12 best titan electric water heaters

Product description

Titan Original Product N-120 11.8 KW 220V 54A Tankless water heater SCR-2

• Tankless Water Heater

User questions & answers

Question:	why can't I get any water pressure or hot water in my tub? I works great in the kitchen and bathroom sink. this makes no sense to me
Answer:	Most likely the lines running to your kitchen and bath sink are partially clogged with build up. That causes a water flow rate too low to trip the Titan water heater on. Most likely new water lines need to be run there. Good luck
Question:	How can we purchase the Titan N120 Tankless water heater
Answer:	Cash usually works well. You can buy direct from Tital, or a number of plumbing outlets, we have a few in Florida. I have also seen them on ebay & Amazon, about $200-$250.00 new
Question:	we have a 1600 sf home want to know how big is the tankless water heather i need to buy
Answer:	More important than how big your home is would be how close is the tankless heater to your point of use and how cold is the incoming water? I live in Florida, so the water is never very cold which helps the heater to work very well for me. If your incoming water is colder than 55*F, I would recommend a bigger unit than the N120.
Question:	Is it Digtal
Answer:	The unit has 2 (Only) buttons that are in fact digital, those 2 buttons are the only controls you have to turn up or down the temperature, needless to say, the buttons are right on the control panel of the unit and the control panel of the unit, is what fails and makes this unit a very poor choice, since the "10 years guarantee" only covers leaks, and nothing else on this unit.

Product description

This Smart Technology electric tankless water heater is configured as a "whole home" model for climates where incoming water temperature is 67°F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67°F and an output setting of 105°F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with 60 amp double pole breaker connected to set of #6 awg wire. Plumbing connections are 1/2" compression fitting with the option of 1/2" NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.



NOTE : 11Kw at 220 is equal to 13kw at 240. .Activation Flow : 0.3 GPM

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

• Lifetime warranty
• Save up to 60-percent on your water heating cost with an ECOSMART electric tankless water heater
• Never run out of hot water with an ECOSMART tankless water heater
• Patented Self Modulating Technology and design
• ECOSMART tankless water heaters are 99.8-percent energy efficient.Uniform Energy Factor:0.98

User questions & answers

Question:	Ours has only been in service for less than a year - will not adjust temperature to anything above 85 Deg. F. What do you think is the problem ? kds
Answer:	My only guess is that the rheostat (variable resistor) that the temperature adjustment knob is attached to may be faulty. If that isn't it then I don't know. Sorry.
Question:	The warrenty says that this unit must be installed by a licensed electrician and plumber, for them to honor the "life time warrenty." why
Answer:	Hello Bob, The reason is the same as why an innumerable number of gadgets around the world have that little "warranty void if removed" label. Because getting inside of one requires a certain level of training and expertise. Same with this unit. GadgetsGo is an authorized Ecosmart dealer. Kind regards,HenryGadgetsGo
Question:	My house is wired 110V. What additional items do I need to purchase for the conversion
Answer:	Just to expand slightly on prior answers, normally a residential service feed is 240 volts between the two incoming hot legs. There is also a neutral leg, which (hopefully) has zero potential with reference to ground. The voltage between either one of the hot legs and the neutral leg is 120 volts. The 120 volt circuits in your house are connected to one or the other of the two hot legs, and only one. An attempt is made to assign circuits to the two hot legs in a way that will roughly balance the load between them. The other side of a 120 volt circuit is connected to the neutral leg. There is additionally a safety ground run with the circuit, which also ties into the panel. Certain devices require more power (work product of current and voltage) than is practical to deliver using a 120 volt circuit. Common examples are your clothes dryer, and your electric stove. These devices are powered by both hot legs, with a difference in potential of 240 volts. This water heater is also such a device.STRONG BUT FRIENDLY WARNING: If you did not already know this, please don't make wiring this water heater your learning opportunity with electricity. Hire someone who knows how to do it right. Cutting corners, especially with higher currents and voltages, can lead to equipment damage, fire, and electrocution. Electricity is not magic, and you can certainly learn how to do many common wiring tasks safely on your own, but today is not the day to begin that journey. You need properly sized components, properly installed, and connected to an adequate service. Also, if you really, really foul up, you could conceivably wind up making that morning shower more energizing than you ever imagined, if you get what I mean. So newly aspiring electricians should go fix their grandmother's favorite table lamp instead. Once they have that working they can use it to to start reading books about electricity, residential wiring, and eventually, books about this stuff: http://amazon.com/s/ref=nb_sb_ss_c_0_8?url=search-alias%3Dstripbooks&field-keywords=nec+code&sprefix=nec+code%2Caps%2C164 . Of course, you still have to know not to nick conductors when you strip them, and other trade craft like that ; ) . Like almost everything in life that is fun, electricity will hurt you. Sort of like all those people you dated for a while, and then wished later you had never met.
Question:	what amp breaker is required
Answer:	The National Electrical Code requires conductors and overcurrent protection to be sized at 100% of the manufacturer's branch circuit recommendation for tankless electric water heaters. A 60 amp breaker is the same price as a 40 or 50, it is the wire that costs more. #6 AWG wire is required for a 60 amp circuit. If you undersize the wire it could overheat and catch fire. Protect your family and follow the manufacturer's sizing for this, or any other, electrical device. Your family's lives are worth the extra money. 

