11 best 3m intercoms

Product description

RDM Classic D Series D15 Intercom With 1 Station is a wired intercom system that was originally manufactured by 3M. Single station application for fast food operations, Security guard units, dry cleaners, liquor stores, convenience stores and more.

• Indicator lights for power-on, standby, presence alert, talk and listen
• Security windows, security gates or kiosk
• 14 VAC @ 12 VA provided by a 120 VAC 50/60 Hz plug-in
• 5" D x 3" H x 8" W / 13cm x 8cm x 21cm
• All RDM Intercoms are proudly manufactured in the USA

Product description

The 3M Half Facepiece Reusable Respirator 6000 Series helps provide protection against particulates and a wide variety of gases and vapors when used with approved cartridges and filters. When properly fitted and used with approved 3M cartridges and filters, this respirator can help provide protection at concentrations up to 10 times the Permissible Exposure Limit (PEL). The swept back design of the cartridges helps improve balance and visibility. Remarkably comfortable, soft, lightweight facepiece has easy-to-adjust head straps that allow for a customized fit to the user. Replaceable cartridges help reduce waste and costs over time. NIOSH, a Federal government regulatory agency, has tested and approved the 6000 Series Half Facepiece with certain 3M cartridges, filters and supplied air systems. The 6000 Series is NIOSH approved for negative-pressure air purifying and positive-pressure dual airline applications. This half facepiece respirator may be used with 3M Cartridge 6000 Series; 3M Filters 2000, 2200, 7000 or 5000 Series; or 3M Dual Airline Systems against a variety of gases, vapors, and particulate hazards according to NIOSH approvals. Some applications include: assembly and mechanical, chemical clean-up, chemical handling, chipping, chiseling, cleaning, furnace operations, grinding, laboratories, machining, masonry, painting, pouring/casting, sanding, sawing, welding, construction, general manufacturing, industrial maintenance, mining, etc. Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M Half Facepiece Reusable Respirator 6000 Series helps reduce exposure to many contaminants. Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and User Instructions, or call 3M Personal Safety Division (PSD) Technical Service in the U.S.A. In Canada, call. Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

• Comfortable: Soft, Lightweight face piece with easy to adjust head straps for a customized fit
• Durable and Reusable: Respirator can be disassembled, cleaned, and reused; Supplied with reclosable storage bag
• Helps reduce exposure to particulates and a wide variety of gases and vapors when used with approved cartridges and filters
• Use With Other Ppe: Adjustment points located on face piece for improved compatibility with other personal protection equipment
• Applications: Chemical Handling, Chipping, Chiseling, Cleaning, Grinding, Machining, Masonry, Painting, Sanding, Sawing, Welding, Construction, General Manufacturing, Industrial Maintenance
• Compatible: Bayonet connection is compatible with all 3M Bayonet style cartridges and filters
• NIOSH approved for negative pressure air purifying and supplied air dual airline applications
• For industrial/occupational use only; Not for consumer sale or use

User questions & answers

Question:	What filter do i need for this to sand joint compound
Answer:	It should last 3-4 hours on high.
Question:	Can this respirator be disassembled for cleaning? Like if dusk got in when removing it and can parts be replaced if needed..Please and Thank you
Answer:	To turn it on, you must cycle through the different modes. After it stays on a mode for more that 3 seconds, the next button press will turn it off. This allows you to turn it off without cycling through the modes.
Question:	Which filters should i get that would work for this item? are their types of filters for certain duties such as chemical's
Answer:	Please verify that when you charge the battery, the red light above the USBC connector remains on. Then make sure the battery is fully plugged into the LED strip when you push the power button on the LED strip. If it still doesn't work, we will send you a replacement.
Question:	whats icluded in the package? Does it come with a set of filters
Answer:	I think so.. the battery should get full charge before use first time

Product features

Step 1

Place the respirator over your nose and mouth with bottom straps unfastened.

Step 2

Pull the top strap over your head, placing the head cradle on the crown of your head.

Step 3

Hook the bottom straps together behind your neck.

Step 4

Adjust strap tension to achieve a secure fit. Pull the ends of the straps to adjust the tightness beginning with the adjustment points at the top of the respirator and then moving to the adjustment points at the back of the neck. Do not over-tighten. Strap tension may be decreased by pushing out on back side of buckles.

Using Particulate Filters

Place your thumbs over the center of the filters and inhale gently. The facepiece should collapse slightly. If air leaks between the face and the faceseal of the respirator, reposition it and adjust the straps for a more secure seal.

Using Cartridges

Place the palms of your hands over the cartridges and inhale gently. The facepiece should collapse slightly. If air leaks between the face and the faceseal of the respirator, reposition it and adjust the straps for a more secure seal.

Using Hard Case Particulate Filters

Squeeze filter covers with hands toward facepiece to restrict airflow. Be careful not to disturb the position of the respirator. Inhale gently. The facepiece should collapse slightly. If air leaks between the face and the faceseal, reposition it and adjust the straps for a tighter seal.

