11 best water leaking detection tool

• Located the leak location: Because the sound frequency of the leak port is different from other places, it quickly determine the leak port, suitable for all types of pressure or vacuum system gases.
• Check the degree of sealing: Adopt the advanced ultrasonic sensor technology to detect leaks of steam and liquid , detect the sealing degree of closed parts, such as cabins, car cockpits, refrigerators and containers.
• Two measurement methods: real-time detection that EM282-R detects leak port by the sound frequency; And non-real-time detection is that EM282-R capture the frequency signal from EM282-T. If there is gas in the pipe or tank, use real-time detection, or use non-real-time detection
• Adjustable sensitivity, frequency response: 40KHz±2KHz, adapt to various degrees of leakage, easy to detect and improve measurement accuracy.
• Ultrasonic testing, fast and accurate, simple to use, green and environmentally friendly. With headphones, indicator lights, beginners can also quickly learn to use.

User questions & answers

Question:	Will this help detect a leak in a hydraulic system
Answer:	Where you buy it varies on warranty, Amazon, Lifeproof , Used or store. They all vary on warranty . And if you bought extra warranty they square Trade.. The question is vague.
Question:	Will this find water leaks
Answer:	It does! We do recommend washing the case off after using it in salt water or chlorinated water, however, just to preserve the longevity of the case.
Question:	Can I put transmitter under shower and test with probe inside?For Checking physical shower unit for water tight seal base/ wall
Answer:	Yes, FRĒ is fully compatible with Qi wireless charging! Drop us a line via our official website if you have any other LifeProof questions or concerns.
Question:	Will this detect small leaks in a compressed air pipe fitting
Answer:	It fits like a glove! Should you have any issues with a LifeProof case, however, don't hesitate to reach out to us at 1-888-533-0735 and one of our reps will gladly help.
Question:	Why is my case disintegrating? Every time I touch the edges by the screen more of the material crumbles
Answer:	I don't think you can use tempered glass protector; unless your glass is cut to only cover the screen area.
Question:	Does it have Belt clips
Answer:	There is no screen protector with the case. I'm not sure if adding a screen protector would make the case non-water proof though as the instructions for installing the case specifically say to remove any screen protectors.
Question:	is this like a girl color
Answer:	If it drops on a flat surface it should protect it. I've dropped mine many times and my screen has been safe. As long as the impact hits the case before it hits your screen you should be safe. If your screen hits first probably not.
Question:	Ordered the wrong case how can I return it’s unopened
Answer:	Have had the case for a week and the mic dampening is really bad. I can not be heard on any calls and also the music playback is muffled

Product features

Ultrasonic Leak Detector & Transmitter with Headphone Accessory Kit

The leak detection tool adopts advanced ultrasonic sensor technology, which can detect and locate the sealing conditions or leak points of scenes such as automobile air conditioning compression system, water tank sealing space, automobile brake system and storage tank; according to the actual detection requirements, the leak detection The tool is equipped with 2 working modes (active mode and passive mode), and the sensitivity and response frequency of the detection tool can be adjusted. It is a quick, accurate and easy-to-use inspection tool.

Working Principle

When gas or air passes through a small hole, turbulence is generated, and the turbulence generates ultrasonic waves. Therefore, when air leaks into the vacuum easily or the pressure vessel leaks into the outside air, ultrasonic waves with strong directivity are generated. This directionality of ultrasonic waves can be used to detect leaks in the sealing system. The frequency of ultrasound is related to the size of the hole through which it passes, but the usual frequency is 40 kHz, so our detection tools can accurately detect leakage.

Applicable Scenarios

It can detect the sound insulation of automobile/truck windows, automobile air conditioning compression systems, wheels, leaks in water tank sealing spaces, automobile braking systems, bearing systems, bearings and lubrication; liquefied gas tankers, refrigerated vehicles, tankers, cargo Boxes, welding bead doors and other scenes.

2 Working Modes

The leak detection tool can use 2 working modes, active mode and passive mode.

Among them, the active mode is mainly used to combine EM282-R and EM282-T when there is no ultrasonic wave that can be used for detection in areas where the leaking gas is not pressurized or pressurized sufficiently. Place the EM282-T ultrasonic transmitter in the sealed area and send ultrasonic waves. Scan the outside of the area with EM282-R. After detecting the ultrasonic waves from the sealed area, you can quickly and accurately detect and locate the leakage point;

Passive mode can detect and locate leaks in pressure and vacuum systems. In this mode, only EM282-R is required.

Package Information (No battery included)

1 x EM282-R Receiver

1 x EM282-T Transmitter

1 x Earphone

1 x English Instruction Manual

1 x Carrying bag

Adjustable sensitivity and response frequency

Adjustable sensitivity, frequency response: 40 kHz±2 kHz, adapt to various degrees of leakage, easy to detect and improve measurement accuracy.

Product description

The Skylink WA-MT Wireless Water Leak Sensor detects leaks in potential flood areas like basements, stairwells, hot water heaters, washing machine or under sinks. Prevent destruction of valuable or costly property damage with a push notification to your Smartphone. The Water Leak Sensor is operated by a single AAA Alkaline Battery (Sold Separately). Compatible with SkylinkNet Connected Home Security Alarm & Home Automation Systems and M-Series.

• Instantly know of a Water Leak to prevent or minimize damage to your home or business.
• Wireless range up to 600 feet in open area (Sensor to HU-100 Internet Hub or M-1 Main Console/Indoor Siren)
• Low battery detection.
• Compatible with SkylinkNet iOS Apple & Android App and M-Series.

