9 best rc soldering iron

Product description

Reliable digital technology by HAKKO – Introducing the HAKKO FX-888D Excellent thermal recovery Heater output has been increased by 30% compared to that of the conventional models HAKKO 936·937. Also FX-888D delivers excellent thermal recovery by using T18 series tips for their terrific heat conductivity. This allows soldering at a lower set temperature and reducing the thermal impact on components as well as tip oxidation that can shorten tip life. Thermal recovery graph Rise time to 350Degree C is 20 seconds faster and tip temperature drop is reduced during continuous work. HAKKO FX-888D performance comparison graph with conventional stations Able to shorten the time required for the same work and improve work efficiency significantly. Designed to be User-Friendly Small footprint Compact station body requires a space of only 100 (W) x 120 (D) mm. What’s more, points that come into contact with the floor are positioned as close to the outer edge of the body as possible to improve stability and make the station difficult to fall over. Simple and easy operation With only two operation buttons of UP and ENTER in the center, operation is simple and easy. Even if you’re not familiar with operation of machines, you can operate it without difficulty. Iron holder with full of functions An iron holder of the same color of a soldering station comes as a set. The highly functional iron holder not only improves ease of use, but also brings a sense of visual consistency to the work environment. Silver Soldering station Iron holder Blue & yellow Soldering station Iron holder Strict temperature management Digital display The FX-888D’s digital display makes it easy to check the set temperature at a glance.

• Digital soldering station end safe version with 5 extra tips -t18-d08/D12/D24/D32/S3 tips
• FX-888D KIT version with 5 extra tips -T18-D08/D12/D24/D32/S3 tips ( 6 total with the iron )
• Adjustable temperature control
• Temperature range 120° - 899° f (50° - 480° c)
• Digital display shows °ree; f or °ree; c

User questions & answers

Question:	Is this unit esd safe? does it have a three prong plug
Answer:	To cover... Yes... as a liner ...No
Question:	Do you provide it with Euro power plug
Answer:	Yes. Its not tightly woven
Question:	How well would this work for soldering stained glass
Answer:	You can scroll down snd get the size you want. It is lightweight, so it will blow away with a big wind. We got 8 x 10 for a sitting tarp when it’s wet outside.
Question:	What does the 23BY in the advertised model number FX888D-23BY mean. Hakko site does not recognize this item number
Answer:	Yes. You will have to bring it up some or it is total darkness. The only place you will see light is where there is no tarp.

Product description

Technical parameters:

Product Name : CNC versatile insulated aluminum welding station ( red )

Manufacturers ID : FC731-002

Material : CNC Aluminum + insulation

Support Plug Type : T head XT60 XT90 miniT head 2-10mm banana head 12 specifications )

Product Dimensions : 110 * 60 * 15mm

Product Weight : 145.3g (including the screw)

Packing List:

1 x Soldering jig

• Multi-function Heat Insulation Welding Plate For XT60 XT90 T Banana Plug .
• The use of CNC engraving technology produced, the weight of only 147 grams
• Support the market most of the HM plug welding.
• Product Dimensions : 110 * 60 * 15mm.
• Compatible with :XT60 Male & Female / T Connector / XT90 Male & Female / Mini-T, 2.0, 3.5 and 4.0mm Banana Plug; For bullet connectors you are offered the following sizes: 10.4mm, 8.3mm, 7.8mm, 6.9mm, 5.8mm, 5.3mm, 5.0mm, 4.6mm, 4.3mm, 3.2mm, 2.7mm, 2.4mm

Product description

Reliable digital technology by HAKKO – Introducing the HAKKO FX-888D Excellent thermal recovery Heater output has been increased by 30% compared to that of the conventional models HAKKO 936·937. Also FX-888D delivers excellent thermal recovery by using T18 series tips for their terrific heat conductivity. This allows soldering at a lower set temperature and reducing the thermal impact on components as well as tip oxidation that can shorten tip life. Thermal recovery graph Rise time to 350Degree C is 20 seconds faster and tip temperature drop is reduced during continuous work.

