9 best trash pump

Product description

The Champion Power Equipment 66520 2-inch Semi-Trash Gas-Powered Water Transfer Pump with Hose and Wheel Kit comes with everything you need to start pumping (just add oil and gas). Capable of passing solid waste up to 9/16 of an inch in diameter, this transfer pump is the perfect solution for moving water quickly and efficiently. Whether you are draining or refilling your swimming pool, removing water from your basement or draining shallow flooded areas, this unit features a self-priming design that holds prime even when it’s not running (requires initial priming to operate). This lightweight and portable transfer pump has a maximum delivery volume of 158 gallons per minute and is capable of passing solid waste up to 9/16 inch in diameter. With a 2-inch NPT inlet and NPT 2-inch outlet, this unit has a total head of 98 feet and a suction head of 26 feet. The complete hose kit provides everything you need to get your pump into action, including a 12-foot intake hose, a 20-foot discharge hose, cam action quick coupler, intake strainer, hose clamps, outlet hose adapter, outlet hose fitting and teflon tape. Champion’s reliable 196cc single-cylinder OHV engine has a 0.9-gallon fuel tank and 0.6-quart oil capacity (recommended 10W-30) and provides plenty of power for you to move water with confidence and efficiency. Transport your pump from one job to the next with ease thanks to the foldaway handle and never flat tires in the included wheel kit. The shaft seals are made of sturdy silicone carbide. The lightweight and durable steel frame along with this unit’s compact design make it convenient to store your pump until the next time you need it. This water transfer pump is EPA certified and CARB exempt. Buy with confidence - Champion Support and our nationwide network of service centers will back your purchase up with a 2-year limited warranty and FREE lifetime technical support.

• Dimensions: 25.0" L x 20.8" W x 19.2" H | Weight: 66.1 lb
• Complete Setup – Everything you need to start pumping - 12-foot intake hose, 20-foot discharge hose, cam action quick coupler, intake strainer, clamps, fittings and adapters (just add oil and gas)
• Efficient – 158 gallons per minute maximum delivery powered by a 196cc Champion engine with a 0.9-gallon fuel tank and 0.6-quart oil capacity
• Semi-Trash – Capable of passing solid waste up to 9/16 inch in diameter, this pump has a 2-inch inlet, a 2-inch outlet, total head of 98 feet and suction head of 26 feet
• Convenient – Featuring a durable steel frame, handle and wheel kit with never-flat tires, this pump is easy to move from one job to the next and a cinch to store
• Champion Support – Includes 2-year limited warranty with FREE lifetime technical support from dedicated experts.Impeller Material:Aluminum

User questions & answers

Question:	I have a 12 Ft. Deep pond I want to pump out. How far down can I pump it with this. How well will this pump suction when pulling water up hill. Thanks
Answer:	the intake will hang about 11 ft down into your pond...but depending on how high up the hill is...that is where you might find problems..the grade of the hill is important as well as who long the hose going up the hill is..if your hill is 25 long and it is 10 feet higher then where your pump is..that is about the limit..what you will find is you will lose "prime"..this is the suction of the pump..and the pump may overheat causing it to shut down.
Question:	will this water pump work for me to pump water out of the lake on to my grass
Answer:	I use one of these regularly and the answer to your question as asked is yes, it will move 158 gallons of water a minute from the lake onto your grass. The pump will have to be close enough to the lake for the end of the pickup tube to be submerged in the water and there are some vertical limitations as to how high the pump can be above the lake - check the specs. Once the water gets to the pump, you've got to figure out how to handle it. It's quite a stream if the motor on the pump is cranked up. We use a 50' flexible extension in addition to the included output hose and just hold the end in our hands like a fire hose - it's hard, wet work. But it does move a lot of water and fills our need perfectly.
Question:	Where is it made? Thanks
Answer:	Apparently it is made in China for Champion Power Equipment 10006 Santa Fe Springs Road Santa Fe Springs, California.
Question:	Is this pump self-priming
Answer:	No, you have to prime it. The priming process is very easy though. I just dip a bucket into the ditch where I'm pumping from and fill up the chamber. I've thought of having another funnel to use when I pour the water in, but it really isn't necessary.

