12 best sub pumps
A sump pump, often referred to as a "sub pump," is a crucial piece of equipment used in residential and commercial buildings to prevent water damage caused by flooding or excess groundwater. Here is what you need to know about sump pumps:
Purpose: Sump pumps are designed to remove excess water that accumulates in a sump pit, typically located in the basement or crawlspace of a building. The primary purpose is to prevent water from flooding these areas and causing structural damage or other problems.
Sump Pit: The sump pump is installed in a sump pit, a small pit or basin dug into the ground below the lowest point in the building, where water tends to collect. When the water level in the pit reaches a certain height, the sump pump activates to pump the water out and away from the building.
Types:
- Submersible Sump Pumps: These pumps are fully submerged in the sump pit and are designed to handle heavy-duty pumping tasks. They are quieter and more discreet than pedestal pumps.
- Pedestal Sump Pumps: Pedestal pumps have the motor located above the sump pit water level and the pump at the bottom. They are typically less expensive but can be noisier and less efficient than submersible pumps.
Automatic vs. Manual: Most sump pumps are automatic, equipped with a float switch or other sensors that activate the pump when the water level rises to a certain point. Manual sump pumps require the user to turn them on and off as needed.
Backup Systems: To ensure continuous operation in case of power outages or pump failures, many sump pump installations include backup systems. These may consist of battery-operated pumps or water-powered pumps that can kick in when the primary pump is unable to function.
Discharge Pipe: Sump pumps are connected to a discharge pipe that carries the pumped water away from the building and releases it at a safe distance, often through a pipe that leads to the outside or into a storm drain.
Maintenance: Regular maintenance is essential to ensure that the sump pump functions correctly when needed. This includes cleaning the sump pit, checking the float switch, testing the pump, and inspecting the discharge pipe for clogs.
Choosing the Right Size: The capacity of a sump pump is measured in gallons per minute (GPM) or gallons per hour (GPH). It's important to choose a sump pump with the appropriate capacity for the expected water flow in your area to ensure effective flood prevention.
Installation: Proper installation is crucial for the effective operation of a sump pump. It should be installed by a qualified professional to ensure it meets local building codes and is set up correctly.
Cost: The cost of a sump pump varies depending on the type, capacity, and features.While basic models can be relatively affordable, more advanced systems with backup pumps and alarms may be more expensive.
In summary, sump pumps, often referred to as sub pumps, are essential tools for preventing water damage in buildings by removing excess groundwater or floodwater from sump pits. They come in different types, with varying features and capacities, and play a crucial role in maintaining a dry and secure environment, especially in basements and crawlspaces. Proper installation and regular maintenance are key to their effectiveness.
Below you can find our editor's choice of the best sub pumps on the marketProduct description
Features:
- 1/2 HP 400W submersible dirty clean water pump, with float switch and 25ft power cord, to help move dirty water away, for household or utility use
- Powerful Pump - Powered by a 1/2 HP oil-cooled electric motor for draining 2113 gallon per hour quickly
- Safe Use - Built-in automatic power shut off mechanism by auto float switch for preventing the coil from getting burned when pump fails to pump water
- Durability - Engineered Resin Construction for long serving time under water
- Wide Application - Great for household or utility use, such as swimming pools, cellars, garden pond or flooded road
Specifications:
- Overall Dimension(LxWxH): 6 9/16" x 6 1/4" x 12 7/16" (16.7 x 15.8 x 31.6 cm)
- Power Supply: 115V/60Hz/400W (1/2HP)
- Cable length: 24 11/12 ft (760 cm)
- Q.Max: 2113 gph (8000L/H)
- H.Max: 16 5/12 ft (500 cm)
- Max Submersible Depth: 23 ft (700 cm)
- Diameter of Hose: 1", G1", 1 1/4", G1 1/2" (From Up to Down)
- Max Drainage Temperature: 35
- Max Particle Size: 1 3/8" (3.5 cm)
- Material: PP Plastic, Copper Wire
Package Contents:
- 1x Water Pump
- 1x Manual
- UL CERTIFICATION: 1/2 HP 400W submersible dirty clean water pump with float switch and 25ft power cord, a safe standard for Swimming Pool Pumps, Fountain Pump, Filters etc. Buy our Sump Pump with Confidence to help move dirty water away, for household or utility use
- SAFE USE: Built-in automatic power shut off mechanism by auto float switch for preventing the coil from getting burned when pump fails to pump water
- DURABLE & STURDY: Heavy duty engineered Resin Construction for long serving time under water, can prolong this submersible pumps life expectancy
