12 best soldering iron stand

• Package includes 1 x Soldering iron stand,1 x Cleaning sponge,1 x 3M double paste,1 x Rosin,1 x Spare solder sponge
• HANDSKIT solder iron holder,composed of a plastic base and a metal stand which made of sturdy and heavy duty metal
• Soldering iron tip cleaner cleans tips without messy wet sponges and lengthens tips life by reducing oxidation
• Dual coiled springs of soldering stand holder to protect yourself from burning and protect the solder irons
• Portable solder cleaner stand,easy to carry and great for soldering,wood burning,solder iron hobbyists,electricians and users who works with solder
• Our purpose:satisfaction guaranteed and lifetime replacement warranty.Any questions,please don't hesitate to contact us,We will get back to you within 24 hours and provide you a satisfied solutions

User questions & answers

Question:	What are inside dimensions of the upper (black) part, and the lower (spring) section
Answer:	Pretty sure - 80 watts. Oh, sorry on the voltage. 110.

Product features

HANDSKIT Welding Solder Iron Stand Holder

Why choose us

1. Soldering iron stand fixtures into one compact all-in-one design,easy to use.
2. Sturdy and heavy duty metal soldering iron stand,high quality and can use for a long time.
3. Double paste to prevent stand from moving,you can attentively weld or solder.
4. Accepting soldering irons with diameter up to 24mm,widely application.
5. Cleans better than conventional sponges.No water required.Keep the temperature of tips and protect soldering iron tips.

Package includes:

1 x Soldering Iron Stand

1 x Cleaning sponge

1 x 3M double paste

1 x Rosin

1 x Spare soldering iron tip cleaner

Product description

Can be used for parties,Halloween,costume party.

• Brand New Product

Product description

Features: Standard issue Soldering Iron Holder for Pencil style soldering irons. Dual coiled springs to protect users and work from burns and damage. This soldering iron stand promotes safety by providing a heat resistant, stable fixture for resting a powered soldering iron. Solder tip cleaning wire help to remove oxides and excess solder to preserve tip life and enable clean, precise soldering. Package including: 1 X Soldering Iron Holder; 1 X Cleaning sponge; 1X Ball Shell Holder and Solder Tip Cleaning Wire

• Solder iron holder,composed of a plastic base and a metal stand which made of sturdy and heavy duty metal
• Dual coiled springs of soldering stand holder to protect yourself from burning and protect the solder irons
• Multi-Purpose Soldering Iton Support Stand,Detachable Soldering Iron Holder,Portable And Lightweight
• Great for hobbyists, electricians and users who work with solder or small details
• Package including: 1 X Soldering Iron Holder; 1 X Cleaning sponge; 1X Ball Shell Holder and Solder Tip Cleaning Wire set

Product description

High Quality Material: The stand is made of china, and the holder is made of metal



Ultra Mini Size: Dimension is 1.58'' L X 1.38'' W X 0.34'' H , the weight including the package box is only 40g (1.4oz), very portable to take outside and save place on your working desk



Sponge Cleaner: Very convenient for cleaning the soldering iron tips



Pefectly fit TS100 Series Mini Soldering Iron and most other soldering irons



Package Content : 1 x Holder，1XSponge.

The Package Box Dimension: 1.97X1.97X0.7 inch



NOTE: Soldering Iron in the photos are for example, NOT included in this selling item

• High Quality Material: The stand is made of china, and the holder is made of metal
• Ultra Mini Size: Dimension is 1.58'' L X 1.38'' W X 0.34'' H , the weight including the package box is only 40g (1.4oz), very portable to take outside and save place on your working desk
• Sponge Cleaner: Very convenient for cleaning the soldering iron tips
• Pefectly fit TS100 Series Mini Soldering Iron and most other soldering irons
• Package Content : 1 x Holder，1XSponge. The Package Box Dimension: 1.97X1.97X0.78 inch

Product description

Standard issue Soldering Iron Holder for Pencil style soldering irons. Dual coiled springs to protect users and work from burns and damage. Sponge for tip cleaning. Metal base for stability and durability. For 30 years Elenco has been using their strong engineering and design skills to develop reliable, affordable electronic test equipment, tools, and educational kits

• Standard issue Soldering Iron Holder for Pencil style soldering irons
• Dual coiled springs to protect users and work from burns and damage
• Sponge for tip cleaning
• Metal base for stability and durability
• For 30 years Elenco has been developing reliable & affordable electronic test equipment, tools, and educational kits