Product features

Champion 2-Inch Gas-Powered Semi-Trash Water Transfer Pump with Hose and Wheel Kit

Champion’s 2-inch Chemical Water Transfer Pump is designed for fast, efficient pumping. This unit will pump 154 gallons of water a minute and is powered by a 196cc Champion engine. With clear water fittings and constructed of chemical resistant materials, this unit is your perfect pumping solution.

Key Features

• EPDM Rubber O-ring

• Fiberglass Reinforced Polyester Pump Housing, Impeller and Volute for Chemical Resistance

• Fuel Tank – 0.9 Gallon (3.4 L)

• Diameter of Inlet and Outlet – 2 in. NPT (5 cm)

• Total Head – 115 ft. (35 m)

• Suction Head – 25 ft. (7.5 m)

• Max Delivery Volume – 154 gal/min (583 L/min)

• Durable steel frame

Easy To Operate

All of the Champion products are designed with ease of use in mind. Robust, simple to operate and easy to maintain.

Multiple Uses

Multitasking is a part of life and our products are made to offer multiple effective solutions for an array of different domestic power needs.

Lightweight

We know that sometimes you need power on the go. Champion products are designed to produce the highest level of performance in the smallest package possible.

Product description

The Tsurumi HS2.4S-62 is a semi-vortex submersible trash pump with agitator. The built-in shaft mounted agitator suspends solids. The urethane semi Vortex impeller is for maximum durability and pump performance. It features a double inside mechanical seal with sic faces that provides longest operational life. The oil lifter provides lubrication of the seal faces. (Patent pending) the V-ring seal protector protects mechanical seal from abrasive particles.

• 2-Inch discharge
• 1/2-inch horse power
• 110/220 voltage
• 5.4 amps
• 20-Foot cable length

User questions & answers

Question:	I'm looking to pump sand out so I can pull my boat up to the lift. With this pump work
Answer:	it is a submersible pump so long as the plug don't get wet
Question:	I need to pump out a pool that has leaves in it, will this work
Answer:	I use mine outdoor, submerged. The only thing I hear is thrush of water over my waterfall. And I have run it 24/7 for over a year with no problems. I bought a second one to drain my jacuzzi. Great product, & very dependable.
Question:	What is max distance it will push the water
Answer:	Not sure quarter inch too small half inch too big. Ended up using half inch tube with half inch hose clamp works great.
Question:	What is max distance it will push the water
Answer:	If your not concerned about how long it takes, I used it to pump out a much smaller volume and had to switch to a different pump. I used a Master submersible utility pump, model 540094-01, 1/4 HP, also available on Amazon, but about 4x more expensive. The FREESEA was taking forever. The Master pump has a garden hose size output.

Product description

Features

»DuroMax 7 HP Air cooled O.H.V Gasoline Engine.

»3-Inch Inlet and Discharge Connections.

»Priming Port and Stainless Steel Shaft.

»NPT (National Pipe Thread) Threads for Easy Connections.

»Can Be Used for Draining Pools, Lakes, Dredging, to Floods and more!

»Includes Accessories for Easy Operation.

Technical Specifications

»3-Inch Inlet and Discharge Connections.

»Maximum Overhead Lift: 91-Ft.

»Maximum Suction Lift: 26-Ft.

»Maximum Flow Rate: 220 GPM.

»Dimensions Of Unit: 22" Long x 18" Wide 18" High.

»EPA Approved for Safe Mandated Use.

Water Pump Engine Specifications

»DuroMax 7 HP 4 Stroke Air Cooled Engine.

»Max Output: 7.0 HP / 3600 RPM.

»Max Torque: 13.2 Nm / 9.7 ft/lb.

»Displacement: 208cc, Bore: 69, Stroke: 55.

»Average Fuel Consumption: 2.4 Hours depending on load.

»Cast Iron Sleeve and Steel Bearings maximize Engine life.

What's In The Box?

»DuroMax 3-Inch Water Pump.

»Intake Hose-End Strainer.

»Threaded Hose Connectors.

»Threaded Hose Clamps.

»Tool Kit with Spark Plug Wrench.

»Operating Instructions & Manual.

Warranty

»One Year DuroMax Factory Warranty.

»30 Day Satisfaction Guarantee.