Product description

3M WorkTunes Connect Wireless Hearing Protector with Bluetooth wireless technology combines a modern, comfortable design with high-fidelity sound quality. This innovative hearing protection lets you conveniently make and take phone calls. Equipped with Bluetooth Wireless Technology, these ear-protective headphones allow you to stream the entertainment of your choice from your smartphone or other mobile device, while providing hearing protection in noisy environments. The low profile and lightweight design are crafted with style in mind. Built-in comfort features such as soft ear cushions and a hat-compatible headband are excellent for extended wear. Whether you're using a power saw or mowing the day away, reach for 3M WorkTunes Connect Hearing Protector with Bluetooth wireless technology to help make your workday entertaining and–most importantly-comfortable. Soft, Conformable Ear Cushions and low-profile cups for a comfortable fit. Auto Shut-off feature with low-battery indicator. Built-in Rechargeable Battery; charging cord included. Compatible with Non Bluetooth Devices via 3.5m audio cable (not included). 30+ Hours of Battery Life Per Charge. Warning: This hearing protection product helps reduce exposure to hazardous noise and other loud sounds. Misuse or failure to wear hearing protectors at all times that you are exposed to noise may result in hearing loss or injury. For proper use, see user instructions or call 3M Technical Service toll free at 1-800-494-3552. In Canada, call 1-800-267-4414.

• NRR of 24 dB (Noise Reduction Rating)
• BLUETOOTH TECHNOLOGY lets you seamlessly stream entertainment from your mobile phone and any other Bluetooth enabled device
• HIGH-FIDELITY SPEAKERS provide premium sound quality
• INTEGRATED MICROPHONE lets you make and take phone calls without removing the hearing protection
• CORD AND ANTENNA-FREE design lets you move easily on the job

User questions & answers

Question:	Does this have am/fm as well as bluetooth
Answer:	You may be able to go to Walker’s website and download a manual
Question:	How long is the battery life
Answer:	No
Question:	Is the rechargeable battery replaceable
Answer:	I too use the ear radio for talk show listening while outdoors. I live in the Huntsville, Al metro area where radio reception is excellent. The Walkers Ear Radio performs flawlessly.
Question:	How long does the battery last on a full charge
Answer:	I believe the posting said they were included; however, there were none shipped with mine. The headphones require 2 double A batteries.

Product features

Simple single-button interface is easy to use with gloves.

Soft, conformable ear cushions and low-profile cups for a comfortable fit.

Flexible headband with cutouts to improve comfort when worn with hats.

Built-in rechargeable battery with auto shut-off and low-battery indicator.

• [ Excellent Signal ] Clear sound quality and long range. An enhanced signal with 5280 feet range helps ensure crisp sound quality. The most trusted wireless intercom system for home!
• [ 10 Channel and 3 Digital Code ] 10 channels and 3 digital codes in a secure wireless intercom system. Features an enhanced anti-interference and can work with other intercoms with the same digital channel code!
• [ 100% Satisfaction ] Love it or your money back! We provide a lifetime service for our intercom. Please feel free to contact us if you have any questions or concerns about your purchase.
• [ Easy to Use with Detailed Manual ] Features include Monitor, Talk, VOX (Voice Operated Exchange), Group, and Calling function. Increase/lower volume too! This intercom system is easier to use than others with user-friendly multi-functions and included step-by-step instructions!
• [ Supported by Power Bank for Outdoor ] This device is compatible with Power Bank (5V 1A) making it easy to take these intercoms any place you want. Besides, it designed with back hole for wall mounting.

User questions & answers

Question:	Can the call buzzer be muted or the volume adjusted
Answer:	Hi, Thank you for your attention for Wuloo wireless intercom system. We are sorry for that the call buzzer can not be muted, but our intercom system has the volume button that you can press VOL+ or VOL- to adjust. If you have any other questions, please feel free to contact us, we are always happy to service for you. Have a nice day. Wuloo Customer Service Team
Question:	Can conversation be made privately without speakout
Answer:	I am not so good in sending back products I bought I should send the Wulo Intercoms back because it is a piece of junk
Question:	Does the other person have to press a button to hear your voice or can you intercom and it comes up without having the person accept? It just comes on
Answer:	Hi, Thank you for your attention for Wuloo intercom system. This intercom is one-single way communication system, it need to press and hold the TALK button while speaking, after finish speaking and release the button and then the others can reply to you. However, if your want to talk with each other hands free, you can use the VOX mode. Please download the manual on product page part [ Technical Specification ] for the details of VOX mode. If you have any other questions, please feel free to contact us, we are always happy to service for you. Have a nice day. Wuloo Customer Service Team
Question:	Is it possible for others to hear our conversation without knowing it
Answer:	Hi dear, Thank you for your interest in our products. This is rarely the case, unless you are on the same frequency channel. If so, you can change the channel code on the device. If your device is in monitored mode, the light will be bright red. If you have any other questions, please feel free to contact us, we are always happy to service for you. Have a nice day. Wuloo Customer Service

Product features

Usage Scenarios

1. Channel key does not light----Check the AC power cord. Is it connected properly? Or change AC adapter to test.

2. Cannot receive response---- Please make sure the intercom set to designated channel? If not, be sure to release TALK when you are not speaking into the intercom. Also be sure to press TALK or CALL when the intercom is in MONITOR mode.

3. Cannot talk to another intercom---- Are both intercoms set to the same channel and code? Please make sure they are properly set up and that you’ve waited until the other user has finished talking.

4.Strong and continuous "beep" sound, static noise ----Move intercoms further apart to eliminate audio feedback. Or, change your intercom to another channel or code.

5. Unit doesn't work----Try the units in a different location. If the units work in a different location but not in your home, there may be a problem with your home concrete wall.

6. Cannot communicate----Confirm both units are set to the same channel and code when you want to communicate. Or, change locations by using Power Bank and moving to other locations for better reception and transmission. Or change the channel code.

