13 best instant hot water heater

Product description

Get hot water where it's needed, when it's needed with the Bosch ES4 Tronic 3000 T Electric water heater. This 4-gallon capacity point-of-use mini-tank fits right under your sink and provides a practical and effective solution to your hot water needs. This smaller model can be plugged right into a 120-volt outlet with the 36-37" cord, or can be installed in-line with a larger hot water source to provide "on-demand" use. The glass-lined tank offers great insulation and added durability, while the heater's fast recovery rate eliminates long waits for hot water. An external dial allows you to easily control the temperature range, and the temperature-and-pressure relief valve enhances your safety. The ES4 Tronic 3000 T from Bosch has a sleek and attractive exterior design that blends in seamlessly with existing decor when installed in a visible location, making this heater a great option in any room. Water Heater measures 13.75" H x 13.75" L x 13.5" D and weighs 17.3 lbs. Do not operate this water heater if it is has a damaged cord or plug, if it is not working properly, or if it has been damaged or dropped

Manufacturer Contact Information

800-283-3787

• CONVENIENT HOT WATER HEATER: 4 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%. Dimensions : 13.75 W x 13.75 H x 13.5 D Inches
• LONG LASTING QUALITY: This electric water heater is easy to maintain and has premium glass-lined material for a long service life. (Amps 12A, Volts (VAC) 120)
• INDEPENDENT INSTALLATION: 36-37" cord plugs into a 120 volt outlet for independent installation or in-line with a large hot water source
• FAST RECOVERY RATE: Eliminates long waits for hot water at your sink, get on demand hot water at your every need (supplies up to 2 sinks at a time)
• EASILY MOUNTED: Can be shelf, wall or floor mounted (bracket included); simply tap into the cold water line and install the water heater directly at the sink to provide hot water

User questions & answers

Question:	Is it necessary to connect an expansion tank to this heater (for safety purposes)? It states something to that effect in the user manual
Answer:	Yes, that is correct! Look for 1/2 to 3/4" hoses here on Amazon, or whatever you connection size is. They are very cheap and convenient here.
Question:	would this be able to supply a shower
Answer:	Installed at the outlet of the water heater, mainly to prevent electric shock, which is the second layer of protection
Question:	Can be used "in-line with a large hot water source"? Would it help a large bathtub that runs out of hot water before it gets full from main tank
Answer:	Should it be a white line? It means it has been powered on and can work after waiting for your settings
Question:	When this heater is connected to the hot water line, what happens with the cold water that was sitting in the pipes
Answer:	Dear Customer,  Thanks for your inquiry,BISELONG this water heater is not equipped with a remote control, you only need to adjust the temperature you want, generally do not need to adjust again.If you get any other question, please feel free contact us at [email protected] any time, we will do best to serve and help. Wish you pleasant shopping. Fly form BISELONG

Product features

Bosch ThermoTechnology

The Bosch Tronic 3000 T point-of-use electric mini-tanks are available in three compact sizes, which can be wall-hung (bracket included) or floor-mounted. They fit easily under a sink, even in a cabinet space, and because they have a sleek and attractive design, they blend in seamlessly with existing decor when installed in a visible location. Simply tap into the cold water line and install the water heater directly at the sink to provide hot water. Great for a wide range of locations!

Water Where You Need It

Provides hot water quickly at point of use and comes with temperature /pressure relief valve installed - 2.5 and 4 gallon tanks feature a simple 120 VAc plug-in connection (1440 watts).

Quality for Long-Life

Thick CFC-free foam insulation for maximum energy efficiency, glass-lined tank for durability.

Great for Small Spaces

Water heaters are compact and lightweight and can be floor, shelf, or wall mounted (except 7 Gallon) - features a sleek and attractive design to blend seamlessly with decor.

Minimize Wait Time for Hot Water

Waiting for hot water at a sink located far from a primary heating source can be frustrating. Only having access to cold water from a sink is just not useful, and plumbing a hot water line to every sink in a home or business requires time and money. To get hot water where it’s needed, when it’s needed, a better solution is to use the Tronic 3000 T from Bosch: a point-of-use electric mini-tank heater. This heater can supplement a primary water heating source, or be used under a single sink. In fact, the Bosch Tronic 3000 T can be used for three different applications: as a sole water heating source for a single sink, as a supplement to an existing heater located far from the sink, and as a buffer installed in-line with tankless water heaters that experience intermittent cold water, also known as 'cold water sandwiching'. No matter the configuration, there’s minimal stand-by loss from this premium mini-tank water heater.

Product description

 Color:BIS03-White (no remote control)



FEATURES



Mini-Tank Water Heater comes with 1.5kW heating element, expect hot water for 3 seconds, perfect choice for sinks to provide endless hot water any time.



ENERGY SAVING



This tankless water heater avoids standby heat loss of those bulky storage water heaters, minimize energy waste and achieve 95% energy saving with help of its smart self adjustment technology.



HEALTHY WATER QUALITY



MULTIPLE SAFETY PROTECTIONS



Over temperature protection



Dry heating protection



Leakage protection



Water and electricity line separated



EASY INSTALLATION



Real compact design, water heater cooridates with scenes decor, under sink water heater, Can be shelf, wall or floor mounted. Comes with easy installation brackets, pipe fitting of 1/2" NPT and 10AWG power cord(fixed to the unit) so you don't to have to hire a plumber even if you can do it.



SPECIFICATIONS



Power: 1.5kW



Voltage: 120V~50Hz



Min. water flow to activate the unit: 0.475GMP



Maximum temperature 167°F



Max. Amperage: 15A



Recommended wire size: 10AWG



Required circuit breaker : 1x1-Pole 20 AMP



KINDLY NOTE



1.The equipment is mainly used for sinks.



2.Mini-tank water heater should be installed professionally.



3.Please read instruction manual carefully prior to installation and use!

• The label on the right of the product is to allow customers to use the product more energy-savingly. We will improve the language expression in the future. We are very sorry.
• 【NOTE】Fill the water first, then power on (otherwise it will damage the water heater).
• 【SAFE DURABLE & LONGEVITY】304 Made of stainless steel and never rust，Anti-leakage plug，Multiple safety protection functions protect you from the risk of scald, leakage or other injury.Premium plastic shell is corrosion resistant，This mini hot water heater is ideal for kitchen, bar, school, hospital, community and RV.
• 【SMART INVERTER FOR ENERGY SAVING】Digital Display，Automatic heat preservation and storage of hot water, 3.0 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%，Maximum temperature167℉，The built-in smart chip heats up to the temperature you set, and automatically Insulation when heated to the specified temperature.
• 【EASY TO USE】storage tank electric water heater with easy-to-operate knob temperature adjustment design，Easy to control warmth.Vent valve, Tee pipeline， pipes and other accessories are complete for quick installation without additional expenses or preparing time of accessories.
• 【FAST RECOVERY RATE】Eliminates long waits for hot water at your sink, get on demand hot water at your every need (supplies up to 2 sinks at a time，8-15 minutes to heat to your desired temperature).
• 【COMPACT DESIGN】Can be shelf, wall or floor mounted (Water inlet and outlet upward); Dimensions: 18.0''L x12.6''W x10.2''H; 8.86lbs; 1/2″NPT NPT. 1.5 kW, 110-120 volts. One-year warranty and 24H customer service support, feel free to contact us.

