13 best flotec shallow well pumps
Flotec is a well-known brand that manufactures a variety of water pumps and pump accessories, including shallow well pumps. Shallow well pumps are designed for use in applications where the water source is relatively shallow, typically at a depth of 25 feet or less. These pumps are commonly used for residential water supply, irrigation, and other similar purposes.
Here are some key features and information about Flotec shallow well pumps:
Shallow Well Capability: Flotec shallow well pumps are specifically designed to draw water from shallow wells or other water sources that are not too deep. They are often used in situations where a deep well pump is not required.
Jet Pump Design: Flotec shallow well pumps are typically jet pumps, which means they use a jet of water to create suction and draw water from the well.These pumps are known for their reliability and efficiency in delivering water from shallow sources.
Horsepower Options: Flotec offers a range of shallow well pumps with different horsepower ratings to suit various water supply needs. The choice of horsepower depends on factors such as the well depth, water demand, and distance the water needs to be pumped.
Durable Construction: Flotec pumps are generally built with durability in mind. They often feature corrosion-resistant materials and components to ensure a long lifespan, even in harsh water conditions.
Pressure Control: Many Flotec shallow well pumps come equipped with pressure control switches that automatically turn the pump on and off to maintain a consistent water pressure in your plumbing system.
Easy Installation: Flotec provides user-friendly installation instructions, and their pumps are designed to be relatively easy to install for individuals with basic plumbing skills.
Availability of Replacement Parts: Flotec offers a range of pump accessories and replacement parts, making it convenient for users to maintain and repair their pumps when needed.
Warranty: Flotec typically offers warranties on their pumps, which can vary depending on the specific model. Be sure to check the warranty information for the particular pump you're interested in.
When selecting a Flotec shallow well pump, it's important to consider your specific water supply requirements, the depth of your well, and any additional accessories or features you may need for your application. Proper maintenance and occasional servicing will help ensure the longevity and reliable performance of your Flotec pump.
Below you can find our editor's choice of the best flotec shallow well pumps on the market
Flotec Thermoplastic Shallow Well Jet Pump - 1 1/4in. Suction Port, 1in. Discharge Port, 720 GPH, 3/4 HP, Model# FP4022
Flotec
Product description
This Flotec Thermoplastic Shallow Well Jet Pump provides good pressure pumping, perfect for shallow wells less than 25-ft. deep. Thermoplastic construction gives high corrosion resistance. Comes with prewired 30/50 pressure switch. Amps 12.2/6.1, Flow GPH 720, HP 3/4, Max. PSI 78, Max. Suction Lift ft. 25, Max. Total Head ft. 181, Discharge Port in. 1, Self-Priming Yes, after initial prime, Suction Port in. 1 1/4, Thermal Overload Protection Yes, Volts 230/115, Pump Housing Thermoplastic, Dimensions L x W x H in. 22 13/16 x 11 1/16 x 10 1/2. Perfect for shallow wells less than 25-ft. deep Thermoplastic construction gives high corrosion resistance Comes with prewired 30/50 pressure switch Heavy-duty dual-voltage motor Self-priming after pump housing is initially filled
- Capacities up to 12 Gallons/Minute at 40 PSI (Average Household use 6-10 GPM) Fiberglass-Reinforced Thermoplastic Pump Housing for Highest Corrosion Resistance Pressure Switch Preset to 30-50 PSI Pressure Setting Ready to Install, Heavy-Duty 230 Volt Motor (See Manual for 115 Volt Conversion) Self-Priming after Pump Housing is Initially Filled (Check or Foot Valve Required) Serviceable Unit Superior Performance at 25' Depth to Water or Less TC2104 Pressure Gauge Recommended
User questions & answers
| Question: | Do either of the 2 plugs on the front of the pump (below the inlet) have suction or are they both for pressure relief |