- 1/2 HP WATER PUMP: Powered by a durable oil-cooled electric motor,runs, H.Max: 16 5/12 ft, draining 2113 gallon per hour quickly
- WIDE APPLICATION: Ideal for handling such tasks as draining water from a basement or a shallow flooded area, draining or refilling your swimming pool, pond or simply a bath tub, great for household or utility use, such as swimming pools, cellars, garden pond or flooded road
User questions & answers
Question: | How long is the electric cord and what size hose pipe can you use |
Answer: | I have city water too. The foam filters are really the debris catchers- I have a Golden Retriever who plays a lot outside and any dirt or fur (she sheds a lot) is caught n the foam instead of blocking the pump. The carbon filters I guess could be eliminated given your water supply. I change the fountain about every two -three days and the carbon filter may eliminate things I can't see. Obviously fresh water is the goal. hope that helps |
Question: | How many gallons of water does this pump move per hour |
Answer: | I always put black up. But I’m not 100% accurate that is correct. |
Question: | What size tubing should I buy to use with this |
Answer: | It’s round. |
Question: | Anyone have a copy of the manual? I can't find it online. Trying to finally close the pool and it won't start for some reason |
Answer: | Absolutely. Mine worked fine. |
Product features
Yescom 1/2 Hp Submersible Water Pump
Our submersible pool pump features powerful, high efficiency, sturdy construction, lower maintenance costs and works quietly. Ideal for handling such tasks as draining water from a basement or a shallow flooded area, draining or refilling your swimming pool, pond or simply a bath tub.
At Yescom, we strive to provide our customers with great products and excellent service.
Reliable
- Sturdy and Solid construction
- UL Safety
Great Powerful Sump Pump
- Power Supply: 115V/60Hz/400W (1/2HP)
- Heavy duty motor runs underwater about 23ft,empties and fills your pond with ease
Quiet pond pump
- Very silent and quiet, you can't hear the motor run if you’re 10 or 15 feet away
Product description
Fills and drains three times quicker than any other pump on the market. The Eight.3 Submersible Pump is powered by a 12 amp fuse thru a 12 volt plug. This pump is perfect partnered up with any Eight.3 ballast bag.
- Anti-airlock protection
- Won''t burn impeller if left on without water
- Stainless steel impeller shaft
- Rust and corrosion protection
- 12V DC cigarette adaptor
Product description
These submersible water pumps are great for everything from fountains to hydroponic systems. The pumps have an inside threaded fittings and the flow is non-adjustable. Powerful oil-free, rare earth rotor magnet. Ceramic shaft and bearing insures reliability. Trouble free one moving part. Strainer protects impeller from damage. Comes with a 120 volts cord. Include inlet and outlet fittings.
- 1083 Gallons per hour; 89 watt motor
- Included fittings: two-.75“ Barbed x 1“ Threaded, two-.5“ x 1“ Threaded and 1“ Barbed x 1.25“ Threaded
- Suitable for installation on dry land for in-line use or submerged in the water
- Pre-wired 175 inch 120v power cord
- EcoPlus Fixed Flow Rate Submersible or Inline pumps are great for a variety of application including hydroponics, aquariums, ponds and more
User questions & answers
Question: | Does this pump have adjustable speed |
Answer: | Hey there! Well, while we don't offer personalized maps on Amazon, we do offer all of our pin colors. So you can definitely make that happen. Personalizing maps through Amazon is tricky so we only make that available through our website. Hope that helps! |
Question: | pound of pressure |
Answer: | Just wondering if customizations are at all available yet? |
Question: | What size is the incoming water supply on the 1056 model? Want to use the Active Aqua Bottom Draw Adapter with it to pull water from bottom of tank |
Answer: | Hi there, this is the only version of this map we have at the moment! - Johann (Earthabitats) |
Question: | Would this pump be able to lift water to about 6-7 feet from a pool |
Answer: | The map comes with some drawings to mark landmarks, like the Statue of Liberty in New York. And there are also additional stickers to mark where where things have taken place for you, like snorkeling. |
Product features
EcoPlus Eco 1056 Water Pump Fixed Flow Submersible Or Inline For Aquariums
EcoPlus Fixed Flow Rate Submersible or Inline pumps are great for a variety of application including hydroponics, aquariums, ponds and more. These magnetic driven pumps are constructed with a high quality rare earth rotor magnet which helps deliver an efficient, powerful and constant water flow. Pumps are oil-free and have a ceramic shaft impeller that allows for use in fresh or saltwater applications. Pumps include a variety of attachment fitting to choose from as well as a strainer and foam filter. For use indoors or outdoors.
