11 best smart home water sensor

• World's Longest Wireless Range: Powered by LoRa technology, the long-range yet low-power system offers the industry’s longest receiving range in the market (1/4 mile). Our long-range coverage enables its use in areas challenging for most residential Wi-Fi systems, such as basements, outdoor porch/patio areas, sheds, free-standing garages, even remote outbuildings on your property.
• Easy and Effective Property Protection: The YoLink wireless Water Sensor could not be easier to install; just place near or under the equipment you wish to monitor. Suggested uses are near or under sump pumps, toilets, water heaters, laundry machines, dishwashers, sinks, fish tanks and any other location subject to water leaks and flooding.
• Early-Warning Notifications: Receive real-time early-warning notifications (in the form of smartphone banner alerts, limited SMS/text messages, and emails) and protect your home and property from water damage; Due to the water-tight and submersible design of the original Water Leak Sensor, an internal sounder/siren would not be heard outside of the water-tight housing. For an audible alarm, consider our Siren Alarm or consider the Water Leak Sensor 2 which has a built-in sounder.
• Low-Power Means Longer Battery Life: Because of the low power consumption, device batteries may last 5 years or more (depending on application and device usage/activity), on standard AAA Alkaline batteries (lithium batteries not required)!
• From Simple to Super-Smart: After setting up your notification preferences, keep it simple and let the YoLink system do the rest and monitor your home and property for you. Or, utilize available advanced automation features, including 3rd-party integration with Alexa and IFTTT, to interact with other YoLink and 3rd-party smart devices. Limited only by your imagination!

User questions & answers

Question:	Is there any monthly or yearly fee to connect to a service
Answer:	It is hard to silence the alarm unless you make a minor modification in advance. Don't wait until the 130 dB siren is going before you work out how to disable the alarm. I've had it blaring in my ears while I frantically try to open the case to disconnect the battery, only to find that opening it is very difficult, even with the aid of a tool such as a flat-head screwdriver. What I've done since is filed down the locking tabs slightly, just enough that the plastic case still locks but is much easier to open when the alarm sounds, so that the battery can be disconnected. Then you can address the water leak in relative peace.
Question:	I don't see any rope sensors which is bad for covering areas like washers, fridge, and water heaters. Any rope solutions I'm unaware of with this
Answer:	The wire has no gauge markings- printed or imprinted. Comparing the wire side by side with a wire stripper, appears to be 18 gauge and it is definitely stranded copper. It is most assuredly no larger than 18 gauge so I would lean towards 18 to 20. I don’t know your application as to why you would need to extend the original length but I can tell you that the device is really loud when activated - if that helps you any.
Question:	How to make with Alexa? Using a routine
Answer:	Hello, thank you for your question. It is a constant, steady high pitch alarm sound. It will keep going until it is removed from water.
Question:	What are the dimensions of the water sensors? (Inches and centimeters
Answer:	Hello, they use 9V battery. Batteries are included.

Product features

YoLink Smart Water Leak Sensor

• Works with Alexa - Receive voice announcements of changes detected by sensors in your home
• Works with IFTTT – Trigger Customer Automations Using IFTTT
• Real Time Status – Check the real-time water/moisture status of the sensor via the YoLink App
• Battery Status – Receive low-battery alerts before batteries need to be replaced
• YoLink Control – Trigger an action by select YoLink devices without reliance on the internet
• Automation – Easily setup scheduled and automatic actions and responses with the YoLink App as well as with 3rd-party integration platforms such as Alexa and IFTTT

Independent System

“YoLink” is a proprietary wireless technology provided by YoSmart. which is based on the Semtech's LoRa wireless technology combined with the YoSmart smart home/buiding protocol, to provide the most advanced smart home/buidling devices solution. Compared to WIFI, Bluetooth, ZigBee, Z-Wave, and other smart home protocols, it has the advantages of low-power consumption, long-distance coverage (wall penetration), and anti-interference. It is the first smart building/home protocol that can be very easily setup and is a very low cost but creates a reliable, robust and more secure IoT network.

No Internet Control

Turn on/off the valve even without internet.

Note: YoLink Valve sold separately!

Whole House Solution

Home Automation - Build "IF THIS THEN THAT" rules between YoLink Water Leak Sensor and YoLink Smart Plug (sold separately) , making life convenient and secure. With YoLink App, you can set smart scenes, automation and YoLink Control between devices and devices, sharing devices with family members and making your house smart. Let's start your own whole house smart home system with YoLink.

5X Long Lasting

Powered by 2*AAA batteries, YoLink Leak Sensor features with 5 years battery life compared to 1 year of other top brands.

Step 1, Download App

1, Download YoLink App from Apple store or Google play

2, Create Account and Login

Requirements:

Smartphone or tablet running iOS 9 or higher, Android 4.4 or higher

Step 2, Add Device

Scan the QR code on YoLink Hub and Water Leak Sensors to add into YoLink App.

You can customize their name, set their room, and add to/remove from “Favorite”.

Step 3, Connect to Internet

Power up the Hub using the supplied power adapter, connect to your Wi-Fi network (or directly to your router, using the included patch cord), and your YoLink Hub will connect to the App.

Step 4, Connect to Cloud

Press "Set" button on Water Leak Sensor once to connect it to YoLink Hub and Cloud.

• MONITOR LEAKS & TRACK WATER USAGE: StreamLabs smart home water monitor detects water leaks and tracks water usage using ultrasonic technology. It works by sending sound waves to your main water line & records the time delay to measure water flow.
• GET REAL-TIME ALERTS FROM THE APP: Using the free standard subscription through the StreamLabs app, you can set up real-time alerts on your smart phone. Enhanced subscription available for extended alert history, historical water usage & more.
• INSTALL IN 5 MINUTES: No pipe cutting or tools required. Simply attach the Monitor with the provided zip ties & plug in to a power source. Compatible with ¾ in. and 1 in. copper, PEX and CPVC pipes. Built-in Wi-Fi. Must be installed inside the home or in a crawlspace, garage, shed or weatherproof NEMA enclosure away from UV exposure.
• PROTECT THE ENTIRE HOME: Everyday usage, leaky pipes, appliance failures, freezing conditions and running toilets. One monitor protects your entire home.
• SMART HOME COMPATIBLE: App works with iOS 9.0 or later (iPhone/iPad) and Android 6.0 or later (phone/tablet). Compatible with Alexa or Google Assistant.