Note:

1.The intercom system is a real-time communication system which has no memory or storage function. Because of this, you cannot receive any information while you are talking with others. Additionally, you cannot speak to another user if they are speaking at the same time.

2. Please note that you will need to set the same channel and code if you want 2 intercom stations to receive communication. It also means any other intercoms can also communicate if they have same channel code. For example, your neighbors may be able to interfere with your intercom system. We suggest setting another channel or code to avoid interference.

3. A tip for setting your home intercom system

For example, let’s say you have a 4 station intercom system for your home for different rooms. You can set all 4 stations with the same code A(code A, B or C are choices), then you set different channels for all 4 stations. In this case, you can just click a channel number to call others without set code because your codes are all the same. If your system receives interference, you can change it to another code for all of your stations without changing every station's channel making this a very convenient option.

4. We sincerely suggest that you can read User Manual before you use our intercom system.

• Warm Tip:

Our company is a professional company for FM wireless products. All of our products have passed FCC certification, the FCC ID for this product is 2AOBR-666, you can use it without any worries.

Product description

The 3M Half Facepiece Reusable Respirator 6000 Series helps provide protection against particulates and a wide variety of gases and vapors when used with approved cartridges and filters. When properly fitted and used with approved 3M cartridges and filters, this respirator can help provide protection at concentrations up to 10 times the Permissible Exposure Limit (PEL). The swept back design of the cartridges helps improve balance and visibility. Remarkably comfortable, soft, lightweight facepiece has easy-to-adjust head straps that allow for a customized fit to the user. Replaceable cartridges help reduce waste and costs over time. NIOSH, a Federal government regulatory agency, has tested and approved the 6000 Series Half Facepiece with certain 3M cartridges, filters and supplied air systems. The 6000 Series is NIOSH approved for negative-pressure air purifying and positive-pressure dual airline applications. This half facepiece respirator may be used with 3M Cartridge 6000 Series; 3M Filters 2000, 2200, 7000 or 5000 Series; or 3M Dual Airline Systems against a variety of gases, vapors, and particulate hazards according to NIOSH approvals. Some applications include: assembly and mechanical, chemical clean-up, chemical handling, chipping, chiseling, cleaning, furnace operations, grinding, laboratories, machining, masonry, painting, pouring/casting, sanding, sawing, welding, construction, general manufacturing, industrial maintenance, mining, etc. Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M Half Facepiece Reusable Respirator 6000 Series helps reduce exposure to many contaminants.Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death.Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

• Comfortable: Soft, Lightweight face piece with easy to adjust head straps for a customized fit
• Durable and Reusable: Respirator can be disassembled, cleaned, and reused; Supplied with reclosable storage bag
• Helps reduce exposure to particulates and a wide variety of gases and vapors when used with approved cartridges and filters
• Use With Other Ppe: Adjustment points located on face piece for improved compatibility with other personal protection equipment
• Applications: Chemical Handling, Chipping, Chiseling, Cleaning, Grinding, Machining, Masonry, Painting, Sanding, Sawing, Welding, Construction, General Manufacturing, Industrial Maintenance
• Compatible: Bayonet connection is compatible with all 3M Bayonet style cartridges and filters
• NIOSH approved for negative pressure air purifying and supplied air dual airline applications
• For industrial/occupational use only; Not for consumer sale or use

User questions & answers

Question:	What kind of filters do you need to have if using in asbestos....thank you
Answer:	yes,it has 2 carbon cartridges
Question:	Is this disposeable
Answer:	The mask will filter air to protect against masonry materials and moisture laden materials. should be fine for you needs but make sure you replace filters when they appear dirty
Question:	I am a 5'3" adult female getting prepared to fix rust on my Subaru... 1- will this withstand all the paint, fiberglass and toxins and 2- is a small su
Answer:	Yes
Question:	Will this protect me from Ebola
Answer:	Yes, it has a good filter cartridge that should protect well against mold and chemicals

Product features

Step 1

Place the respirator over your nose and mouth with bottom straps unfastened.

Step 2

Pull the top strap over your head, placing the head cradle on the crown of your head.

Step 3

Hook the bottom straps together behind your neck.

Step 4

Adjust strap tension to achieve a secure fit. Pull the ends of the straps to adjust the tightness beginning with the adjustment points at the top of the respirator and then moving to the adjustment points at the back of the neck. Do not over-tighten. Strap tension may be decreased by pushing out on back side of buckles.

Using Particulate Filters

Place your thumbs over the center of the filters and inhale gently. The facepiece should collapse slightly. If air leaks between the face and the faceseal of the respirator, reposition it and adjust the straps for a more secure seal.

Using Cartridges

Place the palms of your hands over the cartridges and inhale gently. The facepiece should collapse slightly. If air leaks between the face and the faceseal of the respirator, reposition it and adjust the straps for a more secure seal.

Using Hard Case Particulate Filters

Squeeze filter covers with hands toward facepiece to restrict airflow. Be careful not to disturb the position of the respirator. Inhale gently. The facepiece should collapse slightly. If air leaks between the face and the faceseal, reposition it and adjust the straps for a tighter seal.

