9 best sump pump solutions

Product description

Basepump HB1000-PRO, including battery powered high water ALARM. This is the water powered backup sump pump system using no battery and no charger to plug in or maintain. It is the solution to the problem of sump pump failure when water inflows are above average. Basepump has always been in a class by itself with its unique features such as being mounted on the ceiling, high above the sump. For this reason, it consistently removes more water per hour. The hydraulic float system makes it possible for Basepump to empty the sump to the bottom each time it runs. The PRO series is the result of homeowner feedback saying they want the higher capacity pumping of the HB1000 as well as back-flow prevention and simple installation. The included brass plumbing parts and dual check valve at a reasonable price answers this need. Make sure you can fill a 5 gallon bucket at your outside hose spigot, without the hose, in less than 30 seconds for this pump, so you know you have enough water flow to feed it properly. When testing your water supply, if you have a water softener, filter, or frost-proof spigot, the test will be inaccurate. Please call 800 554 1426 before ordering if you have any questions. Additionally, you may see that Amazon offers installation for what appears to be a reasonable price. Keep in mind that a basic installation is about a three hour job in most cases so consider that accordingly when obtaining bids from contractors.

• Highest pumping rates in the industry
• Dual check valve backflow preventer included
• No battery to maintain; No charger; No electricity
• Includes battery powered high water ALARM
• Brass shutoff valve and No-sweat push-in pipe fittings included. Works with Radon Sealed systems.

User questions & answers

Question:	What is the difference between the regular hb-1000 and the pro
Answer:	No. They will just put the pump in and connect to nearby pipe. But if other connections or copper piping is needed or if they need to break drywall to access then that will all be extra.
Question:	Does the expert installation include running a new copper pipe from city water
Answer:	There are a number of factors that go into this answer. The pressure is only one of them. The piping and any restrictions will affect the rates. The height of the pumping lift as well as the distance to the exterior. 40 Lbs. PSI is at the low end of the range for this model and unless you have the proper flow rate of water, it may not pump anything. We recommend testing the system before purchasing. This link shows you how: https://basepump.com/index.php/assets/Uploads/documents/Basepump/Residential-Easy-3-step-test-2016-05.pdf If Amazon blocks the link, go to the Basepump web site and find it on the Basepump page.
Question:	What is the gpm rating for the pump at 40 psi water pressure
Answer:	This pump is a fantastic pump designed to be a back-up pump. Depending on your needs and the volume of water, it may work as your primary pump. The difference is this pump can pump 1,100 GPH, while the high quality professional pumps I use as my primary pumps can do about 5,500 GPH.
Question:	why cant you use this to replace a sump pump all together
Answer:	No it is not adjustable. It’s slightly small for me being 6” tall but I still manage to do my leg workout

Product description

Here's How Pump Sentry Works Battery Back Up For Sump Pumps 1200 Watt Capacity 822PS Pump Sentry interfaces between a pump and its AC wall outlet. When AC utility power is present, the 822PS charges a battery and monitors the wall outlet to detect a power outage. At the moment utility power fails, the 822PS draws energy from a battery and converts it to enable pump operation. When utility power returns, the 822PS automatically switches the pump back to AC wall outlet power. At the same time, the 822PS resumes charging the battery to return it to full capacity in preparation for the next power failure. Pump Sentry interfaces between a pump and the AC electrical supply. When electricity is available, Pump Sentry charges a battery and monitors the power line to detect a power outage. At the instant that power failure occurs, Pump Sentry draws the energy stored in the battery and converts it to AC power. This AC power is automatically channeled to the pump to maintain its operation in the absence of electricity. When AC utility power is restored, the Pump Sentry reinstates AC utility power as the prime energy source to operate the pump. Simultaneously and automatically Pump Sentry commences the recharging of the battery, to return it to full capacity in preparation for the next power failure. Designed to operate most 1/2 Hp sump pumps.

