11 best mini heat guns

Product description

Packing details:

1*Hot Air Gun

1*Additional replaceable protecting cap

• Easy to use, Just keep 5-6cm distance from your amazing work and to heat it at about a 45 degree angle until completed.
• Made of high quality ABS plastic outside and stainless steel inside, lightweight, simple and durable.
• Handing part adopts salient point nonskid designs that cause safe handholding with small energizing.
• The temprature can not be adjusted, but it can reach at about 200°C/390°F within a few seconds abstractly which heat up quickly and works like a charm.
• Packing details: 1*Hot Air Gun, 1*Detailed Instructions, 1*Additional replaceable protecting cap (accessories)

User questions & answers

Question:	Can this be used to re-melt & smooth the tops of my soy candles
Answer:	Sure.
Question:	Would this soften a vinyl album
Answer:	yes
Question:	How hard does it blow
Answer:	Hi, our heat gun can be use as a auxiliary tool of weld seams
Question:	Hi! Also work with 220v
Answer:	It will stand on its own with the nozzle point straight up (vertically).

Product description

12

• ★ Long Cable Enough for Crafting : 6.56FT Long Cable !!!!! Hot air shrink gun was made of high quality stainless steel inside and ABS plastic outside,simple design and durable quality, mini dimensions 240*50mm / 9.44*1.97in
• ★ Suitable for:This excellent compact heat gun can be used for heating shrinkable film, embossed powder,rubber stamp.Built-in stand for self-support and table top use
• ★ Voltage&Cooling Holes:Voltage 110V, the temp of the nozzle could reach to 200° in seconds.The heat vents of heat gun tail can decreased the internal high temp and extend the life
• ★ DIY Essentials Part : If you like DIY, this is a good accessory for you. Even ,you can replace toaster or oven and the polymer clay will become hard and bright after using the gun
• ★ Warm Tips:The temp of the nozzle could reach to 200°in seconds,please don't use it more than 10 minutes in one time, just turn off then turn on for working continuously

User questions & answers

Question:	does it get hot enough to deform pvc(so that i would be able to adjust the shape
Answer:	Yes. It can also be used to repair holes, rips or tears in vinyl.
Question:	will this work to Heat Shrink Connectors for Electrical splicing
Answer:	Don’t no
Question:	Does it melt shrink wrap smoothly
Answer:	Same here.. and not sure if has a fan or is it intended to just use convection to direct the heat ? Mine just poured smoke and didnt seem to put out much heat. I'm used to a forced air coming out of a heat gun.
Question:	Will this work on sealing packages in bubble wrap
Answer:	Dear customer 1500D: 752℉& 1112℉(400℃ & 600℃) features High/ Mid/ Cool/ Off control [ III: 500 L/min, II: 250 L/min,I: 500 L/min, Off] 1500H: 662℉& 1112℉(350℃ & 600℃) features High/ Mid/ Off control [ II: 500 L/min,I: 300 L/min, Off] Thanks

Product description

Mlife DIY Mini Heat Gun Features:

Handle Material: ABS

Size: 195 × 30 mm/ 7.5 ×1.3 in

Working Temperature: It can reach at about 200°C / 390°F within a few seconds

Rated Power: 130W

Power Type: AC power supply

Rated Voltage: 120V

Frequency: 50-60Hz

Power Cable Length: 6.56 ft / 2 m



Packing Included:

1 × Mini Heat Gun

1 × User Instruction



Notes:

1.In order to avoid hazard, please kindly read the instruction before using.

2.Please keep the item away from children avoid accident.

3.This kind of heat gun can not adjust the temperature but it heats up quickly at about 200°C theoretically.

4.Therefore do not blow your Polymer Clay Works at one position for a long time to prevent distortion.

5.Simply keep 2-3 inch away from your DIY craft at about a 45 degree angle and heat the craftwork, it can reach at about 200°C/390°F easily within a few seconds.

6.This heat gun is not a High Power one due to its 130W low power. But it is great for heating shrinkable film, embossed powder, rubber stamp and etc.

7.Do not use it continuously for more than 10 minutes to avoid the machine overheating and scald.

8.Do not touch the hot nozzle when using or just after use.

9.Do not use in presence of an explosive atmosphere.

10.Do not use outdoor.

