12 best rinnai panel heaters

Product description

This Smart Technology electric tankless water heater is configured as a "whole home" model for climates where incoming water temperature is 67°F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67°F and an output setting of 105°F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with 60 amp double pole breaker connected to set of #6 awg wire. Plumbing connections are 1/2" compression fitting with the option of 1/2" NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.



NOTE : 11Kw at 220 is equal to 13kw at 240. .Activation Flow : 0.3 GPM

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

• Lifetime warranty
• Save up to 60-percent on your water heating cost with an ECOSMART electric tankless water heater
• Never run out of hot water with an ECOSMART tankless water heater
• Patented Self Modulating Technology and design
• ECOSMART tankless water heaters are 99.8-percent energy efficient.Uniform Energy Factor:0.98

User questions & answers

Question:	Ours has only been in service for less than a year - will not adjust temperature to anything above 85 Deg. F. What do you think is the problem ? kds
Answer:	My only guess is that the rheostat (variable resistor) that the temperature adjustment knob is attached to may be faulty. If that isn't it then I don't know. Sorry.
Question:	The warrenty says that this unit must be installed by a licensed electrician and plumber, for them to honor the "life time warrenty." why
Answer:	Hello Bob, The reason is the same as why an innumerable number of gadgets around the world have that little "warranty void if removed" label. Because getting inside of one requires a certain level of training and expertise. Same with this unit. GadgetsGo is an authorized Ecosmart dealer. Kind regards,HenryGadgetsGo
Question:	My house is wired 110V. What additional items do I need to purchase for the conversion
Answer:	Just to expand slightly on prior answers, normally a residential service feed is 240 volts between the two incoming hot legs. There is also a neutral leg, which (hopefully) has zero potential with reference to ground. The voltage between either one of the hot legs and the neutral leg is 120 volts. The 120 volt circuits in your house are connected to one or the other of the two hot legs, and only one. An attempt is made to assign circuits to the two hot legs in a way that will roughly balance the load between them. The other side of a 120 volt circuit is connected to the neutral leg. There is additionally a safety ground run with the circuit, which also ties into the panel. Certain devices require more power (work product of current and voltage) than is practical to deliver using a 120 volt circuit. Common examples are your clothes dryer, and your electric stove. These devices are powered by both hot legs, with a difference in potential of 240 volts. This water heater is also such a device.STRONG BUT FRIENDLY WARNING: If you did not already know this, please don't make wiring this water heater your learning opportunity with electricity. Hire someone who knows how to do it right. Cutting corners, especially with higher currents and voltages, can lead to equipment damage, fire, and electrocution. Electricity is not magic, and you can certainly learn how to do many common wiring tasks safely on your own, but today is not the day to begin that journey. You need properly sized components, properly installed, and connected to an adequate service. Also, if you really, really foul up, you could conceivably wind up making that morning shower more energizing than you ever imagined, if you get what I mean. So newly aspiring electricians should go fix their grandmother's favorite table lamp instead. Once they have that working they can use it to to start reading books about electricity, residential wiring, and eventually, books about this stuff: http://amazon.com/s/ref=nb_sb_ss_c_0_8?url=search-alias%3Dstripbooks&field-keywords=nec+code&sprefix=nec+code%2Caps%2C164 . Of course, you still have to know not to nick conductors when you strip them, and other trade craft like that ; ) . Like almost everything in life that is fun, electricity will hurt you. Sort of like all those people you dated for a while, and then wished later you had never met.
Question:	what amp breaker is required
Answer:	The National Electrical Code requires conductors and overcurrent protection to be sized at 100% of the manufacturer's branch circuit recommendation for tankless electric water heaters. A 60 amp breaker is the same price as a 40 or 50, it is the wire that costs more. #6 AWG wire is required for a 60 amp circuit. If you undersize the wire it could overheat and catch fire. Protect your family and follow the manufacturer's sizing for this, or any other, electrical device. Your family's lives are worth the extra money. 

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature. Tankless electric water heaters are sized for maximum simultaneous use, not maximum fixtures in your home.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

Product description

MAREY GA10LP Indoor Propane Gas Tankless Water Heater can provide up to 2. 7 Gal. per minute for a perfect shower at 115°F output water temperature. It is also called water heater on demand, because it heats water only when needed, saving energy. It is designed in the USA and it's perfect to supply endless hot water for up to 2 or 3 points of use simultaneously (for a variety of residential hot-water applications). Its compact design saves space and is easy to install: you will only need 2-D cell battery for the ignition and a venting (not included in the box). MAREY has been on the water heating business since 1955, bringing tradition and innovation together.