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature. Tankless electric water heaters are sized for maximum simultaneous use, not maximum fixtures in your home.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

Product description

The Titan N-120 is the most popular model for average size homes. This space saving water heater will provide “endless” hot water for your entire home, apartment and other locations. As the Titan only heats the water when it is needed your energy savings on hot water can be up to 60%! In many cases your energy savings in the first year will pay for your investment in a state of the art Titan Tankless Water Heater. The Titan N-120 will replace an entire conventional tank heater with no disruption to your comfort. Let’s not forget the endless hot water you will experience. You won’t have to worry about running out of hot water for your guests after repeated showers! The Titan is recommended for warmer climates where the incoming water temperature is above 65 degrees (F). In Keeping with the reliability and performance of our classic Titan-ATC Electronic Tankless Water Heater, we have developed the newer and more advanced TITAN-SCR2. The new TITAN-SCR2 Digital Tankless Water Heater incorporates new space age technology and features a faster and more accurate temperature sampling system, a manual resetable thermostat and a new air/water deferential analyzing system to prevent dry starts, (which is a key problem for other tankless systems.) By heating water only as it is needed the TITAN-SCR2 Digital Electronic Tankless Water Heater eliminates the need for bulky water heaters that heat water continuously. This can reduce hot water costs up to 60% over conventional electric water heaters. The TITAN-SCR2's high efficiency is in part due to its dedicated digital microprocessor that samples input and output temperatures 21 times per second. This power control system analyzes the data and manages power usage for maximum efficiency and temperature stability. At rest, the TITAN-SCR2 uses no power at all.

• Endless Hot Water
• Space Savings
• Energy Saving, UL compliant & ETL Lead Free Certified
• 29 years in the business
• Patented Design Assembly

User questions & answers

Question:	Amperage draw and recommended breaker size
Answer:	According to the specs. It draws 54 amps, so a 60 amp breaker is required.
Question:	how many gpn
Answer:	Specifications Compliance UL-#499 Listing E212386 Tested MET Laboratories Dade Approval # 97-0627.16 NSF/ANSI-372 Certified ETL Laboratories Dimensions 7" W x 10" H x 2-3/4 D Weight 8 Pounds Materials Brass and Copper Casing Pipe Fitting 1/2" Standard Pipe Pressure Requirements 5 PSI-Min./150 PSI-Max Voltage 220 VAC Std.(208/277 Avail.) Elements Dual Copper/Nichrome Energy Efficiency 99.5% Activation 0.4 GPM-on/).3 GPM-off Indicators Red-on/Green-stand by Warranty 10 years on casing leakage, 1 year on components Protection Digital Temperature Control - Manual Resetable Thermostat
Question:	Will this unit work for 1 shower
Answer:	hi, this unit work 1 up 2 shower
Question:	Are these brand new with warranty and all
Answer:	Yes brand new 10 Year warranty .

Product description

This electric tankless water heater is a true Point of Use Model because it is specifically designed for under the sink, single applications with a maximum flow rate of 0.5-Gallon per minute (gpm) and includes a 0.5 gpm sink aerator. This heater is flow controlled, meaning the temperature will adjust according to flow rate. It is the smallest sized Ecosmart electric tankless model and should not be used to run anything more than one sink at a time or used in areas where inlet water temperature is lower than 57°F. At this inlet temperature the ECO POU 3.5 can heat 0.5 gallons per minute to 105°F. Its compact size allows for under the sink installations. The Point of Use models are ideal for: Wet Bars, Strip Malls, Doctor's Office, Boats, Recreational Vehicles (RVs), Bathroom Sinks. When sized properly this water heater will provide endless hot water. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The Eco POU 3.5 requires a minimum 100 amp electrical panel for installation with 30 amp single pole breaker connected to #10 awg wire. Plumbing connections are 1/2" NPT. For additional assistance please feel free to contact our support center at 877-474-6473. TROUBLE SHOOTING STEP: When the water is not hot enough, please slow down the flow of water to increase temperature!

From the Manufacturer

This electric tankless water heater is a true Point of Use Model because it is specifically designed for under the sink, single applications with a maximum flow rate of 0.5-Gallon per minute (gpm) and includes a 0.5 gpm sink aerator. Its compact size allows for under the sink installations. The Point of Use models are ideal for: Wet Bars, Strip Malls, Doctor's Office, Boats, Recreational Vehicles (RVs), Bathroom Sinks. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

• Can provide hot water for one sink at 0.5 GPM in warmer climates
• Requires 1 x 30 amp breaker and 10 AWG wire
• For one sink at 0.5 GPM in colder climates the POU 6 is recommended
• Amperage Draw 29 amp. kW - 3.5 kW
• Connection Fittings 1/2" NPT

User questions & answers

Question:	Can the flow rate be adjusted up from 0.5gpm to say 1gpm or 1.5gpm (understood that the output water will be corresponding less hotter)? thanks in adv
Answer:	This is a 199,000 btu model, a 3/4" gas line is required to have sufficient gas supply.
Question:	degree water going in what degree will be at the tap
Answer:	rinnai recommends the GTK03 Grundfos kit for this unit
Question:	are any of these tankless water heaters plug in
Answer:	I think, you need buy a WiFi module, call Rennai and ask. Circ-logic did not work for me, I had to install re circulation pipe. Because of the high minimum flow requirements, this unit did not work with any regular re circulation pump, so wasted money buying a Watts pump. And paid double for the labor. Rennai told me that I should have bought their thankless heater with re-circulation built in.
Question:	Would you recommend this model for a shower in a guest bathroom
Answer:	IT CAME WITH ADAPTERS ON THE TOP. NO PIPING.