• Portable Mini Heat Gun: Mlife mini heat gun is much smaller than the usual heat gun (7.5” × 1.3 ”), much portable but still powerful, with high power heating up quickly. As a DIY lover, Mlife Mini Heat Gun can be a perfect helper to carry.
• Multifunctional & Essential for DIY: Widely used for DIY projects such as burning powder, removing old painting, shrinking Wrapping film, making candle, epoxy resin, rubber stamp, defrosting and removing mud and dirt etc.
• Long Cable and Extensive Handcrafting: With 6.56 ft (2 m) extended cable, longer more than any other mini heat guns is much easier for you to handle wider.
• Easy to Use: Simply keep 2-3 inch away from your DIY craft at about a 45 degree angle and heat the craftwork, it can reach at about 200°C/390°F easily within a few seconds which can make the work more quicker and more efficient.
• Warm Tips: Please don't use it more than 10 minutes in one time to avoid scald. If you're not happy with our product, please feel free to contact with us and we'll give you a full refund or a replacement within 24 hours.

User questions & answers

Question:	Can I use this devise for plastic welding
Answer:
Question:	Will it melt the adhesive behind metal backsplash? It's neatly done so nothing is smeared from behind the metal out the sides
Answer:
Question:	Can I use this heat gun for scorching wood
Answer:
Question:	Can I use this heat gun for acrylic pours
Answer:

Product description

The DCE530B 20V max* cordless heat gun can take you places your corded heat gun can't. The cordless heat gun's compact design allows for use in tight spaces and diverse applications. From heat shrinking wire tubing to paint and decal removal, This cordless heat gun gets the job done. It features up to a 990 degrees F max output temperature** and comes with two temperature settings. The specialty Lock on and off feature allows for hands free operation as needed. The nozzle is the standard size of traditional heat guns, allowing attachments from corded units and other brands to fit with ease. This cordless heat gun includes a flat nozzle and hook nozzle attachment. Battery and charger sold separately.

• Up to 990 degrees F/532 degrees C max output temperature
• Up to 42 minutes of run time per charge
• Led light to brighten dark areas when tool is in use
• Lock off trigger to engage manual operation
• 6.7 CFM

User questions & answers

Question:	Can this be used to loosen glued furniture dowels
Answer:	ground-5foot, plug to outlet-6foot,&lead-5foot
Question:	Does this heat gun have a re settable fuse
Answer:	Yes
Question:	will it work on tpo or epdm
Answer:	I've also saw inetub seems good if you want to buy local get lincoln nr211 mp inershield wire I use .030 size for most of my use make sure the tip size on gun matches your wire common sizes are .025 .030 .035 .025 is usually used with gas so really you would want .030 .035 thicker metal thicker wire you want
Question:	What is the approximate temp at the low setting
Answer:	Wrong answers!! But you need a welder capable of using shielding gas, and you'd use 100% argon. Aluminum wire is soft and it wouldn't make it from the machine to the torch handle so you'd want a spool gun (which would cost twice as much as this chintzy welder). So yes you can use a DC welder to weld aluminum, just not this welder. Probably cost you nearer to $1000 to get a capable setup for aluminum.

• The mini heat gun has a temperature control setting. When the temperature is too high, it will automatically cut off power. Customers don't need to worry, as long as the temperature drops, they can continue to use.
• Heating tools,can be used in soft clay.Built-in stand for self-support and table top use.
• General purpose heat pen for crafts.Heat pen size is smaller than the heat gun, the function is the same, and the work is finer.
• At heat pen tail, the heat vents designed in both sides to reduce the internal temperature and extend the product duration.
• Mini Heat pen great for heat shrink tubing, embossing, drying paint, paper, fabrics, craft foams, glue, ink, DIY, firm shape, clay

User questions & answers

Question:	Does this work for getting out the bubbles on resin projects
Answer:	Please search for Velo vinyl multi speed grip.
Question:	Secouede usar para hacer lazos o marcar cintas de tela o gros
Answer:	Funny you ask! I actually purchased these for my son's Firmstrong 26" also! They fit perfectly, feel great and look so much better than the cheap foam ones that his bike came with, as well! Highly recommend!
Question:	This gun will work with embossing powders for stamping
Answer:	You can make it how ever you want by twisting the grip on the bar. I have mine set up with the stitch down, so may palms are on the flat and my finger tips just touch the stitch. BTW - I have had these on my beach cruiser for about 3 years and they still look perfect. They have held up well, look cool and I am very happy with them.
Question:	Will this work for popping bubbles in resin
Answer:	They are flexible you might have to cut the end they are designed to be at the end of the bar so if you take the end piece out or cut the end off you should fine.