User questions & answers

Question:	In what country is Hakko FX888D-23BY manufactured
Answer:	Thanks for your contact. Yes, this stud finder sensor can be used on the plaster wall. If you have any other questions, please feel free to contact us: [email protected]
Question:	Since the chinese have flooded the market with fake hakko soldering stations, how can we tell if this is a fake or not
Answer:	Thanks for your question. Yes, this stud finder wall scanner can be used on your ceilings. If you have any other questions, please feel free to contact us: [email protected]
Question:	Can I use this to smolder dry herb in a bong
Answer:	unfortunately it is made in China. I have only used it once but seemed to work good.
Question:	Real or fake? i've heard many of the hakko fx888ds sold through amazon are knock offs. anyone buy from ness electronics
Answer:	I can only tell you that it worked through dry wall and It did recognize the wood studs around a door. And it worked exactly as described. I suspect that it will work through plaster, but I have no plaster in my house. I looked for the studs around the door to make sure that it worked.

Product description

"

Features:



Compatibile with:RC Cars Airplanes Helicopters Boats Robot,etc.

Features:

Material:Aluminum (sturdy and durable, dissipates heat quickly)

It has pre made holes to support 18 different sizes,list of the holes as follows:

XT60 Male

XT60 Female

T Connector

XT90 Male

XT90 Female

Mini-T;

For bullet connectors you are offered the following sizes: 10.4mm, 8.3mm, 7.8mm, 6.9mm, 5.8mm, 5.3mm, 5.0mm, 4.6mm, 4.3mm, 3.2mm, 2.7mm, 2.4mm

Size:60x110x15mm (LxWxH) small enough to take with you when you go to the flying field

Thermal Insulating Layer: Black thermal insulating layer surrounded by the holes, which can effectively prevent heat propagation.

Packing List:

1 x Soldering jig -Blue"

• Compatibile with:RC Cars Airplanes Helicopters Boats Robot,etc.
• Material:Aluminum (sturdy and durable, dissipates heat quickly)
• It has pre made holes to support 18 different sizes,list of the holes as follows: XT60 Male, XT60 Female, T Connector, XT90 Male, XT90 Female, Mini-T;
• For bullet connectors you are offered the following sizes: 10.4mm, 8.3mm, 7.8mm, 6.9mm, 5.8mm, 5.3mm, 5.0mm, 4.6mm, 4.3mm, 3.2mm, 2.7mm, 2.4mm
• Size:60x110x15mm (LxWxH) small enough to take with you when you go to the flying field

• ★POCKET SIZED and SAFE★Not like the traditional electric soldering station, this original TS100 mini digital soldering iron has a smaller size the same as a pen with 304 stainless steel nested polycarbonate housing and ESD safety circuit, lightweight for portable carry easily and safe to use
• ★FAST HEATING SPEED★Adopts internal heating mode with ceramic effective heating element to reach the set temperature in about 10s,save your working time
• ★SMART★ Built-in SMT32 MCU,dual temperature sensor and acceleration sensor with application layer open source design, you can change the various default parameter settings such as standby time/temperature,operating temperature,temperature unit(C/F) even the boot screen logo
• ★EASY OPERATION★ OLED screen readout the parameters and two momentary push button to control and set the parameters,100-400℃ adjustable temperature range, Support auto sleep mode witout operation in 3 minutes to save the energy ideal for circuit board and fields repair
• ★PRACTICAL and SAFE★ Comes with 24V 3A DC power supply with 1.2 meter long soft silicone rubber power cord,mini soldering stand,1.5m long ESD ground clip wire and XT60 bullet power cable enable you to power the solder directly no more parts needed

User questions & answers

Question:	The description says this comes with power supply, but some people report it does not. It's included
Answer:	No the only time the head locks is in the down position.
Question:	What are the different tip styles and what they are used for
Answer:	It have the orginal flat balde, whisk. Yet not cover, and not flex edge beater, my brother once bought a GVODE flex edge beater, which work fine on this 5quart mixer.
Question:	Is this the original TS100 or a clone/copy? Sorry for ask but the advertisement is not clear after seen other publications
Answer:	The material is stainless steel. I've used mine daily for about half of a year with no rust.
Question:	What is the power output from the power supply? What’s the maximum temperature with the power supply
Answer:	Yes, mine has measurements in both oz and ml.The minimum measurement indicator is 4 oz, followed by 6 , 8, 10 and 12.