| Answer: | Self priming pumps contain a fragile "tank" on the front of the volute that simply holds water to ensure it primes properly. It is NOT meant to be pressurized so never plumb these pumps in where you might shut off either the intake or output without pressure relief to the expansion chamber.. Those two plugs on the front of the pump (FP4012 depicted model, not the FP4022 as listed) I believe, are utilized to drain it for "winterization" to ensure that there is no water that might freeze, expand and break the volute priming chamber. I suggest those two plugs can be drains or perhaps for a very low pressure line that can be used to prime the pump, I don't know of other applications. I like the Flotec FP4022 as with proper installation they can last twenty years of shallow well service. They're very efficient and durable, much better than many comparable brands. I have two of these, one of them fifteen years old. However proper installation is very important. Feel free to forward questions about the installations, I have over 30 years of experience with well water pumps at my residence. |
| Question: | i need to install this pump on a deep well , about 32ft, what accessories I have to buy and where to buy. Thanks |
| Answer: | Hello,To not be misinformed please contact the manufacturer.Flotec Pumps Customer Service: (800)365-6832Thank You,Lindsay |
| Question: | would this be a suitable pump for a small pond |
| Answer: | Alison, if installed properly, this is suitable, no optimal, to pump from a small pond. In that case you must plumb in a screening system on the pump intake and closer to the pump intake a check valve. This is a wonderfully durable, efficient pump. If you need high pressure for domestic water use it's an appropriate unit. If you seek to only pump water for irrigation or washing, a "dirty water" submersible pump is much easier to install but the pressure is much lower, not sufficient for residential use. This submersible pump is simply lowered into the pond attached to a hose that feeds irrigation system or washing hose. |
| Question: | I have a 5000 water holding tank, my pressure loss is from the holding tank to that house, will this system work to bring pressure to the house |
| Answer: | Yes, it can be installed to "boost" the pressure from a couple of pounds per square inch to around 25 pounds per square inch. However, it's important that it is installed properly. The intake of the pump MUST have an appropriate check valve between the pump and holding tank that only allows flow in one direction. Also you MUST have a small pressurized tank (5 to 20 gallon) with an internal air filled bladder plumbed to the output of the pump to allow some storage on the output so the pump is not turning off and on with every small water consumption. So it's not just pump require, the check valve costs around $25 and the bladder tank around $100 additional. However, I have had impressive luck with these Flotec pumps, they are a great value. Once installed properly they can last well over 15 years of heavy use. |
Shallow Well Jet Pump (ace5s)
Product description
Sold as each. 1/2 HP. For wells to 25'. 1-1/4" suction, 1" Discharge. GE motor 115/230 volt switch preset at 115 volts. 10 GPM at 30 PSI. 10.6 amp at 115VAC. Cast iron case. Built-in overloads. Plastic impeller. Carbon/ceramic, type 6 mechanical seal. One year warranty. Boxed . Manufacturer number: ACE5S. SKU #: 45436. Country of origin: (TBA). Distributed by Simer/Flotec.
- 1/2 HP
- For wells to 25'
- 1-1/4" suction, 1" Discharge
- GE motor 115/230 volt switch preset at 115 volts
- 10 GPM at 30 PSI
Flotec Cast Iron Shallow Well Jet Pump 1/2 Hp Boxed 1-1/4 "
Flotec
Product description
FP4112 1/2HP SHALWELL JET PUMP
- Built-in shallow well jet has corrosion-resistant nozzle, venturi and check valve.
- Close-grained cast iron pump body and base. Built-in check valve to prevent accidental loss of prime
- Dual voltage 115/230V; factory set at 230V.
- 1-1/4" NPT suction and 3/4" NPT discharge.
- Pressure switch setting 30-50. U.L. Listed.