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: This product is fixed flow, which means that the output temperature rise of this product is determined by flow rate of the application. This chart gives you the expected temperature rise for various sink flow rates from 0.5 to 1.5 gallons per minute.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

Product description

The Ariston Andris 4 Gal. 6-Year Corded 120-Volt Point of Use Mini-Tank Electric Water Heater has a mini tank that eliminates the long trip through pipes that water usually has to take from the water heater to the sink. This powerful, yet compact water heaters purpose is to provide you with hot water, when and where you need it. Installation has never been easier, with a simple tap into a cold water line and a standard 120-Volt outlet. The mini tank is perfect for smaller properties including, in- law suites, kitchenettes, pool houses, garages and can even be used for commercial applications like stores, offices and bathrooms. Created with versatility in mind, the mini tank can be wall mounted with the brackets provided or placed on the floor to fit your desired space. This highly efficient water heater boasts environmentally safe foam insulation and also comes with a durable titanium glass lined tank backed by a 6-year limited warranty.

• EASILY ACCESSIBLE HOT WATER: Compact designed 4 gallon mini tank. Provides instant hot water at point of use. 6-year limited warranty on tank, 2-year warranty on parts. Wall or floor mounted unit (wall brackets & rubber feet included).
• DO IT YOURSELF INSTALLATION: 1440-Watt heating element draws 12 Amp. 65°F-161°F temperature range. Easy installation thanks to a standard 120-Volt outlet.
• CAN FIT VIRTUALLY ANYWHERE: Dimensions (pipes included): 14.25"W x 14.25"H x 12.75"D; Water Connection: 1/2" NPT
• ELECTRICAL CONNECTION: Plug-in; Relief Valve: Factory Installed; Recommended Circuit Breaker Size: 15A
• QUALITY YOU CAN COUNT ON: TitanShield, exclusive technology that fully protects the tanks inner surface against corrosion. Robust environmentally safe foam insulation to increase energy efficiency. Eliminates the need for a recirculation line.

User questions & answers

Question:	Can this be mounted horizontal
Answer:	How long does it take to heat the water when turned on?
Question:	When we went to connect the water connector tube to the red ring hot water outlet it would not fit. There was a red tub in the outlet that prevented t
Answer:	Yes, you are correct, one of the units I installed had the same issue with the red plastic fitting liner protruding, and it cannot be pushed in or removed. I solved the problem by filing the plastic down to just above the metal pipe. Make sure to keep it level and remove burrs. Another fix would be to use standard pipe fittings such as putting a street ell on the tank nipple then connecting your flex hose to that - use brass or stainless fittings and pipe dope.
Question:	Has anyone used a t-valve to hook this to their toilet inlet line? I'd like to split the toilet line, install this, then attach my sprayer bidet
Answer:	Yes you can, but you know, you can buy a bidet with a water on demand heater built in it ! much better and you are not reheating 2.5 gals of water after each use. Check on Amazon or Wish for a bidet, it is not expensive .
Question:	Does it need its own breaker
Answer:	Yes and no, it depends on where you are robbing the power from ,if it is from a circuit with very little use like bath wall outlets only ( like I did ) I would say no ,but if its from a circuit with heavy use, I would say yes, also what are you going to use the hot water for ? in my case, I use mine at the wash basin only so it is not heating continuously. .

Product features

ANDRIS RS 4 GALLON ELECTRIC MINI TANK WATER HEATER

SINGLE FAUCET UNIT

• Remote locations
• Single water line
• Wall or floor mounted
• Eliminates the need for a recirculation line
• Easy Installation

BOOSTER UNIT

• Improve existing capacity
• No waiting time
• Load reduction
• Eliminates the need for a recirculation line
• Built-In redundancy

SINGLE FAUCET OR BOOSTER UNIT IN A WATER HEATING SYSTEM

This compact yet powerful hot water heater supplies instant hot water to even the most remote locations:

• Smaller/Second properties
• In-Law suites, Kitchenettes
• Sinks located far from water heater: Pool House/Garages
• Supplemental hot water for high-flow fixtures
• Commercial bathroom sinks

Product description

This Smart Technology electric tankless water heater is configured as a "whole home" model for climates where incoming water temperature is 62°F and above. The ECO 18 is capable of heating over 2.5 gallons per minute, which is the equivalent of one water saver shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 62°F, and an output setting of 105° F. Two showers emitting no more than 1.5 gpm each can be run simultaneously when incoming water temperature is above 70° F. Digital temperature control allows you to set your temperature in increments of 1°. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. However, when sized properly it will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 18 requires a minimum 150 amp electrical panel for installation with 40 amp double pole breakers connected to sets of #8 awg wire. Plumbing connections are 3/4" NPT. For additional assistance please feel free to contact our support center at 877-474-6473.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 62 Degree F and above. The ECO 18 is capable of heating over 2.5-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 62 Degree F. Two showers can be run simultaneously when incoming water temperature is above 70 Degree F in warmer climates such as South Texas, South Florida, New Mexico, Arizona and South California. These models come with a digital temperature control that allows you to set your temperature in increments of 1 Degree. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

• The product is highly durable
• The product is easy to use
• Manufactured in China
• Copper and stainless components
• Lifetime warranty for residential use
• Save up to 60% on your water heating costs with the most advanced, self modulating technology available
• Never run out of hot water with an ECOSMART tankless water heater.

