3 foot air blow pipe and being able to take it apart in half
Answer:	It cam pre assembled and I have needed to take it apart
Question:	what is the difference in the 2 tips? other than one is covered with rubber
Answer:	The difference in tips is the rubber tip is more concentrated air stream than the brass tip. The brass tip has a center orifice as well as holes around the outside of the tip. Thank you for your question.

Product features

WE ARE WELDING

It’s been almost 90 years since Forney Industries was established with James D. Forney began selling his invention of “The Forney Instant Heat Soldering Iron” door-to-door across the heartland. With ingenuity and determination, JD advanced his business. It didn’t take long for farmers and ranchers to realize how useful his inventions were. Eventually the Rural Electric Association granted permission for salesmen to climb utility poles to hook up welders for demonstrations. With the increased exposure to JD’s products, his business began to expand. Soon he would broaden product variety with battery chargers, welding supplies and more. By 1943, Forney Industries had over 1,400 products from 150 outside suppliers.

Today, Forney offers thousands of metalworking products within four categories: welding, abrasives, personal protective equipment and shop tools. JD Forney’s grandson, Steve Anderson, is now the President and CEO of Forney Industries, and is committed his customers success; a legacy his grandfather began all those years ago. One day JD’s great grandson, Dane Anderson, will lead the company and that same legacy will be running four generations strong. Much has changed in 87 years, but the foundation of Forney Industries remains the same. After all, Welding in America isn’t just a slogan, it’s the backbone of this company.

Product description

The Forney 75334 Industrial/Milton Style Adjustable Pocket Blow Gun is extremely handy and easy to use. Just twist the knurled nozzle to adjust from a whisper of air to full 30 PSI volume flow. Forney Industries is one of Americas longest operating family-owned metal working product companies. Founded in 1932, Forney offers more than 5, 000 products for the hardware, automotive, farm and ranch and do-it-yourself markets. for more information, visit www. forneyind. If you've got metal working questions, we've got answers. Were committed to your success regardless of location size or needs. Please contact our team at www. customerserviceatforneyind. Industrial/Milton Style Adjustable Pocket Blow Gun. OSHA regulation 100-1 compliant. Claims for must be made within 90 days of the date of purchase. Proof of purchase required. This does not cover any product that has been subject to misuse, neglect, negligence or accident, or that has been used in any way contrary to the purpose intended.

• Industrial/Milton style pocket blow gun
• Extremely handy and easy to use
• Just twist the knurled nozzle to adjust from a whisper of air to full 30 PSI volume flow
• Industrial/Milton compatible 1/4" plug, adjustable pocket blow gun. OSHA regulation 100-1 compliant.

User questions & answers

Question:	Does is close fully or will with always blow a small amount if plugged into the hose
Answer:	It does close fully.
Question:	How do I use this item
Answer:	just twist bottom half like a screw then you can control the air that comes out great for cleaning out small holes hoses ect
Question:	what other equipment is required to operate this blower
Answer:	air compressor and air hose,works really good

Product description

The Forney 75494 rubber tipped air blow gun with 1/4-Inch female inlet is a blow gun with an oil resistant soft replaceable tip. Will not mar delicate surfaces. Gives a leak proof seal against oil passages, fuel lines when air pressure is needed for cleaning. Complete with hang-up hook and female NPT inlet. Forney Industries is one of America's longest operating family-owned metal working product companies. Founded in 1932, Forney offers more than 5,000 products for the hardware, automotive, farm and ranch and do-it-yourself markets. If you've got metal working questions, we've got answers. Were committed to your success regardless of location size or needs. Rubber tipped air blow gun with 1/4-inch (6.35mm) female inlet. Not to exceed 30 PSI. Claims for warranty must be made within 90 days of the date of purchase. Proof of purchase required. This warranty does not cover any product that has been subject to misuse, neglect, negligence or accident, or that has been used in any way contrary to the purpose intended.

