10 best 3m hard hats

Product description

3M Hard Hat H-700 Series have a tough, durable shell and adjustable suspension system that work together to help absorb the impact of small falling objects and help protect workers from bumping into fixed objects. The suspension sits lower on the head to help reduce pressure and increase security. Featuring a four-point ratchet suspension system, these hard hats are adjustable, delivering a comfortable, secure fit that helps reduce discomfort and slippage. Soft brow pads cushion the forehead and are removable for easy replacement. For added versatility, the hard hat features accessory slots to accommodate 3M’s cap mounted ear-muffs, headgear, face shields, and welding helmets (all sold separately). The 3M Hard Hat is designed for industrial applications with personal protective equipment (PPE) compatibility in mind. Disclaimer:  3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.  For additional product information, visit www.3M.com.

From the Manufacturer

• REDUCES PRESSURE POINTS: 3M’s unique, lightweight shell sits lower on the head to reduce pressure points and increase security
• ADJUSTABLE COMFORT: Featuring a four-point ratchet suspension system, it is adjustable, delivering a comfortable, secure fit that helps reduce discomfort and slippage
• UPWARD VISIBILITY: Reverse donning eliminates the brim and can help enhance upward visibility
• INSTALL SUSPENSION: 3M Hard Hats are shipped with suspension uninstalled to prevent distortion during shipping It must be correctly installed according to the instructions to provide maximum protection
• ANSI Z891: Meets the ANSI Z891 Class G and E for protection against electrical contact
• For industrial/occupational use only Not for consumer sale or use

User questions & answers

Question:	is both the hard hat and the ratchet suspension included
Answer:	The USB charge cord that came with my light doesn't work. It apparently has a broken wire connection in it because if I move it a little the red light appears. The slightest movement of the headlamp or cable causes the red light to go out. I'm going to try and contact Slonik and ask for a replacement cable. In the meantime I'll charge the battery using a wall outlet charger for the 18650 battery.
Question:	What is the size of the head that it fits
Answer:	Hello, I cannot find any listed for sale but you may be able to contact SLONIK and get a replacement. Maybe make your own from a thin clear cover of a welding hood or burning goggles. Good luck
Question:	Is this hard hat type1 classE
Answer:	No. Only 2 intensity levels...both lights low power and both lights high power....plus flashing mode.
Question:	are these vented
Answer:	The rechargeable 18650 rechargeable battery that comes with this is a flat top but you can use a regular raised 18650 as well. Any rechargeable 18650 will work.

Product features

STEP 1

Turn hard hat shell upside down on its crown and place the suspension in the hard hat with the brow pad towards the front brim of the hard hat

STEP 2

Fold one suspension key out and up.

STEP 3

Slide suspension key into slot as shown.

STEP 4

Press key fully into slot. Repeat for other three suspension keys.

STEP 5

Note that suspension webbing may be tight initially upon installation of the keys – push down at the center cross with your fist to ensure all clips are secured and webbing is ready to be worn.

STEP 6

Completed assembly.

Product description

3M Hard Hat H-700 Series have a tough, durable shell and adjustable suspension system that work together to help absorb the impact of small falling objects and help protect workers from bumping into fixed objects. The suspension sits lower on the head to help reduce pressure and increase security. Featuring a four-point ratchet suspension system, these hard hats are adjustable, delivering a comfortable, secure fit that helps reduce discomfort and slippage. Soft brow pads cushion the forehead and are removable for easy replacement. 3M Uvicator sensor lets wearer know when to replace hard hat due to UV exposure. Vents built into the hard hat help release heat buildup and allow air circulation to enhance the comfort of the worker. Vented hard hat versions meet the ANSI Z89.1 Class C for non-electrical applications. For added versatility, the hard hat features accessory slots to accommodate 3M’s cap mounted ear-muffs, headgear, face shields, and welding helmets (all sold separately). The 3M Hard Hat is designed for industrial applications with personal protective equipment (PPE) compatibility in mind.

Disclaimer:  3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.  For additional product information, visit www.3M.com.

From the Manufacturer

3M H-700 Series Vented Hard Hat with 4-Point Ratchet Suspension and UVicator Sensor is comfortable, tough and lightweight protective headgear that helps protect the top of the head due to the potential hazard of small falling objects or exposed fixed objects that may be bumped into. The UVicator sensor changes color as the hard hat is exposed to UV light. The sun’s UV rays can cause a hard hat shell to become brittle and compromise its ability to protect the wearer. With the UVicator sensor, the hard hat should be replaced when the sun-smart sensor changes from red to white. Vents built into the hard hat release heat buildup and allow air circulation to enhance comfort of the worker. The cooling effect of air circulation helps reduce perspiration in hot and humid working environments. A 4-point ratchet suspension adjusts easily to allow for a customized height and fit that best suits the individual who wears the hard hat. The ratchet system allows tightening or loosening the fit without taking the hard hat off.

Workers wearing this hard hat will also appreciate its low profile design and balanced fit, which provide for a more comfortable and less obtrusive feel. A short brim allows for upward visibility, a feature that can enhance both safety and productivity. The soft brow pad cushions the forehead and is removable for easy replacement. For added versatility, the hard hat features accessory slots to accommodate 3M’s cap mounted ear-muffs, headgear, faceshields, and welding helmets (all sold separately). A hard hat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, forestry, and mining.

This hard hat meets requirements of ANSI/ISEA Z89.1-2009 Type 1, Class C. The hat may be worn in either the forward or reverse donning position. Hat weighs 12.8 ounces.