User questions & answers

Question:	Does this work with Samsung Samrtthings hub
Answer:	I opened up the sensor and drilled a small hole mounting the unit to the wall - problem solved. Doesn’t interfere with battery replacement
Question:	Does this work with Smartthings
Answer:	No. You need a skylink hub to use any of the sensors.
Question:	Does this require an existing Skylink subscription to use the app
Answer:	i think you can use it outdoors but must careful with rain
Question:	will it send an alert even if the alarm system is not armed
Answer:	Not sure. I believe they only are designed for interior use.moisture could be a real problem

• Reverse Osmosis Water Filter: Experience what water should taste like with the Express Water reverse osmosis water filtration system reducing up to 99.99% of Lead, Chlorine, Fluoride, Nitrates, Calcium, Arsenic, and moreAlkaline Water Filter: Alkaline Filtration System with Active Mineral Technology adds Calcium, Potassium, Magnesium, and other minerals to your body needs right in your water
• Under Sink Water Filter: Don’t waste money on professional installation. Express Water’s quick and easy-to-understand design means you can install and understand everything about your new water filtration systemUnder Sink Water Filter System: No need to mess with refilling or activating your Alkaline UV water filter system, Express Water’s water filtration systems automatically fill your water tank with high quality drinking water
• Sediment Water Filter: Keep the most damaging sediments out of your drinking water and protect your other filters from coarse contaminants including rust, sand, dirt and silt.Activated Carbon Block Filter: Made with 100% laboratory vacuum heated, cleaned coconut husk carbon, Express Water carbon block filters reduce chlorine, VOC, bad tastes, odors, cloudiness, and industrial solvents
• Pre-Carbon Filter: Granular Activated Carbon block water filter protects your system from chlorine damage and reduces volatile organic chemicals from your water.Post-Carbon Water Filter: As the final stage of filtration in your system, the Post Activated Carbon water filter reduces any remaining contaminants while enhancing the flavor of drinking water.
• Leak Detection: Each under sink water filter includes an emergency leak stop detector that shuts off water flow when it detects unwelcomed moistureOn Demand Support: Support from experts who can answer any of your questions about your new water filter. All reverse osmosis systems come with a 1–year warranty

User questions & answers

Question:	does the UV power plug require a separate outlet from the garbage disposal outlet
Answer:	Yes, the disposal outlet is switched with the switch near the sink. You need one that has constant power. Maybe the Dishwasher?
Question:	What's the difference between roalkuv10dcg (this unit) and roalkuv10m
Answer:	The difference is this system ROALKUV10DCG comes with a Deluxe Chrome Faucet, Transparent Filter Housing and Pressure Gauge (DCG) and ROALKUV10M comes with a Modern Chrome Faucet and White Filter Housing.
Question:	What's the shipping box dimensions
Answer:	I do not remember. You may be able to find that information, on the company's website.
Question:	How can you tell when the filters need changing
Answer:	Dear Valued Our recommendation is to change the 3 bottom filter every 6 months, post filter on the top every 12 months and the membrane every 12 to 24 monthsThese timings are good for the family of 4 if more than 4 people are using the water maybe you need to do it sooner than the recommended timingPlease Note:This timing is recommendation only, actual timing may vary depending on the quality of the incoming water and the number of people who use the waterBest Regards

Product features

Start Drinking Safe and Healthy

Start drinking clean healthy water with the minerals you need (like Calcium, Magnesium and Potassium). Other filters send the essential minerals your body needs down the drain giving you unnatural water with no minerals. We include 5 stages of mineralization in our water.

Keep your energy up and recover faster with antioxidants and increased oxygen levels in your water. RO Alkaline water features higher pH than a water ionizer can produce to help balance your water.

With powerful UV-C Disinfection, right in your home, you can ensure your water is always free from microorganisms. the UV light is equipped with a warning light that will alert you when the power of the UV falls below the germicidal range. UV light kills and prevents bacteria, microorganisms, viruses, and other life from replicating by destroying their DNA.

Stop Drinking Contaminants

Reverse Osmosis filtering removes the most difficult contaminants that other filtration methods miss.

Remove up to 99.99% of major contaminants in tap water! Pesticides, Lead, Chlorine, Fluoride, Microorganisms, Mold, Algae, Fungi, Arsenic, Cadmium, Chromium, Herbicides, Hydrocarbons, Turbidity, Hardness, Phosphate, Pyrogens, Giardia, Heavy Metals, Sulfate, Viruses, Rust, Sand, Dirt, Dust, Cyanide, Total Dissolved Solids (TDS), and more!

Unique Features

Express Water offers several features unique to this system

• Double Sealed Filters to preserve your filters. Each filter is double sealed to provide the best filtration efficiency and value
• Our Leak Stop Valve shuts off water flow if excess water is detected
• Included Brass Feed Adapter and Quick Connect Adapter fits the two most common sizes of under sink pipes 1/2" and 3/8"
• Our RO Membrane is rated for more contaminant reduction than other home systems

Save Your Time

Filter changes are quick and easy with simple design and clear labels

• Your pre-filters are swapped out only twice a year: Sediment, Carbon Block, Granular Activated Carbon
• The others are replaced only once a year: RO Membrane, Post Carbon, Alkaline
• Our Quick Connect system is fast, easy, and helps prevent leaks
• A labeled color matched system so you know what goes where at a glance

Water When You Need It

With efficient filtration and quick delivery get your water fast.

• Chrome faucet with brass water way for pure water delivery
• Fast Flow Rate: Get your water fast. Water through your faucet at 0.8 GPM!
• Always Ready: This system can produce 100 gallons of pure water a day
• An adult should drink 0.5-1.55 gallons of water a day. Makes more than enough water for the whole family!

11 Stages of Pure

Express Water’s 1st stage is a Sediment filter which helps filter dirt, dust, sand, and rust.

The 2nd and 3rd stages are ACB and GAC Carbon Filters which focus on pollutants like chlorine, VOCs, and odors.