• Blow gun with oil resistant, soft replaceable tip
• Will not mar delicate surfaces
• Gives a leak proof seal against oil passages, fuel lines when air pressure is needed for cleaning
• Complete with hang-up hook and female NPT inlet
• For use on a regulated air line with a pressure setting not to exceed 30 PSI

Product description

The Forney 75336 lever-type blow gun with 2 foot extension and rubber tip is zinc alloy with blue zinc coating. Extension is aluminum with oxidized finish. For use on regulated compressed air lines. Forney Industries is one of America's longest operating family-owned metal working product companies. Founded in 1932, Forney offers more than 5,000 products for the hardware, automotive, farm and ranch and do-it-yourself markets. If you've got metal working questions, we've got answers. Were committed to your success regardless of location size or needs. Lever-type blow gun with 2 foot (50.8mm) extension and rubber tip. Recommended working pressure of 90 PSI. Max working pressure 150 PSI. Claims for warranty must be made within 90 days of the date of purchase. Proof of purchase required. This warranty does not cover any product that has been subject to misuse, neglect, negligence or accident, or that has been used in any way contrary to the purpose intended.

• Recommended working pressure of 90 PSI
• Max working pressure of 150 PSI
• Blow gun is zinc alloy with blue zinc coating
• 2-foot extension is aluminum with oxidized finish
• For use on regulated compressed air line

Product description

The Forney 75332 lever-type blow gun (stubby) with 1/4-inch female NPT inlet is a high quality nozzle that gives increased performance. Features vented nozzle to relieve the compressed air pressure should the nozzle become plugged or accidentally obstructed. Forney Industries is one of America's longest operating family-owned metal working product companies. Founded in 1932, Forney offers more than 5,000 products for the hardware, automotive, farm and ranch and do-it-yourself markets. If you've got metal working questions, we've got answers. Were committed to your success regardless of location size or needs. Lever-type blow Gun (stubby) with 1/4-inch (6.35mm) female NPT inlet. Inlet pressure is 150 PSI. Meets OSHA 100-1 for 30 PSI "dead head" pressure. Claims for warranty must be made within 90 days of the date of purchase. Proof of purchase required. This warranty does not cover any product that has been subject to misuse, neglect, negligence or accident, or that has been used in any way contrary to the purpose intended.

• High quality nozzle gives increased performance
• Stubby version
• Features vented nozzle to relieve the compressed air pressure should the nozzle become plugged or accidentally obstructed
• Inlet pressure is 150 PSI
• Meets OSHA 100-1 for 30 PSI "dead head" pressure

Product description

The Forney 75495 button-type air blow gun with 1/4-inch female inlet is a high quality nozzle that gives increased performance. Features vented nozzle to relieve the compressed air pressure should the nozzle become plugged or accidentally obstructed. Forney Industries is one of America's longest operating family-owned metal working product companies. Founded in 1932, Forney offers more than 5,000 products for the hardware, automotive, farm and ranch and do-it-yourself markets. If you've got metal working questions, we've got answers. Were committed to your success regardless of location size or needs. Button-type air blow gun with 1/4-inch (6.35mm) female inlet. Inlet pressure is 150 PSI. Meets OSHA 100-1 for 30 PSI "dead head" pressure. Claims for warranty must be made within 90 days of the date of purchase. Proof of purchase required. This warranty does not cover any product that has been subject to misuse, neglect, negligence or accident, or that has been used in any way contrary to the purpose intended.

• High quality nozzle gives increased performance
• Features vented nozzle to relieve the compressed air pressure should the nozzle become plugged or accidentally obstructed
• Inlet pressure is 150 PSI
• Meets OSHA 100-1 for 30 PSI "dead head" pressure

Product description

The Forney easy weld 140 fc-I machine uses flux core wire. Applications include do-it-yourself, maintenance and repair, metal fabrication and hobbyist. Product specifications: dimensions: 16. 75" X 8. 125" X 12" Weight: 19 lbs. Gasless/flux-core welding only portable torch wrap infinite voltage and wire feed speed control 120-volt input, 140 amp output welds 24-gauge up to 1/4" Handles . 030" Wire includes: 8' Mig Gun, 8' Ground clamp and 20A - 15A adapter duty cycle 30% @ 90A