User questions & answers

Question:	What if i’d like to use more than 2 units? how can i add more, if i have multiple properties to manage
Answer:	StreamLabs finally put out an update to allow the app to add/monitor more than 2 devices up to a maximum of 5. However, they now charge $5.99 a month rent to utilize more than 2 monitors for life. You buy the device for $199 and then pay them rent each month to use it forever. (assuming you wish to add a 3rd, 4th or 5th unit to the account as in multiple properties to monitor). Sad as this is a great product and instead of urging customer to buy more, they penalize them and incentivize the customer to NOT buy additional units.
Question:	How small of a leak can it detect? Can it detect a dripping faucet
Answer:	The Monitor can detect flows as low as 0.25gpm on Copper-M, CPVC, and PEX pipes. The lowest it can detect on Copper-L is 0.5gpm. Typically a dripping faucet is too low of a flow rate for the Monitor to detect.
Question:	Is the company working on making the historical usage data more robust? Making it so an owner can see the usage over a period of months or even a year
Answer:	Nope! I spoke to them couple of times about that,trying to convince them how important that is, Unfortunately no fruit was produced..
Question:	Can’t seem to find what power source is required. Battery operated or does it require an outlet
Answer:	It uses an outlet. It is not battery operated.

Product features

StreamLabs Water Monitor Leak Detector

Being water savvy is easier than ever. The StreamLabs water monitor keeps an eye on what’s happening with the plumbing behind your walls and alerts you in real time when water problems arise – before they turn into disasters. With StreamLabs Smart Alerts, the monitor automatically detects your home's water usage patterns so you don't have to manually configure the device. With real-time insights, you receive instant notice of “abnormal” water use, along with comparative & historical data

Monitor

StreamLabs uses patented ultrasonic technology with real-time leak alerts for the most advanced leak detection.

Detect

StreamLabs sends sound waves into your main water line, recording the time delay to measure water flow.

Alert

Customize alerts to fit your water habits or use "Smart Alerts" to detect abnormal water flow automatically.

Integrate

Integrates seamlessly with Amazon Alexa or Google Assistant.

Leaky Pipes

Appliance Failure

Freezing Conditions

Running Toilet

Easy Installation

• Check the Wi-Fi strength at the installation location using the StreamLabs app.
• Install the Monitor on your main water line before any branches to other appliances, securing with the provided zip ties. The device must be installed inside the home or in a waterproof, covered enclosure.
• The device must be installed within 10 feet of a power outlet, or you can purchase a separate 25- or 50-foot extension cord.
• StreamLabs products are not available for sale outside of the US and Canada at this time, and the StreamLabs App is not available for download outside of the US and Canada. We do not currently support installations in countries outside of the US or Canada and cannot ensure that the Monitor will work on other pipes/systems.

Product description

How it works



1: Plug the Wifi gateway into socket, pull out the water sensors battery insulating tab.

2: Download ‘Govee Home’ on App Store or Google Play to your cellphone.

3: Open the app and sign up with your email account.

4: Click the icon '+' at the top right corner and select H5040 device.

5: Follow the app prompt to connect your wifi Gateway with your router(not support 5G wifi).

6: Name each sensor like Basements, Kitchen Sinks, Water Heaters and put the water sensors on the detecting location.

7:Get email, Push notifications and alert on your smartphone when leak happened

• Real-time Alerts: Connect the gateway to WiFi, and it will instantly send emails, App notifications & alerts to your phone when water leakage occurs even you're not at home. Water sensors and gateway are paired right out of the box. Note: Doesn't support 5G WiFi.
• Loud Alarm with Mute: If WiFi is not temporarily available, our 100dB alarm is loud enough to be heard. Press the Mute button to silence the alarm when you find the leak.
• Drip and Leak Alerts: Water sensor comes with 2 groups of back water detector probes & 1 group of front probes for pipe dripping detection. Use the App to name each sensor with its location.
• Connects to Multiple Sensors: WiFi connection gateway has a stronger and more stable signal transmission & lets you connect with multiple sensors simultaneously (10 max).
• IP66 Waterproof : The completely sealed IP66 waterproof design allows for extended use in high moisture areas.

User questions & answers

Question:	How can I add my devices? I deleted 2 sensors to get rid of a fault message and can’t get them back on my app
Answer:	Hello, This is a direct spark ignition.
Question:	I tried connecting with wifi several times as it indicated - I had next to my router with 2.4 G connection. Any help
Answer:	No it is not...It is actually made by HTP.
Question:	How far away can the gateway be? I have 3 floor house and need a sensor on each floor. Will that be a problem? Can you add more sensors
Answer:	Charge it for 1-2Charge it for 1-2 hours each time, and the indicator light above will remind you when the product is fully charged. hours each time, and the indicator light above will remind you when the product is fully charged.
Question:	how do I purchase additional sensors? I cannot find them - Govee B
Answer:	It is divided into two states: open and closed. It has two different colors divided into purple light and red light. Violet light can detect whether there is cat moss by illuminating the cat. The red light has five different patterns, which can be switched by the rotating button. Hope my answer can help you.

Product features

Govee WiFi Water Leak Detector

Using the connection between the gateway, water sensors, and Govee Home App, you can monitor any leakages on your phone while you are away from home. There are no annoying wires, which makes monitoring even easier. You can also name each WiFi water sensor according to their location on the App. When a leak occurs, the sensors will not only sound a loud alarm, but email and App notifications will also be sent to your phone. You can clearly know where the leakage happened and deal with it in time.

Open the App, Connect to H5040.

After downloading 'Govee Home' from the App Store or Google Play to your phone, please open the App and sign up with your email account. Then click the icon '+' at the top right corner and select H5040 device.

Press the Pairing Button for 3 seconds

Press the pairing button for 3 seconds until the red and blue light flash alternately and then input the WiFi password on your phone. Please note any special characters, blank spaces, and so on.