Product features

Pink

Multifunctional: suitable for handicrafts,embossing powder, vinyl wrap,epoxy resin, shrink packaging, shrink tube connectors, decals, wine bottle shrink bags, EVA foam,shrink film,welding, jewelry manufacturing,wax, beeswax, candle making, etc.!

Purple

Multifunctional: suitable for handicrafts,embossing powder, vinyl wrap,epoxy resin, shrink packaging, shrink tube connectors, decals, wine bottle shrink bags, EVA foam,shrink film,welding, jewelry manufacturing,wax, beeswax, candle making, etc.!

White

Multifunctional: suitable for handicrafts,embossing powder, vinyl wrap,epoxy resin, shrink packaging, shrink tube connectors, decals, wine bottle shrink bags, EVA foam,shrink film,welding, jewelry manufacturing,wax, beeswax, candle making, etc.!

Black

Multifunctional: suitable for handicrafts,embossing powder, vinyl wrap,epoxy resin, shrink packaging, shrink tube connectors, decals, wine bottle shrink bags, EVA foam,shrink film,welding, jewelry manufacturing,wax, beeswax, candle making, etc.!

Colorful

Product description

Features

【High Power】 Heatgun made of 380W high power motor(120V) which can heat up fast in seconds provides huge heat making sure your work more efficient.

【Long Time Using and Overheat Protection】 Heating gun having overheat protection can be used for 250 hours constantly and will not burn out, consisting of nickel-chromium heating wire structure and mica bracket, which extends the service life.

【Easy To Use and Adjustable Temp】 Setting plug and switch, then starting to use heater gun hand-free by opening the stand. for different projects, it provides temperature 1: 480℉(250℃) air flow 100L/min or temperature 2: 850℉(450℃) air flow 200L/min.

【Portable Design and Long Cable】 Heatgun has 0.66lb light weight and 9.84 x 1.97 x 1.97 inch small size, which makes it portable and used for narrow space. besides, this heat tool has a 7.2Ft cable providing you longer using distance.

【Wide Application and Product Service】 With the cone nozzle, you can used the small heat gun for epoxy resin supplies/crafts/shrink wrapping/soldering/vinyl wrap/wire connectors/candle making/embossing/phone repair/resin dryer/crafting supplies/bubble buster/shrink tubing/blower/automotive/epoxy dryer/paint dryer and so on. Product Service: if you have any questions about our hot gun in 2 years, please contact us, we are happy to help.

Specifications:

Product Size: 9.84 x 1.97 x 1.97 inch

Product Weight: 0.66lb

Wire length: 7.2ft

Working temperature: temperature 1 480℉(250℃) air flow 100L/min or temperature 2 850℉(450℃) air flow 200L/min

Power: 380W

Voltage:120v(50Hz)

Material: PA6+GF30

Working time: 250hours

Color: orange

Package Include:

1 x HGP40AC Heat Gun

1 x Cone Nozzle

1 x User Manual

• 【High Power】 Heatgun made of 380W high power motor(120V) which can heat up fast in seconds provides huge heat making sure your work more efficient.
• 【Long Time Using and Overheat Protection】 Heating gun having overheat protection can be used for 250 hours constantly and will not burn out, consisting of nickel-chromium heating wire structure and mica bracket, which extends the service life.
• 【Easy To Use and Adjustable Temp】 Setting plug and switch, then starting to use heater gun hand-free by opening the stand. for different projects, it provides temperature 1: 480℉(250℃) air flow 100L/min or temperature 2: 850℉(450℃) air flow 200L/min.
• 【Portable Design and Long Cable】 Heatgun has 0.66lb light weight and 9.84 x 1.97 x 1.97 inch small size, which makes it portable and used for narrow space. besides, this heat tool has a 7.2Ft cable providing you longer using distance.
• 【Wide Application and Product Service】 With the cone nozzle, you can used the small heat gun for epoxy resin supplies/crafts/shrink wrapping/soldering/vinyl wrap/wire connectors/candle making/embossing/phone repair/resin dryer/crafting supplies/bubble buster/shrink tubing/blower/automotive/epoxy dryer/paint dryer and so on. Product Service: if you have any questions about our hot gun in 2 years, please contact us, we are happy to help.