User questions & answers

Question:	What is the sponge used for
Answer:	You are to dampen the sponge and use it to clean excess solder off the hot iron tip.
Question:	Will this hold irons that use t12 tips like ksger t
Answer:	The KSGER t12 handle is too small for this holder. This holds a standard 60w soldering iron with a larger center section.
Question:	is it normal for the tip to touch the spring and the plastic holder gets hot
Answer:	I have a Weller 40 watt soldering iron and it's tip touches the spring because of the weight of the cord pulling down on iron.My soldering iron gets very hot and even if I can get the power cord to not pull down on the iron and not touch the spring,the plastic holder that holds the collar on the iron still get's very hot.I also have a Weller 25 watt iron that fit's the soldering iron holder very well which doesn't heat up the plastic collar on the holder as much as the 40 watt one does.I try to unplug the 40 watt one as soon as it's not needed no more to try and save the tip because it get's very hot as well as the holder that holds the iron.I like this holder,does what it's suppose to do,might add some pieces of metal to it to add some weight to it to help it stay in place better because sometimes I have to use my other hand to hold the stand to remove my soldering iron.
Question:	Will A 100 watt Soldering Iron work in this stand My Iron Has 1 1/8th inch Tip need to know if my tip will fit
Answer:	It should. It supports this one with no problem:http://www.amazon.com/Weller-80-Watt-Soldering-Iron/dp/B00018AR3Q

Product description

HAKKO FH300-01/P new design features a weighted stable base. This listing contains the standard cleaning sponge AND the Hakko 599B tip cleaner.

• New design
• Weighted stable base
• Standard cleaning sponge
• Hakko 599B tip cleaner also included

User questions & answers

Question:	diameter of hole? trying to find one for my pace sensatemp system
Answer:	Tip included is 3/16.
Question:	I have the fx-600 iron. will this stand work well with it
Answer:	Good morning,The Hakko FX0601-02 tip is the T19 series, 900M will not fit.There are 10 possible replacement tip variations available, T19 tip series, at $12.57 each.Concorde
Question:	Will this work for the Hakko Mach 1 model 918 soldering iron
Answer:	The proper temperature actually depends on the alloy solder you are using.Standard stained glass solders melt at about 361 degrees F. The iron needs to hot enough to hold sufficient heat to drag the solder along the foil. 600-650 would be the minimum temp. to use depending on the size of the surface being soldered.
Question:	Will this work with the Hakko 557 200 watt soldering iron
Answer:	I don't think I would order this item... this is NOT the picture of the item: Hakko 633-01 Soldering Iron Holder w/ 599B Tip Cleaner..... Go to HakkoUSA.com for the picture and description before deciding to order.... This is a mistake somehow....

Product description

Delcast Soldering Station Caddy combines two convenient soldering fixtures into one compact, all-in-one design. Solder dispenser reel with integrated soldering iron stand positions the necessities right at your fingertips, increasing productivity while reducing risk of accidental burn to person or property. Includes stainless steel basin with sponge for residue removal. About Delcast Delcast' s mission is to provide a reliable and value-priced helping hand to do-it-yourself homeowners and professional tradesman alike. Behind every Delcast product is a commitment to strength, durability, and value. Every Delcast purchase is backed by a money-back guarantee and limited lifetime warranty. Your satisfaction is our promise.



About Delcast

Our mission is to provide a reliable go-to source for precision hand tools by achieving the ideal balance of function, form and price. Behind every Delcast product is a commitment to lasting quality and performance. Each purchase of a Delcast tool comes backed by a no hassle, guaranteed lifetime replacement warranty. Your satisfaction is our promise.

• Solder reel with adjustable arm seamlessly dispenses solder
• Integrated, fully enclosed stand provides a safe place to rest soldering iron between active use
• s at an angle, according to preference
• Reel Capacity: Up to 1kg spool
• Satisfaction guaranteed and backed by lifetime replacement warranty

