13 best 3m pesticides

Product description

NIOSH approved for protection against certain organic vapors, acid gases, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, or hydrogen fluoride. Use with 3M Half and Full Facepieces 6000, 7000 and FF-400 Series with a bayonet-style filter/cartridge connection or 3M Scott AV-3000 HT and AV-3000 SureSeal facepieceswith 3M Scott AV-632 Bayonet Adapter. Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and User Instructions, or call 3M Personal Safety Division (PSD) Technical Service in the U.S.A. at 1-800-243-4630. In Canada, call 1-800-267-4414. Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, or death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

• NIOSH approved for protection against certain organic vapors, acid gases, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, or hydrogen fluoride
• USE WITH 3M Half and Full Face Pieces 6000, 7000 and FF-400 Series with a bayonet-style filter/cartridge connection or 3M Scott AV-3000 HT and AV-3000 SureSeal facepieces with 3M Scott AV-632 Bayonet Adapter
• SWEPT BACK DESIGN allows an enhanced field of view and increased comfort
• VARIETY OF USES: When properly fitted, use in a variety of applications including assembly and mechanical, batch-charging, change-overs, chemical dispensing, clean-up, cleaning, handling, painting, parts cleaning, pesticide application, powder, and seal coating
• EASY TWIST ON AND OFF: Bayonet connection twist on and off easily for quick assembly and disassembly with many 3M half and full facepiece designs.
• For industrial/occupational use only. Not for consumer sale or use.

User questions & answers

Question:	Are these rated P
Answer:	First, you need an removable power bank, put it into connect it with the inner usb charger port, then connect your smartphone with the out charger port, it is done.
Question:	have you found goggles that work well with this mask? I have and like this mask, but am having trouble getting my various goggles to fit snug. thanks
Answer:	China
Question:	Does this mask protect against vapors of hydrochloric and/or nitric acid
Answer:	yes , it can place a mini lunch bag inside. and please one pair shoes , wish you love it .
Question:	Will these work with 3m rugged comfort half facepiece reusable respirator
Answer:	So far it is very durable, very good quality. Very satisfied would definitely buy again.

Product features

3M Organic Vapor/Acid Gas Cartridge 6003/07047(AAD)

• Swept-back design allows an enhanced field of view and comfort
• Bayonet compatibility allows use with many 3M half and full facepiece designs
• Wide range of applications reduces inventory needs
• Simple installation and usage requirements reduce training needs

The 3M Organic Vapor/Acid Gas Cartridge 6003 helps provide respiratory protection against certain organic vapors or acid gases. Use with 3M Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders.

Product description

Respiratory Protection Large 5303 12 Per Case Respirator Assembly Half Facepiece Disposable Organic Vapor/Acid Gas

User questions & answers

Question:	Will this protect from dog and cat feces ammonia while cleaning up an apartment
Answer:	It should fit just about any vehicle, I believe.
Question:	is this one single mask or a case of
Answer:	They clip on, so a screwdriver can pry them up.
Question:	Will this work for herbicides
Answer:	That unsure I have a suv VW Tiguan
Question:	Will this filter radon
Answer:	That unsure I have a 2019 VW Tiguan suv

Product description

Half Facepiece Paint Spray/pesticide Respirator, Large

• 3M Half Face Respirator,Spray/Pesticide,Reusable,Large,Gray

User questions & answers

Question:	does it come with cartridge and filters
Answer:	FOR USE WITH 6000,7000 Series Half, Full Facepiece Respirators, FF-400 Series

Product description

NIOSH approved against certain organic vapors and non-oil and oil particulates. Use with 3M Half and Full Facepieces 6000, 7000 and FF-400 Series with a bayonet-style filter/cartridge connection or 3M Scott AV-3000 HT and AV-3000 SureSeal facepieces with 3M Scott AV-632 Bayonet Adapter. Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and User Instructions, or call 3M Personal Safety Division (PSD) Technical Service in the U.S.A. at 1-800-243-4630. In Canada, call 1-800-267-4414. Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, or death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

• NIOSH approved against certain organic vapors and non-oil and oil particulates
• USE WITH 3M Half and Full Face Pieces 6000, 7000 and FF-400 Series with a bayonet-style filter/cartridge connection or 3M Scott AV-3000 HT and AV-3000 SureSeal facepieces with 3M Scott AV-632 Bayonet Adapter
• SWEPT BACK DESIGN allows an enhanced field of view and increased comfort
• VARIETY OF USES: When properly fitted, use in a variety of applications including chemical clean-up, compounding, and transfer; laboratories; and pesticide applications as well as in the following industries: agriculture, chemicals, mining, oil and gas, pharmaceuticals, and primary metals.
• EASY TWIST ON AND OFF: Bayonet connection twist on and off easily for quick assembly and disassembly with many 3M half and full facepiece designs.
• For industrial/occupational use only. Not for consumer sale or use.
• Combined Organic vapor cartridge with P100 particulate filter