The rigid shell of the 3M Hard Hat H-700 Series helps reduce chances of injury by deflecting small falling objects from striking the head of the person who wears this protective headgear. The hard hat also helps protect from injuries due to bumping into stationary objects such as pipes, rods, shafts, construction timbers, branches, or exposed electrical conductors. The suspension system inside the hard hat helps absorb the effects of the impact to dissipate the force. Even small objects can cause significant injury due to the force built up from the momentum of falling. Something as small as a washer or coin can strike with the force of several pounds if it falls far enough. 3M hard hats reduce the impact if a strike occurs.

Suspension Assembly Instructions

Watch the simple-assembly video to see how easily the 3M Ratchet Suspension System inserts into the shell. Video is found at the top of the page under the large hard hat photo. Simply click on video image to view.

For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Personal Safety products, focused on worker safety, include respirators, hearing-protection products, air-monitoring devices, environmental-safety products, and comprehensive training programs. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

• REDUCES PRESSURE POINTS: 3M’s unique, lightweight shell sits lower on the head to reduce pressure points and increase security.
• ADJUSTABLE COMFORT: Featuring a four-point ratchet suspension system, it is adjustable, delivering a comfortable, secure fit that helps reduce discomfort and slippage.
• VENTED: Vents built into the hard hat help release heat buildup and allow air circulation to enhance the comfort of the worker.
• UV INDICATOR: Proprietary UV indicator lets wearer know when to replace helmet due to UV exposure.
• UPWARD VISIBILITY: Reverse donning eliminates the brim and can help enhance upward visibility.
• INSTALL SUSPENSION: 3M Hard Hats are shipped with suspension uninstalled to prevent distortion during shipping. It must be correctly installed according to the instructions to provide maximum protection.
• ANSI Z89.1: Meets the ANSI Z89.1 Class C for non-electrical applications.
• For industrial/occupational use only. Not for consumer sale or use.

User questions & answers

Question:	Is the rear strap at the back of the head adjustable, e.g., can you raise and lower it or is it fixed
Answer:	NO THERE IS NO CABLE COMES WITH IT
Question:	Has anybody attached earmuffs and a faceshield attachment to this helmet? If so, where did you get the parts? The 3M website is vague on this
Answer:	The battery should be changed once a year, but some batteries lose power early. The smoke detector will also sound a beep, when the battery runs low. For me, I find that the Duracell Batteries last the longest. I hope this helps.
Question:	I have a 7.75 hat size, will this fit a large
Answer:	You scored 100%--all of the people who answered you are WRONG, including the seller. I will give you the right answer, which you can rely upon because I know what I am talking about. Let that be an education for everyone that an answer from someone identified as a "Seller" has no more likelihood of being correct than an answer from anyone else. This indicates the problem with asking people who you don't know on the Internet a question that involves understanding scientific ideas. It's obvious that none of the 3 people who answered you, including the seller, has any understanding of how this unit works. Keep that in mind if you ask any other questions on Amazon about any electrical or otherwise dangerous devices. Anyone can post an answer so you could very well get an answer that could kill you. On the product page for an electric heater, I saw one woman give an answer that could very well kill the person who asked it. Shawn Reichle is wrong because he/she is answering the WRONG question. It's apparent that person is not even talking about the carbon monoxide detector. Alfred S. Thornton's answer has nothing to do with cars, so it is not helpful to you. The answer from Unique hardware and paints inc…(Seller) is just wrong because that person does not understand both cars and carbon monoxide detectors! Unless your car was manufactured before 1976, the emissions-control devices in your car bring the CO emitted from the tailpipe to near ZERO. That's right. Cars do still emit pollution, but carbon monoxide emitted is almost not measurable. Even if your car were to emit a noticeable amount of carbon monoxide, the detector will not alarm until the concentration in your room is 400 ppm. That is such a high concentration that you would never accumuate that much just by pulling your car into or out of your garage. The bottom line is that this unit will NEVER ring a carbon monoxide alarm in your garage as a result of your routine use of your car. I recommend that people put CO detectors everywhere--the kitchen, the bedroom, the basement, the garage.
Question:	The 3M website says the suspension is upgradeable to 6-point harness. Has anybody done this
Answer:	The model is 'SCO2'. They use the 'B' to stand for Battery which they supply. They have another model that is called SCO2LB. The 'LB' is for Lithium Battery that this model have. If you use the search and put in 'SCO2LB' you will see the other model.

Product features

STEP 1

Turn hard hat shell upside down on its crown and place the suspension in the hard hat with the brow pad towards the front brim of the hard hat

STEP 2

Fold one suspension key out and up.

STEP 3

Slide suspension key into slot as shown.

STEP 4

Press key fully into slot. Repeat for other three suspension keys.

STEP 5

Note that suspension webbing may be tight initially upon installation of the keys – push down at the center cross with your fist to ensure all clips are secured and webbing is ready to be worn.

STEP 6

Completed assembly.

Product description

3M H-700 Series hard hats feature a comfortable 4-point pin lock suspension and standard brow pad. The hard hat features accessory slots for ear muff attachment and/or headgear and Face shield attachment. The hard hat meets the requirements of ANSI/ISEA Z89.1-2009 Type 1, Class C, G and E.

• Suspension sits lower on head to reduce pressure and increase security
• Standard brow pad enhances comfort and extends service life of hard hat
• Hard hats

Product description

Protective full brim hard hat with comfortable 4 point ratchet suspension and standard brow pad. Available in several colors. Meets requirements of ANSI/ISEA Z89.1 2014 Type I, Class G and E.