Product description

NIOSH approved for protection against certain organic vapors, acid gases, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, or hydrogen fluoride. Use with 3M Half and Full Facepieces 6000, 7000 and FF-400 Series with a bayonet-style filter/cartridge connection or 3M Scott AV-3000 HT and AV-3000 SureSeal facepieceswith 3M Scott AV-632 Bayonet Adapter. Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and User Instructions, or call 3M Personal Safety Division (PSD) Technical Service in the U.S.A. at 1-800-243-4630. In Canada, call 1-800-267-4414. Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, or death, or property damage. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

From the Manufacturer

The 3M™ Multi Gas/Vapor Cartridge/Filter 60926 P100 may be used for respiratory protection from certain organic vapors, chlorine, hydrogen chloride, sulfur dioxide, chlorine dioxide, hydrogen sulfide, ammonia, methylamine, formaldehyde, or hydrogen fluoride, and non-oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepiece masks. This cartridge/filter is not for use in environments that are immediately dangerous to life or health (IDLH). Recommended applications for the cartridge/filter include petrochemical and chemical processing. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge/filter is commonly used in the following industries: utilities, pharmaceuticals, mining, and primary metals.

This multi gas/vapor cartridge/filter combination works with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet attachment holders. The cartridge/filter is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain organic vapors, acid gases, ammonia, methylamine, formaldehyde and non-oil and oil particulates. The cartridge/filter has been assigned the color code “Magenta/ Olive” in the NIOSH system.

Breathing organic vapors, acid gases, ammonia, methylamine, formaldehyde and particulates can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M™ Multi Gas Vapor Cartridge 60926 to help reduce exposure to certain organic vapors, acid gases, ammonia, methylamine, formaldehyde and particulates.

For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Personal Safety products, focused on worker safety, include respirators, hearing protection, air and noise-monitoring devices, eyewear, hard hats, welding shields, coveralls, fall protection, reflective material, and comprehensive training programs. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

• Cartridge or Filter Type Cartridge / Filter Combo
• Gas & Vapor Protection Type: Organic Vapor/Acid Gas/Ammonia/Methylamine/Formaldehyde
• NIOSH Cartridge or Filter Assigned Color Coding: Magenta/Olive

User questions & answers

Question:	Why are they pink
Answer:	No. The quick latch would be #6503QL. Thank you for considering 3M products.
Question:	Would this work with cigarette smoke. I cant get a family member to quit and I don't want to breathe their carcinogenic smoke
Answer:	Blocks cigarettes sent the same way it blocks the occasional passing of gas. ...not well.
Question:	Can the filter be cleaned and reused
Answer:	Need to buy seperate
Question:	Will protect me against the zombie apocalypse
Answer:	Yes

Product features

3M Multi Gas/Vapor Cartridge

• Swept-back design allows an enhanced field of view and comfort
• Bayonet compatibility allows use with many 3M half and full facepiece designs
• Wide range of applications reduces inventory needs
• Simple installation and usage requirements reduce training needs

This multi gas/vapor cartridge/filter combination works with 3M Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet attachment holders. The cartridge/filter has been assigned the color code 'Magenta/ Olive' in the NIOSH system.

Product description

PERFECT GIFT for CHRISTMAS : DON'T WAIT, ADD TO CART NOW For YOUR LOVED ONES AND SENIORS



Wireless caregiver pager easily installed with waterproof IP55 Plug-in and play.



Features

Modern & stylish design

Easy installation

Approx. 500+feet operation range (open air)

5 Levels of volume

IP55 Waterproof

55 Ringtones. The default ringtone is “Ding-Dong”.

Low power consumption

Specifications

Working voltage of Receiver:110-260V

Battery in Transmitter:12V 23A Alkaline battery

Working distance:500+ft In open area.

Package

2 x Receiver

2 x Transmitters

2 x Double Sided Adhesive Tapes

1 x User Manual

2 x 12V 23A Batteries

NOTE:

The transmitter requires a 23A 12V Alkaline battery which is already included and not rechargeable. The Receiver plugs into a wall outlet and requires no battery.

• 2 Pager and 2 Call Buttons, the Idea is for Both Caregiver and Patient/Elderly/Resident/Handicapped/Sick Freedom while Still calling for Help at home. Not need to Yell to Get Someone’s Attention
• The system with 2 chimes/receivers for large house allows you to set one in bedroom to wake you up when wireless signal comes in, Another could set in other floor,passage or any other location with an electric outlet
• Transmitter/Push Call Button is Waterproof. Acceptable for Meal/Soup Splash. And Allow to be Installed in the Washing Room
• Transmitter/Push Call Button is Easy Carry. It can Be Put in Pocket. Or Hang on neck as Pendant. Neck Strap included. Fixed in Bedside/Washing Room. The Fixed Bracket and Double sticker are included
• Pager/Chime Unit has 55 Ring Tones for Your Choice. Operating Range is 500+ Feet in open Area. 5 Level Adjustable Volume From 0db to 110db. Easy Use ( Plug and Play) Plug the Receiver into an Electrical Outlet

User questions & answers

Question:	I lost my manual, is it online
Answer:	hello if it is hang on the wall when shower, it will. be ok. please don't worry, our warranty is 1 year. any further questions, please feel free to ask us. Regards Bitiwend
Question:	Do the springs that press against the batteries do so firmly? I bought a Daytech brand and the springs are the cheapest pieces of junk i ever saw
Answer:	I was upstairs on second floor and she was on ground floor still worked no issues
Question:	Does it have backup battery
Answer:	Not that I can tell no
Question:	Can both the care giver and the patient page each other
Answer:	Here is the pager we ordered for the bed alarm which I assume will also sync with the door alarm too. https://www.amazon.com/dp/B077MMVD3Y/ref=cm_sw_r_tw_dp_U_x_kzslDbZS6N2G2

Product features

Expandable with Receivers/Transmitters

Expand your existing CallToU caregiver pager system with up to 55 transmitters and 20 receivers for your specific usage scenario in seconds thanks to the simple pairing method.

