13 best lp gas detector rvs
An LP gas detector for RVs (Recreational Vehicles) is a safety device designed to detect the presence of liquefied petroleum (LP) gas, commonly known as propane, within the living space of an RV. Here are some key aspects associated with LP gas detectors for RVs:
Detection of Propane Gas: LP gas detectors are equipped with sensors that can detect the presence of propane gas in the air. Propane is commonly used in RVs for cooking, heating, and powering appliances.
Alarm System: When the detector senses a certain level of propane concentration, it triggers an alarm to alert the occupants of the RV.This alarm can be audible, visual, or both, depending on the specific model.
Safety Precaution: LP gas detectors play a crucial role in ensuring the safety of individuals inside an RV. Propane is highly flammable, and leaks can pose a serious risk of fire or explosion. Detecting gas leaks early allows for prompt action to mitigate potential dangers.
Power Source: LP gas detectors for RVs are often designed to operate on the RV's electrical system. Some models may also have a battery backup to ensure continued functionality in case of a power outage.
Installation: These detectors are typically designed for easy installation in RVs. They may be mounted on the wall or ceiling, and installation often involves connecting the unit to the RV's power supply.
Testing and Maintenance: It's essential to regularly test LP gas detectors to ensure they are functioning correctly. Many models have a test button that allows users to check the alarm and sensor functionality. Regular maintenance and replacement, as recommended by the manufacturer, are crucial for reliable performance.
Compliance with Standards: High-quality LP gas detectors for RVs comply with relevant safety standards to ensure their effectiveness in detecting gas leaks and providing timely warnings.
When selecting an LP gas detector for an RV, it's important to consider the specific features of the model, including its sensitivity, power source, ease of installation, and any additional functionalities. Following the manufacturer's guidelines for installation, testing, and maintenance is vital to ensure the continued safety of RV occupants.
Below you can find our editor's choice of the best lp gas detector rvs on the market
Safe-T-Alert by MTI Industries 35-742-WT Dual LP/CO Alarm - 12V, 35 Series Flush Mount, White
Safe-T-Alert by MTI Industries
Product description
The Safe-T-Alert 35 Series Dual Propane/Carbon Monoxide Alarm with Flush Mounting detects both gas leaks and carbon monoxide gas simultaneously; Twelve volts power means no missing or dead batteries to replace and this alarm is built for extreme RV environments; This product meets RVIA/NFPA requirements and is listed to UL 1484 RV and UL 2034 RV; Available in white, brown, or black
- Double-duty alarm detects both gas leaks and CO gas simultaneously
- Reliable 12V power means no missing or dead batteries to replace
- Flush mount
- Meets RVIA/NFPA requirements and is listed to UL 1484 RV and UL 2034 RV
- Dimensions: 6.375" W x 2.875" H x 1.25" D
User questions & answers
| Question: | i'm replacing a 5 year old unit that is marked 12vdc 82ma. all i see for sale is 12vdc 108ma. any problem with this scenario |
| Answer: | Small potatoes. These ma are small, in any event and i'd go for it. What surprised me is that my old and new - identical - units had the same amperage. Is the old unit real identical to this one? |
| Question: | How many amps does this pull |
| Answer: | I dont know, but the wire size is not all that big. Some versions of this are 9v battery powered which also suggests low current draw. |
| Question: | What is the actual hole size that it fits into?? The measurements shown seem a little larger than the one I need to replace |
| Answer: | The actual hole size that the back of the unit fits into is 5 1/4 inches by 2 inches. The hole is just a little bit bigger than the back of the unit. The outside front dimensions of the unit are 5 5/16 inch by 2 13/16. The unit takes awhile to actually start working. After installation and applying power the green light will blink for a good while before it goes steady green which indicates it is operating correctly. Do not try cleaning dust and dirt from the unit using a can of compressed air. I did and that is what made mine go bad. |