From the Manufacturer

3M™ H-800 Series Full Brim Hard Hat with Ratchet System is comfortable, tough and lightweight protective headgear that helps protect the head from small falling objects and fixed objects that may be bumped into. The 4-point suspension system has unique features that allows for a customized height and fit that best suits the individual needs of the wearer. An optional 6-point suspension strap can be added for additional comfort and fit. This comfortable suspension sits lower on the head to reduce pressure points and increase security, especially when looking up and bending down. A smooth, easy-turning ratchet suspension allows for simple adjustments. A 3-level height adjustment allows workers to customize the fit. The perforated, absorbent brow pad provides enhanced comfort

Besides head protection, full brim hard hats offer extra shielding from the sun, splashes, rain, sleet, and snow for enhanced comfort. Full brim hard hats are often preferred in hot and sunny locations because of the extra shading they provide. A hardhat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, utilities, forestry, and mining.

This non-vented hard hat meets requirements of ANSI/ISEA Z89.1-2009 Type 1, Class C, G and E. The high visibility orange and high visibility yellow colored hard hats meet ANSI Z89.1-2009 High Visibility Performance requirements.

The rigid shell of the 3M™ Hard Hat H-800 Series helps reduce chances of injury by deflecting small falling objects from striking the head of the person who wears this protective headgear. The hard hat also helps protect from injuries due to bumping into stationary objects such as pipes, rods, shafts, construction timbers, branches, or exposed electrical conductors. The suspension system inside the hard hat helps absorb the effects of the impact to dissipate the force. Even small objects can cause significant injury due to the force built up from the momentum of falling. Something as small as a washer or coin can strike with the force of several pounds if it falls far enough. 3M hard hats reduce the impact if a strike occurs.

Suspension Assembly Instructions

Watch the simple-assembly video to see how easily the 3M Ratchet Suspension System inserts into the shell. Video is found at the top of the page under the large hard hat photo. Simply click on video image to view.

For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. The Personal Safety Division products, focused on worker safety, include respirators, hearing-protection products, air-monitoring devices, environmental-safety products, and comprehensive training programs. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

• Impact resistant, ANSI Type I hard hat wears lightweight and comfortable on the head
• Comfortable suspension sits lower on head to reduce pressure points
• 4-point ratchet suspension with three position height adjustment allows for customized fit
• Smooth, easy turning ratchet suspension is easy to adjust
• Absorbent brow pad adds cushioned, ventilated comfort
• Meets requirements of ANSI/ISEA Z89.1-2014 Type I, Class G and E

User questions & answers

Question:	Is this a light tan or more of a dark
Answer:	No, it does not come with the parts to facilitate side discharge.
Question:	Does this come with the ratchet suspension? A lot of people have commented that it is missing
Answer:	That is what it was for but now (that's a picture of an older model) the new ones HRS216VKA (which is what I received about a month ago after ordering this one) have the speed control at the center of the handle that you control with your thumb.

Product features

3M H-800 Series Full Brim Hard Hat with Ratchet Suspension System

3M H-800 Series Full Brim Hard Hat with Ratchet System is comfortable, tough and lightweight protective headgear that helps protect the head from small falling objects and fixed objects that may be bumped into. The 4-point suspension system has unique features that allows for a customized height and fit that best suits the individual needs of the wearer. An optional 6-point suspension strap can be added for additional comfort and fit. This comfortable suspension sits lower on the head to reduce pressure points and increase security, especially when looking up and bending down. A smooth, easy-turning ratchet suspension allows for simple adjustments. A 3-level height adjustment allows workers to customize the fit. The perforated, absorbent brow pad provides enhanced comfort.

Besides head protection, full brim hard hats offer extra shielding from the sun, splashes, rain, sleet, and snow for enhanced comfort. Full brim hard hats are often preferred in hot and sunny locations because of the extra shading they provide. A hardhat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, utilities, forestry, and mining.

This non-vented hard hat meets requirements of ANSI/ISEA Z89.1-2009 Type 1, Class C, G and E. The high visibility orange and high visibility yellow colored hard hats meet ANSI Z89.1-2009 High Visibility Performance requirements.

The rigid shell of the 3M Hard Hat H-800 Series helps reduce chances of injury by deflecting small falling objects from striking the head of the person who wears this protective headgear. The hard hat also helps protect from injuries due to bumping into stationary objects such as pipes, rods, shafts, construction timbers, branches, or exposed electrical conductors. The suspension system inside the hard hat helps absorb the effects of the impact to dissipate the force. Even small objects can cause significant injury due to the force built up from the momentum of falling. Something as small as a washer or coin can strike with the force of several pounds if it falls far enough. 3M hard hats reduce the impact if a strike occurs.

For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. The Personal Safety Division products, focused on worker safety, include respirators, hearing-protection products, air-monitoring devices, environmental-safety products, and comprehensive training programs. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

3M personal protective equipment sold through Amazon's Industrial and Scientific Department is only intended for US occupational workplace use. This 3M personal protective equipment must be used in compliance with the Occupational Safety and Health Administration (OSHA) Personal Protective Equipment (PPE) standard (29 CFR 1910.132) and all other applicable health and safety standards, as well as all user instructions, warnings and limitations accompanying each product. It is essential that all product user instructions and government regulations on the use of each product be followed in order for the product to help protect the wearer. Misuse of personal protective equipment may result in injury, sickness, or death. For correct product selection and use, individuals should consult their on-site safety professional or industrial hygienist. For additional product information, visit our official site.