• 1 Gallon Gas Tank/2.4 Hour Run Time
• Back Flow Check Valve
• Includes intake hose end strainer, threaded hose end connectors, hose clamps, and tool kit with plug wrench
• Automatic Low Oil Shut Off
• EPA Approved

User questions & answers

Question:	What would i need to make this work
Answer:	The specs for the 11519 are on the same Pentair page as the WFE-8. They are NOT the same. I just went through the same process as you did. I bought the WFE-28 because it had an identical curve to the WF-28 I was replacing. The WFE-8 has a higher service factor than the WFE-28 (1.3 vs. 1.1), and draws more amps at 230v (10.2 vs 8.8). I have no clue how to select a pump, so I just went for the one that had the lowest amps for the water curve that matched the one I replaced.
Question:	How long does it take to prime this pump and what can I do to improve priming
Answer:	That would depend entirely on how much you pay per kilowatt hour.
Question:	Could this pump be used as a fire fighting pump with an appropriate nozzle? I live on a lake in Alaska and have plenty of water available
Answer:	Not sure, I always prime it before I start it up.
Question:	will this pump lift water out of a 14 course basement
Answer:	It's about 20' long. Which to me was VERY LONG. I had my electrician replace it with a shorter cord.

Product description

A-iPower Awpw80 7. 0HP 208cc 3in gas engine trash water pump. 12' Inlet & 20' Discharge hose included. The A-iPower AWP80 water pump features a powerful 208cc gas engine which starts easily & provides ample power to the pump to ensure smooth trouble free operation. The pump is self-priming for quick & easy operation. It's designed to pump large amounts of water which can contain hard & soft solids such as mud, leaves, small twigs, sand, & sludge. Its durable silicon carbide mechanical seals & cast iron volute & impeller keep this pump running longer & more efficiently. Its fully enclosed heavy-duty frame provides for added protection to withstand the harsh environment conditions, Provides plenty of power to get the job done.

• POWERFUL 208CC/7HP 4-STROKE SINGLE CYLINDER, AIR-COOLED GAS ENGINE
• 3 IN. NPT DIA. INLET AND OUTLET PORT
• Total discharge head lift: 85. 3ft.
• Powerful 196cc/6. 5Hp 4-stroke single cylinder, air-cooled gas engine
• Power source type: Gas Powered

User questions & answers

Question:	How size solids will pass thru pump
Answer:	no they dont. i put mine in the dishwasher and have had no problems getting it clean. even when you use it kling-ons are rare.
Question:	How many hours will a tank full of gas last
Answer:	What is BPA??
Question:	does this come with a strainer on suction hose
Answer:	There is no indication on this tenderizer or in the instruction sheet that came with it as to where it is made.It is distributed by a company in NJ>
Question:	I have a pit with about 2 feet of sand in the bottom(maybe 1 yard). There is unlimited water flowing into the pit, I need to get sand out
Answer:	No this pump is the WFE - 28. I just bought this pump a month ago. The O11519 is the WFE - 28

Product description

lightweight, compact submersible trash pump is ideal for moving water with debris (Maximum size - 1” solids). The Industrial grade cast iron housing and abrasion resistant Cast Iron Impeller with Neoprene Rubber overlay tackles tough dewatering applications and heavy usage operations. Further, the ST2040T incorporates a carrying handle, internal thermal overload protection, dual shaft seals, sealed ball bearings impeller, easy impeller clean-out, and molded 25’ Power Cable with strain relief.

• 2" Suction & Discharge
• 1 Horsepower. Pump diameter:10.3 inch, overall height: 16.8 inch
• 115 VOLT
• 79 Gallons per minute (GPM)
• 40' Maximum Head

User questions & answers

Question:	Does this have an automatic on/off float
Answer:
Question:	While this pump has a running amp of 6.8 amp, it’s staring amp is 25 amp per its manual. Do you have this pump on a 20 amp or 30 amp dedicated line
Answer:
Question:	can it handle muck and how large is inflow/outflow
Answer:
Question:	Does this have a warranty
Answer:

Product description

BE Pressure TP-3065HR Trash Pump 3", GX200, 264 GPM, 6.5 HP. Features include Recoil Start and Low Oil Alert, 85' Total Lift, and 26' Suction Lift.