| Question: | Is this unit hard wired, and how big is the back ? I am replacing another unit |
| Answer: | Yes, this unit is meant to be hard-wired into a 12volt system. I'm planning to install it in my travel trailer tomorrow. The section that goes into the wall = 5 3/8"L x 1 7/8"W x 1 3/16"D (front panel that sits on the wall surface ~ 1/8" thick). |
Atwood Lp Gas Alarm Detector
Atwood
Product description
Provides the user with proper notification of dangerous levels of LP. Replace after 84 months of use after installation
- 12 volt
- LP Gas Only
- Model LP-DO Part No. 36719
- Overall size: 3" wide x 4" tall
- Cutout is 2 1/2" wide x 3 1/2" tall and 1" deep
User questions & answers
| Question: | What is the manufacturing date of the unit? I ask because they expire 84 months after manufacture..... if the unit has sat on the shelf 2 years... its |
| Answer: | Yes it has memory mode! So it comes on in the last setting you had it set to. |
| Question: | what is the expiration date |
| Answer: | If fully charge, the lamp should last 2-30 hours depending on the light mode. Breathing light mode can be standby for 100 days. |
| Question: | Is this a surface mount |
| Answer: | No idea. I can’t find anything this works with. The hole in the plug is so tiny it doesn’t fit anything I own. Waste of money to me. Sorry. |
| Question: | Can I get the mounting adapter plate...Part No. 35181 from you |
| Answer: | I am using it to charge a Boruit ‘headlamp’ that is powered by (2) Ultrafire 18650 2600mAh 3.7V Li-ion batteries. This plug plugs directly into the flashlight to charge so I don’t have to remove the batteries and put into a separate charger block. It also seems to charge much faster this way. |
Safe-T-Alert by MTI Industries 35-742-BL Dual LP/CO Alarm - 12V, 35 Series Flush Mount, Black
Safe-T-Alert by MTI Industries
Product description
The Safe-T-Alert 35 Series Dual Propane/Carbon Monoxide Alarm with Flush Mounting detects both gas leaks and carbon monoxide gas simultaneously; Twelve volts power means no missing or dead batteries to replace and this alarm is built for extreme RV environments; This product meets RVIA/NFPA requirements and is listed to UL 1484 RV and UL 2034 RV; Available in white, brown, or black
- Double-duty alarm detects both gas leaks and CO gas simultaneously
- Reliable 12V power means no missing or dead batteries to replace
- Flush mount
- Meets RVIA/NFPA requirements and is listed to UL 1484 RV and UL 2034 RV
- Dimensions: 6.375" W x 2.875" H x 1.25" D
User questions & answers
| Question: | What is the actual size? And what is the date manufactured |
| Answer: | 6.5" X 3" X 1 3/8" deep. Mfg date on back of it is 1/7/2119. Front says "Replace by 60 Months After Retail Sale. |
| Question: | How do you know when this detector goes bad? Other than the production date on the back of it? Mine is dated May |
| Answer: | I had the same problem - Dated August 19, 2016. Not excited if I have to replace this every 3 years or so, I must say. But that's better then it going off in the middle of the night for no reason! |
| Question: | Can i mount in any direction |
| Answer: | Why would you want to Mount it on an angle or upside down I really do not think the factory does that I’ve never seen it before are you serious mounted where the other one was and beside it needs to be mounted close to the floor Propane weighs 1 1/2 times more than air that’s why it’s mounted as close to the floor as it can be |
| Question: | what voltage does low voltage indicator come on |
| Answer: | When it goes below 12V |
MTI Industries 30-442-P-BR Safe T Alert 30 Series Propane/LP Gas Alarm - Flush Mount, Brown,12 Volt
MTI
Product description
The Safe T Alert 30 Series Propane/LP Gas Alarm is designed for the rugged RV environment and is ideal for Class A motor homes, Class B van campers, Class C mini-motor homes, travel trailers, fifth wheels, trucks and folding campers. It features advanced technology with an "Alarm Mute" button that silences the alarm when the RV is ventilated and rapid recovery sensor that resets when silenced or reactivates if dangerous levels of propane remain. Easy 12 Volt installation means there will be no missing or dead batteries to replace. Meets RVIA/NFPA requirements. Listed to UL 1484 RV.