• EASY TO USE-140 FC-I MIG machine uses 0.30, flux core wire. It has infinite voltage and wire feed speed control so you can dial in the perfect weld! Perfect entry level welder
• POWERFUL- Up to 140 Amp output that allows you to weld mild steel up to 1/4 in plate
• PORTABLE WELDER- Lightweight 19 lbs. easily carried to any Do-It-Yourself, Maintenance, Repair, Metal Fabrication and Hobbyist project
• RUGGED- All metal case, Built to take the day to day. Big enough to handle 2 and 10 pound rolls of wire
• WELDER INCLUDES- 8' MIG gun, 8' ground clamp, Integrated handle with torch wrap and a 20A-15A adapter. Backed by a 12-month warranty
• PRODUCT SPECIFICATIONS- Dimensions: 16.75" (425.45 millimeters) x 8.125" (206.38 millimeters) x 12" (304.8 millimeters), Weight: 19 lbs. (8.62 kilograms), Gasless/flux-core welding only, Portable, Torch wrap, Infinite voltage and wire feed speed control, 120-volt input, 140 AMP output, Welds up to 1/4 in. (6.35 millimeters), Handles .030 in. or 0.35 in. wire, Includes: 8' MIG gun, 8' ground clamp and 20A - 15A adapter, Duty Cycle 30% @ 90A
• RECOMMENDED ACCESSORIES- Contact Tips (60170, 60171 and 60172),Welding Nozzles: (85336 and 85337), Diffuser: (85339), Flux Core MIG Wire: (42300 and 42301), Anti-Spatter Spray: (37030), Nozzle Gel: (37031)
• Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!

User questions & answers

Question:	This come with the welding wire
Answer:	I'm sorry it took as long as it did for me to answer you. I have no prior knowledge of this Predator generator and I had to look that up. I also would like to preface what I'm about to say with I am not a generator expert. Also I wanted to be sure that I looked up the specific amperage draws of our different welders. The formula for calculating the answer to your question is pretty straight forward. Generators measure their output in Watts in order to determine what wattage is necessary the formula is as follows... Volts X Amps = Watts. The machine you are asking about runs 7250 continuous Watts but it does not take into account what percentage of fluctuation of output amperage this machine makes, how clean is this machine? How reliable is the output amperage? I have no idea but let's plug the numbers in assuming the machine can maintain a relatively stable output. The model 155 draws max 25.4 amps on 230V in MIG mode or, 5842 watts. It draws 26.7amps on 230V in stick mode or, 6141 watts. So for this small machine it would appear yes all else being ok. Now, for example, our 200 amp MIG draws in MIG mode 35.7 amps at 230 V or, 8211 watts. It draws 41.7 amps in stick mode at 230 V or, 9591 watts. So for our larger inverters, it would appear no, that generator cannot provide sufficient output to run the welders at full potential welding power.
Question:	What type of .30 tip? Thread pitch? Size
Answer:	So only going by the pictures this appears to be a Tweco style gun similar to what the older Lincoln’s ran. Unfortunately you will have to find out what the US pro welding gun has for a back end.
Question:	Is the wire supposed to move really slow even turned all the way up
Answer:	No, not on the 155 model. 2lb
Question:	Do you know what the power output is turned all the way down
Answer:	This question really is more a generic question than it is specific to any brand welder. If you're giving it half the power it can use. Generally, you can figure you're going to get half the result. So prepared properly and possibly a little bevel, 1/8in would be about max Remember voltage is the pressure or pushing force of the amperage or heat.

Product features

Forney Easy Weld 140 FC-i Welder

The Forney 140 welder is an impressive Flux-Core capable welder. Perfect for first time welders up to avid users. Applications include do-it-yourself projects, general metal fabrication, maintenance & repair, farm & ranch and automotive work.

Product description

The Forney 220 MP welder brings multi-process (MIG Stick TIG) welding to the next level Ideal for anything from do-it-yourself projects to light industrial work this powerful welding machine features dual-voltage with 120V/230V input power With a single pass high welding capacity of 1/2” (12 7mm) and 220 AMPs of welding power this unit is ideal for use on steel stainless steel cast iron and aluminum This machine is rugged and technologically advanced with a digital display all-metal drive system and 3-year