These early stages help extend the life of the 4th stage, the RO Membrane. The Membrane focuses on the most difficult contaminants like lead, arsenic, chromium, fluoride, TDS, and others.

The 5th-9th stages are our Alkaline Filter which adds 5 stages of mineralization, antioxidants, and oxygen to your water. One for each Active Mineral stage your water flows through.

The 10th stage is the UV Sterilizer. The UV removes up to 99% of E.Coli, Bacteria, and Microorganisms even from well water.

The 11th stage is a PAC Filter which does a final pass on your water, right before it comes through the faucet, removing any possible taste or odor.

The combination of these stages that’s given countless customers water purer than bottled water straight from their faucet.

Fully Upgradeable

Every Express Water Water System is fully upgradable and customizable. With standard quick connect fittings it’s easy to add to or change your system to fit your needs.

When you move to a new place or if an earthquake or storm affects the local water your filtration needs may change.

Even if your water changes you can keep your RO System. With our simple design you can add or remove filters in minutes.

Proven Quality

Our tests are tougher than you ever could be

• Air Jet: Every system is checked for leaks by an air injection pressure test
• Water Pressure: Each component undergoes intense high water pressure tests to ensure durability
• Cycle Resistance: Systems undergo simulated heavy use to make sure they can handle anything

• Leak Stop Valve: Enjoy peace of mind with your under sink reverse osmosis water filtration system with the help from Express Water’s leak stop valve.Fast Acting: This water valve is designed to shut off incoming water supply as soon as any moisture is detected.
• Multi-Use Leak Detection Valve: The leak stop valve is compatible with any system and application. Use this water valve on Reverse Osmosis Systems, ATO, Coffee Machine, Water Filtration System, Ice Maker, Refrigerator Kit, Water Purifiers, and More
• Easy to Install Shut Off Valve: Express Water’s leak stop valves designed to universal standard size and are easy to install with your water filtration system with quick-connect ¼” fittings. Included Components: Express Water leak stop valves come with 2 mounting screws for easy installation and 3 leak detection pads for multiple uses of your leak detection valve
• Make The Reliable Choice: Express Water water leak valves are made to last. Choose the system that lasts longer to give you the best value.Save Time and Money: Invest in quality accessories for your Express Water Filtration Systems to efficiently and effectively filter your water.
• On Demand Support: Support from experts who can answer any of your questions about your water shut off valve.

User questions & answers

Question:	Where do I buy replacement expansion tablets for the valve
Answer:	For sure real deal. But my only complaint is that the charge port lets stuff in if you have it on the charger because of a latch you open to do so.
Question:	For an under sink filter system, does this include any tubing in case your feed supply line is too short to splice device into
Answer:	Well it tells you what it’s for. It fits my phone. Soooo the size of an iPhone XS Max
Question:	My tubing is 3/8, would this valve work
Answer:	Yes
Question:	Anyone have any experience of this shutoff device actually successfully shuting off the water after leaked developed, preventing flooding
Answer:	Yes it does

Product features

The Quality Choice

Choose the easy way to protect your home with Express Water’s automatic leak detection and water shut down valve. With two extra detection pads this is designed to last. When water comes into contact with the detection pad, the pad expands thus clicking the stop valve into place and preventing any additional water from flowing into your leaking water filter or appliance. Save your kitchen and your home from costly accidents!

Universal Filtration Fully compatible protection for any water system! Compatible with systems from: Express Water Culligan 3M Aqua-Pure GE APEC Pentek Whirlpool Global Water DuPont Costway Olympia Glacier Bay Smart Aqua Life Geekpure Aquasana US Aqua The Perfect Water All mentions of brand names or model descriptions are made strictly to illustrate compatibility.

Specifications

Leak Stop Valve Connection: ¼” Quick Connect

Material: Polypropylene Temperature: 33°F - 140°F Dimensions: 3 ⅛” x 1 ¾” x 1 ¼” Pad Size: ⅝” diameter

Components: leak stop valve, 2 mounting screws, 3 leak detection pads

Product description

The Flume 2 Smart Home Water Monitor is changing the way we consume water by giving you the ability to manage, monitor, and conserve the world's most precious resource. Take control of your water usage and bring quirky facts to the backyard barbecue with real-time water usage monitoring. Flume pinpoints your indoor versus outdoor use with down-to-the-minute, source-specific, water use reports and insights. Powerful water leak detection technology is always onguard alerting you to potentially costly and damaging leaks before they occur. Reduce your water bill and take the guessing game out of your water usage by setting daily, weekly or monthly budgets to save water and money. Not sure where to start? Flume will automatically suggest water use budgets based off of your water data to maximize your savings and reduce waste. Set up and install Flume in the time it takes you to brew your Sunday pot of coffee. No pipe cutting. No wiring. No appointments. No plumbers. With the power of Flume, you will save water, save money and protect your entire property from leaks whether home or away. Get your water data on your favorite smart devices with our iOS and Android apps. Flume is Alexa enabled to bring an extra level of convenience to your household.

• 24/7 SMART WATER LEAK DETECTION: Flume's smart water leak detection technology is always on guard alerting you to water leaks inside the home as well as in your lawn or garden. Gain peace of mind whether you're at home or away with water leak alerts delivered directly to your phone via the Flume Water app. Stop water leaks and protect your home today with Flume.
• REAL-TIME SMART WATER USAGE MONITORING: Dig up the details your standard water bill doesn’t with Flume's real-time smart water monitoring technology. Flume delivers down to the one-hundredth of a gallon water use insight data directly to your smartphone so you're always in the know. Take the guessing game out of your water usage and take control to reduce waste and conserve water.
• REDUCE & MANAGE YOUR WATER BILL: A smart water monitor that pays for itself. Flume allows you to be proactive about managing your water usage by protecting the planet and your pockets. Create daily, weekly or monthly water use budgets that use smart alerts to notify you of potential water leaks and waste. Flume has helped customers save an average of 10-20% per month on their water bill.
• GET TO KNOW YOUR WATER INSIDE AND OUT: Flume pinpoints and displays your indoor versus outdoor use with down to the minute, source-specific, water use reports and insights. Now you can know exactly how much water your sprinkler system uses to create a smarter sprinkler schedule.
• INSTALLS IN MINUTES. NO PLUMBING REQUIRED: The Flume Smart Home Water Monitor is compatible with 95% of homes and installs in minutes. No pipe cutting, no wiring, no appointments. You've got it covered, but we're here if you need us.