• Provide endless hot water on demand and only as needed
• Save up to 60% on electricity bills for water heating
• Compact design saves space and is easy to install almost anywhere
• No electrical connection is required so it's perfect alternative for those homes experiencing frequent power outages
• Unlimited hot water whenever is needed
• 5-year
• Allows water temperature to be controlled

User questions & answers

Question:	What size box does it ship in
Answer:	Hello. The 10L ships in a box that measures approximately 16 x 28 x 10 inches. GadgetsGo is an Authorized Marey Distributor. Kind Regards, John M. GadgetsGo
Question:	For gas heater what is the outside dimensions, high , wigth , depth. Is it 23.6x13.6x6.9 with the extaust cap on top. Thanks, Ray
Answer:	Hi Ray. The dimensions you gave are for the body of the heater only, not including the exhaust cap, since it is removable, and not including the water and gas connections at the bottom.Kind Regards,RossGadgetsGo
Question:	Does it need to be vented
Answer:	yes i have one in an outdoor shower and the other inside a bathhouse and we put a 90 degree turn on it to go out the side of the wall and works just perfect.
Question:	Does this come with exhaust/vent pipes
Answer:	Greetings, The Marey Gas 10L Tankless heater does not come with the Exhaust/Vent pipes. You will need to locate B-vent or Z-Vent Pipe material size pipe 4" online.

Product features

Marey 10L Gas Tankless Water Heater

This compact model saves space and allows easy installation just about anywhere. It heats unlimited volume of water as needed and permits you to regulate the water flow and gas flow to better temperature. So if you instant and on demand want hot water, this is the product for you!

It is also a perfect alternative for those homes experiencing frequent power outages since this heater does not require electricity. The 10L unit provides up to 3.1 Gallons Per Minute, to provide hot water for your home family at multiple points of use!

Easy to install!

Multiple Points of Use!

Enjoy many features! Check temperature map below for more information on simultaneous points of use on your region.

Save Energy!

It can last a lifetime, keeping 87% efficiency level!

We are in the market since 1955!

GA10LP

Avaliable in Propane Gas.

GA10NG

...or also Avaliable in Natural Gas! Make sure you select your preferred gas type before you purchase your model.

Product description

Configured for cold climates or high flow rates. Well suited where incoming water temperature can drop below 45 F. For use in more demanding water usage applications. Self modulating flow sensor technology regulates the amount of energy required to heat the water needed. Digital temperature display showing the outlet water temperature setting. Uses 9 KW standard Emerson electric heating elements with brass tops to prevent electrolysis. Copper heat exchanger. Automatic resettable thermostat. 40 DP breakers required. 112A draw. Required wire: 3 sets 8 AWG. Pipe fitting: 3/4'' NPT. Energy efficiency: 99.8%. UL and CSA certified.Weight: 11 lb. Lifetime warranty. It can provide between 2.7 and 6.5 gallons-per-minute depending on the inlet water temperature.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature can reach as low as 37 degrees. The ECO 27 is capable of heating nearly 3 gallons per minute at this temperature. The ECO 27 is the largest electric tankless water heater available with Patented Self Modulating Technology. This model is well-suited for homes in the northern U.S., Canada, and in the southern U.S. for large Roman-style or Jacuzzi tubs that generally have more demanding water usage needs. Digital temperature control allows you to set your temperature in increments of 1 degree. Prior to purchase and installation please verify that this model is the right size for your hot water needs and electrical requirements.

• Savings of up to 50% on water heating costs. Dimensions :17H x 17W x 3.625D inches ;Pipes fittings :3/4 inch NPT
• Digital temperature control in 1-degree increments allows control of hot water; Activation Flow: 0.3 GPM
• Copper and stainless components designed for efficiency, durability and easy replacement.
• Compact size saves valuable storage space, while the stylish and advanced design is pleasing to the eye and Copper and stainless components designed for efficiency, durability and easy replacement.
• Prior to purchase & installation, please verify that this model is the right size for your hot water needs and electrical requirements. Electrical requirements: 27 kW, 240 volts, 40 required breakers, 112.5 maximum power (AMP), 8 required wire.Amperage Draw:113 A
• Required Breaker Quantity: Three 40 Amp Double Pole
• Recommended Electrical Panel: 200 Amps

User questions & answers

Question:	How do know which size to buy? We will supply two bathrooms, dish washer, clothes washer. What size should I choose
Answer:	In order to have a 208 volt power you would need to be pulling off of 2 legs of a 3 phase service. Are you sure you have 3 phase?
Question:	Can this unit supply a 3,700 sq foot home with 3 1/2 baths
Answer:	Approx 7x11. The cover is approx 8x12
Question:	What is the power consumption of this tank-less heater
Answer:	This is a 240V/208V heater. At 240V this heater draws 6.25 amps.
Question:	remote
Answer:	Are you asking if it can be wired 208 volt? The answer is yes. I don't have any experience with model you are referring to otherwise.

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature. Tankless electric water heaters are sized for maximum simultaneous use, not maximum fixtures in your home.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

Product description

non-Condensing Tankless Water Heater

From the Manufacturer

Stop planning your mornings and evenings around your water heater. Set your own schedule, thanks to the R75LSi. Ideal for two- to three-bathroom homes, the R75LSi delivers up to 7.5 gallons of hot water per minute (GPM), while saving energy and money. Mount your compact R75LSi in virtually any room, and vent directly to the outside with a single wall or roof penetration.