• POWERFUL- Welds up to 1/2" mild steel Output power for MIG welding is 120V 35% @ 90A and 230V 40% @ 200A Stick Welding is 120V 32% @ 80A and 230V 40% @ 200A TIG welding output power is 120V 35% @ 110A and 230V 40% @ 200A
• PROCESSES- GMAW (MIG) FCAW (Flux-Cored) SMAW (Stick) and GTAW- DC (TIG)
• DUAL-VOLTAGE- Forney’s 220 Multi-Process welder is equipped with dual-voltage 120V/230V input power and adapter
• IDEAL FOR- Use on steel stainless steel cast iron and aluminum. Aluminum welding is only with a spool gun on this machine
• INCLUDED- Welder includes a 12 5’ (3 81m) 200 AMP Pro-Grip MIG Gun a 15’ (4 57m) ground clamp with cable a 15’ (4 57m) electrode holder and cable 15’ (4 57m) input power cable flow gauge with hose and extra contact tips
• ACCESSORIES- Welder includes a 200 AMP Pro-Grip MIG Gun, a ground clamp with Cable, an Electrode holder and cable, input power cable, and lastly a flow gauge with a Hose!
• Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!

User questions & answers

Question:	Which spool gun will work on the 220 mp
Answer:	$42 does not sound like a likely price. You should look for another offer or buy some at your local hardware store or Harbor Freight. Make sure you have the right one (.030 0r .035 or ?).
Question:	What type of adapter needed to convert 120v plug side to standard wall plug
Answer:	The thread size on these tips are M6 x 1.0
Question:	Can you use the same gas for mig as you would for tig
Answer:	Yes, they will. I don't know of a machine that won't use the tweeco style of tip in a mig welder.
Question:	Hello Dimensions seem wrong. Is welder really 17.3 or 20 inches wide
Answer:	Hello! Because these contact tips are Tweco compatible, they will work with the Lincoln Magnum 100. Thank you for your question!

Product features

Forney 220 Multi-Process (MP) Welder

The Forney 220 MP welder brings multi-process welding to the next level. Ideal for anything from do-it-yourself projects to light industrial work, this powerful welding machine features dual-voltage with 120V/230V input power. With a high welding capacity of 1/2” and 220 AMPs of welding power, this unit is ideal for use on steel, stainless steel, cast iron and aluminum. This machine is rugged and technologically advanced with a digital display, all-metal drive system.

Included Accessories and Consumables:

• 12.5’ (3.81m) 200 AMP PRO-Grip MIG Gun
• 15’ (4.57m) Ground Clamp with Cable
• 15’ (4.57m) Electrode Holder with Cable
• 15’ (4.57m) Input Power Cable
• Flowgauge with Hose and Extra Contact Tips

Recommended Accessories and Consumables:

• ITEM# 84095 - PRO Grip MIG Gun, 12', 200 AMP with Euro (Replacement Gun)
• ITEM# 85658 - 150 AMP 17FV TIG Torch 12.5'
• ITEM# 85655 - TIG Foot Pedal, 25' (7.6M) 7 Pin
• ITEM# 85660 - 150 AMP 17F Amptrol TIG Torch 12.5'

GMAW (MIG) Welding

Output Power:

• 120V: 35% @ 90A
• 230V: 40% @ 200A

Input Power:

• 120V @ 21.4A
• 230V @ 38A

GTAW-DC (TIG) Welding

Output Power:

• 120V: 35% @ 110A
• 230V: 40% @ 200A

Input Power:

• 120V @ 21.4A
• 230V @ 38A

SMAW (Stick) Welding

Output Power:

• 120V: 32% @ 80A
• 230V: 40% @ 200A

Input Power:

• 120V @ 21.4A
• 230V @ 38A

The Developed. Tested. Trusted. Promise

Developed - Our engineers examine every detail to develop products that are intuitive, reliable and function as expected. This machine encompasses several innovative features such as an integrated rubber mat for tool storage, legs that double as a torch hanger, easy-to-operate controls, and longer power cables and torches for a larger working area. While these features are important, we’ve also designed and engineered these machines with exceptional arc characteristics that ensure an extraordinary welding and cutting performance.

Tested – The printed circuit board and its assembly are all done in P.R.C., but our technicians assemble the machine with parts consisting of sheet metal, aluminum die cast parts, aluminum extrusion handles, and knobs that are manufactured in the U.S.A. We believe it is imperative to keep as many jobs in the U.S.A. as possible while providing exceptional value to our customers. Our technicians thoroughly test and document every machine for safety, reliability and functionality before neatly packaging and verifying the contents.