Pentair Water-Flotec-Simer 2802 3/4 HP Cast Iron Shallow Well Jet Pump
Pentair
Product description
Pentair 3/4 HP Cast Iron Shallow Well Jet Pump
- Cast iron shallow well jet pump draws water from max of 25' for home water, sprinkling, etc
- 3/4 HP, 7.8 GPM max capacity, 7.3 GPM @ 10' lift and 40 PSI, max lift @ 25'
- Sturdy cast iron construction
- High performance
- 1-year limited warranty
Pentair Water-Flotec-Simer FP4155 1/2 HP Cast Iron Shallow Well Jet Pump
Product description
Pentair 1/2 HP Cast Iron Shallow Well Jet Pump. Tough & rugged 1/2 HP cast iron shallow well jet pump is perfect for smaller homes or cabins where the well's depth-to-water is 25' of less. Pre-Wired Pressure Switch. Discharge Size - 1" NPT. Voltage - 230v / 115v AC, 60 Hz
- Heavy-Duty Cast Iron Construction
- Superior Performance at Depths-to-Water of 25' of Less
- Dual Voltage Motor Can Run on 115v or 230v
- Max Lift - 25'; Max Shut Off Pressure - 65 PSI; Pressure Switch Setting - 30/50
- 1-year limited warranty
Flotec TC2502LF Well Pump Brass Check Valve
Flotec
Product description
Flotec TC2502LF Well Pump Brass Check Valve
From the Manufacturer
Flotec brass check valve
- Brass check valve
- Low lead
- Prevents water from back flowing
- 1-Inch
- Carded
User questions & answers
| Question: | can this be used horizontal |
| Answer: | Rucs65in works with natural gas. Rucs65in works with propane. |
| Question: | Does it leak, at all? My pump loses its prime, I need the valve to retain about 2' of water in the inlet line for a week between pump cycles |
| Answer: | Yes. Outdoor unit vents directly outside the unit and needs to be in full open air. Indoor unit has a connection for the exhaust pipe. They make a nice short one for going directly through a garage wall to the outside. |
| Question: | Is this sweat or threaded |
| Answer: | If you look on the Rinnai website they list their standard warranty. I think its 5 years on unit 10 years on burner but I am not 100% sure. I have a new RUCS75IN natural gas unit in box for sale [email protected] |
| Question: | What size is this |
| Answer: | No, your choice is to run two shed 40 runs all the way out of building (2 holes) or choose to run two in one concentric pipe from water heater out for the hole in wall. |
Flotec FP4012-10 1/2 HP Shallow Well Pump Jet
Flotec
Product description
Flotec Jet Pump, Shallow Well, 8 gpm, 1-1/4 in NPT Inlet, 1 in NPT Outlet, 25 ft Head, 1/2 hp Power, 230/115 V, 60 Hz, 9.4 A, 77 psi Case Pressure, 140 deg F, Thermoplastic, Standards: CSAus Certified, For 0 - 25 ft Deep Wells. Shallow well jet pump with built-in pressure switch. Superior performance at depths to water of 25' or less. 1/2 HP pumps up to 8 GPM. 3/4 HP pumps up to 12 GPM. 1 HP pumps up to 18 GPM. Fiberglass-reinforced thermoplastic pump housing for the highest corrosion-resistance. Heavy-duty dual-voltage motor - 1/2 HP preset at 115V; 3/4 HP and 1 HP preset at 230V. Self-priming after pump housing is initially filled. CSA certified.
This 1/2 HP, built-in shallow well pump jet from Flotec is ideal for wells with pumping levels of 25 feet or less. Featuring a corrosion-resistant nozzle and venturi, this model offers superior performance at capacities to 10 GPM at 40 PSI. It works by self-priming after the pump housing is initially filled with water. The fiberglass-reinforced thermoplastic construction provides incredible corrosion resistance, as well as resistance to sandy water. The dust-proof cover protects all electrical components from dust and insects, thus resulting in a longer-lasting motor. With a stainless steel shaft, heavy duty ball bearings, balanced rotor, mechanical shaft seal and insulated motor windings, the pump's powerful motor delivers non-stop operation for years to come.