User questions & answers

Question:	What's the return policy on Flume 2 if it doesn't work for me
Answer:	JD 5.0 out of 5 starsThis unit can send text messages to phones too! December 30, 2017 Size: 1 Pack|Style: WiFi Email Alert|Package Type: Standard Packaging|Verified Purchase This unit is great!!! I was able to set it up to send notices to cell phones and email. Most wireless phone providers let you send emails that convert to text messages. During the device setup, you can specify several email addresses to receive notifications. I used the format of [email protected] to send text messages to my Verizon wireless phone. So now water leak alerts will be sent as text messages to a couple cell phones plus a couple gmail accounts. I ran several tests and it works great! 23 people found this helpful
Question:	Will work with Google or can it be used with home automation
Answer:	Hello Kelly. After replacing the battery, wet your finger and touch the two sensing contacts. A loud, repetitive series of beeps should sound. If you are not hearing these please call us so that we can trouble shoot with you. We offer toll free support by phone (800 245 9265) during normal business hours Mon. thru Fri. 8:00am to 5:00pm PST. Thank you.
Question:	Does Flume 2 provide any upgrades over the original Flume
Answer:	The Zircon leak detector will float in water easily. It packs a great deal of function into a small microprocessor card. It's a closed box. The box is much lighter than the water it displaces. It floats easily. Peter castaldi
Question:	What is new on 2? Compared to previous version
Answer:	Emails come from Zircon, through Amazon SES. If the service is discontinued, the unit will continue to be an alarm, just no remote notifications. And by then, there may be a replacement.

Product features

Catch Water Leaks & Protect Your Home

Surprises are fun, but not when it comes to leaks. Flume alerts you of abnormal (or accidental) water usage to give you peace of mind whether you’re at home or away.

Down-to-the-Minute Water Use Data

Flume helps you paint a picture of your household’s water use. Dig into the data—down to the one-hundredth of a gallon—and find new ways to reduce waste and manage your water.

Refine Your Sprinkler Schedule

Ever wonder where your water goes? If you use a sprinkler system, most of it is probably outdoors. Flume lets you see your indoor versus outdoor consumption, view your usage history, and build a more efficient irrigation schedule.

Overflowing with Savings

A device that pays for itself. Flume automatically suggests a budget so you can cap your consumption and creates leak notifications to catch costly drips.

What If You Knew Exactly How Much Water You Used?

Knowledge is power. But when it comes to water, many of us don’t know where to start. We designed Flume to change that. Flume puts the power of water consumption and conservation in your hands, protects your home, and improves your relationship with our most precious resource.

The Future of Water Is Digital

You can’t manage what you don’t measure. At Flume, our mission is to empower people and communities to understand how we use water by liberating and digitizing the data behind it.

Eliminate waste. Save water. Together.

Big things are seldom accomplished in silos. We’re bridging the gap between consumers and water providers to fundamentally (and forever) change the way we understand and access water data. Only together can we eliminate waste and preserve our most precious resource.

• 🚗【Application range】For detecting the leakage of pipe systems on cars, motorcycles, such as fuel pipe, air intake system and cooling tank.
• 🚗【High Performance】Solid thick metal construction for durability, not easy to damage, long service life.
• 🚗【Working principle】Create smoke through the equipment and sent smoke to sealed car pipeline system. Where there is smoke in the pipeline, there is a leak.
• 🚗【Simple operation】1.Pour of smoke oil 2.Fixed power cord & smoke pipe 3.Connect the car battery 4.Turn on the power switch, and detector starts to work.
• 🚗【Packaging】Smoke tester *1, Power cord *1 (0.8m), Connector *1, Funnel *1, Silicone tube 1.5m *1，Alternate oil*1.

Product features

Working principle

Create smoke through the equipment and sent smoke to sealed car pipeline system. Where there is smoke in the pipeline, there is a leak.

Simple operation

1、Fill with 50-100ml of smoke oil and cover with rubber plug.

2、Connect the wire and the smoke pipe to the corresponding port on the machine.

3、Connect the power clamp to the car battery. Red is connected to the positive, Black is connected to the negative.

4、Turn on the power switch, and the machine starts to work.

5、Check the leak position. Please use head lamp if necessary. After leak detection, turn off the power and take off the pipe and power wire.

What You'll Need?

●12.5V Power (uses vehicle's 12V battery)

●Professional smoke oil or baby oil

Tips

Please make sure your Vehicle's battery is in normal working condition, the machine is suggested supply with DC voltage at 12.5+_V, lower voltage will decrease the amount of smoke and air pressure.

Product description

Help keep your valuable items safe from water damage with First Alert WA100-3 Water Alarms for Leak Detection and Flood Alerts. Ideal for basements, garages, laundry rooms, and bathrooms, these water detectors help you know the moment unwanted water appears in your home. Place one of the leak alarms at the bottom of a washing machine, water heater, or toilet, or in any room where there is fear of flooding. If a unit senses water, it will emit a loud 85-decibel alarm that will continue for up to 72 hours until silenced. Each water sensor is splash- and water-resistant and can be placed up to 6 feet away from its alarm unit. Each water alarm runs on a 9-volt battery and can operate in temperatures between 32 and 120 degrees Fahrenheit. This pack includes three water detectors and three 9-volt batteries.