• 10,300 - 180,000 BTU
• Comes standard with MC-91-1US Digital Controller with Error Code Indicator
• 82% Thermal Efficiency
• Residential Temperature Settings: 98°F - 140°F
• Commercial Temperature Settings: 98°F - 160°F (commercial controller must be purchased separately)

User questions & answers

Question:	does anyone have long periods of cold water when adjusting the water temp while showering
Answer:	Our brand new unit takes about 5 minutes to get hot water to the furthest room in the house and then I turn on my shower and then the sink water gets cold.
Question:	will there be enough water for 2 or even 3 people taking showers at once
Answer:	I live in eastern Massachusetts and this winter was exceptionally cold. This model was set at 120 degrees and easily provided hot water for 2 showers and the dishwasher at once. I am confident that it will handle 3 showers
Question:	Can we use the same vent which is used with the old water heater tank. Outside roof vent cover can be used same existing
Answer:	No. For this unit the exhaust is inside of a 2nd wall that is the fresh air intake Your old vent is also not big enough in diameter.
Question:	If I get a bit too tipsy and pass out in the shower and wake up six hours later will I still have hot and toasty water
Answer:	Yep. The water stays hot as long as you keep running water.

Product features

Endless Hot Water

Put an end to scheduling your hot water need.

• Never again choose between taking a piping hot shower, doing a load of laundry or running the dishwasher. A Rinnai Tankless Water Heater will never run out of hot water and leave you in the cold.

Hot Water On-Demand

Don't waste while you wait.

• Rinnai tankless water heaters with ThermaCirc360 technology recirculates hot water through your pipes to get you hot water fast.
• While you wait for hot water to travel from your old tank to your shower, you can waste the equivalent of twenty-four 16-ounce bottles of water every time. ─ that means an average of 8,700 bottles of water per person, per year.

Save Valuable Space

Your hot water heater doesn't have to be a behemoth!

• Compact design allows for installation in non-traditional spaces such as the attic, crawl space or even a closet.
• Save 16 sq. foot of space ─ the Rinnai tankless water heater is only the size of a small suitcase.

Affordable, Efficient Savings

Efficiency packaged in a compact design means cut CO2 emissions (as compared to tanks), use less energy and conserve water.

• Use 40% less energy than traditional tanks* because you heat water only when you need it.

100 years of Confidence

Get peace of mind with the unsurpassed quality and innovation of a Rinnai tankless water heater.

• Trust the #1 selling gas tankless water heating brand in North America for all of your water heating needs.
• Smart technological advancements such as WiFi monitoring, your trusted Rinnai service provider can monitor the efficiency of your tankless water heater and address issues before you ever experience a break in service.

Sustainable Reliability

It's a smart investment for now and the future when you intertwine sustainability and reliability.

• Every part of a Rinnai Tankless water heater is replicable so components can be easily swapped vs. buying a whole new system.
• Average life expectancy is 20 years vs. 8-10 for a traditional tank**
• With this premium product, you'll save–both money and worry–in the long run.

Product description

The ECO line by Marey is designed using SMART Technology. It is the only one in the market that does not accumulate sediments, as the water never touches the heating element! The 220V ECO110 by Marey provides 11kW of power, being the perfect solution for 1 point of use in Southern areas (a shower and a sink). This unit provides 28°F increase at 3. 0 GPM, allowing you to have a shower and a sink running simultaneously in hot climates. The 220V ECO110 reaches 56 °F at 1. 5GPM for hot water output at one point of use at time. In colder regions, the 220V ECO110 is suitable to provide hot water for a single point of use such as a sink. Marey´s 220V ECO110 is ETL approved. It performs best in the US Southern regions where the incoming water temperature is above 70°F. This unit must be installed no more than 40 feet from the intended point of use. The complete ECO line by Marey is designed with corrosion resistant heating elements which reduce hard water build up from chlorine and calcium.

• The 220V ECO 11kW unit is ideal for 1 simultaneous points of use in US Southern Regions where the incoming water temperature is above 70°F. In colder regions, it is suitable for a sink at 1. 3 GPM.
• German-designed with high quality stainless steel water channel and heating chamber.
• SMART Technology: Easy management and simple adjustments on a LCD Panel allows you to program the exact desired water temperature thereby optimizing electricity consumption.
• Requires 60 Amp breaker and must be installed by a professional plumber or electrician to ensure safety and quality.
• Marey’s ECO line can maintain 98% efficiency level throughout their lifetime.

