10 best hot water floor heats
Hot water floor heating, also known as hydronic floor heating, is a heating system that uses hot water to provide warmth to a building's floors. This technology is related to power water pumps, water pump parts and accessories, rough plumbing, and falls under the category of tools and home improvement. Here's what you need to know about hot water floor heating:
Basic Principle: Hot water floor heating operates on the principle of radiant heating. It involves running a network of water pipes or tubing beneath the floor's surface. Heated water is circulated through these pipes, transferring heat to the floor, which then radiates heat upward into the living space.
Components: The main components of a hot water floor heating system include:
- Boiler or water heater: This heats the water that circulates through the system.
- Pumps: Water pumps, often referred to as circulators, are used to move hot water through the tubing.
- Tubing or pipes: These are typically made of PEX (cross-linked polyethylene) and are installed within or under the floor.
- Manifolds: Manifolds distribute the heated water to different zones or areas within the building.
- Thermostats and controls: These devices regulate the temperature of the heated floors.
Efficiency: Hot water floor heating is known for its energy efficiency.The even distribution of heat across the entire floor surface results in comfortable, consistent warmth. It can be more efficient than traditional forced-air heating systems because it operates at lower water temperatures.
Zoning: One advantage of hydronic floor heating is the ability to create multiple heating zones. This allows different areas of a building to be heated independently, which can lead to energy savings and increased comfort.
Types of Flooring: Hot water floor heating can be installed under various types of flooring, including tile, hardwood, laminate, and carpet. Some floor coverings are more suitable than others, and it's essential to consider the thermal properties of the flooring material.
Installation: Installing a hot water floor heating system typically involves professional plumbing and HVAC expertise. The tubing or pipes are laid out in a carefully designed pattern, often in a serpentine or loop configuration, to ensure even heating.
Maintenance: Once installed, hot water floor heating systems require minimal maintenance. Regular checks of the boiler or water heater, as well as the pumps and controls, are essential to ensure proper functioning.
Advantages: Some of the advantages of hot water floor heating include improved indoor air quality (as there are no air ducts circulating dust and allergens), silent operation, and the ability to integrate with other heating methods, such as solar panels.
In summary, hot water floor heating is an efficient and comfortable way to heat indoor spaces by using a network of water pipes or tubing installed beneath the floor. Proper installation and maintenance are crucial to ensure its effectiveness and longevity as a heating solution. It can be an excellent choice for homeowners looking for a more efficient and even heating system.
Below you can find our editor's choice of the best hot water floor heats on the market
Bosch Electric Mini-Tank Water Heater Tronic 3000 T 7-Gallon (ES8) - Eliminate Time for Hot Water - Shelf, Wall or Floor Mounted
Bosch Thermotechnology
Product description
120V - requires hard wiring. 1440W element. Magnesium anode rod. Rectangular shape with 2" of foam insulation. Glass lined tank for longer life. 6 year on heater and 1 year on parts for both commercial and residential use. Temperature/pressure relief valve included. Can be mounted both horizontally or vertically. Mounts on floor or wall. Meets ASHRAE 90. 1. See Info Page for technical and installation specifications.
Manufacturer Contact Information
800-283-3787
- CONVENIENT HOT WATER HEATER: 7 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 17.5 W x 17.5 H x 14.5 D Inches
- INSTALLED VERTICALLY OR HORIZONTALLY: This larger model can be mounted vertically (7 gal. of water supply) or horizontally (5.1 gal. of water supply)- vertical orientation is installed with the cold and hot lines on top of the unit
- RELIABLE WATER SOURCE: Easily hard-wire the 7-gallon model to provide the on-demand reliable water source your home or office needs
- IMPORTANT INFORMATION: Heating capacity of 1440 watts and a temperature range of 65-145°F max. Operating pressure-150 psi. Water fittings-3/4 inch Male NPT. Electrical requirements (Amp 12A/Volts 120)
- EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included for vertical orientation only); simply tap into the cold water line and install the water heater directly at the sink to provide hot water
User questions & answers
| Question: | What is the recovery time if the 7 gallons of hot water is used |
| Answer: | I have the 4 gallon tank and it is not too bad for the reheat |
| Question: | Can I reduce the pipe's size from 3/4 in to 1/2 in without any negative effect on the unit |
| Answer: | No harm to unit.....Max water flow will be reduced a little. |
| Question: | Can i use this to replace a small rv hot water heater |
| Answer: | Yes, but realize that it's electric and draws quite a few amps, most rv water heaters are propane. |
| Question: | The Manual request for the ES8 a 20 Amp breaker and 12GA wire. The wattage however is 1440 with 12 Amps. Why then 20 Amp breaker and not |
| Answer: | I would use a 20 amp circuit with 12 ga wire but there are no inrush concerns with a resistive load. A heating element does not have a higher initial current draw like a motor. It draws 1440 watts or 12 amps at 120v. Since 14 ga wire must be fused for 15 amps, this device by itself is already at 80% of the circuit’s capacity. |
Product features
Bosch ThermoTechnology
The Bosch Tronic 3000 T point-of-use electric mini-tanks are available in three compact sizes, which can be wall-hung (bracket included) or floor-mounted. They fit easily under a sink, even in a cabinet space, and because they have a sleek and attractive design, they blend in seamlessly with existing decor when installed in a visible location. Simply tap into the cold water line and install the water heater directly at the sink to provide hot water. Great for a wide range of locations!