From the Manufacturer

This 3 Pack First Alert Water Alarm Protects homes from water damage due to leaks, floods and seepage. Ideal uses: basements, garages, laundry rooms, bathrooms, hot tubs. Place near sump pump, washing machine, water heater, sinks, toilets. Water sensor attaches to bottom of unit or can extend 6 feet to remote location. Loud 85dB alarm sounds when unit senses water (lasts up to 72 hrs). Splash and water resistant

• Water alarm helps detect unwanted water
• Great for early detection of leaking appliances or external flooding
• Loud 85-decibel alarm designed to be heard easily
• Sensor can be placed up to 6 feet away from alarm unit
• Includes three water detectors and three 9-volt batteries

User questions & answers

Question:	If you place them on the bottom of a toilet tank will they detect seepage inside the tank and not go off every time the toilet is flushed
Answer:	06/2021
Question:	is there a low battery alert
Answer:	New sensors can last for over 24 hours and the sound strength will diminish over time. If you've had the water sensor for almost 2 years or if it has gone off in the past the sound will not be as loud and will not siren for as long. You can always test the sensor to see how loud they sound to kind of determine how much life is left in them. Test them by place a damp paper towel across the two bottom prongs or place them in a few drops of water for a second or so. The stronger the electrical conduction---the stronger the alarm will sound--just keep that in mind. We recommend replacing them every 2 years and checking them semi annually when you test your smoke detectors. Also, if you come home and find the alarm has been going off but you are not sure for how long---throw it away and get a new one. It's difficult to determine the battery life if you don't know how long or how many times the alarm has been triggered.
Question:	Can this device be used to detect rain as it enters a window so a sleeping person could be awakened to close the window
Answer:	Yes, the battery is not replaceable. However, he battery seems to last quite a while. We place one in our water heater closet and under all sinks (bathrooms and kitchen). We also use them in our RV under sinks and behind the toilet. I believe we've replaced only a couple due to a dead battery, and they were at least 18 months or more old.
Question:	This is a 3-pack: Are there three remote 6' water sensor wires
Answer:	Yes, just dry (wipe the sensor off) and the alarm will stop and can be reused. The problem I have with them is, I can't hear them. My wife can.

Product features

First Alert WA100-3 Water Alarm, 3-Pack

This 3 Pack First Alert Water Alarm helps to protect homes from water damage due to leaks, floods and seepage.

• Protect your home or business from water damage and save money on your homeowners insurance!
• Easy installation – attach to existing plumbing, place the water sensor on the floor behind the washing machine and download the free app
• New and Improved: Two notifications when water leak is detected - Loud 85dB continuous alarm and receive notification on your mobile phone from anywhere (attaching the wifi module in order to receive push notifications is optional)
• Power outage mode – automatically shuts off water during power outage and then switches back on as power returns
• Vacation mode – simple push-button shut off puts your mind at ease while on your trip

User questions & answers

Question:	I had a false alarm. the sensor is dry and there is no moisuture but i am unable to rest it. is anyone else having the same issue? what's the solution
Answer:	I'm sorry you're experiencing difficulties using the Automatic laundry Water Shut Off System. Please call our customer service representatives at 1-800-645-4994 so we may troubleshoot further.
Question:	I have version 1 of this system, is it possible to just order the wifi control module
Answer:	It looks like the wifi module is an optional piece (attaching the wifi module in order to receive push notifications is optional). The issue is it is not listed anywhere to purchase. Perhaps Amazon or vendor will correct this.
Question:	Why cant you put senser in washing machine pan
Answer:	If you are referring to a "Washing Machine Drain Pan" - I would recommend it. Older floors tend to "belly" and a dripping or leaking motor seal may run to the middle of the laundry room floor - same with a concrete basement floor - may to bellied to center of the basement and hopefully to a floor drain. My laundry room is on the main level of a ranch style home with a finished basement - I elected to put my washing machine into a drain pan and one large enough that goes all the way to the wall behind the washer so my hoses hang over the pan too. I only wish this company made a dishwasher automatic shutoff system.
Question:	Can you extend the length of the cord from the sensor to the shutoff? We need to put the water valves on the other side of a small wall
Answer:	I added 10 ft of low voltage (thermostat) wire and also added a 2nd sensor (Floor Water Sensor for Flood and Leak Detection (LS-2600) from Amazon) for the floor outside the drip-pan. I used "Waterproof Spade Connectors for the connection for both the extension wire and the extra water sensor ) Fotag Fotag 100 PCS Waterproof Heat Shrink Fully-Insulated Female Male Spade Terminals Electrical Wire Crimp Connectors Kit) also from Amazon - tested the system after making all connections and it works great. Wish I could add a couple of photos - you cannot tell it is not factory made - looks professional and now my mind is at ease when we travel to the lake on the weekends.

Product features

Put your mind at ease with the MyGuard Automatic Laundry Water Shut Off System

• Have peace-of-mind and save money on your Homeowners Insurance with the Automatic Laundry Water Leak Detector and Shut-Off System!
• Simply install the unit, place the water leak sensor behind the washing machine and download the free app.
• When water is detected in your laundry area, the valve shut-off is initiated.
• An 85dB alarm will sound and an alert will be sent to your mobile device (attaching the wifi module in order to receive push notifications through the app is optional).
• Your space is secure!

Download the Free App

• Download the free RCA Water Shut-Off app in the Apple App or Google Play Store.

Power Outage and Vacation Modes

• Power outage mode automatically shuts off water during power outages and then switches back on as power returns.
• For vacation mode, there is a simple push-button shut-off that puts your mind at ease while on your trip.