User questions & answers

Question:	How do know which size to buy? We will supply two bathrooms, dish washer, clothes washer. What size should I choose
Answer:	I noted someone below stating they got the largest one and they can only run one water source at a time. My guess is they installed it wrong by not getting the electric hooked up right, or maybe the unit was just defective, or they live in Alaska. I went under size with an Eco 27 a few years ago because that’s all my electric panel could handle. We have zero issues in the summer. During winter months we can only run one shower at a time and have to slowly fill a tub (maybe 3/4 fill speed). To save as much money as I am on electric bill and have unlimited shower lengths (only 1 person at a time mid-Dec to mid-March) is totally worth it. On here today because I’m thinking of upping my panel size so was thinking of going with a larger one now. Regardless, CCRC’s experience with the largest unit not working is nothing like the experience I’ve had, and again I intentionally undersized mine for the house. The website has a clear chart to explain size you need based on number of water fixtures in your home and ground water temperature.
Question:	Can this unit supply a 3,700 sq foot home with 3 1/2 baths
Answer:	In the lower states it can, but in the northern states, multiple simultaneous users, it will be overloaded. If you can afford a 3,700 square foot home, then you can place a unit in each appropriate demand zone and be very glad you did. I love mine, live in KY, get great supply when the water is above 60 degrees, and then it slows the flow as the temperature drops. I have dishwasher, washing machine, garden tube, 2 showers, 3 sinks and 4 people. It is better than great in the summer, okay spring and fall, and we are conservative in the winter.
Question:	What is the power consumption of this tank-less heater
Answer:	The instantaneous power consumption while the hot water is running is quite high (up to 18kW or 27kW depending on which model you’re looking at on this page). However, when no hot water is being used, the power consumption is 0 (or a minuscule amount to run an LED light or something). The total power consumption over the course of several days or longer should be much lower than a tank heater but the short term power usage while the heater is making hot water will be much higher than a tank heater. It’s just that the unit sits idle most of the time while a tank heater will use power fairly frequently even when no hot water is needed as the water in the tank cools off over time and needs to be re-heater fairly constantly
Question:	remote
Answer:	This unit does not have the ability to have a remote temperature control.

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature. Tankless electric water heaters are sized for maximum simultaneous use, not maximum fixtures in your home.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

Product description

The new Titan-N-120 SS patented digital control system technology. Among all these feature the New Titan-SCR2 Series also features a new outlet temperature display feature that allows you to see and control the units outlet temperature. Also the new N-120 SS comes with a 2 year parts / 10 year leakage warranty. On Demand Water Heater One way to save on domestic hot water bills is to use (DEMAND TYPE WATER HEATER). A conventional hot water system heats water in a tank to a specified temperature. As heat is lost from the tank, the water is reheated until it reaches the specified temperature again. For most of the day the water in the tank is not used, but it loses heat continually. DEMAND WATER HEATERS Eliminate this problem by heating water only as hot water is drawn. Facts: A 30 or 40 gallon hot water Heater Tank will supply only enough hot water for one or two showers before running out of hot water! Not with Titan Electronic Tankless Water Heater! Can be installed under sink or any small space. Inline water filter can be installed separate. The Whole Home solution for Hot water without the use of a Big Tank. No more Point of Use water heaters for just one undersink, heat your entire homes water Instantly and ondemand and waterless tank storage needed. Calentador de Aqua certificado ETL, UL y Miami Dade Aprovado. La mejor option en Calentadora de Aqua por su casa.

• Uses: Whole House -Apartments - Condominiums - Kitchen - Bathroom - Beauty Salons - Hospitals - Boats - Pool - Dishwasher - Bath - Bathtub - Camping - Laboratories - Camper - RV - Offices - Schools - Cottages - Restaurants - Barber Shops - Warehouses - Shower - Washing Machine - Commercial and Industrial applications or anywhere hot waterheater is needed.
• Hot Water Energy Conservation: Heating water accounts for up to 25% of the average household energy. A leak of one drip per second can cost you $1.00 per month, 2 drips $2.00 and so on... Installing aerators in faucets and low flow showerhead can save a significant amount of hot water. On Demand Hot Water.
• The TITAN-SCR2 Tankless Water Heater comes with a 10 year warranty on all water-carrying components and all other parts are warrantied for one year. Installation is quick and easy to service, requiring no venting and the TITAN-SCR2 compact size allows installation almost anywhere. The TITAN-SCR2 is without a doubt the Tankless Water Heater for the 21st century.
• Available in seven models, the TITAN-SCR2 is ideal for a wide range of application. One TITAN-SCR2 unit can supply the hot water needs of home and apartments, and in some applications, energy saving can pay back unit cost in less than one year.
• This power control system analyzes the data and manages power usage for maximum efficiency and temperature stability. At rest, the TITAN-SCR2 uses no power at all. Max Flow of 4 GPM Gallons per minute Down to 24 Degree capacity.

User questions & answers

Question:

How many watts is the heater

Answer:

220 volts at 54 amps is 11,800 watts .. requires a 60 amp breaker and 6 gauge wire.. Niagra make this type of heater in a number of different sizes .. we have 2 of these heaters and I like the output temperature display .. that makes it easier to adjust .. this unit replace an earlier model that was in service for around 10 years.. look at their web site for more technical info and installation instructions .. they do not sell direct and I have found the best deals on Amazon ..