Connect Your WiFi Gateway

Follow the app prompt to connect your WiFi "Govee_Gateway_xxxx" with your router (doesn't support 5G WiFi). Place the water sensors in the detecting location and name each water alert .eg. basement, kitchen. Then you can begin to monitor the water leakage on your phone!

Monitor Water Leakage on Your Phone

After a successful connection, you can place the sensors and start to monitor water leakage on your App. Note: Please ensure the App and your phone settings are set to allow "push" notifications. The gateway will not send push notifications if the leak happens again in 90 seconds.

WiFi Gateway Supports Up to 10 Leak Detectors

Compared with others, our Govee WiFi gateway connection design has a stronger and more stable signal transmission. It works as a bridge to connect your WiFi with multiple water sensors. It receives the water leakage info from the sensors when leaking happens and sends it to the Govee Home App on your phone.

Loud Adjustable Audible Alarm with Sensitive Sensor Probes

Sensitive Sensor Probes: With 2 groups of water detector probes on the back and one group of probes on the front, the water alarm will swiftly notify you about any water pipe dripping.

Loud Adjustable Audible Alarm: Ultra-loud adjustable 0-100 dB alarm allows you choose a comfortable sound level to detect any water leakage when WiFi is not available in your home.

Product description

A Leak or Flood can be devastating both emotionally and financially.The SimpleSENCE leak and freeze detector combines protective features that blanket your home with layers of security for family safety and peace of mind.



● Leak Sensor

The small ergonomic size of the SimpleSENCE detector with wrap around water sensors allows for optimal placement in any leak prone area.



● Temperature Sensor

Monitors ambient temperatures, especially in cold weather climates that are prone to bursting pipes.



● Audible Alarm

The audible alarm activates when a leak or temperature variant is detected to alert anyone in the house when your smart phone may not be close by.



● Instant Alert Notifications

Receive instant alert notifications via email or sms push notifications to your smartphone as soon as a leak or temperature variant is detected.



● Long Battery Life

2-year battery life with battery life indicators for your sensor in the SimpleSENCE app.



Go Ahead and Order Now. We are so confident that you’ll love your SimpleSENCE Home Leak and Freeze Detector that we offer a ”No Questions Asked,100% Money Back Guarantee”! Plus, our dedicated Customer Care Team is standing by if you have any questions or need immediate assistance.

• TRUSTED LEAK PROTECTION – Protects your home with around the clock leak and freeze detection. Immediately alerts you via email, text and 80db audible alarm when a leak is detected. Two-year battery life with two easily replaceable AAA batteries, plus battery and WiFi strength levels on the SimpleSENCE app.
• SECURE FAST & EASY SET UP – Connects to your Home 2.4G Wi-Fi in only a few minutes and the easy to use SimpleSENCE App allows you to be up and running with no gateway needed, no additional equipment required, and no monthly subscription fees. 100% compliant with new 2020 state enacted cyber security regulations.
• INSTALL MULTIPLE SENSORS IN MULTIPLE LOCATIONS – Install throughout your home, office, vacation home, rental property, and even aging parents’ homes. Place next to water heaters, washing machines, dishwashers, under kitchen and bathroom sinks, behind toilets, in basements, next to sump pumps, and in attics.
• UNLIMITED ALERT NOTIFICATION CONTACTS – No limit to the number of contacts you can add to your alert notification list to help shut off the water if you’re not home, including family, friends, neighbors, and tenants.
• DEDICATED CUSTOMER SUPPORT – Protecting your home from leaks is our number one priority. If you need any assistance at all with your SimpleSENCE, please reach out to us directly, we’re happy to help and based in the USA.

User questions & answers

Question:	Will this unit work with a Wifi extender
Answer:	the gauges and regulator come pre assembled. just attach to your cylinder and attach your hose to the barbed fitting.
Question:	Will the device send a notification as soon as water is detected
Answer:	normally anyone with a tank, regulator, gas line assembly w/ball lock is looking to dispense draft beer, and a lot of it. Don't know about soda stream hookup but at the very least I bet it will void the warranty...
Question:	Does it tell you when the batteries need changing
Answer:	I wasn't so lucky. I received a regulator with a 1/4 barb adapter, not an integrated 5/16" barb. The product description clearly states "integrated" 5/16" barb. Not so in my case. I'm still trying to get the seller to correct this.
Question:	I would like to use on an outside water line. Is this indoor/outdoor
Answer:	Yes Taprite products are USA made. Mind you that doesn't mean there might not be foreign components but they're clearly meeting the criteria for labor and materials composition to apply Made In USA to their products. It is an excellent regulator, I own 2 of them and they've been great.

Product features

Protect Your Home and Valuables from Water Damage with the SimpleSENCE Water Leak and Freeze Detector

Place SimpleSENCE Sensors In Areas That May Encounter A Leak Or Freeze Event

Sleek - Ergonomic Design Allows You To Fit Your Sensor In Tight, Hard To Reach Spaces.

Loud 80 db Audible Alarm Alerts You In Case You're Away From Your Smart Device

Immediate Alert Notifications Sent Via Text or E-Mail To Your Smartphone or Tablet

Product description

Leave your home even with the washing machine running. Enjoy complete peace of mind knowing that no water’s leaking in the cabinet behind those water pipes. And keep a watchful eye on the basement, even though you don’t go there that often. Eve Water Guard detects water leaks and alerts you the moment they occur – visually, audibly and via an app on your iPhone. The supplied 6. 5 ft / 2 m sensing cable is extendable up to 490 ft / 150 m and serves as a full-length sensor for monitoring large areas of your room. And the Eve app reminds you at regular intervals to check that Eve Water Guard is working perfectly. With Eve Water Guard, avoid expensive water damage and add a watertight layer of protection to your home. Leveraging the power of Apple HomeKit technology, Eve Water Guard connects directly to your iPhone, iPad, or home hub such as an Apple TV or HomePod via Bluetooth technology – all without a bridge. Eve accessories are designed to safeguard you personal data - no matter whether you access Eve Water Guard locally or remotely, your personal data is never disclosed.