User questions & answers

Question:	How to instal it
Answer:	Hello Domingo. Complete installation instructions are on the official manufacturer's owner's manual here https://gadgetsgo.com/images-manual/Marey-Eco110-2016_12_27_manual.pdf GadgetsGo is an Authorized Marey Distributor. Kind Regards, John M. GadgetsGo
Question:	What is the fitting for the pvc inlet and outlet
Answer:	Hi Judy. PVC should not be used for the hot water connection. Instead use copper, CPVC, or other high-temperature rated pipe. You may use PVC for the cold water connection. GadgetsGo is an Authorized Marey Distributor. Kind Regards, John M. GadgetsGo
Question:	can i use a double 25 amp *50 amps
Answer:	I think it takes a 60 amp
Question:	What size is the out put line
Answer:	Hello Cindy. Both water inlet and outlet connections are 1/2" NPT. Feel free to ask us any other questions. GadgetsGo is an Authorized Marey Distributor. Kind Regards, John M. GadgetsGo

Product description

Rinnai takes tankless water heating one step further with condensing technology that delivers more efficiency than ever before. Enjoy all the same tankless benefits you’ve come to expect from Rinnai, plus even greater energy savings. Features: 95% Thermal Efficiency Natural gas or propane Indoor Installation Only 98° F to 140° F Residential Temperature Range 98° F to 185° F Commercial Temperature Range Commercial Controller Must be Purchased Separately Gas Rate Input BTU's: 15,200 - 199,000 Electronic Ignition Meets California and Texas NOx Emissions Standards Compatible with Full Line of Rinnai Digital Controllers 12-Year Warranty on Heat Exchanger, 5 Year Parts, 1 Year Labor for Residential Installations Specifications: Width: 18.5" Height: 26" Depth: 10" Weight: 61.7 lbs Gas Connection: 3/4" Water Connection: 3/4"

• INDOOR installation only. Fuel Type: NATURAL GAS.
• Concentric or PVC venting option
• Up to 0.96 Energy Factor/Up to 0.92 Uniform Energy Factor
• The space-saving design allows Indoor Installation type
• Ultra low NOx emissions
• 199,000 max BTU

User questions & answers

Question:	When installing this with the Ubbink horizontal concentric kit is a condensate collector needed in addition to the 12 or 21" kit? Finding mixed result
Answer:	I would say yes as I understand it the concentric is just the air intake and exhaust you would have condensation either way. I have mine draining into a reservoir with a pump that pumps it to the drain. If you install withount it will just blow water on the ground and there's your answer.
Question:	What is the difference between the ruc98i and the ruc98in
Answer:	RUC98i is the basic model number. RUC98in incicates it is meant for natural gas applications. MyPlumbingStuff
Question:	Is an expansion tank necessary for the tankless WH
Answer:	No expansion tank was needed
Question:	is this comes with Isolation Valves and Pressure Relief Valve (included in the box
Answer:	Yes, this will come with everything need except venting. Rinnai is the only manufacturer to offer both concentric and twin-pipe PVC venting. No adaptor is necessary to give double the venting options on every installation. MyPlumbingStuff

Product description

The Eccotemp i12 Liquid Propane 3 GPM Tankless Water Heater has a new revolutionary design, making it unlike any other tankless water heater on the market today. The Eccotemp i12-LP is perfect for vacation cabins, cottages, and smaller homes. This model features sleek black tempered glass paneling, fully automatic temperature controls for precision, and a touch screen with an LED temperature display that shows output temperature and GPM flow. The i12-LP is also equipped with child locking technology. The Eccotemp i12-LP is a liquid propane powered, indoor model designed for small to medium hot water production where you need more than one hot water application at the same time. This model also offers a 35-40 degree Fahrenheit temperature rise when operating at a flow rate of 4 GPM and a 77-degree Fahrenheit temperature rise at 1.5 GPM. This bundle comes with a horizontal stainless steel vent kit, ready to install and with its 110-volt UL listed power cord powering the internal exhaust fan and digital display. The i12 only pulls about 2 watts while idle and 1.07 Amps during operation, making it an ideal energy efficient appliance.

Product Features

• Sleek, modern design with black tempered glass front panel
• Equipped with child locking technology
• Pulls about 2 watts idle and 1.07 Amps during operation
• Fully automatic temperature controls
• Horizontal Stainless Steel vent kit included
• Perfect for vacation cabins, cottages, and smaller homes
• Hot water capacity range: 0.6 - 4.8 GPM; Maximum / Minimum gas rate: 25,000 - 80,000 BTUs

What’s in the box?

• 1 x 2 1/2" 90 degree Elbow with Backflow Preventer
• 1 x Wall Thimble
• 1 x 2 1/2" x 20" Termination Pipe
• 1 x Instruction Manual
• 1 x 110 volt UL listed power cord

• Whole home indoor, gas powered tankless water heater, rated at 4 GPM that activates only on demand and no pilot light needed, reducing energy consumption
• Sleek, modern design with black tempered glass front panel featuring an easy to use LED display controls
• Features fully automatic temperature controls with an energy saving mode and child lock technology
• Safe electronic ignition system; Plugs into standard 110v electrical outlet with UL-listed cord
• Uses standard 1/2" NPT water fittings and comes with horizontal venting allowing for a convenient and quick installation