User questions & answers

Question:	If the tray were removed, would there be a rectangular pocket, like on other models, or would it be a just flat surface
Answer:	the chrome tray comes as a separate piece with an adhesive backing that you apply yourself. if you choose no to apply the sponge tray, then the surface beneath that you are left with is completely flat, with no rectangular indent.
Question:	Will a Hakko fx600 fit this
Answer:	Yea, I think it will, your Hakko has a Diameter of 1.4" and the holding sleeve on this station is about 1.65 in diameter so it should fit with your Hakko Nicely.
Question:	this heats up the handle of my soldering iron everytime i put it in here. is there a way to avoid this
Answer:	i have not had this problem, so it may be an issue with your iron. you could attach a heat sink to the holster as a way to dissipate extra heat. just take some aluminum foil, wrap half of the piece around the hottest part of the holster and expose the other half to as much air as possible (i feel compelled to note that you should always only have a single continuous piece of aluminum)
Question:	I feel sort of silly, but I am a novice to soldering, and I need to know how to use this product. Thanks in advance
Answer:	The product comes with five main parts, 2 screws and 1 screw with a wing nut. The parts are: the station, the fixture for the soldering iron holder (this screws to the side of the station with the two screw holes), the soldering iron holder (which screws to the side of the fixture), the solder dispenser reel, and the stainless steel basin (which comes with sticky pads to permanently stick it to the station and a sponge to clean the soldering iron).The fixture for the soldering iron holder screws to the side of the station with the two normal screws.-the fixture should be on TOP of the station, with the two screws going DOWN. The soldering iron holder screws into the side of the fixture. -this part of the fixture sticks up, has a ROUNDED SHAPE on top, and THREE holes in the shape of a TRIANGLE.-with the side of the station that has two holes facing you, the metal flap on the bottom of the holder should be FLUSH against the fixture, and the ROUNDED PART of the holder should be pointed to the LEFT.-the metal flap of the holder should be screwed on the OUTSIDE of the fixture.-the SMALL METAL PIECE on the metal flap of the holder goes in one of the two BOTTOM holes of the fixture.-the WING NUT screws into the U SHAPED HOLE (the U is upside down) on the metal flap of the holder and the TOP HOLE of the fixture. The holder can be moved higher or lower by loosening and tightening the wing nut.The reel slides into the downward openings in the station. To load solder, take the reel out, slide the solder onto the reel, replace the reel, and pull a piece of the wire solder out enough to pull the wire through the hole in the end of the L shaped piece of metal that is screwed to the side of the station, opposite the soldering iron holder.The soldering iron (doesn't come with the product) goes down into the rounded part of the holder.You can stick the stainless steel basin that holds the sponge to the bottom of the station with the sticky pads.I also found this website to be a good guide on soldering, and suggestions for tools. There are a ton of other guides on instructables for soldering, too.http://www.instructables.com/id/How-to-solder-the-secrets-of-good-soldering/?ALLSTEPSAlso, that's how I put the station together, I don't know if it's TECHNICALLY right, but it worked for me. :)

Product description

Package includes: 1 x Soldering Iron Holder, 1 x Cleaning sponge, 1 x Ball Shell Holder, 1 x Solder Tip Cleaning Wire.

• plastic base and metal stand.
• Suitable for Most Standard Soldering Irons.
• Package includes: 1 x Soldering Iron Holder, 1 x Cleaning sponge, 1 x Ball Shell Holder, 1 x Solder Tip Cleaning Wire.

Product description

YIHUA Premium Soldering Iron Holder with Brass Wool, Cleaning Sponge and Solder Tip Slots. Solid and Steady Base for Your Soldering Iron.

• 【100% Heat-Resistant Design】User safety means the world to us, and that’s why YIHUA innovated this soldering iron holder with 100% Heat-Resistant Design. So you don’t have to worry about damaging the holder due to the high-temperature emitted by the soldering iron when holstered. (CAUTION: DO READ OUR MEASUREMENTS AND MAKE SURE THE RING SIZE MATCHES WITH YOUR SOLDERING IRON)
• 【Solid & Steady Base Design】The base of the holder is designed with a lowered center of gravity with increase weight to sit the holder securely on your desk. This prevent the holder from easily toppling when you’re working, further excelling in user safety. The bottom of the holder is fitted with non-slip rubber stripes to keep the holder in its place and prevent the holder from sliding around when you're drawing and storing the soldering iron.
• 【ALL-IN-ONE】We help save precious work space by integrating the soldering iron holder, cleaning kit (brass wool), cleaning sponge, and the tip slots into ONE. You can store the soldering iron, soldering iron tips, solder wire spools in ONE holder with TWO cleaning options of cleaning sponge or brass wool cleaning kit.
• 【Temporary Tip Storage】The holder comes with tip storage slots at the rear, you can store your regularly used tips in the holder and access them quickly. This helps keep your work space clean and tidy!
• 【Choose YIHUA with Confidence】1-Year Manufacturer Warranty (Exclusive). Plus, our team is providing professional assistance 24/7 right on Amazon. Questions and Suggestions are welcome.

User questions & answers

Question:	Where do i get the replacement small brass wool to fit in the little tin
Answer:	Does come with two tips, a 3/8 diameter and a 1/4 inch diameter but I don't know how intricate the work you can do with that.

• Heavy Duty Soldering Solder Iron Metal Stand Holder
• Material: Metal; Color: Black;
• Easy Installation
• Size: 12.7 x 8.8 x 6 x 9 cm/5 x 3.46 x 2.36 x 3.54
• 30 Days Money Back Guarantee. Any questions, please feel free contact us.

Product description

How to Use

Step 1:Install the battery first （not included）

Step 2:Clamp the object you need to observe with alligator clips

Step 3：Turn on the LED lights, use a magnifying glass to observe or repair your objects

 

Feature：

Product Description:

Product Magnification:3.5X,12X

Material: Metal

Power Source: 3 x AAA Batteries(Not Included)

Range of Use:

Electronic,welding,modelling,stamp,collecting,embroidery,antiques, biological observation,reading etc.