Product description

This Smart Technology electric tankless water heaters is configured for climates where incoming water temperature can reach as low as 37 Degree. The ECO 24 is capable of heating nearly 3-Gallon per minute at this temperature. This model is well suited for homes in the Northern U.S. and Canada and in the southern U.S. that have large Roman-style or Jacuzzi tubs and that have generally more demanding water usage needs. Digital temperature control allows you to set your temperature in increments of 1 Degree. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

From the Manufacturer

This Smart Technology electric tankless water heaters is configured for climates where incoming water temperature can reach as low as 37 Degree. The ECO 24 is capable of heating nearly 3-Gallon per minute at this temperature. This model is well suited for homes in the Northern U.S. and Canada and in the southern U.S. that have large Roman-style or Jacuzzi tubs and that have generally more demanding water usage needs. Digital temperature control allows you to set your temperature in increments of 1 Degree. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

• Lifetime warranty
• Save up to 60-percent on your water heating cost with an ECOSMART electric tankless water heater
• Never run out of hot water with an ECOSMART tankless water heater
• Patented Self Modulating Technology and design.Activation flow 0.3 GPM
• ECOSMART tankless water heaters are 99.8-percent energy efficient
• 100 A

User questions & answers

Question:	I understand this unit, the ECO 24, requires 3 - 220 (double) breakers. What amperage for each
Answer:	40 amp 240v breakers (2 pole breakers)
Question:	Will this Eco 24 system work with a dedicated 100A sub-panel off a 200A service panel
Answer:	I'm not an electrician, but in your situation, all the power is coming from the main service panel. You should consult with an electrician to calculate your maximum load. I've had no issues with my Eco 24 running 3-40 amp breakers off a 200 amp service panel. If you have a heat pump you could be pushing the limit at certain times. Be safe, consult an electrician.
Question:	will this work to fill up small jacuzzi
Answer:	Hello Oscar. This unit is not intended for a Jacuzzi due to the flow rate that the Jacuzzi requires. Instead, Ecosmart manufactures a product specifically for this. It is the Smart SPA and we have it for sale on our Amazon store. GadgetsGo is an Authorized Ecosmart Dealer.Kind Regards,Ross GadgetsGo
Question:	i have 6 bathrooms, 2 laundry rooms will one do the job? or i need two
Answer:	Hello Raz,Thank you for your question. I am replying in less than one hour, after business hours, to expedite your request.Actually it does not matter how many bathrooms your home has. What matters is how many points of use that you will use at the same time. So to determine whether this or any tankless heater will work, just add up the total water flow rate in gallons per minute ("GPM") of all your points of use. A shower flow rate can range from 1.5 to 2.5 GPM. A bathroom sink: 0.75 GPM. A clothes washer: 3 to 4 GPM.So, if you expect only to have one shower and one sink running at the same time, this will give you at least 105F hot water, if your incoming cold water temp is above about 55F.Please let me know if I can assist you further.Kind Regards,Ross KelsonGadgetsGoP.S. If you have found my answer helpful, please prefer us when you purchase. You will continue to get priceless service after the sale.

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature. Tankless electric water heaters are sized for maximum simultaneous use, not maximum fixtures in your home.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

Product description

Get hot water where it's needed, when it's needed with the Bosch ES4 Tronic 3000 T Electric water heater. This 2.5-gallon capacity point-of-use mini-tank fits right under your sink and provides a practical and effective solution to your hot water needs. This smaller model can be plugged right into a 120-volt outlet with the 36-37" cord, or can be installed in-line with a larger hot water source to provide "on-demand" use. The glass-lined tank offers great insulation and added durability, while the heater's fast recovery rate eliminates long waits for hot water. An external dial allows you to easily control the temperature range, and the temperature-and-pressure relief valve enhances your safety. The ES4 Tronic 3000 T from Bosch has a sleek and attractive exterior design that blends in seamlessly with existing decor when installed in a visible location, making this heater a great option in any room.

Manufacturer Contact Information

800-283-3787

• CONVENIENT HOT WATER HEATER: 2.5 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 13.75 W x 13.75 H x 10.75 D Inches
• LONG LASTING QUALITY: This electric water heater is easy to maintain and has premium glass-lined material for a long service life. (Amps 12A, Volts (VAC) 120)
• INDEPENDENT INSTALLATION: 36-37" cord plugs into a 120 volt outlet for independent installation or in-line with a large hot water source
• FAST RECOVERY RATE: Eliminates long waits for hot water at your sink, get on demand hot water at your every need (supplies up to 2 sinks at a time)
• EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included); simply tap into the cold water line and install the water heater directly at the sink to provide hot water