• 1200 Watt Battery Back Up System, UL & CSA Approved
• Battery Cables Included, Rugged Aluminum Housing Compact Size
• For Wall Mount or Surface Mount Installation
• You will need to purchase (separately) a 12 volt deep cycle marine battery up to 200 amps
• 2 Year Factory Warranty

User questions & answers

Question:	Are these sturdy, good quality
Answer:	Yes. I am pleased with these products (battery + inverter/charger)
Question:	Does the addition of another battery meaning 2 in total double the run time during an outage
Answer:	Yes in theory but also depends on quality and age of the batteries your using plus how much your sump pump(s) has to run.
Question:	Can you connect more than one battery for longer run time
Answer:	If Amazon allow me to post the link here, the brochure tells you can connect several batteries. http://www.secamerica.com/wp-content/uploads/Pump_Sentry_2014_Brochure.pdf
Question:	Can you use this model with a 1/2 HP pump
Answer:	I called the manufacturer about using the 1/2 horsepower Wayne Sump I have with the 822 PS and they stated that the 822 PS could blow the fuse in the 822 PS due to it being 9 watts. I decided to buy the 1622 PS to be safe since if a fuse blew it would shut it down, so check with the company to be sure your sump pump will work properly.

Product description

The new PHCC Pro Series, "Pair of Pumps" combination systems, couples an energy efficient primary sump pump and battery backup sump pump into one compact system. The primary pump operates off AC power. If the power is interrupted, or more water is coming into the sump than the AC pump can handle, the backup sump pump will begin pumping automatically. The units come pre-assembled for easy installation and include four float switches for ultimate protection. Two floats with the primary pump, and two floats with the backup. The combination systems also contain unique monitoring features that warns the homeowner if the power goes out, battery fluid is low, backup pump was activated, or if the battery is discharged, defective, or battery terminals need cleaning. In addition the PS-C33 pump controller can send an alarm signal to a home security system or auto dialer. 1/3 HP - PSC motor Included with system: Primary pump. Backup pump. Backup system controller/charger with fluid sensor. Primary pump controller (DFC1) with caged dual float switch. 1-1/2 rubber union. Assembly includes two check valves and hardware. Sump Foot - raised platform for both pumps. Battery box. Battery fill bottle (battery not included)

• 3000 GPH flow at 10-Feet head with 31-Feet max head. Back-up 2400 GPH
• Automatically switches to battery power when AC fails
• Backup pump will assist primary pump if excessive amounts of water are entering the sump
• Detects irregularities, sounds an alarm, and pinpoints problems and solutions on control panel or to an auto dialer
• Primary 115 Volts, 60Hz. Back-up 9.0 Amps DC current

User questions & answers

Question:	Does this require an internet connection for tests
Answer:	No internet connection is required. The PHCC 2400 controller will run the pump about once a week. The pump failure light will come on if for whatever reason the pump does not work properly. For more information please contact our service team at 800-991-0466 option 3.
Question:	Will this work in an 18" diameter sump pit
Answer:	Yes, easily. The dimensions are 10"W x 11"D x 23.7" high.
Question:	If the primary pump can not handle the amount of water coming into the pit will the secondary start up
Answer:	Yes ! This is one of the few units on the market that does operate that way. Even though the discharge is 11/2" you should pipe the discharge out in 2" to take advantage of this feature.
Question:	Can i use marine (deep cycle) 24 series battery with it? and do i set it for non-maintenance free then
Answer:	Yes you can use those batteries. You set it for maintenance free with any batteries that you don't add acid to.

Product description

Raybend's Primary Sump Pump Backup Power Supply is an ideal solution for homeowners worried about keeping their basements dry during a power outage. Engineered to reliably handle either one Primary Sump Pump (12.5 Amps MAX) or two Primary Sumps simultaneously (6.25 Amps MAX each) with a pure sine wave output that is designed to simulate the characteristics of typical Utility Company generated 120 VAC home power. This system automatically switches from 12 VDC to 120 VAC when AC Power goes out and automatically reverts back when AC Power is restored. Charges and maintains the battery (Not Included) with a powerful 10 Amp built in Charger to quickly recover form any extensive outage.

• Automatically switches over to Battery Power when AC power goes out. (Battery Not Included. A Deep Cycle AGM Battery is Recommended)
• Generates a Pure Sine Wave 120 VAC voltage to reliably power your primary sump pump
• Automatically recharges a Battery When AC Power is restored with a powerful 10 Amp Built-in charger
• 1500 Watt Output is enough to power two Primary Sump Pumps simultaneously (6.25 Amps Max each)
• Can be used as a power inverter for many applications requiring backup power

User questions & answers

Question:	Would this unit work with a 12v 100ah deep cycle lifepo4 3000+ life cycles rechargeable lithium battery
Answer:	Yes. That battery will work perfectly with this system.
Question:	have a question re. the charging light - it does not turn on at all even if the charging switch is on after installation. Is this a defect
Answer:	The red light should be on if the battery is charging. The green light then goes on when the battery is charged. If the red light never goes on there is something wrong.
Question:	Does the charger require an external battery management system for lead acid batteries to handle over charge
Answer:	No it doesn't. It is automatic as long as you use a marine battery, deep cycle.
Question:	How long should the inverter take to charge the battery
Answer:	When I plugged the battery into the inverter it took about 6 hours too charge then the 2 green lights displayed which means inverter is charged. The green lights stay on

Product features

One Primary Sump Pump

Efficiently powers one sump pump with a maximum draw of 12.5 Amps.