User questions & answers

Question:	Change out time is 30 days or 40 hours of use, and i opened my filters about 30 days ago but i have barley used them for an hour. do i need to change
Answer:	I change them as needed. I use mine infrequently as well, so change filters when I start feeling they are not effective anymore. Mine have lasted much longer than 30 days/40 hours.
Question:	How can i order another set of these for my husband's mask who is working directly with c-19 patients daily? he is wearing his own ppe
Answer:	If you can't get them here, try going directly to 3M. These things are twice as effective as ANY N95 mask. Good luck.
Question:	Will this filter out the hydrogen carboxylic acid, common name: formic acid, that is used in mite-away quick strips for bee hive mite treatment
Answer:	Thanks for your question. In the 3M Respirator Selection Guide (www.3M.com/respiratorselector) we suggest that either an acid gas cartridge (6002/60922) or a formaldehyde cartridge (6005/60925) may work better (longer service life) than the organic vapor cartridge (6001/60921) for filtering formic acid. Thanks!
Question:	Can these filters be washed in water without degrading their capability
Answer:	Absolutely not. The filters' main use is for filtering out organic compounds. This is achieved my means of activated carbon. The activated carbon will not work if made wet. For reference, I am able to use them pretty heavily for painting for about three months.

Product features

3M Organic Vapor Cartridge/Filter 60921

The 3M Organic Vapor Cartridge/Filter 60921 P100 helps provide protection against certain organic vapors and particulates in a variety of environments. The cartridge/filter combination may be used for respiratory protection from certain organic vapors and non-oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half face respirators or 50 times PEL with quantitatively fit tested full face respirators. This cartridge/filter is not for use in environments that are immediately dangerous to life or health (IDLH). Recommended applications for the cartridge/filter include chemical clean-up, chemical compounding, chemical transfer, laboratories, and pesticides application.

FEATURES:

• NIOSH approved for protection against certain organic vapors and particulates
• Swept-back design allows an enhanced field of view and comfort
• Bayonet compatibility allows use with many 3M half and full face respirator designs

Product description

The 3M Rugged Comfort 6500 Series Half Facepiece Reusable Respirator is designed to help promote comfort, durability, and stability with a firm, lightly textured silicone faceseal and strong body construction.

• Resilient silicone faceseal helps provide comfort, durability, and stability with a soft but firm seal
• Proprietary Cool Flow valve helps reduce heat and moisture
• Exhalation valve cover helps direct exhaled breath and moisture downward to reduce fogging of eyewear and grinding and welding shields
• Low profile half facepiece design offers a wider field of view and better compatibility with welding and grinding shields
• Adjustable head harness assembly offers improved fit and comfort

User questions & answers

Question:	Does this fit the 60923 cartridge by 3M
Answer:	The 3M phone number for proper use is 1-800-243-4630 in USA and 1-800-267-4414 in Canada.
Question:	Does this model have a quick latch? Some reviews do mention it, but it not in the description
Answer:	The product description states "Combined Organic vapor cartridge with P100 particulate filter." I don't own these, but that sure looks like a P100 rated filter.
Question:	does it block cig smoke
Answer:	Get the full face mask, "3M Full Facepiece Reusable Respirator 6700, Respiratory Protection" that should fit your needs.
Question:	Does this come with the filter or do I need to buy separately
Answer:	I needed a mask that filters gasoline vapors. I contacted the 3m customer helpline, they advised this filter for my mask. It worked so well I did not smell or sense the fumes in any manner. I recommend you call 3m customer helpline to receive appropriate advise.

Product features

3M Rugged Comfort Half Facepiece Reusable Respirator 6503/49491, Large

• Resilient silicone faceseal helps provide comfort, durability, and stability with a soft but firm seal
• Proprietary Cool Flow valve helps reduce heat and moisture
• Exhalation valve cover helps direct exhaled breath and moisture downward to reduce fogging of eyewear and grinding and welding shields
• Low profile half facepiece design offers a wider field of view and better compatibility with welding and grinding shields
• Adjustable head harness assembly offers improved fit and comfort

The 3M Rugged Comfort 6500 Series Half Facepiece Reusable Respirator is designed to help promote comfort, durability, and stability with a firm, lightly textured silicone faceseal and strong body construction.

Product description

NIOSH approved against certain organic vapors and particulates. Use for a variety of applications including spray painting, pesticides, agriculture, construction and transportation.

• NIOSH approved for respiratory protection against certain organic vapors and particulates
• Lightweight well-balanced design enhances comfort
• Disposable model helps reduce maintenance issues for greater convenience
• Multi-purpose respirator assembly works in a variety of workplace applications
• Half facepiece design is ideal for intermittent use

User questions & answers

Question:	does it come with filters are will i have to buy
Answer:	It will protect you from the ammonia and feces odor
Question:	What kind of filter is needed
Answer:	I purchased a single mask.
Question:	Does this product work to tear gas
Answer:	Yes, I have been using ours for insecticides and can’t smell the odors.