How to pair more transmitters

Step 1:Press and hold down the volume button on the receiver until it makes a "Ding" sound and the receiver indicator flashes.

Step 2:Press the call button quickly,it will makes a "Ding-Ding" sound and the receiver indicator flashes.

Step 3:Press the call button again to confirm whether the receiver can sound,if yes,the pairing is completed.

If the caregiver pager can not work when you received it,please re-pair it.

55 Ringtones and 5 Level Volume

55 Ringtones ,the default ringtone is “Ding-Dong”

5 Level Adjustable Volume From 0db to 110db

Working voltage of Receiver:110-260V

How to change the ringtone

Step 1:Press the " forward " / " backward " button on the receiver to choose your favorite melody.

Step 2:Press and hold down the volume button ,until it makes a "Ding" sound and the receiver indicator flashes.

Step 3:Press the call button quickly,it will makes a "Ding-Ding" sound and the receiver indicator flashes.

Step 4:Press the call button again to confirm whether the current ringtone is the one you have set,if yes,the pairing is completed.

Perfect Gift for Seniors

Caregiver pager for taking care of patients or elderly at family or nursing home，give you more freedom.

Package

2 x Receivers

2 x Transmitters

2 x Double Sided Adhesive Tapes

2 x 12V 23A Batteries

1 x User Manual

Product description

• Surface-mount door intercom works with a master intercom (sold separately) to enable audio communication with visitors
• For use with the Aiphone LEF and LEM Series master intercoms (sold separately)
• Weather-resistant black plastic faceplate surface mounts to a single-gang box using the included mounting hardware

User questions & answers

Question:	it will work with pacific model af-100 amplifier
Answer:	yes
Question:	Can I buzz people in with this
Answer:	This camera has 14GB of internal memory (No SD card slot)
Question:	Will this work as an interior room to room intercom system
Answer:	It can use bluetooth or WiFi between the device and a phone. No Internet (WiFi) oe data is needed or required. Device establishes it's own private WiFi connection.
Question:	If possible to connect this unit with 1 speakear the volume is not to loud in big area is any wire to use? Trying to use this unit in classroom
Answer:	It has a 1/4" - 20 tripod mount thread

• [ Excellent Signal ] Home intercom system with clear sound quality and long range. An enhanced signal with 5280 feet range helps ensure crisp sound quality. The most trusted wireless intercom system for home!
• [ 10 Channel and 3 Digital Code ] 10 channels and 3 digital codes in a secure wireless home intercom system. Features an enhanced anti-interference and can work with other intercoms with the same digital channel code!
• [ 100% Satisfaction ] Love it or your money back! We provide a lifetime service for Wuloo home intercom system. Please feel free to contact us if you have any questions or concerns about your purchase.
• [ Easy to Use with Detailed Manual ] This home intercom system have features include Monitor, Talk, VOX (Voice Operated Exchange), Group, and Calling function. Increase/lower volume too! This intercom system is easier to use than others with user-friendly multi-functions and included step-by-step instructions!
• [ Supported by Power Bank for Outdoor ] This home intercom system is compatible with Power Bank (5V 1A) making it easy to take these intercoms any place you want. Besides, it designed with back hole for wall mounting.

User questions & answers

Question:	Will rain destroy the unit
Answer:	Yes these are not weatherproof, however Amazon sells a weatherproof unit desperately that will work with these indoor unitd
Question:	Will it be used with batteries
Answer:	Hi dear, Thank you for your interest in our products. This intercom can’t be used with batteries, but it supports power bank supply. If you have any other questions, please feel free to contact us, we are always happy to service for you. Have a nice day. Wuloo Customer Service
Question:	how many intercom units can be run on one system? if you can run more than four can you buy separate units to add to the system
Answer:	Hi Friend, thanks for your attention for our products. Yes, this intercom have 10 channel and 3 codes, so it can be run more than four. but we suggest that you run it less than 10 units in one system. Besides, you can buy separate units to add to the system, it's easy to add it. If you need a intercom system more than 10 units, we suggest another model in our sotore, here is the link : https://www.amazon.com/Wuloo-Intercoms-Wireless-Communication-4Stations/dp/B07H2XR6MP
Question:	Hi, please tell me about the security on these. Can someone eavesdrop on our conversations? Is the communication encrypted
Answer:	I purchased these units less than two months ago. Recently I have heard multiple conversations coming through the intercom. The other night I had to unplug my units because of the chatter.

Product features

Usage Scenarios

1. Channel key does not light----Check the AC power cord. Is it connected properly? Or change AC adapter to test.

2. Cannot receive response---- Please make sure the intercom set to designated channel? If not, be sure to release TALK when you are not speaking into the intercom. Also be sure to press TALK or CALL when the intercom is in MONITOR mode.

3. Cannot talk to another intercom---- Are both intercoms set to the same channel and code? Please make sure they are properly set up and that you’ve waited until the other user has finished talking.

4.Strong and continuous "beep" sound, static noise ----Move intercoms further apart to eliminate audio feedback. Or, change your intercom to another channel or code.