Product description

3M Hard Hat H-700 Series have a tough, durable shell and adjustable suspension system that work together to help absorb the impact of small falling objects and help protect workers from bumping into fixed objects. The suspension sits lower on the head to help reduce pressure and increase security. Featuring a four-point ratchet suspension system, these hard hats are adjustable, delivering a comfortable, secure fit that helps reduce discomfort and slippage. Soft brow pads cushion the forehead and are removable for easy replacement. 3M Uvicator sensor lets wearer know when to replace hard hat due to UV exposure. Vents built into the hard hat help release heat buildup and allow air circulation to enhance the comfort of the worker. Vented hard hat versions meet the ANSI Z89.1 Class C for non-electrical applications. For added versatility, the hard hat features accessory slots to accommodate 3M’s cap mounted ear-muffs, headgear, face shields, and welding helmets (all sold separately). The 3M Hard Hat is designed for industrial applications with personal protective equipment (PPE) compatibility in mind. Disclaimer:  3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

• REDUCES PRESSURE POINTS: 3M’s unique, lightweight shell sits lower on the head to reduce pressure points and increase security.
• ADJUSTABLE COMFORT: Featuring a four-point ratchet suspension system, it is adjustable, delivering a comfortable, secure fit that helps reduce discomfort and slippage.
• VENTED: Vents built into the hard hat help release heat buildup and allow air circulation to enhance the comfort of the worker.
• UV INDICATOR: Proprietary UV indicator lets wearer know when to replace helmet due to UV exposure.
• UPWARD VISIBILITY: Reverse donning eliminates the brim and can help enhance upward visibility.
• INSTALL SUSPENSION: 3M Hard Hats are shipped with suspension uninstalled to prevent distortion during shipping. It must be correctly installed according to the instructions to provide maximum protection.
• ANSI Z89.1: Meets the ANSI Z89.1 Class C for non-electrical applications.
• For industrial/occupational use only. Not for consumer sale or use.

User questions & answers

Question:	How many vents are there
Answer:	No
Question:	is it have a chin strip
Answer:	Which Pins? For Driveshaft then No?
Question:	is it have a chin strip
Answer:	No. The speed is set and you cannot increase it or decrease it. This is a very good mower; I have mowed two seasons with mine and the throttle speed has not been as issue. It starts on the first pull and has a very nice cut. I would buy it again.
Question:	Are there sizes to this hat
Answer:	Yes it can be pulled backwards

Product features

STEP 1

Turn hard hat shell upside down on its crown and place the suspension in the hard hat with the brow pad towards the front brim of the hard hat

STEP 2

Fold one suspension key out and up.

STEP 3

Slide suspension key into slot as shown.

STEP 4

Press key fully into slot. Repeat for other three suspension keys.

STEP 5

Note that suspension webbing may be tight initially upon installation of the keys – push down at the center cross with your fist to ensure all clips are secured and webbing is ready to be worn.

STEP 6

Completed assembly.

Product description

Protective full brim hard hat with vents and comfortable 4 point ratchet suspension and standard brow pad. Available in several colors. Meets requirements of ANSI/ISEA Z89.1 2014 Type I, Class C.

From the Manufacturer

3M H-800 Series Full Brim Vented Hard Hat with Ratchet System is comfortable, tough and lightweight protective headgear that helps protect the head from small falling objects and fixed objects that may be bumped into. Vents built into the hard hat release heat buildup and allow air circulation to enhance comfort of the worker. The cooling effect of air circulation helps reduce perspiration in hot and humid working environments. The 4-point suspension system has unique features that allow for a customized height and fit that best suits the individual needs of the wearer. An optional 6-point suspension strap can be added for additional comfort and fit. The comfortable suspension sits lower on the head to reduce pressure points and increase security, especially when looking up and bending down. A smooth, easy-turning ratchet suspension allows for simple adjustments. A 3-level height adjustment allows workers to customize the fit. The perforated, absorbent brow pad provides enhanced comfort

Besides head protection, full brim hard hats offer extra shielding from the sun, splashes, rain, sleet, and snow for enhanced comfort. Full brim hard hats are often preferred in hot and sunny locations because of the extra shading they provide. A hardhat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, utilities, forestry, and mining.

This vented hard hat meets requirements of ANSI/ISEA Z89.1-2009 Type 1, Class C. The high visibility orange and high visibility yellow colored hard hats meet ANSI Z89.1-2009 High Visibility Performance requirements.

The rigid shell of the 3M™ Hard Hat H-800 Series helps reduce chances of injury by deflecting small falling objects from striking the head of the person who wears this protective headgear. The hard hat also helps protect from injuries due to bumping into stationary objects such as pipes, rods, shafts, construction timbers, branches, or exposed electrical conductors. The suspension system inside the hard hat helps absorb the effects of the impact to dissipate the force. Even small objects can cause significant injury due to the force built up from the momentum of falling. Something as small as a washer or coin can strike with the force of several pounds if it falls far enough. 3M hard hats reduce the impact if a strike occurs.

Suspension Assembly Instructions

Watch the simple-assembly video to see how easily the 3M Ratchet Suspension System inserts into the shell. Video is found at the top of the page under the large hard hat photo. Simply click on video image to view.

For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Occupational Health and Environmental Safety products, focused on worker safety, include respirators, hearing-protection products, air-monitoring devices, environmental-safety products, and comprehensive training programs. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

Note :  The 4 point suspension system is not installed on the helmet and needs to be installed by the consumer when received.