• Detect Various Flammable Gases: Portable Natural gas sniffer and tester is used to locate exact gas leak for various combustible gas, such as methane, natural gas, propane, LPG, sewer gas, coal gas, gasoline, other flammable gases
• Detection Range: Approximately 50 to 10,000 ppm (Based on Methane), instant response once encounter leakage points
• Easy-to-Use Gas Leak Detector: Powered by 3 AAA batteries (Not included), 12 inch bendable gooseneck can locate and detect the gas leaks even in hard-to-reach areas at home & VR, kitchen and fireplace etc., refer to “How and Where to Use the Y201 Combustible Gas Detector” video
• Sound and Visual Gas Alarm: Six red LED’s (visual) and 85dB audible alerts once encounter gas leakage along pipeline or around the suspected leakage points
• Original Design and Lifetime Technical Support: Design patent and certifications are applied to make sure the product quality and uniqueness. Replacement and friendly customer service are available even it’s broken in 24 months.

User questions & answers

Question:	is it precise
Answer:	Yes ours came with the headgear
Question:	Is any detection of gas harmful? My apartment supposedly just fixed its gas leak, but this is still showing the first level red light within my apt
Answer:	Don't know the max size. I wear a 7 3/4 hat and this fit fine. There is a minimal amount of adjustment left.
Question:	Do I need to replace the sensor after 2 years to keep this working? Or, is the unit useless after about 2 years? I read the sensor tip has a lifespan
Answer:	These type of hard hats is varies but it is fiberglass though. The color can be light to mid dark brown. They ship me with a light brown one. I was surprised it was very light, it was thin. Just be careful when buying from Warehouses. They say they will give you a new ratchet suspension but they never did. So be aware of that and if it happen they won't ship you a new one, they will ask you to reship it back and buy a new one, hopping you will receive the hard hat with the suspension but NO GUARENTEE. But to answer your question, yes it does look like that, but remember it varies on the seller because it come from a warehouse.
Question:	I don’t understand after it warms up how to detect gas ? Do I move the button until it stops ticking and no alarm? I move + and alarms sounds
Answer:	Front brim, ball cap style.

Product features

Techamor Portable Gas Leak Detector/Sniffer - Y201

The Y201 portable sniffer is an easy-to-use device that provides sound and visual alarm in presence of methane, propane, such as LPG, fuel and natural gas.

It’s mainly used to find and locate exact gas leak point along gas pipeline, around fittings or connectors at home & VR, and other similar applications. Helps to save hundreds of diagnostic fees from technician or plumber, and makes it's possible to debug gas leakage anytime by DIY.

For 24h gas monitor and detection, refer to Y301 and Y302.

2.1 Warm up process: around 10s

The speaker will always have “di didi…” until we turn off device, except one moment in step 2.2. At warm up period, ticking noise frequency is slow: around 2~3 times/s.

The knob is used to adjust sensitivity of detector after finish 10s warm up process, during the process, no matter how to adjust the knob, the device won't have any reactions.

2.2 Rotate the knob to adjust sensitivity

If the alarm sounds prematurely and LED lights are on after warm up, need to decrease sensitivity to prevent false alarm (dial downward "-", shown as red arrow) .

Rotate the knob to adjust sensitivity until the first bottom LED turn off or at the threshold of lighting up, and the moment that ticking sound stops. This is the best status.

But if it's inconvenient to get the best status, we can just make the first bottom LED be on and have slow ticking "di di...." sound. Because once encounter leakage, all the rest 4~5 LED will be triggered on together at just one moment.

2.3 Ready to sniff or trace leakage

Move the probe along pipeline or around the suspected leakage points, such as fittings, connectors and switches, once encounter gas leakage, all 5~6 LED lights will be triggered immediately and the low frequency (2~3 times/s) ticking will change into piercing sounds (frequency 6~7 times/s, too fast and human ears cannot distinguish one time by one time) .

3. Different Usage Pictures Collection from Lovely Customers

4.1 Could tell more related to use?

1) Easy to understand video will be good choice, refer to “How and where to use the Y201 gas leak detector” around pictures area at beginning . 2) Get service support, engineers on staff from factory online will help to answer any questions related to leakage if above video can't help to understand.

4.2 Why always has ticking sound?

The design of ticking sound has two purposes: 1) Indicates the device is working.For some cases, we need to extend the probe to the area that we can't see LED lights, customers could judge thru the sound changes. The green power LED light is also used to indicate the device is working. 2) Represent different levels of gas leakage. Low frequency (around 2~3 times/s) means warm-up period or no leakage, if changed into high frequency (around 6~7 times/s) during detection process, means encounter leakage issue.

Notes: above is based on we set sensitivity well, because if we rotate the knob at anti-clockside too much, even there don’t have any leakage, all the 6 LED will be triggered on and sound will become piecing high frequency.

4.3 Some batteries only use 10~15 minutes, then low battery indicator is on.

According to our experiment data at lab for different batteries brand, usually last from 15 minutes to 4 hours. Different brand batteries have very different quality. Indeed, the device is hungry for batteries. The sensor in the probe needs large power for micro burning process and we can feel a little warm if we use finger to hold the probe. Another reason maybe product itself, components (resistor, capacitor......) tolerance or damage on the PCB board may also lead to large power consumption, but the rate is very low.

Usually when we find customers from home inspection company, we will suggest purchasing rechargeable Li-batteries, because their technicians or plumbers use the device frequently and Li-batteries will help to save some batteries cost.

4.4 Is it normal or safe if get 1 red bar when move to high moisture room, around connectors or simply blow on probe?

Don't worry, it's normal, the large moisture change and CO affect the sensor performance, and may lead to false alarm by 1~2 LED red bars, but only last for 1~3s (very short time) if we move probe away. If we encounter leakage along the pipeline or connectors, all 5~6 LED bars will be triggered on at one moment, light and piercing sound alarm will last at least for 6~8s.