Product features

High Power

With 380W high power motor(120V), hot air gun heats to 850℉ in seconds providing huge heat which makes sure your project success

Dual Temp

For different projects, you can choose temp 1: 480℉(250℃) air flow 100L/min or temperature 2: 850℉(450℃) air flow 200L/min.

Overheat Protection

Consisting of nickel-chromium heating wire structure and mica bracket, overheat protection makes sure heat gun will not burn out and extends the service life.

Long Time Using

250 hours, it is the time you can use the heat gun constantly which is composed of heat-resistant material PA6+GF30.

Easy and Hand Free

Setting plug and switch, opening the stand, now you can use heat gun hand free.

Compact Design

0.66 lb light weight and 9.84 x 1.97 x 1.97 inch small size make it portable and used for narrow space.

Long Distance Use

A 7.2 Ft cable provides you longer using distance, it means you don’t need to change sockets again and again

2 years Product Service

If you have any questions about our hot gun in 2 years, please talk to us, we are happy to help.

Wide Application

With the cone nozzle, you can used the small heat gun for epoxy resin supplies/crafts/shrink wrapping/soldering/vinyl wrap/wire connectors/candle making/embossing/phone repair/resin dryer/crafting supplies/bubble buster/shrink tubing/blower/automotive/epoxy dryer/paint dryer and so on.

Product description

Features:

【High Power】 Resin heat gun can reach at about 350℃/662℉ easily in seconds with 350W high power which can make the work more quicker and efficient.

【Overheating Protection】 Heat gun for crafts will not get smoke or burning after long time using because of nickel-chromium heating wire structure and mica bracket, which can speed up heat dissipation and extend the service life.

【Well Made Design】 Our portable heat guns is lightweight(0.6 lb) heat tool due to the excellent scientific ergonomic design which can prevent repetitive strain injuries and other musculoskeletal disorders; Non-slip rubber grip makes your hand comfortable and easier to hold the product tightly.

【Easy and Long Endurance】 Just put on plug and turn on switch, then starting to work. heat shrink gun can be used for 250 hours constantly because of its long endurance which is the guarantee of your successful project.

【Wide Application and Product Service】 With the reflector nozzle, you can use the small heat gun for shrink wrapping, epoxy resin, crafts, vinyl wrap, wire connectors, candle making, shrink tubing, embossing, phone repair, electronics, remove painting, shrink tubing, defrost, remove mud dirt and so on. PRODUCT SERVICE: if you have any questions about our product in 2 years, please contact us, we are happy to help.

Specifications:

Product Size: 8.85 x 1.88 x 1.96inches / 225*45*55mm

Product Weight: 0.6lb / 275g

Wire length: 6.56ft / 2M

Working temperature: 662°F / 350°C

Power: 350W

Voltage:120v(50Hz)

Material: PA6+GF30

Working time: 250hours

Color: red

Package Include:

1 x Mini Heat Gun

1 x Reflector Nozzle

1 x User Manual

• 🎁Special Gift for Families or Friends🎁
• 🎁【High Power】 Resin heat gun can reach at about 350℃/662℉ easily in seconds with 350W high power which can make the work more quicker and efficient.
• 🎁【Overheating Protection】 Heat gun for crafts will not get smoke or burning after long time using because of nickel-chromium heating wire structure and mica bracket, which can speed up heat dissipation and extend the service life.
• 🎁【Well Made Design】 Our portable heat guns is lightweight(0.6 lb) heat tool due to the excellent scientific ergonomic design which can prevent repetitive strain injuries and other musculoskeletal disorders; Non-slip rubber grip makes your hand comfortable and easier to hold the product tightly.
• 🎁【Easy and Long Endurance】 Just put on plug and turn on switch, then starting to work. heat shrink gun can be used for 250 hours constantly because of its long endurance which is the guarantee of your successful project.
• 🎁【Wide Application and Product Service】 With the reflector nozzle, you can use the small heat gun for shrink wrapping, epoxy resin, crafts, vinyl wrap, wire connectors, candle making, shrink tubing, embossing, phone repair, electronics, remove painting, shrink tubing, defrost, remove mud dirt and so on. PRODUCT SERVICE: if you have any questions about our product in 2 years, please contact us, we are happy to help.