• Impact resistant, ANSI Type I hard hat wears lightweight and comfortable on the head
• Comfortable suspension sits lower on head to reduce pressure points
• Smooth, easy turning ratchet suspension is easy to adjust
• 4-point ratchet suspension with three position height adjustment allows for customized fit
• Vents allow air circulation to keep worker cooler and more comfortable
• Meets requirements of ANSI/ISEA Z89.1-2014 Type I, Class C

User questions & answers

Question:	Is the brim wider in the back or is it the same width all around
Answer:	I would check with a local dealer who services Snapper. I have had a replacement order for the side grass deflector pending since May, with no luck yet in mid September. I would not have ordered this mower had I known getting replacement parts would be such a hassle. Good luck
Question:	Do the vented hard hats leak water in any way when it rains
Answer:	Yes, this mower can be used to mulch or bag leaves.
Question:	What type of rachet do you guys recommend for this helmet
Answer:	Yes
Question:	Is there a replacement harness that you can order
Answer:	Came with the retainers but no pins

Product features

3M H-800 Series Full Brim Vented Hard Hat with Ratchet System

3M H-800V Series Full Brim Vented Hard Hat with Ratchet System is comfortable, tough and lightweight protective headgear that helps protect the head from small falling objects and fixed objects that may be bumped into. Vents built into the hard hat release heat buildup and allow air circulation to enhance comfort of the worker. The cooling effect of air circulation helps reduce perspiration in hot and humid working environments. The 4-point suspension system has unique features that allow for a customized height and fit that best suits the individual needs of the wearer. An optional 6-point suspension strap can be added for additional comfort and fit. The comfortable suspension sits lower on the head to reduce pressure points and increase security, especially when looking up and bending down. A smooth, easy-turning ratchet suspension allows for simple adjustments. A 3-level height adjustment allows workers to customize the fit. The perforated, absorbent brow pad provides enhanced comfort.

Besides head protection, full brim hard hats offer extra shielding from the sun, splashes, rain, sleet, and snow for enhanced comfort. Full brim hard hats are often preferred in hot and sunny locations because of the extra shading they provide. A hardhat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, utilities, forestry, and mining.

This vented hard hat meets requirements of ANSI/ISEA Z89.1-2009 Type 1, Class C. The high visibility orange and high visibility yellow colored hard hats meet ANSI Z89.1-2009 High Visibility Performance requirements.

The rigid shell of the 3M Hard Hat H-800 Series helps reduce chances of injury by deflecting small falling objects from striking the head of the person who wears this protective headgear. The hard hat also helps protect from injuries due to bumping into stationary objects such as pipes, rods, shafts, construction timbers, branches, or exposed electrical conductors. The suspension system inside the hard hat helps absorb the effects of the impact to dissipate the force. Even small objects can cause significant injury due to the force built up from the momentum of falling. Something as small as a washer or coin can strike with the force of several pounds if it falls far enough. 3M hard hats reduce the impact if a strike occurs.

For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Occupational Health and Environmental Safety products, focused on worker safety, include respirators, hearing-protection products, air-monitoring devices, environmental-safety products, and comprehensive training programs. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

3M personal protective equipment sold through Amazon's Industrial and Scientific Department is only intended for US occupational workplace use. This 3M personal protective equipment must be used in compliance with the Occupational Safety and Health Administration (OSHA) Personal Protective Equipment (PPE) standard (29 CFR 1910.132) and all other applicable health and safety standards, as well as all user instructions, warnings and limitations accompanying each product. It is essential that all product user instructions and government regulations on the use of each product be followed in order for the product to help protect the wearer. Misuse of personal protective equipment may result in injury, sickness, or death. For correct product selection and use, individuals should consult their on-site safety professional or industrial hygienist. For additional product information, visit website.

Product description

The PELTOR X-Series earmuffs are 3M’s latest advancement in hearing conservation. New technologies in comfort, design and protection all come together in this groundbreaking earmuff line. The X1P3E is a lightweight, low-profile ear muff designed to attach to your hard hat and provide protection against low-to-moderate level industrial noise. The X1P3E utilizes a newly designed spacer, specially formulated foam liners and innovative ear cushions to help improve attenuation. When correctly selected and worn, these products help reduce exposure to hazardous levels of noise. The 3M PELTOR X Series earmuffs are ideal for protection against noise arising from a wide range of applications in the workplace. Examples of typical applications include: metal processing, automotive, airports, construction, textile manufacturing, chemical and pharmaceutical manufacturing, cement manufacturing, printing, woodworking, heavy engineering, foundry, steelworks, and mining and quarrying. Also available in a electrically insulated (dielectric) wire headband model: 3M PELTOR X1A Over-the-Head Ear Muffs. The 3M PELTOR HYX1 Hygiene Kit offers replaceable ear cushions and foam liners to help keep your earmuffs clean and extend the service life. Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert. *3M strongly recommends fit testing of hearing protectors. Research suggests that many users will receive less noise reduction than indicated by the NRR due to variation in hearing protector fit, fitting skill, and motivation of the user. If the NRR is used, 3M recommends that it be reduced by 50% or in accordance with applicable regulations. 3M PSD products are for occupational use only.