User questions & answers

Question:	Can I connect the water intake on this unit from the hot water supply from my house water heater? The house heater is very far from kitchen sink
Answer:	Yes you can connect this unit to the hot water supply line from your existing hot water heater and have hot water delivered to your kitchen sink. This unit will reheat the hot/warm water to the desired temperature. This should ensure you have continued hot water.
Question:	what is the lowest temperature this can be set at
Answer:	86℉
Question:	Brass tee provided does not seal on the hot water outlet, any tips
Answer:	The brass 3 way T is not meant to connect to outlet nipple. It needs the 1/2 in compression connector provided with it.
Question:	Can this be mounted laying down or does it have to be in a vertical position
Answer:	It is vertical

Product features

AGU 1.5Kw Mini-Tanks Water Heater Electric

Features

Saves Energy and Money - No need to preheat before using,no any waste for water or electricity.

Endless Hot Water - Digital Display，Maintenance-free bare wire heating systems.Depending on the region, the water temperature can be heated to 167℃ within 8-15 minutes.

Space Saving - Very compact designed, which can be wall-hung (bracket included) or floor-mounted，easy to install.

Hot water on call

Waiting for hot water at a sink located far from a primary heating source can be frustrating. Only having access to cold water from a sink is just not useful, and plumbing a hot water line to every sink in a home or business requires time and money. To get hot water where it’s needed, when it’s needed, a better solution is to use the AGUST: a point-of-use electric mini-tank heater. This heater can supplement a primary water heating source, or be used under a single sink and double sink. In fact, the AGUST can be used for three different applications: as a sole water heating source for a single sink, as a supplement to an existing heater located far from the sink, and as a buffer installed in-line with tankless water heaters that experience intermittent cold water, also known as 'cold water sandwiching'. No matter the configuration, there’s minimal stand-by loss from this premium mini-tank water heater.

INSTANTLY HOT WATER

As soon as you open the tap, the water flows with your desired temperature. The water is only heated in the amount and for the time you actually need it.

ENERGY EFFICIENT

It saves energy by producing hot water only when needed. Instant hot water flows out at anytime you need.

KNOB ADJUSTMENT

Equipped with a Knob adjustment control for stable temp. easy and convenient. Just turn the knob to the maximum and submit the temperature suitable for you through the faucet，Optimal energy efficiency is promised.

GREAT FOR SMALL SPACES

Water heaters are compact，It can be installed under the sink features a sleek and attractive design to blend seamlessly with decor, very friendly to any small spaces.

Product description

This Smart Technology electric tankless water heater is configured as a "whole home" model for climates where incoming water temperature is 67°F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67°F and an output setting of 105°F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with 60 amp double pole breaker connected to set of #6 awg wire. Plumbing connections are 1/2" compression fitting with the option of 1/2" NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.



NOTE : 11Kw at 220 is equal to 13kw at 240. .Activation Flow : 0.3 GPM

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

• Lifetime warranty
• Save up to 60-percent on your water heating cost with an ECOSMART electric tankless water heater
• Never run out of hot water with an ECOSMART tankless water heater
• Patented Self Modulating Technology and design
• ECOSMART tankless water heaters are 99.8-percent energy efficient.Uniform Energy Factor:0.98

User questions & answers

Question:	Ours has only been in service for less than a year - will not adjust temperature to anything above 85 Deg. F. What do you think is the problem ? kds
Answer:	My only guess is that the rheostat (variable resistor) that the temperature adjustment knob is attached to may be faulty. If that isn't it then I don't know. Sorry.
Question:	The warrenty says that this unit must be installed by a licensed electrician and plumber, for them to honor the "life time warrenty." why
Answer:	Hello Bob, The reason is the same as why an innumerable number of gadgets around the world have that little "warranty void if removed" label. Because getting inside of one requires a certain level of training and expertise. Same with this unit. GadgetsGo is an authorized Ecosmart dealer. Kind regards,HenryGadgetsGo
Question:	My house is wired 110V. What additional items do I need to purchase for the conversion
Answer:	Just to expand slightly on prior answers, normally a residential service feed is 240 volts between the two incoming hot legs. There is also a neutral leg, which (hopefully) has zero potential with reference to ground. The voltage between either one of the hot legs and the neutral leg is 120 volts. The 120 volt circuits in your house are connected to one or the other of the two hot legs, and only one. An attempt is made to assign circuits to the two hot legs in a way that will roughly balance the load between them. The other side of a 120 volt circuit is connected to the neutral leg. There is additionally a safety ground run with the circuit, which also ties into the panel. Certain devices require more power (work product of current and voltage) than is practical to deliver using a 120 volt circuit. Common examples are your clothes dryer, and your electric stove. These devices are powered by both hot legs, with a difference in potential of 240 volts. This water heater is also such a device.STRONG BUT FRIENDLY WARNING: If you did not already know this, please don't make wiring this water heater your learning opportunity with electricity. Hire someone who knows how to do it right. Cutting corners, especially with higher currents and voltages, can lead to equipment damage, fire, and electrocution. Electricity is not magic, and you can certainly learn how to do many common wiring tasks safely on your own, but today is not the day to begin that journey. You need properly sized components, properly installed, and connected to an adequate service. Also, if you really, really foul up, you could conceivably wind up making that morning shower more energizing than you ever imagined, if you get what I mean. So newly aspiring electricians should go fix their grandmother's favorite table lamp instead. Once they have that working they can use it to to start reading books about electricity, residential wiring, and eventually, books about this stuff: http://amazon.com/s/ref=nb_sb_ss_c_0_8?url=search-alias%3Dstripbooks&field-keywords=nec+code&sprefix=nec+code%2Caps%2C164 . Of course, you still have to know not to nick conductors when you strip them, and other trade craft like that ; ) . Like almost everything in life that is fun, electricity will hurt you. Sort of like all those people you dated for a while, and then wished later you had never met.
Question:	what amp breaker is required
Answer:	The National Electrical Code requires conductors and overcurrent protection to be sized at 100% of the manufacturer's branch circuit recommendation for tankless electric water heaters. A 60 amp breaker is the same price as a 40 or 50, it is the wire that costs more. #6 AWG wire is required for a 60 amp circuit. If you undersize the wire it could overheat and catch fire. Protect your family and follow the manufacturer's sizing for this, or any other, electrical device. Your family's lives are worth the extra money. 