- Power Supply and Current Draw: 12 vDC 90mA @ 12 vDC
- Alarm Point: < 25% LEL of Propane
- Operational Range: 12vDC +/- 15%
- Operating Temperature: -40° F to +158° F
- Loud 85 dB Alarm
- Dimensions: 6 3/8” W x 2 7/8” H x 1” D
User questions & answers
| Question: | I want to know the latest year this unit was made. The last answer to this was back like 2 or 3 years ago |
| Answer: | Yes |
| Question: | What year was this unit manufactured |
| Answer: | If the GasKnight is flashing blue and talking at the same time, this means that it is going through the 3-minute warm-up process. |
| Question: | I'm looking for a replacement for a pre tell 26. has anyone used this to replace a pre tell 26, specifically |
| Answer: | You are describing the standard 3 minute long warm-up process. This warm-up process takes place upon plugging in the GasKnight. Simply wait for the 3 minutes for the warm-up to conclude and ensure that the blue light blinks once every 5 seconds thereafter signifying that the detector is operational. Although you probably do not need it, Please message us through Amazon messenger and we would be happy to send you a replacement instructions manual. |
| Question: | This new detector doesn't beep when disconnected from the power supply. Is this normal |
| Answer: | The lifespan of the GasKnight is 5 years although it may last longer. It recommended to replace the GasKnight after 5 years to ensure the sensor continues to function properly. |
MTI INDUSTRIES 30442PBR 12V Propane/Gas Detector
MTI INDUSTRIES
Product description
SAFE T ALERT 30-442-P-BR 12 VOLT DC BROWN PROPANE ALARM FLUSH MOUNTED Built for the extreme RV environment. One-touch test/reset button. Alarm can be muted during ventilation, but will re-alarm if hazardous conditions recur. Flush mount detector fits all Fleetwood RVs. 30 SERIES-CLASSIC LP GAS ALARM Features: * Flush Mount, Brown * Meets requirements set by RVIA forLP Gas Alarmson RVs. * Test/Reset Button - Mute alarm during ventilation. Tests all detector functions with one touch.No dangerous gas required. * Alarm is fully operational during mute cycle and will realarm if hazardous conditions recur. * Dimensions: 6-3/8"W x 2-7/8"H x 1"D. * RV 12 Volt - Wire In Model. * Built for the extreme RV environment. * UL listed for Recreational Vehicles and Unconditioned Areas. * One Year Limited Warranty. * Replaces CCI Controls models 7770 and 7773 * 5 Year Lifespan (built-in timer) 30 Series Operating Specifications * Listed to UL 1484 for Recreational Vehicles and Unconditioned Areas. Meets RV standard ANSI A119.2 as required by the RVIA. * Power Supply and Current Draw 12 vDC 76 mA @ 12 vDC * Operating Temperature -31F to + 150F (-35C to +66C) * Alarm Point <25% LEL of Propane and Methane
- 30-442-P-BR
User questions & answers
| Question: | Is it black faced |
| Answer: | The 7770.2 is a standard CCI Pre Tel 22. This item will fit. The back of this item fits well within the recessed cutout, and the face covers the cutout on all sides. The screw holes will not line up. Pre Tel 22 screw holes are 6.25 inches apart. This unit’s screw holes are 6 inches apart. Both units have one lead and one ground. Your wires may be yellow (match to red) and white (match to black). |
| Question: | I have a cci control model number 7770.2 propane gas leak detector i believe it is bad will this fit in the cut out and doesn’t have a black and red |
| Answer: | Yes, it fit in the same hole as the PreTell unit. I had to make a new screw hole on one side due to a slight difference. Looks and works great. |
| Question: | Does this fit cci pre tell 22 ct out |
| Answer: | I can’t answer firmly because I never had the problem. May be a very small leak but I can’t be sure. |
| Question: | What does green going off and on over long peraiods of time mean |
| Answer: | It measures about 3.5 inches safely as some of the flowers on the bottom hang over the bad a tiny bit. I really fit well on our cakes and we had a three tiered cake with the top part being only 4 inch square cake. |
MTI Industries 30-442-P-WT Propane Gas Alarm – White
MTI
Product description
The Safe T Alert 30 Series Propane/LP Gas Alarm is designed for the rugged RV environment and is ideal for Class A motor homes, Class B van campers, Class C mini-motor homes, travel trailers, fifth wheels, trucks and folding campers. It features advanced technology with an "Alarm Mute" button that silences the alarm when the RV is ventilated and rapid recovery sensor that resets when silenced or reactivates if dangerous levels of propane remain. Easy 12 Volt installation means there will be no missing or dead batteries to replace. Meets RVIA/NFPA requirements. Listed to UL 1484 RV.