Product description
17437, Sub Pump Assembly, Hennie Penny is committed to developing new concepts, value-added services and customized solutions for foodservice operators.
From the Manufacturer
17437, Sub Pump Assembly , Henny Penny is committed to developing new concepts, value-added services and customized solutions for foodservice operators
- Genuine Oem Replacement Part
- Hennie Penny Is Committed To Developing New Concepts, Value-Added Services And Customized Solutions For Foodservice Operators
- Use Genuine Oem Parts For Safety Reliability And Performance
- From The Brand Name: Henny Penny
Product description
Half Off Ponds Patriot PA-20 Subsurface Aeration Pump
The Patriot PA-20 Air Pump is the perfect choice to create and maintain a healthy pond environment.
This 17-watt highly efficient, low energy pump enhances oxygen levels and the turnover rate of the water in your water garden or fish pond.
The aerator puts out 1.4 cubic feet per minute of oxygen which keep your fish happy and healthy. During the hot summer months, the Patriot PA-20 Air Pump has an overload sensor that prevents the pump from burning out due to maintaining the needed oxygen levels to avoid oxygen-depleted water.
The Patriot PA-20 Air Pump is used to help break down fish waste allowing toxic gasses to harmlessly escape as well as helping prevent the pond surface from freezing over in the winter months by disrupting the water’s surface.
This is the perfect aerator to maintain and keep a healthy water feature. Turnover is very important; moving water from the bottom to the surface reduces thermal layering and helps bring debris into suspension so the filtration system can remove and treat it.
Aeration Tubing is NOT included.
- Excellent choice for small size ponds, qurantine tanks, and stock tanks up to 2,500 gallons. Whisper Quiet Operation: Reliable, Oil Free and Extremely Energy Efficient.
- includes: HOSE NOT INCLUDED. Discharge Outlet: 5/8"; Cord Length 6 Feet
- Output: 1.4 CFM. Pond Depth To 12'. Noise Rating (dB) 32. Volts 120. Watts 17.
- Frequency (Hz) 60. Dimensions (L x W x H) 9" x 7" x 7". (CFM = Cubic Feet Per Minute).
- Indoor / Outdoor Use. 2 Year Warranty. Ships Fast and Free Ground Delivery
User questions & answers
Question: | The title says 1.4 cfm and the second pic says 1.4 cfm but the description says 0.8 cfm, which is accurate |
Answer: | really? |
Product features
The Important of Subsurface Aeration
The aeration of ponds and lakes is a vital factor regarding the health of your feature. Dissolved oxygen is imperative for a healthy feature and to prevent pond and lake turnovers and fish kills. Secondly, all ponds or lakes deeper than 6-7 feet will have a thermocline - a separation of cooler water on the bottom level below the thermocline containing poor oxygen levels, high in methane, hydrogen sulfide and other toxic gases; and the top layer which is warmer and contains most of the oxygen. Bottom aeration breaks this thermocline up to mix the water together providing oxygen to all the water by breaking the thermocline and diffusing the toxic gases to the surface for evaporation through osmosis. Bottom aeration should be started slowly at an hour a day and steadily increasing an hour a day during daylight hours until the pond aerator is on 24 hours to prevent instant turnover and mixing of toxic gases. Pond or lake turnover happens naturally and will happen eventually in every pond - it is just a matter of time, not if, but when. Fish kills during a lake or pond turnover can happen overnight. Therefore, bottom aeration is so very important.
Large ponds and lakes naturally aerate through plant photosynthesis and atmospheric mixing like wind and rain. The problem is that most ponds and lakes do not absorb or receive enough oxygen compared to how much is being used and this harms the aquatic system. All life in the ponds or lakes needs oxygen to be healthy and prevent pond or lake turnover: the disruption of thermocline - the separation of upper levels of water and lower levels which then mixes toxic gases, nutrients like phosphorous and nitrogen, into the oxygen rich surface water, and suffocating the wildlife within 24 hours or so.