Product description

NIOSH approved for protection against certain organic vapors, acid gases, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, or hydrogen fluoride. Use with 3M Half and Full Facepieces 6000, 7000 and FF-400 Series with a bayonet-style filter/cartridge connection or 3M Scott AV-3000 HT and AV-3000 SureSeal facepieceswith 3M Scott AV-632 Bayonet Adapter. Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and User Instructions, or call 3M Personal Safety Division (PSD) Technical Service in the U.S.A. at 1-800-243-4630. In Canada, call 1-800-267-4414. Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, or death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

From the Manufacturer

The 3M™ Multi Gas/Vapor Cartridge/Filter 60926 P100 may be used for respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, ammonia, methylamine, formaldehyde, or hydrogen fluoride, and non-oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepiece masks. This cartridge/filter is not for use in environments that are immediately dangerous to life or health (IDLH). Recommended applications for the cartridge/filter include petrochemical and chemical processing. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge/filter is commonly used in the following industries: utilities, pharmaceuticals, mining, and primary metals.

This multi gas/vapor cartridge/filter combination works with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet attachment holders. The cartridge/filter is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain organic vapors, acid gases, ammonia, methylamine, formaldehyde and non-oil and oil particulates. The cartridge/filter has been assigned the color code “Magenta/ Olive” in the NIOSH system.

Breathing organic vapors, acid gases, ammonia, methylamine, formaldehyde and particulates can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M™ Multi Gas Vapor Cartridge 60926 to help reduce exposure to certain organic vapors, acid gases, ammonia, methylamine, formaldehyde and particulates.

For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Personal Safety products, focused on worker safety, include respirators, hearing protection, air and noise-monitoring devices, eyewear, hard hats, welding shields, coveralls, fall protection, reflective material, and comprehensive training programs. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

• Cartridge or Filter Type Cartridge / Filter Combo
• Gas & Vapor Protection Type: Organic Vapor/Acid Gas/Ammonia/Methylamine/Formaldehyde
• NIOSH Cartridge or Filter Assigned Color Coding: Magenta/Olive

User questions & answers

Question:	Why are they pink
Answer:	No. The quick latch would be #6503QL. Thank you for considering 3M products.
Question:	Would this work with cigarette smoke. I cant get a family member to quit and I don't want to breathe their carcinogenic smoke
Answer:	Blocks cigarettes sent the same way it blocks the occasional passing of gas. ...not well.
Question:	Can the filter be cleaned and reused
Answer:	Need to buy seperate
Question:	Will protect me against the zombie apocalypse
Answer:	Yes

Product features

3M Multi Gas/Vapor Cartridge

• Swept-back design allows an enhanced field of view and comfort
• Bayonet compatibility allows use with many 3M half and full facepiece designs
• Wide range of applications reduces inventory needs
• Simple installation and usage requirements reduce training needs

This multi gas/vapor cartridge/filter combination works with 3M Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet attachment holders. The cartridge/filter has been assigned the color code 'Magenta/ Olive' in the NIOSH system.

Product description

The 3M Half Facepiece Reusable Respirator 6000 Series helps provide protection against particulates and a wide variety of gases and vapors when used with approved cartridges and filters. When properly fitted and used with approved 3M cartridges and filters, this respirator can help provide protection at concentrations up to 10 times the Permissible Exposure Limit (PEL). The swept back design of the cartridges helps improve balance and visibility. Remarkably comfortable, soft, lightweight facepiece has easy-to-adjust head straps that allow for a customized fit to the user. Replaceable cartridges help reduce waste and costs over time. NIOSH, a Federal government regulatory agency, has tested and approved the 6000 Series Half Facepiece with certain 3M cartridges, filters and supplied air systems. The 6000 Series is NIOSH approved for negative-pressure air purifying and positive-pressure dual airline applications. This half facepiece respirator may be used with 3M Cartridge 6000 Series; 3M Filters 2000, 2200, 7000 or 5000 Series; or 3M Dual Airline Systems against a variety of gases, vapors, and particulate hazards according to NIOSH approvals. Some applications include: assembly and mechanical, chemical clean-up, chemical handling, chipping, chiseling, cleaning, furnace operations, grinding, laboratories, machining, masonry, painting, pouring/casting, sanding, sawing, welding, construction, general manufacturing, industrial maintenance, mining, etc. Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M Half Facepiece Reusable Respirator 6000 Series helps reduce exposure to many contaminants.Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death.Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

• Comfortable: Soft, Lightweight face piece with easy to adjust head straps for a customized fit
• Durable and Reusable: Respirator can be disassembled, cleaned, and reused; Supplied with reclosable storage bag
• Helps reduce exposure to particulates and a wide variety of gases and vapors when used with approved cartridges and filters
• Use With Other Ppe: Adjustment points located on face piece for improved compatibility with other personal protection equipment
• Applications: Chemical Handling, Chipping, Chiseling, Cleaning, Grinding, Machining, Masonry, Painting, Sanding, Sawing, Welding, Construction, General Manufacturing, Industrial Maintenance
• Compatible: Bayonet connection is compatible with all 3M Bayonet style cartridges and filters
• NIOSH approved for negative pressure air purifying and supplied air dual airline applications
• For industrial/occupational use only; Not for consumer sale or use

User questions & answers

Question:	What kind of filters do you need to have if using in asbestos....thank you
Answer:	yes,it has 2 carbon cartridges
Question:	Is this disposeable
Answer:	The mask will filter air to protect against masonry materials and moisture laden materials. should be fine for you needs but make sure you replace filters when they appear dirty
Question:	I am a 5'3" adult female getting prepared to fix rust on my Subaru... 1- will this withstand all the paint, fiberglass and toxins and 2- is a small su
Answer:	Yes
Question:	Will this protect me from Ebola
Answer:	Yes, it has a good filter cartridge that should protect well against mold and chemicals

Product features

Step 1

Place the respirator over your nose and mouth with bottom straps unfastened.