Water Where You Need It
Provides hot water quickly at point of use and comes with temperature /pressure relief valve installed - 2.5 and 4 gallon tanks feature a simple 120 VAc plug-in connection (1440 watts).
Quality for Long-Life
Thick CFC-free foam insulation for maximum energy efficiency, glass-lined tank for durability.
Great for Small Spaces
Water heaters are compact and lightweight and can be floor, shelf, or wall mounted (except 7 Gallon) - features a sleek and attractive design to blend seamlessly with decor.
Minimize Wait Time for Hot Water
Waiting for hot water at a sink located far from a primary heating source can be frustrating. Only having access to cold water from a sink is just not useful, and plumbing a hot water line to every sink in a home or business requires time and money. To get hot water where it’s needed, when it’s needed, a better solution is to use the Tronic 3000 T from Bosch: a point-of-use electric mini-tank heater. This heater can supplement a primary water heating source, or be used under a single sink. In fact, the Bosch Tronic 3000 T can be used for three different applications: as a sole water heating source for a single sink, as a supplement to an existing heater located far from the sink, and as a buffer installed in-line with tankless water heaters that experience intermittent cold water, also known as 'cold water sandwiching'. No matter the configuration, there’s minimal stand-by loss from this premium mini-tank water heater.
Bosch Electric Mini-Tank Water Heater Tronic 3000 T 2.5-Gallon (ES2.5) - Eliminate Time for Hot Water - Shelf, Wall or Floor Mounted
Bosch Thermotechnology
Product description
Get hot water where it's needed, when it's needed with the Bosch ES4 Tronic 3000 T Electric water heater. This 2.5-gallon capacity point-of-use mini-tank fits right under your sink and provides a practical and effective solution to your hot water needs. This smaller model can be plugged right into a 120-volt outlet with the 36-37" cord, or can be installed in-line with a larger hot water source to provide "on-demand" use. The glass-lined tank offers great insulation and added durability, while the heater's fast recovery rate eliminates long waits for hot water. An external dial allows you to easily control the temperature range, and the temperature-and-pressure relief valve enhances your safety. The ES4 Tronic 3000 T from Bosch has a sleek and attractive exterior design that blends in seamlessly with existing decor when installed in a visible location, making this heater a great option in any room.
Manufacturer Contact Information
800-283-3787
- CONVENIENT HOT WATER HEATER: 2.5 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 13.75 W x 13.75 H x 10.75 D Inches
- LONG LASTING QUALITY: This electric water heater is easy to maintain and has premium glass-lined material for a long service life. (Amps 12A, Volts (VAC) 120)
- INDEPENDENT INSTALLATION: 36-37" cord plugs into a 120 volt outlet for independent installation or in-line with a large hot water source
- FAST RECOVERY RATE: Eliminates long waits for hot water at your sink, get on demand hot water at your every need (supplies up to 2 sinks at a time)
- EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included); simply tap into the cold water line and install the water heater directly at the sink to provide hot water
User questions & answers
| Question: | Is it necessary to connect an expansion tank to this heater (for safety purposes)? It states something to that effect in the user manual |
| Answer: | The expansion tank for this heater is not required. Most people already have these installed in their homes but if not then it would be Ok without it as there is a pressure relief valve on top if something happened. GlobalTowne is an authorized Bosch distributor. |
| Question: | would this be able to supply a shower |
| Answer: | A standard flow shower head is around 2.5 gallons per minute. A low flow head is around 1.5 gallons per minute. The recovery rate for a 90 degree temperature rise is 6.8 gallons per hour! So even the 7.5 gallon unit would only provide 4 minutes of shower time before the temp dropped off dramatically. (even at the low flow rate..) |
| Question: | Can be used "in-line with a large hot water source"? Would it help a large bathtub that runs out of hot water before it gets full from main tank |
| Answer: | If your bathtub is bigger than your main heater tank, this unit isn't going to do much for you. It will add 2.5, 4, or 7 gallons to the capacity of your main tank, depending on which Bosch unit you buy. The 7 gallon unit requires a specially wired circuit. You will also get a little bit of lukewarm water that was in the line between your main heater and the Bosch unit. Unless your main tank is awfully small and your bathtub massive, the 4 gallon unit should work for you. Maybe a demand type thankless heater in your bathtub hot water feed would be a better choice, but be careful to size it properly for your desired flow rate and temperature rise. Also a tankless is likely to require special wiring. |
| Question: | When this heater is connected to the hot water line, what happens with the cold water that was sitting in the pipes |
| Answer: | When the tap is opened, the hot water in the unit flows out. The colder water that was sitting upstream of the unit, enters the unit to be heated. If the tap remains open, the newly heated water flows out, being replaced eventually, (depending on the distance to the main water heater), with the water from the main water heater. You will probably set the unit temperature to equal the main water heater temperature, if you want to keep a constant temperature, but other scenarios are possible. |
Product features
Bosch ThermoTechnology
The Bosch Tronic 3000 T point-of-use electric mini-tanks are available in three compact sizes, which can be wall-hung (bracket included) or floor-mounted. They fit easily under a sink, even in a cabinet space, and because they have a sleek and attractive design, they blend in seamlessly with existing decor when installed in a visible location. Simply tap into the cold water line and install the water heater directly at the sink to provide hot water. Great for a wide range of locations!