Two Primary Sump Pumps

Provides ample power for two sump pumps with maximum draws of 6.25 Amps each.

Other Backup Power Applications

Securely functions as a power inverter for applications that require backup power

Powerful 10 Amp Charger

Quickly charges your battery when AC power is available.

Two Grounded Outlets

Safely power two primary sump pumps with maximum draws of 6.25 Amps each.

Automatic Power Detection

Automatically detects when a power failure occurs and provides AC power to connected sump pumps.

Easy Installation

Easily become prepared for power outages with hassle-free installation.

Product description

Pedestal sump cover great for pedestal type pumps or when backup pumps get in the way of a flat cover. The clear door panel is removable for easy access to your pump and should allow for pump replacement without removal of the entire cover. The door panel is clear lexan and seals against a foam gasket. High rise cover measures 22" high by 21" wide. Sump Cover comes with the following accessories: 5 pipe seals - 2", 1-1/2", 1-1/4", 2" cord seal, 10.1 oz tube of Dap Black Silicone Caulk. Seal size fits outside diameter of PVC pipe. A permanent radon pipe can be installed on the top of this cover if used for this purpose.

• Easy Access High Rise Sump Cover
• 5 pipe seals - 2", 1-1/2", 1-1/4" and 2" cord seal
• 10.1 oz tube of Dap Black Silicone Caulk
• Great for radon systems or reducing dampness and odors too

User questions & answers

Question:	What’s the outside dimension of the bottom lip where it sits on the ground
Answer:	The cover comes with no holes in the top. You can add a 4” pipe and as many others that can fit on the top surface. Also pipes can come through the side as well. Please see our store for the rubber seal for 4” pipe.
Question:	Can i cut a secondary hole in top for a radon mitigation pvc pipe ? it would be a 4 inch pipe
Answer:	From concrete floor to top of enclosure is exactly 22 inches
Question:	How tall is the entire enclosure
Answer:	There are no hinges. The Lexan panel is held in place by the vertical aluminum guides and 2 thumb screws hold it down against the gasket.
Question:	Does the door have hinges, swing left or right (or reversible) or is it merely a hatch that is removed and replaced for access
Answer:	The discharge is 1-1/4" FNPT
Question:	What is the diameter of the discharge hose
Answer:	The exact diameter of the pump is 6-9/16"
Question:	What is the maximum diameter of the pump housing?? I am trying to fit it down a pipe
Answer:	The full model number is 32Z707U6.3SA. See Ebara's technical section at http://www.pumpsebara.com/docs/EPD-Opt_tech.pdf
Question:	Is the model number 32Z707U
Answer:	The power cable is 20' long
Question:	We need to know how long the power cord is on this unit. ( Optima 3 MS
Answer:	They are exactly the same pump except the PRO also includes the following: Brass Dual Check Valve to help you meet local backflow prevention requirements. Brass shutoff valve so the water to the unit can be shut off easily, if necessary. Brass Push-fit Male adapter so all you do is push in the pipe to connect to the pump. Brass Push-fit Tee to connect into your existing water supply.Since all these items are needed in nearly every installation and they would cost the same or more to get them all locally, the PRO is the best value, as long as the dual check valve is accepted in your local plumbing jurisdiction. If not, and you need a different type of back-flow prevention device, then get the standard model and the correct back-flow device separately.

Product description

This product is high quality product and highly durable. This is easy to use and easy to install. This product is manufactured in United States. When you have residential or commercial wastewater issues, you can count on Zoeller Pumps to deliver the very best solutions-our commitment to top quality offers you years of service and durability.

From the Manufacturer

When you have residential or commercial wastewater issues, you can count on Zoeller Pumps to deliver the very best solutions-our commitment to top quality offers you years of service and durability. Includes 25' cord with plug.