From the Manufacturer
Built-in shallow well pump jet ideal for wells with pumping levels of 25-Feet or less. Offers superior performance at capacities to 10 GPM at 40 PSI. Fiberglass-reinforced thermoplastic provides incredible corrosion and sandy water resistance; dust-proof cover protects all electrical components from dust and insects. Includes stainless steel shaft, heavy duty ball bearings, balanced rotor, mechanical shaft seal and insulated motor windings. Measures 6.0-by-7.0-by-11-Inch (Width by Height by Depth); weighs 26 Pound
- Built-in shallow well pump jet ideal for wells with pumping levels of 25-Feet or less
- Offers superior performance at capacities to 10 GPM at 40 PSI
- Fiberglass-reinforced thermoplastic provides incredible corrosion and sandy water resistance; dust-proof cover protects all electrical components from dust and insects
User questions & answers
| Question: | Can I plum this straight off my city water service without fear of starving it |
| Answer: | Standard pipe thread. Regular steal pipe, however it's important to use drive couplers to connect the pipes. Drive couplers have an extra support so the pipe isn't as likely to break off at the threads. |
| Question: | Does it come with the pressure gauge? The 120V power cord |
| Answer: | Dont waste your time trying to drive it. Make a water jet drill pipe with 2 1/2" pvc. Water jet the pvc down 20' in 1 hr and drop the 1 1/4" point down the inside of the 2 1/2" pvc. Then pull the 2 1/2" pvc up a few feet to expose the well point to the water. Easy. |
| Question: | My well is 30 ft deep, will this pump pull from that? And if so will it be enough to water my garden |
| Answer: | I think you'll want be at least an inch within plumb in 7 feet, if you are more out than that I would pull out and retstart. |
| Question: | Can we get a refund |
| Answer: | 2 1/4" You need a 2 1/2" casing. It will not fit inside a 2" pipe |
Flotec FP5172 Pump Sprinkler 1.5Hp
Flotec
Product description
Fiberglass reinforced thermoplastic pump housing for the highest corrosion resistance. Superior performance at depths to water of 20' or less. Ready to install 230 volt, heavy-duty motor. Self-priming after pump housing is initially filled, protects against overheating. 1-1/2 HP pumps up to 67 gallons per minute. 2 HP pumps up to 69 gallons per minute. CSA certified. Recommended Beaker 15 amp for 230v / 25 amp for 115v
This Flotec model is a self-priming, corrosion-resistant, high-capacity sprinkler pump that's constructed of rugged, heavy-duty fiberglass-reinforced thermoplastic. Capable of operating up to 30 sprinkler heads and designed for continuous operation, this pump delivers 115/230 motor voltage and offers dual voltage capability. Ideal for lawn sprinkling, the self-priming design of this efficient model permits use on automatic sprinkler systems as well as on de-watering and water transfer.
For added convenience, this 1.5 HP pump has an easily accessible design that makes it a snap to reach parts that need service due to normal wear and tear. It also comes with a 1-year warranty.
- Self-priming, corrosion-resistant, high-capacity sprinkler pump
- Capable of operating up to 30 sprinkler heads; delivers 115/230 motor voltage and offers dual voltage capability
- Self-priming design permits use on automatic sprinkler systems as well as de-watering and water transfer. Maximum pressure : 47 psi
- Measures 6.0-by-8.0-by-9.0 inches (WxHxD); weighs 41.5 pounds; 1-year warranty
- Self-priming, corrosion-resistant, high-capacity sprinkler pump
- Capable of operating up to 30 sprinkler heads; delivers 115/230 motor voltage and offers dual voltage capability
- Constructed of rugged, heavy-duty fiberglass-reinforced thermoplastic
User questions & answers
| Question: | Is this to powerful for 2-3 sprinklers |
| Answer: | I have a bout 15 sprinklers on this pump and it goes a fantastic job so you don’t have to worry about two or three I have five zones and there’s about 15 on each Sone |
| Question: | The pump is advertized as 1 1/2 hp. under technical details it says 1 hp. which is correct |
| Answer: | The one that I received was a 1 1/2 |
| Question: | what kind pump i need to move water uphill from 25 or 30 feet |
| Answer: | I use my pump to irrigate my lawn in Florida so there is not too much of a rise but I would imagine it would pump at least 30 feet uphill. |
| Question: | What is the max amps this pump pulls at startup |
| Answer: | 1.5 hp = 1118.55 watts so if running at 240 volts = 4.66 amps. In rush current (start up) can be 4 to 5 times more than running amps. If running on 120 volts = 9.3 amps same in rush of 4 to 5 times. 4 times would be over 37 amps. I am running this pump on 240 and a double pole 50 amp breaker. The wire run is 300 foot long. I am using 6 gauge wire. everything is well. I think a 30 amp double pole would do the trick since 5 times the inrush @ 240 volts is 23.3 amps. This will allow a smaller wire too 30 amps require 10 gauge. As always check your local codes. Use this info as a guide only. not responsible for any wrong info. |