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature. Tankless electric water heaters are sized for maximum simultaneous use, not maximum fixtures in your home.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

Product description

Those who mind will buy with caution! ! !

According to our actual tests, the outdoor water temperature is low, and the water flow should not be too large.The heating power of this product is constant, the temperature is adjusted by the water flow regulating valve or the tap switch, the high temperature of the water flow is low, and the low temperature of the water flow is high.

It is recommended that the product be washed in winter for hand washing, dish washing, face washing and other scenes;Those who mind will buy with caution! ! !Those who mind will buy with caution! ! !



Note: 1. Due to the relatively small space in the inner tank of the water heater, when the water flow is closed, the remaining temperature of the water in the inner tank is still rising. Turn on the water flow again, the temperature will be warmer, and the temperature will stabilize again after a few seconds. The temperature is adjusted by the water flow adjustment penalties or the faucet switch.



Note:

❤ Please note this item should get the water first and then link the electricity when installing

❤ You'd better install this item vertically to ensure long service time.

❤ Please kindly make a note if you need any adapter.

❤ Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.



Specifications:

Material: Stainless Steel Shell

Power: 3000W

Current: 25-32A/Voltage: 110V

Rated Frequency: 60Hz

Rated Pressure: 0.4-0.6Mpa

Waterproof Grade: IPX4

Temperature: 30-55℃(Considering the use environment in severe cold areas may not reach the maximum temperature of 55℃)

Installation wire diameter: 1.5-2.5mm² copper wire

Water pipe interface: G 1/2" interface

Size: Approx. 20 x 10.5cm / 7.87 x 4.13inch



Package Included:

1 x Water Heater

2 x Fixing Screws

2 x Screws Protector

1 x Manual

• 【SELLER TIPS】Those who mind will buy with caution! ! !The heating power of this product is constant, the temperature is adjusted by the water flow regulating valve or the tap switch, the high temperature of the water flow is low, and the low temperature of the water flow is high. According to our actual tests, the outdoor water temperature is low, and the water flow should not be too large, which is suitable for daily washing. Those who mind will buy with caution! ! !
• 【INSTANT & SUFFICIENT HOT WATER】The heating of the product is adjusted by the water flow regulating valve or the faucet switch. Large water flow means low temperature, and small water flow means high temperature. Applied with 3000W heating system, the electric water heater supplies instant, consistent and endless hot water shortly, no waiting for preheat nor terrible temp up & down, perfect companion for sinks. Time to get rid of those "lukewarm" toys.
• 【SMART SELF ADJUSTMENT】The hot water heater adjusts power input based on flowing rate and temp setting in real time. thus you still get ideal temperature instead of scalding hot water, which means comfortable experience, simple operation. It is recommended that the product be washed in winter for hand washing, dish washing, face washing and other scenes;Those who mind will buy with caution! ! !
• 【Eco & Electric & Water Saving】 Safe heater, save up to 55% on your electric cost, water saving, no pollution, no exhaust gas.The heating of the product is adjusted by the water flow regulating valve or the faucet switch. Large water flow means low temperature, and small water flow means high temperature. It is recommended that the product be washed in winter for hand washing, dish washing, face washing and other scenes.
• 【SAFE AND DURABLE】Applied with multiple protection devices, every piece goes through strict tests to ensure 100% safe. Inner water and electricity lines are designed to run separately so as to avoid leakage or harm of scale build up. Safe heater, electricity saving, water saving, no pollution, no exhaust gas.The temperature is adjusted by the water flow regulating valve or the tap switch.Those who mind will buy with caution! ! !

User questions & answers

Question:	I want to use to heat hot water at kitchen until hot water arrives at sink from main tank. Will this adjust as the intake water increases in temp
Answer:	The heating power of this product is constant, the temperature is adjusted by the water flow regulating valve or the tap switch, the high temperature of the water flow is low, and the low temperature of the water flow is high.
Question:	Will the heating effect of the product be poor
Answer:	It is hot enough for installation in the kitchen.
Question:	how do i adjust water temature
Answer:	The heating power of this product is constant, the temperature is adjusted by the water flow regulating valve or the tap switch
Question:	will the water inlets attach to a water hose
Answer:	Not as they are. You'll have to find an adapter. Also you need to be careful of its orientation when you're using it.

Product description

The Ariston Andris 2.5 Gal. 6 Year Corded 120-Volt Point of Use Mini-Tank Electric Water Heater has a mini tank that eliminates the long trip through pipes that water usually has to take from the water heater to the sink. This powerful, yet compact water heaters purpose is to provide you with hot water, when and where you need it. Installation has never been easier, with a simple tap into a cold water line and a standard 120-Volt outlet.

• EASILY ACCESSIBLE HOT WATER: Compact designed 2.5 gallon mini tank. Provides instant hot water at point of use. 6 year limited warranty on tank, 2 year warranty on parts. Wall or floor mounted unit (wall brackets & rubber feet included).
• DO IT YOURSELF INSTALLATION: 1440-Watt heating element draws 12 Amps. 65-161°F temperature range. Easy installation thanks to a standard 120-Volt outlet.
• CAN FIT VIRTUALLY ANYWHERE: Dimensions (pipes included): 14.25"W x 14.25"H x 10.75"D; Water Connection: 1/2" NPT
• ELECTRICAL CONNECTION: Plug-in; Relief Valve: Factory Installed; Recommended Circuit Breaker Size: 15A
• QUALITY YOU CAN COUNT ON: TitanShield, exclusive technology that fully protects the tanks inner surface against corrosion. Robust environmentally safe foam insulation to increase energy efficiency. Eliminates the need for a recirculation line.

User questions & answers

Question:	Can this be mounted horizontal
Answer:	How long does it take to heat the water when turned on?
Question:	When we went to connect the water connector tube to the red ring hot water outlet it would not fit. There was a red tub in the outlet that prevented t
Answer:	Yes, you are correct, one of the units I installed had the same issue with the red plastic fitting liner protruding, and it cannot be pushed in or removed. I solved the problem by filing the plastic down to just above the metal pipe. Make sure to keep it level and remove burrs. Another fix would be to use standard pipe fittings such as putting a street ell on the tank nipple then connecting your flex hose to that - use brass or stainless fittings and pipe dope.
Question:	Has anyone used a t-valve to hook this to their toilet inlet line? I'd like to split the toilet line, install this, then attach my sprayer bidet
Answer:	Yes you can, but you know, you can buy a bidet with a water on demand heater built in it ! much better and you are not reheating 2.5 gals of water after each use. Check on Amazon or Wish for a bidet, it is not expensive .
Question:	Does it need its own breaker
Answer:	Yes and no, it depends on where you are robbing the power from ,if it is from a circuit with very little use like bath wall outlets only ( like I did ) I would say no ,but if its from a circuit with heavy use, I would say yes, also what are you going to use the hot water for ? in my case, I use mine at the wash basin only so it is not heating continuously. .