4.5 what's best distance between probe and pipeline/ranges/connectors.... during check process?

Recommend 1~10cm, if too far, concentration will become smaller as distance increase from leak point, and maybe not enough find and locate tiny leakage.

4.6 How about bubble method to check leakage compared with Y201?

Bubble is very good way and can be used to check all kinds of gas leakage while Y201 is mainly used for combustible gas. But for very tiny leakage and very strong leakage, bubble method maybe not good enough: 1) too tiny leak can't blow up bubble, too strong will blow the liquid away and can't have bubble, 2) some areas we can't extend to apply bubble liquid, 3) need good luck and skills to control the bubble liquid concentration if DIY bubble liquid, 4) in some case, liquid contact may lead to equipment or device damage.

The best way is: use both methods for double confirm if allowed, since bubble is more visible.

Product description

General's Non-Penetrating LCD Moisture Meter with Tricolor Bar Graph is ideal for DIY enthusiasts, woodworkers, contractors, building inspectors and water damage remediates. Includes 1 9V battery and user's manual. 1 Year Warranty.

GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools.

For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction.

WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS

• DETECT MOISTURE- Determine the moisture content of softwood, hardwood and other building materials (like drywall and masonry) or check water damaged areas to see if moisture is still present
• PROTECT WORK SURFACES - there are no pins on this tool, so your walls and projects can be saved from pinholes, scuffing and scratching to figure out their moisture levels
• VISUAL AND AUDIBLE ALERTS - if you’re looking for the source of a leak behind your work surfaces, listen for the high pitch tones to give you an accurate read on where moisture is most concentrated or quickly see using the tricolor LED moisture indicator
• DEEP READS - even without pins, this tool can read the moisture levels up to a 3/4 inch deep into the surface with an overall Measurement range of 0 to 53% for softwood, 0 to 35% for hardwood and relative readings for wallboard and masonry.Operating temperature: 32° to 122°F (0° to 50°C) @ <80% RH
• EASY TO READ AND USE- Auto-calibrating, 2-inch diagonal backlit LCD screen and a 3-color LED bar graph, HOLD button, auto power-off function, out of range alarm and low battery, 9V battery included
• FIRST STEP IN MOLD PREVENTION - by checking suspicious water stains with a moisture tester around the house, You can determine whether the area is wet (a perfect breeding ground for mold) or has long since dried

User questions & answers

Question:	Can this be used to locate a leak behind drywall. The drywall is not showing wetness so the water is probably running down a stud or outside wall
Answer:	The laser level is amazing I’m very happy with it. It helped me a lot with my work especially with tiles and hanging up pictures
Question:	Can this be used on concrete and drywall
Answer:	Yes, our laser level is suitable for laying tiles on the floor or wall. If you turn on all lasers, it can indeed give you several 90-degree angles at the same time.
Question:	I had a leak inside a wall that came from an outside source. I would like to check for moisture on drywall and wood behind wall. Is that possible
Answer:	There is a portable plastic toolbox that can hold all accessories and laser level, which is a great design. There is protective foam installed inside the tool box, so you don't have to worry about accidentally dropping it and damaging the laser inside. The case fully protects the laser!
Question:	What's the probe length? Are they insulated or replaceable
Answer:	Actually I don’t think there are any differences in function of the laser but they are different. I think the Huepar brand was introduced into the market earlier and accumulated more reviews, which resulted in customers willing to pay a higher price for the laser. I like my laser level very much and it works great.

Product features

Water Damage is the First Sign of Mold

Finding moisture is the first step in early mold prevention. High levels of moisture that go untreated are the main cause for harmful mold growth in the home.

With the MMD7NP pinless moisture meter by General Tools, scanning large areas of drywall and wood is easy with the pinless pad sensor. Quickly determine where your major problems areas are without making pin holes in your walls.

Worried about a leak? This meter can help you track it to its source. This can also be a great help in flood damaged homes. Use it to find where the water line truly stops so that you can remediate and stop future damage.

Product description

The Zircon leak Alert Wi-Fi smart water detector is a Wi-Fi water sensor and alarm that protects your property. This compact Wi-Fi leak detector allows for easy placement anywhere in any place that has potential for flooding or leaks such as near water heaters, sinks, dishwashers, sump pumps, and more. The leak Alert Wi-Fi is battery operated, wireless and fully automatic so no wiring or hub is required and all the limitations of hub-based Wired products on the market are avoided. When moisture is detected, the Wi-Fi water detector will sound an 105 dB alarm, emit a visual warning by flashing a SOS, and will send an email alert via your Wi-Fi connection to up to five email addresses to warn you of the water leak. This could potentially save thousands of dollars in water damages. The Zircon leak Alert Wi-Fi eliminates the need for all the expensive accessory equipment by operating independently on a hub-less platform. Each unit operates independently of each other and can be individually named, allowing for an infinite number of units to be on guard protecting your space from water damage. Name Each Wi-Fi water alarm during the set-up process (It is best to name Each unit uniquely based on the location The device is utilized) and the emergency email will alert you of the exact location of the problem allowing for even faster intervention. Should a flood occur, The leak Alert Wi-Fi unit will float and continue to send out visual flashing alerts, an auditory alarm, and email notifications so it can be both seen and heard from a distance. Zircon designed this Wi-Fi water leak detector to chirp and send email notifications when the battery is running low and needs to be replaced. Each leak Alert Wi-Fi unit includes an easily installed standard 3V Lithium battery to keep your smart water leak sensor running at optimal performance. Just like your smoke detector, remember to check and replace your leak Alert Wi-Fi batteries every year. The leak Alert Wi-Fi is the perfect water detector for HOA, multi-unit, and multi-story property managements. It is also a great smart home device to meet the needs of your property and protect your apartment, home or office. The Zircon leak Alert Wi-Fi allows you to save money and protect your entire property with one purchase.