Trusted – When you buy a Forney machine, you have a direct line to technicians and engineers that operate our “Expert-Tech” service line. If you have product or application questions, you can call 1-800-521-6038 and speak to a product expert. If we can’t solve your problem over the phone, you can use one of our Service Center partners or let us take care of the shipping fee and send it back to Fort Collins, CO to get your machine fixed quickly. We turn 99% of machine repairs around in 24 hours to get you back up and running. Experience the Expert-Tech difference.

Product description

The Forney 42300 E711-GS Flux Core MIG Wire for mild steel is a self shielded mild steel all position flux cored MIG welding wire. Best suited to single pass applications with high travel speed. Moderate to low spatter. Although no gas is required, an Argon/CO2 mix will reduce spatter. Excellent on thin gauge mild steel. Pink color coding on label. Forney Industries is one of America's longest operating family-owned metal working product companies. Founded in 1932, Forney offers more than 5,000 products for the hardware, automotive, farm and ranch and do-it-yourself markets. If you've got metal working questions, we've got answers. We're committed to your success regardless of location size or needs. Tensile Strength is 79,000 PSI. Polarity is DCEN Straight. Shielding Gas is not required. Wire Diameter is .030-Inch (.8mm). Weight is 2-Pound (.907 Kg). Flux cored wire is classified as ER71T-GS. (E) Stands for Electrode. The indicates the tensile strength, 70,000 PSI. The indicates that it is an all position wire. (T) Indicates tubular wire. (G) Is for general, meaning no other specifications apply and (S) means single pass only. Claims for warranty must be made within 90 days of the date of purchase. Proof of purchase required. This warranty does not cover any product that has been subject to misuse, neglect, negligence or accident, or that has been used in any way contrary to the purpose intended.

• All position flux core MIG wire for mild steel that is a self Shielded and works well on rusty, dirty and painted Material
• Best suited to single pass applications with high travel speed, runs hotter than solid wires
• Excellent for outdoor windy conditions
• Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!

User questions & answers

Question:	What is the diameter of the center hole
Answer:	Yes this is the exact size of the radio shack iron. Now when you say mini I’m thinking there was a larger one? But I’m very familiar with the radio shack iron and this is it. It comes with the pointed fitting I had to buy the other piece separately. Glad I could answer your question. Any others let me know. ✌🏼
Question:	can I use this to solder
Answer:	Theoretically you can hold it just inder the tip but why would you id say the best place to hild it us just under the on off valve and that is about 2.5 inches from the tip. The inly thing to worry about is when lighting it especially if you are using any tip besides the soldering tiplike the torch tip. But other than that make sure you turn it off before you p i t it down and dont touch the tip obviosly for a few minutes
Question:	can I use this with my 125 amp flux core welder from harbor freight
Answer:	As an aircraft mechanic, I use this product all over the airplane (can't remove the tanks) just a bit of common sense, don't solder if fuel is leaking, and don't solder on the tank, hope this helps.
Question:	Will this work with a cheap 90 amp harbor freight
Answer:	No

Product features

Forney 42300 Flux Core Mig Wire, Mild Steel E71TGS.030-Diameter, 2-Pound Spool

This E71T Flux-Core MIG (GMAW) welding wire for mild steel is ideal for all-position welding, and best suited for single pass applications with high travel speed.

Pink color coding on label.

No shielding gas required.

Product Specifications:

• No shielding gas required
• Recommended polarity: DCEN straight
• Diameter: .030" (.762 millimeters)
• Weight: 2 lbs. (.907 kg)
• Tensile strength: 79,000 PSI

Product Features:

SELF-SHIELDED

• This all-position Flux-Core MIG wire is self-shielded, making it ideal for work on rusty, dirty and painted material.

MODERATE TO LOW SPATTER

• This wire produces moderate to low spatter. Using an Argon/CO2 mix will reduce spatter.

RUNS HOTTER

• Forney's E71T wire runs hotter than solid wires. This makes it best suited for single pass applications with high travel speed.

EXCELLENT FOR OUTDOOR USE

• Because this wire does not require shielding gas, it is ideal for outdoor welding. Wires that do require gas run the risk of wind blowing the gas away, ultimately resulting in porosity.