Product features

ANDRIS RS 2.5 GALLON ELECTRIC MINI TANK WATER HEATER

SINGLE FAUCET UNIT

• Remote locations
• Single water line
• Wall or floor mounted
• Eliminates the need for a recirculation line
• Easy Installation

BOOSTER UNIT

• Improve existing capacity
• No waiting time
• Load reduction
• Eliminates the need for a recirculation line
• Built-In redundancy

SINGLE FAUCET OR BOOSTER UNIT IN A WATER HEATING SYSTEM

This compact yet powerful hot water heater supplies instant hot water to even the most remote locations:

• Smaller/Second properties
• In-Law suites, Kitchenettes
• Sinks located far from water heater: Pool House/Garages
• Supplemental hot water for high-flow fixtures
• Commercial bathroom sinks

Product description

HWT-00 Hot Water Tank

• 2/3-gallon stainless steel tank dispenses up to 60-cups of water per hour (recommend 30-125 psi)
• Easy-to-adjust temperature control (adjustable from 160°F - 210°F)
• Tool-free tank connections and dry start protection to ease installation
• For use with InSinkErator instant hot water dispensers (excluding model Hot1 and Hot100), Water filter is not included
• Meets UL 94HF-1 flammability specification, 115 volts, 750 watts, 6.5 amps, cULus Listed, Certified NSF/ANSI 372
• Included components: Tank Only

User questions & answers

Question:	Does this hwt-00 replace a hc-1100 insinkerator model from
Answer:	Counter top to top of fixture: 11-15/16" installed.
Question:	Does this hwt-00 come with a power cord attached
Answer:	This faucet does NOT have a "vent" tube for air to be released from the water tank, back into the faucet. Insinkerator faucets require this. I am still trying to find a work around for this.
Question:	Is there anyway to talk to a person before ordering
Answer:	3. There is NOT a "vent" tube for air to be released from the water tank, back into the faucet. Insinkerator faucets require this. I am still trying to find a work around for this.
Question:	does this unit come with everything i need to connect a hot water dispensor faucet from insinkerator
Answer:	The READY HOT FAUCET has a 3/8" white silicon hot water inlet tube but many of the instantaneous heaters has 1/4" hot water connectors/tubes. I have not been able to find an adapter!!!!!!

Product features

Hot Water Tanks

Welcome to the heart of your instant hot water system. Although the tank lies hidden below your sink, its contributions to instant convenience can’t be overlooked. The InSinkErator instant hot water tank always has near-boiling water ready when you need it.

Designer Faucets

The perfect complement to your main kitchen faucet, an InSinkErator instant hot water faucet sits on the edge of your kitchen sink ready to dispense filtered near-boiling water exactly when you need it. Available in 4 styles, up to 13 different finishes, and hot only or hot/cold models. Tank sold separately.

Water Filtration

Enjoy safer, better tasting water. Adding an InSinkErator water filter to your instant hot water system ensures that your nearboiling or cold drinking water is healthier and better tasting.

Complete Instant Hot Water System

Our instant hot water systems pair compact, affordable and stylish faucets with our 750-watt hot water tank for instant gratification at your fingertips.

You’d be surprised how useful near-boiling water can be. Whether you’re cooking, cleaning or preparing hot beverages, InSinkErator makes hot water happen instantly.

The perfect complement to your main kitchen faucet, an InSinkErator instant hot water dispenser sits on the edge of your kitchen sink ready to dispense filtered near-boiling water exactly when you need it.

Designed with safety, elegance and functionality in mind, InSinkErator instant hot water dispensers help you save time, space and energy in the kitchen, so you can get on with more important things in life.

Make hot beverages, kickstart boiling, quickly clean dishes, thaw frozen food, serve hot cereals, and clean without harsh chemicals. There are countless ways to use an instant hot water dispenser, but we anticipate that you’ll discover many more.

• 🚿【TIPS】Please notice that the 18KW tankless water heater requires 2 x 40 AMP breakers and 2 x 8 AWG wire, the Min. Water Flow is 0.4GPM/1.5L/min. The 24KW tankless water heater requires 3 x 40 AMP breakers and 3 x 8 AWG wire, and the Min. Water Flow is 0.66GPM/2.5L/min.
• 🚿【Save Money Save Cost】No need to preheat before using instant tankless water heater. After using our Rinkmo high efficient water heater, you will find your water Heating Costs Reduce Up to 60%, due to our heater is 99.8% Energy Efficient, you can get hot water within 3s; Create heat without direct contact with metals,No mineral buildup so you don't need to maintenance or fix it and replace the heater coils, No expensive maintenanc cost in the future.
• 🚿【Stable Water Temp for Whole House 】Our smart modulating technology and formula to calculate the difference between the desired temp and current temp, adjusts power input based on flow rate and temp setting in real time by our temp sensors and flow sensors. No sudden temp changes.
• 🚿【Stable Water Temp for Whole House】Our smart modulating technology and formula to calculate the difference between the desired temp and current temp, adjusts power input based on flow rate and temp setting in real time by our temp sensors and flow sensors. No sudden temp changes.
• 🚿【Compact Size Save Space】Rinkmo water heater only like a small suitcase, save your space and giving more to your living area. Easy to install and operation, set temp by turning the button, press the button to switch between Fahrenheit/ Celsius.

Product features

Rinkmo Electric Tankless Water Heaters Help You

Rinkmo has developed a new line of more efficient electric tankless water heaters within 3 years, which with improved design and state of the art technology.

It is a new generation of instant and efficient electric tankless water heaters, safe, efficient and cost effectiveness never before obtainable. Radically solve the problems.

You can install it anywhere hot water is needed.

Rinkmo always cares what consumers care about.

No Worry

Approved.

No above bad things happened under Rinkmo, you can enjoy your life without this terrible things even you have hard water.

Endless Hot Water

Not worry about the hot water even you have a long shower time.

No need to preheat, 3s you can get the hot water you want, no annoying delay and cold water.

Just turn on the tap or shower.

It can run both of our showers and dishwasher/washing machine without issue, up to 3 x faucet, 2 x shower at the same time.

Well suited also good for homes in the Northern U.S. and Canada or in the southern U.S. that have large Roman-style or Jacuzzi tubs that have generally more demanding water usage needs.

Get Comfortable Experience

Rinkmo use high quality temperature sensors and smart flow sensors, it is very important for our using experience.

So you can still get stable temperature water instead of scalding hot water, when you reduce flow rate or low water pressure.