Product features

Smart STM32 Chip Control

• Built-in SMT32 MCU,dual temperature sensor and acceleration sensor with application layer open source design
• Support temperatur automatic calibration,sleep mode,low voltage protection and over temperature protection

OLED Screen Display

• 0.69" OLED screen display the paremater and push button to set parameter easy to operation

DC5.5*2.5 Power Jack

• DC12V-24 low working voltage with DC5.5*2.5 power port can be powered by laptop power supply,drone lithium-ion battery directly safe to use

Compatct Pen Shape Size

• 6.61 inch long in total the same size as a pen much smaller than the traditional electric soldering station

24V 3A US Power Supply

• Equipped with NovelLife customized high quality DC 24V 3A 72W output US power supply ensure 65W full power output and fast heating speed which reach the set temperature only in 10 seconds.
• 1.2 meter soft silicone rubber power cord enable you to power the TS100 soldering iron easily

ESD Ground Wire for ESD Protection

• Equipped with 1.5 meter long soft ground clip wire kit ensure ESD protection to avoid the electronics elements from static electricity damge

XT60 to DC5525 Rubber Power Cable

• Equiped with 50cm long silicone rubber XT60 male to DC5.5*25 power cable enable you to use the drone lipo battery (3S or above battery) to power the ts100 directly perfect for field repairs(the lipo battery is not included in the package)

Firmware Updating Instructions:

1. Visit the official web and download the ts100 firmware
2. Press button A(which close to the soldering tip side one) then connect the TS100 soldering iron to your computer via micro USB cable to enter DFU mode once a “DFU1.0” notice appears on the screen. A virtual disk with 8 serial numbers will appear on your PC.
3. Copy the hex firmware to the root directory of that disk. When the extension of the firmware changes from “hex” to “rdy”, disconnect USB and the firmware is upgraded.

• The X-Tronic Model 3020 Digital 75 Watt Soldering Station is a Powerful “Quick Temp” Unit and is manufactured for the Beginner as well as Expert Users and will Definitely Exceed Your Expectations with its Quality & Durability compared to any Soldering Iron Station in its Class. This Unit takes less than 30 Seconds to heat up from 200°C to 480°C (392°F to 896°F)
• The Complete Kit Includes: 75-Watt Soldering Station (60 Watts used for Soldering Iron &15 Watts used for Mini Mother Board in Soldering Iron) with 2 Helping Hands for Propping Up Smaller PCB’s right in front of the unit for you to work on, 5 Extra Sizes/Styles of Soldering Tips along with Side Mount Solder Roll Holder, Spring Style Soldering Iron Holder & a Brass Sponge Tip Cleaner with Supply of Cleaning Flux in the Tin plus a Wet Sponge.
• Features: ESD Safe, 10 Minute Sleep Timer, Centigrade to Fahrenheit Toggle Switch, Blue LED Readout on Control Panel, PSD (Proportional-Integral-Derivative) Technology often referred to as Magic Temperature Compensation Technology, 40 Inch Very Pliable Soldering Iron Cord (Virtually No Memory) and a 55 Inch Power Cord from Wall Plug to Main Unit.
• PLEASE NOTE: The Main (First) Photo shows the Brass Sponge Tip Cleaner with the Flux In the Round Metal Tin Separately from the Soldering Station and also shows this same Container Mounted In the Main Unit - This is FOR PHOTO PURPOSES ONLY. There is "ONLY ONE" of these Containers that come with this Soldering Station.
• ALL X-Tronic Products come with a 30-Day Unconditional Money Back Guaranty which also includes a 3-Year Warranty with the Cost of Parts and Labor Included. PLEASE SCROLL DOWN THIS PAGE FOR MANY MORE PHOTOS & INFORMATION ON THIS PRODUCT!