• Avoid expensive water damage: Eve Water Guard detects water leaks, and alerts you the moment they occur
• Alerts you acoustically with its 100 dB siren, visually by a red flashing warning light and notifies you via iPhone, iPad or Apple Watch
• 6.5 ft / 2 m sensing cable (extendable up to 490 ft / 150 m) serves as a full-length sensor for monitoring large areas of your room
• Perfect for the bathroom, utility room, basement and beneath sinks and water pipes
• Apple HomeKit-enabled for unparalleled ease of use and advanced security

Product features

Eve Water Guard - Connected Water Leak Detector (Apple HomeKit)

Water damage negatively affects your quality of life, results in expensive repair bills and unfortunately is something that happens very frequently. Now you can protect your home against such disastrous events. Eve Water Guard detects water leaks and alerts you the moment they occur – visually, audibly and via an app on your iPhone.

USPs: 100 dB siren & visual alert I Notifications I 6.5 ft sensing cable (extendable) I Scenes I Siren-test mode

Almost anything can cause water damage.

According to industry statistics, about one in 50 insured homes has a property damage claim caused by water damage or freezing each year. The causes are innumerable, with many leaks going undetected for long periods. They can range from burst pipes, a leaky dishwater outlet, a loose connection under the sink, a broken washing machine, a downpour that floods the basement to an overflowing bathtub – and practically anything else in between.

Water damage has catastrophic consequences.

Water damage causes all sorts of trouble, with loud dehumidifiers and pumps significantly impacting quality of life. If you fail to spot a leak, it can lead to mold which will wreak havoc on your health. Your furniture and possessions will also be affected, resulting in you needing to spend a lot of money on extensive and costly renovations. Say goodbye to this hassle, and protect yourself and your home with Eve Water Guard.

Identify water damage immediately.

If water leaks out, you’ll need to act swiftly to prevent worse damage. Eve Water Guard will alert you immediately with its 100 dB siren and red flashing warning light – and also notify you via iPhone, iPad, and Apple Watch. And if you’ve got a home hub – such as an Apple TV or HomePod – you’ll also get notifications when you’re away from home.

Wide-area monitoring.

Compared to other devices with spot-based detection, Eve Water Guard monitors large areas of your room thanks to its supplied 6.5 ft sensing cable that serves as a full-length sensor – and if that’s not enough, you can extend it up to an incredible 490 ft. This means that every nook and cranny of your room is monitored, leaving nowhere for water to leak out or pool undetected.

Peace-of-mind protection.

The Eve app reminds you at regular intervals to check that Eve Water Guard’s working perfectly – with a soft alarm that’s gentle on the ears. And if the siren is triggered, you can mute Eve Water Guard via your iPhone – even if you’re away from home, provided you have a home hub.

Really smart.

In case of an alarm, your HomeKit accessories all work in concert. Create a scene in which Eve Energy switches off your washing machine to stop even more water flooding out. Or use AirPlay 2 to sound an additional alarm on another floor. Now it won’t matter where you are at any given moment – your home hub, Apple TV or HomePod, makes all this possible.

A reassuring feeling.

Leave your home even with the washing machine running. Enjoy complete peace of mind knowing that no water’s leaking from the water pipes in the cabinets. And keep a watchful eye on the basement, even though you don’t go there that often. Eve Water Guard adds a watertight layer of protection to your home.

Product description

Cautions: All the Aqara products sold by AqaraDirect are the official models of US version. Products purchased from unauthorized sellers are NOT eligible for and replacement by Aqara.

• NOTES: Aqara Hub is required and sold separately. Requires a secured 2. 4 gigahertz WiFi network connection. One Aqara Hub can connect up to 32 Aqara devices.
• FLOOD DETECTION: Whenever the Aqara Water Leak Sensor detects water, it can send an alert to your phone and activate the local alarm on the Aqara Hub to prevent leaks and flooding.
• HOME AUTOMATION: Controls and triggers Aqara connected devices when excess water is detected.
• WIRELESS & SENSITIVE: No wiring or screws are required. The ultra mini design allows you to put it anywhere that dripping and leaking could happen. Our water leak sensor is designed with sensitive leak probes which the threshold of the water level is 0.5mm.
• INDUSTRY-LEADING QUALITY: Durable IP67 water-proof housing with rust-proof exterior coating.

User questions & answers

Question:	Is this unit Z-Wave Alexa and ring compatible
Answer:	not sure that is a question for manufacturer!
Question:	I was about to buy a few sensors because the price was $15.99 and all of the sudden the price went back to $99.99. Why is this so expensive
Answer:	The power cord is 6 feet 3 inches. Be careful which version of this 220V welder you get.You want the most up to date model with the most power. The are not all the same.
Question:	What is the best location for placement in a bathroom, considering a toilet or sink could potentially leak
Answer:	You can weld 1/4 inch material. The weld joint may need to be beveled for full penetration.If you really want to weld 1/4 inch material easily I would use a Miller 211 machine which welds up to 3/8" thick material.I know because that is what I have now. A miller 211. The Miller has auto set which takes the guess work out.The Miller 211 is 110V or 220V. The Miller has a blue light that blinks when you need to be using 220V for 1/4 or thicker material.
Question:	What does homekit add to the use of this product? does a homekit hub replace this product's hub
Answer:	Just acquired 60 lb. argon/co2 mix. Will use MIG soon and check for 10 lb. roll fit. Let you know.

Product features

Aqara Water Leak Sensor

Whenever water is detected, the Aqara Water Leak Sensor will send an alert notification to your phone and activate local alarm on the Aqara Hub.

Communications between Aqara Hub and Aqara devices can reach up to 20 m (65 feet) under normal conditions. It depending on terrain and building structure. Aqara Smart Plug and Aqara Smart Wall Switch can also be used as a signal repeater to extend signal coverage.

Easy Setup and Maintenance

Most Aqara devices require no wiring and screws. With the Aqara App and its easy-to-follow instructions, you can set up your smart home in no time. Aqara devices are also made to consume very little energy, and most Aqara products can last over 2 years without changing batteries.

Peace of Mind

Aqara can always provide you with the comfort of knowing what’s happening at home while you’re away. With a wide range of sensors, Aqara can trigger the alarm sound or send you an alert notification when unexpected entry, movement, temperature change, or water leak is detected.