5. Unit doesn't work----Try the units in a different location. If the units work in a different location but not in your home, there may be a problem with your home concrete wall.

6. Cannot communicate----Confirm both units are set to the same channel and code when you want to communicate. Or, change locations by using Power Bank and moving to other locations for better reception and transmission. Or change the channel code.

Note:

1.The intercom system is a real-time communication system which has no memory or storage function. Because of this, you cannot receive any information while you are talking with others. Additionally, you cannot speak to another user if they are speaking at the same time.

2. Please note that you will need to set the same channel and code if you want 2 intercom stations to receive communication. It also means any other intercoms can also communicate if they have same channel code. For example, your neighbors may be able to interfere with your intercom system. We suggest setting another channel or code to avoid interference.

3. A tip for setting your home intercom system

For example, let’s say you have a 4 station intercom system for your home for different rooms. You can set all 4 stations with the same code A(code A, B or C are choices), then you set different channels for all 4 stations. In this case, you can just click a channel number to call others without set code because your codes are all the same. If your system receives interference, you can change it to another code for all of your stations without changing every station's channel making this a very convenient option.

4. We sincerely suggest that you can read User Manual before you use our intercom system.

• Warm Tip:

Our company is a professional company for FM wireless products. All of our products have passed FCC certification, the FCC ID for this product is 2AOBR-666, you can use it without any worries.

Product description

This full facepiece reusable respirator offers lightweight comfort and ease of use. Combine with appropriate 3M particulate filters or cartridges to help provide respiratory protection against particulates or a variety of gases and vapors. The 3M Full Facepiece Reusable Respirator 6000 Series helps provide protection against certain airborne contaminants. Versatile—use with 3M particulate filters, gas/vapor cartridges and supplied air respirator systems. The 3M Cool Flow Valve helps make breathing easier. These features combine to make a comfortable, practical and economical solution. Recommended applications include assembly, chemical clean-up, chemical handling, chemical splash, chipping, chiseling, cleaning, furnace operations, grinding, laboratories, machining, masonry, painting, pouring/casting, sanding, and sawing. Industries in which this full face respirator are commonly used include agriculture, construction, general manufacturing, pharmaceuticals, and primary metals. NIOSH, a Federal government regulatory agency, has tested and approved the 3M Full Facepiece Reusable Respirator 6000 Series with 3M cartridges, filters or PAPR and supplied air systems to help reduce breathing certain airborne contaminants. The 3M Full Facepiece Reusable Respirator 6000 Series facepiece also meets the impact requirements of the ANSI Z87.1-2010 standard, high impact level for face and eye protection. The facepiece works with these approved 3M filters and accessories: 2071, 2076HF, 2078, 2091/07000, 2096, 2097/07184, 2291, 2296, 2297, 7093, 7093C/37173, 603, 5N11, 5P71/07194, 501, and 502. It also works with the following 3M Cartridges 6000 Series: 6001, 6001i, 6002, 6003, 6004, 6005, 6006, 6009, 60921, 60921i, 60922, 60923, 60924, 60925, 60926, 60928, and 60929S. Breathing hazardous particles, gases and vapors can be harmful to your health. With proper fit, use, and the appropriate cartridge/filter, the 3M Full Facepiece Reusable Respirator 6000 Series helps reduce exposure to many contaminants (i.e., dust, mists, fumes, mold, bacteria, paints, acids, ammonia, chlorine, other chemicals, etc.). Enhanced comfort and visibility features make wearing the respirator noticeably more enjoyable. Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death.

• Enhanced Comfort: Lightweight, Well Balanced, Full Face Respirator Design and Silicone Face Seal for Enhanced Comfort and Durability
• Breathe Easier: 3M Cool Flow Valve Helps Provide Cool, Dry Comfort
• Directs Exhaled Breath Downward: Unique Center Adapter Directs Exhaled Breath and Moisture Downward
• Large Lens: Provides a Wide Field of View for Excellent Visibility; Integrated Optical Correction Limits Distortion As You Look From Left to Right
• Easy Cleaning: Smooth Surface Allows for Quick and Easy Cleaning
• Meets requirements of ANSI Z87.1 2010 for high impact (Z87+)
• Combine with 3M particulate filters or chemical cartridges to help provide respiratory protection against particulates (dust, fumes, mold, etc) and gases and vapors (paint, acid, chemicals, etc.)
• For industrial/occupational use only; Not for consumer sale or use