• 1/2 H.P. motor
• 2" NPT Discharge & Passes 2" spherical solids
• Non-clogging vortex impeller design
• Durable cast iron switch cap, motor, and pump housing
• Not effected by materials normally found in drainage and sewage sumps

User questions & answers

Question:	This pump 230volts
Answer:	115 gpm @ 5ft lift 85 gpm @ 10ft lift 45 gpm @ 15ft lift
Question:	What are the gpm or gph of this pump
Answer:	No, it is not a grinder. It does have a fairly large intake (2") and can pass a fairly large piece of debris ( look it up, I think it passes at least 1.5" but you should check).
Question:	is this a grinder pump
Answer:	120V
Question:	What is the voltage
Answer:	Outside diameter of the bottom of the cover is 21".

Product description

The Basement Watchdog Big Combo is a pre-assembled, energy-efficient 1/2 HP primary sump pump combined with the number one selling Basement Watchdog Special CONNECT Battery Backup Sump Pump System. It’s the D.I.Y. solution for replacing your current sump pump with an efficient, cost-saving one that includes a redundant battery backup system with 24 hour a day monitoring and a Wifi capable controller. With two sump pumps in your sump pit, continuous monitoring and remote notification allowing you to receive texts, emails and in App alerts you can feel safe that your basement is protected. The system is easy to install with little or no plumbing knowledge required. The ½ HP Cast Iron primary pump provides outstanding capacity—pumping up to 4,400 GPH at 0 ft. lift. The backup sump pump is battery-operated, and pumps at 2,600 GPH at 0 ft. lift. The backup sump pump can run intermittently for days on a single battery charge from either the Basement Watchdog Maintenance-free AGM battery (BW27AGM) or the flooded lead-acid battery (30HDC140S). The WiFi capable controller monitors the pump, power, and battery conditions 24 hour a day. Plus, the controller exercises the pump weekly to make sure it stays healthy. A remote terminal provides easy connection to a security system, auto dialer or other dry contact device. The backup controller also includes a USB port that connects to the Basement Watchdog CONNECT WiFi module, allowing you to receive texts, emails and in App alerts for the ultimate peace of mind when you’re away from home. You can feel safe that The Basement Watchdog is WATCHING OUT FOR YOU!

• 1/2 HP energy efficient permanent split capacitor (PSC) primary pump can save money on your electric bills
• Primary pump capacity 3,540 GPH at a 10 Ft. lift and 4,400 GPH at 0 Ft. lift. Backup system capacity 1,850 GPH at 10 Ft. lift and 2,600 GPH at 0 Ft. lift
• Includes a WiFi capable battery backup system that provides 24 hours a day monitoring of pump, power and battery conditions, backup controller will sound an alarm, illuminates a warning light and describe what to do for easy maintenance
• Allows for connection to a Basement Watchdog CONNECT Module (BW-WiFi or BW-HZM), giving you real time alerts via text, email, or through the Basement Watchdog App
• Provides days of intermittent pumping power on a single battery charge and is compatible with both wet cell and maintenance-free AGM batteries. Connect two batteries in parallel for double the run time

User questions & answers

Question:	Is the back up pump submerged under normal operation
Answer:	Yes, both the primary and backup pumps on this system are completely submersible. For more information please contact our service team at 800-991-0466.
Question:	What is the min size basin this fits into? I have a 12 by 12 by 24 in deep basin will it fit
Answer:	The dimensions on this product are 8.75 x 11.75 x 18 inches so if your basin is 12" wide it should be able to fit. For further information I would recommend calling our service team at 800-991-0466 option 3,
Question:	can you use any 12 volt battery for back up
Answer:	You would need to use a 12v Deep cycle standby battery with this system in order to run the backup pump. The battery can be either a maintenance or maintenance free one and look for an amp hour rating of around 75 or higher. For more information feel free to contact our service team at 800-991-0466 option 3.
Question:	If i have one of the connect modules, and the power goes off to my router, what notification do i receive
Answer:	You would receive a message stating that the connection has been lost. This can be setup to send messages through email, text, and the Wi-fi app on your phone.

Product features

Pre-Assembled for Easy Installation

When you buy a Basement Watchdog Combo (Model CITE-33), most of the plumbing has been done for you. The primary AC sump pump and battery backup pump come pre-assembled, including check valves, elbows and pipe already measured and glued, making it fast and hassle-free for you to install the best protection in the industry.