Remote Control and Automation

Aqara provides you with countless ways to control your smart home, whether it be through your phone, wireless switches, or voice commands via 3rd party voice assistants. Set different automations and scenes to control your electronic devices based on the time of day or your personal preference. Your house will always be at your command no matter where you are.

Compatible with Most Voice Assistants

Aqara Hub is designed as high-compatibility smart home control center. Aqara devices into Apple HomeKit and Xiaomi Mi Home to work with other compatible devices for alarm systems, home automation, and voice commands. For example, you can set an “Away Mode” and activate the scene using your voice.

Product description

The Flume 2 Smart Home Water Monitor is changing the way we consume water by giving you the ability to manage, monitor, and conserve the world's most precious resource. Take control of your water usage and bring quirky facts to the backyard barbecue with real-time water usage monitoring. Flume pinpoints your indoor versus outdoor use with down-to-the-minute, source-specific, water use reports and insights. Powerful water leak detection technology is always onguard alerting you to potentially costly and damaging leaks before they occur. Reduce your water bill and take the guessing game out of your water usage by setting daily, weekly or monthly budgets to save water and money. Not sure where to start? Flume will automatically suggest water use budgets based off of your water data to maximize your savings and reduce waste. Set up and install Flume in the time it takes you to brew your Sunday pot of coffee. No pipe cutting. No wiring. No appointments. No plumbers. With the power of Flume, you will save water, save money and protect your entire property from leaks whether home or away. Get your water data on your favorite smart devices with our iOS and Android apps. Flume is Alexa enabled to bring an extra level of convenience to your household.

• 24/7 SMART WATER LEAK DETECTION: Flume's smart water leak detection technology is always on guard alerting you to water leaks inside the home as well as in your lawn or garden. Gain peace of mind whether you're at home or away with water leak alerts delivered directly to your phone via the Flume Water app. Stop water leaks and protect your home today with Flume.
• REAL-TIME SMART WATER USAGE MONITORING: Dig up the details your standard water bill doesn’t with Flume's real-time smart water monitoring technology. Flume delivers down to the one-hundredth of a gallon water use insight data directly to your smartphone so you're always in the know. Take the guessing game out of your water usage and take control to reduce waste and conserve water.
• REDUCE & MANAGE YOUR WATER BILL: A smart water monitor that pays for itself. Flume allows you to be proactive about managing your water usage by protecting the planet and your pockets. Create daily, weekly or monthly water use budgets that use smart alerts to notify you of potential water leaks and waste. Flume has helped customers save an average of 10-20% per month on their water bill.
• GET TO KNOW YOUR WATER INSIDE AND OUT: Flume pinpoints and displays your indoor versus outdoor use with down to the minute, source-specific, water use reports and insights. Now you can know exactly how much water your sprinkler system uses to create a smarter sprinkler schedule.
• INSTALLS IN MINUTES. NO PLUMBING REQUIRED: The Flume Smart Home Water Monitor is compatible with 95% of homes and installs in minutes. No pipe cutting, no wiring, no appointments. You've got it covered, but we're here if you need us.

User questions & answers

Question:	What's the return policy on Flume 2 if it doesn't work for me
Answer:	JD 5.0 out of 5 starsThis unit can send text messages to phones too! December 30, 2017 Size: 1 Pack|Style: WiFi Email Alert|Package Type: Standard Packaging|Verified Purchase This unit is great!!! I was able to set it up to send notices to cell phones and email. Most wireless phone providers let you send emails that convert to text messages. During the device setup, you can specify several email addresses to receive notifications. I used the format of [email protected] to send text messages to my Verizon wireless phone. So now water leak alerts will be sent as text messages to a couple cell phones plus a couple gmail accounts. I ran several tests and it works great! 23 people found this helpful
Question:	Will work with Google or can it be used with home automation
Answer:	Hello Kelly. After replacing the battery, wet your finger and touch the two sensing contacts. A loud, repetitive series of beeps should sound. If you are not hearing these please call us so that we can trouble shoot with you. We offer toll free support by phone (800 245 9265) during normal business hours Mon. thru Fri. 8:00am to 5:00pm PST. Thank you.
Question:	Does Flume 2 provide any upgrades over the original Flume
Answer:	The Zircon leak detector will float in water easily. It packs a great deal of function into a small microprocessor card. It's a closed box. The box is much lighter than the water it displaces. It floats easily. Peter castaldi
Question:	What is new on 2? Compared to previous version
Answer:	Emails come from Zircon, through Amazon SES. If the service is discontinued, the unit will continue to be an alarm, just no remote notifications. And by then, there may be a replacement.

Product features

Catch Water Leaks & Protect Your Home

Surprises are fun, but not when it comes to leaks. Flume alerts you of abnormal (or accidental) water usage to give you peace of mind whether you’re at home or away.

Down-to-the-Minute Water Use Data

Flume helps you paint a picture of your household’s water use. Dig into the data—down to the one-hundredth of a gallon—and find new ways to reduce waste and manage your water.

Refine Your Sprinkler Schedule

Ever wonder where your water goes? If you use a sprinkler system, most of it is probably outdoors. Flume lets you see your indoor versus outdoor consumption, view your usage history, and build a more efficient irrigation schedule.

Overflowing with Savings

A device that pays for itself. Flume automatically suggests a budget so you can cap your consumption and creates leak notifications to catch costly drips.

What If You Knew Exactly How Much Water You Used?

Knowledge is power. But when it comes to water, many of us don’t know where to start. We designed Flume to change that. Flume puts the power of water consumption and conservation in your hands, protects your home, and improves your relationship with our most precious resource.

The Future of Water Is Digital

You can’t manage what you don’t measure. At Flume, our mission is to empower people and communities to understand how we use water by liberating and digitizing the data behind it.

Eliminate waste. Save water. Together.

Big things are seldom accomplished in silos. We’re bridging the gap between consumers and water providers to fundamentally (and forever) change the way we understand and access water data. Only together can we eliminate waste and preserve our most precious resource.