Water Where You Need It
Provides hot water quickly at point of use and comes with temperature /pressure relief valve installed - 2.5 and 4 gallon tanks feature a simple 120 VAc plug-in connection (1440 watts).
Quality for Long-Life
Thick CFC-free foam insulation for maximum energy efficiency, glass-lined tank for durability.
Great for Small Spaces
Water heaters are compact and lightweight and can be floor, shelf, or wall mounted (except 7 Gallon) - features a sleek and attractive design to blend seamlessly with decor.
Minimize Wait Time for Hot Water
Waiting for hot water at a sink located far from a primary heating source can be frustrating. Only having access to cold water from a sink is just not useful, and plumbing a hot water line to every sink in a home or business requires time and money. To get hot water where it’s needed, when it’s needed, a better solution is to use the Tronic 3000 T from Bosch: a point-of-use electric mini-tank heater. This heater can supplement a primary water heating source, or be used under a single sink. In fact, the Bosch Tronic 3000 T can be used for three different applications: as a sole water heating source for a single sink, as a supplement to an existing heater located far from the sink, and as a buffer installed in-line with tankless water heaters that experience intermittent cold water, also known as 'cold water sandwiching'. No matter the configuration, there’s minimal stand-by loss from this premium mini-tank water heater.
AB Plate Heat Exchanger, 3"x8" 20 Plates Water To Water Heat Exchanger, Copper/SS316L Stainless Steel Brazed Plate Heat Exchanger For Floor Heating, Water Heating, Snow Melting
Product description
Built with high quality stainless steel 316L and 99.9% copper, this model produces a counter-current flow to maximize heat efficiency.
This product is highly efficient due to the corrugated plates which produce a high, turbulent flow in a true counter-current direction. With their compact size and reduced material content, they can be the most economical heat transfer choice.
Product Information and Specifications
Stainless Steel 316L/Copper 20 Plates
Port Size: 3/4" MPT
130,000 – 180,000 Btu/hr Capacity
Floor Heating Capacity: 180,000 Btu/hr
Floor Heating GPM (Boiler = 180F / System = 100F-130F): 12.4 GPM / 12.4 GPM
Domestic Hot Water Heating Capacity: 130,000 Btu/hr
Domestic Hot Water Heating GPM (Boiler = 180F / Pipe 40F-140F): 9 GPM / 3 GPM
Min. Operating Temp.: -256F
Max. Operating Temp.: 482F
Design Pressure: 435psi
Test Pressure: 653psi
Materials: Stainless Steel 316L, 99.9% Copper
Dimensions: 3" x 8"
Applications
Domestic Hot Water Heating
Central Heating
Floor Heating
Driveway Snow Melting
Radiator Heating
Heating and Cooling HVAC Installation
Solar Heating
- 【Premium Quality】Our plate heat exchanger is UL listed and it is made of high quality 316L stainless steel which are brazed together by 99.9% copper at the edges for a reliable and rugged part to form a durable, integral piece that can resist leakage and withstand high pressure and temperature.
- 【Convenient For Use And Energy Saving】Smooth Thread makes a easy, quick, flexible hookup. Highly conductive and super-thin stainless steel plates make good performance and economy for heating transfer and cooling without electricity consumption and oxygen consumption.
- 【Product Parameter】130,000 - 180,000 BTU CAPACITY: Depending on the application, this product can produce 130kBtu to 180kBtu per hour. 20 PLATES; 3"x8", 3/4" MPT: 20 brazed plates work to efficiently heat water for your application.
- 【Multiple Applications】AB water heat exchanger offers the highest level of thermal efficiency and durability in a compact & lightweight unit, perfect for domestic water heating, Floor Heating, Snow Melting, District or Zone Heating Systems, Outdoor Wood Furnaces, Hydraulic and Lube Oil Coolers, Radiator Heating, Hydronic Heating, Solar Heating, Wood Boiler.
- 【100% Satisfaction Service】 Our heat exchanger comes with a 1-year warranty to cover manufacturer defects. And we provide 100% satisfaction service as well as best premium quality product, if you have any problem about the product, please contact us freely.