The water temperature will not fluctuates anymore when you take shower and bathe baby.

-Auto protection: when it is detected that the outlet temp reaches 167 ° F (75 ° C) ,the system immediately cuts off heating for safe.

-Temperature abnormal reminder: The display will alarms if the inlet water temp <37° F, or the outlet temp >167° F

Fundamentally Solve Customer Problems

TURELY SAFE compared to other Traditional electric water heater or storage water heater.

Note

18kw Electric Tankless Water Heaters need:

Breaker:2x40AMP

Cable: 2x8AWG

Volts:240/208

Compact Design

Save space design, allows you install it in non-traditional spaces such as the utility room, basement, garage, attic, crawl space or even a closet.

Easy to read digital temperature display, no any complicated requirements for installation without minimal noise output.

Size: 18x14x3.7in

Weight: 11.2lb

Well sealed packaged that you can get a intact product, no any dented or damage.

Save Money Save Time

1. Compared to traditional tanks water heater:

Rinkmo instant Electric Tankless Water Heater only turn on when you need hot water, reduce the store heat loss, saving up to 50% in water heating costs, and you can get the fresh water.

2. Compared to other Electric Tankless Water Heater:

Totally solve most of safe problem and high maintenance costs, more cost-effective under our Original Water Pipe and Electricity Heating Separate tech:

304 stainless steel water pipe, healthy.

No mineral builup, no need to clean it.

No dirty water

You don't need to ask a plumber to repairing machine multiple times.

Real savings for your future cost, time and money.

Good for Other Commercial Places

Rinkmo Electric Tankless Water Heater not only for home use, but also for many other commercial places where need instant, endless and safe hot water, such as: apartment, barbershop, hotel, beauty salon, gym center, restaurent and so on.

More Smart Design:

-High quality sheet metal shell, fireproof

-Screen shows actual outlet water temperature clearly instead of the setting temp, safer

-Machine will auto stop if no water be heated.

-Adapt to 2 voltages: 240V/208V both ok, just 1 button to set it when install

-Cleanable filter

First, before order unit, you need to check below things:

Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location.

Second

Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature.

Third

Next you need determining specifications and electrical infrastructure.

Product description

The InSinkErator HOT150 Instant Hot Water Dispenser System is the newest and most affordable addition to the Invite series. So simple and useful, once you use it, you will love it instantly.

With near-boiling water at your fingertips, you can enjoy the convenience of instantly preparing gourmet coffee and hot tea, steaming vegetables in a flash, warming baby bottles in seconds, removing candle wax from candle holders with ease, cleaning without the use of harsh chemicals, removing stubborn lids and labels, and so much more.

The HOT150 instant hot water dispenser features a modern Satin Nickel finish hot water faucet and 750-watt, 2/3-gallon stainless steel tank that delivers near-boiling water. An easy-adjustable thermostat allows you to control the temperature from 160 degrees F to 210 degrees F.

The HOT150 system is designed for do-it-yourself installation, with no special plumbing required. Convenient tool-free tank connections and dry-start protection provide easy set-up and peace of mind. The system requires an unswitched AC power outlet, dedicated control valve with compression fitting, and T-fitting. The faucet requires a standard 1-1/4-inch to 1-1/2-inch diameter hole for installation with a maximum counter thickness of 2 inches.

InSinkErator covers the HOT150 instant hot water dispensers with an exclusive 1-Year We Come to You In-Home Full Service Limited Warranty. This warranty includes free house calls (including parts and labor) for the entire warranty period.

• Includes Satin Nickel finish instant hot water dispenser and unique Hot100 2/3 gallon stainless steel hot water tank
• Delivers up to 60 cups/hour of 200 degree f near-boiling water
• We come to you 1-year in-home limited
• Tool-free tank connections and dry-start protection to ease installation
• Easy-to-adjust temperature control. Spout height-6.25 inch. Spout Reach-5.38 inch

User questions & answers

Question:	Does it come with a power cord
Answer:	Adjust the big square thing on the top of the pole by wiggling it around until the lock nut loosens up and you can move the big square thing up and down. Move it down to about one and a half or two inches from the bottom. It should solve the problem.
Question:	Do you have to turn and hold the handle constantly in order to get hot water or can you turn and let go
Answer:	Hi, it will fit. Please check if the water fill is under the tank, it will fit. Thanks!
Question:	How much room is needed behind the spout in order to turn the handle a full quarter-turn? Or, put another way, how far does the handle protrude
Answer:	No, the included flapper and flush valve are designed to work on toilets with 2" flush systems. Your American Standard Champion 4 requires a 3" flush valve and flapper. We recommend the 5030BP Korky 3" Flush Valve and Flapper Kit, and the 528MP Universal fill valve. If you have additional questions or need further assistance with your installation, please call us at 1-800-528-3553.
Question:	What is the difference between this model and h-wave sn-ss model
Answer:	Yes our Complete Kit will fix no/slow refilling, running, and noisy toilets. If you have any other questions please give us a call by dialing 1-800-528-3553. We are available Monday through Friday, 7:30 AM to 5:00 PM CST.

Product features

Complete Instant Hot Water System

Our instant hot water systems pair compact, affordable and stylish faucets with our 750-watt hot water tank for instant gratification at your fingertips.

Designer Faucets

The perfect complement to your main kitchen faucet, an InSinkErator instant hot water faucet sits on the edge of your kitchen sink ready to dispense filtered near-boiling water exactly when you need it. Available in 5 styles, up to 13 different finishes, and hot only or hot/cold models. Tank sold separately.

Hot Water Tanks

Welcome to the heart of your instant hot water system. Although the tank lies hidden below your sink, its contributions to instant convenience can’t be overlooked. The InSinkErator instant hot water tank always has near-boiling water ready when you need it.

Water Filtration

Enjoy safer, better tasting water. Adding an InSinkErator water filter to your instant hot water system ensures that your nearboiling or cold drinking water is healthier and better tasting.

You’d be surprised how useful near-boiling water can be. Whether you’re cooking, cleaning or preparing hot beverages, InSinkErator makes hot water happen instantly.

The perfect complement to your main kitchen faucet, an InSinkErator instant hot water dispenser sits on the edge of your kitchen sink ready to dispense filtered near-boiling water exactly when you need it.

Designed with safety, elegance and functionality in mind, InSinkErator instant hot water dispensers help you save time, space and energy in the kitchen, so you can get on with more important things in life.

Make hot beverages, kickstart boiling, quickly clean dishes, thaw frozen food, serve hot cereals, and clean without harsh chemicals. There are countless ways to use an instant hot water dispenser, but we anticipate that you’ll discover many more.