The bottom aeration can work up to 40 feet or so without adding to much pressure back on the motor - psi. Bottom aeration should be used in conjunction with beneficial bacteria except in the case of an ongoing fish kill. Beneficial bacteria can be added once the pond or lake has adequate oxygen supplied for several weeks. Aeration decreases the chances of lake turnover and promotes healthier fish Aeration makes a healthier pond and keeps a hole open in the ice for gases to escape in winter as well as allowing water fowl and other animals to drink depending on placement of diffuser.
Product description
Do you need fast pain relief for muscle aches and back pain? Sub Zero is the only leading topical pain relief gel with Uncaria Tomentosa (Cats Claw), Boswellia, and Ilex — a unique herbal blend proven to provide fast, long-lasting relief from minor aches and pains.
Manufacturer Contact Information
8003767263
- COOLING GEL PAIN RELIEF: Sub Zero Pain Relief Gel delivers effective & fast pain relief due to strenuous exercise, sore muscles, strains, spasms, stress & more. Pain relieving gel is colorless and a non-greasy formula for long-lasting pain relief
- FAST-ACTING: Sub Zero pain relievers contain menthol gel, cat's claw herb & a unique blend of other herbs to provide immediate & penetrative pain relief on the spot. Try the gel for back pain, arthritis pain relief, tennis elbow treatment, and more
- SORE MUSCLE RELIEF: Sore from lifting and need a muscle rub? Need arthritis pain relief from a strenuous hike? Need back pain relief from yard work? Keep SubZero close to provide advanced fast cooling pain relief where you need it, when you need it
- MULTI-SIZES: Cooling gel is a pain reliever available in a variety of sizes. Look for our pain cream gel in 5g travel packs, 3-oz. pain relief roll on pain relief, 16 oz tube, 1 gallon, and 4-oz. tube for convenient on the go use
- SUB ZERO QUALITY: Compare the active ingredients and pain relief of Sub Zero against other major numbing cream or gels and you will be pleased with less pain. Also works for fibromyalgia pain relief and for joint pain relief
User questions & answers
Question: | Can this gel be used with portable ultrasound |
Answer: | You can buy a small aquarium water pump, it works very well ! Much cheaper too... |
Question: | Is this correct.. ships in 1 to 2 months |
Answer: | I do not know what this thing is made of, but I can tell you that it has a very strong chemical smell. I noticed it as soon as I opened the box. I tried washing it in warm water and dish soap but it did not seem to make a difference. I think it may be made of some type of plastic or resin. It is made in China. It is very difficult to find the label that says it is made in China. I do not trust any products made for pets that are made in China. The fountain is very nice to look at but I sent mine back without ever using it because of the smell. I would never use something that smelled like a chemical to hold my dogs water for daily use. I did write a review on Amazon and after reading some of the negative reviews I found other people who had the same experience. I wanted a flowing fountain so I ended up buying the Hagen Dogit Design Fresh and Clear Dog Drinking Fountain, Value Bundle. I have been using it for about 1 month now and I am quiet happy with it. |
Question: | Hi!, May I ask where it is made? like what country? thank you |
Answer: | Is a pretty small opening. The water constantly bubbles though so he could probably get his paws wet by tapping on white part where the water comes out. It comes up through a small tube. Honestly, though, I'd stay away from this one. I had a hard time keeping it clean. This was the outside waterer and I had to really scrub it every week to get the slime and mold out. There are better ones out there. I have a blue and white one from doggit I use inside that's much easier to keep clean. The one advantage to the one pictured is its fairly heavy and hard to tip over. |
Question: | would like to see ingredient list with % of each |
Answer: | Ours leaked too, and we had to buy a new fountain. In addition, it damaged our baseboards and some of our laminate flooring in the adjacent room. We have had 4 of these over the years. The first one lasted 2 years. the second one lasted just over 3 years, and the third one lasted just under 3 years. We just got the 4th one 6 months ago. Typically the hoses have come detached from the top and would fall in, so the water wouldn't come out. The most recent one, the bottom cracked and leaked. Since the last one damaged my house, I bought a boot tray to catch water in case it leaks. The one I bought you can search here: Boot Mat And Tray For Heavy Duty Floor Protection-Pet Bowls-Paint-Dog Bowls, Multi-Purpose, Shoes, Pets, Garden - Mudroom, Entryway, Garage-Indoor And Outdoor Friendly (13.7''x10.6"x1.1" 2ps) |
Product features
Sub Zero Cool Pain Relieving Gel
Suffering from arthritis, neck and back pain, sore muscles, sprains and spasms? Sub Zero Cool Pain Relieving Gel is an effective pain relief system providing fast long lasting relief from aches and pains. Sub Zero contains no artificial coloring, 3.9% Menthol, and a unique herbal blend of llex, Boswellia and Uncaria Tomentosa otherwise known as Cat's Claw.