• 196cc Honda GX200 Engine
• 3" Intake Connection MNPT
• 3" Outlet Connection MNPT
• 264 GPM Max Flow
• Up to 1" Solids

User questions & answers

Question:	Can i use this to clean muck and leaves from my pond
Answer:	Hello Amazon Customer! Thank you for your question concerning the Heritage Store Toner. The PH of this product is more alkaline above 7.0. Please contact us if you have any other questions, or if there is something else that we can assist you with. Thank you for choosing Heritage Store and have a nice day. Matt

Product description

BE Pressure TP-4013HM 4" Trash Pump, 580 GPM, 13HP. Features include Recoil Start and Low Oil Alert, 4" Intake Connection MNPT, and 4" Outlet Connection MNPT.

• 389cc Honda GX390 Engine
• 4" Intake Connection MNPT
• 4" Outlet Connection MNPT
• 580 GPM Max Flow
• 95' Total Lift, 26' Suction Lift

User questions & answers

Question:	Say I use this pump to empty a pool, when the pool is empty and the pump is still running, will it kill the pump
Answer:	It squeaks. It sounds like other dog toys. My dog loves these toys. He prefers them over any other toy.
Question:	Where can I buy just the pump not the engine
Answer:	It's been a long time since I bought this but if memory serves me, yes. It's my dogs favorite toy and she carries it everywere she goes.
Question:	what size solids will this pump handle
Answer:	I'd go with L. The XL was comically tiny for my dog, so I gave it to my sister for her 12-pound cat, whom she thinks the XL will fit correctly.
Question:	Is this 13 hp or 9? Both are stated in info
Answer:	I ordered a medium for my 4 month french bulldog puppy and it was too small but it might be because of the wide chest of the breed. I reordered an XL and it is a little too big so should fit in time for halloween. I would guess a medium would fit
Question:	Can discharge piece at the top (one 2 in & two 1.5 in conn) be removed & turned so the discharge port (2 in) faces the opposite direction -180 deg
Answer:	My Yorkshire is 4-5 lbs and I got him the sx but I think I really should of gone with the small. The sx fit him a little snug.
Question:	Which country it was made in
Answer:	A size bigger than what your dog usually wears. I have a 6 pound min pin/chihuahua and he wears a small but it was a bit tight on him.
Question:	What lube oil is required (detergent/non-detergent; weight of lube oil, etc. )? We need specifics on the lube oil in order to buy it for 7.5HP engine
Answer:	Hello, our pet food dispenser adopts a unique swing car bear-shaped tumbler design, it does not need electric drive, cute appearance and interesting rolling design make it more attractive. Food needs to be obtained through the wisdom of pets. Since the leakage holes are not large, there is not much food poured out, which can achieve the effect of pets enjoying interactive eating and slow feeding, and develop good slow food habits. Helps digest food better.
Question:	What type of threads are the fittings
Answer:	I think it's very easy. You only need to remove the transparent lid and put in the dog's favorite snacks. No instructions are needed. My puppy likes it very much, so I think it is very worth buying.

Product features

Gas-Powered Semi-Trash Water Transfer Pump 2-Inch 7.5 HP Trash Pump 198GPM Gas-Powered Portable Water Pump with 210cc OHV Engine

TOP OF THE RANGE WITH 75 m HEAD LIFT AND 8 m SUCTION Pump casing, single impellers and all fittings made from quality non corrosion marine grade aluminium Powered by 7.5 HP 4 stroke OHV engine 210 cc with Japanese Carburetor.

1 x 2 "OUTLET and 2 x 1.5 "OUTLET

• Three outlets, flexible water supply; high-pressure water pump, with a 2" water outlet, two 1.5" water inlets; with three plugs can arbitrarily block the water outlet flexible water supply

2" INLET PORT (50mm)

• Water pump made from non-corrosive marine grade aluminum and alloy hose fittings,powder coated pump casing,stronger than common aluminum oxide seals.

MAX HEAD LIFT 75 m

• Water pressure pump is self-priming and comes with automatic low oil cut-off protection,compact and light weight ,easy starting, reliable and fuel efficient engine

HIGH PRESSURE AND QUIET

• 2" fire pump is a quiet, high pressure, single impeller, high efficiency pump, compact and light weight. It is self-priming.

SUPERIOR PERFORMANCE

• Comes with automatic low oil cut-off protection. Easy starting, reliable and fuel efficient engine. Powder coated pump casing.