• Fully automatic – no wiring or electricity required. Includes a 3V Lithium battery.
• Name Each device with it's location during Wi-Fi set up and email alerts will direct you immediately to the source of the alarm. Loud 105 dB alarm and flashing sos alarm still sound even when Wi-Fi isn't available. (Email alert is dependant on Wi-Fi availability).
• Continuously monitors for leaks around sinks, dishwashers, appliances, refrigerators, washing machines, sump pumps, water heaters, hot tubs, water filtration units, and more
• Independent and hubless system allows unlimited number of leak Alert Wi-Fi units to be set up and running at any given time. Perfect for personal residences, schools, offices, hotels, motels, property management, commercial buildings and more.
• Sends email notification and chirps when battery is low, so units can be maintained for optimal performance.

User questions & answers

Question:	I bought one of these at lowes, then 2 weeks later it sent a low battery email. is this normal battery life
Answer:	Hi Rich, The Morpheus 360 Bluetooth Wireless Metal Stereo Earbuds are IPX4, water resistant but not waterproof. Thank you for your interest! Regards, Michael
Question:	I would prefer that alexa inform me when i have a leak! will this unit interface and work with amazon's echo
Answer:	Sorry we cannot ship products with battery.So you may need to prepare the battery by yourself. The model is 18650.
Question:	Do you have to be connected to the wifi network the unit is connected to in order to get email alerts
Answer:	Well... I wired mine in, but just the look of it people can’t tell that it maybe a possibility.
Question:	Can it detect leaks in pipes in the wall or under tiles
Answer:	You are correct. It is not a ring doorbell but it does do what a ring does. The one problem with this that I found is that is does not come with batteries. They have to be purchased separately. I can's use it until I receive the batteries and I am not sure if it will work. The manufacturer should remove Ring from it's description.

Product features

Zircon Leak Alert WiFi

Undetected water can cause thousands of dollars in damage. Minimize the cost and heartbreak and place a Leak Alert WiFi smart water detector anywhere the potential for flooding or leaks exist.

The Leak Alert WiFi provides email, audio, and visual alerts to homeowners, renters, business owners, and property managers alike. Be alerted to water leaks as soon as one is detected.

No Hub or Monthly Fees

To configure your Leak Alert WiFi water detector, you will need:

• A brand new 3V (CR123A or CR17345) lithium battery (included)
• Access to a Wi-Fi network and password (if applicable)
• A desktop/laptop computer, tablet, or mobile phone (or “Electronic Device”) capable of connecting to the internet via Wi-Fi

During configuration, the Leak Alert WiFi serves as a temporary wireless access point for your electronic device. The purchase of a separate hub is not required and there are no monthly fees or subscriptions.

Detection & Alerts

Leak Alert water detectors have two Sensing Contacts that carry a mild electrical current. When both contacts detect moisture, the detector will sound a loud 105 dB alarm and the LEDs will flash. Email notifications will also be sent to configured email addresses every ten minutes for the first hour, and then once every hour for the life of the battery.

Placement

An infinite number of Zircon Leak Alert WiFi detectors can be configured and strategically placed in your home or property. Leak Alert detectors are intended for interior use only and must be placed within range of your router to successfully send email notifications.

Leak Alert water detectors must be placed with the two metal Sensing Contacts flush against the surface where it can come in contact with leaks.

Place the Leak Alert water detectors anywhere the potential for flood or leaks may occur:

• Sinks
• Refrigerators
• Dishwashers
• Toilets
• Washing Machines
• Sump Pumps
• Water Heaters and More

Battery Installation & Low Battery

The Zircon Leak Alert WiFi water detector includes one 3V (CR123A) lithium battery. Remove the plastic PULL tab strip from the battery compartment before use.

To access the battery compartment, grasp the base of the detector with one hand, placing your thumb and middle finger on the indented battery access grooves. Squeeze both sides of the bottom half of the case. Lift and detach the top cover.

During the initial configuration of your Leak Alert WiFi, you may receive a 'Low Battery Alert' notification to your configured email address(es) as a result of a temporary dip in the battery voltage during the configuration process. This is not uncommon. The battery will quickly recover its voltage once the configuration process is complete and the detector enters sleep mode.

In the event of an actual low battery, the Leak Alert WiFi will chirp every 30 seconds between 9:00 a.m. and 5:00 p.m. local time, and one email notification will be sent per 24-hour period.

Email Notifications

Email notifications will be sent as long as the detector is within range of your Wi-Fi router. Upon successful configuration, email notifications will be sent to confirm configuration, when a leak is detected, and when the battery is low and/or has been replaced. Each email will contain the detector’s name and time stamp.

To receive an optional event log summary every 6 days,check the option box 'Send Log Every 6 Days' in the 'Device' screen during configuration. The Event Log reports the last 20 notifications sent, including anytime there was a lost connection to the router, upon reconnection to the Internet.

Frequently Asked Questions

Question: What type of battery does the Leak Alert WiFi use?

Answer: The tool requires one (non-rechargeable) 3V (CR123A) lithium battery, included.

Q: Will the detector still work if there is a power outage to my Wi-Fi router?

A: The detector will be unable to send email alerts during this time. However, the visual and audio (105 dB alarm) alerts will still function.

Q: Why is my Leak Alert WiFi still emitting an alarm when the sensing contacts are dry?

A1: Moisture from your fingers can trigger the alarm if they come in contact with the external Sensing Contacts that wrap around the bottom of the detector.

A2: Alarm may actually be the chirp of the low battery indication. Replace with a new 3V (CR123A) lithium battery immediately.

Q: Will I ever need to reconnect the detector to the Wi-Fi network after the first configuration?

A: If the wireless password is updated, a new configuration is entered, or the router is factory reset, the Leak Alert WiFi must be reconfigured to the router.