User questions & answers

Question:	Which filters do I need to buy for this mask
Answer:	From the 3M Cartridge Filter Guide and Brochure: "Why are the filters and cartridges 'pink'? When a filter or cartridge has the magenta color code it has the P100 designation. This color provides uniformity and easy identification."
Question:	I need to crawl around in a dark environment with this and can't hold a flashlight while I'm doing it. Suggestions on a headlamp that will work
Answer:	Short Answer: 3M N100 Mask filters out 99.97% of particles larger than 0.3-Microns (PM2.5 means 2.5-microns or larger). A 3M N100 Mask works well against cigarette smoke and smog covered cities. Longer Answer: Your concern is with PM2.5. See explanation below: The most harmful pollutant to human health is called PM 2.5, particle matter smaller than 2.5 microns in diameter that's found in soot, smoke, and dust. PM 2.5 is especially dangerous because it can get lodged in the lungs and cause long-term health problems like asthma and chronic lung disease. PM 2.5 starts to become a major health problem when there is more than 35.5 micrograms (µg) of PM 2.5 per cubic meter of air, according to the Environmental Protection Agency. But the World Health Organizations recommends keeping yearly average PM 2.5 levels three times lower than that. The most polluted cities on Earth have anywhere between 11 and 20 times that amount - based on the new WHO data from cities that collect it. Top 15 Cities in the world with unclean air: https://www.google.com/amp/s/amp.businessinsider.com/the-cities-with-the-worlds-worst-air-pollution-who-2016-5 3M Respirator Selection Help: https://www.3m.com/3M/en_US/safety-centers-of-expertise-us/respiratory-protection/respirator-selection/ 3M Half/Full Respiratory Guide: https://www.3m.com/3M/en_US/company-us/all-3m-products/~/All-3M-Products/Personal-Protective-Equipment/Reusable-Respirators/?N=5002385+8711017+8720539+8720550+3294857497&rt=r3 3M Disposable Respirator Guide: https://www.3m.com/3M/en_US/company-us/all-3m-products/~/All-3M-Products/Personal-Protective-Equipment/Disposable-Respirators/?N=5002385+8711017+8720539+8720542+3294857497&rt=r3 Sincerely, Jacob My YouTube Channel: SurvivalGeek 11-02-2017
Question:	What full face respirator works best with glasses
Answer:	Yes and no. The filter contains 2 elements...the chemical filter cartridge, and the P100 particle filter material. For the chemical cartridge, it will eventually lose it's ability to filter hazardous chemicals...after 3 years from the manufacture date, after maybe a few weeks upon breaking the package seal ( depending on storage environment), after 8 hours of exposure to chemicals ( depending on chemical type and concentration). Bottom line is it cannot be "reused" to filter hazardous chemicals after it ceases doing so effectively. The particle filter actually increases in effectiveness as it becomes loaded with particles. The point at which the particle filter must be replaced is when it becomes difficult to breath through, or when it is contaminated with a hazardous substance and cannot be decontaminated. If using to filter pathogens, the particle filter can be disinfected with hydrogen peroxide (3%-7% H2O2 1 min or more contact time) and used until breathing becomes difficult. Spray with H2O2 until wet and keep wet for at least 1 minute, and allow to dry fully before using again. Just note, it will no longer filter hazardous chemicals and can be used to filter particles only, and should be marked as such. If the contaminant is a hazardous substance like asbestos, lead or a chemical, discard the filter using appropriate HAZMAT protocols after 1 use.
Question:	Does this mask protect you from airborne viruses such as Ebola
Answer:	No, this will not protect you against a zombie apocalypse as zombies are not created through airborne particles. You need a different kind of protection that would protect you from bites, scrapes, etc... it might help if you smashed a zombie in the head with the filter but there are many other tools to help you in those situations. I HIGHLY recommend this kit from Gerber for better protection: http://www.gerbergear.com/Apocalypse/Gear/Apocalypse-Kit_30-000601Good luck, and remember... don't stare at the flowers. ;)

Product features

Step 1

Fully loosen all four head straps. Pull hair back with one hand. Bring facepiece up to face with other hand.

Step 2

While holding the facepiece in place, pull the straps over your head.

Step 3

Tighten the two bottom straps and then tighten the two top straps.

Step 4

Make sure the back of the harness is centered on the back of the head.

Positive Pressure User Seal Check

Place the palm of your hand over the opening in the exhalation valve cover and exhale gently. If facepiece bulges slightly and no air leaks are detected between the face and the facepiece, a proper seal has been obtained. If faceseal air leakage is detected, reposition the respirator on your face and/or readjust the tension of the straps to eliminate leakage and recheck seal. If you cannot achieve a proper seal, DO NOT enter the contaminated area. See your supervisor.

Negative Pressure User Seal Check Using Particulate Filters

Place your thumbs onto the center portion of the filters, restricting airflow through filters and inhale gently. If you feel facepiece collapse slightly and pull closer to your face with no leaks between the face and the facepiece, a proper seal has been obtained. If faceseal air leakage is detected, reposition the respirator on your face and/or readjust the tension of the straps to eliminate leakage and recheck seal. If you cannot achieve a proper seal, DO NOT enter the contaminated area. See your supervisor.

Negative Pressure User Seal Check Using Cartridges

Place palms of hands to cover face of cartridge or open area of 3M Filter Retainer 501 and inhale gently. If you feel facepiece collapse slightly and pull closer to your face with no leaks between the face and facepiece, a proper seal has been obtained. If faceseal air leakage is detected, reposition the respirator on your face and/or readjust the tension of the straps to eliminate leakage and recheck seal. If you cannot achieve a proper seal, DO NOT enter the contaminated area. See your supervisor.