User questions & answers

Question:	Is it necessary to connect an expansion tank to this heater (for safety purposes)? It states something to that effect in the user manual
Answer:	The expansion tank for this heater is not required. Most people already have these installed in their homes but if not then it would be Ok without it as there is a pressure relief valve on top if something happened. GlobalTowne is an authorized Bosch distributor.
Question:	would this be able to supply a shower
Answer:	A standard flow shower head is around 2.5 gallons per minute. A low flow head is around 1.5 gallons per minute. The recovery rate for a 90 degree temperature rise is 6.8 gallons per hour! So even the 7.5 gallon unit would only provide 4 minutes of shower time before the temp dropped off dramatically. (even at the low flow rate..)
Question:	Can be used "in-line with a large hot water source"? Would it help a large bathtub that runs out of hot water before it gets full from main tank
Answer:	If your bathtub is bigger than your main heater tank, this unit isn't going to do much for you. It will add 2.5, 4, or 7 gallons to the capacity of your main tank, depending on which Bosch unit you buy. The 7 gallon unit requires a specially wired circuit. You will also get a little bit of lukewarm water that was in the line between your main heater and the Bosch unit. Unless your main tank is awfully small and your bathtub massive, the 4 gallon unit should work for you. Maybe a demand type thankless heater in your bathtub hot water feed would be a better choice, but be careful to size it properly for your desired flow rate and temperature rise. Also a tankless is likely to require special wiring.
Question:	When this heater is connected to the hot water line, what happens with the cold water that was sitting in the pipes
Answer:	When the tap is opened, the hot water in the unit flows out. The colder water that was sitting upstream of the unit, enters the unit to be heated. If the tap remains open, the newly heated water flows out, being replaced eventually, (depending on the distance to the main water heater), with the water from the main water heater. You will probably set the unit temperature to equal the main water heater temperature, if you want to keep a constant temperature, but other scenarios are possible.

Product features

Bosch ThermoTechnology

The Bosch Tronic 3000 T point-of-use electric mini-tanks are available in three compact sizes, which can be wall-hung (bracket included) or floor-mounted. They fit easily under a sink, even in a cabinet space, and because they have a sleek and attractive design, they blend in seamlessly with existing decor when installed in a visible location. Simply tap into the cold water line and install the water heater directly at the sink to provide hot water. Great for a wide range of locations!

Water Where You Need It

Provides hot water quickly at point of use and comes with temperature /pressure relief valve installed - 2.5 and 4 gallon tanks feature a simple 120 VAc plug-in connection (1440 watts).

Quality for Long-Life

Thick CFC-free foam insulation for maximum energy efficiency, glass-lined tank for durability.

Great for Small Spaces

Water heaters are compact and lightweight and can be floor, shelf, or wall mounted (except 7 Gallon) - features a sleek and attractive design to blend seamlessly with decor.

Minimize Wait Time for Hot Water

Waiting for hot water at a sink located far from a primary heating source can be frustrating. Only having access to cold water from a sink is just not useful, and plumbing a hot water line to every sink in a home or business requires time and money. To get hot water where it’s needed, when it’s needed, a better solution is to use the Tronic 3000 T from Bosch: a point-of-use electric mini-tank heater. This heater can supplement a primary water heating source, or be used under a single sink. In fact, the Bosch Tronic 3000 T can be used for three different applications: as a sole water heating source for a single sink, as a supplement to an existing heater located far from the sink, and as a buffer installed in-line with tankless water heaters that experience intermittent cold water, also known as 'cold water sandwiching'. No matter the configuration, there’s minimal stand-by loss from this premium mini-tank water heater.

Product description

FEATURES

Instant hot water comes with powerful 5.5kW heating element, expect hot water for 3 seconds, perfect choice for sinks to provide endless hot water any time.

ENERGY SAVING

This tankless water heater avoids standby heat loss of those bulky storage water heaters, minimize energy waste and achieve 65% energy saving with help of its smart self adjustment technology.

HEALTHY WATER QUALITY

Traditional bulky water tanks store water for long time, causing bacterial growth and rust issue, time to get clean water via a tankless hot water heater. The ECOTOUCH unit separates water and electricity line so as to avoid issue of calcium deposits.

MULTIPLE SAFETY PROTECTIONS

Over temperature protection

Dry heating protection

Leakage protection

Water and electricity line separated

EASY INSTALLATION

Real compact design, water heater cooridates with scenes decor, above sink or under sink water heater, horizontally, vertically or obliquely installation. Comes with easy installation brackets, pipe fitting of 1/2" NPT and 10AWG power cord(fixed to the unit) so you don't to have to hire a plumber even if you can do it.

SPECIFICATIONS

Power: 5.5kW

Voltage: 240V~60Hz

Min. water flow to activate the unit: 0.475GMP

Max tempt rise from 67°F to 109°F @ 1.2GPM

Max. Amperage: 23A

Recommended wire size: 10AWG

Required circuit breaker : 1x 2-Pole 30 AMP

KINDLY NOTE

1.The unit is mainly for sinks, not for shower purpose.

2.The tankless water heater should be installed professionally.

3.Please read instruction manual carefully prior to installation and use!

PACKAGE INCLUDES

1X ECOTOUCH 5.5kW instant water heater

1X Instruction manual

1X Installation accessories

1X Remote control(for Black model)

• 【INSTANT & SUFFICIENT HOT WATER】Applied with 5.5KW heating system, the electric water heater supplies instant, consistent and endless hot water of 116℉or higher temp shortly, no waiting for preheat nor terrible temp up & down, perfect companion for sinks. Time to get rid of those "lukewarm" toys.
• 【SMART SELF ADJUSTMENT】The hot water heater adjusts power input based on flow rate and temp setting in real time. For example, less power will be applied by the system when waterflow reduced, thus you still get ideal temperature instead of scalding hot water, which means comfortable experience. Optimal energy efficiency of 98% saves considerable electric charge.
• 【CONVENIENT USE】The tankless water heater comes with digital display & touch control panel so temp setting is easy job. Now turn on the tap and let the smart unit do the rest, you needn’t go through hard lesson about temp setting by a mixer tap without any hint. The Black model comes with Remote control, useful for installation under sink.
• 【SAFE and DURABLE】Applied with multiple protection devices, every piece goes through strict tests to ensure 100% safe. Inner water and electricity lines are designed to run separately so as to avoid leakage or harm of scale build up. Approval by ETL and qualifies for UL, you can expect outstanding performance for years to come.
• 【POINT of USE】The sleek tankless water heater is compact as an oatmeal box, making it possible to install anywhere close to outlet and avoid energy waste. It can be mounted horizontally, vertically, obliquely, ideal for kitchen, bar, school, hospital, community and hair salon. Please verify it is the right size for you: 5.5kW@240V; dimensions 11" x 7.5" x 2.35"; pipes fittings :1/2" NPT.