Step 2

Pull the top strap over your head, placing the head cradle on the crown of your head.

Step 3

Hook the bottom straps together behind your neck.

Step 4

Adjust strap tension to achieve a secure fit. Pull the ends of the straps to adjust the tightness beginning with the adjustment points at the top of the respirator and then moving to the adjustment points at the back of the neck. Do not over-tighten. Strap tension may be decreased by pushing out on back side of buckles.

Using Particulate Filters

Place your thumbs over the center of the filters and inhale gently. The facepiece should collapse slightly. If air leaks between the face and the faceseal of the respirator, reposition it and adjust the straps for a more secure seal.

Using Cartridges

Place the palms of your hands over the cartridges and inhale gently. The facepiece should collapse slightly. If air leaks between the face and the faceseal of the respirator, reposition it and adjust the straps for a more secure seal.

Using Hard Case Particulate Filters

Squeeze filter covers with hands toward facepiece to restrict airflow. Be careful not to disturb the position of the respirator. Inhale gently. The facepiece should collapse slightly. If air leaks between the face and the faceseal, reposition it and adjust the straps for a tighter seal.

Product description

The 3M Mold Remediation Respirator Kit 68097 includes one medium sized 3M Full Face piece Reusable Respirator 6800 plus 2 pair (4 total) 3M Particulate Filters 2097. The 3M Particulate Filter 2097, P100, helps provide respiratory protection against exposure to mold, lead, asbestos, cadmium, arsenic, and MDA (methylenedianiline). This filter helps protect against a wide range of oil and non-oil based particulate contaminants. The filter also offers nuisance level odor relief from organic vapors that are below the PEL. The 3M Full Face piece Reusable Respirator 6000 Series is a lightweight, well-balanced, full face respirator design with silicone face seal for enhanced comfort and durability. The 3M Cool Flow Valve helps make breathing easier. NIOSH, a Federal government regulatory agency, has tested and approved the 3M Full Face piece Reusable Respirator 6000 Series with 3M cartridges, filters or PAPR and supplied air systems to help reduce breathing certain airborne contaminants. The 3M Full Face piece Reusable Respirator 6000 Series face piece also meets the impact requirements of the ANSI Z87. 1-2010 standard, high impact level for face and eye protection. Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U. S. , a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910. 134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94. 4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and User Instructions, or call 3M Personal Safety Division (PSD) Technical Service in the U. S. A. at 1-800-243-4630. In Canada, call 1-800-267-4414. Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e. g. , for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e. g. , U. S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

• Kit Includes: One 3M Full Face piece Reusable Respirator 6800, medium size, plus 2 pair (4 total) 3M Particulate Filters 2097 with 99. 97% filter efficiency meeting NIOSH P100-series test criteria.
• Respiratory Protection: 3M Filter 2097 helps protect against many oil and non-oil particulate contaminants and nuisance level odor from organic vapors such as mold, dust, lead, asbestos, cadmium, arsenic, and MDA.
• Enhanced Comfort: Lightweight, well-balanced, full face respirator design and silicone face seal for enhanced comfort and durability.
• Breathe Easier: 3M Cool Flow Valve helps provide cool, dry comfort; and the unique center adapter directs exhaled breath and moisture downward.
• Large Lens: Provides a wide field of view for excellent visibility. Integrated optical correction limits distortion as you look from left to right.
• Easy Cleaning: Smooth surface allows for quick and easy cleaning of the respirator.
• ANSI Requirement: Respirator meets requirements of ANSI Z87. 1-2010 for high impact (Z87+).
• For industrial/occupational use only. Not for consumer sale or use.

User questions & answers

Question:	Is this respirator latex and silicone free
Answer:	The filters included are a n95 filter and an organic vapor(Carbon filter). These are not replaceable.
Question:	What is the return policy? Can't decide on medium or large size
Answer:	3M's 5P71 The box will read 5P71/07194 I would recommend you get it from Gempler's. When I ordered it from Amazon it came from China and wasn't the correct filter with fit or the properties that I needed.
Question:	Will moldex p100 filters fit onto this mask? I'd rather not pay for weekly swap outs if the filters given to me at work can fit this mask instead
Answer:	You kidding me right?!
Question:	i need a facemask to rip up some carpet. i need mold and dust protection. is this a good choice
Answer:	Yes.

Product features

Step 1

Fully loosen all four head straps. Pull hair back with one hand. Bring facepiece up to face with other hand.

Step 2

While holding the facepiece in place, pull the straps over your head.