User questions & answers

Question:	questions. does the fan run continuously? Is there a 12v version? thanks
Answer:	Hello. Yes, when the I12-LP is heating water, the fan will run. There is no 12v version of this model. Here https://www.amazon.com/dp/B009EDGTXG/ref=olp_product_details?_encoding=UTF8&me= is an indoor propane tankless heater with a battery ignition.GadgetsGo is an Authorized Eccotemp Dealer.Kind Regards,Ross KGadgetsGo
Question:	does it have an electronic pilot light
Answer:	Good Day, Dennis!Our Eccotemp i12-NG is a fully automated tankless water heater. There is no Pilot light, but the front panel display would tell you everything from ignition to full operation. Our i12 is a flow activated water heater.Thank you!Eccotemp Systems LLC
Question:	Does it run on propane? It came up in my search for propane tankless water heaters but it's not labled as such
Answer:	Yes, this uses propane and is labeled as such. LP means liquid propane. And the item description says, "Rated at an impressive 3 GPM, the Eccotemp I12-LP tankless water heater is a liquid Propane fired..."GadgetsGo is an Authorized Eccotemp Dealer.Kind Regards,RossGadgetsGo
Question:	How do these hook up without a hot water tank
Answer:	this takes the place of a hot water tank. there are connections for the water and gas and one plug to an outlet. it heats the water as it passes through the unit.
Question:	What model is recommended for whole house
Answer:	Hello. I'm sure any one would work, but I'd go with this larger capacity model. After having in for awhile, this one can output enough for 2 showers at full capacity, but one seems to be just a little restricted. If we installed some different shower heads I'm sure there wouldn't be any issues. For the minimal increase in cost, I believe the additional capacity is worth it. You may not always need it, but it's nice to know it's there if you do.
Question:	I live in lower michigan and what model is recommended for whole house
Answer:	Hi Sue Ann. Please refer to the sizing information in the second pic in Amazon's item description. It's very important to read up on tankless and how it works before purchasing. Key points to know: Your max. simultaneous hot water flow rate when everyone is using hot water. Whether you have enough amperage in your electrical panel. Most homes in USA require an upgrade to the electrical service which can cost several hundred dollars.Kind Regards,RossGadgetsGo
Question:	Why are these so much less expensive than other name brand tankless heaters
Answer:	Could it be the others are over priced or not produced in the volume these are?
Question:	Even with 200 amp. My lights flicker with the water is in use. Any one having the same issue and how was the issue resolved? Thanks
Answer:	After having an electrician inspect the installation and unit, I was told the Eco 36 really should only be installed on a 300 amp service or above. It is a great unit, but for most homes trying to run it on a 200 amp service, it is too much of a draw on the electrical. It will cause flickering lights and will become a problem when your timing a full house with showers, laundry, dishwashing, etc. I love the unit, but my service is 200 amp, so I'll be removing this and installing a Rheem Electric Hybrid tank water heater.

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature. Tankless electric water heaters are sized for maximum simultaneous use, not maximum fixtures in your home.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

LED Display Controls

Turn off/on, adjust your desired temperature, measure GPM and more!

Energy Conscious

Uses virtually no energy while not in use. True on demand technology with low gas consumption.

Low Power Draw

While in use, the i12 uses around 2 amps. While idle it uses about 2 watts.

Product description

This electric tankless water heater is a true Point of Use Model because it is specifically designed for under the sink, single applications with a maximum flow rate of 0.5-Gallon per minute (gpm) and includes a 0.5 gpm sink aerator. This heater is flow controlled, meaning the temperature will adjust according to flow rate. It is the smallest sized Ecosmart electric tankless model and should not be used to run anything more than one sink at a time or used in areas where inlet water temperature is lower than 57°F. At this inlet temperature the ECO POU 3.5 can heat 0.5 gallons per minute to 105°F. Its compact size allows for under the sink installations. The Point of Use models are ideal for: Wet Bars, Strip Malls, Doctor's Office, Boats, Recreational Vehicles (RVs), Bathroom Sinks. When sized properly this water heater will provide endless hot water. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The Eco POU 3.5 requires a minimum 100 amp electrical panel for installation with 30 amp single pole breaker connected to #10 awg wire. Plumbing connections are 1/2" NPT. For additional assistance please feel free to contact our support center at 877-474-6473. TROUBLE SHOOTING STEP: When the water is not hot enough, please slow down the flow of water to increase temperature!