Flotec Cast Iron Jet/Tank System 1/2 HP, FP410515H
Flotec
Product description
Corrosion-resistant shallow well jet/tank system is ideal for compact installations where space is at a premium. Pump comes already mounted on tank. Superior performance at depths to water of 25' or less. Pump tank system pre-assembled and ready to install. Ready to install 115 volt 1/2 HP motor. Pre-charged 15 gallon equivalent diaphragm tank. Maximum pressure of 63 PSI., Lot of 1
- MX
User questions & answers
| Question: | Is this unit self priming |
| Answer: | No, it is very easy to prime when setting up. |
Parts2O TC2104 Well Pump Pressure Gauge
Flotec
Product description
Parts2O TC2104 Well Pump Pressure Gauge
From the Manufacturer
Pressure Gauge to monitor the pumps performance
- Measures from 0 to 100 psi
- Use with submersible or jet pumps
- Monitors the pumps performance
- Also monitors water pressure
- 1/4-inch NPT connection size
- Brass fitting, Plastic housing and plastic lens
User questions & answers
| Question: | What size female fitting does this fit into |
| Answer: | 1/4 1/4{ female ' fenale |
| Question: | can this be used to replace a gauge on a nitrogen regulator |
| Answer: | This a water regulator gage. I believe water or liquid gages are different to gas gages. |
| Question: | Most pressure gauges come with a 1/4" npt fitting. this shows that there is an adapter on the bottom (presumably 1/2" which is what i prefer). yes |
| Answer: | Glad you asked, yes with such an adapter you have the choice of either size. |
| Question: | What size is the gauge face |
| Answer: | The face is 2". |
Flotec FP0F360AC Cyclone Water Removal Utility Pump
Flotec
Product description
Equally suited for everyday or emergency use, the Pentair Flotec FP0F360AC CYCLONE Water Removal Utility Pump is perfect for removing unwanted water in or around your home. The pump's maximum output is 350 gallons per hour (GPH) with a maximum lift of 43 feet. Corrosion-resistant, compact, and portable, this pump is designed for emergency dewatering, draining aquariums, waterbeds, clogged sinks, and more. The pump self-primes at 8 feet to 10 feet vertically. This pump includes a 6-foot 3-prong power cord and 90-day warranty.
From the Manufacturer
The CYCLONETM pumping system is designed for every day or emergency use. Perfect for transferring or removing unwanted water from waterbeds, aquariums, or non-draining sinks.
- Maximum pumping capacity up to 350 gallons per hour
- For emergency basement pumping, empty water beds, and pump out furnace pits and window wells
- Kit includes 1/12 Hp, 115 volt AC, 60 Hz, 1.5A motor, 6' power cord with automatic thermal overload protection, 6' garden hose, and puddle gulper
- Package dimensions: 10.9" L x 6.5" W x 6.4" H
User questions & answers
| Question: | How to tell witch way the water flows |
| Answer: | It’s marked on the pump. The base is where water flows in and it flows out through the hose. |
| Question: | Why is there two hose connectors, is one for draining an aquarium and the other fow water circulation |
| Answer: | one connection is for water aspiration (in) the second is for draining outside the water (out) for aquariun use the smaller pumpt name is little giant pump available for all size of aquarium smaller an little noise very good |
| Question: | Can this pump be used for continuous duty like 1 or 2 hours |
| Answer: | I use mine to pump out rain water from my in ground pool when it begins to overflow the top of the safety cover in winter. I usually run it for 18 to 24 hours at a time to drop my pool level down to an appropriate level. I usually have to to this about 4 or 5 times each winter. I am on year 4 and no issues. Just protect it from sun and rain. Update: As Muphy's Law would dictate, my pump died 2 weeks after answering this question. But I got 4 years out of it and I'm buying another. It held up pretty well for the amount of work it did. |
| Question: | How much lift does this pump have (how many feet up a vertical pipe can it pump |
| Answer: | At most 20 ft. You are better off placing the pump 10 ft above the source and then running another section of hose/pipe to get the remaining height/elevation you are trying to reach |
Flotec FP0S1300X-03 Tempest Fpos1300X Multi-Purpose Water Removal Utility Pump, 1470 Gph, 1/6 Hp, 115 Vac, 60 Hz, 8 Ft
Flotec
Product description
Flotec, Tempest water removal utility pump, multi-purpose, 1470 gph, 1/6 hp power, 115 vac, 60 hz, 1 in FNPT outlet, 20 ft head, 20 ft suction lift, 8 ft cord length, 77 deg F, thermoplastic, includes: power cord, garden hose Adapter and detailed owner’s manual, standards: CSA certified, UL listed, 930 gph at 10 ft lift, for emergency basement and sump draining, emptying ponds, appliances, wash down, roof dewatering, window wells, basements and rooftops. Submersible utility pump for removing unwanted water down to 3/16" depth. Thermoplastic construction for the highest corrosion-resistance. High-output performance, pumps up to 1470 gph. Removable inlet screen for easy cleaning. Includes 8' power cord and garden hose Adapter. Csa certified.