Product description

Professional classic® tankless electric water heaters offer continuous hot water quick and on demand for single point-of-use or multiple applications

• External adjustable digital thermostatic control with LED display (+/1 degree accuracy
• Durable Copper immersion two heating elements, field Serviceable.Self-modulating power control
• Simple installation – 1/2 NPT adapters included; side 1/2 inch Compression water connections
• 99.8% energy efficient. External controls to adjust temperature in increments of 1°f. Water-Saver Shower Head – 1.5 GPM
• Threaded for easy replacement, simple installation, digital temperature display 54 A. 13kW Model Flow Rate: up to 3.17 GPM
• 54 A

User questions & answers

Question:	We have a 500sq' apt. 1 kitchen sink, 1 lav sink and tub/shower. This tankless heats water to both sinks but nothing to the tub/sh. Help
Answer:	Sinks have aerators to slow down the water where a tub doesn't. It sounds like one possibility is that your exceeding the GPM for this heater. Next possibility, double check an measure your actually getting at least 240v at the heater, I had an issue where my unit was only getting 235v an it was causing a similar issue where only one of the two heating elements was activating. I had it set to 125F but it was coming out 100F. It was warm and without a meter I would of thought it was working correctly until I tried filling a tub. It couldn't even get the water warm. I pulled my wires out an restripped an cut an screwed them in an it fixed my problem, now its measuring around 245v. Make sure there is no copper showing after screwing down your input wires. Now filling the tub I noticed after about 10-15 seconds the water gets too hot to touch. I set it to 135F.
Question:	Do these tankless water heaters require an overflow line to the outside of the home or a pan like is required on normal water heaters
Answer:	No tank, so, no overflow line required. It mounts on the wall. A pan is needed if required by building code in your city.
Question:	what are the wiring and power requirements
Answer:	good morning,60 amp breaker and , number 6 cable !thank you have a great day!
Question:	How many amps are needed for rheem rtex - 13 240v heating tankless electric water heater
Answer:	Hello-The RTEX-13 requires 1x 60A@240V breaker / 6 AWG recommended wire size.Specs - http://cdn.globalimageserver.com/fetchdocument-rh.aspx?name=Specification-Sheet&id=fc3235b7-7cd0-42cd-93bc-7169ea92be31 Rheem 800-432-8373I hope this helped :)Ben

Product features

About Us

Brothers Richard and Donald Rheem founded Rheem Manufacturing Company in Emeryville, CA, in 1925. While the company has produced a number of products in its nearly 100 years of operation, Rheem is currently the manufacturer that produces heating, cooling, water heating, pool & spa heating and commercial refrigeration products, and it is one of the largest manufacturer of water heating products in North America.

Product description

Configured for cold climates or high flow rates. Well suited where incoming water temperature can drop below 45 F. For use in more demanding water usage applications. Self modulating flow sensor technology regulates the amount of energy required to heat the water needed. Digital temperature display showing the outlet water temperature setting. Uses 9 KW standard Emerson electric heating elements with brass tops to prevent electrolysis. Copper heat exchanger. Automatic resettable thermostat. 40 DP breakers required. 112A draw. Required wire: 3 sets 8 AWG. Pipe fitting: 3/4'' NPT. Energy efficiency: 99.8%. UL and CSA certified.Weight: 11 lb. Lifetime warranty. It can provide between 2.7 and 6.5 gallons-per-minute depending on the inlet water temperature.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature can reach as low as 37 degrees. The ECO 27 is capable of heating nearly 3 gallons per minute at this temperature. The ECO 27 is the largest electric tankless water heater available with Patented Self Modulating Technology. This model is well-suited for homes in the northern U.S., Canada, and in the southern U.S. for large Roman-style or Jacuzzi tubs that generally have more demanding water usage needs. Digital temperature control allows you to set your temperature in increments of 1 degree. Prior to purchase and installation please verify that this model is the right size for your hot water needs and electrical requirements.

• Savings of up to 50% on water heating costs. Dimensions :17H x 17W x 3.625D inches ;Pipes fittings :3/4 inch NPT
• Digital temperature control in 1-degree increments allows control of hot water; Activation Flow: 0.3 GPM
• Copper and stainless components designed for efficiency, durability and easy replacement.
• Compact size saves valuable storage space, while the stylish and advanced design is pleasing to the eye and Copper and stainless components designed for efficiency, durability and easy replacement.
• Prior to purchase & installation, please verify that this model is the right size for your hot water needs and electrical requirements. Electrical requirements: 27 kW, 240 volts, 40 required breakers, 112.5 maximum power (AMP), 8 required wire.Amperage Draw:113 A
• Required Breaker Quantity: Three 40 Amp Double Pole
• Recommended Electrical Panel: 200 Amps

User questions & answers

Question:	How do know which size to buy? We will supply two bathrooms, dish washer, clothes washer. What size should I choose
Answer:	In order to have a 208 volt power you would need to be pulling off of 2 legs of a 3 phase service. Are you sure you have 3 phase?
Question:	Can this unit supply a 3,700 sq foot home with 3 1/2 baths
Answer:	Approx 7x11. The cover is approx 8x12
Question:	What is the power consumption of this tank-less heater
Answer:	This is a 240V/208V heater. At 240V this heater draws 6.25 amps.
Question:	remote
Answer:	Are you asking if it can be wired 208 volt? The answer is yes. I don't have any experience with model you are referring to otherwise.

Product features

3 Smart Steps for Endless Hot Water

Step 1: Determining your average inlet water temperature is important, this allows you to determine how well your unit will perform in your desired location. A lower inlet water temperature will require a higher kilowatt product.

Step 2: Next you will determine how many applications your unit can run simultaneously at your chosen location inlet water temperature. Tankless electric water heaters are sized for maximum simultaneous use, not maximum fixtures in your home.

Step 3: Determining specifications and electrical infrastructure is important because without the correct infrastructure your unit may not fit into your breaker panel.

• 2 PCs 16” long 1/2”FIP x 1/2”FIP,Stainless steel water hoses ,Vent valve,included
• 【NOTE】The cold water pipe has a safety valve, which is marked with a water pressure of 0.75MPa. When the water pressure in your home is greater than this value, the safety valve will automatically drain. At this point, you only need to contact us, we will send you a 0.9MPa exhaust valve, you can solve this problem
• 【SAFE DURABLE & LONGEVITY】Made of stainless steel and never rust，Anti-leakage plug，Multiple safety protection functions protect you from the risk of scald, leakage or other injury.Premium plastic shell is corrosion resistant，This mini hot water heater is ideal for kitchen, bar, school, hospital, community and RV.
• 【SMART INVERTER FOR ENERGY SAVING】Automatic heat preservation and storage of hot water, 2.5 gallon point-of-use mini-tank fits under your sink to provide hot water right where you need it. Thermal efficiency is 98%，Maximum temperature167℉，The built-in smart chip heats up to the temperature you set, and automatically Insulation when heated to the specified temperature.
• 【EASY TO USE】storage tank electric water heater with easy-to-operate knob temperature adjustment design，Easy to control warmth.Vent valve, Tee pipeline， pipes and other accessories are complete for quick installation without additional expenses or preparing time of accessories.
• 【FAST RECOVERY RATE】Eliminates long waits for hot water at your sink, get on demand hot water at your every need (supplies up to 2 sinks at a time，8-15 minutes to heat to your desired temperature).
• 【COMPACT DESIGN】Can be shelf, wall or floor mounted (Water inlet and outlet upward); Dimensions: 13.0''L x11.4''W x10.6''H; 9.5lbs; 1/2″NPT NPT. 1.5 kW, 110-220 volts. One-year warranty and 24H customer service support, feel free to contact us.