User questions & answers
| Question: | Will this device work on Steam, 300f+ and 50 to 80 Psi |
| Answer: | I am not 100% sure. I would use a good thermostatic steam trap on the outlet side of the steam side. The worst it can do is fail. |
| Question: | I want to use it as a zone off of my main house heater with antifreeze for heating of a garage floor. How can I mount it to the distribution board |
| Answer: | Cut a board to fit in between the connections and use a strap and screws or bolts to hold it firm |
| Question: | Is stainless steel recommended for salt water chlorination pool systems or do I need titanium |
| Answer: | Stainless steel will work chlorine and salt water pools. |
| Question: | do the liquids touch directly? I want to have two different liquids interacting and do not want them to mix |
| Answer: | Two different liquids flows in the different channels and separated by the plate wall. They will not mix. |
Product features
Specifications
Floor Heating Capacity: 180,000 Btu/hr
Floor Heating GPM (Boiler = 180F / System = 100F-130F): 12.4 GPM / 12.4 GPM
Domestic Hot Water Heating Capacity: 130,000 Btu/hr
Domestic Hot Water Heating GPM (Boiler = 180F / Pipe 40F-140F): 9 GPM / 3 GPM
Efficient
Min. Operating Temp.: -256F
Max. Operating Temp.: 482F
Design Pressure: 435psi
Test Pressure: 653psi
Materials
Materials: Stainless Steel 316L, 99.9% Copper
Dimensions: 3" x 8"
Applications
Domestic Hot Water Heating, Central Heating, Floor Heating, Driveway Snow Melting, Radiator Heating, Heating and Cooling HVAC Installation, Solar Heating,
and more.
Euroflex Monster Mop New Hot Floor Cleaner, Exothermic Heat, Dry Mop or Heated Wet
Product description
Monster Mop is the best way to clean all your home's hard surfaces with or without chemicals. The Monster Mop uses the power of heat that is evenly distributed on the bottom plate where one microfiber pad is filled with a precise, two ounce liquid mixture of your choice. Heat is the element that makes whatever method you use to clean much more effective. Choose just tap water to clean and sanitize your floors and help your environment JUST ADD HEAT. Choose your favorite cleaning agent and watch your floor gleam JUST ADD HEAT. Choose to treat your floors with specific additive for enhanced shine and rejuvenation JUST ADD HEAT. Choose to disinfect and destroy bacteria for added protection on your floors JUST ADD HEAT. Choose an essential oil to freshen and add ambiance to your home JUST ADD HEAT.
- Automatic pad moisture control
- Ultra-lightweight design
- 360° Swivel handle
- Cleans up to 1000 sq. ft. with 2 ounces of water
- Includes 2 washable microfiber pads, 10 disposable pads, parking pad, filling cup and 20' detachable cord
User questions & answers
| Question: | Can this be used on wood floors |
| Answer: | I believe you may use this on wood floors if you perform a quick sweep, & don’t delay, which can cause puddles to form. |
AB Plate Heat Exchanger, 4"x 12" 60 Plates Water To Water Heat Exchanger, Copper/SS316L Stainless Steel Brazed Plate Heat Exchanger For Floor Heating, Water Heating, Snow Melting
Product description
Built with high quality stainless steel 316L and 99.9% copper, this model produces a counter-current flow to maximize heat efficiency.
This product is highly efficient due to the corrugated plates which produce a high, turbulent flow in a true counter-current direction. With their compact size and reduced material content, they can be the most economical heat transfer choice.
Product Information and Specifications
Stainless Steel 316L/Copper 60 Plates
Port Size: 1" MPT
500,000 - 600,000 Btu/hr Capacity
Floor Heating Capacity: 530,000 Btu/hr
Floor Heating GPM (Boiler = 180F / System = 100F-130F): 36 GPM / 36 GPM
Domestic Hot Water Heating Capacity: 600,000 Btu/hr
Domestic Hot Water Heating GPM (Boiler = 180F / Pipe 40F-140F): 41 GPM / 12 GPM
Driveway Snow Melting Capacity: 500,000 Btu/hr
Driveway Snow Melting GPM (Boiler = 180F / 50% Glycol = 110F-140F): 34 GPM / 38 GPM
Min. Operating Temp.: -256F
Max. Operating Temp.: 482F
Design Pressure: 435psi
Test Pressure: 653psi
Materials: Stainless Steel 316L, 99.9% Copper
Dimensions: 4" x 12"
Boiler Plate Heat Exchanger Applications
Domestic Hot Water Heating
Central Heating
Floor Heating
Driveway Snow Melting
Radiator Heating
Heating and Cooling HVAC Installation
Solar Heating
- 【Premium Quality】Our plate heat exchanger is UL listed and it is made of high quality 316L stainless steel which are brazed together by 99.9% copper at the edges for a reliable and rugged part to form a durable, integral piece that can resist leakage and withstand high pressure and temperature
- 【Convenient For Use And Energy Saving】Smooth Thread makes a easy, quick, flexible hookup. Highly conductive and super-thin stainless steel plates make good performance and economy for heating transfer and cooling without electricity consumption and oxygen consumption.
- 【Product Parameter】500,000 - 600,000 BTU CAPACITY: Depending on the application, this product can produce 500kBtu to 600kBtu per hour. 60 PLATES; 4"x 12", 1" MPT: 60 brazed plates work to efficiently heat water for your application.
- 【Multiple Applications】AB water heat exchanger offers the highest level of thermal efficiency and durability in a compact & lightweight unit, perfect for domestic water heating, Floor Heating, Snow Melting, District or Zone Heating Systems, Outdoor Wood Furnaces, Hydraulic and Lube Oil Coolers, Radiator Heating, Hydronic Heating, Solar Heating, Wood Boiler.
