12 best lipo battery bag

Product description

This fireproof bag/pouch allows you to charge up to 2 DJI Mavic Pro Intelligent Flight Batteries safely. Of course it could be used for any other LiPo batteries that you could fit in as well. Most airlines will only allow these batteries as carry-on luggage when you have a safety bag/pouch like this to fully seal your un-fully charged batteries in. To reduce the chances of damage in the event of a fire, you should store your batteries in this bag/pouch even when you are not using them. Safety Remark: Never leave charging battery unattended. Always ensure the battery is on a non-flammable surface. Ensure flap is sealed while charging. Place the bag flap side down.

• Designed for DJI Mavic intelligent flight battery originally but could be used for any other Lithium batteries that you could fit in
• Made of high temperature, heat and flame resistant thermal insulating fiberglass fabric
• fireproof and anti-explosion for safe charging, storage, transportation and travelling
• Size: 11 3/4" x 9 ", weight: 0.3Lb

Product description

This high quality glass fiber bag is suitable for DJI Mavic mini drone, with an eye-catching appearance and fashionable design it easily standout and distinguish from other bags. Explosion-proof material ensure the safety of your drone, great choice to take your drone out.



Feature:

The surface material is water-proof, dust-proof and easy to clean.

Explosion-proof material ensure the safety of your drone.

Design hand-pack design, easy and convenient to carry.

Smart size, perfect for 3 DJI Mavic mini drone batteries at the same time.

Any problem, please contact our store without hesitation. Honor to serve you.



Specifications:

Item name: Explosion-proof Bag for Mavic Mini Battery

Material: Glass Fiber

Color: Black

Hold battery Qty.: 3PCS



Package Information:

Package size: 11.6 * 9.1 * 1.6cm

Package weight: 57g



Note: There might be some deviation due to manual measurement.



Package List:

1 * Explosion-proof Bag

• The surface material is water-proof, dust-proof and easy to clean.
• Explosion-proof material ensure the safety of your drone.
• Design hand-pack design, easy and convenient to carry.
• Smart size, perfect for 3 Mavic mini drone batteries at the same time.
• Any problem, please contact our store without hesitation. Honor to serve you.

Product description

iFlight Lipo Guard Lithium Battery Explosion-Proof Bag Portable Carrying Bag For 3S 4S Battery FPV Racing Drone Accessories 240MMx65MMx180MM



Lithium battery explosion-proof bag is made of high-quality environmentally-friendly flame-retardant material for storing lithium batteries or other batteries, which can play the role of explosion-proof and fireproof. It is suitable for safe storage of lithium batteries, or for safe isolation of batteries when charging. In order to use lithium batteries safely, this product is a must choice

Charging and storing the battery can be placed inside the protective bag

Safe and environmentally friendly, more assured, more worry-free



Product features: lithium battery protection, bromine hydrogen battery protection All kinds of battery protection, charging protection! When charging, you can put the battery in the bag to charge the battery. When the battery is not in use, put it inside to prevent the battery from being natural.



Length: 240MM width: 65MM height: 180MM

• Length: 240MM width: 65MM height: 180MM
• made of high-quality environmentally-friendly flame-retardant material
• Charging and storing the battery can be placed inside the protective bag
• Safe and environmentally friendly, more assured, more worry-free

Product description

Ideal for storing multiple 3S lipos, Magnum XL Lipo Safe (9.5" x 7" x 2.25") is designed for transporting your batteries safely and conveniently to the flying field. It features both a heavy-duty handle and elastic straps inside the bag to secure your lipos in place.All of our Lipo Safe bags are made from durable fire-resistant materials to help protect you and your belongings in the event of a lipo battery fire. With a secure heavy-duty self-securing closure closure and vents to reduce pressure, Lipo Safe bags are designed to help contain the heat and flames that can result when a lipo combusts during charging or while in storage.While Lipo Safe bags can help provide some much-needed protection, it is still crucial to follow the proper precautions for Lipo battery charging at all times.

• Holds: Multiple 3S Lithium Polymer battery
• Dimensions: 9.5 x 7 x 2.25" (241.3 x 177.8 x 57.15mm)

Product description

Package included:

Li-po safe bag x1

• Li-Po Battery Safe Bag Fireproof Storage Bag for DJI Mavic 2 Zoom / Pro Drone. 3-Pack of Small Size.
• Charge with confidence knowing your home is safe from a li-po fire. Fire prevention, Radiation protection, Explosion proof.
• Material: Fireprrof nylon, weight: 42g (Small) Color: black
• Great for travelling, charging, storage, keep your stuff away from a fire disaster.