24/7 Monitoring

The controller for your Basement Watchdog Combo (Model CITE-33) sump pump system provides crucial, 24-hour-a-day monitoring of pump, power and battery conditions, ensuring your system is ready to protect. The easy-to-understand controller detects irregularities, sounds an alarm, and visually pinpoints problems and solutions on the front panel.

Automatic Protection

With the Basement Watchdog Combo (Model CITE-33) on guard, you know your basement is always protected. The control box automatically monitors the system, and should the power go out, the battery backup sump pump will take over to keep your basement dry.

Two Dual Float Switches—Four Times the Protection

The Basement Watchdog Combo (Model CITE-33) includes two sets of micro-reed Dual Float Switches. We introduced this technology, proven reliable in other uses for over 50 years, to the pump industry and improved it by including two floats on each pump. Simply stated: if two is good, four is better.

30+ Years Protecting Basements

The Basement Watchdog has been protecting homes for over 30 years and continues to lead the pack. We build the most dependable, user-friendly pumps in the industry using intelligent design, premium components, and quality manufacturing practices that include thoroughly testing every single unit.

Pumping Power

The Basement Watchdog Combo (Model CITE-33), our most economical option, moves 3,720 GPH at 0' height (3,100 GPH at 10' height) from the primary AC sump pump, and 2,000 GPH at 0' height (1,000 GPH at 10' height) from the battery backup sump pump. Plus, both the primary and backup can run simultaneously, providing extra capacity if needed.

Automatic Charging

The Basement Watchdog Combo (Model CITE-33) is equipped with an automatic charger that helps extend the life of the battery while maintaining the maximum charge on the battery without overcharging. Plus, it’s compatible with our wet cell and maintenance-free batteries.

Matching Batteries

The Basement Watchdog Combo (Model CITE-33) is designed to be used in conjunction with any of our batteries: The Maintenance Free Standby Battery (Model BW-27AGM), the Big (wet cell) Standby Battery (Model 30HDC140S), or the Emergency (wet cell) Standby Battery (Model 24EP6).

Product description

PumpSpy protects your home from basement flooding due to sump pump failure. PumpSpy is the only company that watches your sump pump, backup pump and battery for problems 24 hours a day. In the event of a sump pump failure or power outage, PumpSpy automatically activates the backup pump and sends you instant alerts. The PumpSpy PS2000 connects to your home's WiFi and connects to PumpSpy's Remote Monitoring Service. View real-time data anytime with the FREE PumpSpy app. PumpSpy tracks your sump pump activity and alerts you to any potential malfunctions before flooding can occur. Even when there's no rain, PumpSpy makes sure your sump pump, backup pump and battery are always ready for the next storm with system tests every 2 days. PumpSpy's backup pump sits next to your main pump and is automatically activated in the event of a main pump problem or power outage. The backup pump is also activated if the main pump cannot keep up with excess water. PumpSpy's powerful backup pump removes 3600 gallons/hr. at 0' or 2400 gallons/hr. at 10' lift. You never have to check on your sump pump again! PumpSpy watches it for you 24 hours a day! Made in the USA with U.S. and imported parts.

• Free monitoring included! No monthly charges or subscriptions required. Connects to your WiFi for data connection.
• Works with any 120-Volt primary sump pump! Simply plug your sump pump into the 120-Volt outlet on the PumpSpy controller for PumpSpy to start watching your sump pump.
• Get instant alerts on your phone with the FREE PumpSpy app. Check on your pumps from anywhere with your mobile device.
• PumpSpy computers watch your main sump pump, backup pump and battery automatically, 24/7 and run system tests 3X per week.
• PumpSpy products are made in USA from domestic and imported parts