- Power Supply and Current Draw: 12 vDC 90mA @ 12 vDC
- Alarm Point: < 25% LEL of Propane
- Operational Range: 12vDC +/- 15%
- Operating Temperature: -40° F to +158° F
- Loud 85 dB Alarm
User questions & answers
| Question: | I have a 30-442 no p no -wt will this work the same or is their a compatable replacement? is this from the mfg |
| Answer: | For sure will be able to hear it.7 out of 10 sound level . |
| Question: | So i have a pre tell 2 in a 98 rv. it checks for leaks when turned on and won't allow gas to flow until the test is complete. does this model do that |
| Answer: | you may own Kidde 900-0076-01 KN-COPP-3 which looks similar but only detects carbon monoxide. |
| Question: | IS this a replacement for a Miti SA-8 propane detector |
| Answer: | download the manual from online http://www.manualslib.com/manual/111161/Nighthawk-Kn-Coeg-3.html |
| Question: | Is this ok to use in a regular kitchen (i.e. in a home not RV)? If yes, what do I need to buy to convert regular AC power to the 12V this unit uses |
| Answer: | As someone who went through firefighter 1 and 2 and got certified, yes. Natural gas will be detected by an "explosive gas detector." These detectors detect when natural gas or propane is approaching a percentage of the "Lower Explosive Limit", the percentage of the gas that needs to fill the airspace for combustion to occur. Since the two gases are different but are usually detected by the same sensor, they will go off for the gas that has a lower LEL for safety. If it goes off, leave your house imediately and call 911 for the fire department. Yes Natural gas has additives that make it smell like rotten eggs, but you can get used to this smell or it can be scrubbed entirely from the gas by dirt/soil. The latter is the cause of unexpected explosions in neighborhoods you may have periodically heard about in the news. Only way to know for sure is a detector. |
Safe-T-Alert by MTI Industries 35-741-BL Dual LP/CO Alarm - 12V, 35 Series Surface Mount, Black
Safe-T-Alert by MTI Industries
Product description
Safe-T-Alert by MTI Industries' 35 Series Dual Propane/Carbon Monoxide Alarm with Surface Mounting detects both gas leaks and carbon monoxide gas simultaneously. Twelve volts power means no missing or dead batteries to replace and this alarm is built for extreme RV environments. This product meets RVIA/NFPA requirements and is listed to UL 1484 RV and UL 2034 RV. Available in white or black.
- double-duty alarm detects both gas leaks and co gas simultaneously
- reliable 12v power means no missing or dead batteries to replace
- surface mount
- meets rvia/nfpa requirements and is listed to ul 1484 rv and ul 2034 rv
- "dimensions: 6-3/8"" w x 3-1/2"" h x 1-77/200"" d."
- Fit type: Universal Fit
User questions & answers
| Question: | I need one 6 inches wide. Mine looks this but dimension don’t match. Any suggestions |
| Answer: | Yes,if same APP Zigbee accessories can be capable |
| Question: | Whats the difference between the 35-741 an the |
| Answer: | Says that are based US led technology and no where on the light can I see Made in China. It's a great little headlamp! |
| Question: | Says you cannot ship to Camarillo, California. Why not |
| Answer: | Standard shipping or free shipping if your not in a rush |
| Question: | I need one 6 inches wide. Mine looks this but dimension don’t match. Any suggestions |
| Answer: | It doesn't weigh much. It's very comfortable to wear, and easy to carry. I put it in my waist bag, it’s not cumbersome at all |
Y201 Propane and Natural Gas Leak Detector; Portable Gas Sniffer to Locate Gas Leaks of Combustible Gases like Methane, LPG, LNG, Fuel, Sewer Gas; w/ Flexible Sensor Neck, Sound & LED Alarm, eBook
EG Air
Product description
As the only US based retailer of this Yeezou Y201 gas detector, we provide expert support with our chemist on staff to answer any technical questions. Buy confidently; this device is covered by EG Air's lifetime replacement guarantee. Also included/emailed is a 20+ page eBook on Gas & Air Quality Hazards.