- 【100% Satisfaction Service】 Our heat exchanger comes with a 1-year warranty to cover manufacturer defects. And we provide 100% satisfaction service as well as best premium quality product, if you have any problem about the product, please contact us freely.
User questions & answers
| Question: | Can this be used for an outdoor wood furnace |
| Answer: | That is what I used it for, it heats my domestic water before it goes to the furnace coil |
| Question: | what is it of the depth of this product |
| Answer: | If you asking how thick this is from plate 1 to plate X (X meaning depending on the number of plates that is selected) figure about an inch for every 10 plates. Plus it's in the description of the dementions depending on the one you select. |
| Question: | Can this be used to cool 150 gallons of 80 proof vodka from room temperature to 30F using a chiller with a 1hp pump |
| Answer: | Party at your house |
| Question: | are the in/out ports threaded |
| Answer: | Yes. It has all 1 inch male Pipe thread fittings. |
Product features
Specifications
• Stainless Steel 316L/Copper 60 Plates
• Port Size: 1" MPT
• 500,000 - 600,000 Btu/hr Capacity
• Min. Operating Temp.: -256F
• Max. Operating Temp.: 482F
• Design Pressure: 435psi
• Test Pressure: 653psi
• Materials: Stainless Steel 316L, 99.9% Copper
• Dimensions: 4" x 12"
• Floor Heating Capacity: 530,000 Btu/hr
• Floor Heating GPM (Boiler = 180F / System = 100F-130F): 36 GPM / 36 GPM
• Domestic Hot Water Heating Capacity: 600,000 Btu/hr
• Domestic Hot Water Heating GPM (Boiler = 180F / Pipe 40F-140F): 41 GPM / 12 GPM
• Driveway Snow Melting Capacity: 500,000 Btu/hr
• Driveway Snow Melting GPM (Boiler = 180F / 50% Glycol = 110F-140F): 34 GPM / 38 GPM
Applications
• Domestic Hot Water Heating
• Central Heating
• Floor Heating
• Driveway Snow Melting
• Radiator Heating
• Heating and Cooling HVAC Installation
• Solar Heating
Mophorn Plate Heat Exchanger, 5" x 12" 50 Plate Water to Water Heat Exchanger, Copper/SS316L Stainless Steel Brazed Plate Heat Exchanger 1 Inch FPT Ports For Floor Heating, Water Heating, Snow Melting
Product description
50 Plate Heat Exchanger
The heat exchanger plate features stainless steel 316L, stainless steel 304, and brazing material copper. It is used for transferring heat from one hot water source to another without mixing the two different water sources—heating tap water with high-temperature hot water, low cost of cleaning, and environmental protection. The exterior is a flat plate design, and the interior is corrugated plate design. Compact design allows for more flexibility in installation.
Stainless Steel Material
The plates adopt 316L stainless steel material, the upper and lower reinforced panels feature 304 stainless steel. High heat exchange efficiency, good rust resistance, and strong corrosion resistance.
Excellent Thermal Performance
The plate heat exchanger beer can quickly switch between two hot water sources, or heat cold water before it enters the water heater, eliminating the need to use fuel to drive the water heater.
Energy Optimized
If the hot side can provide enough heat, the cold side's water can be heated to the preset temperature. No electricity consumption, no oxygen consumption, environmental protection, and the economy.
Compact Design
The upper and lower panels are designed for flat plates with strong pressure resistance and long service life; The interior is a corrugated plate, saving space and strong practicality. Exquisite design, simple structure.
Easy To Installation
The plate chiller wort comprises four FPT 1" ports located on the same side and additional hoop for fixing it. Fewer installation steps, easy to use, and no need for too much installation experience.
Versatile Use
Suitable for outdoor wood furnaces/boilers, plumbing systems, the domestic water applications, radiant floor heating projects, HVAC industry, dairy/food/beverage industry, refrigeration industry, etc.
- 【PREMIUM QUALITY】- This plate exchanger is made of high-quality 316L stainless steel and is brazed together by 99.9% copper at the edges. The upper and lower reinforced panels adopt 304 stainless steel. Sturdy and durable, and high-temperature resistant.
- 【HIGH THERMAL PERFORMANCE】- Under the premise of heating and tap water are not mixed, the heating system's hot water is used to heat the tap water, so there is no need to use fuel. Low energy consumption and high efficiency.
- 【COMPACT & FLEXIBLE DESIGN】- The interior is a corrugated plate, and the exterior is a flat plate. Compared with other thermal conductivity equipment, the design is exquisite, the structure is simple, and the stereo is smooth. High durability. Less space.
- 【CONVENIENT INSTALLATION】- The flat plate heat exchanger comprises four FPT 1" fixed interfaces, and a pair of hoop attached will firmly fix the plate heat exchanger beer so that your installation is more firm and straightforward.
- 【HIGHLY VERSATILE】- For use with outdoor wood furnaces/boilers, plumbing systems, snowmelt systems, swimming pools, HVAC and refrigeration systems, solar systems, oil cooling and other liquid to liquid heat transfer applications.