User questions & answers

Question:	Does anyone know the dimensions of the heat gun? Not the package dimensions, thanks
Answer:	wire diameter inches Flux-core steel .035 .030 MIG steel .035, .030, .025 MIG aluminum .035 Includes a drive roll for .025 to .035, sample spools .025 MIG, .035 flux-cored. Includes the spindle adapter for 8 inch diameter spools. optional drive roll for .035 to .045 sold separately
Question:	You give temperature in Celsius but it doesn't make sense so confirm is the temperature options in Fahrenheit
Answer:	The small electric motor on the wire feeder does not work anymore. My machine is a MasterCraft. the piece I need is the same as the one to order
Question:	Can i use this to make a hole (circle) in one of those clear diy ornaments? it is made out of hard plastic
Answer:	I bought mine for my 110 and it fits and works great but it would depend on what brand and model you may have he may have to do some modifying to either the housing or the welding machine itself but nothing too hard to do
Question:	Does this get hot enough to melt solder
Answer:	Yes it comes with the motor.

Product features

350W and 662℉（350℃)

Strong power (350W) ensures it can quickly heat up to the maximum temperature 662℉(350℃) in seconds.

Superior Quality

With Nickel-chromium heating wire structure&mica bracket, it can maximize heat loss.The heat vents can decreased the internal high temperature and extend the life.

6.56Ft (2M) Long Cable

The hot air gun has 6.56Ft (2M) extended long cable, more than other competitors.

Lightweight Design

Mini lightweight fuselage so that you could hold it as easy as hold a pen.

Nozzle Accessory

The heat gun comes with a nozzle accessory, which can protect other parts of your work will not influenced by the hot air but only blow to the part you need.

Perfect for Card Making

This embossing heat gun is with 300 L / min air speed, which melts embossing powders nicely without blowing them all over the paper.

Wide Application

The mini heat gun is perfect for DIY, embossing powder, electronics repairing, heating shrinkable film, clay, rubber stamp, quick-drying coating, catalytic adhesive, PVC shrinkage of packaging.

Start your colorful DIY life!

Enjoy the happy time with your children, family or friends!

Alerts!

• Do not touch the nozzle immediately after heating.
• Do not let the child use the heat gun alone.

Product description

Mini 300 watt heat gun for embossing powder. Fast and easy to use for multi-function DIY works.

Comfortable and lightweight heat gun, ideal for heat shrink tubing, embossing and drying a variety of paints, glues, and inks.

Built-in stand for self-support and table top use.

Specification:

Material: ABS Plastic

Length: approx. 24cm

Power Cable: approx. 1m

Working temp.: 200 ℃

Power: 300W

Voltage: 110V 50-60HZ

Weight: approx. 310g

Plug Type: US Plug

Package Includes:

Heat Gun x1

Manual (English) x1

Instructions:

Power on the embossing tools.

Hold the product as shown on the picture.do not touch the hot nozzle.

Keep 5-6cm distance between the heat tool and item.

Suggest do not continuously use more than 10 minutes to prevent overheated.

• Unique Heat Shrink Set: Containing 40pcs Heat Shrink Tubing and a 24 cm Heat Gun. Both can be used together, fully considering your needs, once to meet all needs.
• Professional Grade Tubing: All heat-shrink tubing are professional tubing. High-quality standard tubing can better protect your wiring. It can be used not only to repair wires,but also for hand-made.
• This Heat Gun Professional for Plastic Pipe: This hot air tool has an operating temperature of 200 degrees Celsius（392℉）.
• Two Vents on Both Side: This hot air gun is designed with two vents on both sides, which can better dissipate heat, reduce damage and extend the service life of the air gun.
• Power not to be underestimated: even such a small heat gun can quickly reach 300W of power. Small and compact, but it makes a huge difference! The hot air is rolling in.

User questions & answers

Question:	Can this be used with embossing powder
Answer:	Each Drawer 12" x 8" x 2.5" Overall dimensions: 27-3/4" L x 16-1/2" W x 30-1/2" H
Question:	What does it do exactly? May you please upload a video explaining its function
Answer:	No it don't weigh 5 pounds. More like 30 to 40 with the small roll of wire
Question:	Is the pink hard plastic or rubber
Answer:	This welder cannot run 1/8 " anything it's limit is 3/32 I know I have one outside in my shop and use it every day and honestly it doesn't run 6010 very good
Question:	What are the small plastic parts for? Maybe wiring? If so, how would it go over the cords ends
Answer:	The Lincoln LE31MP can be used with the PTA-9 Tig torch for maximum versatility and maneuverability or the foot pedal for the optimum amperage needed for any TIG project. You can TIG weld with or without the foot pedal as this welder will automatically detect and configure when a foot pedal is connected.