User questions & answers

Question:	How is it that this is energy efficient if it constantly maintains a heating temperature that you can use on demand? Is there an off/on switch
Answer:	Most rinnai tankless weather it is out door or indoor, have a control board to adjust temp and either on or off
Question:	I connected the water in the water heater already. But the pressure didn’t pumt the water to the sink
Answer:	It can definately be out doors in freezing temps, tho power failure arent good for it while in a freeze, tho keep in mind it will use alot more energy for frost protection, indoor units are safer amd more efficient in this case
Question:	Can I connect the water intake on this unit from the hot water supply from my house water heater? The house heater is very far from kitchen sink
Answer:	I bought model V65EN. It came with a wired digital controller. The installer did not run the wire into the house and mount the controller indoors. He simply set the controller at 120 degrees and left the controller inside the unit. If I want to change the temp, I have to take the cover of the unit.
Question:	Will this work for an outdoor shower
Answer:	Good place to check for info like this is Wikipedia. Here is what they say: Energy efficiencieseditMore tangible cost savings are defined when comparing the energy efficiencies of gas heaters with low NOx emissions with conventional flued types. Gas heaters with emission problems are flued and inherently lose substantial energies in the form of hot flue gases to the atmosphere. In addition, the choice of placement of flued heaters is greatly impaired due to flue installation restrictions.In contrast, dedicated low emission gas heaters do not require a flue system. Furthermore, with the introduction of oxygen depletion sensors and thermostatic controls, they do not place critical reliance on ventilation as previously was the case. These heaters can be positioned more conveniently and centralised to affect optimum warm air distribution. By definition unflued low NOx gas heaters are 100% efficient as all heat energy released from the flame is converted to useful heat.Hope this helps. June

Product features

BIS 1.5Kw Mini-Tanks Water Heater Electric

Features

Saves Energy and Money - No need to preheat before using,no any waste for water or electricity.

Endless Hot Water - Maintenance-free bare wire heating systems.Depending on the region, the water temperature can be heated to 167℃ within 8-15 minutes.

Space Saving - Very compact designed, which can be wall-hung (bracket included) or floor-mounted，easy to install.

Hot water on call

Waiting for hot water at a sink located far from a primary heating source can be frustrating. Only having access to cold water from a sink is just not useful, and plumbing a hot water line to every sink in a home or business requires time and money. To get hot water where it’s needed, when it’s needed, a better solution is to use the BISELONG: a point-of-use electric mini-tank heater. This heater can supplement a primary water heating source, or be used under a single sink and double sink. In fact, the BISELONG can be used for three different applications: as a sole water heating source for a single sink, as a supplement to an existing heater located far from the sink, and as a buffer installed in-line with tankless water heaters that experience intermittent cold water, also known as 'cold water sandwiching'. No matter the configuration, there’s minimal stand-by loss from this premium mini-tank water heater.

INSTANTLY HOT WATER

As soon as you open the tap, the water flows with your desired temperature. The water is only heated in the amount and for the time you actually need it.

ENERGY EFFICIENT

It saves energy by producing hot water only when needed. Instant hot water flows out at anytime you need.

KNOB ADJUSTMENT

Equipped with a Knob adjustment control for stable temp. easy and convenient. Just turn the knob to the maximum and submit the temperature suitable for you through the faucet，Optimal energy efficiency is promised.

GREAT FOR SMALL SPACES

Water heaters are compact，It can be installed under the sink features a sleek and attractive design to blend seamlessly with decor, very friendly to any small spaces.

Product description

The Watts Hot Water Recirculating Pump provides hot water at every faucet or shower when needed, eliminating wasted water and saving up to 15,000 gallons per year. It is easy to install on any water system and requires no additional piping. The unique design of the pump ensures quiet, maintenance-free operation. The system includes a built-in 24 hour, a dual setting programmable timer to activate the pump only when needed. Please note this will not work with a tankless water heater.

From the Manufacturer

The Watts Premier hot water recirculation pump puts hot water at every tap when you want it. Saves up to 15,000 gallons per year. The pump brings convenience and savings to your home, giving you hot water instantly at every faucet, when you need it. This unique product is easy to install and not only provides you with the convenience of hot water when you need it, but saves an average of over 11,000 gallons per year. *May not work with a tankless water heater.

• Kit includes a pump with timer with 10' cord, 2 adapters with rubber washers, valve mounting screws, sensor valve, and two 12-inch supply lines
• Voltage: 120 volts, Item Weight: 8.5 pounds. Overall Dimension: 6.2 x 6 x 5 inches
• Provides hot water at every faucet or shower when needed and helps eliminate wasted water
• Easily installs to existing plumbing and is maintenance-free
• 24-hour programmable timer activates pump when you need it