BACOENG 3/4 inch NPT Hot Water Circulation Pump for Floor Heating & Recirculating System w/ Connectors
BACOENG
Product description
Performance Data:
1.Model:RS15-6G
2.Rated Power(W):93/67/46
3.Inlet/Outlet:3/4"
4.Max Flow（l/min）:50/35/21
5.Max Head(FT):20/17/10
6.Voltage/Frequency/60HZ
7.Materials:Pump housing: Cast Iron
Impeller: Corrosion-resistant, Composite, PES
Shaft: Ceramic
Bearing: Carbon axial
8.Motor Feature:Single phase,Closed, externally ventilated
Heavy Duty Motor housing (Won't get overheat even continuous running)
Insulation class: F
Protection class: IP44
Application:
Used in Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on.
Advantages:
1.High temperature resistance, anti-fraying, high efficiency, high flow,leak-tightness, low consumption
2.Super silent, environmental protection, aesthetics, ease of installation.
3.Built-in high sensitive electronic sensors with three-speed control.
Specification
1.Suitable for Medium: hot water and ethanol maximum ratio of 1:1
2.Performance: Liquid temperature range:0 - 110 Celsius,Maximum working pressure:10bar
3.Ambient Temperature: Not higher than 40 Celsius.
4.Mounting Position: Shaft horizontal mounting
5.Pump Settings: single-phase pipeline pump 3 files manually controlled single-phase motor is not overloaded casting pump length 130 mm
- Main Parameter - Power:93/67/46W; In/Outlet:3/4''NPT; Voltage:115V, 60Hz; Installation length:5.1inches; Liquid:32 - 230℉; Green
- NPT Standard VS Others BSP - 1/2" x 3/4" NPT, Lead-Free Brass fitting *2; The most useful & standard connector to prevent the leaks in hot water recirculating system.
- FEATURES & MATERIAL - Built-in high sensitive electronic sensors with three-speed control, designed for energy saving(≤1kW·h one day); Super silent, hardly feel it at work; Anti-fraying; Cast Iron Pump
- Flexible Application - Directly Used in hot water recirculating and industrial cooling system. Also a Wise Choice for DIY: Add a timer to be more energy saving. Add a bridge valve to be used in no return pipe system
- 2 Years Warranty
User questions & answers
| Question: | Will this pump work with a tankless system and 110volts? Also, could I use a timer on it so the tankless system does not run during the night |
| Answer: | No not recommended to use with thankless unless you have a return line !! |
| Question: | How do I make sure the adaptor fittings are in the package? I got 2 of another brand missing the washers and brass fittings |
| Answer: | My package came with fittings and washers they were down in the left styrafoam pocket in box |
Product features
Fast Hot Water, Warm Your Home
BACOENG 3/4'' 115V Hot Water Circulation Pump
BACOENG Offer HVAC and Plumbing Solution.
BACOENG Circulating Pump Series: Suitable for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on.
FEATURES
- · Factory nameplate details
- · Three-speed control & Air release valve
SUPER QUIET
- · Hardly feel at work
- · 0 noise
THREE SPEED CONTROL
- · Adjustable at any time
- · Performs the highest power at "3"
APPLICATION
- · Suitable for hot water circulating or industrial cooling in boilers, ground heating system, solar water heater and so on.
- · Also avaliable for other liquid(32-230℉)
Watts Premier Instant Hot Water Recirculating Pump System with Built-In Timer
Watts Premier
Product description
The Watts Hot Water Recirculating Pump provides hot water at every faucet or shower when needed, eliminating wasted water and saving up to 15,000 gallons per year. It is easy to install on any water system and requires no additional piping. The unique design of the pump ensures quiet, maintenance-free operation. The system includes a built-in 24 hour, a dual setting programmable timer to activate the pump only when needed. Please note this will not work with a tankless water heater.
From the Manufacturer
The Watts Premier hot water recirculation pump puts hot water at every tap when you want it. Saves up to 15,000 gallons per year. The pump brings convenience and savings to your home, giving you hot water instantly at every faucet, when you need it. This unique product is easy to install and not only provides you with the convenience of hot water when you need it, but saves an average of over 11,000 gallons per year. *May not work with a tankless water heater.