From the Manufacturer
The Tempest is a multi-purpose pump for a variety of household dewatering tasks including sump draining, emptying ponds and aquariums.
- Durable thermoplastic construction stands up to corrosion from dirty water disposal
- Pumps 1, 470 gallons per hour
- Powered by Oil cooled 1/6 HP motor
- The motor is 115 volt, 60 he, single phase 50 amp with automatic thermal overload protection
User questions & answers
| Question: | How much heat does this generate? I'm considering using it to drain my vinyl swimming pool; but I don't want it to melt the lining |
| Answer: | Yes it does. There is a separate pressure relief valve (PRV) assembly with a M33 fitting and relief valve (150 PSI) with 3/4" NPT threaded female fitting on the other end. Ref: Rinnai Tankless Water Heater Installation and Operation Manual |
| Question: | Will a 5/8" 3/4" hose screw on it |
| Answer: | Yes, The valves are included, cold and hot side. |
| Question: | Does the automatic thermal overload protection turn this unit off when there is no water present? If it turns off will it then turn back on automatic |
| Answer: | Non Condensing. You need to connect drain pipe. |
| Question: | Will this work for a rain barrel garden wattering |
| Answer: | Yes. Go to Rinnai’s website. |
Flotec FP7110T Vertical Pre-Charged Pressure Tank, 19 Gal, 1 In Npt, 100 Psi, Port
Product description
Pre-pressurized type, in-line FP7110T heavy gauge steel construction appliance-like finish factory tested 1 inch connections for domestic cold water UL classified to anise/nsf standard 61.This is manufactured in United States.
From the Manufacturer
Includes: Tank, Max. PSI: 50, Material: Steel, Max. Capacity (gal.): 42
- FLOTEC diaphragm well tank 20 gallons
- Pre-pressurized Type, in-line FP7110T heavy gauge steel construction appliance-like finish factory tested 1 inch connections for domestic cold water UL classified to ANSI/NSF standard 61
- This is manufactured in United States
- 19 total capacity gallons
- 16-inch tank diameter
- 28-inch tank height
- 1-inch tank discharge tapping
- Equivalent to 42-gallon tank
User questions & answers
| Question: | Where is the water fitting located |
| Answer: | I vented mine out through the side of the house from the basement. The unit has a PVC pipe running at a slight upward angle until the end of the pipe outside of the house. That was the easiest for me though. |
| Question: | Will this boost my water pressure and volume |
| Answer: | I have not had any issues with it and I have hard water. There is a flush kit that allows you to drain sediment. I highly recommend adding this as well. My unit came with the appropriate valves to to this. |
| Question: | Ok so does this come with a welded on pump mounting bracket or not? The customers who say yes are dated 2014. The more recent purchaser says no |
| Answer: | Not sure, check their website |
| Question: | Does the tank you have in stock model FP7110T includes the pump mounting bracket on top |
| Answer: | The Wattage is negligible In only uses electricity to ignite the gas and run the system board. Probably as much as an alarm clock |
Latest Reviews
View all
Adesso Lighting 4 Leds
- Updated: 09.02.2023
- Read reviews
Hits
- Updated: 04.02.2023
- Read reviews
Luxury Pillow Kings
- Updated: 20.01.2023
- Read reviews
Broan Nutone Exhaust Fans
- Updated: 10.02.2023
- Read reviews
Hidden Safes
- Updated: 31.03.2023
- Read reviews