Product description

QWinOut Fireproof RC LiPo Battery Portable Explosion-Proof Safety Bag Safe Guard Charge Sack



Many size is optional on my shop.

Product description

The Z-Block Fire Containment Bag contains fires caused by the Lithium-Ion batteries used to power laptops, smartphones, tablets, and other personal electronic devices (PEDs). Fire containment bags are most commonly used aboard aircraft and in other confined spaces where a Lithium-Ion battery fire is likely to lead to extensive property damage or loss of life. The Z-Block Fire Containment Bag has been tested extensively with live battery fires, and the fire resistant materials used to fabricate the fire containment bag have been tested in accordance with FAA standards. This Fire Containment Bag feature several layers of advanced Z-Block Flame Resistance Fabric, ZetexPlus Vermiculite Coated Fiberglass Fabric, and Z-Flex Aluminized Fabric to ensure that heat and fire remain contained. The kit includes a pair of X20 high temperature gloves and a silica fire blanket. This kit is easy to store, easy to use, and requires minimal training. The Z-Flex X20 high temperature gloves feature an aluminized back and leather palm to protect hands from the extreme heat associated with Lithium-Ion battery fires while providing good grip and dexterity for handling small electronic devices. The Z-Sil Silica fire blanket is designed to knock down flames before the handler attempts to move a burning device. The fire blanket also serves as an additional barrier when moving the device into the fire containment bag.

• The Z-Block Fire Containment Bag is designed to contain fires caused by the Lithium-Ion batteries used to power laptops, smartphones, tablets, and other portable electronic devices.
• This kit includes X20 Z-Flex Gloves to protect hands from extreme heat and a Z-Sil Silica Fire Blanket to knock down flames and fire barrier while moving the device int the bag.
• Newtex fabrics have passed an array of tests for flame penetration resistance, including FAR 25 Appendix F Part III from the Federal Aviation Administration (FAA).Materials tested in accordance with FAA standards
• The bag measures 24" W x 18" L x 0.25''D
• Designed & manufactured in Rochester, NY by Newtex Industries, Inc.

User questions & answers

Question:	If no runaway occurs, are the bags reusable
Answer:	Once the bag is used to contain a fire, it must be replaced.
Question:	Does the bag come with the gloves pictured
Answer:	The gloves are sold separately.
Question:	What size battery is this rated for
Answer:	The bags are not rated, but Newtex performs testing with 18650 rechargeable lithium batteries.

Product description

Specifications:

Battery type: Lithium-Polymer Battery

Output voltage: 11.4V

Capacity: 3830mAh

Power: 43.6Wh

Battery Weight: 230g /8.11oz

Power ON/OFF:

Press once and holder the circular power button for 2 seconds to power on/off

Compatible with:

DJI Mavic Pro

DJI Mavic Pro Platinum

DJI Mavic Pro Alpine White

Original DJI Mavic Pro Charger

Not compatible with DJI Marvic 2

Package includes

2 x Battery for DJI Mavic Pro Drones

• High-capacity drone battery 3830mAh(LiPo cells, voltage: 11.4V, power: 43.6Wh), our battery provides 25-30 mins flying times in general environment entirement on a single charge.
• Over-discharge, over-load and short-circuit protection is active. CE, FCC, RoHS Safe Certified.
• ABS shell with car standard provides good cushioning and heat dissipation makes the product last longer and safer.
• Just press the button, the built-in LED indicator can display the remaining power.
• QA warranty replacement battery,Specifically for DJI Mavic Pro series,90 days warranty.

Product description

7.4V/2S 2200mAh 35C LiPO Battery T-PLUG

Item No.: TCB2S2200C35AT



Capacity: 2200mAh

Voltage: 7.4V/2S

Constant Discharge: 35C/77A

Max Burst Discharge: 50C/110A

Size: (about) 105*34*16mm

Weight: (about) 117g

Suggest Charge Rate: <2C/4.4A

JST-XHR plug balance charge

T-plug discharge

Q'TY: 1P



Please Note:

Never exceed the declared limit to discharge or recharge the battery!