- Kit includes a pump with timer with 10' cord, 2 adapters with rubber washers, valve mounting screws, sensor valve, and two 12-inch supply lines
- Voltage: 120 volts, Item Weight: 8.5 pounds. Overall Dimension: 6.2 x 6 x 5 inches
- Provides hot water at every faucet or shower when needed and helps eliminate wasted water
- Easily installs to existing plumbing and is maintenance-free
- 24-hour programmable timer activates pump when you need it
User questions & answers
| Question: | How many amps is the pump |
| Answer: | The pump runs at .22 Amps, and recommended supply current of 2.5 Amps. A standard 15 Amp wall socket is all that you need to plug it into. The .22 Amps the pump indicates maximum start up current, actual running current will be somewhat lower. Inrush current is always higher, when the motor has to start up, actual running current will be lower, example a 1 HP motor will have an inrush current of about 34 Amps, just until the motor reaching normal operating speed then it drops down to around 7.5 Amps, quite a bit lower, but the breaker needs to be able to handle the inrush currents. |
| Question: | can i used without the sensor valve |
| Answer: | Yes.As long as you have a return line running back to your water heater. You do not need a separate return line at every faucet. You need one return line. Follow your hot water pipe to the end (last branch takeoff), cut in a tee and run pex or copper. At the bottom of your tank style water heater there is a small, usually plastic valve. Remove that valve and screw in a 3/4" brass or stainless pipe nipple. Then install a tee inline with side outlet looking up and in the end of the tee put a brass drain valve to replace the crappy plastic one if applicable. The side connection on the tee you installed is where you will connect your return line you just ran. I did not notice if this pump had a built in check valve but if not you may want one to prevent water from flowing through both the hot water main and the hot water return to the faucet nearest the end. Water will follow the path of least resistance so the last branch on the main usually ends up being similar in distance to the water heater from either line. As a result water can back feed up the return line and will bring the cold water entering the tank with it. This is especially true when a second source of hot water is being used at the same time hence the need for a check valve. |
| Question: | If the pump is on, and the water is hot, the sensor valve closes, right? Isn't the pump trying to push water against a totally closed line |
| Answer: | This type of pump is designed to operate with zero flow, and it actually uses a little less electricity when it is not moving water. When the sensor valve closes, the pump does not move any water. When the sensor valve reopens, the pump moves water from the hot water line into the cold water line. |
| Question: | So what this does is move the hot water through the pipes constantly, not just when you need it? Seems like an energy suck. Is it |
| Answer: | If you run this all the time you will likely increase your water heating costs significantly as you are turning your pipes into a big radiant heater. You can use the built in timer to only have it come on at set periods, but this will only work if you have a very fixed schedule. I attacked this another way. I plugged the unit into a TP-Link HS110 Smart plug that is Alexa controlled. I can just say turn on hot water pump or turn off hot water pump when I want to control it. But that was not good enough for me. I found that if this pump ran for four minutes it would give me hot water at the distant shower that I wanted, so I did the following. I wrote a routine to turn on the pump, wait four minutes and then turn it off. While I can run this by voice, I bought the new Amazon Alexa Button, they are about $14 for a two pack. The button is battery operated and communicates to another Alexa device. Just before I take a shower I push the button and within four minutes the water will be hot without having to run water. |
Product features
Includes Everything Needed
Pump with timer and 10 ft. electric cord, two adapters with rubber washers, valve mounting screws, sensor valve, two 12 in. supply lines
Easy Installation
Easy to install, usually less than one hour.
Save Money
Save money, up to 10% of your water bill annually.
Grundfos 59896341 UPS15-58FC Super Brute Circulator, Red, Small
Grundfos
Product description
The pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid. The pump is characterized by ceramic shaft and radial bearings, carbon axial bearing, stainless steel rotor can and bearing plate, corrosion-resistant impeller, composite, PES, and cast iron pump housing. The motor is a 1-phase motor. No additional motor protection is required.
From the Manufacturer
Grundfos UPS15-58FC circulator pump (Grundfos# 59896341) incorporates a cast iron housing, three speed motor (Low/Med/High) and a built-in, removable check valve. Grundfos UPS15-58FC is among the most popular and most versatile circulator pump models on the market. Pump's performance parameters cover nearly all traditional heating applications - from radiant and baseboards, to fan coils and zoning and many others. 3 speeds allow to set up the circulator pump in a way, that matches the system's requirements, while wet rotor design allows it to be virtually silent while operating.
- Ceramic shaft and radical bearings
- Carbon axial bearing
- Stainless steel rotor can and bearing plate
- Corrosion-resistant impeller
- Cast iron pump housing
User questions & answers
| Question: | How many lineal feet of 1/2" pipe can this pump be used for |
| Answer: | Not exactly sure but my home is 2700 square feet with 3 bathroom and this feeds instant hot water to all 3. I would recommend youget a timer with this pump as they run all the time and it leads to premature wear of copper pipe without a timer. |
| Question: | is there a switch to change speed and can a wall air temperature thermastate be connected to this pump? thermastste to |
| Answer: | Yes there is a switch located on the pump for 3 speeds. Not sure what your application is but you can wire in a wall thermostat but it would have to be 115v/line voltage thermostat. |
| Question: | Will use pump to recirculate hot water in my home and keep the water temp near 110. Will connect to 1/2 copper lines in and out. Right pump |
| Answer: | I circulate water in 3/4 lines in a closed loop, radiant system using this pump. Installed 1st one 6 yrs ago and have had no problems. |
| Question: | Re: the hi/med/lo pump speed settings, does anyone know what the gpm each setting represents |
| Answer: | Alot of the flow depends on the head pressure but a rough number would be around 11 15 & 17 |
Happybuy RS15-6 Hot Water Recirculating Pump 110V Circulation Pump 3/4-Inch NPT 3-speed Recirculation Pump 9.5 Gpm for Water Heater System
Happybuy
Product description
3/4 inch Hot Water Circulation Pump RS15-6 Hot Water Circulating Pump Red Three Speed Water Circulation Pump
The listing is about Hot Water Circulation Pump 3/4 inch RS15-6 3-speed circulating pump. Brand new with top quality, you can rest assured to buy.