• VARIABLE SPEED / HEAT SETTINGS: The only one of its kind, our heat gun combines a low speed/heat setting for delicate or detail work, with a high speed/heat setting for heavy-duty or high-volume work, all in a compact easy to handle package. It’s like having a mini-heat gun AND a full-size heavy-duty heat gun all in one!
• VERSATILE: Perfect for crafts, automotive, electronics, embossing powders, vinyl wrap, HTV, epoxy resin, shrink wrapping, shrink tubing, shrink tube connectors, decals, wine bottle shrink capsules, EVA foam, transfers, acrylic, shrink film, cell phone repair, tablet repair, screen repair, soldering, jewelry making, wire connectors, butt connectors, wax, beeswax, soy, candle making, and more!
• INSULATED - ERGONOMIC - LIGHT WEIGHT - QUIET: cheap mini heat guns get too hot to hold. Traditional large “gun-style” heat guns get too heavy and awkward to handle for extended periods. Chandler Tool saves the day with the perfect balance of compact size, light weight & low-noise to minimize fatigue on even the longest jobs
• UL-CERTIFIED - Be careful! Poor-quality heat guns are both a fire hazard & an electrical shock hazard! Most generic heat guns are NOT manufactured to North American safety standards & are NOT safety certified. Underwriters Laboratories “UL” is the industry standard for North American safety certification. UL Certification ain’t cheap, but we’re proud to say we won’t sell a heat gun without it
• AMERICAN BRAND - Tired of buying poor-quality “throwaway” products from overseas sellers who don’t care about their customers? Chandler Tool is a good ‘ol American brand, located right here in the greatest country on Earth - the United States of America. Though many of our tools are manufactured overseas, our company is located in America, we employ Americans & we pay American taxes, just like you

User questions & answers

Question:	will this work on the solder shrink tube connectors
Answer:	Yes it does. I used it to remove sticky tape from car badges. As well as applying a 3M vinyl on my headlights. It gets extremely hot
Question:	Will this work well to remove decals from a vehicle
Answer:	I haven't tried it but I suppose if you leave it pointed on the soft plastic long enough then it might melt it. That's my best guess.
Question:	Can i use this to pop bubbles in resin
Answer:	I feel like it would be to strong for smd/sme's assuming your talking about things like mother board components. The airflow seems similar to a large multi speed heat gun on low speed.
Question:	Does it work well for setting vinyl onto yeti tumblers
Answer:	The product is ergonomically designed and matched with soft rubber, which effectively reduces fatigue during long-term use. The product is equipped with a stable stand, which can be used while standing.

Product features

Heat Gun For Everything

Perfect for embossing, shrinking, wrapping, paint removal, drying, melting, weathering, soldering, image transfer, and more!

Loaded With Features

• Two Heat / Speed Settings
• Nozzle Safety Shield
• Extra Long 6-Foot Cord
• Insulated Body
• Stand included

Safe and Secure

All Chandler Tool products are UL-Safety Certified. We are committed to providing quality tool and products.

Product description

The HT400 Heat Tool is a versatile heat gun for home, workshop and hobby projects. Its small size is ideal for getting into hard to reach places and working on delicate crafting and DIY related projects. Its simple, pencil-like design features a dual high (680°F/360°C) and low (450°F/230°C) temperature setting that allows you to complete countless projects. Some project ideas include embossing cards and other crafting projects, repairing electronics or wire, shrinking electrical tubes, shrink wrapping presents, making jewelry and more. The heat gun also has a retractable stand, allowing for hands free operation when your projects requires two hands. Whatever your next project that requires heat, the HT400 is the tool for you

From the Manufacturer

The HT400 Heat Gun gives outstanding performance in a small package. The heat gun is ideal for crafts and hobbies. Use it to apply embossing powders, applique and shrink wrap. Remelt adhesives and form plastic material. It is also great for applying electrical shrink wrap.