Step 3

Tighten the two bottom straps and then tighten the two top straps.

Step 4

Make sure the back of the harness is centered on the back of the head.

Positive Pressure User Seal Check

Place the palm of your hand over the opening in the exhalation valve cover and exhale gently. If facepiece bulges slightly and no air leaks are detected between the face and the facepiece, a proper seal has been obtained. If faceseal air leakage is detected, reposition the respirator on your face and/or readjust the tension of the straps to eliminate leakage and recheck seal. If you cannot achieve a proper seal, DO NOT enter the contaminated area. See your supervisor.

Negative Pressure User Seal Check Using Particulate Filters

Place your thumbs onto the center portion of the filters, restricting airflow through filters and inhale gently. If you feel facepiece collapse slightly and pull closer to your face with no leaks between the face and the facepiece, a proper seal has been obtained. If faceseal air leakage is detected, reposition the respirator on your face and/or readjust the tension of the straps to eliminate leakage and recheck seal. If you cannot achieve a proper seal, DO NOT enter the contaminated area. See your supervisor.

Negative Pressure User Seal Check Using Cartridges

Place palms of hands to cover face of cartridge or open area of 3M Filter Retainer 501 and inhale gently. If you feel facepiece collapse slightly and pull closer to your face with no leaks between the face and facepiece, a proper seal has been obtained. If faceseal air leakage is detected, reposition the respirator on your face and/or readjust the tension of the straps to eliminate leakage and recheck seal. If you cannot achieve a proper seal, DO NOT enter the contaminated area. See your supervisor.

Product description

Half Facepiece Paint Spray/Pesticide Respirator Medium

User questions & answers

Question:	What filters does this use
Answer:	Don't buy, They arrived late when promised and we missed our work deadline. No returns given to this product.
Question:	Can you soak facepiece (excluding filters and cartridges) in dawn dish soap and water
Answer:	Unless he is Andre the giant large he should be fine.
Question:	Is this item equipped with 6001 cartridge plus adapter and N95 filter? It seems like that in the photos
Answer:	Yes, but you need to first remove the grey adapters to use the bayonet ports, which are designed for 3M filters. Easy if you are handy. If not, ask a handy friend to help.
Question:	Is this respirator suitable for high dust intake? I do masonry, just wondering
Answer:	Box says made in China

Product description

This full facepiece reusable respirator offers lightweight comfort and ease of use. Combine with appropriate 3M particulate filters or cartridges to help provide respiratory protection against particulates or a variety of gases and vapors. The 3M Full Facepiece Reusable Respirator 6000 Series helps provide protection against certain airborne contaminants. Versatile—use with 3M particulate filters, gas/vapor cartridges and supplied air respirator systems. The 3M Cool Flow Valve helps make breathing easier. These features combine to make a comfortable, practical and economical solution. Recommended applications include assembly, chemical clean-up, chemical handling, chemical splash, chipping, chiseling, cleaning, furnace operations, grinding, laboratories, machining, masonry, painting, pouring/casting, sanding, and sawing. Industries in which this full face respirator are commonly used include agriculture, construction, general manufacturing, pharmaceuticals, and primary metals. NIOSH, a Federal government regulatory agency, has tested and approved the 3M Full Facepiece Reusable Respirator 6000 Series with 3M cartridges, filters or PAPR and supplied air systems to help reduce breathing certain airborne contaminants. The 3M Full Facepiece Reusable Respirator 6000 Series facepiece also meets the impact requirements of the ANSI Z87.1-2010 standard, high impact level for face and eye protection. The facepiece works with these approved 3M filters and accessories: 2071, 2076HF, 2078, 2091/07000, 2096, 2097/07184, 2291, 2296, 2297, 7093, 7093C/37173, 603, 5N11, 5P71/07194, 501, and 502. It also works with the following 3M Cartridges 6000 Series: 6001, 6001i, 6002, 6003, 6004, 6005, 6006, 6009, 60921, 60921i, 60922, 60923, 60924, 60925, 60926, 60928, and 60929S. Breathing hazardous particles, gases and vapors can be harmful to your health. With proper fit, use, and the appropriate cartridge/filter, the 3M Full Facepiece Reusable Respirator 6000 Series helps reduce exposure to many contaminants (i.e., dust, mists, fumes, mold, bacteria, paints, acids, ammonia, chlorine, other chemicals, etc.). Enhanced comfort and visibility features make wearing the respirator noticeably more enjoyable. Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death.