Product description
1-42 Dual Purpose Intake Submersible Pump, 6' Cord, Operates Submerged Or Inline, Has Both 1/2" MNPT & 1/4" FNPT Inlet, 1/4" MNPT Outlet Accepts 1/2" I.D. Tubing, Thermally Protected, 1/150 HP, 205 GPH at 1', 115V, UL Listed, 7.4' Maximum Lift. The product is manufactured in China. Easy installation and easy handling.
- Item Weight: 3.3 lb
- Country of Origin: China
- Brand name: Franklin
- Item Dimensions: 6.3"L x 4.3"W x 6.2"H
Product description
'Submersible Sewage Pumps, Pump HP 1/2, Voltage - Pumps 120VAC, Discharge NPT 2 In. F, Max. Head - Pumps 18 ft., Pump Body Material Cast Iron, Base Material Glass Filled Nylon, Impeller Material - Pumps Glass Filled Thermoplastic, Shaft Seal Material - Pumps Buna-N, Carbon, Ceramic, Cord Length - Pumps 10 ft., Switch Type - Pumps No Switch Included, Height 12-15/16 In., Diameter 10-1/2 In., GPM of Water @ 10 Ft. of Head 63, Thermal Protection Yes, Motor Type Single Phase, Bearing Type Ball'
- Price For: Each
Product description
Superior Pump builds pumps that are truly Built to Last and are 100 percent factory tested. Superior Pump uses quality components including solid copper motor windings, heavy duty stainless steel jacketed shaft seals, double o-ring seals on motor plate, and electronically controlled split capacitors. Superior Pump model 91250, 1/4 HP thermoplastic submersible utility pump with 10 foot power cord and ¾-inch garden hose adapter, will move water up to 1800 gallons per hour. Equipped with suction screen to filter out large debris and handles up to 1/8-inch solids with ease. Base of the pump is designed to fit the hub of a standard 6-inch floor drain. This pump is UL/CUL listed and CSA certified and backed by a 1 year warranty.
From the Manufacturer
Superior Pump is a family owned and operated Pump Company specializing in residential / light commercial duty pumps. Headquartered in Minneapolis, Minnesota, Superior Pump was founded in 1999 after spending years in the pump industry dating back to the 70's, and with a plumbing background starting in St Paul Minnesota dating all the way back to 1885. Superior Pump adheres to our strong core family values, selling the absolute highest quality product possible. Known for building durable pumps, Superior Pump concentrates on quality throughout the engineering, manufacturing and testing processes. Quality products, strong warranties, excellent USA based customer service - Superior Pumps Built to Last!
- 1/4 HP Utility pump moves up to 1,800 gallons per hour; pump will lift water up to 25' of vertical height
- Tough thermoplastic construction; 10' cord length
- 1-1/4 inch NPT discharge for high capacity pumping; includes 3/4 inch garden hose adapter
- Removable suction screen and handles up to 1/8 inch solids
- Superior Pumps are Built to Last, engineered with quality components and are 100% factory tested
User questions & answers
Question: | What's the PSI or max head (pumping vertical height) of this pump |
Answer: | A quick Google search of "Superior Pump 91250" yields the manufacturers specs. I do not see PSI listed but "Pumps will lift water up to 25' of vertical height" I belive answers your question...there is a chart on the "Performance" tab that shows 30 GPM at 0' lift and 2 GPM at 25' lift...with flow rates every 5' listed.http://superiorpump.com/products/utility/91250.html |
Question: | Does it have an automatic shut off |
Answer: | The pump does not have an automatic shut off. I added a float switch because I wanted it to pump out a sink that had a slow-running clogged drain where I had the washing machine. When the sink was mostly pumped out the float switch turned off the pump. It worked great for a couple years until I got around to dealing with snaking the drain which didn't have an easy clean-out. This is a good pump, since the sink drain got taken care of, we've been using the pump to pump koi pond water over a 5' fence to our neighbor's garden using about 150' of garden hose. The pump runs continuously for 5+ hours without issues in this process. |
Question: | Will clothes washer hoses fit on this pump |
Answer: | The pump itself fits a garden hose nicely. You can buy the attachment package listed next to it for the converter piece. It only came to around $8.00. It also comes with a larger hose. I didn't need it for my spa but if you need to empty a washer or bigger pool it seems like it would come in handy. Hope that helps. Good luck. :-) |
Question: | Can this be user to flush a tankless heater with vinigar |