User questions & answers

Question:	Unit needs to be reset if power goes out, is this normal? I have to get a ladder out to reset
Answer:	Dear valued customer, Thanks for your trust in ECOTOUCH tankless water heater electric. We would like to clarify that ECOTOUCH tankless water heater turns on automatically when it detects water flow rate . When not in use, the tankless water heater goes into standby mode. If you get any question,please fell free to contact and we will do best to serve and assist. Wish you pleasant day! Best regards Vivian from ECOTOUCH
Question:	Can I take my shower with it
Answer:	Thanks for your message and we are deeply sorry for all the inconvenience that has caused. We fully understand the ECO55 unit does not get sufficient hot water for the shower purpose. If you need to use this water heater for shower, we would like to suggest you that you need to purchase a ECO90 water heater and then install them inline, under this condition, they will serve as a 14.5kW tankless water heater system, sufficient for shower purpose or 2 faucets at the same time. If you need any further assistance,please fell free to contact us and we will do best to serve and help. Rest assured, you will not suffer any loss from dealing with us, because we are a trustworthy company that will stand behind our products always. Wish you pleasant shopping! Best regards. Vivian from ECOTOUCH
Question:	Can this unit be used on a boat? I have a small 27' foot sailboat I would like to replace the older water heater
Answer:	If you have 220 volts on you boat
Question:	What type of fitting fits the intake side? It has a gasket that came with it. This side has a restrictor inside it it and needs somehting flush
Answer:	Dear Customer, Thanks for your trust in ECOTOUCH tankless water heater. You needn't consider about the filter inside the inlet pipe. Pipe connection is the same for both sides. Please use the leak-proof gaskets before you do pipe connection and connect the unit to hose with 1/2NPT connector. If the water quality in this district is not good, so the water must be purified with filter device. And we would like recommend the inlet side can be disconnected, flush to clean the filter periodically. If you have any other question during installation, please feel free contact us via [email protected] any time, we will do our best to help. Wish you pleasant shopping. Vicky from ECOTOUCH

Product features

Electric Tankless Water Heater For Sinks

Being one of those limited choices with smart modulation heating, ECOTOUCH tankless water heater provides instant & endless hot water with optimal thermal efficiency of 98% and minimum energy cost. Thus, the tankless water heater heats up 1.2GPM water from 67℉ to 109℉, which out runs most point use water heaters and will sure cut your electric bill.

Designed with compact size, it is one of perfect solutions for Kitchen & Bathroom Sinks, Wet Bars, Strip Malls, Doctor's Office.

Instant hot water and endless

As soon as you turn it on, hot water comes out immediately with desired temperature and sufficient flow rate of 1-1.5 gallon per minute, no waiting for preheat or standby energy loss. The best part is you get endless hot water now, 24h service, anytime you need. Perfect for sinks.

More hygiene

No storage in bulky water tank for long time heating, avoids bacterial growth and rusting issue that do great harm to water quality. Besides, water pipe and electricity heating are designed to run independently so as to avoid scale build up, now you get steady stream of clean and fresh hot water.

Smart modulation and energy saving

Equipped with a smart modulating control for stable temp, the hot water heater adjusts exact power input according to power calculation based on flow rate and temp setting in real time, which means you get still stable temp, instead of scalding hot, when you reduce flow rate. Optimal energy efficiency is promised.

Sleek & compact design

360 degree installation, lightweight design and compact as an oatmeal box, the tankless hot water heater is capable of and being located near by. It features a sleek and attractive design to blend seamlessly with decor.

Product description

Features Two Models in One: Switchable between 9,000 and 12,000 Watts via a jumper during installation.

From the Manufacturer

Features Two Models in One: Switchable between 9,000 and 12,000 Watts via a jumper during installation

• Set the knob on the front cover and enjoy water temperatures between 86DegreeF (30DegreeC) and 125DegreeF (52DegreeC)
• The three years parts warranty is unique in the industry
• Due to its small dimensions and attractive housing the DHC-E can be left unconcealed in many applications

User questions & answers

Question:	The Item Weight is 50 pounds
Answer:	Out of box, no stamping, thus don’t know
Question:	The description says this unit is swicthable between7.2 kw and 9.6kw, can it be set at 8kw? much obliged
Answer:	Yes it does. About 4 feet with connectors and Teflon tape.
Question:	Is 6# gauge wire thick enough for 9.6KW setting
Answer:	Hello Tulsa, Thanks for reaching out. Please be noted the max. working pressure for this reel is 300psi.
Question:	does the dhc-6 unit self drain/how do you drain for the winter
Answer:	Instructions say not to open casing but it can be opened

Product features

Simple, Reliable Hot Water Right at the Sink: DHC

DHC can deliver warm or hot water to a single point-of-use, usually a hand wash or utility sink. Please view the Sizing Guide images above in the image detail view for more information.