FIND GAS LEAKS AT HOME:
Find the location of any natural gas, propane, LP or fuel leaks by running sensor probe along a gas pipe, fuel line, or fittings near any gas smells. Pinpoint fuel leaks from your lawnmower or car. Gas leak is found when alarm sounds and LEDs light up. Don't pay a technician's $100+ diagnostic fee when you can find a gas leak anytime with this propane & natural gas detector.
STEPS/TIPS ON USE: (see video at https://www.amazon.com/vdp/17873f5854174d4db2087794a60238be)
-To detect leaks while minimizing false alarms, turn the sensitivity dial upward toward (+) until the device begins to alarm away from any gas leak. Turn sensitivity dial downward (-) slightly until alarm stops and 1st LED just turns off. Now, any small increase of gas level (as from a leak!) will cause the alarm to sound.
-If alarm sounds prematurely, sensitivity needs to be decreased to prevent false alarms.
-Each leak varies in leak rate and background gas concentration, so adjust sensitivity level to find any leak.
-Allow device to warm up sensor for 10s until yellow “Warm Up” light turns off.
SPECIFICATIONS:
Maximum Sensitivity: 50 ppm
Alarm range: 0.1%-40% LEL
Warm up time: 10s
Response time: ≤2s (10% LEL)
Alarm: Visual with 6 Red LEDs, Audio with Variable Tone Frequency
Power: 3 AAA batteries
Package Includes:
-Gas Leak Sniffer
-Manual
-Protective Bag
- A GAS DETECTOR FOR MOST EVERY COMBUSTIBLE GAS: Locates the source of explosive gas leaks including natural gas or methane, propane, fuel including gasoline or kerosene, sewer gas, alcohol, butane, coal gas, ethane, toluene, and other flammable gases.
- PORTABLE & FLEXIBLE GAS LEAK DETECTOR: Powered by 3 AAA batteries, this portable gas detector sniffer can be taken anywhere to find gas leaks indoors or outdoors. Bend 12-inch length sensor neck in any direction along gas pipes or fuel lines in confined spaces to find gas leaks.
- VISUAL / AUDIO GAS INDICATORS: 6 LEDs with 85dB tonal alarm notify users of gas leaks and relative concentrations of natural gas & propane.
- ADJUSTABLE SENSITIVITY: Increase sensitivity dial to find small gas leaks. Decrease sensitivity to find larger explosive gas leaks while filtering out false alarms from background gas levels. If alarm sounds when turning on detector, sensitivity needs to be decreased toward (-).
- LIFETIME USA WARRANTY + ORIGINAL DESIGN: As the only US retailer of this item, we stand fully behind this product and will replace it if it ever breaks! We have a Midwest-based chemist on staff to answer any technical questions. Also included is a 20+ page eBook on Gas and Air Quality Hazards.