We won't offer guarantee for damage caused by improper Storage or Use!



The LiPo cell keep about 3.8V each from factory, and need to charge it to 4.2V before first use.

Never keep the LiPo below 3.7V each cell, otherwise there will cause damage by overdischarge.

A battery BB alarm will be necessary, which can be set cut voltage 3-3.7V.

(battery work voltage lower than idle, set it cut voltage 3.4V, the battery can be back 3.7V when power cut).

Please note: Need special LiPO charger for recharging, otherwise it will cause damage, even explode fire.

Excessive charging will cause damage too, so an intelligent charger with auto-protection will be big help!

Please take care of your battery storage environment (20-25 degrees Celsius will be the best).

When drive out, some LiPo safe bag will be strongly recommended!

• Capacity: 2200mAh
• Voltage: 7.4V/2S
• Constant Discharge: 35C/77A
• T-plug discharge
• Q'TY: 1P

Product description

The Venom AC sport balance charger is a peak detection charger that allows you to quickly and safely charge your lipo, LiHV, life, NiMH, and NiCd battery packs. The charger can charge 4, 5, 6, 7 and 8 cell NiMH and NiCd battery packs and balance charge 2, 3, and 4 cell lipo, LiHV, and life Battery packs at a user selectable Rate of up to 3 amps. The Venom AC sport balance charger includes a built-in power supply, charge status LED and LCD display to show the current percentage of charge. With a simple two button design, charging batteries has never been easier!

• Charge Current: User Selectable 1A / 2A/ 3A
• Cell Count: LiPo/LiFe/Li-ION: 2-4 Series
• Cell Count NiMH/NiCD: 4-8 Cell
• LED Charge Status Indicator
• Backed with Proven US Support and Venom's Industry Leading Limited Lifetime Warranty.

User questions & answers

Question:	Will i be able to charge a tattu 1800mah 75c 3s lipo battery with this charger
Answer:	It doesn't come with traxxas connector but you can get an adator to work and depending on batteries this doesn't charge highvoltage batteries
Question:	will this charge a 5000mAh 40c 7.4v 2s battery
Answer:	You need to select it as the specific battery type; it is separate from the standard lipo setting.
Question:	Can this charge venom 2s 4000mah 7.4v spektrum dx6/7/8 battery? this battery is special that it does not have balance connector
Answer:	Yes, this charger comes with alligator clips to XT-60 so that you can charge using a DC source such as a car battery.
Question:	Does it come with a Traxxas connector
Answer:	Hello Jeff, This charger comes with everything shown plus an AC power cord. It does not come with an AC plug adapter.

Product features

Venom LiPo and NiMH AC Sport Balance Charger

The Venom AC Sport Balance Charger is a peak detection charger that allows you to quickly and safely charge your LiPo, LiHV, LiFe, NiMH, and NiCd battery packs. The charger can charge 4, 5, 6, 7 and 8 cell NiMH and NiCd battery packs and balance charge 2, 3, and 4 cell LiPo, LiHV, and LiFe Battery packs at a user selectable rate of up to 3 amps. The Venom AC Sport Balance Charger includes a built-in power supply, charge status LED and LCD display to show the current percentage of charge. With a simple two button design, charging batteries has never been easier!

Specifications:

Lithium Cell Count: 2-4 Cell.

NiCd/NiMH Cell Count: 4-8 Cell.

Charge Current: 0.5 - 3A (0.5A Increments).

Circuit Power: 20W.

Current Drain Balancing: 300mAh per Cell.

Product description

Features:

True Capacity and C-Rating

Thick 12AWG Discharge Leads

EC3 Discharge Plug

JST-XH Balance connector

Capacity: 3000mAh

Voltage: 3S / 3 Cell / 11.1v

Discharge Rate: 30C Constant (90A) / 60C Burst (10 sec) (180A)

Charge Rate: 2C (6.0A)

Watt Hours: 33.30Wh

Weight: 6.3oz / 181g (including wire & plug)

Dimensions LxWxH: 104.0 x 34.0x 25.5 mmDimensions w/ Wires folded at end of pack: 107.0 x 34.0x 25.5 mm

*Note that dimensions may vary by ± ~1mm.