Answer: | I bought the pump for this very reason. I'm not sure if it is rated to handle vinegar, but at the price I figured I'd try it and see. I have two tankless water heaters, and I wanted a pump that could clean out both at the same time and this pump certainly does the job. I have a hose that runs from the pump, into a splitter. From the splitter I have two hoses going to each water heater (one hose per water heater). Even pushing water through two hoses, it still has a strong flow, with each hose pushing about the same flow as the water hose faucet outside your house opened wide open (guestimate). The splitter I have allows me to adjust the flow rate by closing off some valves if it is too strong. For just one water heater, i would think this pump is too strong (as it REALLY moves water), but I'm not a plumber so I couldn't say for sure. If I were to do it again, I think I would have purchased the 1/4 HP pump, or even the 1/5HP for cleaning out water heaters with vinegar. I cleaned out my water heater this week for the first time using this pump. I let it run for 2 hrs, and I noticed that it got warm (about the temp of a warm-to-hot bath). I'm not sure if that is normal, but thought I'd let you know. |
Product features
Superior Pump 91250 1/4 HP Thermoplastic Utility Pump
Superior Pump builds pumps that are truly Built to Last. Superior Pump uses quality components including solid copper motor windings, heavy duty stainless steel jacketed shaft seals, double o-ring seals on motor plate, and electronically controlled split capacitors. Superior Pump model 91250, 1/4 HP thermoplastic submersible utility pump will move water up to 1800 gallons per hour. Equipped with suction screen to filter out large debris and handles up to 1/8 inch solids with ease. This pump is UL/CUL listed (E238091, by UL, 2019) and CSA certified (230584, by CSA, 2019)
Construction and Discharge
- Thermoplastic construction is corrosion resistant and offers years of performance and reliability.
- 1-1/4 in. NPT discharge.
- 3/4 in. Garden hose adapter.
Multiple discharge hookup options
- Easily hook up to a Garden Hose* or Discharge hose* (*not included)
- Easy to transport using the carrying handle.
- 10 ft. power cord.
Intake Screen
- Intake screen filters out debris from entering the impeller. This helps reduce the clogging and prolongs the life of the pump.
- Easily to clean and is removable.
Motor and Performance
Motor:
- 1/4 HP Superior Pump continuous duty, thermally protected - split capacitor motor
Performance
- 1800 Gallons per hour at 0'
- 1200 Gallons per hour at 10'
- 540 Gallons per hour at 20'
- 【Specifications】Dimensions: 4.1*2.6*3.5inch. The 5ft long power cord offers convenient installation. An Adjustable Knob to control the water flow rate, so you can get just the amount of water pressure you want. Max Flow Rate: 800 GPH (3000L/H), Max Lift height: up to 10 Feet. Watt: 24W; Voltage:110-120V.
- 【Detachable & Cleanable】This profile size water pump is easy to hide or disguise.The device doesn't need any tools to disassemble it and is very easy to be cleaned.
- 【Optional Outlet Positions】Place the pump flat on its base, and you can get many positions. Manually rotate into the desired position.
- 【Wide Application】: High Performance Energy-efficient Pumps designed for use in Ponds, Fountains, Waterfalls, Hydroponic systems, Irrigation systems and water features.
- 【Warranty】: Super durable & reusable; Comes with 1-Year warranty; Any problems with the item you received, please contact us without hesitation.
User questions & answers
Question: | Can this be used to pump manure tea to garden plants? The tea is made from manure in fine mesh bags which is then placed in fresh water |
Answer: | Yes |
Question: | What size tubing should you buy to fit the .74 inch adapter |
Answer: | Can i use 3/4 or 5/8 pvc ? Is there any adapter come with the pump to use pvc? |
Question: | Where exactly is the inlet? If used as a small sump pump, how much water will be left |
Answer: | The inlet is in the middle of the pump, in the front. So, whether you stand it up like it is in the picture or lay it down on its side, you would have at least 1", maybe 2" of water left. Hope this helps. |
Question: | Does it have / need oil or lubricant? Would keg lube work |
Answer: | no need to lube. just plug and run it in water. |
Product features
VIVOSUN 800GPH Water Pump
- This pump can be used in either wet or dry installations and features wet rotor/wet bearing technology for cooler running. Pre-filter screen handles large particles require less maintenance. Designed for fresh water use only.