User questions & answers
| Question: | is this detector constantly plugged in like smoke detector |
| Answer: | I suspect it can. If you have wind conditions of course that would affect how much gas the detector would pick up but if it was close enough to the source it should work |
| Question: | How often should a gas detector be replaced? Every 5 years |
| Answer: | No. LPG, natural gas, and town gas, according to the instructions. |
| Question: | Is the alarm constant until the situation is addressed |
| Answer: | I looked at the instruction manual and the box and it doesn't say anything about being UL listed. It is built in China but I don't know if that has anything to do with what is or isn't UL listed. Sorry I couldn't help more. |
| Question: | Can I use with a battery |
| Answer: | Hello, this product does not detect carbon monoxide, please pay attention when buying. Propane cannot be detected, but methane can be detected. |
MTI INDUSTRIES 20441PWT 12V Propane/Gas Detector, White
MTI INDUSTRIES
Product description
* Meets requirements set by RVIA for LP Gas alarms on RV's * Built for the extreme RV environment * UL listed for recreational vehicles * Test/Reset button - test all functions with one touch Dimensions: 3.5"W x 2.5"H x 1.25"D
- Package Dimensions: 31.71 L x 10.74 H x 11.94 W (inches)
- Package Weight : 46.47 pounds
- Country of Origin : United States
- Part number: 20441PWT
User questions & answers
| Question: | I ordered a propone gas detector and was told it would take 3 months for delivery is this still the case |
| Answer: | They are made by USI Electric in Maryland, USA. |
| Question: | Does it also detect carbon monoxide |
| Answer: | This is a unit in itself and does not need Apple or Alexa to work. It works with Alexa voice control |
| Question: | Is this gas protector a replacement for the 20-441-p 90ma |
| Answer: | Yes,our home security kit support Zigbee as well. |
| Question: | my old one was wired to a 12v wall switch to turn it off and on when using the camper. will this hook up the same wiring |
| Answer: | Except the gateway hub. It must be plugged in Power supply. Still navigating system but seems like the siren requires charging every couple of days. Can still be wireless though. Motion detector and door sensor non rechargeable batteries. |
Natural Digital Gas Detector, Home Gas Alarm, Gas Leak Detector,High Sensitivity LPG LNG Coal Natural Gas Leak Detection, Alarm Monitor Sensor Home/Kitchen (1)
HSTMYFS
Product description
Product description:
Features:
Adopting high-quality semiconductor calefaction type sensor.
MCU intelligent supervise control and SMT chip technology.
Visual and audible alarm function.
LED numeric display technology, display instant gas leak thickness.
Three indicators: POWER, STATE, ALARM
Specifications:
Detecting gas: LPG, natural gas, and coal gas
Power frequency: 50/60Hz
Power supply: AC100V~AC240V
Rated load: <4W
Alarm thickness: LPG: 0.1~ 0.5%; natural gas: 0.1~ 0.3%; coal gas 0.1~ 0.5%
Alarm volume:≥85dB
Working environment: +14℉ - 122℉( -10 ° C ~ 50 ° C)
relative humidity <97 RH
Storage temperature: -13℉ - 131℉(-25 ° C ~ 55 ° C)
Package includes:
1 x Gas Detector 1 x English User Manual
- 【Detect Multiple Gases】- Home gas detector suitable for detecting LPG(Methane), natural gas, coal gas, gas fuel, artificial gas, liquefied petroleum gas, liquefied natural gas etc.
- 【LED Digital Display & Sound Warning】- Gas Detector offers Voice Notification and a digital readout of the GAS concentration.When gas leak concentration reaches presetting level, the alarm provides a visual and audible signal. 85dB alarm sound, reduce the risk of gas explosion and protect your family's life and property safety.
- 【Easy to Install】- Gas leak detector adopts Easy-to-install Design, can be used by plugging directly into the power socket to detect leaked gas.
- 【Widely Applyed 】-This product can be used as independent family alarm equipment, and also can be used as front detector of alarm system. Widely Used for Restaurant, Hospital,Hotel, Oil Factory,Garage, Gas Station etc.
- 【Precautions】- The system warm-up time is about 2-3 minutes. During this time period, the gas test will not work. You need to wait for the display to show 0 (the system enters the working state) before it can be tested normally.Gas leak detector adopts Easy-to-install Design, can be used by plugging directly into the power socket to detect leaked gas.