• 21 dB NOISE REDUCTION RATING: Ear muffs attach to a hard hat (sold separately) and provide hearing protection with a NRR of 21 dB for low to moderate noise exposures
• ADVANCED TECHNOLOGIES: New innovative foam earcup inserts and spacers help improve attenuation along with new ear cushion foam technology for an effective acoustic seal and reliable protection
• COMFORTABLE: Wide, soft foam ear cushions and earcup tilting pivot points (position for use, stand-by, or storage) designed for high comfort and an effective acoustic seal with the head
• DURABLE: ABS plastic cups create a rigid, high-strength and impact-resistant earmuff to handle tough environments.Material type:Thermoplastic
• REPLACEABLE CUSHIONS and inserts help keep them clean: 3M PELTOR HYX1 Hygiene Kit
• Industrial/occupational use only, Not for consumer sale or use

User questions & answers

Question:	Will these fit a stihl forestry hard hat
Answer:	This style is made in Bangladesh.
Question:	Will these work on a Tasco helmet
Answer:	After repeated wearing during hot weather, your sweat will soak through depending on how much you sweat. My hat showed sweat stains round the hatband and I washed it. It looks new again and I continue to wear it anytime I'm outside in the sun.
Question:	Will this fit my msa v hardhat
Answer:	mine haven't rusted yet. i got mine in September 2018.
Question:	Will this fit a full brim hard hat
Answer:	Just right !

Product features

Figure 1

Insert the hard hat slot adapters into the slots on each side of the hard hat until they click into place.

Figure 2

When in use, the attachment arms must be pushed inward until you hear a click on both sides, indicating a shift from “stand-by” to “usage” position. Position the ear cups over your ears so that the cushions fully enclose the ears and seal tightly against the head. Adjust the position of each ear cup while holding the helmet in place until you have a tight and comfortable fit that exerts even pressure around the ears.

Figure 3

Usage position. Make sure the cups and attachment arms are not in contact with the inner lining or the edge of the hard hat when in the “usage” position, otherwise this may lead to leakage.

Figure 4

Stand-by position

Product description

3M Hard Hat H-700 Series have a tough, durable shell and adjustable suspension system that work together to help absorb the impact of small falling objects and help protect workers from bumping into fixed objects. The suspension sits lower on the head to help reduce pressure and increase security. Featuring a four-point ratchet suspension system, these hard hats are adjustable, delivering a comfortable, secure fit that helps reduce discomfort and slippage. Soft brow pads cushion the forehead and are removable for easy replacement. 3M Uvicator sensor lets wearer know when to replace hard hat due to UV exposure. Vents built into the hard hat help release heat buildup and allow air circulation to enhance the comfort of the worker. Vented hard hat versions meet the ANSI Z89.1 Class C for non-electrical applications. For added versatility, the hard hat features accessory slots to accommodate 3M’s cap mounted ear-muffs, headgear, face shields, and welding helmets (all sold separately). The 3M Hard Hat is designed for industrial applications with personal protective equipment (PPE) compatibility in mind. Disclaimer:  3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use.  Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice.  Misuse of 3M industrial and occupational products may result in injury, sickness, death, or property damage.  For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

• REDUCES PRESSURE POINTS: 3M’s unique, lightweight shell sits lower on the head to reduce pressure points and increase security.
• ADJUSTABLE COMFORT: Featuring a four-point ratchet suspension system, it is adjustable, delivering a comfortable, secure fit that helps reduce discomfort and slippage.
• VENTED: Vents built into the hard hat help release heat buildup and allow air circulation to enhance the comfort of the worker.
• UPWARD VISIBILITY: Reverse donning eliminates the brim and can help enhance upward visibility.
• INSTALL SUSPENSION: 3M Hard Hats are shipped with suspension uninstalled to prevent distortion during shipping. It must be correctly installed according to the instructions to provide maximum protection.
• ANSI Z89.1: Meets the ANSI Z89.1 Class C for non-electrical applications.
• For industrial/occupational use only. Not for consumer sale or use.

User questions & answers

Question:	Does it have opening on the side to zip tie a headlight
Answer:	The handle is adjustable in the sense that it can be folded over the mower. If you're inquiring about the handles telescoping to be longer/shorter, unfortunately they cannot.
Question:	I see one of the reviews that it came with no insert just an empty shell. was this just an error or is that what you get. Also is weight 9.6oz right
Answer:	This mower (model 1688022) does have a brushless motor.

Product features

STEP 1

Turn hard hat shell upside down on its crown and place the suspension in the hard hat with the brow pad towards the front brim of the hard hat

STEP 2

Fold one suspension key out and up.

STEP 3

Slide suspension key into slot as shown.

STEP 4

Press key fully into slot. Repeat for other three suspension keys.

STEP 5

Note that suspension webbing may be tight initially upon installation of the keys – push down at the center cross with your fist to ensure all clips are secured and webbing is ready to be worn.

STEP 6

Completed assembly.

Product description

Protective full brim hard hat with vents, comfortable 4 point ratchet suspension, standard brow pad and Uvicator Sensor. Available in several colors. Meets requirements of ANSI/ISEA Z89.1 2014 Type I, Class C

From the Manufacturer

3M™ H-800 Series Full Brim Vented Hard Hat with Uvicator™ Sensor and Ratchet Suspension System is comfortable, tough and lightweight protective headgear that helps protect the head from small falling objects and fixed objects that may be bumped into. This hard hat comes with a Uvicator sensor that changes color as the hard hat is exposed to UV light. The sun’s UV rays can cause a hard hat shell to become brittle and compromise its ability to protect the wearer. With the Uvicator sensor, the hard hat should be replaced when the sun smart sensor changes from red to white. Vents built into the hard hat release heat buildup and allow air circulation to enhance comfort of the worker. The cooling effect of air circulation helps reduce perspiration in hot and humid working environments. The 4-point suspension system has unique features that allow for a customized height and fit that best suits the individual needs of the wearer. An optional 6-point suspension strap can be added for additional comfort and fit. The comfortable suspension sits lower on the head to reduce pressure points and increase security, especially when looking up and bending down. A smooth, easy-turning ratchet suspension allows for simple adjustments. A 3-level height adjustment allows workers to customize the fit. The perforated, absorbent brow pad provides enhanced comfort

Besides head protection, full brim hard hats offer extra shielding from the sun, splashes, rain, sleet, and snow for enhanced comfort. Full brim hard hats are often preferred in hot and sunny locations because of the extra shading they provide. A hardhat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, utilities, forestry, and mining.