From the Manufacturer

This electric tankless water heater is a true Point of Use Model because it is specifically designed for under the sink, single applications with a maximum flow rate of 0.5-Gallon per minute (gpm) and includes a 0.5 gpm sink aerator. Its compact size allows for under the sink installations. The Point of Use models are ideal for: Wet Bars, Strip Malls, Doctor's Office, Boats, Recreational Vehicles (RVs), Bathroom Sinks. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

• Can provide hot water for one sink at 0.5 GPM in warmer climates
• Requires 1 x 30 amp breaker and 10 AWG wire
• For one sink at 0.5 GPM in colder climates the POU 6 is recommended
• Amperage Draw 29 amp. kW - 3.5 kW
• Connection Fittings 1/2" NPT

User questions & answers

Question:	Can the flow rate be adjusted up from 0.5gpm to say 1gpm or 1.5gpm (understood that the output water will be corresponding less hotter)? thanks in adv
Answer:	This is a 199,000 btu model, a 3/4" gas line is required to have sufficient gas supply.
Question:	degree water going in what degree will be at the tap
Answer:	rinnai recommends the GTK03 Grundfos kit for this unit
Question:	are any of these tankless water heaters plug in
Answer:	I think, you need buy a WiFi module, call Rennai and ask. Circ-logic did not work for me, I had to install re circulation pipe. Because of the high minimum flow requirements, this unit did not work with any regular re circulation pump, so wasted money buying a Watts pump. And paid double for the labor. Rennai told me that I should have bought their thankless heater with re-circulation built in.
Question:	Would you recommend this model for a shower in a guest bathroom
Answer:	IT CAME WITH ADAPTERS ON THE TOP. NO PIPING.

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: This product is fixed flow, which means that the output temperature rise of this product is determined by flow rate of the application. This chart gives you the expected temperature rise for various sink flow rates from 0.5 to 1.5 gallons per minute.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

• Whole home indoor, gas powered tankless water heater, rated at 3.6 GPM that activates only when in use, making it an energy saver.
• For indoor installation with safe, efficient power ventilation and perfect for any small home, cabin or apartment.
• Easy to read digital temperature display, on a compact and space-saving design with minimal noise output.
• Safe electronic ignition system; plugs into standard 120v electrical outlet with UL-listed cord.
• Uses standard 1/2" NPT water fittings and is equipped with easy to use manual water temperature controls.Minimum 0.65 GPM flow rate

User questions & answers

Question:	service number
Answer:	785-477-8702
Question:	How much current does it draw
Answer:	Hello Donna. Thank you for your question. This unit uses 120v, 60Hz and draws 2 amps.If we've helped you, please prefer us when you purchase on Amazon. Kind Regards,RossGadgetsGo
Question:	can i vent this thru a masonry chimney
Answer:	It needs to be ported outside.
Question:	What is the highest temperature achievable from this water heater? Will it produce temperatures in excess of 150 degrees F
Answer:	Assuming you have everything hooked up correctly, at 3.5 GPM, the MAX TEMP will be NO MORE THAN 55 degrees ABOVE THE TEMPERATURE OF THE INCOMING WATER. For example, if the incoming water temp is 50 degrees in the winter, then the max winter temp will be 105. In the summer, when the incoming water is 65 degrees, the max summer temp will be 120 degrees. This is the way ALL demand heaters work. Be SURE to check the TEMPERATURE RISE specification on ANY demand heater to know what it is truly capable of. If the TEMP RISE is specified at 3GPM, and you try to set it higher, it may CUT BACK THE FLOW RATE to achieve the higher temp, but it will NEVER exceed the TEMP RISE spec.

Product features

FVI12 Indoor Liquid Propane Tankless Water Heater

• Whole home indoor, propane-powered tankless water heater, that activates only when in use, making it an energy saver.
• For indoor installation with safe, efficient power ventilation and perfect for any small home, cabin or apartment.
• Easy to read digital temperature display, on a compact and space-saving design with minimal noise output.

• Safe electronic ignition system; plugs into standard 120-volt electrical outlet with UL-listed cord.
• Uses standard 1/2" NPT water fittings and is equipped with easy to use manual water temperature controls.

Prefect for Cabins!

Perfect for Tiny Homes!

Perfect for Apartments!

Perfect for Businesses!

Is this the right water heater for you?

Product description

Whether you’re camping with the family, spending a day at the lake, or lounging around the pool, sometimes all you need is a nice hot shower. Simply attach a garden hose and a 20 lb. propane tank and you are guaranteed to enjoy the luxury of hot water    anywhere. The Eccotemp L10 is perfect for campsites, cabins or simply around the house. The Eccotemp L10 is capable of reaching temperatures between 50 to 140 degrees Fahrenheit. This model includes an electronic ignition powered by 2 "D" cell batteries    making it great for off grid or other areas where electricity is not readily available. Compatible with 12 volt pumps and works perfectly with our EccoFlo Pump & Strainer.         Easy Installation    Hang L10 using the mounting bracket on the top/back of the unit    Connect the gas cylinder with the supplied gas hose and regulator    Connect water hose to the hot water outlet    Connect water hose to the water inlet    Insert 2 "D" cell batteries and activate the on/off switch on the bottom of the unit    Enjoy instant hot water!Product Features     Great for camping, outdoor showers, washing your dog and much more!    Frustration Free Packaging    Upgraded Chrome Shower Head and Stainless Steel Hose    Operating range of 20-80psi    20-min Safety Shut-off Timer    45 degree Safety Tilt-Switch    Includes: gas regulator and hose, showerhead, garden hose adapter, & output water quick connect    Easy to use temperature controls    Compact, lightweight and easy to store and carry         Have questions? Contact [email protected] or call 1-866-356-1992