- Compact design is great for space-saving on your aquariums and fish tanks. Multiple size insert fitting and suction cups included.
3 oulet adapters
Equipped with three nozzles, first one is 0.51inch diameters, second one is 0.62inch, the third one is 0.74inch, providing different water flow effects depending on your needs.
Water control valve
Designed with a adjusting knob, allowing to adjust the water flow rate, the maximal flow rate can be up to 800GPH (3000L/H).
4 suction cups
The 4 suction cups are strong and require no extra tools to secure. You can choose vertical or horizontal fixing according to your needs.
Parameter details
Power: 24W; Voltage: 110-120V
Flow: 3000L/H; Power cord length: 5ft
Working environment temperature: 1-36 °C
Product description
Little Giant PE-2YSA 1/40 HP Submersible Parts Washer Pump with 6' Plug-Less Power Cord (518550)For submerged use in parts washers using aqueous solutions or UL-listed solvents. Little Giant PE-2YSA 1/40 HP Submersible Parts Washer Pump with 6' Plug-Less Power Cord (518550) Features: Completely submersible Rated for continuous duty 1/4" MNPT discharge Thermal overload protection 1/2" MNPT Master Builders conduit fitting 6´ power cord without plug Nylon pump head Double lip Viton shaft seal Stainless steel motor shaftLittle Giant PE-2YSA 1/40 HP Submersible Parts Washer Pump with 6' Plug-Less Power Cord (518550) Specifications: Horsepower: 1/40 Flow: 300GPH @ 1' Cord Length: 6' Shut Off: 12. 2' Voltage: 115 Hertz: 60 Amps: . 8 Watts: 47 Weight: 4. 5 lbs. Height: 5. 55" Width: 2. 9" Length: 5. 4"
From the Manufacturer
Little Giant pump for submerged use in parts washers using aqueous solutions or UL-listed solvents. Includes 6-Feet cord.
- 1/40 horsepower
- 300 GPH @ 1 Feet rise to 12. 2 Feet max
- 115 VAC, 60 Hz single phase
- 1/4-Inch MNPT discharge and 1/2-Inch MNPT Master Builders conduit fitting
- Completely submersible
User questions & answers
Question: | what options are there for mounting this unit? bolt/screw holes in the bottom or back? zip tip to something? included mounting bracket? thanks |
Answer: | It’s not really strong smelling, but it’s flammable.It should only be used in a parts washer designed for a a flammable solvent. |
Question: | how cold of solutions can the pump operate at |
Answer: | It shouldn’t be used in a cheep parts washer that requires a water based solvent as it is very flammable. |
Question: | Can this be used in a parts washer using diesel for the cleaner |
Answer: | we are using st right no dilution and it took 15 gallons to fill our tank |
Question: | I purchaed parts washer from TSC and put Superior Products "Brake Parts Cleaner" the pump practically melted. Does anyone if this pump will hold up |
Answer: | HI, This is a liquid. Thanks |
Product description
Product Details
Green expert submersible utility pump is adapted to connect with 3/4" standard garden hose, can completely submersed in 16.4 feet depth Flooded Basement or Puddle of Accumulated Water for water drainage.
It can lift water to 19.7 feet height with dependable efficiency. The lengthened 25-feet power cable allows you to connect to the power conveniently.
This item is designed for common 115V, 60Hz.
Application Occasions
Ideal for draining clean or slightly dirty water from any enclosing environment, such as cellars, reservoirs, pool covers, flooded basements, flat roofs and more, but not for applications involving salt water or brine.
Specification
Output power: 1/4 HP
Max height: 16 feet
Max Flow: 1057 GPH
Max. submersible depth: 16 feet
Length of cable: 25 feet
Package includes
1 x Submersible sump pump
1 x detailed manual
- 【POWERFUL SUMP PUMP】1/3HP, portable and energy saving, including NPT1" and GHT 3/4" male thread for discharge hose connection. Small electric submersible pump.
- 【Seal Structure with Thermal Protection】- Upgraded Sealing Structure, Thermal Protection, and Copper motor wire give pump much longer duration and ensure effective pumping.
- 【GREAT FOR DRAINING】- Great to move water for garden irrigation or cleaning your yard or road.GREAT for flooded area, swimming pools, cellars or garden pond.