User questions & answers

Question:	is this unit esd compliant? will it pass esd testing.? in other words can i safely use this on esd sensitive equipment
Answer:	The simple answer is yes, but as a person who has done stained glass and electronics, this is not the right one for doing hobby work. Go on some hobby sites and see what folks use for stained glass projects. Weller is nice stuff. Look for this one: Weller WLC200 80 Watt Hobby and Stained Glass Soldering Station. It's cheaper than this one. If you're looking for an electronic repair soldering iron with super precise temp control and you just need to fix a single stained glass lamp...this is a nice compromise.
Question:	Does the unit come with a soldering tips
Answer:	Actually no it’s on the neutral. The plug is keyed and I was checking the unit out and found that out... strange
Question:	I don't want to assume this is made in the usa because the title "x-tronicsusa. is this "made in usa
Answer:	The station is available in 120V and 230 Volt versions. This one sold on amazon.com is 120V
Question:	What tips do these use? Can you use weller tips and if so what series
Answer:	It is unclear, however we need to qualify the negative responses. This quest results from a EEVBlog post in which the "expert" electronics blogger plugged his north american device(110v-60hz) unit "accidentally" into an australian(he is in australia) 230v-50hz outlet. In north america the outlet between 110v and 220v,240v are utterly different and cannot inadvertantly be plugged in. If there is an over current situation your breaker panel will pop.

Product features

X-Tronic's 3020-XTS • Digital LED Display • 75 W Soldering Iron Station

The Complete Kit is Manufactured by X-Tronic for the Beginners as well as the Experts and Will Exceed your Expectations of Quality and Durability for any Soldering Station in this Category.

Included with this Kit: 75-Watt Soldering Station (60 Watts for Soldering Iron &15 Watts for Mini Mother Board in Soldering Iron), Side Mount Solder Roll Holder, Brass Sponge Tip Cleaner with a Good Supply of Cleaning Flux, Wet Sponge, 5 Extra Soldering Tips & 2 Helping Hands (these are Detachable).

Features: ESD Safe, Anti-Static Designed, 10 Minute Sleep Timer, Centigrade to Fahrenheit Toggle Switch, "Bright" Blue LED Readout on Temperature Display, PID (Proportional-Integral-Derivative) Heating Technology often referred to as Magic Temperature Compensation Technology, 40 Inch Very Pliable Soldering Iron Cord (Virtually NO Memory) and a 55 Inch Power Cord from Wall Plug to Main Unit.

All Set Up and Ready For Use

The X-Tronic 3020-XTS has a Temperature Range of 200°C to 480°C (392°F to 896°F).

You can Change the Readout from Celsius to Fahrenheit with a "Flip of the Switch".

The above photo also shows the 2 Helping Hands holding a PCB to work on.

This Soldering Iron Station has a Temperature Range of 392°F ~ 896°F/200°C ~ 480°C

This unit Features a Bright Blue LED Fully Adjustable Temperature Display and C/F Toggle Switch..

You can easily change the LED digital temperature readout from "Centigrade to Fahrenheit" for the Soldering Iron Temperature with a flip of the switch

Chromed Spring Steel Soldering Iron Holder

The Soldering Iron Holder is manufactured from Chromed Spring Steel..

It has a "Bakelite" Polymer Collar Ring to Stop Heat Transfer

You will Really Appreciate how easily you can "Holster" you Soldering Iron in this.

60 Watt Soldering Iron with Ergonomic Heat Resistant Silicone Grip

The Soldering Iron that comes with this Unit boasts a Stainless Steel Shank with an "Ergonomic Heat Resistant Silicone Grip" that is Very Comfortable to use.

The Soldering Iron Features a "Quick Temp" Heating Element that will heat up to the Top Temperature in less than 30 Seconds.

5 Extra Assorted Sizes/Styles of Soldering Tips

The X-Tronic XTS-4010-2 comes with 1 - TI Soldering Tip already mounted in the Soldering Iron and 5 Extra Sizes/Styles as shown above. The 5 Extras are the Following Sizes/Styles:

• 1 Each - T-I
• 1 Each -T-B
• 1 Each -T-3C
• 1 Each -T-2.4D
• 1 Each - T-K

2 - Helping Hands (Detachable)

The 2 Helping Hands that come with this unit are 10" Long.

They can be Easily be Attached or Detached from the Main Unit by Screwing or Unscrewing them from the Main Unit.

You will find them Very Helpful on Small PCB's that you can PropUp to work on right in front of you.