From the Manufacturer

Whether you’re camping with the family, spending a day at the lake, or lounging around the pool, sometimes all you need is a nice hot shower. Simply attach a garden hose and a 20 lb. propane tank and you are guaranteed to enjoy the luxury of hot water anywhere. The Eccotemp L10 is perfect for campsites, cabins or simply around the house. The Eccotemp L10 is capable of reaching temperatures between 50 to 140 degrees Fahrenheit. This model includes an electronic ignition powered by 2 "D" cell batteries making it great for off grid or other areas where electricity is not readily available. Compatible with 12 volt pumps and works perfectly with our EccoFlo Pump & Strainer.

Easy Installation

1. Hang L10 using the mounting bracket on the top/back of the unit
2. Connect the gas cylinder with the supplied gas hose and regulator
3. Connect water hose to the hot water outlet
4. Connect water hose to the water inlet
5. Insert 2 "D" cell batteries and activate the on/off switch on the bottom of the unit
6. Enjoy instant hot water!

 

Product Features

• Great for camping, outdoor showers, washing your dog and much more!
• Frustration Free Packaging
• Upgraded Chrome Shower Head and Stainless Steel Hose
• Operating range of 20-80psi
• 20-min Safety Shut-off Timer
• 45 degree Safety Tilt-Switch
• Includes: gas regulator and hose, showerhead, garden hose adapter, & output water quick connect
• Easy to use temperature controls
• Compact, lightweight and easy to store and carry

 

Have questions? Contact [email protected] or call 1-866-356-1992

Manufacturer Contact Information

Please visit Eccotemp.com to find answers to frequently asked questions, product manuals, or to create a support ticket.



[email protected]

866-356-1992

• Includes 9' CSA approved gas regulator and hose for use on a standard 20 lb grill style tank
• Includes stainless steel rain cap; 74,500 BTU's
• Includes 1/2" NPT to garden hose adapter
• 20 minute automatic safety shutoff timer (resets when water stops, then starts again)
• Gas type: Liquid propane, CSA regulator for use with standard 20 lb. grill propane tank
• Installation: Outdoor , Applications: Cabins, Recreational

User questions & answers

Question:	Does this work when temperatures drop to below freezing
Answer:	When it freezes below about 20 you have to drain it to protect the coils. That said, you may start the water and fire it up when it is below freezing, just remember to drain it once it cools off.... Our unit works on a single handle application, it just has to be set at a lower temp.
Question:	Can this unit be exposed to weather
Answer:	yes....just dont let it freeze...great unit....i use it off grid so battery ignition is great.....20 min hot water at a time just let it rest for 5 and its ready to go again
Question:	How long does a 20 gallon propane tank last with this unit
Answer:	it's hard to say... depending on usage but I have also used the smaller unit L5.... I found it was just about as fast.... maybe not as hot in colder season but much more efficient on propane. I used the L5 more than than my new L10 and had a month of use.... doing dishes washing up and showers for one person (month of October in the Canadian Maritimes) out of a 5 lb tank.... I was thrilled... I changed to L10 because I foolishly let the L5 freeze and cracked some parts (which I intend to fix) but L5 were back ordered and I needed a unit quickly... love the L10 but it's using more propane... hope it helps
Question:	Is it possible to mount this product on outside of travel trailer? If so, what precautionary steps should be taken
Answer:	I wouldn't: you can, however, mount it to a fixture that can be secured to a stand. (meaning, it's easy to steal) I don't believe that it was designed to be mounted to a travel trailer, though you can always contact the manufacturer, and ask them.

Product features

About Us

Eccotemp was founded in 2004 as a family owned and operated manufacturer of energy-efficient products located outside of Charleston, in Summerville, SC. We are proud to say we still hold a strong belief in traditional family values, and that belief is largely why we take customer satisfaction so seriously. Families all over the world trust Eccotemp to take care of them and we do so with immense pride.

Since our conception, we have utilized the latest technological advances to engineer products that operate with maximum efficiency and conserve energy. Our mission is to improve the lives of our customers and to spread awareness about the benefits of our ecologically-friendly products. For more information and to shop Eccotemp’s full product line, including our Whole Home, Electric, and Portable tankless water heaters, please visit our website.

Recognized as one of the top sellers of portable tankless water heaters in the world, Eccotemp can be found at over 2,000 major and independent retailers throughout North America, Europe, and Australia. Among our most notable retailers are Amazon, Home Depot, Wal-Mart, Sam’s Club, Camping World, and more. We continually strive to deliver affordable hot water solutions to a myriad of industries, and our efforts have paid off.

Eccotemp is constantly researching and developing improvements for the full spectrum of products and services we provide. We believe that everything we do should positively impact the lives of our customers. From the conceptualization and engineering of our state-of-the-art products to harnessing the most recent technological advances that enable us to offer a level of service and customer satisfaction unparalleled by any manufacturer in our field, Eccotemp will never stop seeking growth and progress.