• Enhanced Comfort: Lightweight, Well Balanced, Full Face Respirator Design and Silicone Face Seal for Enhanced Comfort and Durability
• Breathe Easier: 3M Cool Flow Valve Helps Provide Cool, Dry Comfort
• Directs Exhaled Breath Downward: Unique Center Adapter Directs Exhaled Breath and Moisture Downward
• Large Lens: Provides a Wide Field of View for Excellent Visibility; Integrated Optical Correction Limits Distortion As You Look From Left to Right
• Easy Cleaning: Smooth Surface Allows for Quick and Easy Cleaning
• Meets requirements of ANSI Z87.1 2010 for high impact (Z87+)
• Combine with 3M particulate filters or chemical cartridges to help provide respiratory protection against particulates (dust, fumes, mold, etc) and gases and vapors (paint, acid, chemicals, etc.)
• For industrial/occupational use only; Not for consumer sale or use

User questions & answers

Question:	Which filters do I need to buy for this mask
Answer:	From the 3M Cartridge Filter Guide and Brochure: "Why are the filters and cartridges 'pink'? When a filter or cartridge has the magenta color code it has the P100 designation. This color provides uniformity and easy identification."
Question:	I need to crawl around in a dark environment with this and can't hold a flashlight while I'm doing it. Suggestions on a headlamp that will work
Answer:	Short Answer: 3M N100 Mask filters out 99.97% of particles larger than 0.3-Microns (PM2.5 means 2.5-microns or larger). A 3M N100 Mask works well against cigarette smoke and smog covered cities. Longer Answer: Your concern is with PM2.5. See explanation below: The most harmful pollutant to human health is called PM 2.5, particle matter smaller than 2.5 microns in diameter that's found in soot, smoke, and dust. PM 2.5 is especially dangerous because it can get lodged in the lungs and cause long-term health problems like asthma and chronic lung disease. PM 2.5 starts to become a major health problem when there is more than 35.5 micrograms (µg) of PM 2.5 per cubic meter of air, according to the Environmental Protection Agency. But the World Health Organizations recommends keeping yearly average PM 2.5 levels three times lower than that. The most polluted cities on Earth have anywhere between 11 and 20 times that amount - based on the new WHO data from cities that collect it. Top 15 Cities in the world with unclean air: https://www.google.com/amp/s/amp.businessinsider.com/the-cities-with-the-worlds-worst-air-pollution-who-2016-5 3M Respirator Selection Help: https://www.3m.com/3M/en_US/safety-centers-of-expertise-us/respiratory-protection/respirator-selection/ 3M Half/Full Respiratory Guide: https://www.3m.com/3M/en_US/company-us/all-3m-products/~/All-3M-Products/Personal-Protective-Equipment/Reusable-Respirators/?N=5002385+8711017+8720539+8720550+3294857497&rt=r3 3M Disposable Respirator Guide: https://www.3m.com/3M/en_US/company-us/all-3m-products/~/All-3M-Products/Personal-Protective-Equipment/Disposable-Respirators/?N=5002385+8711017+8720539+8720542+3294857497&rt=r3 Sincerely, Jacob My YouTube Channel: SurvivalGeek 11-02-2017
Question:	What full face respirator works best with glasses
Answer:	Yes and no. The filter contains 2 elements...the chemical filter cartridge, and the P100 particle filter material. For the chemical cartridge, it will eventually lose it's ability to filter hazardous chemicals...after 3 years from the manufacture date, after maybe a few weeks upon breaking the package seal ( depending on storage environment), after 8 hours of exposure to chemicals ( depending on chemical type and concentration). Bottom line is it cannot be "reused" to filter hazardous chemicals after it ceases doing so effectively. The particle filter actually increases in effectiveness as it becomes loaded with particles. The point at which the particle filter must be replaced is when it becomes difficult to breath through, or when it is contaminated with a hazardous substance and cannot be decontaminated. If using to filter pathogens, the particle filter can be disinfected with hydrogen peroxide (3%-7% H2O2 1 min or more contact time) and used until breathing becomes difficult. Spray with H2O2 until wet and keep wet for at least 1 minute, and allow to dry fully before using again. Just note, it will no longer filter hazardous chemicals and can be used to filter particles only, and should be marked as such. If the contaminant is a hazardous substance like asbestos, lead or a chemical, discard the filter using appropriate HAZMAT protocols after 1 use.
Question:	Does this mask protect you from airborne viruses such as Ebola
Answer:	No, this will not protect you against a zombie apocalypse as zombies are not created through airborne particles. You need a different kind of protection that would protect you from bites, scrapes, etc... it might help if you smashed a zombie in the head with the filter but there are many other tools to help you in those situations. I HIGHLY recommend this kit from Gerber for better protection: http://www.gerbergear.com/Apocalypse/Gear/Apocalypse-Kit_30-000601Good luck, and remember... don't stare at the flowers. ;)

Product features

Step 1

Fully loosen all four head straps. Pull hair back with one hand. Bring facepiece up to face with other hand.

Step 2

While holding the facepiece in place, pull the straps over your head.

Step 3

Tighten the two bottom straps and then tighten the two top straps.

Step 4

Make sure the back of the harness is centered on the back of the head.

Positive Pressure User Seal Check

Place the palm of your hand over the opening in the exhalation valve cover and exhale gently. If facepiece bulges slightly and no air leaks are detected between the face and the facepiece, a proper seal has been obtained. If faceseal air leakage is detected, reposition the respirator on your face and/or readjust the tension of the straps to eliminate leakage and recheck seal. If you cannot achieve a proper seal, DO NOT enter the contaminated area. See your supervisor.