Discharge Plug: EC3 Connector

Balance Plug: JST-XH

Includes:

11.1V 3000mAh 3S Cell 30C-60C LiPo Battery Pack w/ EC3 Connector

Vant Battery Warranty w/ Lifetime Replacement Plan

Equipment Needed: LiPo Balance charger capable of charging 3 cell LiPo batteries

Equipment Recommended: LiPo Safe Charging Bag/Sack/Pouch, Cell Voltage Reader, Extended Battery Strap if required by your vehicle.

Safety Notes & Warnings:

LiPo batteries are potentially hazardous. Improper usage can cause fire or explosion.

Charge and Store battery in LiPo-Safe Bag away from flammables on a concrete surface.

Charge using a LiPo compatible Balance Charger ONLY!

Never Charge above 4.2V per cell.

Never Discharge below 3.2V per cell.

Always use under adult supervision.

The end-user is fully responsible for any results in using this battery pack.

• Vant Batteries offer an excellent value by providing factory direct pricing and quality that meets or exceeds that of other major battery manufacturers. Vant Batteries go through strict testing and quality control procedures in order to provide extremely accurate mAh, Voltage, and C ratings. Don't let their low cost fool you, these batteries outperform major manufacturers batteries!!
• WARRANTY: Vant Batteries are warranted to be free from defects upon delivery to the customer. They are warranted against failure for a period of 6 Months from the date of purchase. Misuse, abuse, or neglect by customer is not covered in this warranty. After the 6 Month warranty period, the Lifetime Replacement Plan takes effect. Under the Lifetime Replacement Plan, you can send in your battery to receive a replacement for 50% off the RETAIL price of the battery.
• This is an OEM replacement battery that will fit many aircrafts such as the DJI Phantom and Blade Helis and Quadcopters.

User questions & answers

Question:	Will this battery fit E-Flight Timber
Answer:	Yes, according to the specs for the plane, it should fit :-)
Question:	Will this battery work with Blade 350 QX
Answer:	Yes it should fit just fine. We also have a 3500mAh 30C battery available that is pretty much the same dimensions, designed to fit the Blade as well. We don't have them listed on Amazon yet, but plan to in the next day or two.
Question:	why are both vant 3000 and 3500 same size and do you have proper size battery to fit blade 350 QX
Answer:	Usually, the 3000mah battery is smaller. Every time we get a shipment in, we check the sizes of the batteries and update our descriptions. On our last shipment, the size was similar to the 3500mah. Please measure your battery compartment and compare it to the dimensions of the batteries listed in the description. Thank you :-)
Question:	Will this work for the eflite Timber
Answer:	Yes it is, This battery is standard for this kind of planes

Product description

The Z-Block Fire Containment Bag contains fires caused by the Lithium-Ion batteries used to power laptops, smartphones, tablets, and other personal electronic devices (PEDs). Fire containment bags are most commonly used aboard aircraft and in other confined spaces where a Lithium-Ion battery fire is likely to lead to extensive property damage or loss of life. The Z-Block Fire Containment Tote has been tested extensively with live battery fires, and the fire resistant materials used to fabricate the fire containment bag have been tested in accordance with FAA standards. This Fire Containment Tote feature several layers of advanced Z-Block Flame Resistance Fabric, ZetexPlus Vermiculite Coated Fiberglass Fabric, and Z-Flex Aluminized Fabric to ensure that heat and fire remain contained. The kit includes a pair of X20 high temperature gloves and a silica fire blanket. This kit is easy to store, easy to use, and requires minimal training. The Z-Flex X20 high temperature gloves feature an aluminized back and leather palm to protect hands from the extreme heat associated with Lithium-Ion battery fires while providing good grip and dexterity for handling small electronic devices. The Z-Sil Silica fire blanket is designed to knock down flames before the handler attempts to move a burning device. The fire blanket also serves as an additional barrier when moving the device into the fire containment tote.

• Designed with several layers of advanced Z-Block Flame Resistant Fabric, ZetexPlus Vermiculite Coated Fiberglass Fabric, and Z-Flex Aluminized Fabric to contain lithium ion battery fires and explosions
• Kit includes a Z-Sil Silica Fire Blanket and X20 Z-Flex High Temperature Gloves
• Measures 24" x 13" x 5"; flat bottom and 3 dimensional design allows bag to stand upright; two nylon carrying straps; zipper closure
• Materials tested in accordance with FAA standards
• Designed & manufactured in Rochester, NY by Newtex Industries, Inc.