Product description

Eco Smart ECO 36 Electric Tankless Water Heater, 36 KW at 240 Volts with Patented Self Modulating Technology Why Eco Smart? If you have a need for a high amount of hot water then the ECO 36 is the right choice. The ECO 36 is the largest electric tankless water heater available with our patented self-modulating technology. This smart technology tankless water heater is ideal for the northern United States, where incoming water temperatures can reach as low as 37 degrees F. The ECO 36 is capable of heating nearly 3.5 gallons per minute at this low temperature. To put that into perspective, it can handle up to two showers running at the same time and never run out of hot water. For homes in the southern United States, the ECO 36 is perfect for large Roman-style and Jacuzzi tubs or high demand of hot water between multiple applications. It can handle up to 6 gallons per minute, which means you can run four showers and a sink simultaneously and never run out of hot water. A digital temperature control allows you to set your temperature in increments of 1 degree, so you can set the temperature to how you like it. The ECO 36 is the most powerful model from our full line of tankless water heaters, with the capacity to handle a large single-family home.Take a look at our full line of tankless water heaters below to see what's perfect for you. THIS MODEL REQUIRES 150 AMPS DEDICATED!. Required Wire: 4 x 8 AWG

From the Manufacturer

Ecosmart ECO 36 Electric Tankless Water Heater, 36 KW at 240 Volts with Patented Self Modulating Technology Why EcoSmart? If you have a need for a high amount of hot water then the ECO 36 is the right choice. The ECO 36 is the largest electric tankless water heater available with our patented self modulating technology. This smart technology tankless water heater is ideal for the northern United States, where incoming water temperatures can reach as low as 37 degrees F. The ECO 36 is capable of heating nearly 3.5 gallons per minute at this low temperature. To put that into perspective, it can handle up to two showers running at the same time and never run out of hot water. For homes in the southern United States, the ECO 36 is perfect for large Roman-style and Jacuzzi tubs or high demand of hot water between multiple applications. It can handle up to 6 gallons per minute, which means you can run four showers and a sink simultaneously and never run out of hot water. A digital temperature control allows you to set your temperature in increments of 1 degree, so you can set the temperature to how you like it. The ECO 36 is the most powerful model from our full line of tankless water heaters, with the capacity to handle a large single-family home. Take a look at our full line of tankless water heaters below to see whats perfect for you. THIS MODEL REQUIRES 150 AMPS DEDICATED!

• Sleek and compact design with digital output temperature display
• ECOSMART tankless water heaters are 99.8-percent energy efficient
• Manufactured in United States
• Pipe Fittings:3/4 inch NPT
• Required Breaker:4 x 40 A
• 150 A

User questions & answers

Question:	What model is recommended for whole house
Answer:
Question:	I live in lower michigan and what model is recommended for whole house
Answer:
Question:	Why are these so much less expensive than other name brand tankless heaters
Answer:
Question:	Even with 200 amp. My lights flicker with the water is in use. Any one having the same issue and how was the issue resolved? Thanks
Answer:

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature. Tankless electric water heaters are sized for maximum simultaneous use, not maximum fixtures in your home.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

Product description

This compact model saves space and allows easy installation just about anywhere. It heats unlimited volume of water as needed and permits you to regulate the water flow and gas flow to better temperature. So if you instant and on demand want hot water, this is the product for you! It is also a perfect alternative for those homes experiencing frequent power outages since this heater does not require electricity. The 10L unit provides up to 3. 1 Gallons Per Minute, to provide hot water for your home family at multiple points of use! . Vent diameter-4 inches

At the higher flow rates you lose some of the temperature increase. So, they are more efficient at 2.7 GPM.

• It does not contain any fabrics.
• Imported
• Digital Temperature Display
• Compact design saves space and allows for easy installation just about anywhere
• Does not require electricity (operates with 2 D Cell battery)
• Only uses gas while water is flowing
• Saves water and up to 60% less electricity than conventional tank water heater, making it cost effective and

User questions & answers

Question:	how many lpm needed to ignite
Answer:	Sure, thers is a button to take off the reservoir, and you could clean it by a brush
Question:	Can this be connected to a 20 lb propane cylinder? I is the regulator and hose included
Answer:	This dental flosser comes 6 with tips: Classic Tip x 2, Brush Head, Orthodontic Tip,Tongue Cleaner, Periodontal Tip.
Question:	what is the btu
Answer:	I have a dental bridge so this is exactly what I need to clean underneath it. It works Works perfectly.
Question:	can I hook it to a chimney
Answer:	It is 12-1/2" tall, which is not particularly relevant to anything except storage. The important measurement is from where it clips onto the container: the container must be at least 6" deep (can be more, of course). It is just under 3" from the bottom of the unit to the min. mark and 5" from the bottom of the unit to the max. mark. How many inches from the bottom of your container will vary, depending on the container you opt to use with this.