 

Package Contents:

1x LED light magnifying glass

 

Precautions:

1. Iron holder It is fixed and cannot be moved to the left.

2. All parts are tightened with screws. Please make sure the screws are tightened before working.

3. Using manual tools can be dangerous. Be careful and away from children, and always wear protective glasses in the work area

4. Do not expose the magnifying glass to the sun, and do not point the magnifying glass at your eyes, so as not to burn your eyes.

• High-quality Materials: The outer frame of the 3.5X, 12X led light helping hands magnifier station is made of high-quality plastic, and the magnifying glass is made of 6cm thick acrylic glass. The pillar of the magnifying glass is made of stainless steel, which is durable and not easy to rust.
• Lighting Design: The lighting equipment is under the head of the magnifying glass and connected together for your convenience. There are 2 LED lights, which are bright enough and have a wide radiation range. The alligator clip can be removed and used as a separate LED magnifying glass.
• Using Batteries: Magnifying glass stand with clamp and alligator clips uses three AA batteries (the product does not include batteries), so you can work anytime and anywhere without being restricted by power cords and plugs, and can be easily moved using batteries.
• Removable Adjustment Bracket: The Magnifying glass station has a small vise, which can be easily removed and installed. When you do not need to use it, you can remove it without hindering your work. Two detachable small vises can fix objects for you so that you can concentrate on your work.
• Wide Range of Applications: the simple magnifying glass desktop stand is suitable for different occasions, such as repairing electronics, model making, observation, identification of valuables such as jewelry, porcelain, etc. It is very suitable as a gift to men such as husband, father, younger brother, etc.

User questions & answers

Question:	What size of tip? 3/8 or 1/4 inch
Answer:	1/4
Question:	what type of tip is in the weller soldering iron ? may i talk to some one about this soldering iron
Answer:	This soldering iron is useful for small projects like stained glass or electrical repairs. I prefer a temperature regulator control on mine.
Question:	Can you change the tipon this iron
Answer:	You can change the tip.
Question:	How do you control the temperature
Answer:	I have an 80 watt Weller and for my work, I don't need to adjust the temp. But I do have a temperature controller in case I did want to. You buy it separately and the soldering iron plugs into it and it plugs into the power outlet. You can then adjust the contoller to adjust the temperature down.
Question:	Are there additional tips available for the spg80l for more intricate work
Answer:	Does come with two tips, a 3/8 diameter and a 1/4 inch diameter but I don't know how intricate the work you can do with that.
Question:	what is the voltage for this iron
Answer:	Pretty sure - 80 watts. Oh, sorry on the voltage. 110.
Question:	How hot does the iron get
Answer:	It hot ok for 80 watt soldering iron. I have been using it for more than a 2 years and it works ok. Good quality. If you need too hot because you going to use it with bigger pieces then you should get 100 or 120 watts
Question:	Ad is a little confusing...does it come with two size tips
Answer:	Mine has only one tip.

Product description

- Soldering Iron Stand with a cleaning wire pot - Designed for use with hand held soldering irons such as the Hakko FX650 DASH - Small light weight design

• Size: length 186 x width 84 mm.
• Applicable models: FX-600, FX-601, PRESTO, DASH
• Weight: 380 g.
• HAKKO Corporation is the world-renowned product welding company with proven solutions.
• Imported in Japan

User questions & answers

Question:	Why is the picture showing a cell phone cover
Answer:	No, not without the B3730 tip enclosure which allows the FX-601 to use T18 series tips instead of the T19 series.
Question:	Does this stand come with the gold brass sponge holder or do i have to purchase that item separately
Answer:	I have a Hakko 936 station at work, but I just noticed it has a Hakko 907 wand on it. No idea why. This T18-BR02 tip is too narrow on the inside for the Hakko 907 wand. So look at your wand number, not just at the station number. Now strangely, Hakko says this tip fits the 936 station, with the 907 handpiece. This T18-BR02 tip doesn't fit it. It may be a counterfeit. Hakko link for tip and compatibility: https://www.hakkousa.com/products/soldering-iron-tips/t18-series/t18-br02.html
Question:	Is this the correct holder for a Hakko FX
Answer:	Yes. The item I received came inside a 5”x2” plastic packet with “Hakko” logo and a line drawing of a soldering iron printed on one side. On the other side of the packet, you’ll have information about the tip: T19-D65 • Shape - 6.5D • Made in Japan • This tip/nozzle is plated with lead-free solder • Hakko logo • barcode - 4962615038747 and 4 symbols denoting recycling, green and e-qualifications.
Question:	Will this hold a TS100 iron
Answer:	I suppose you could but I would probably use a smaller tip like a pencil tip. I am not sure if you mean you are removing 5mm or have 5mm in between the items to be removed.