Negative Pressure User Seal Check Using Particulate Filters

Place your thumbs onto the center portion of the filters, restricting airflow through filters and inhale gently. If you feel facepiece collapse slightly and pull closer to your face with no leaks between the face and the facepiece, a proper seal has been obtained. If faceseal air leakage is detected, reposition the respirator on your face and/or readjust the tension of the straps to eliminate leakage and recheck seal. If you cannot achieve a proper seal, DO NOT enter the contaminated area. See your supervisor.

Negative Pressure User Seal Check Using Cartridges

Place palms of hands to cover face of cartridge or open area of 3M Filter Retainer 501 and inhale gently. If you feel facepiece collapse slightly and pull closer to your face with no leaks between the face and facepiece, a proper seal has been obtained. If faceseal air leakage is detected, reposition the respirator on your face and/or readjust the tension of the straps to eliminate leakage and recheck seal. If you cannot achieve a proper seal, DO NOT enter the contaminated area. See your supervisor.

Product description

The 3M Particulate Filter 5N11, N95 is NIOSH approved for environments containing certain non-oil based particles. When properly fitted, use with appropriate cartridges for various applications including spray painting, petrochemical and chemical manufacturing, and pesticide spraying. The filter helps protect against: 1) solids such as those from processing minerals, coal, iron ore, cotton, flour, and certain other substances; 2) liquid or non-oil based particles from sprays that do not emit harmful vapors; and 3) metal fumes produced from welding, brazing, cutting, and other operations involving heating of metals. The filter works with 3M Respirators 5000 Series or 3M Cartridges 6000 Series or 3M Filter Adapter 603, and 3M Filter Retainer 501. Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and User Instructions, or call 3M Personal Safety Division (PSD) Technical Service in the U.S.A. at 1-800-243-4630. In Canada, call 1-800-267-4414. Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

• NIOSH Approved for environments containing certain non-oil-based particles.
• Use with 3M 5000 Series Respirators or 3M Gas and Vapor Cartridges 6000 Series which are approved for use with 3M Half Facepiece 6000, 6500 and 7500 Series or 3M Full Facepiece 6000, FF-400 or 7800S Series.
• Reduce exposure to particulates when used with 3M Half Facepiece 6000, 6500 and 7500 Series or 3M Full Facepiece 6000, FF-400 or 7800S Series with 3M 603 Filter Holder and 3M 501 Retainer.
• Used for certain solids such as those from processing minerals, coal, iron ore, cotton, flour, and also liquid or non-oil-based particles from sprays or certain fumes from metal heating.
• Applications include: Spray painting, lacquering, petrochemical manufacturing, chemical manufacturing, paper processing, boat manufacturing, lab settings, non-oil pesticide spraying, and agriculture.
• Low profile and lightweight design for improved comfort and worker acceptance
• For industrial/occupational use only. Not for consumer sale or use.

User questions & answers

Question:	How many filters come with this purchase
Answer:	Please contact 3M directly. https://www.3m.com/3M/en_US/worker-health-safety-us/
Question:	can I use the mask without a repirator
Answer:	Contact the seller directly
Question:	Are these n95 masks made in the us or china
Answer:	2 sets of P100 filters come with the mask they work fine
Question:	Is the product quality good
Answer:	This is a great choice for any protection. The filter cartridges come in many types, do research and buy exactly the one you need. For mold and dust the P100 that comes with this mask is more than adequate . I would not go below P95 with possible mold. Remember the face mask needs to seal on face, a close shave is a must. No face mask woks over a beard.

Product features

3M Respirator Filter

• Use with 3M 5000 Series Respirators or 3M Gas and Vapor Cartridges 6000 Series which are approved for use with 3M Half Facepiece 6000, 6500 and 7500 Series or 3M Full Facepiece 6000, FF-400 or 7800S Series.
• Reduce exposure to particulates when used with 3M Half Facepiece 6000, 6500 and 7500 Series or 3M Full Facepiece 6000, FF-400 or 7800S Series with 3M 603 Filter Holder and 3M 501 Retainer.
• Low profile and lightweight design for improved comfort and worker acceptance

Product description

The 3M Rugged Comfort Quick Latch Half Facepiece Reusable Respirator 6500 Series helps provide workers with respiratory protection in harsh, dirty work environments against airborne contaminants when used with approved 3M cartridges and filters. This facepiece combines comfort, durability, and stability with a firm, lightly textured silicone faceseal and strong body construction. The proprietary quick latch design offers an easy, one-hand touch drop-down mechanism for putting the facepiece on and taking it off while moving in and out of contaminated areas. The quick latch also eliminates the need to remove a hardhat or faceshield when lowering or raising the respirator. When properly fitted and used with approved 3M cartridges and filters, this respirator helps provide respiratory protection in workplaces at concentrations up to 10 times the Permissible Exposure Limit (PEL). While being the lightest silicone 3M half facepiece, it is still rugged enough to withstand long hours and extreme conditions. The resilient silicone faceseal offers an extended facepiece life, even keeping its shape in high-heat environments. Innovative design features include a valve cover that helps to direct exhaled breath and moisture downward and 3M’s proprietary Cool Flow Valve that helps to make breathing easier. Made to fit securely and comfortably on the head, the facepiece comes with an adjustable head harness assembly featuring long-lasting polyester/spandex straps that stretch and conform to the individual who wears the respirator. This facepiece is compatible with all 3M bayonet-style filters and cartridges to help provide respiratory protection against a variety of gases, vapors, and particulate hazards (i.e., dust, paint aerosols, etc.) according to NIOSH approvals. This filter compatibility helps to make the respirator highly versatile for many workplace environments and a variety of jobs where respiratory protection is required. Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. Compatible With: Line Compressed Air System SA Series.