Superiority
1. Built-in high sensitive electronic sensors with three-speed control.
2. High efficiency with low consumption. High temperature resistance, anti-fraying, high flow and leak-tightness.
3. Super silent, environmental friendly, aesthetics, easy to install and operate.
Application
Our hot water circulation pump RS15-6 is suitable for a wide range of applications, for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on.
Feature:
Hot water circulation pump RS15-6
Three speed motor
Longer life and better performance
Super silent and environmental friendly
Easy to install and operate
Suitable for a wide range of applications
Specification:
Color: Red
Model: RS15-6
Materials
Pump housing: Aluminum
Impeller: Corrosion-resistant, composite, PES
Shaft: 45 # steel
Bearing: Carbon axial
Voltage/Frequency: 110-120V, 60Hz
Rated power: 93/67/46 W
Max pressure: 145 psi (10 bar)
Flow: 36/29/20 LPM (9.5/7.66/5.28 GPM)
Max head: 6/4.9/4 m (20/16/13 ft)
Inlet/Outlet: NPT 3/4 inch (19.05 mm)
Liquid temperature range: 0-100ºC (0-212ºF)
Max ambient temperature: 40ºC (104ºF)
Package size: 15x15x14 cm (6x6x5.5 inch)
Gross weight: 2.5 kg (5.51 lbs)
Package Content:
1 x Hot Water Circulation Pump
2 x Coupling
2 x Seal
1 x Product Manual
- 【MAIN PARAMETER】 - The hot water circulation pump features NPT 3/4 inch (19.05 mm) inlet/outlet. Voltage/Frequency: 110-120V, 60Hz. Rated power: 93/67/46 W. Max pressure: 145 psi (10 bar),the hot water circulation pump with three-speed control. Flow: 36/29/20 LPM (9.5/7.66/5.28 GPM). Max head: 6/4.9/4 m (20/16/13 ft);Pump housing: Aluminum. Impeller: Corrosion-resistant, composite, PES. Shaft: 45 # steel. Bearing: Carbon axia
- 【CONVENIENT】 - Easy installation, just need a wrench to connect the pump to the pipeline, saving you the cost of plumbers; Instant hot water, waiting for 2-3 minutes in the past, now it takes only 15 seconds to get hot water (the kitchen takes about 1 minute to get hot water due to low flow restriction)
- 【HUMANIZED DESIGN】 -Prevent pipes from freezing in winter, especially for cold winter areas. In addition, if your pipes pass through the floor, the floor will also become warm.
- 【ADVANTAGE】 - The hot water circulation pump features high efficiency with low consumption. High temperature resistance, anti-fraying, high flow and leak-tightness. Super silent, environmental friendly,saving energy, running power, reducing the waste of cold water and waiting time, suitable for water scarce areas, such as desert areas
- 【WIDE APPLICATION】 - Our hot water circulation pump RS15-6 is suitable for a wide range of applications, for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm and so on
User questions & answers
| Question: | Is there a wiring diagram |
| Answer: | No you just plug it up |
| Question: | Having a hard time getting this pump to work. It’s not pumping. I tried filling it with water to prime but still nothing. Any tricks |
| Answer: | Put on 3. Should work, very quiet may be running |
| Question: | Can I hook up a thermostat to control it |
| Answer: | If you buy a thermostat that has an outlet on it you wired up like that you got a bug up the 110 V normal outlet plug |
| Question: | What is the purpose of the exhaust screw |
| Answer: | it is to bleed the air off if necessary |
Product features
High-Quality Material
The booster pump is constructed of durable with aluminum pump housing and iron pump head.
Boost Water Flow
Powerful flow with 5.28/7.66/9.5 GPM and the highest head can reach 13/16/20 ft. More convenient and efficient to use water.
3-Speed Circulating
The water circulation pump is a solar pump with a 3-speed circulating switch.
Keep Quiet To Work
This pressure booster pump boasts a powerful motor for stable performance and low noise.
Easy To Installation
The booster pump is easy to install for appliances and industrial equipment such as air conditioning and water heater for powerful flow.
Wide Application
The water pressure pump city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm, and so on.
Water Pressure Booster Pump
The listing is about Water Circulation Pump RS15-6, solar pump, 3-speed circulating pump. The water booster pump is built-in high sensitive electronic sensors with three-speed control. It is suitable for a wide range of applications, for city buildings, suburban villas, houses, water and pressurized with industrial equipment, air conditioning, boilers, solar circulating water, hot water circulating warm, and so on.
Latest Reviews
View all
Wireless Spy Cameras
- Updated: 30.01.2023
- Read reviews
Computer Headset For Mac
- Updated: 29.03.2023
- Read reviews
Wilson Televisions
- Updated: 18.01.2023
- Read reviews
Sweatshirts 20S
- Updated: 07.03.2023
- Read reviews
Amscan Lunch Boxes
- Updated: 24.05.2023
- Read reviews