• DUAL TEMPERATURE HEAT GUN: The HT400 heat tool is a durable, versatile heat gun for home, workshop, craft and hobby projects. It features dual high 680°F (360°C) and low 450°F (230°C) temperature settings
• HANDS FREE FEATURE: Use the installed, retractable stand for hands free operation to easily complete all of your household heating and crafting projects
• MANY PROJECT USES: The Wagner heat embossing gun can be used to apply heat shrink tubing around wire, emboss cards and crafting projects, remove stickers, shrink wrap presents, make jewelry and more
• PRECISE CONTROL: The small size makes the HT400 heat gun great for getting into hard-to-reach places and concentrating high heat on small areas
• COMPACT DESIGN: The unique angled design offers three operating positions (palm, pencil and hands free), ensuring the best fit and feel for your project

User questions & answers

Question:	Is this heat gun the same one as the Hero Arts heat gun? Thanks
Answer:	I don't think so.
Question:	Hello guys I need to know if it is working V120 or V
Answer:	You simply pull the clip down in the direction the cable exits the camera module, and the same on the raspberry pi, they have pretty much the same clip on both the pi and the camera module, at the side of the socket where the cable is inserted there are plastic tabs, carefully pull both sides down away from the camera module to release the cable.
Question:	removing old paint
Answer:	We also offer a 2 ft version, see ASIN B00M4DAQH8. I do not believe there is a 3 or 4 ft version.
Question:	I seen this has a 3-prong plug. If I get a 2 prong adapter and reverse polarity, can I use it to cool things down
Answer:	It’s 12 in long at least. Definitely not 2

Product features

Versatile Heat Gun for Home and Crafting Projects

The HT400 Heat Gun is perfect for home, workshop, craft and hobby projects. It can be used for shrink wrapping, embossing projects and more.

Two Temperature Settings

Find the ideal heat output for your project by using the two temperature settings. The gun features a high 680°F (360°C) and low 450°F (230°C) temperature setting.

Compact Design

The heat gun’s design allows for precise heating application, which is great for small, delicate projects. It offers three operating positions (palm, pencil and hands-free) for added versatility.

Shrink Wrapping

Use the Micro Heat Gun to apply concentrated heat when shrink wrapping plastic around soap, gift boxes, candy and more!

Embossing

Complete your next embossing project by using this hot air tool. The pencil design makes it simple to apply controlled heat when embossing cards, paper and scrapbooking material.

Wire Heat Shrink Tube

Cover damaged wires or cellphone cables by shrinking tube around the exposed sections. Apply heat with the HT400 to securely shrink the tube and get the job done quickly.

Product description

Features:

Material:Stainless Steel + ABS

Size:225*45mm/8.86*1.77in

Type:Constant temperature

Working Temperature:It can reach at about 200°C / 390°F within a few seconds

Rated Power:300W

Power Type:AC power supply

Rated Voltage:110v

Frequency:50-60Hz

Plug Type:US plug

Power Cable Length:98cm/38 inch



Packing Included:

1 * Hot Air Gun

1 * User Manual



Notes:

1. This kind of gun can not adjust the temperature but it heats up quickly at about 200°C theoretically.

2. Therefore do not blow your Polymer Clay Works at one position for a long time to prevent distortion.

3. Keeping 5-6cm distance from work and about a 45 degree angle to heat until it is completed.

4. This heat gun is not a High Power one due to its 300W low power. But it is great for heating shrinkable film, embossed powder, rubber stamp, the best choice to replace toaster or oven and the polymer clay will become hard and bright after using the gun.

5. Caution with child ! ! ! Please minor children in the safe use of hot air gun under the guidance of an adult to accompany!

6. Do not use it continuously for more than 10 minutes to avoid overheating the machine!

7. Do not touch the hot nozzle when using or just after use.

• ★ Material ★: Hot air shrink gun was made of high-quality stainless steel and ABS plastic, Dimensions 225*45mm / 8.86*1.77in
• ★ Voltage&Cooling Holes ★: Voltage 110V, the temp of the nozzle could reach 200° in seconds. The heat vents of the heat gun tail can decrease the internal high temp and extend the life
• ★ Suitable for ★: heating shrinkable film, embossed powder, rubber stamp. Built-in stand for self-support and tabletop use
• ★ Handing part ★: adopts salient point nonskid designs that cause safe handholding with small energizing
• ★ Warm Tips ★: The temp of the nozzle could reach 200° in seconds, please don't use it for more than 10 minutes at one time. 12-month Warranty, [100% Money Back Guarantee] If you're not happy for any reason, simply contact us and we'll give you a full refund and no need to return the product