User questions & answers

Question:	Am I able to plug a diffrent sump pump into this system I have a 1.5 hp 10000gph sump pump 110v will this be able to handle that for a couple hours
Answer:	You can plug in any 120V pump, as long as the motor rating is less than 15 amps.
Question:	Can you opt-out of the remote testing they push through every 48 hours
Answer:	The system self tests are not pushed to the units. The hardware initiates the self test and sends the data to PumpSpy. Even if the device is not connected to the internet, the system will still perform the self tests.
Question:	This question is for the manufacturer. If my power goes out and WiFi goes out, how do you alert me of my pump status
Answer:	"On Nov 5, 2019, at 11:27 AM, PumpSpy Tech Support wrote: "Hello, "If you don't want to upgrade, your current cellular service that relies on Verizon will reportedly continue until 12/31/2020." Greetings, Thanks for the prompt reply. PumpSpy: "Beyond that date, WiFi is the only service we can support." The only service you can support or the only service you plan to support? I believe PumpSpy is making a business crippling move to only have WiFi as an option. Does your internet stay operative during a major storm power outage? Ours does NOT! Cellular towers are much more likely to have power backups than ISP nodes. ISPs also vary widely in the speed and quality of their internet. Where I live 5G will probably put Frontier Communications out of the internet business with their abysmal 6-12 mbps speed. Wave Broadband, where available, has gig internet but it goes down during major power outages when PumpSpy is most needed. Cell coverage and my PumpSpy monitoring has stayed effective during these storms. My advice to PumpSpy is to start working on a 5G upgrade. Having only WiFi as an option is NOT an option for my multiple properties. PumpSpy: "We are offering customers an option to do a WiFi upgrade now and extend their product warranty. If you convert now before the end of this year we will add 5 years to your warranty. If you wait until 2020 we will only extend it for 3 years. "Regarding upgrading, there are 2 upgrade choices: "PumpSpy PS2000UG WiFi Upgrade for Cellular PumpSpy System PS1000 for $249 ( https://www.amazon.com/PumpSpy-PS2000UG-Upgrade-Cellular-System/dp/B07YSWGFW3/ref=sr_1_fkmr0_2?keywords=pumpspy+ps+2000+upgrade&qid=1572972309&sr=8-2-fkmr0). "PumpSpy PS2000UG WiFi Upgrade for Cellular PumpSpy System PS1000 (Controller ONLY) FOR $184 ( https://www.amazon.com/dp/B08124S1S2/ref=sr_1_fkmr0_1?keywords=pumpspy+ps+2000+upgrade&qid=1572967878&sr=8-1-fkmr0). "We recommend the upgrade with the UPS battery backup for your WiFi modem if you don't already own one, to keep your PumpSpy connected in a power outage." WiFi will NOT keep my PumpSpy connected during a storm created power outage. You are turning PumpSpy into a circuit breaker and pump health and activity monitor. Disappointed
Question:	Does the backup pump test cycle even if the sump well is dry? If so, isn’t that bad for the pump
Answer:	The backup pump is designed to run for short periods of time in a dry situation.

Product features

The Problem

A sump pump is typically among the least of a homeowner’s worries until it starts raining. Hard.

Then the questions begin:

• Is my sump pump working?
• How would I know if there’s a problem?
• Is my basement flooding?

For many homeowners, they find out their sump pump has a problem when it’s too late. The basement is flooded and has left behind a home in need of repair, a huge cleanup project and potentially thousands of dollars in damaged or ruined property.

The PumpSpy Solution

PumpSpy 24/7 Remote Monitoring Watches Main Sump Pump, Backup Pump and Battery

PumpSpy’s servers monitor your sump pump system automatically. PumpSpy detects problems and sends alerts as soon as a problem is detected! PumpSpy constantly monitors your complete sump pump system for proper operation.

Instant Notifications and Alerts

Receive instant, detailed alerts on your mobile devices for your main sump pump, backup pump, battery charge and water alerts.

Automatic Backup Pump Operation

In the event of a main sump pump problem or power outage, the PumpSpy battery back-up pump automatically activates.

Automated System Tests 3X Per Week

PumpSpy tests your backup pump and battery, then analyzes the test data to make sure your system is in top working order!

High Quality Components Assembled in the USA

All PumpSpy electronics and pumps are assembled in the USA. Circuit boards are sealed in waterproof epoxy potting for protection from damp environments.

Instant Alerts On Your Smart Phone!

PumpSpy sends instant alerts to your phones and other devices when an issue is detected:

• Main Pump Failure
• Main Pump Running Excessively
• Blocked or Frozen Discharge Line
• Power Outage
• High Water Level
• Battery Charge Low
• and any more!

Check On Your Pumps Anytime!

Check the real time status of your sump pump system anytime with the PumpSpy app:

• Internet Connection Status
• WiFi Signal Strength
• AC Power Status
• Main Pump Status
• Backup Pump Status
• Battery Voltage and Charge %
• Water Level Status

Real Time Pump Information and Data!