This vented hard hat meets requirements of ANSI/ISEA Z89.1-2009 Type 1, Class C. The high visibility orange and high visibility yellow colored hard hats meet ANSI Z89.1-2009 High Visibility Performance requirements.

The rigid shell of the 3M™ Hard Hat H-800 Series helps reduce chances of injury by deflecting small falling objects from striking the head of the person who wears this protective headgear. The hard hat also helps protect from injuries due to bumping into stationary objects such as pipes, rods, shafts, construction timbers, branches, or exposed electrical conductors. The suspension system inside the hard hat helps absorb the effects of the impact to dissipate the force. Even small objects can cause significant injury due to the force built up from the momentum of falling. Something as small as a washer or coin can strike with the force of several pounds if it falls far enough. 3M hard hats reduce the impact if a strike occurs.

Suspension Assembly Instructions

Watch the simple-assembly video to see how easily the 3M Ratchet Suspension System inserts into the shell. Video is found at the top of the page under the large hard hat photo. Simply click on video image to view.

For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Occupational Health and Environmental Safety products, focused on worker safety, include respirators, hearing-protection products, air-monitoring devices, environmental-safety products, and comprehensive training programs. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

• Impact resistant, ANSI Type I hard hat wears lightweight and comfortable on the head
• Meets requirements of ANSI/ISEA Z89.1-2014 Type I, Class C
• Comfortable suspension sits lower on head to reduce pressure points
• 4-point ratchet suspension with three position height adjustment allows for customized fit
• Uvicator sensor shows when it’s time to replace hard hat due to UV exposure
• Vents allow air circulation to keep worker cooler and more comfortable

User questions & answers

Question:	I have extra large head, baseball cap size 7 3/4", will hard hat fix my large head
Answer:	I have not been able to attwch earmuffs of a faceshield this hat is not designed for that
Question:	Is that red dot supposed to be in the front or back
Answer:	The inner band is easily adjusted to fit any size. I have about a 7.25 hat size and I can make it large enough to fit it over a baseball hat or a stretch knit hat for when it's cold out (like today!). It should easily fit a 7.75. The adjustment is very simple and takes just a fraction of a second.
Question:	recommend a face shield that fits? thanks
Answer:	Yes. There's a single middle strap that you can get separately. The middle strap clips in and runs from side to side inside the hard hat.

Product features

3M H-800 Series Full Brim Vented Hard Hat w Uvicator Sensor & Ratchet Suspension

3M H-800V-UV Series Full Brim Vented Hard Hat with Uvicator Sensor and Ratchet Suspension System is comfortable, tough and lightweight protective headgear that helps protect the head from small falling objects and fixed objects that may be bumped into. This hard hat comes with a Uvicator sensor that changes color as the hard hat is exposed to UV light. The sun’s UV rays can cause a hard hat shell to become brittle and compromise its ability to protect the wearer. With the Uvicator sensor, the hard hat should be replaced when the sun smart sensor changes from red to white. Vents built into the hard hat release heat buildup and allow air circulation to enhance comfort of the worker. The cooling effect of air circulation helps reduce perspiration in hot and humid working environments. The 4-point suspension system has unique features that allow for a customized height and fit that best suits the individual needs of the wearer. An optional 6-point suspension strap can be added for additional comfort and fit. The comfortable suspension sits lower on the head to reduce pressure points and increase security, especially when looking up and bending down. A smooth, easy-turning ratchet suspension allows for simple adjustments. A 3-level height adjustment allows workers to customize the fit. The perforated, absorbent brow pad provides enhanced comfort.

Besides head protection, full brim hard hats offer extra shielding from the sun, splashes, rain, sleet, and snow for enhanced comfort. Full brim hard hats are often preferred in hot and sunny locations because of the extra shading they provide. A hardhat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, utilities, forestry, and mining.

This vented hard hat meets requirements of ANSI/ISEA Z89.1-2009 Type 1, Class C. The high visibility orange and high visibility yellow colored hard hats meet ANSI Z89.1-2009 High Visibility Performance requirements.

The rigid shell of the 3M Hard Hat H-800 Series helps reduce chances of injury by deflecting small falling objects from striking the head of the person who wears this protective headgear. The hard hat also helps protect from injuries due to bumping into stationary objects such as pipes, rods, shafts, construction timbers, branches, or exposed electrical conductors. The suspension system inside the hard hat helps absorb the effects of the impact to dissipate the force. Even small objects can cause significant injury due to the force built up from the momentum of falling. Something as small as a washer or coin can strike with the force of several pounds if it falls far enough. 3M hard hats reduce the impact if a strike occurs.

For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Occupational Health and Environmental Safety products, focused on worker safety, include respirators, hearing-protection products, air-monitoring devices, environmental-safety products, and comprehensive training programs. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

3M personal protective equipment sold through Amazon's Industrial and Scientific.

Product description

Protective full brim hard hat with vents and comfortable 4 point ratchet suspension and standard brow pad. Available in several colors. Meets requirements of ANSI/ISEA Z89.1 2014 Type I, Class C.