• Easy on and Off: Quick latch design offers an easy, 1 hand touch drop down mechanism for putting the face piece on and off while moving in and out of contaminated areas
• Comfortable: Adjustable head harness assembly promotes a comfortable fit with three size adjustable head cradle; Long lasting polyester/spandex straps
• Cool Comfort: Proprietary 3M cool flow valve is designed for easy exhalation to help keep the wearer more comfortable
• Durable: Resilient silicone faceseal provides comfort, durability, and stability with a soft but firm seal. Keeps its shape in high heat environments
• Low Profile: Half face piece design offers a wide field of view and compatibility with welding and grinding shields
• Reduces Fogging: Exhalation valve cover directs exhaled breath and moisture downward to reduce fogging of face shields
• Compatible: Bayonet connection is compatible with all 3M bayonet style cartridges and filters
• For industrial/occupational use only; Not for consumer sale or use

User questions & answers

Question:	What's the difference between the 6500QL series & the 7500 series?? It can't only be the "quick release" because the 7500 can be made to do that. Thx
Answer:	It depends on what you're doing - I got this filter because it seems to be pretty all-encompassing: http://www.amazon.com/3M-Low-Maintenance-Cartridge-Purifying-Respirator/dp/B00AEFCP0E/ref=sr_1_1?s=industrial&ie=UTF8&qid=1392297594&sr=1-1&keywords=6006+filterIt's been effecticve for fiberglass insulation, sanding plastics and composites, spray painting, etc.
Question:	Does this mask include a set of filters
Answer:	The 3AAA eLED® Vizion™ Headlamp from Underwater Kinetics works awesome...no pivot point to wear out and break, had mine for 4 years now...still going strong. The led light module is even removable...to use like a camping light.
Question:	Does anyone have experience with/ know what filter(s) I should buy to go with this mask for sanding wood and old paint and spraypainting
Answer:	This seals fairly well around my glasses. They are very large and still have no trouble fitting into the mask. The mask seals fairly well over the stems, but I do have wire frame glasses so the frames atr only 0.04 in (1mm) thick. Also I wear the "3M Peltor Over the Head Earmuff" which pushes the frame against my skin.
Question:	I want vacuum packaging
Answer:	from what Ive seen from 3ms website, it looks like particulate filters are used for biological with the minimum being something like the 3M 2091 P100 Particulate Filter. Some of the cartridge filters appear to also have a particulate ability and p100 rating, but Im still figuring this all out.In regards to ebola and respiratory protection follow the link below, or if you dont like clicking on links, then just google "Personal Protective Equipment (PPE) for Ebola virus disease (EVD)" You will see the link to 3m's pdf filehttp://multimedia.3m.com/mws/mediawebserver?66666UgxGCuNyVs658T_OxM6EVtQEcuZgVs6EVs6E666666--

Product features

Step 1

Place the respirator over the mouth and nose, with bottom straps unfastened. Place the top strap over your head, placing the head cradle on the crown of your head.

Step 2

Grasp the straps, place them at the back of the neck and hook them together.

Step 3

Adjust strap tension by pulling ends until a secure fit is obtained. Balance strap tension by adjusting the top and bottom strap buckles. Do not overtighten.

Positive Pressure User Seal Check

Cover the opening in the exhalation valve cover with your hand. Be careful not to disturb the position of the respirator. Exhale gently. If the facepiece bulges slightly and no air leaks are detected between your face and the facepiece, a proper seal has been obtained.*

*If faceseal air leakage is detected, reposition the respirator on your face and/or readjust tension of the straps to eliminate the leakage. If you cannot achieve a proper seal, do not enter contaminated area. See your supervisor.

Negative Pressure User Seal Check

Using hands, press or squeeze filter covers toward facepiece to restrict airflow. Be careful not to disturb the position of the respirator. Inhale gently. If you feel the facepiece collapse slightly and pull closer to your face with no leaks between your face and the facepiece, a proper seal has been obtained.*

Using 3M Cartridges

Place the palms of your hands over the cartridges and inhale gently. The facepiece should collapse slightly. If air leaks between the face and the faceseal of the respirator, reposition it and adjust the straps for a tighter seal. If you cannot achieve a proper seal, do not enter the contaminated area. See your supervisor.*

Using 3M Particulate Filters

Place your thumbs onto the center portion of the filters, restricting airflow into the respirator tube of the filters. Be careful not to disturb the position of the respirator. Inhale gently. If you feel the facepiece collapse slightly and pull closer to your face with no leaks between your face and the facepiece, a proper seal has been obtained.*