User questions & answers
| Question: | Where do I get one for home to detect natural gas leak. Must be battery operated as have no 120v outlets near ceiling |
| Answer: | Yes it works fine |
| Question: | Is this a us style plug |
| Answer: | No, this only detects gas. Check out the 70-742 KIT. (Must get the kit. The kit has the valve). This has a valve and detector. It will turn off the gas if the sensor detects a leak. |
| Question: | What is the operating temperature range of the gas detector? Can it work normally in cold places |
| Answer: | No it is not. The MTI SA-8 is 6.5 inches wide x 3.5 inches tall x 1.25 inches in depth. This unit is 12 inches wide x 8 inches tall x 4 inches in depth. |
| Question: | should i be alarmed if the detector starts to beep at 3 then go to 4 and continue to beep at |
| Answer: | Of course, you can. This uint certainly won't know the difference between a kitchen in an RV, or a home! As long as you supply it with the appropriate power source 12v..it will be fine. |
MTI INDUSTRIES 20-441-P-BL Detector Propane 12V Black
MTI INDUSTRIES
Product description
12 v. surface mount. White. 3. 5"W x 2. 5"H x 1. 25"D One Year . 76m A Current Draw. FALSE ALARM RESISTANT - InteleCheck circuit eliminates false alarms caused from momentary exposure to LP Gas, aerosols or cleaning products. Note: Safe T. R. I. P. Tip The recommended service life of a CO or LP Gas alarm is 5 years. Check the date code on the back of your alarms at least once a year. Test and inspect the CO / LP Gas alarms installed in your RV every week and replace malfunctioning alarms. Replace all CO / LP Gas alarms that are more than 5 years old, installed prior to 2001. Install only UL-RV listed CO / LP Gas alarms. Prevent accidents by teaching family and friends about the operation of the alarms. Never ignore a sounding alarm. Made in the USA.
- UL Listing for Recreational Vehicle Use - Meeting RVIA Requirements.
- Test/Reset Button - Mutes Alarm during Ventilation. Tests All Detector Functions with One Touch. No Dangerous Gas Required to Test Alarm.
- Wide Operational Range, 8-16 Volts. Avoids most Low Battery Voltage Alarms.
- Full Operation During Mute Cycle and at Extreme Temperatures -31°F to +150°F.
- Includes End Life Feature.
User questions & answers
| Question: | What is the size of this alarm |
| Answer: | Hello, actually the unit is good for 84 months after retail sale (when purchased by the end user). It say so right on the front of the unit. Thank You |
| Question: | Can I mount this rotated 90 degrees |
| Answer: | The actual life is 7 years of operation. The detector will monitor that and go into End Of Life mode after that. If you use your RV six months a year, it should last 14 years. However, for safety, it is best to change every 7 years regardless of actual use. That is 7 years from date of installation, not manufacture, so ignore the manufacture date when determining replacement. Record the install date so that you or a future owner will know the actual service age of the unit. |
| Question: | The description says white surface mount. i need to know if this product which is black a surface mount |
| Answer: | it can be but mine was a replacement to an old one and it fit back in the hole that was already there |
| Question: | Can this unit replace model |
| Answer: | No |
Propane | Natural Gas Detector, Gas Leak Detection, Home Gas Alarm, High Sensitivity LPG LNG Coal Natural Gas Leak Detection, Alarm Monitor Sensor for Motorhome | Camper | Marine (12V)
Product description
DC 12 V High Sensitivity LPG LNG Coal Natural Gas Leak Detector for RV Van Boat Camper Apartment Home for Anyplace where 12V is available.
Product Description:
Color:White
Material:Metal+Plastic
Size: 11.5cm/4.52"x7.2cm/2.83"x4.1cm/1.61"
Operating Voltage : 12V DC
Standby Current : ≤90mA
Alarm Current : ≤100mA
Warm-up (stabilisation) Time: 180s
Power Indicator : Green LED
Alarm Gas Level : 10 土 5 (% LEL), 0.5 士 0.25 (VOL %)
Alarm Indicator: red LED, flashing
Alarm Sound Level : ≥ 85dB/m
Failure Indicator: yellow LED on, continuous tone
Operating Temperature: -10C ～ +50C
Environment Humidity : ≤ 95 % RH
Installation : wall-mounted
Feature:
Easy to install, easy to deploy, flammable gas detector with 85db alarm
Detects propane, butane, LPG, natural, town, coal, common flammable gasses
12V model with non-polarised (reversible) power terminals for easy wiring
Suitable for leisure craft, vehicles and similar 12V scenarios, eg. campervan / motorhome / RV / yacht / boat / general marine
Two status LEDs indicating power, alarm and fault conditions
Easily-accessible 'alarm test' button
Easy to 'real-world' test: power the device, allow it to stabilise (180 seconds), bring safe gas source into proximity e.g. unlit gas lighter (caution advised)
Package Included:
1 x Gas Detector
1 x Manual
1 x screw
1 x rawlplug
Notes:
- Due to different producing batches, product details might be a little different. If you mind the difference, please buy it carefully.