Soldering Iron Tip Cleaner - Soft Coiled Brass Wire Sponge Holder with a Supply of Rosin Flux for Cleaning

Soft coiled brass wire thoroughly cleans the residue on the tip, extending the service life of the tip.

Reduces the rate of oxide accumulation in the tips, Prevents the risk of contamination and Avoids premature wear of soldering iron tips

• 【PERFECT 12-In-1 SOLDERING KIT】Upgraded TOAUTO 80 Watt Soldering Station with 5 x Additional Soldering Tip,1x Bracket for solder On The Side,1x Roll of Lead-free Solder Wire(50g),1x Solder Sucker,1x Anti-static Tweezers,1x Brass Tip Cleaner,1x Instruction Manual.
• 【FAST HEATING & STABLE TEMPERATURE】 Soldering Station uses High power (80W) electric iron heating core, a soldering temperature of 392 °F is reached after about 6seconds. Internal ceramic heating element strong welding, fast temperature rise, fast temperature compensation.High-temperature resistant silicone wire, Anti-static design & ESD safe, temperature Range: 194°F ~ 896°F/90°C ~ 480°C
• 【PRECISE TEMPERATURE CONTROL】Enjoy convenient button control and hassle-free operation.LED display, PID Temperature Control Technology-It can detect the actual temperature of the soldering iron's heating element, quickly correct it with a rapid return to the correct set temperature. In Temperature Locking mode, it can ensure constant temperature work.
• 【ADVANCED TECHNOLOGY】C/F Function easily changes the LED digital readouts from "Centigrade to Fahrenheit" for the Soldering Iron Temperature with a flip of the switch.Auto Standby & Auto Sleep and Warning Notice can effectively extend the service life of the soldering iron，and protecting you and your kids and pets from getting hurt.
• 【UPGRADED VERSION - IDEAL CHOICE】Upgraded to Blue Version FT-80W for orders after July.6. Perfect for beginners and experts repairing workwear, FT-80W is CE, FCC, RoHS certified safety in use, can be used for PCB / SMD / SMT welding, DIY hobbies, home appliance repair, factory production.TOAUTO will be provided for 1-year warranty after-sales and lifetime technical support, and 30-day return.

Product features

Why choose our TOAUTO FT-80W Digital Soldering Iron Station Kit ？

• TOAUTO FT-80W Soldering Station is a low cost, high-quality ESD safety 80 watts anti-static soldering station.
• It only requires a minimum working space for multiple functions, which will meet users' different requirements.
• The quality and durability of this kit will exceed your expectations compared to other soldering stations of its kind.
• Note: Upgraded to Blue Version FT-80W for orders after July.6.

PID Temperature Compensation

Technology which the program will cycle every 20 milliseconds to detect the actual temperature of the soldering iron's heating element, quickly correct it with a rapid return to the correct set temperature

C/°F Conversion

Centigrade/Fahrenheit display conversion function adapts it to user custom, which means the model can be set to display temp. in Fahrenheit or Celsius scale. You can adjust the menu button to switch them.

Temperature Locking

In Temperature Locking mode, it can ensure constant temperature work, lock in the perfect temperature for soldering. Saves the trouble of accidently pressing buttons so that you can focus on soldering.

Rapid Heating

Using High power (80W) electric iron heating core, a soldering temperature of 572 °F is reached after about 6 seconds — Gets the job done quicker with more efficiency and precision. 176°F ~ 896°F variable temperature can meet different working requirements.

Auto Standby & Auto Sleep

Intelligent 10 minutes standby & 20 minutes sleep mode can effectively extend the service life of the soldering iron, and protecting you and your kids and pets from getting hurt

Bright LED Display

A Bright Red LED Tube Temperature Display Function is standard with this TOAUTO FT-80W Unit. You can see the temperature of your soldering iron handle in real-time and clearly. It’s just good for new players to skilled experts!

Safety Soldering Iron

The heat-resistant and soft rubbery handle is non-slip in the hand and effectively isolates the heat while maintaining the highest temperature (100% Silicone Cord with Virtually NO Memory！）

COMPLETE SOLDERING KIT INCLUDED

Product description

Feature:



PID Constant temperature adjustable - can adjust the temperature according to your needs. PID temperature control technology maintains a stable temperature when working. Making firm welding for you.