User questions & answers

Question:	How many amps is the pump
Answer:	The pump runs at .22 Amps, and recommended supply current of 2.5 Amps. A standard 15 Amp wall socket is all that you need to plug it into. The .22 Amps the pump indicates maximum start up current, actual running current will be somewhat lower. Inrush current is always higher, when the motor has to start up, actual running current will be lower, example a 1 HP motor will have an inrush current of about 34 Amps, just until the motor reaching normal operating speed then it drops down to around 7.5 Amps, quite a bit lower, but the breaker needs to be able to handle the inrush currents.
Question:	can i used without the sensor valve
Answer:	Yes.As long as you have a return line running back to your water heater. You do not need a separate return line at every faucet. You need one return line. Follow your hot water pipe to the end (last branch takeoff), cut in a tee and run pex or copper. At the bottom of your tank style water heater there is a small, usually plastic valve. Remove that valve and screw in a 3/4" brass or stainless pipe nipple. Then install a tee inline with side outlet looking up and in the end of the tee put a brass drain valve to replace the crappy plastic one if applicable. The side connection on the tee you installed is where you will connect your return line you just ran. I did not notice if this pump had a built in check valve but if not you may want one to prevent water from flowing through both the hot water main and the hot water return to the faucet nearest the end. Water will follow the path of least resistance so the last branch on the main usually ends up being similar in distance to the water heater from either line. As a result water can back feed up the return line and will bring the cold water entering the tank with it. This is especially true when a second source of hot water is being used at the same time hence the need for a check valve.
Question:	If the pump is on, and the water is hot, the sensor valve closes, right? Isn't the pump trying to push water against a totally closed line
Answer:	This type of pump is designed to operate with zero flow, and it actually uses a little less electricity when it is not moving water. When the sensor valve closes, the pump does not move any water. When the sensor valve reopens, the pump moves water from the hot water line into the cold water line.
Question:	So what this does is move the hot water through the pipes constantly, not just when you need it? Seems like an energy suck. Is it
Answer:	If you run this all the time you will likely increase your water heating costs significantly as you are turning your pipes into a big radiant heater. You can use the built in timer to only have it come on at set periods, but this will only work if you have a very fixed schedule. I attacked this another way. I plugged the unit into a TP-Link HS110 Smart plug that is Alexa controlled. I can just say turn on hot water pump or turn off hot water pump when I want to control it. But that was not good enough for me. I found that if this pump ran for four minutes it would give me hot water at the distant shower that I wanted, so I did the following. I wrote a routine to turn on the pump, wait four minutes and then turn it off. While I can run this by voice, I bought the new Amazon Alexa Button, they are about $14 for a two pack. The button is battery operated and communicates to another Alexa device. Just before I take a shower I push the button and within four minutes the water will be hot without having to run water.

Product features

Includes Everything Needed

Pump with timer and 10 ft. electric cord, two adapters with rubber washers, valve mounting screws, sensor valve, two 12 in. supply lines

Easy Installation

Easy to install, usually less than one hour.

Save Money

Save money, up to 10% of your water bill annually.

Product description

OVERVIEW: Being one of those limited choices with smart modulation heating, ECOTOUCH ECO90 tankless water heater provides instant & endless hot water with optimal thermal efficiency of 99.8% and minimum energy cost, thus, the tankless water heater heats up 1.5GPM water from 67℉ to 106℉ and will sure cut your electric bill. Designed with sturdy structure, it is a perfect solution for kitchen & bathroom sinks, dishwasher and washing machine and you could use it for shower purpose in southern area. MULTIPLE SAFETY PROTECTIONS: Over temperature protection Dry heating protection Leakage protection Water and electricity line separated ETL Approval SPECIFICATIONS: Color: Black Voltage: 240V~60Hz Wattage: 9kW Required Circuit Breaker : 1x 2-Pole 40 AMP Min Wire Size: 8 AWG/2 with Grounding Max. Amperage: 37.5A Minimum Water Flow to Activate: 0.5 Gallon/min Operating Water Pressure: 2.9PSI-87PSI Water Connection : 1/2" NPT Dimensions, Weight: 15.74" (H) x 10.24" (W) x 2.05" (D)，12Ibs KINDLY NOTE: 1.The unit is mainly for sinks ,dishwashers and washing machines, shower only applies to southern area of the United States. 2.Recommended to install a filter at the inlet to extend the service life of the water heater. 3.The tankless water heater should be installed professionally. 4.Please read instruction manual carefully prior to installation and use! 5.We will do best to serve and help at anytime necessary. PACKAGE INCLUDES: 1X ECO90B 9kW Instant Water Heater 1X Instruction Manual 1X Installation Accessories

• 【INSTANT & SUFFICIENT HOT WATER】Applied with 9kW heating system, the electric tankless water heater ECO90B supplies instant & endless hot water of 116℉or higher temp, no waiting for preheat nor temperature fluctuations, perfect companion for sinks, bringing you perfect experience of comfort and relaxing.
• 【SMART SELF MODULATION】The on demand electric water heater ECO90B adjusts power input based on flow rate and temp setting in real time. As water flow reduces, power input decreases, thus you still get ideal, comfortable temp instead of scalding hot water. Optimal energy efficiency 99.8% saves considerable electricity charge per year.
• 【UPGRADED HEATING SYSTEM】Featuring micro-computer control and patent heating technology, ECO90B electric water heater promises no “cold water sandwiching”. And unique heating element avoids any corrosion inside pipes so as to extend service lifespan.
• 【SAFE AND DURABLE】Applied with multiple protection devices, every piece ECO90B tankless water heater goes through strict tests to ensure 100% safety. Inner water and electricity lines are designed to run separately so as to avoid leakage or harm of scale build up. Approval by ETL and qualifies for UL, you can expect outstanding performance for years to come.
• 【CONVENIENT USE】The ECO90B electric tankless water heater comes with digital display & touch control panel so temp setting is an easy job. It's space saving, measuring: 15.4″(H) x 10.3″(W) x 2″(D). Plus it has a stylish, modern design that blends in any decor. Please verify it is the right size for you: 9kW@240V; pipes fittings: 1/2" NPT.

Product features

INNOVATION, OPTIMIZATION, ENERGY-SAVING

With rich experience of 20 years in appliances industry, ECOTOUCH Appliances is associated with advanced technology, quality craftsmanship, reliability and attractive features design, which offers brand new life style of being easy, efficient and enthusiastic.

We are dedicated to innovating and offering user-friendly & energy saving appliances that base on extensive consumer research and follow strin-gent quality standards, meeting your requirements at the very best value for your budget.

Electric Tankless Water Heater，Endless Hot Water for Dear Families

Being one of those limited choices with smart modulation heating, ECOTOUCH ECO90 tankless water heater provides instant & endless hot water with optimal thermal efficiency of 99.8% and minimum energy cost, thus, the tankless water heater heats up 1.5GPM water from 67℉ to 106℉ and will sure cut your electric bill.

Designed with sturdy structure and sleek appearance, ECOTOUCH ECO90 tankless water heater is a perfect solution for kitchen & bathroom sinks, dishwasher and washing machine and you could use it for shower purpose in southern area of USA.

Instant hot water and endless

As soon as you turn on the hot water heater, hot water comes out immediately with desired temperature and sufficient flow rate of 1-1.5 gallon per minute, no waiting for preheating or standby energy loss. The best part is you get endless hot water now at anytime you need.

Smart modulation and energy saving

Equipped with a smart modulating control for stable temp, the ECO90 hot water heater adjusts exact power input according to power calculation based on flow rate and temp setting in real time, which means you get still stable temp, instead of scalding hot, when you reduce flow rate. Thus, it provides you optimal energy efficiency.

Easy installation

Wall-mounted design frees up floor space for storage, easy to install in bathroom, kitchen and storage room, no venting is required. Comes with easy installation brackets, standard pipe fitting of 1/2" NPT and 8AWG power cord(fixed to the unit) so you don't to have to hire a plumber even if you can do it.