Product description

The 3M Rugged Comfort Quick Latch Half Facepiece Reusable Respirator 6500 Series helps provide workers with respiratory protection in harsh, dirty work environments against airborne contaminants when used with approved 3M cartridges and filters. This facepiece combines comfort, durability, and stability with a firm, lightly textured silicone faceseal and strong body construction. The proprietary quick latch design offers an easy, one-hand touch drop-down mechanism for putting the facepiece on and taking it off while moving in and out of contaminated areas. The quick latch also eliminates the need to remove a hardhat or faceshield when lowering or raising the respirator. When properly fitted and used with approved 3M cartridges and filters, this respirator helps provide respiratory protection in workplaces at concentrations up to 10 times the Permissible Exposure Limit (PEL). While being the lightest silicone 3M half facepiece, it is still rugged enough to withstand long hours and extreme conditions. The resilient silicone faceseal offers an extended facepiece life, even keeping its shape in high-heat environments. Innovative design features include a valve cover that helps to direct exhaled breath and moisture downward and 3M’s proprietary Cool Flow Valve that helps to make breathing easier. Made to fit securely and comfortably on the head, the facepiece comes with an adjustable head harness assembly featuring long-lasting polyester/spandex straps that stretch and conform to the individual who wears the respirator. This facepiece is compatible with all 3M bayonet-style filters and cartridges to help provide respiratory protection against a variety of gases, vapors, and particulate hazards (i.e., dust, paint aerosols, etc.) according to NIOSH approvals. This filter compatibility helps to make the respirator highly versatile for many workplace environments and a variety of jobs where respiratory protection is required. Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. Compatible With: Line Compressed Air System SA Series.

• Easy on and Off: Quick latch design offers an easy, 1 hand touch drop down mechanism for putting the face piece on and off while moving in and out of contaminated areas
• Comfortable: Adjustable head harness assembly promotes a comfortable fit with three size adjustable head cradle; Long lasting polyester/spandex straps
• Cool Comfort: Proprietary 3M cool flow valve is designed for easy exhalation to help keep the wearer more comfortable
• Durable: Resilient silicone faceseal provides comfort, durability, and stability with a soft but firm seal. Keeps its shape in high heat environments
• Low Profile: Half face piece design offers a wide field of view and compatibility with welding and grinding shields
• Reduces Fogging: Exhalation valve cover directs exhaled breath and moisture downward to reduce fogging of face shields
• Compatible: Bayonet connection is compatible with all 3M bayonet style cartridges and filters
• For industrial/occupational use only; Not for consumer sale or use

User questions & answers

Question:	What's the difference between the 6500QL series & the 7500 series?? It can't only be the "quick release" because the 7500 can be made to do that. Thx
Answer:	It depends on what you're doing - I got this filter because it seems to be pretty all-encompassing: http://www.amazon.com/3M-Low-Maintenance-Cartridge-Purifying-Respirator/dp/B00AEFCP0E/ref=sr_1_1?s=industrial&ie=UTF8&qid=1392297594&sr=1-1&keywords=6006+filterIt's been effecticve for fiberglass insulation, sanding plastics and composites, spray painting, etc.
Question:	Does this mask include a set of filters
Answer:	The 3AAA eLED® Vizion™ Headlamp from Underwater Kinetics works awesome...no pivot point to wear out and break, had mine for 4 years now...still going strong. The led light module is even removable...to use like a camping light.
Question:	Does anyone have experience with/ know what filter(s) I should buy to go with this mask for sanding wood and old paint and spraypainting
Answer:	This seals fairly well around my glasses. They are very large and still have no trouble fitting into the mask. The mask seals fairly well over the stems, but I do have wire frame glasses so the frames atr only 0.04 in (1mm) thick. Also I wear the "3M Peltor Over the Head Earmuff" which pushes the frame against my skin.
Question:	I want vacuum packaging
Answer:	from what Ive seen from 3ms website, it looks like particulate filters are used for biological with the minimum being something like the 3M 2091 P100 Particulate Filter. Some of the cartridge filters appear to also have a particulate ability and p100 rating, but Im still figuring this all out.In regards to ebola and respiratory protection follow the link below, or if you dont like clicking on links, then just google "Personal Protective Equipment (PPE) for Ebola virus disease (EVD)" You will see the link to 3m's pdf filehttp://multimedia.3m.com/mws/mediawebserver?66666UgxGCuNyVs658T_OxM6EVtQEcuZgVs6EVs6E666666--

Product features

Step 1

Place the respirator over the mouth and nose, with bottom straps unfastened. Place the top strap over your head, placing the head cradle on the crown of your head.

Step 2

Grasp the straps, place them at the back of the neck and hook them together.

Step 3

Adjust strap tension by pulling ends until a secure fit is obtained. Balance strap tension by adjusting the top and bottom strap buckles. Do not overtighten.

Positive Pressure User Seal Check

Cover the opening in the exhalation valve cover with your hand. Be careful not to disturb the position of the respirator. Exhale gently. If the facepiece bulges slightly and no air leaks are detected between your face and the facepiece, a proper seal has been obtained.*

*If faceseal air leakage is detected, reposition the respirator on your face and/or readjust tension of the straps to eliminate the leakage. If you cannot achieve a proper seal, do not enter contaminated area. See your supervisor.

Negative Pressure User Seal Check

Using hands, press or squeeze filter covers toward facepiece to restrict airflow. Be careful not to disturb the position of the respirator. Inhale gently. If you feel the facepiece collapse slightly and pull closer to your face with no leaks between your face and the facepiece, a proper seal has been obtained.*

Using 3M Cartridges

Place the palms of your hands over the cartridges and inhale gently. The facepiece should collapse slightly. If air leaks between the face and the faceseal of the respirator, reposition it and adjust the straps for a tighter seal. If you cannot achieve a proper seal, do not enter the contaminated area. See your supervisor.*

Using 3M Particulate Filters

Place your thumbs onto the center portion of the filters, restricting airflow into the respirator tube of the filters. Be careful not to disturb the position of the respirator. Inhale gently. If you feel the facepiece collapse slightly and pull closer to your face with no leaks between your face and the facepiece, a proper seal has been obtained.*