The heating element is controlled by a flow switch which means a DHC can never dry-fire and fail prematurely. And since all DHCs are hydraulically controlled, operation is quiet. DHC water heaters are equipped with a safety high-limit with manual reset. The rugged all copper design ensures many years of reliable service.

The simplicity and reliability of the Stiebel Eltron DHC tankless water heaters make them ideal point-of-use water heaters for these residential applications:

• Bathroom Sinks
• Kitchen Sinks
• Utility Sinks
• Laundry Areas
• Boats / RVs

And they are ideal for restrooms or kitchenettes in these office or commercial / industrial settings:

• Office Buildings
• Gas Stations
• Stores
• Schools
• Malls
• Hotels / Motels
• Warehouses
• Commercial Condominiums
• Restaurants
• Manufacturing Facilities

Electronic Accuracy: DHC-E

DHC-E can deliver hot water to a single sink, multiple sinks, or in certain conditions, low-flow showerheads. Please view the Sizing Guide images above in the image detail view for more information.

Control temperature simply by setting a dial

Set the temperature knob on the front cover, and enjoy water between 86–140 °F (30–60 °C). Change the desired temperature at any time. Advanced microprocessor technology ensures that the water temperature doesn't deviate from the set point even if flow varies.

Sleek Design & Constant Temperature Output

DHC-E models have our exclusive Electronic Temperature Control. Stiebel Eltron Electronic Temperature Control compensates for fluctuations in the flow rate and the incoming water temperature to maintain a constant water temperature output. Our smart microprocessor technology continually monitors info from the flow sensor & two temperature sensors & micro-adjusts the heating elements, saving power.

Product description

120V - requires hard wiring. 1440W element. Magnesium anode rod. Rectangular shape with 2" of foam insulation. Glass lined tank for longer life. 6 year on heater and 1 year on parts for both commercial and residential use. Temperature/pressure relief valve included. Can be mounted both horizontally or vertically. Mounts on floor or wall. Meets ASHRAE 90. 1. See Info Page for technical and installation specifications.

Manufacturer Contact Information

800-283-3787

• CONVENIENT HOT WATER HEATER: 7 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 17.5 W x 17.5 H x 14.5 D Inches
• INSTALLED VERTICALLY OR HORIZONTALLY: This larger model can be mounted vertically (7 gal. of water supply) or horizontally (5.1 gal. of water supply)- vertical orientation is installed with the cold and hot lines on top of the unit
• RELIABLE WATER SOURCE: Easily hard-wire the 7-gallon model to provide the on-demand reliable water source your home or office needs
• IMPORTANT INFORMATION: Heating capacity of 1440 watts and a temperature range of 65-145°F max. Operating pressure-150 psi. Water fittings-3/4 inch Male NPT. Electrical requirements (Amp 12A/Volts 120)
• EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included for vertical orientation only); simply tap into the cold water line and install the water heater directly at the sink to provide hot water

User questions & answers

Question:	What is the recovery time if the 7 gallons of hot water is used
Answer:	I have the 4 gallon tank and it is not too bad for the reheat
Question:	Can I reduce the pipe's size from 3/4 in to 1/2 in without any negative effect on the unit
Answer:	No harm to unit.....Max water flow will be reduced a little.
Question:	Can i use this to replace a small rv hot water heater
Answer:	Yes, but realize that it's electric and draws quite a few amps, most rv water heaters are propane.
Question:	The Manual request for the ES8 a 20 Amp breaker and 12GA wire. The wattage however is 1440 with 12 Amps. Why then 20 Amp breaker and not
Answer:	I would use a 20 amp circuit with 12 ga wire but there are no inrush concerns with a resistive load. A heating element does not have a higher initial current draw like a motor. It draws 1440 watts or 12 amps at 120v. Since 14 ga wire must be fused for 15 amps, this device by itself is already at 80% of the circuit’s capacity.

Product features

Bosch ThermoTechnology

The Bosch Tronic 3000 T point-of-use electric mini-tanks are available in three compact sizes, which can be wall-hung (bracket included) or floor-mounted. They fit easily under a sink, even in a cabinet space, and because they have a sleek and attractive design, they blend in seamlessly with existing decor when installed in a visible location. Simply tap into the cold water line and install the water heater directly at the sink to provide hot water. Great for a wide range of locations!

Water Where You Need It

Provides hot water quickly at point of use and comes with temperature /pressure relief valve installed - 2.5 and 4 gallon tanks feature a simple 120 VAc plug-in connection (1440 watts).

Quality for Long-Life

Thick CFC-free foam insulation for maximum energy efficiency, glass-lined tank for durability.

Great for Small Spaces

Water heaters are compact and lightweight and can be floor, shelf, or wall mounted (except 7 Gallon) - features a sleek and attractive design to blend seamlessly with decor.

Minimize Wait Time for Hot Water

Waiting for hot water at a sink located far from a primary heating source can be frustrating. Only having access to cold water from a sink is just not useful, and plumbing a hot water line to every sink in a home or business requires time and money. To get hot water where it’s needed, when it’s needed, a better solution is to use the Tronic 3000 T from Bosch: a point-of-use electric mini-tank heater. This heater can supplement a primary water heating source, or be used under a single sink. In fact, the Bosch Tronic 3000 T can be used for three different applications: as a sole water heating source for a single sink, as a supplement to an existing heater located far from the sink, and as a buffer installed in-line with tankless water heaters that experience intermittent cold water, also known as 'cold water sandwiching'. No matter the configuration, there’s minimal stand-by loss from this premium mini-tank water heater.