Product description

The Wasserstein smart wireless water sensor keep your home safe, by alerting you to potential water leak before the issue becomes too serious. It’s battery powered with low energy consumption and it can operate in standby mode for over 6 months. Compact in size that can be fitted easily into the smallest of gaps and it requires no hub or subscription service just to connect to your existing Wi-Fi network, simply download the Wstein App on iOS and Android. Link it to the water sensor then you will receive instant push notification of water leakage and can keep an eye on the battery level of the device to ensure the water sensor will never run out of power.

• ✔ FUNCTION – Our smart wireless water sensor offers reliable performance, helping to keep your home safe, by alerting you to potential water leak before the issue becomes too serious, thus helping to prevent costly water damage. Battery powered with low energy consumption, it can operate in standby mode for over 6 months. The sensor, requires little effort to install and it is very easy to use, you are certain to get the quality and durability that you desire.
• ✔ THOUGHTFUL DESIGN – Compact in size and can be fitted easily into the smallest of gaps. For a total peace of mind, place the water sensor near your washing machine, water heater, sinks or dishwasher. The bottom of the sensor contains 3 highly sensitive gold-plated probes, which when it comes in contacts with water will create a circuit, that will set off the alarm to alert you of possible flood.
• ✔ PLUG & PLAY WITH INTUITIVE APP – Our Smart Water Sensor requires no hub or subscription service. Designed to connect to your existing Wi-Fi network, simply download the Wstein App on iOS and Android, and link it to the water sensor. From the app you will receive instant push notification of water leakage and it also possible to keep an eye on the battery level of the device, to ensure the water sensor will never run out of power.
• ✔ WASSERSTEIN SAVINGS – Realize huge savings when you buy our Wasserstein Smart Water Sensor together with our other smart home accessories: Our Alexa-compatible Smart Mini Plug (ASIN: B073XJVNX6, B075JZCTRD), Our Smart Plug (ASIN: B06Y3ZJ6M7, B072KKKTGZ) or our Smart Outdoor Switch (ASIN: B076TZ6H1Z). Simply add both products to your cart and use discount code ‘SmartWas’ at the checkout.
• ✔ PACKAGE INCLUDES: 2x Wasserstein Smart Water Sensor, 2x Base Cover, 2x CR2 Battery, 2x Screws and Anchor and User Manual. Wasserstein guarantee - If you should not be satisfied by our products, please get in touch with us and we will try to resolve the issue. If we can't resolve the problem to your satisfaction you will receive a full refund - no questions asked

User questions & answers

Question:	This damn thing won't text me and I can't find a phone number to walk me through. I put my wifi network name it and nothing I regestiered and nothing
Answer:	Yes it comes with (02) Manifolds and yes you can get a third one to plumb inline. Here is the link for it: https://www.amazon.com/FZONE-Regulator-Expandable-Manifold-Counter/dp/B08BRPHB7M/ref=sr_1_1?dchild=1&keywords=FZone+Manifold+Block&qid=1610105385&sr=8-1
Question:	Does this work with google home
Answer:	No, the bubble counter has a built-in check valve to protect the regulator. However, you may still want a check valve installed near your diffuser to prevent too much water from back-flowing to the bubble counter. It is counter-productive to have your CO2 work to push water through the line while it makes it's way to the diffuser.
Question:	Do I need google play? will the app from my apple iphone download work
Answer:	Yes
Question:	If I buy 4-6 of these will they all work with a single iPhone
Answer:	I don’t have that problem with either of mine. The needle valve is a secondary regulation device. Try adjusting the primary regulator valve down. This will reduce pressure to the needle valve.

Product features

Smart Wireless Wi-Fi Water Sensor with App and Alarm Notification

Protect your Property

Protect your home from potentially pricey water damage with our smart water sensor designed to detect the first sign of moisture. With its uniquely compact sensor head, it can be inserted into the smallest of gaps that other sensors may not fit into. Alerting you of leakages through your phone and via a loud alarm.

• No expensive hub or subscription needed
• Push notifications via our app
• Reliable detection through gold-plated probes
• Sturdy mounting bracket on the main body

Quick and Reliable Detection

Unlike other water sensors that are too chunky to fit into small spaces, the Wasserstein smart water sensor features a compact detection head fitted with sensitive gold-plated probes. Allowing it to better fit under your appliances and to send out alerts of leakage without any delay.

Dual Alert Systems

Get alerted the minute water leakage occurs whether you are home or away. We’ve fitted our smart Wi-Fi flood sensor with an alarm and programmed it to send notifications straight to your phone through our Wstein app. The free iOS and Android-compatible app also allows you to monitor battery levels with ease.

No Hidden Charges

You don’t need a pricey hub or paying a subscription fee to enjoy the functionality of this device. Just download the free app, seamlessly connect the water sensor to your Wi-Fi network, and actively prevent water damage without having to pay extra.

Battery That Lasts

We’ve optimized energy efficiency to save you the hassle and expense of constantly replacing batteries. The included CR2 battery will last you for over 6 months on standby mode.

Product description

The Smart Water Leak Monitor Sensor has Wi-Fi capabilities so you can connect to your home network. Whether you are in the office or on the road, you can check the status via TUYA / Smart Life app at any time. At the same time, you can also choose to open SMS or PHONE VOICE CALL NOTIFICATION( Value-added Services).

1. With two alarm modes you can fully understand the situation of the water leakage, so you can handle it quickly and avoid further losses.

2. As soon as the water detector detects leaking water, 100dB alarm will sound within 1 second and an alarm message will be sent to the smartphone within 2-10 seconds (depending on the network speed).

3. Built-in rechargeable battery to avoid battery replacement. More comfortable and energy efficient.

4. The small water detector with 5.9ft long cable will not be damaged at high water level and will adapt to more complex installation environments.

5. The water sensor can also be used with the power turned off and the power down network, as the wireless alarm has a battery and a horn, it can also trigger an alarm in case of water leakage, so you can handle it quickly and avoid further losses.

(The water alarm automatically restores after the network is restored, the network does not need to be reconfigured.)