WIDE APPLICATION

• Widely used in various water environments, economical and fuel-efficient, powerful; can be used for farmland irrigation, fire fighting, road cleaning, mountain water supply, flood control drainage, garden watering

Product description

The Tsurumi HSZ2.4S-62 is a semi-vortex submersible trash pump with agitator. It has a Urethane Semi Vortex Impeller for maximum durability and pump performance. It has an attached float switch for automatic operation. The optional accessories are: vertical discharge Coupling.

• 2-inch discharge and attached float switch for automatic operation
• 1/2-inch horse power
• 110/220 voltage
• 5.4 amps
• 20-foot cable length

User questions & answers

Question:	What’s the difference between 1 pack and 16/3 besides the $200 difference
Answer:	No the hose cant be cut, you'll loose all your investment and she might leave you. These hose ain't loyal
Question:	I want to use this to drain a pool that has a LOT of leaves in it. Do I need the 3 inch discharge for this
Answer:	Yes
Question:	How much gph it pumps
Answer:	23.5 inches
Question:	what voltage
Answer:	1 3/4

Product features

HSZ2.4S Auto Electric Submersible Pump

Automatic trash pump designed to pump sand, solids and debris with minimal wear and clogging.

About Tsurumi: The Pump Technology That The World Trusts

Tsurumi introduced its overseas strategy in the 1960s. Our technical capabilities gained recognition first in Asia in the 1970s and then in the United States and Europe in the 1980s.

Following these initial successes, we sought to accelerate the overseas strategy through our International Sales Division. Remarkable successes in fields including construction, civil engineering, mining, industrial wastewater, domestic wastewater, sewage treatment, flood control, facilities designed to bring people into closer contact with water, and scenery creation have proven Tsurumi’s creativity and capability to the world.

Today Tsurumi has expanded its bases of operations and is active in 45 countries and regions. In addition to supporting a variety of worksites, our high-performance pump products are widely used in large-scale national projects, where they fulfill their roles reliably.

Product description

ECO LLC Gas Water Transfer Pump Move huge volumes of water with this smooth running, easy starting, long lasting pump. Use to drain a pool in no time, empty a flooded basement, pump out a flooded trench, fill or empty a water storage tank or reservoir, irrigate a field, hose down a construction site, help drain a levy breach and more.



Feature



ECO LLC 6.5 HP air cooled O.H.V gasoline engine.



2-Inch inlet and discharge connections



Priming sort and stainless steel shaft



NPT (national pipe thread) threads for easy connections



Can be used for draining pools, lakes, dredging, to floods and more



Includes accessories for easy operation



Ease of use: anyone can use it - easy -pull recoil start system allows for simple startup without multiple pulls



Functionality: pump out a flooded trench, fill or empty water storage tanks, irrigate fields and more



Move volume quickly capable of emptying a 40,000 gallon pool in about a dismal 4.5 hours



*Hose Not Included*



Need to move some water? The Heavy Duty Gasoline Powered Water Pump perfect for your needs.

• ➪ WORKS GREAT: FUEL EFFICIENT, HIGH OUTPUT OPERATION:Precision camshaft design offers precise valve timing and optimal valve overlap for better fuel efficency，OHV design for increased efficiency and optimal power transfer.
• ➪ GOOD VALUE: 6.5HP 160CC engines superior reliability and performance.Moves a lot of water up to158 gallons per minute,It even suck up a bit of sludge, but I would recommend, for longevity purpose, to try and avoid that situation. The more water in the mixture, the better results. Cleaning the pump area afterwards is recommended.Its easy enough to clean them out.
• ➪ EASY TO USE AND MAINTAIN: Simple throttle control,Easy, convenient, heavy duty control box,Easily accessible spark plug,Large fuel tanks,automotive type fuel cap.
• ➪ COMMON APPLICATIONS: Irrigate acre of lawn,garden and general use,Community Semi-Trash Clean ground Pond Water Remove.
• ➪ QUALITY RELIABILITY: New carburetor chamber coating and carburetor filter help to protect,Cast iron cylinder sleeve,against fuel impurities,Fuel Valve.

User questions & answers

Question:	is this pump 2 or 4 stroke engine
Answer:	4 stroke engine
Question:	how far can you suck the water
Answer:	6-8 meters
Question:	Work for oil
Answer:	Gasoline mixed engine oil above 90#. The ratio is 25:1
Question:	whats the largest size debris this trash pump can handle
Answer:	According to the size of the filter opening, you can use a smaller filter.