From the Manufacturer

3M™ H-800 Series Full Brim Vented Hard Hat with Ratchet System is comfortable, tough and lightweight protective headgear that helps protect the head from small falling objects and fixed objects that may be bumped into. Vents built into the hard hat release heat buildup and allow air circulation to enhance comfort of the worker. The cooling effect of air circulation helps reduce perspiration in hot and humid working environments. The 4-point suspension system has unique features that allow for a customized height and fit that best suits the individual needs of the wearer. An optional 6-point suspension strap can be added for additional comfort and fit. The comfortable suspension sits lower on the head to reduce pressure points and increase security, especially when looking up and bending down. A smooth, easy-turning ratchet suspension allows for simple adjustments. A 3-level height adjustment allows workers to customize the fit. The perforated, absorbent brow pad provides enhanced comfort

Besides head protection, full brim hard hats offer extra shielding from the sun, splashes, rain, sleet, and snow for enhanced comfort. Full brim hard hats are often preferred in hot and sunny locations because of the extra shading they provide. A hardhat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, utilities, forestry, and mining.

This vented hard hat meets requirements of ANSI/ISEA Z89.1-2009 Type 1, Class C. The high visibility orange and high visibility yellow colored hard hats meet ANSI Z89.1-2009 High Visibility Performance requirements.

The rigid shell of the 3M™ Hard Hat H-800 Series helps reduce chances of injury by deflecting small falling objects from striking the head of the person who wears this protective headgear. The hard hat also helps protect from injuries due to bumping into stationary objects such as pipes, rods, shafts, construction timbers, branches, or exposed electrical conductors. The suspension system inside the hard hat helps absorb the effects of the impact to dissipate the force. Even small objects can cause significant injury due to the force built up from the momentum of falling. Something as small as a washer or coin can strike with the force of several pounds if it falls far enough. 3M hard hats reduce the impact if a strike occurs.

Suspension Assembly Instructions

Watch the simple-assembly video to see how easily the 3M Ratchet Suspension System inserts into the shell. Video is found at the top of the page under the large hard hat photo. Simply click on video image to view.

For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Occupational Health and Environmental Safety products, focused on worker safety, include respirators, hearing-protection products, air-monitoring devices, environmental-safety products, and comprehensive training programs. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

• Impact resistant, ANSI Type I hard hat wears lightweight and comfortable on the head
• Comfortable suspension sits lower on head to reduce pressure points
• Smooth, easy turning ratchet suspension is easy to adjust
• 4-point ratchet suspension with three position height adjustment allows for customized fit
• Vents allow air circulation to keep worker cooler and more comfortable
• Meets requirements of ANSI/ISEA Z89.1-2014 Type I, Class C

Product features

3M H-800 Series Full Brim Vented Hard Hat with Ratchet System

3M H-800V Series Full Brim Vented Hard Hat with Ratchet System is comfortable, tough and lightweight protective headgear that helps protect the head from small falling objects and fixed objects that may be bumped into. Vents built into the hard hat release heat buildup and allow air circulation to enhance comfort of the worker. The cooling effect of air circulation helps reduce perspiration in hot and humid working environments. The 4-point suspension system has unique features that allow for a customized height and fit that best suits the individual needs of the wearer. An optional 6-point suspension strap can be added for additional comfort and fit. The comfortable suspension sits lower on the head to reduce pressure points and increase security, especially when looking up and bending down. A smooth, easy-turning ratchet suspension allows for simple adjustments. A 3-level height adjustment allows workers to customize the fit. The perforated, absorbent brow pad provides enhanced comfort.

Besides head protection, full brim hard hats offer extra shielding from the sun, splashes, rain, sleet, and snow for enhanced comfort. Full brim hard hats are often preferred in hot and sunny locations because of the extra shading they provide. A hardhat is commonly worn in these industries: heavy and light industrial, construction, oil and gas, road work, utilities, forestry, and mining.

This vented hard hat meets requirements of ANSI/ISEA Z89.1-2009 Type 1, Class C. The high visibility orange and high visibility yellow colored hard hats meet ANSI Z89.1-2009 High Visibility Performance requirements.

The rigid shell of the 3M Hard Hat H-800 Series helps reduce chances of injury by deflecting small falling objects from striking the head of the person who wears this protective headgear. The hard hat also helps protect from injuries due to bumping into stationary objects such as pipes, rods, shafts, construction timbers, branches, or exposed electrical conductors. The suspension system inside the hard hat helps absorb the effects of the impact to dissipate the force. Even small objects can cause significant injury due to the force built up from the momentum of falling. Something as small as a washer or coin can strike with the force of several pounds if it falls far enough. 3M hard hats reduce the impact if a strike occurs.

For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Occupational Health and Environmental Safety products, focused on worker safety, include respirators, hearing-protection products, air-monitoring devices, environmental-safety products, and comprehensive training programs. The 3M brand, across thousands of products, represents consistency, superior quality, and value.

3M personal protective equipment sold through Amazon's Industrial and Scientific Department is only intended for US occupational workplace use. This 3M personal protective equipment must be used in compliance with the Occupational Safety and Health Administration (OSHA) Personal Protective Equipment (PPE) standard (29 CFR 1910.132) and all other applicable health and safety standards, as well as all user instructions, warnings and limitations accompanying each product. It is essential that all product user instructions and government regulations on the use of each product be followed in order for the product to help protect the wearer. Misuse of personal protective equipment may result in injury, sickness, or death. For correct product selection and use, individuals should consult their on-site safety professional or industrial hygienist. For additional product information, visit website.