6. The 100dB alarm tone will not be hard, so you will be informed in time about the water leak.

7. With the TUYA App and the Quick Start Guide, it only takes a few minutes to install the device.

Everything you need for an installation can be found in the packaging - simply connect the water detector via the app to the Wi-Fi network, and you're done.

Note: Charge the water detector before use.

Delivery:

1 x water leak detector

1 x probe cable

1 x ring tone setting / reset pin

1 x user manual

1 x rubber pad

• 💎 RELIABLE PERFORMANCE 💎 If the water sensor detects leaking water or the preset limit overrun, the 100dB alarm will sound and alert you to the situation, preventing potential water damage.（❤ Please Note: Only support 2.4G Wi-Fi, we have published the operation video of this detector on YouTube. Please search "shonmau" to view it❤ ).
• 💎 DOUBLE SAFEGUARD & QUICK REPORTING 💎 As soon as the water detector detects leaking water, 100dB alarm will sound within 1 second and you smartphone will receive an alarm message by the Tuya APP within 2-10 seconds (depending on the network speed).This is free to use. 【IN ADDITION - we also provide the second level of security (value-added service), you can choose to open the SMS or phone call notification alarm function on the app. The annual value-added service fee is no more than $2.
• 💎 CHILDREN-EFFICIENT INSTALLATION & OPERATION 💎 No gateways and complicated cabling required, you can connect our water sensor to your home Wi-Fi in just a few simple steps (2.4G Wi-Fi only). Whether you are in the office or on the road, you can check the status via app at any time. You can also share this with others, and more people can receive alerts and track the progress of wireless sensor activity.
• 💎 WIDE APPLICATION 💎 The water monitor detector can be used in washer / bathrooms / basements / sinks / water heaters / aquariums dishwashers / refrigerators / fish Tanks / plumbing / toilets / behind toilet / water filtration units / garbage disposals / sump pumps etc. It can also be used to monitor the preset limit of water level in bathtub / pool / pool and other scenarios. The small water detector with 5.9ft long cable probe will adapt to more complex installation environments.
• 💎 REMOTE ELECTRONIC WATER SENSOR ALARM💎 7 * 24 Hours Fast Response Service-You can always contact us, if there is any question about the water alarm. We will respond within 24 hours, avoid making you wait so long.

Product features

Whether you are in the office or on the road, you can check the status via TUYA / Smart Life app at any time,any where.

1. With two alarm modes you can fully understand the situation of the water leakage, so you can handle it quickly and avoid further losses.

2. As soon as the water detector detects leaking water, 80dB alarm will sound within 1 second and an alarm message will be sent to the smartphone within 2-10 seconds (depending on the network speed).

3. Built-in rechargeable battery to avoid battery replacement. More comfortable and energy efficient.

4. The small water detector with 5.9ft long cable will not be damaged at high water level and will adapt to more complex installation environments.

5. The water sensor can also be used with the power turned off and the power down network, as the wireless alarm has a battery and a horn, it can also trigger an alarm in case of water leakage, so you can handle it quickly and avoid further losses.

(The water alarm automatically restores after the network is restored, the network does not need to be reconfigured.)

6. The 80 dB alarm tone will not be hard, so you will be informed in time about the water leak.

7. With the TUYA App and the Quick Start Guide, it only takes a few minutes to install the device.

Everything you need for an installation can be found in the packaging - simply connect the water detector via the app to the Wi-Fi network, and you're done.

Tuay APP No Monthly F-ee Push Water Leak Alarm Notification

When the water detector is connected to the network normally, if a water leak is detected, Tuya APP will send you an alarm notification within a few seconds. So that you can deal with it in time to avoid your greater property loss. There is no F-ee to use this function.

Tuya APP can not only connect our Wi-Fi water alarm, but also connect all Tuya smart products and monitor them in real time. Moreover, many control products of Tuyasmart can be connected with Alexa and Google Home to realize voice control, such as smart switches, smart bulbs, etc

VALUE ADDED SERVICES

If you open this value-added service function, you can not only receive free reminders from Tuya app, but also receive SMS or voice call alarm notifications.

Why Choose Our Water Detector Alarm?

When there are elderly people at home who forget to turn off the water, children play with water and forget to turn off the water, in these cases, if you put a detector in these places, you will receive a water leak in time.

Wide Application Scenarios of Wi-Fi Water Detector, Home, Office etc.

You need to connect the product before using this function

Enter the main interface of Tuya APP-Smart-Automation-then click "+" in the upper right corner

Select the alarm status of the detector

Water leak sensor-Flooding detection state-Water immersion alarm

Select water leak notification push

Send notification-Select notification method (Phone notification / SMS notification), you can choose one of them. If these functions are not enabled in, there will be a prompt for you to open them. You can quickly open them according to the prompt on the app interface.

In the figure, the function of opening SMS is taken as an example

When a leak is detected, your phone will receive an SMS alert reminder (if you choose to activate the SMS notification function), this feature is 2 D-ollar a year. If you activate the voice call notification function, you will receive a voice alarm call.

Product description

DESCRIPTION

Escape of water damage is one of the most common types of domestic property damage claims—more than fire or theft. These aqueous

accidents of course can stem from floods and storms, but most involve burst washing machine hoses, bathroom or roof leaks, and general

toilet, water tank, hot water tank or refrigerator piping malfunctions. The result? Water damage that can run you in the thousands of pounds.

Sure, you can place dumb water detectors that emit an alarm when pools appear. But these detectors are only effective if you’re home to hear

the alarm, and can take the action quickly.

If you’re often out of the house, on the road, simply at work, or own a second home, you want a Smart WiFi leak detector. Unlike an alarm no

one may hear, a Smart WiFi leak detector can transmit an emergency alert to your smartphone and help you to prevent an unwanted aquatic event.