- Please allow 3-5cm differs due to manual measurement.
- Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.
- Main function : Detect leaking gas in RV boat and anyplace that can provide 12 V power and give SOUND & LED alarm when gas- leaking happens.
- Automatically Reset After Alarm :This detector will automatically resume to detecting state after the gas dispersed
- Suit for multple scene and multple gas detection: This product can be used as independent family alarm equipment, and also can be used as front detector of alarm system. Widely Used for RV Van Boat Camper Restaurant, Hospital,Hotel, Oil Factory,Garage, Gas Station etc. Oaksay 12 V gas detector suitable for detecting LPG(Propane and Methane), natural gas, coal gas, gas fuel, artificial gas, liquefied petroleum gas, liquefied natural gas etc.
- Easy to install: Gas leak detector adopts Easy-to-install Design, can be easily wired by reading the wring instruction in the manual or the picture here.
- Warm Tips : Avoid installing the detector close to the following sources of interference: direct air flow from vents, fans, doors, windows, sources of steam, oil vapor, etc.
User questions & answers
| Question: | can this unit be operated on 24v dc |
| Answer: | If the dimensions don’t match, I would check to make sure the model number on both your old one & your new one are the same. We just entered the model number on the old one & did a search. The new one we got had the same model number on it! |
| Question: | Thanks so if the relay is built in then the green,white,yellow wires are there to connect to whatever it’s supposed to shut off in case of |
| Answer: | The 35-742 is a flush mount. The 35-741 mounts on the surface. |
| Question: | Does this use a battery backup |
| Answer: | Some items cannot ship to California due to Prop 65 restrictions. Thank you for understanding. |
| Question: | does this detect propane |
| Answer: | Use the model number off of your current detector |
MTI Industries 30-441-P-WT Safe T Alert 30 Series Propane/LP Gas Alarm - Surface Mount, White
MTI
Product description
The Safe T Alert 30 Series Propane/LP Gas Alarm is designed for the rugged RV environment and is ideal for Class A motor homes, Class B van campers, Class C mini-motor homes, travel trailers, fifth wheels, trucks and folding campers. It features advanced technology with an "Alarm Mute" button that silences the alarm when the RV is ventilated and rapid recovery sensor that resets when silenced or reactivates if dangerous levels of propane remain. Easy 12 Volt installation means there will be no missing or dead batteries to replace. Meets RVIA/NFPA requirements. Listed to UL 1484 RV.
- Power Supply and Current Draw: 12 vDC 90mA @ 12 vDC
- Alarm Point: < 25% LEL of Propane
- Operational Range: 12vDC +/- 15%
- Operating Temperature: -40° F to +158° F
- Loud 85 dB Alarm
User questions & answers
| Question: | Is this battery powered |
| Answer: | I don't know where you ordered your unit from but I received my unit from Amazon on April 30, 2020 and delivered May 9, 2020. |
| Question: | does this us a backup battery |
| Answer: | I looked this up on the MTI website and nothing is mentioned about it detecting Carbon Monoxide. It is a propane detector. |
| Question: | Is propane the same gas we use in our water heater and homes |
| Answer: | In the on-line manual it states: Current Draw: 90 mA@12VDC It appears this is a direct replacement per the MTI Indudtries webdite. |
| Question: | What are the actual dimensions of this detector? I think the dimensions listed on Amazon are for the whole package not just the detector. Thanks |
| Answer: | It should work the same but I question having a switch in line with a safety monitor what if you forget to turn the switch on and have a propane leak? |
Latest Reviews
View all
Ged Practice Book
- Updated: 28.06.2023
- Read reviews
64 Gb Micro Sd Cards
- Updated: 10.05.2023
- Read reviews
Baby Bed Connected To Bed
- Updated: 04.01.2023
- Read reviews
Plug In Coolers
- Updated: 05.01.2023
- Read reviews
Merrick Dog Foods
- Updated: 10.01.2023
- Read reviews