See detailed information on your sump pump system's operation:

• Pump Cycles Today
• Last Cycle Time
• Estimated Gallons Pumped
• Total Pump Cycles by Date
• All Pump Cycles by Date with Timestamps

Product description

Superior Pump builds pumps that are truly Built to Last and are 100 percent factory tested. Superior Pump uses quality components including solid copper motor windings, heavy duty stainless steel jacketed shaft seals, double o-ring seals on motor plate, and electronically controlled split capacitors. Superior Pump model 92572, 1/2 HP thermoplastic submersible sump pump with vertical float switch, will move water up to 3300 gallons per hour. Upgraded durable stainless steel impeller for improved performance. Equipped with suction screen to filter out large debris and handles up to 3/8-inch solids with ease. This pump is UL/CUL listed and CSA certified and backed by a 3 year warranty.

From the Manufacturer

Superior Pump is a family owned and operated Pump Company specializing in residential / light commercial duty pumps. Headquartered in Minneapolis, Minnesota, Superior Pump was founded in 1999 after spending years in the pump industry dating back to the 70's, and with a plumbing background starting in St Paul Minnesota dating all the way back to 1885. Superior Pump adheres to our strong core family values, selling the absolute highest quality product possible. Known for building durable pumps, Superior Pump concentrates on quality throughout the engineering, manufacturing and testing processes. Quality products, strong warranties, excellent USA based customer service - Superior Pumps Built to Last!

• 1/2 HP Sump pump moves up to 3,300 gallons per hour; pump will lift water up to 25' of vertical height
• Tough thermoplastic construction; 10-foot cord length
• Vertical float switch to automatically turn the pump on/off
• 1-1/2 inch NPT discharge for high capacity pumping
• Superior Pumps are Built to Last, engineered with quality components and are 100% factory tested

User questions & answers

Question:	can I use this with RO water
Answer:	Hi Wayne,The thermoplastic pump will work better in this application than a cast iron one. There is an aluminum motor plate that is exposed and this could oxidize in an RO environment.We do not recommend our pumps to be used for these.Thanks
Question:	Can this be used as a utility pump
Answer:	Sure It's more powerful than a standard utility pump and would require an adapter to neck it down from 1-1/2/1-1/4" to 3 /4" garden hose thread but it will work provided there isn't much of sand in the water should only be used with clear water and would have to manually activate float switch by hand if the water is not deep enough to activate float In addition, this pump will only pickup water approximately 1" off floor whereas a utility pump can typically pickup down to 1 /4" , or le ss, off floor This pump should not be fun dry - water must be in intake at all times when running
Question:	What size basin will this fit in
Answer:	If you secure it so that vibration does not move it around, it should work fine in a 12" diameter basin. I have it in a larger one (15"). If the float touches the side, you are obviously in trouble.
Question:	Title says "with vertical float switch" while the description says "can be used as a sump pump by adding an optional float switch". Which is it
Answer:	It was confusing to me as well. However my purchase had the vertical float in the box. I had to attach it though. No big task

Product features

Superior Pump 92572 1/2 HP Thermoplastic Submersible Sump Pump with Vertical Float Switch

Superior Pump builds pumps that are truly Built to Last and are 100% factory tested. Superior Pump uses quality components including solid copper motor windings, heavy duty stainless steel jacketed shaft seals, double o-ring seals on motor plate, and electronically controlled split capacitors. Superior Pump 92572 1/2 HP thermoplastic submersible sump pump with vertical float switch, will move water up to 3300 gallons per hour. Upgraded durable stainless steel impeller for improved performance. Equipped with suction screen to filter out large debris and handles up to 3/8 inch solids with ease. This pump is UL/CUL listed (E238091, by UL, 2019) and CSA certified (230584, by CSA, 2019)

Automatic Switch

• Vertical float switch automatically turns on and off pump depending on the water level in the sump basin/pit.
• Piggy-back power plugs allows the pump to be used as either an automatic or manual pump.

Construction and Discharge

• Thermoplastic construction is corrosion resistant and offers years of performance and reliability.
• 1-1/2" NPT discharge for use with 1-1/2" discharge pipe.

Intake Screen

• Intake screen filters out debris from entering the impeller. This helps reduce the clogging and prolongs the life of the pump.
• Easily to clean and is removable.

Motor and Performance

Motor

• 1/2 HP Superior Pump continuous duty, thermally protected - split capacitor motor

Performance

• 3300 Gallons per hour at 0'
• 2520 Gallons per hour at 10'
• 1500 Gallons per hour at 20'