Samotech Smart WiFi water leak detector is connected to your Internet at home and accurately monitors for any accumulated water around rrits sensor. It is small enough to be hidden under the sink or any other place you want to monitor. When the sensor detects water the device sends an alert to your smartphone making you aware of the potential issue and helps to avoid a bigger problem. COMPATIBILITY: Smart Life, Tuya INSTRUCTIONS: 1. Download Smart Life application from Google Play or App store 2. Open Smart Life app on your phone 3. Register and login 4. Press on + sign to add a new device 5. Select Other -> WiFi connector as the device type and press blue button on the next screen 6. Press and hold the Reset button on the device for 6 seconds, the indicator will blink rapidly 7. Continue with adding the device by entering your WiFi details and pressing Confirm button 8. In a few seconds the new device should be found and added to the Smart Life app PACKAGE CONTAINS: 1* Smart WiFi Water Leak Rechargeable Sensor MicroUSB Charging cable Installation screws

• REQUIRES a 2. 4 GHz WIFI CONNECTION and offers quick and easy installation without the need for a professional.
• Alerts you when water is detected by sending a notification to Smart Life App on your phone
• Long Water Detection Sensor Cable for Flexible Placement
• Lower Power Consumption WiFi chipset allowing a several months of usage
• Standalone, works with your Existing Wi-Fi Router, No additional devices or Hub required

User questions & answers

Question:	I am still confused if the alert message to my phone is free of charge or is it a subscription for alerts
Answer:	Hello. this one need install a app, it's will send push notisfiction when water flood.thanks
Question:	Does it sound an alarm on the device itself or only through the phone notification
Answer:	hello. it's only send notification to your phone
Question:	Will it work with samsung smartthings
Answer:	Sorry. Can not
Question:	Smart life and alexa are already connected but Alexa can't find the sensor. Advice
Answer:	please see the instruction, you need go to alexa setting find the sensor.

Product description

How it works



1: Plug the Wifi gateway into socket, pull out the water sensors battery insulating tab.

2: Download ‘Govee Home’ on App Store or Google Play to your cellphone.

3: Open the app and sign up with your email account.

4: Click the icon '+' at the top right corner and select H5040 device.

5: Follow the app prompt to connect your wifi Gateway with your router(not support 5G wifi).

6: Name each sensor like Basements, Kitchen Sinks, Water Heaters and put the water sensors on the detecting location.

7:Get email, Push notifications and alert on your smartphone when leak happened

• Real-time Alerts: Connect the gateway to WiFi, and it will instantly send emails, App notifications & alerts to your phone when water leakage occurs even you're not at home. Water sensors and gateway are paired right out of the box. Note: Doesn't support 5G WiFi.
• Loud Alarm with Mute: If WiFi is not temporarily available, our 100dB alarm is loud enough to be heard. Press the Mute button to silence the alarm when you find the leak.
• Drip and Leak Alerts: Water sensor comes with 2 groups of back water detector probes & 1 group of front probes for pipe dripping detection. Use the App to name each sensor with its location.
• Connects to Multiple Sensors: WiFi connection gateway has a stronger and more stable signal transmission & lets you connect with multiple sensors simultaneously (10 max).
• IP66 Waterproof : The completely sealed IP66 waterproof design allows for extended use in high moisture areas.

User questions & answers

Question:	Can this be setup on alexa as a triggered routine? For example, if sensor is tripped turn off washer machine outlet
Answer:	Like all Ring devices, this is not compatible with Homekit out of the box. However, you can connect it to Homekit using Homebridge running off a computer or Raspberry Pi. See homebridge.io for more detail on that. Ring also promised in June 2016 that they will bring Homekit compatibility to their devices, but 4 years later and it's still not there. So Homebridge is the best option for now.
Question:	What is the maximum range distance for the gateway and sensor
Answer:	No, at this time, you cannot change any of the settings such as temperature set point. The sensor is set from the factory to alert when the temp drops below 40 degrees F. It does not give any alerts for higher temperatures at all. Of course it also sends alerts when the sensors on the underside sense water.
Question:	Can the audible alarm be silenced from the iphone app
Answer:	No, this is not compatible with the ring doorbell.
Question:	Can this be used to detect a tub that has overflowed
Answer:	Two alarms in one unit, it is made to sit on the floor. There are metal contactacts on the bottom to pick up a leak on the floor or flood and also a temperature alarm when it is less than 40F. I have mine on the floor by my sump pump crock. If it is less than 40, you get a warning before it gets cold enough to freeze a pipe.

Product features

Govee WiFi Water Leak Detector

Using the connection between the gateway, water sensors, and Govee Home App, you can monitor any leakages on your phone while you are away from home. There are no annoying wires, which makes monitoring even easier. You can also name each WiFi water sensor according to their location on the App. When a leak occurs, the sensors will not only sound a loud alarm, but email and App notifications will also be sent to your phone. You can clearly know where the leakage happened and deal with it in time

Open the App, Connect to H5040

After downloading 'Govee Home' from the App Store or Google Play to your phone, please open the App and sign up with your email account. Then click the icon '+' at the top right corner and select H5040 device.

Press the Pairing Button for 3 seconds

Press the pairing button for 3 seconds until the red and blue light flash alternately and then input the WiFi password on your phone. Please note any special characters, blank spaces, and so on.

Connect Your WiFi Gateway

Follow the app prompt to connect your WiFi "Govee_Gateway_xxxx" with your router (doesn't support 5G WiFi). Place the water sensors in the detecting location and name each water alert .eg. basement, kitchen. Then you can begin to monitor the water leakage on your phone!

Monitor Water Leakage on Your Phone

After a successful connection, you can place the sensors and start to monitor water leakage on your App. Note: Please ensure the App and your phone settings are set to allow "push" notifications. The gateway will not send push notifications if the leak happens again in 90 seconds.

WiFi Gateway Supports Up to 10 Leak Detectors

Compared with others, our Govee WiFi gateway connection design has a stronger and more stable signal transmission. It works as a bridge to connect your WiFi with multiple water sensors. It receives the water leakage info from the sensors when leaking happens and sends it to the Govee Home App on your phone.

Loud Audible Alarm with Sensitive Sensor Probes

Loud Adjustable Audible Alarm with Sensitive Sensor Probes

Sensitive Sensor Probes: With 2 groups of water detector probes on the back and one group of probes on the front, the water alarm will swiftly notify you about any water pipe dripping.

Loud Adjustable Audible Alarm: Ultra-loud 100 dB alarm is easy to be heard even if leaks occur in your basement. Press the Mute button to silence the alarm when you find the leak.