- [HIGH-QUALITY MATERIALS]:Thermoplastic composite material is highly rugged. Designed and manufactured in line with the valid safety requirements. Thermoplastic body resists corrosion as there are not exposed metal parts. Lower noise and energy-efficient. Oil free motor requires no maintenance.
- 【Float Switch Automatically Control】- With its long 25ft cable cord, it can be installed for automatic operation or used in temporary situations.Cut off immediately when pump fails to pump water to prevent the coil from getting burned.
User questions & answers
Question: | I'm wanting to use this with a garden hose, do I need to allow the water to flow , without interruption |
Answer: | That's a good question, I would go off the tag on the side of the pump if can be seen. There is a bog difference between 0.8 and 1.4. I do not have a pump here to look at, sorry Allen in Buffalo. |
Question: | What is the hottest temp water is this pump rated for |
Answer: | Dear customer, the electric cord length is 25ft, it can fit these hose pipes: 1",G1",1-1/4",G1-1/2"(From Up to Down). |
Question: | Will this work to pump out water from a 20ft. above ground pool |
Answer: | Not sure but it removes about a foot per hour in my standard built in pool |
Question: | Can I use this to drain water off my pool cover all winter |
Answer: | The diameter of pipe can be 1", G1", 1-1/4", G1-1/2" (From Up to Down). You can select one size based on your preference. |
Question: | What level does the water have to be before the switch activates the pump |
Answer: | I can't figure out how to copy pictures into this section. And the instructions aren't that good - the english used has incorrect grammar so take that into consideration as well. So I'll type what I think you may need to know. Before using the pump again, first "soak" it so that any possible dirt residues do not block the appliance. Submerge pump at an angle into the liquid so that no air pocket forms on the underside of the appliance. Suction would be prevented by this. Once the pump is submerged, it can be righted again. It also says that we should be using a rope to lower it into the water and not using the main cable..... Minor faults are often sufficient to cause a malfunction.... Pump does not run ----check cables, plug, socket and fuse. Motor defective? contact service partner. Automatic power-off low water level float - manual vertical float motor normal power, start the pump without water, will damage the water pump, manual vertical float when use must be care (I typed this as manual listed it, bad/incorrect grammar, makes no sense) Cleaning the suction area - clean all accessible insides of the casing. Remove fibers which have wound around the rotor shaft by opening the pressure connection. Remove stubborn contamination with a brush and detergent. It also says to if you unable to correct a fault yourself, please contact our technical support directly. BUT there is no number listed anywhere in the 8 page manual. Sorry! This is all the manual says. Not a good manual... |
Question: | The electrical cord is not pictured. Is it one piece and where does it attach to housing |
Answer: | I have always put the white foam ones behind them. I order replacements for those also and switch them out every other filter but clean them when I clean the fountain. |
Question: | where can I find the hose this thing needs? I can't use it as it's not a standard hose |
Answer: | Yes you need both. They go two different places. If you get the smaller dogit fountain then you only need foam filters. |
Question: | Is this unit for use in salt water |
Answer: | You don't need the Replacement Filter if you're not using tap water. (Plus it's not a great filter when comparing to Brita, Pur, or the best Zero Water filter) We use our already filtered water (Aquasana sink filter) or bottled water (Smart Water, Fiji, Icelandic) so we only use the foam. Plus, which "foam" are you talking about? This is the one I use currently. http://www.amazon.com/Dogit-Design-Replacement-Cartridge-Fountain/dp/B0052TRIR2/ref=pd_sim_199_3?ie=UTF8&refRID=0XBT06ES8A5SC2HN8EAM The foam is necessary and useful to filter out debris, hair, dust, etc. The foam also has carbon to help filter the water and should be replaced after 3 weeks. |
Question: | What's the required minimum level of water |
Answer: | We replace ours about every two weeks or so. We have a Newfoundland and she is a messy girl. Lots of slobber. |
Product features
Product description:
- Power: 250W
- Type: Water Pump
- Qmax: 1060gallon/H
- H.Max: 16ft
- Power Cord Length:16 feet
- Voltage: 110-120V 60Hz
Latest Reviews
View all
Tea Maker For Tea Bags
- Updated: 03.07.2023
- Read reviews

Light Therapy Lamp For Sleep
- Updated: 24.02.2023
- Read reviews

Ion Dvd Player Software
- Updated: 01.03.2023
- Read reviews

Onkyo Floor Standing Speakers
- Updated: 11.01.2023
- Read reviews

Remington Beard Trimmers
- Updated: 02.06.2023
- Read reviews