°C/°F Conversion Function - LCD display temperature, ℃/℉ conversion, temperature adjustable range: 200-480℃/392~896℉.



Rapid heating - Using High power electric iron heating core, a soldering temperature of 572 °F is reached after about 6 seconds — Gets the job done quicker with more efficiency and precision. 392°F ~ 896°F variable temperature can meet different working requirements.



Auto Sleep - Auto Sleep After you stop using machine for 10 minutes, it automatically turns into sleep status, as well as stops heating. Manual Sleep When you press the knob, machine manually turns into sleep status, as well as stops heating.



Extra tips: 900M series soldering iron tip, fast heating, durable,easy to replace.



Specification:



Working Temperature: 200~480℃/392~896℉



Power: 130Watts (130 Watts max/60 Watts for Soldering Iron Heater)



Soldering Iron Tip:900M Series



Storage Temperature: 0°C to 40°C (32°F to104°F)



Type of Power Cord: Power Cord: USA Type B – 3 Pin Grounded Plug



Rated Voltage: AC 110V/60 Hz 

• Temperature Adjustable: The temperature is between 392°F~896°F/200°C~480°C celsius, adjustable temperature. Quick heating in a short time, PID temperature control，allow you to adjust rapidly or maintain an accurate.
• Soldering Iron Station kit: The soldering iron kit include soldering wire, desoldering pump, soldering iron tip, soldering iron tip cleaner, tweezers, screwdrive, to meet all your different working needs.
• Digital LCD Screen & Sleep Mode: Clear Digital Display &℉/℃ Conversion Function & Sleep Mode. LED digital display and knob allows fine control of temperature when you use it. Easily to switch between Fahrenheit and Celsius, When not used for 10 minutes, the iron will automatically enter standby mode to protect the soldering iron and save energy.
• Soldering Iron: The soldering iron using an internal thermal ceramic heating element, high efficiency, and long service life.
• Widely Used: Designed for both beginners and experts, beginners use it to do a better try while experts can update their equipment and do a more perfect working. Applications for SMD/ DIP/ SOIC welding, DIY hobbies, home appliance repair, factory production. We provide 30 Day Money Back & 2-year Warranty, friendly, and easy-to-reach support, also If any questions, please don't hesitate to contact us.

• Soldering Iron Support Station: Standard dual spring soldering iron holder with sponge is a very useful tool when the soldering iron work.It has a secure base and it is more safer than any other thin soldering stand.The maximum extent to avoid the user was burned and damaged.
• Soldering Iron Unique Features: Superior professional soldering iron has 5 multiple tips replacement, Heat and impact resistant design of screw thread so the iron head is not easy to drop.Adjustable Temperature from 200℃-450℃.Heat up fast and work great.
• Solder Sucker Desoldering Pump: Rugged metal construction,the desoldering pump is high pressure vacuum tube with aluminum body frame, which allows easy one-handed use, best for removing solder from PCB through hole solder joints.
• Widely Used & Carry Portable: Soldering iron tools widely used for welding circuit board, appliance repair, Home DIY hobbyists,jewelry welding.You can take it anywhere and you will be able to find the tools you need in the carry bag.
• 14-In-1 Soldering Kit: Soldering iron kit comes with soldering iron,desoldering pump, 5 multiple soldering tips, tin wire tube, soldering iron stand, tweezers, wire stripper cutter, 2 electronic wire.

User questions & answers

Question:	is the solder lead free and does it have rosin core
Answer:	R tank is max. OD=5.25", h=18", weight=13.26 lbs. - MC tank is max. OD=4", h=15", weight=8 lbs. (All empty tanks).
Question:	Can this be used for jewlery making
Answer:	Isn't everything made in China? Honestly I do not know, attempted boycotting China goods but have given up, "kinda" like the weeds.
Question:	What is the lowest temperature setting
Answer:	10 cubic feet in acetylene
Question:	Who made the product pictures? They are hilarious and even the stock photos are photoshopped
Answer:	El embalaje tambien incluye cilindros de oxígeno y acetileno (se envían vacíos)